Embed Size (px)
Citation preview
HEALTH & SAFETY PRODUCTS
The VPB1 visitor pass book enables you to quickly register visitors to your site whilst complying with the various OH&S Regulations and Privacy Act.
The CPB1 Contractor Pass system has been purposely designed for the efficient handling of contractors on your site.
Visitor & contractor pass books can be designed and printed to meet your branding & OH&S procedural requirements. Custom printed passes are attached to standard pre-printed privacy sheets and custom printed& numbered register sheets.
Info Required To Quote• Quantities - Visitor pass (in 250’s)
Contractor pass books (in 120’s). • Number of printed colours on
front of pass.• Number of printed colours on
reverse of pass.• Design work required.• Delivery location.
VPB1Visitor Pass Book
CPB1Contractor Pass Book
CUSTOMVisitor & Contractor Pass Books
VPBI1 Visitor Pass Introductory Pack
The VPBI1 visitor pass introductory pack is all you need to set up a visitor management system at your Reception.Each pack comes with a VPB1 visitor pass book and 20 PVC pass holders & strap clips.
CPBI1 Contractor Pass Introductory Pack
The CPBI1 contractor pass introductory pack is all you need to set up a contractor management system at your site.Each pack comes with a CPB1 contractor pass book and 20 PVC pass holders & strap clips.
Visitor Pass Books
These lanyards are made out of a 15mm red polyester fabric and come with a vibrant white screenprinted ‘VISITOR’ on both sides of the fabric. The lanyards also feature a Breakaway Clip (to help prevent a choking incident) and a heavy duty swivel clip to easily attach a PVC holder.
These lanyards are made out of a 15mm green polyester fabric and come with a vibrant white screenprinted ‘CONTRACTOR’ on both sides of the fabric. The lanyards also feature a Breakaway Clip (to help prevent a choking incident) and a heavy duty swivel clip to easily attach a PVC holder.
Soft PVC pass holders + strap clips with incorporated safety pins for easy lapel attachment. Single compartment. Holds passes up to 90mm x 110mm. Pack of 50.
LY01Red Visitor Lanyards
LY02Green Contractor Lanyards
LH03PVC Pass Holderswith Strap Clip
Lanyards and Pass Holders
Soft PVC pass holders . Single compartment. Holds passes up to 90mm x 110mm. Pack of 50.
LH05PVC Visitor Pass Holders
The Take 5 book (also known as a SLAM, Start Card, Stop and Think pad, SafeCheck, Take Time and more), is a pocket sized personal planning tool developed to help eliminate accidents from the workplace.
The Take 5 book is a cost effective way of promoting a safer working environment for your organisation.
The Take 5 books come in packs of 5.
The Take 5 wallet protector is designed to hold the Take 5 book, providing added protection from the working environment.
145mm x 90mm (portrait) when folded and 145mm x 195mm when open.
Take 5 Books are essential tools in helping to reduce workplace accidents.
We can produce these pocket sized books in a range of sizes and formats. Most books contain checks, risk calculators, controls and more. We can supply them in pads, bound books or encased in PVC shells.
Info Required To Quote
• Book quantities (min 50).
• Dimensions.
• Number of parts i.e. single sheets, two parts...
• Number of sheets/sets per book.
• Number of colours printed on pages & covers.
• Binding type (gluing, stapling, quarter binding,wiro binding and plasticoil binding).
• Numbering required.
• Design work required.
• Delivery location.
T5B01Take 5 Books
T5WTake 5 Wallet
CUSTOMTake 5 Books
Take 5 Books
The Forklift Pre-Start Checklist book helps you identify any faults with your forklift before starting forklift operations. The checklist is quick and simple to use and guides you through a series of checks to ensure the safe operation of the forklift. Ergonomic A5 sized book (210mm x 148mm). x52 duplicate checklists sets per book (one for every week of the year).
The Light Vehicle Pre-Start Checklist book helps you identify any faults with your vehicle before starting vehicle operations. The checklist is quick and simple to use and guides you through a series of checks to ensure the safe operation of the vehicle. Ergonomic A5 sized book (210mm x 148mm). x52 duplicate checklists sets per book (one for every week of the year).
Safety starts before you even start your machinery. Pre-start checklists are essential tools for ensuring that your employees thoroughly assess all aspects of a piece of equipment or workplace environment. Checklists can greatly reduce the occurrence of any accidents in your workplace.
Info Required To Quote
• Quantity required (min 5 books).
• Dimensions.
• Number of parts i.e. single sheets, two parts...
• Number of sheets/sets per book.
• Number of colours printed on pages.
• Binding type (gluing, stapling, quarter binding, wiro binding or plasticoil binding).
• Numbering required.
• Design work required.
• Delivery location.
PCF1Forklift Pre-Start Checklist Book
PCLV1Light Vehicle Pre-Start Checklist Book
CUSTOMPre-Start Checklists
Pre-Start Checklists
• 25 tags per pack.• The tags come in a convenient resealable packet, which has a hanger hole for easy storage.• The tags are printed in two colours on a tough 180 micron polypropylene synthetic paper which is tear resistant, waterproof, long lasting
and recyclable. • Each asbestos tag comes with a metal eyelet and is pre-strung with a 200mm length of string.• Designed & printed in Australia.
Safety Tags
Safety tags are a crucial tool in helping to keep a safe working environment. Safety tags can come in many different formats depending on their particular usage. We produce all different types of safety tags; Warning tags, Repair tags, Lockout tags, Do Not Operate tags, Confined Space tags, Valve tags and more.
Info Required To Quote• Quantity required.• The tag dimensions.• The number of colours to be printed on either side of the tag.• Tag stock required. (Papers, cards, synthetic papers, films and
plastics)• Eyeleting required.• Stringing required.• Numbering, perforating or die cut shapes required.• Design work required.• Delivery location.
TAGW1Warning -Out of Service Tags
TAGD3Danger -High Voltage Tags
TAGW2Blank Warning Tags
TAGD4Danger -Flammable Tags
TAGW3Warning -Corrosive Tags
TAGD5Danger -Asbestos Tags
TAGW4Warning -Toxic Tags
CUSTOMSafety Tags
TAGD1Danger -Do Not Operate Tags
TAGD2Blank Danger Tags
• A0, A1 and A2 sizes available.• Printed on a 190gsm art bond paper.• Matt or gloss lamination available.
Safety Posters
P10001Wear Safety GlovesThe Wear Safety Gloves safety poster features Safety Steve about to cut his fingers with a scalpel. The poster has been designed to highlight the need to wear your safety gloves when using knives.
P10004Be Sun SmartThe Be Sun Smart safety poster features Safety Steve working hard in the sun. The poster has been designed to highlight the need to remember the 5 S’s when working in the sun.
P10002Don’t Guess, Check The MSDSThe Don’t Guess, Check The MSDS safety poster features Safety Steve about to clean up a potentially toxic mess. The poster has been designed to highlight the need to always check the MSDS before cleaning up a chemical.
P10005Report All Near MissesThe Report All Near Misses safety poster features Safety Steve about to be hit by a falling box. The poster has been designed to highlight the need to always report a near miss, which can help prevent accidents happening in the future.
P10003Get NoticedThe Get Noticed safety poster features Safety Steve walking safely around the factory. The poster has been designed to highlight the need to always wear your high visibility clothing at all times.
P10006Take 5 & Stay AliveThe Take 5 & Stay Alive safety poster features Safety Steve conducting a Take 5 with a number of nearby hazards. The poster has been designed to highlight the need to follow the 5 steps when completing a Take 5.
CUSTOMSafety PostersSafety posters are a great way of informing your staff of any relevant OH&S issues around the workplace. Warning posters, checklist posters, how to posters and more. Kalamazoo can design and print your safety posters to meet your exact requirements.
Info Required To Quote• Quantity required.• Poster size.• Colour or B/W.• Poster stock required. (Bonds, Fluro & Coloured Papers, Tracing Papers,
Double Clear Acetates, Polyester Films and more.)• Matt or gloss laminating if required.• Block mounting if required.• Design work required.• Delivery location.
Custom PrintSafety StickersSafety stickers are a crucial tool in helping to keep a safe working environment. Safety stickers can come in many different formats depending on their particular usage. We can produce different types of safety stickers; Warning stickers, Repair stickers, Lockout stickers, Do Not Operate stickers, Confined Space stickers, Valve stickers and more.
Info Required To Quote• Quantity required.• Sticker dimensions.• Number of colours
to be printed.• Sticker shape.• Stock required. Standard label,
UV resistant etc.)• Design work required.• Delivery location.
Manuals, Handbooks & FoldersWith so much information available it often becomes necessary to collate all your OH&S documents into a handbook or manual. Examples include site safety manuals, OH&S introduction handbooks, MSDS folders and more.
Info Required To Quote• Quantity required.• Document dimensions.• Colour or B/W.• Binding method.• Stock required. • Folders required.• Design work required.• Delivery location.
JSA/JSEA FormsJob Safety Analysis (JSA), also known as Job Hazard Analysis (JHA), Activity Hazard Analysis (AHA) or Risk Assessment (RA), is a safety management tool in which the risks or hazards and respective controls of a specific job in the workplace are identified and then recorded in a logical format.
Info Required To Quote• Quantity required.• Dimensions.• Number of parts per book.• Number of sets per book.• Number of colours to be
printed on front & reverse of sheets.• Stock required.• Binding method.• Finishing required (numbering, hole punching etc.)• Design work required.• Delivery location.
Work PermitsPermit to work systems are used to control staff, visitors, contractors and anyone else who may engage in hazardous activities around the workplace. A permit to work should be written by an issuing officer and should include all identified hazards and controls for a particular task.
Info Required To Quote• Quantity required.• Dimensions.• Number of parts per book.• Number of sets per book.• Number of colours to be
printed on front & reverse of sheets.• Stock required.• Binding method.• Finishing required (numbering, hole punching etc.)• Design work required.• Delivery location.
Incident/Injury ReportsIt is a standard requirement that all injuries, incidents and hazards are properly reported, investigated and acted upon. We can design and print your incident/injury reports to your exact requirements.
Info Required To Quote• Quantity required.• Dimensions.• Number of parts per book.• Number of sets per book.• Number of colours to be
printed on front & reverse of sheets.• Stock required.• Binding method.• Finishing required (numbering, hole punching etc...)• Design work required.• Delivery location.
Contact Details
