HD110-3 Hydraulic Crawler Drill

HD 110-3 Hydraulic Crawler Drill

HD110-3 Hydraulic Crawler DrillMachine Modules

HD202 is a heavy-duty and versatile drillrig, powered by 204 HP engine, withsuper high pull-back (15 tons) on the drillmast. This fully hydraulic crawler drill isbuilt to be sturdy, simple and reliable, andwith high drilling performance. The 360degree turn-table enables the rig tomanoeuvre well in difficult workingenvironments and confined areas,furthermore to quickly engage to differentdrilling positions. With the simple and yetefficient hydraulic system, the rig can bemounted with high-torque rotator,powerful drifter, for various drillingrequirements. It is designed and built fordifferent large diameter drillingapplications, heavy-duty drillingenvironments, as well as anchor drillingapplications.

Hydraulic Rotator

Hydraulic Double Clamp

HD110-3 is a light-weight yet sturdy drill

rig. The swing boom enables it to move

into different drilling positions easily and

quickly, even in confined job site. With

the heavy duty high pullback drill mast

and the 140HP engine, the drill rig can be

mounted with high-torque rotator (up to

2,340 kgm torque) and hyd. drifter,

suitable for different drilling systems and

different drilling environment.

The two optional items, side swing

device and mast extension, enhance

the flexibility and practicability, and

enable more movements for the rig, also

allowing the use of 6 m long drill rod.

Control Panel with height adjustment

Hydraulic Drifter

Side Swing Device

Remote Control for

tramming Function

Mast Extension

(for 6m long drill rod use)

Optional Features

Service Weight Approx. 12,500 kg [27,560 lb]

Drive Diesel Engine

Power Rating = 106 kW (142HP) @ 2,200 rpm

Hydraulic System Variable Load Sensing Pump + Gear Pump

Max Pressure 250 Bar [3625 psi]

Q1 = 168 l/min. [44.3 gal(us)/min]

Q2 = 168 l/min. [44.3 gal(us)/min]

Q3 = 38 l/min. [10 gal(us)/min]

Q4 = 26 l/min. [6.9 gal(us)/min]

Hydraulic Oil Tank Capacity 320 l [84.4 gal (us)]

Fuel Tank Capacity 170 l [44.9 gal (us)]

Mast And Feed Assembly Mast Length

Stroke Length

Feed Force

Pullback Force

Feed Speed

Retract Speed

: 6,000 mm [19.7’]

: 4,100 mm [13.5’]

: 8,000 kg [17,640 lb]

: 8,000 kg [17,640 lb]

: 0.73 m/s [2.4 ft/s]

: 0.73 m/s [2.4 ft/s]

8,700 mm [28.5’]

7,100 mm [23.3’]

Rotator (HR2400)

Rotary Speed

Torque (kgm)

Toque (ft lb)

Stage 1 Stage 2 Stage 3 Stage 4

: 18 rpm 37 rpm 33 rpm 67 rpm

: 2,436 kgm 1,218 kgm 1,948 kgm 974 kgm

: 17,619 ft lb 8,810 ft lb 14,090 ft lb 7,045 ft lb

Winch Lifting Force

Line Speed

Wire Size

Drum Capacity

: 2345 kg [5,170 lb]

: 23.4 m/min [76.8 ft/min]

: Ø 12 mm [0.47”]

: 46 m [151 ft]

Hydraulic Double Clamp Model

Clamping Force

Clamping Range

Break-out Torque

: MOD176A

: 23,000 kg [50,705 lb]

: Ø 50 to Ø 273mm [2.5” to 10.75”]

: 3,074 kgm [32,545 ft lb]

(Bigger clamp is possible upon request)

Crawler Undercarriage Specific Ground Pressure

Max. Travelling Speed

Climbing Ability

: 0.73 kg/cm2 [10.38 psi]

: 0-1.5 km/h [0.93 mph]

: 20°

Dimensions

(while mast down to horizontal)

Length

Width

Height

: 7,720 mm [25.3 ft]

: 2,230 mm [7.3 ft]

: 3,140 mm [10.3 ft]

Note : - Specifications are subject to change without notice in accordance with HD Engineering’s policy of continuing development.

- All data contained in this brochure are indicative and does not take power losses and efficiency losses into account.

HD110-3 Hydraulic Crawler DrillSpecification

Optional, Long Mast

All Dimensions in mm



HD110-3 Hydraulic Crawler Drill

Mast Tilting Range

(Mast Shifting Cylinder In Fully Retracted Position)

Articulation Schematics

Boom Tilting Range (Mast In Vertical)(Mast Shifting Cylinder In Fully Extended Position)

Mast Rotation Range

Boom Tilting Range (Mast In Horizontal)

(Mast Shifting Cylinder In Fully Extended Position)

Oscillating Range of Tracks

Side Drilling Range

Swing Boom Range

Mounting Point

Changed

Mast Shifting Range





Mast Tilting Range

Articulation Schematics

Side Swing Range

Boom Tilting Range (mast in Horizontal)

(Mast Shifting Cylinder in Fully Extended Position)

Mast Rotation Range

Angle Drilling

Side Drilling Range

Mast Rotation Range

With 8700mm Long Mast

(Optional Feature)

With Side Swing Device (Optional Feature)

Applications

• Foundation Pile Hole

• Retaining Wall Drilling

• Pre-boring for Pile

HD110-3 Hydraulic Crawler DrillJob Site Photos

• Anchor Drilling

• Soil Nail Hole

U.S.A. – Ground Zero, New York – DTH Hammer Drilling Hong Kong – Pipe Pile Wall Ø 273mm

Hong Kong – DTH Hammer Drilling Ø 406mm (Low Headroom) U.S.A. – Anchor Drilling Ø 219mm

Canada – Pipe Pile Wall Ø 219mm U.S.A – Anchor Drilling Ø 133mm

Hong Kong – DTH Hammer Drilling Ø 273mm

(with mast extension for 6m long drill rod use)

Hong Kong – DTH Hammer Drilling Ø 324mm

• Anchor Hole

• Water Drainage Hole

HD200Machine Diagram

HD110-3-V1-0720016


No. 21 Yip Wo Street, On Lok Tsuen, Fanling, N.T., Hong Kong

Tel : (852) 2675 4789 E-mail : [email protected]

Fax : (852) 2677 4536 Web-site : www.hdengineering.com


HD

110-3

Pos. Description

1. Mast Crown Block

2. Feed Motor Assembly

3. Hose Guide Assembly

4. Guide Carriage Assembly

5. Flushing Head Assembly

6. Rotator

7. Side Shifting Device

8. Mast Shifting Cylinder

9. Mast Rotation Device

Pos. Description

10. Control Arm

11. Hydraulic Winch

12. Mast Tilting Cylinder

13. Boom

14. Boom Raising / Lowering Cylinder

15. Hyd. Double Clamp Assembly

16. Crawler Undercarriage Assembly

17. Leveling Jack

18. Upper Structure

Pos. Description

19. Pendulum Cylinder

20. Boom Swinging Device

21. Fuel Tank

22. Oil Tank

23. Oil Cooler

24. Pump Set

25. Diesel Engine

26. Crawler & Engine Control Panel

27. Front Outriggers

Documents

HD110-3 Hydraulic Crawler Drill