Heavy Duty Equipment - Groupe · PDF fileSet includes 8", 12", 18", and 24", 32", 36" bar shank lengths, in a gray molded tray. OTC-8245 45" Handled Pry Bar Pry Bars OTC-7687A

30 août au 29 octobre 2010 • August 30 to October 29, 201023

OTC-183325-Ton Shop Press• Raise and lower bed

easily on this tough, economical pressthat is ideal forpressing rear axlebearings, pistonpins, and more

• Includes hand pump(OTC No. 4002) and6-1/4" stroke ram

OTC-5268 20-Ton Truck Ramps (Pair) • 33" retractable T-handle enhances mobility• Capacity per pair: 20 tons;

overall length: 51"; tread width: 10"

OTC-5269 20-Ton WIDE Truck Ramps (Pair)• For wider front wheels (cement, dump,

garbage trucks)• Overall length: 51"; tread width: 16"

OTC-1770ADual Wheel Dolly• Hydraulic jack

provides almost 5" of lift and tilts wheel assem-bly 4° to pre-vent damage to wheel seal

• Swivel casters• 6' chain holds load in place

OTC-5105A1,500 Lbs Capacity High Lift Dual Wheel Dolly• Air-powered hydraulic

lift system for a varietyof applications

• 0" to 42" lifting range• Tilt adjustment of +15°

to -8° ensures easyalignment

• 4 swivel casters, 2 locking

OTC-1580Easy Roller™ Vehicle Positioning System• 1500 lbs capacity per unit• Fits tread widths up to 12"• Hydraulic mechanism

with locking pin

Heavy Duty Equipment

OTC-1572Car Dolly (Pair)• Clamps directly to pinch welds

to prevent slippage during use• Universal design• Each unit has a capacity

of 1800 lbs with a height range of 9" to 14"

OTC-20022000 Lbs Capacity Foldable Crane• Reach: 25" to 46"• Front wheels: 3.5"• Rear casters: 5-7/8"

OTC-1726A1,000 Lbs Capacity Engine Stand• Four adjustable attachment arms make

engine mounting fast and easy• Engine can be rotated a full 360° with a

turn of the handle; a locking pin securesthe work in any of eight positions

• Two rear wheels lock tightly to anchor the stand in place

• Easy one-bolt disassemble for transport of stand

• OTC Lifetime Marathon Warranty

OTC-82033 Piece Blue Force Handled Pry Bar SetSet includes 12", 18", and 24" bar shanklengths packaged in a gray molded tray.

OTC-82066 Piece Blue Force Handled Pry Bar SetSet includes 8", 12", 18", and 24", 32", 36"bar shank lengths, in a gray molded tray.

OTC-824545" Handled Pry Bar

Pry Bars

OTC-7687APry Bar Head• Turns any 3/8" drive ratchet or break-

er bar into a rolling head pry bar• Gives you the versatlility of a

pry bar without the storageproblems

OTC-43053/4 Ton Capacity Engine Load Leveler• Designed to hook to a crane or hoist to

handle and position large, bulky components

• The horizontal tilt can be adjusted to compensate for off-centerloads, or adjusted to acertain angle for a componentbeing positioned

OTC-1778B12-Ton Low Jack Stand• Height range: 19" to 29-1/2".

OTC-1779B12-Ton High Jack Stand• Height range:

33-3/4" to 44-1/4"

☎

☎

☎

$683.95

$799.95

$179.95

$459.95

$695.95

$339.95

$139.95

$53.95

$22.95

$62.95

$329.95

$366.95

$49.95

24 30 août au 29 octobre 2010 • August 30 to October 29, 2010

STG-30369600VW/Audi Electronic Brake System Service and Re-Set Tool• Required tool for working with brakes on VW Passat,

Tijuan, Audi A6, and Audi A8 from 2005• Electronically move calipers via OBDII port.

Adjust tilt angle, and enter brake pad thickness• Clear codes after doing brake jobs• Without this tool, technicians cannot work on

the brakes for these vehicles• Increases speed of technician in

performing the job• Compatible with CAN vehicles and

updateable

STG-ITCHBFTBrake Flaring Tool• Unique hand-held master brake flaring tool —

easy to use for mobile applications.• Simple and accurate production of automotive-type double flares.• Will even flare steel pipes.• Supplied with 3/16" SAE and 4.75mm SAE DIN dies for most

popular flares. Full range of die and punch sets available.• Self-centering pipe location.

STG-ITC07052-3Ratcheting Cut/Strip/Crimp Tool• Reversible dies crimp insulated

and non-insulated terminals:three dies crimp insulated termi-nals (AWG 24-18) /(AWG 16-10) /(AWG8-2) and non-insulated ter-minals (AWG 16, 10 and 2).

• Additional dies available for other applications.

• Includes professional wire cutter andstripper for 22 to 10 AWG.

STG-ITCCBJCHeavy-Duty Ball Joint Separator• Designed for heavy-duty truck applications.• Ideal for removing stiff or

seized ball joints.• Spreads ball joints where space prevents

the use of direct action method.• Jaws open to 70mm/2.75".• Jaw width: 36mm/1.4"

STG-ITCMSC2000VMcPherson Spring Compressor Set • Upper and lower jaws are fully adjustable

hinged-press jaws that are permanentlyattached to the unit. NO NEED FOR EXTRAADAPTERS!

• Features a slide-activated, spring-loaded safety locking device on both the upper andlower jaw bases. The jaws clamp the coilspring to keep it from ejecting in the unlikelyevent of press jaw failure.

• USE WITH AN AIR IMPACT WRENCH TOMAKE THE JOB FASTER. The driver headnut and compressor screw incorporate ashear pin for safety.

STG-30369100VW/Audi Service Light Reset Tool• Extinguishes service lights for the

VW/Audi vehicle range, including the latest CAN vehicles

• Used with vehicles with “LongLife Oil/Standard Life Oil” service interval functionality

• This tool also extinguishes Airbagwarning light acrossthe complete VAGrange

• Updateable

WAY-SST42VSonic Sensor Test LightComputer and air bag safe! Identifies power, ground and openson 6, 12, 24 and 42 volt circuits. 42 Volt hybrid compatible! Quickly find broken wires, blown fuses, bad switches and more! • Super Bright LED Headlamp • Microprocessor controlled current loading capability for a TRUE

test of powers and grounds.• New - Dual Audible Tone and bicolor LED indicate power,

ground or open circuits.

SHF-FF31042 V Ready® Short & Open Circuit Finder SetAllows you to automatically traceshort and open circuits easily, quickly and reliably.

SHF-CT8002Professional CordlessComputer-Safe Circuit Tester No ground wire or clip required.For 3 and 28 Volts.

STG-UQ100Universal Radiator AdapterWorks on almost all foreign anddomestic car and light truckradiators and plastic reservoirs.

STG-OFRKIT3 Piece Combination OilRemoval Tool and Spill Boot• 3 sizes cover almost 90% of

car and light truck screw-on filter applications

• Oil leaks from the filter arecontained in the tool spill boot

• Covers: AC Delco, Castrol,Fram, NAPA, Pennzoil, Parts Plus, Penske, Purolator

$399.95

$154.95

$59.95

$89.95$429.95

$199.95

$829.95

$189.95

$119.95$31.95$279.95


ASM-FZ 29

ASM-FZ 32A

ASM-FZ 35A

ASM-FZ 36

ASM-FZ 41

ASM-FZ 128

ASM-FZ 138

ASM-BMW 345

ASM-BMW 350

ASM-M 0349

Radiator AdaptersASM-FZ 580Cooling System Adapter Kit for Deep and Shallow Radiator NecksApplications include: Acura, Chrysler, Dodge, Eagle,Ford models (Explorer, Festiva, Tempo, Villager, Wind-star, Sport Trac) Geo, Honda, Hyundai, Infiniti, Isuzu,Lexus, Mazda, Mitsubishi, Nissan, Subaru, Suzuki, andToyota.

ASM-21007 Piece Oil Filter Tool SetFor many domestic andforeign applications. The27, 32 and 36mm sizescover VW, BMW, Toyota,newer MB, Saturn, newerFord Turbo-Diesel trucksand the GM 2.2 literEcotec engine.

ASM-6500VW/Audi Axle Nut Socket Set• 14mm and 17mm Allens• 30 & 32mm-12 point sockets

ASM-TOY-300Toyota Oil Filter WrenchSet includes TOY 640, TOY 730 & MO209 oil filterwrenches. Covers every Toyota gas engine modelsbetween 1983 and 2006. Also covers new style oil filterhousing cap on 2005 Avalon& 2006 Lexus GS300.

ASM-T-40057Oil Filter Housing DrainFor draining the oil filter housing on 2005-2006 VW andAudi models with the new 2.0 T motor and the 2.5 in-line 5 cylinder VW engine. Prevents spillage and allows for 100% drainage of oil from the housing.

ASM-V-410Volvo Oil FilterWrench1999 to 2001Volvo cars.

ASM-ATF1002BASIC3 Liter Basic Drive Line Filler SystemUsed for filling fluids in transmission, differentials andtransfer cases (not suitable for use with fuels or solvents).• Includes ATF 102 adapter applicable to BMW, Honda,

Nissan and many other universal applications. Ideal for Honda SUV differential fill.

No. Description Price

ASM-201 6, 8, 10 and 12mm

ASM-202 1/4", 5/16", 3/8", 7/16" and 1/2"

ASM-203 1/4", 5/16", 3/8", 7/16", 1/2", 9/16" and 5/8"

ASM-81077 Piece Disconnect Tool Set1/4", 5/16", 3/8" & 1/2", also includes No. 8021 & No. 8022.

ASM-3359Injector Pump LockingPin for VW TDI Engines

ASM-T-10050Crankshaft StopInstalls and removes quickly and easily. Usedwith 3359 lock pin and H2587-1 pin wrench.Applicable to Golf/Jetta Pump Duse TDI 05,06.

ASM-H-2587-1Timing Belt SpannerWrench for VW & AudiUsed for the adjustment of the timing belt

ASM-80242006 Ford Explorer 1/2" Oil Cooler Line Remover

ASM-6500 X18Rear Axle Bolt Remover/Installer Socket1/2" drive, 18mm, 12 point. Applicable to 2006 VW Jettaand Golf.

ASM-8023Ford 1/2" Oil Cooler Line RemoverUsed to disconnect transmission oil cooler lines on 2005Ford F250, F350 and Excursion with 6.0 liter Turbo-Diesel.

ASM-SP1412BMW Spark Plug Socket• 14mm, 12 point socket with 3/8" drive• Applicable to 2007 and later BMW 335

and 535 with 3.0L twin-turbo motors• Slender in design to fit application

ASM-8021Ford/GM Oil Cooler Line RemoverWill clear the flare and disconnect the new style clips on:• 2003 & 2004 Ford Explorer (V8)• 2004 Ford F150 • 2003-2004 Cadillac CTS

Stud PullerRemover Kits

ASM-TOY1914Toyota SerpentineBelt WrenchEquipped with 14mm and19mm, 12 point securingattachments.

ASM-6800TDITiming Belt Tool Set For VW TDIUsed for locking the camshaft, crankshaft and diesel pump while setting the timing belt. Applicable to: 1999-2008 VW TDI andPumpe Duse engines.

Adapters for No. ATF1002BASICASM-ATF101 Ford 1/8" NPTASM-ATF103 VW Short AdapterASM-ATF104 VW Long AdapterASM-ATF108V Volvo 5/16 x 24ASM-ATFTOY118 Toyota 18 x 1.5ASM-ATF17CVT Audi CVT Trans. 24 x 1.5ASM-ATF16DSG VW/Audi DSG Trans. 24 x 1.5ASM-ATF129 Mercedes 722.9 Trans. 12 x 1.5

ASM-F-25005 Piece Oil FilterSocket Set for1988-2010 FordModelsIncludes 24, 36, 76, 93and 74mm oil filter sockets and wrenches.

ASM-OFTOY1038Threaded Oil FunnelFits: Toyota, Lexus, Scion & PontiacVibe models with a threaded oil cap(except Prius)

$32.95$44.95$44.95$44.95$63.95$47.95$47.95$48.95

$63.95

$63.95

$72.95

$61.95

$74.95

$17.95

$42.95

$63.95

$44.95

$63.95 $109.95

$115.95

$126.95

$119.95

$79.95

$69.95$91.95$132.95

ASM-203

$24.95 $71.95

$36.95

$52.95

$66.95

$31.95

$39.95

$29.95

$98.95

$24.95

$39.95

$219.95

$37.95

$359.95

$47.95


STR-CLT2PBCylinder Leakage TesterMeasures the ability of an engine cylinder to hold compressed air pressure and supplements a compression tester.• Larger, easier to read leakage

and pressure gauges• New indsutrial interchange quick

couplerIncludes:• New M14 short thread adapter on a 26" hose assembly• M14 long thread solid adapter

STR-TU1PBDeluxe Vacuum and Fuel Pump TesterFor all domestic and imported cars &trucks with gasoline engines. Large3-1⁄2" four colour easy to read gaugewith hook for versatility. Range ondials is 0 to 28"/0 to 70cm vacuumand 0 to 10 PSI/0 to 0.7 kg/cm2.

STR-TU470BFuel Injection Canister Cleaner• Two larger, easier-to-read gauges

enable technician to check fuelpressure and set cleaningpressure at the same time

• Cleans carbon from intake valves, fuel passages and cylinders

• 20 oz. capacity bottle sits flat for filling

STR-TU1553Super American DieselCompression Test Set• All GM, Isuzu, Lincoln Mark

VII Continental and FordNavistar;

• Audi, Mercedes, Peugeot, Toyota, VW, Volvo;

• No. 15-17 for Cummins usedon Dodge SUVs and trucks

• No. 15-22A for 7.3L Turbo Direct Injection for Navistar/Ford

STR-TU1570Heavy Duty Global Diesel Compression Test SetContains tester and all the most popular adapters needed to test heavy duty trucks and equipment.

STR-TU443-3Fuel Injection Update KitUpdates TU-443U Kit to TU-550,enabling fuel injection tests on all major domestic and foreign platforms1988 to present.

STR-TU3PBUniversal Compression TesterTests compression on all domesticand imported cars and light trucksand gasoline engines. Includes 14 and 18mm short, 14 and 18mm long flex, and 14mm long reach adapter.

STR-TU30ASuper Compression TesterTests compression on all domestic and imported cars and light trucks, gasolineengines and mini engines. Includes:• 24" hose assembly with quick coupler• New M12 x M16 adapter for Ford Triton

engines• New 8" M14 short thread solid adapter

for deeply recessed spark plug holes• M14 adapter short and long• M10 adapter with short thread• Small engine tester (No. TU-21) with

M14 x M18 threads and PSI/Bar gauge

STR-TU24APBThree Way Exhaust Back Pressure KitAllows quicker and more accurate testing of exhaust blockages in catalytic converters, mufflers, etc. Can test in: Oxygen Sensor, Exhaust Pipes, Air Injection System.

STR-TU550Master Global Fuel Injection Test Kit• Covers virtually all major

domestic and foreign platforms 1988 to present

• The redesigned 71317 fuel line tee can accommodate 3/8", 1/4" and 5/16" hose sizes

• Kit contains: 16mm O-ring adapter and bolts(Hyundai & Mitsubishi), 11mm O-ring adapter and bolts (Nissan and Infiniti), and M12 x 1.00 Honda pulse damper adapter (Accord,Civic, and S2000)

STA-12270Universal Cooling System and Pressure Cap Tester• Tests pressure

up to 30 lbs• Includes blow molded case

PBT-70888Complete CoolingSystem & Cap Test Kit• Universal bladder for

100% coverage fordomestic and import vehicles

• Cap adapter kit has 8 sizes to adapt to allradiator caps

$115.95

$39.95

$279.95

$229.95

$549.95

$116.95

$59.95

$154.95

$109.95

$559.95

STARPRODUCTS

$136.95

$209.95

SPG-STAR-DYNALINE-AUTOENGINUITY.qxp 8/13/10 4:03 PM Page 3


FREE! #GW-82106 -2 Piece Double-X™Pliers Set - with purchase of #GW-80550.

FREE! #GW-82106 -2 Piece Double-X™Pliers Set - with purchase of #GW-80300.

51 Piece 1/4" Drive SAE/Metric Standard & DeepSocket SetStandard SAE: 3/16" – 9/16"Deep SAE: 3/16" – 9/16"Standard metric: 4mm – 15mmDeep metric: 4mm – 15mm

49 Piece 1/2" Drive SAE/Metric Standard & DeepSocket SetStandard SAE: 7/16" – 1-1/8"Deep SAE: 1/2" – 15/16"Standard metric: 10 – 24mmDeep metric: 10mm – 19mm

GW-803006 Point

GW-807006 Point

GW-805506 Point

GW-8030112 Point

GW-8070112 Point

GW-8055112 Point

GW-8030213 Piece Metric 4mm – 15mm

GW-8031112 Piece Metric 5mm – 15mm

GW-8030613 PieceMetric4mm – 15mm



GW-8070213 PieceMetric12 – 24mm









1/4" Drive 6 Point Socket Sets

1/4" Drive 6 Point Flex Socket Sets

GW-8030310 Piece SAE3/16" – 9/16"

GW-803107 Piece SAE3/16" – 9/16"

GW-8030710 PieceSAE3/16" – 9/16"

GW-8030510 PieceSAE3/16" – 9/16"

GW-8055313 PieceSAE1/4" – 1"

GW-8070311 PieceSAE1/2" – 1-1/8"

GW-8071111 PieceSAE1/2" – 1-1/8"

GW-8056113 PieceSAE1/4" – 1"

GW-8055511 PieceSAE1/4" – 7/8"

GW-807058 PieceSAE1/2" – 15/16"

GW-807138 PieceSAE1/2" – 15/16"

GW-8056311 PieceSAE1/4" – 7/8"

GW-805647 PieceSAE3/8" – 3/4"

GW-8030910 PieceSAE3/16" – 9/16"


1/4" Drive 6 Point DEEPSocket Sets





3/8" Drive 6 Point DEEP Socket Sets




3/8" Drive 6 Point FLEX Socket Sets

1/4" Drive 12 Point DEEPSocket Sets

57 Piece 3/8" Drive SAE/Metric Standard & DeepSocket SetStandard SAE: 1/4" – 1"Deep SAE: 1/4" – 7/8"Standard metric: 6mm – 19mmDeep metric: 6mm – 19mm

1/4" Drive Sockets

3/8" Drive Sockets

1/2" Drive Sockets

3/4" Drive Sockets

GW-8087913 Piece 3/4" Drive 12 PointSAE Socket Set• 7/8" – 1-1/2"• Includes an 8" extension bar

and a quick-release ratchet

GW-8088027 Piece 3/4" Drive 12 Point SAE Socket Set• 7/8" – 2-3/8"Includes: • 5", 8" and 16" extension bars• 18" sliding T-handle and flex

handle• Quick-release ratchet

$146.95

$29.35 $21.95

$99.95 $57.95

$29.35 $21.95

$42.95 $33.95

$44.95 $41.95

$59.95 $52.45

$59.95 $52.45

$44.95 $41.95

$62.95 $48.95

$70.95 $59.95

$70.95

$279.95

$449.95

$59.95

$62.95 $54.95

$94.95 $67.95

$42.95 $33.95

$146.95

$259.95 $259.95

$172.95 $172.95


GW-8120510 Piece Universal Joint andAdapter Set• Universal joints: 1/4", 3/8" dr.• Impact universal joints:

1/4", 3/8", 1/2" drive• Adapters: 1/4" F x 3/8" M,

3/8" F x 1/4" M, 3/8" F x 1/2" M,1/2" F x 3/8" M, 1/2" F x 3/4" M.

GW-8072736 Piece Master Torx®

Socket Set –1/4", 3/8", 1/2" Drive• Internal Torx:

T-8 – T-30, T-40 – T-55, T-60• Tamper-proof Torx:

T-7 – T-30, T-40 – T-55• External Torx:

E-4 – E-8, E-10 – E-20

GW-8072313 Piece Torx® Bit Socket Set1/4", 3/8", 1/2" DriveT-8 – T-60

GW-8072513 Piece Torx® Tamper-ProofBit Socket Set –1/4", 3/8", 1/2" DriveT-7 – T-60

GW-8058313-Pc Female Torx® SocketSet – 1/4", 3/8", 1/2" DriveE-4 – E-24

GW-803226 Piece 1/4" Drive DEEPFemale Torx® Socket SetE-4 – E-10

GW-803204 Piece 1/4" Drive MetricTriple Square Bit Socket Set4mm – 8mm

GW-805724 Piece Metric Triple SquareBit Socket Set –3/8" & 1/2" Drive6mm – 12mm

1/2" Drive Hex Bit Socket SetsGW-807207-Pc Metric6mm – 19mm

GW-807217-Pc SAE5/16" – 3/4"

3/8" Drive Hex Bit Socket Sets

GW-8058012-Pc Metric2mm – 12mm

GW-8058112-Pc SAE1/16" – 3/8"

1/4" Drive Sockets

3/8" Drive Sockets

1/2" Drive Sockets

Universal Joint andAdapter Set

Hex & Torx®

Socket Sets

GW-8490248 Piece 1/4" Drive SAE/Metric Standard & DeepImpact Socket SetStandard and deep SAE: 3/16" – 9/16"Standard and deep metric:4mm – 15mm

1/4" Drive 6 Point Impact Socket Sets


1/2" Drive 6 Point DEEPImpact Socket Sets




1/4" Drive 6 Point UniversalImpact Socket Sets



GW-8490610 PieceSAE3/16" – 9/16"

GW-8493112 PieceSAE3/8" – 1-1/16"

GW-8494212 PieceSAE3/8" – 1-1/16"

GW-8493219 PieceSAE3/8" – 1-1/2"

GW-8493419 PieceSAE3/8" – 1-1/2"

GW-849108 PieceSAE5/16" – 3/4"

GW-8490810 PieceSAE3/16" – 9/16"

GW-849158 PieceSAE5/16" – 3/4"

GW-849046 PieceSAE1/4" – 9/16"

GW-849178 PieceSAE5/16" – 3/4"

GW-8493813 PieceSAE1/2" – 1-1/4"












GW-8491644 Piece 3/8" Drive SAE/Metric Standard & DeepImpact Socket SetStandard SAE: 5/16" – 3/4"Deep SAE: 5/16" – 3/4"Standard metric: 8mm – 19mmDeep metric: 8mm – 21mmExtension bars: 3", 6", 10"

$136.95

$36.95$41.95

$54.95$47.95

$119.95

$89.95$83.95

$204.95$259.95

$24.95$32.95

$47.95$54.95

$59.95$119.95

$106.95$179.95

$219.95$229.95

$142.95

$57.95

$57.95 $48.95

$49.95

$31.95

$19.95

$26.95

$69.95 $62.95

$119.95

$149.95

$46.95

$36.95$41.95

$106.95


FREE! #GW-9230 with purchase of #GW-9412 or #GW-9416.

FREE! #GW-9231 with purchase of #GW-9533.

FREE! #GW-9703with purchase of #GW-9701.

FREE! #GW-9231 with purchase of #GW-9308 or #GW-9312.

FREE! #GW-9601with purchase of#GW-9620.

FREE! #GW-9903with purchase of#GW-9901.

Item No. Description Content Price

GW-9412 12 Piece Set – Metric 8mm – 19mmGW-9413 4 Piece Set – Metric 21mm – 25mmGW-9416 16 Piece Set – Metric 8mm – 24mmGW-9308 8 Piece Set – SAE 5/16" – 3/4"GW-9309 4 Piece Set – SAE 13/16" – 1"GW-9312 13 Piece Set – SAE 1/4" – 1"


GW-9620 12 Piece Set – Metric 8mm – 19mmGW-9602R 16-Pc – Metric (Roll Pouch) 8mm – 25mmGW-9533 8 Piece Set – SAE 5/16" – 3/4"GW-9509R 13-Pc – SAE (Roll Pouch) 5/16" – 1"


GW-9520 10 Piece Set – Metric 10mm – 19mmGW-9507 7 Piece Set – SAE 3/8" – 3/4"




GW-85098 12 Piece Set – Metric 8mm – 19mmGW-85099 16 Piece Set – Metric 8mm – 24mmGW-85198 8 Piece Set – SAE 5/16" – 3/4"GW-85199 13 Piece Set – SAE 1/4" – 1"










GW-85299 5 Piece Set – Metric 10mm – 22mmGW-85399 4 Piece Set – SAE 3/8" – 7/8"Item No. Description Content Price

GW-9901 12 Piece Set – Metric 8mm – 19mmGW-9902 16 Piece Set – Metric 8mm – 25mmGW-9701 8 Piece Set – SAE 5/16" – 3/4"GW-9702 13 Piece Set – SAE 5/16" – 1"

Combination Ratcheting GearWrench® Sets

Reversible Combination Ratcheting GearWrench® Sets

Stubby Combination RatchetingGearWrench® Sets

Stubby Flex CombinationRatcheting GearWrench® Sets

XL Combination Ratcheting GearWrench® Sets

XL X-Beam® Reversible Ratcheting GearWrench® Sets

Double Box Ratcheting GearWrench® Sets

XL X-Beam® Flex Ratcheting GearWrench® Sets

Half Moon ReversibleDouble Box RatchetingGearWrench® Sets

S-Shape ReversibleDouble Box RatchetingGearWrench® Sets

Flex Combination Ratcheting GearWrench® Sets

GW-858965 Piece Metric XL X-Beam CombinationRatcheting Wrench Set10, 12, 13, 14, and 15mm.

$128.95$99.95

$219.95$85.95$99.95

$189.95

$159.95$279.95$103.95$233.95

$162.95$279.95$109.95$239.95

$122.95$84.95

$184.95$137.95

$189.95$145.95

$98.95$69.96

$199.95$154.95

$174.95$142.95

$174.95$143.95

$206.95$339.95$152.95$284.95

9230/9231

9231

9601

97039903

$37.95


FREE! #KD-145 –Hose Pinch-Off Pliers –with purchase of #GW-3680.

GW-368015 Piece SerpentineBelt Tool Kit withGearWrench®

Technology100% coverage of allvehicles.

Combination Ratcheting GearWrench®

Flex Combination Ratcheting GearWrench®

– SAE –

– SAE –

– Metric –

– Metric –

No. Opening Length Price

GW-9008 1/4" 4.921"

GW-9010 5/16" 5.508"

GW-9011 11/32" 5.882"

GW-9012 3/8" 6.256"

GW-9014 7/16" 6.508"

GW-9016 1/2" 7.008"

GW-9018 9/16" 7.504"

GW-9020 5/8" 8.201"

GW-9022 11/16" 8.878"

GW-9024 3/4" 9.764"

GW-9026 13/16" 11.476"

GW-9028 7/8" 11.476"

GW-9030 15/16" 13.116"

GW-9032 1" 13.116"

GW-9034 1-1/16" 14.142"

GW-9036 1-1/8" 15.846"

GW-9038 1-1/4" 16.764"

GW-9060 1-5/16" 18.110"

GW-9062 1-3/8" 18.110"

GW-9040 1-7/16" 19.685"

GW-9042 1-1/2" 19.685"

GW-9044 1-9/16" 22.638"

GW-9046 1-5/8" 22.638"

GW-9048 1-11/16" 24.213"

GW-9050 1-3/4" 24.213"

GW-9052 1-13/16" 25.394"

GW-9054 1-7/8" 25.394"

GW-9056 2" 25.787"


GW-9705 5/16" 5.512"

GW-9704 11/32" 5.866"

GW-9706 3/8" 6.22"

GW-9707 7/16" 6.496"

GW-9708 1/2" 7.008"

GW-9709 9/16" 7.48"

GW-9710 5/8" 8.189"

GW-9711 11/16" 8.858"

GW-9712 3/4" 9.764"

GW-9713 13/16" 11.457"

GW-9714 7/8" 11.457"

GW-9715 15/16" 13.11"

GW-9716 1" 13.11"


GW-9106 6mm 4.921"

GW-9107 7mm 5.236"

GW-9108 8mm 5.508"

GW-9109 9mm 5.882"

GW-9110 10mm 6.256"

GW-9111 11mm 6.508"

GW-9112 12mm 6.756"

GW-9113 13mm 7.008"

GW-9114 14mm 7.504"

GW-9115 15mm 7.854"

GW-9116 16mm 8.201"

GW-9117 17mm 8.878"

GW-9118 18mm 9.315"

GW-9119 19mm 9.764"

GW-9120 20mm 11.476"

GW-9121 21mm 11.476"

GW-9122 22mm 11.476"

GW-9124 24mm 13.116"

GW-9125 25mm 13.116"

GW-9127 27mm 14.142"

GW-9130 30mm 15.846"

GW-9132 32mm 16.764"

GW-9134 34mm 18.11"

GW-9136 36mm 19.685"

GW-9141 41mm 22.638"

GW-9146 46mm 25.394"

GW-9150 50mm 25,787"


GW-9908 8mm 5.512"

GW-9909 9mm 5.866"

GW-9910 10mm 6.22"

GW-9911 11mm 6.496"

GW-9912 12mm 6.732"

GW-9913 13mm 7.008"

GW-9914 14mm 7.48"

GW-9915 15mm 7.835"

GW-9916 16mm 8.189"

GW-9917 17mm 8.858"

GW-9918 18mm 9.291"

GW-9919 19mm 9.764"

GW-9921 21mm 11.457"

GW-9922 22mm 11.457"

GW-9924 24mm 13.11"

GW-9925 25mm 13.11"


GW-81902 15 Piece Set – Metric 8mm – 22mmGW-81916 22-Pc – Metric (Roll Pouch) 6mm – 32mmGW-81901 15 Piece Set – SAE 1/4" – 1"GW-81917 18-Pc – SAE (Roll Pouch) 1/4" – 1-1/4"


GW-9224 4 Piece Set – Female Torx® E-6 – E-24






GW-81909 10 Piece Set – Metric 10mm – 19mmGW-81908 11 Piece Set – SAE 3/8" – 1"

Long Pattern Combination GearWrench® Sets

E-Torx® (Female) Double Box Ratcheting GearWrench® Set

Flare Nut GearWrench® Sets

Flex Flare Nut GearWrench® Sets

Crowfoot GearWrench® Sets

Open Stock Wrenches

$80.95

$11.45$12.55$11.45$11.45$12.55$13.35$14.45$15.35$16.25$17.25$18.25$19.25$21.00$21.00$26.15$26.15$26.15$28.55$28.55$34.25$37.65$41.35$45.55$65.85$79.00

$113.85$136.65

$20.95$21.55$22.15$23.25$23.95$24.55$25.55$26.85$27.95$29.25$30.25$31.55$41.95$41.95$50.25$50.25

$11.45$11.45$11.45$12.45$13.35$15.35$16.25$18.25$19.25$21.15$26.15$26.15$28.50$28.50$34.25$34.25$41.35$45.55$45.55$65.95$65.95$79.25$79.25$94.95$94.95

$113.95$113.95$136.65

$22.15$23.15$23.35$25.55$25.60$26.85$27.95$29.15$30.35$41.95$41.95$50.25$50.25

$155.95$213.95$164.95$199.95

$79.95

$71.95$55.95

$102.95$85.95

$69.95$78.95


GW-821102 Piece 13" Long Double-X™Internal and External Snap Ring Pliers Set• Straight tips:

.038, .047 and .070• 90 degree tips: .038 and .047.

GW-8006010 Piece Combination andPozidriv® Screwdriver SetIncludes Pozidriv®, slotted andPhillips.

GW-8006620 Piece Master Screwdriver SetIncludes slotted, Phillips, and Torx.

GW-800525-Pc Phillips Screwdriver Set#0 x 2.5", #1 x 3", #2 x 4" #2 x 8", #3 x 6".

GW-800535-Pc Slotted Screwdriver Set1/8" x 3", 1/4" x 4", 1/4" x 6",5/16" x 6", 3/8" x 8".

GW-800547-Pc. Torx® Screwdriver SetT-10 – T-40

GW-800594 Piece Long Screwdriver Set• Slotted: 3/8" x 16",

3/16" x 10", 3/8" x 12"• Phillips: #2 x 16"

GW-800643 Piece 18" Long Torx®

Screwdriver SetT-15 – T-25

GW-800654 Piece Robertson Screwdriver Set#0 x 8.25", #1 x 8.75", #2 x 8.75", #3 x 10.12"

GW-893939 Piece GearDriver Set• Provides high torque capabi li-

ty and fine ratcheting arc• 7 interchangeable shafts to

drive a variety of fasteners

Item No. Description Length Price

GW-81207 3 Piece Set, 1/4", 3/8" & 1/2" drive 7", 9.5", 12"GW-81007 1/4" Drive ratchet 7"GW-81208 3/8" Drive ratchet 9.5"GW-81303 1/2" Drive ratchet 12"


GW-81204 2 Piece Set, 1/4" and 3/8" drive 8", 14"GW-81009 1/4" Drive flex ratchet 8"GW-81210 3/8" Drive flex ratchet 14"


GW-81011 1/4" Drive full polish ratchet 5"GW-81211 3/8" Drive full polish ratchet 8"GW-81304 1/2" Drive full polish ratchet 11"


GW-81306 1/2" Drive full polish flex ratchet 17"

Item No. Description Price

GW-82220 Extends up to 29"GW-82248 Extends up to 48"


GW-82210 10" long – smooth profileGW-82216 16" long – smooth profileGW-82224 24" long – grooved profileGW-82233 33" long – grooved profile


GW-81213 3/8" Drive offset flex ratchet 12"

Cushion Grip Teardrop Ratchets

Cushion Grip Flex Head Teardrop Ratchets

Full Polish Teardrop Ratchets

Full Polish Flex Head Teardrop Ratchet

Extending IndexPry Bars• Indexible over 180° • 14 locking positions

Indexable Pry Bars• Indexible over 180° • 14 locking positions

Cushion Grip Offset Flex Head Teardrop Ratchet

GW-82764Metric6mm – 12mm

GW-82765SAE3/16" – 1/2"

7 Piece Nut Driver Sets

$73.95

$34.95

$29.95

$46.95

$114.95

$38.95

$41.95

$57.95

$54.95 $54.95

$57.95

$136.95$31.95$56.95$61.95

$94.95$37.95$67.95

$22.95$40.95$43.95

$52.95

$89.95$167.95

$34.95$46.95$72.95$89.95

$71.95

$47.95


GW-85075Tire Pressure Monitoring Kit• Range 12 - 120 in/lbs• Kit includes valve stem tool

and two sockets

KD-29533/4" Ratchet Dr. Flex Head Microm. Torque Wrench• 41.25" long • 100-600 ft/lbs (153-830 Nm)• Blow molded case

Item No. Drive Description Price

GW-81002 1/4" 5 Piece Set: 2", 3", 6", 10", 14"GW-81004 1/4" 4 Piece Set: 2", 4", 6", 14" – WobbleGW-81200 3/8" 4 Piece Set: 1-1/2", 3", 6", 12"GW-81201 3/8" 4 Piece Set: 3", 6", 10", 12" – WobbleGW-81300 1/2" 3 Piece Set: 5", 10", 15"GW-81301 1/2" 3 Piece Set: 5", 10", 15" – Wobble


GW-85050 1/4" drive, 30 to 200 in/lbs 10" longGW-85051 3/8" drive, 25 to 250 in/lbs 13.8" longGW-85052 3/8" drive, 10 to 100 ft/lbs 17.8" longGW-85053 1/2" drive, 20 to 150 ft/lbs 21.2" longGW-85054 1/2" drive, 20 to 250 ft/lbs 23.5" long

Item No. Drive Ft/Lbs In/Lbs Nm Price

GW-85070 3/8" 10 - 100 120 - 1200 13.6 - 135.6GW-85071 1/2" 25 - 250 300 - 3000 33.9 - 339

Item No. Drive Ft/Lbs In/Lbs Nm Price

GW-85073 3/8" 10 - 100 120 - 1200 13.6 - 135.6GW-85074 1/2" 25 - 250 300 - 3000 33.9 - 339


GW-81307 15" long full polish flex handleGW-81308 24" long full polish flex handle

Extension Sets

MicrometerTorqueWrenches

ElectronicTorqueWrenches

Electronic Torque Wrenches with Flexible Head and ANGLE

1/2" Drive Flex Handles

FREE! #GW-82106 -2 Piece Double-X™Pliers Set - with purchase of #GW-85050, #GW-85051, or #GW-85052.

FREE! #GW-82821 - 4" MiniBastard File Set - with purchase of #GW-82820.

FREE! #GW-81301 ExtensionSet and #GW-80055 MiniScrewdriver Set - with purchase of #GW-85053, or #GW-85054.

GW-828216 Piece 4" Mini BastardFile SetIncludes: flat,half round,round, triangle,square andknife mini files.

GW-828204 Piece 8" Bastard File SetIncludes: flat, half round,round, and triangle files.

GW-8230627 Piece Punch & Chisel Set

GW-823095 Piece Pin Punch Set1/8" – 5/16"

GW-823074 Piece Long Taper Punch Set1/8" – 1/4"

GW-822885 Piece Ball Pein Hammer Set• Ball pein: 8, 16, 24 and 32 oz.• 12 oz. soft face hammer

GW-822553 Lb Drilling HammerFor heavy duty use with punches and chisels

Dead Blow HammersGW-82256 16 oz.

GW-82257 32 oz.

GW-82258 48 oz.

GW-822893 Lb Engineer’s Hammer

LNK-250055 Piece 1/4" Drive

LNK-380055 Piece 3/8" Drive

LOCKING U-Joint, Ratchet, and Extension SetsCertified faster and safer, all LINKtools instantly lock together - evenwith your existing tools. No more tooldisconnects and dropped sockets.

$29.95$25.95$23.95$38.95$39.95$42.95

$146.95$142.95$142.95$144.95$162.95

$299.95$335.95

$335.95$389.95

$32.45$40.95

$579.95

$41.95

$99.95

$35.95

$31.95

$20.95

$28.95

$42.95

$71.95

$177.95

81300

$33.95

$42.95

$219.95

$99.95

$119.95


GW-83090120 Piece Automotive Starter Set

GW-83096255 Piece Diesel Master Set

GW-8309245 Piece Diesel Starter Set

GW-83091238 Piece Automotive Master Set

GW-8309332 Piece Auto Body Starter Set

GW-8309433 Piece HVAC Starter Set

GW-83097283 Piece Auto Body Master Set

GW-8308093 Piece Aviation Starter Set

$759.00

$1795.00

$715.00

$1645.00

$330.00 $770.00

$2045.00

$715.00


SUN-30415 Piece Cushioned GripMulti-Purpose Plier Set• 10" Groove joint

water pump pliers• 7" Diagonal cutter• 8" Long nose, slip joint and

linesman pliers

SUN-300710 Piece Snap-Ring Plier Set• For use with both internal and

external snap-rings• Insulated vinyl grips

SUN-96044 Piece Fract. JumboCombination Wrench Set21⁄8", 21⁄4", 23⁄8" and 21⁄2".

SUN-97088 PieceFractional3/8" - 7/8".

SUN-9605M5 PieceMetric20 - 24mm.

SUN-9707Fractional1-5/16'' - 2''.

SUN-9714Fractional3/8'' - 1-1/4''.

SUN-9940Fractional5/16" - 3/4".

SUN-9935Fractional5/16" - 7/8".

SUN-993011 PieceFractional3/8" - 1".

SUN-9914Fractional3/8" - 1-1/4".

Combination Wrench Sets

7 Piece Jumbo Combination Wrench Sets

14 Piece Combination Wrench Sets

5 Piece S-StyleWrench Sets

5 Piece Half MoonWrench Sets

Stubby ComboWrench Sets

14 Piece 15° and 60° Angled Ends Wrench Sets

SUN-99166 Piece Fractional 1-3/8" - 2".

Jumbo Angle Head Wrench Sets

SUN-99266 PieceMetric20 - 25mm.


SUN-991514 PieceFractional3/8" - 1-1/4".

SUN-9917M12 PieceMetric8 - 19mm.

V-Groove Combination Wrench Sets


1/2" Drive Crowfoot Wrench Sets

3/8" DriveFlare-NutStyleCrowfootWrenchSets

SUN-97407 PieceMetric 34 - 46mm.

SUN-9710M10 PieceMetric 10 - 19mm.


SUN-9707MMetric 33 - 50mm.

SUN-9715Metric 6mm - 19mm.

SUN-9940MMetric 10 - 19mm.

SUN-9935MMetric 8mm - 22mm.


SUN-9914MMetric 6mm - 19mm.

SUN-97207 PieceFractional1" - 1-1/2".

SUN-97226 PieceFractional1-5/8" - 2-1/4".

SUN-98133 Piece Flexible MagneticPick-Up Tool Set• 1/4" bit driver• 1/4" socket driver• 2-in-1 magnetic pick-up tool

with claw feature

14 Piece 3/8" Drive Long Ball Hex and Hex Bit Socket Sets

SUN-9920SAE1/8" – 3/8"

SUN-9921Metric3mm – 10mm

SUN-914444 Piece 1/4" Drive 6 PointSAE and Metric Socket Set• SAE standard: 3/16" – 9/16"• SAE deep: 1/4" – 9/16"• Metric standard: 4 – 15mm• Metric deep: 6mm – 15mm• Ratchet• 3" and 6" extensions

SUN-914747 Piece 3/8" Drive 6 PointSAE and Metric Socket Set• SAE standard: 1/4" – 7/8"• SAE deep: 3/8" – 7/8"• Metric standard: 6 – 19mm• Metric deep: 10mm – 19mm• Ratchet• 3" and 6" extensions

SUN-914848 Piece 1/2" Drive 6 PointSAE and Metric Socket Set• SAE standard: 7/16" – 1-1/8"• SAE deep: 1/2" – 15/16"• Metric standard: 10 – 24mm• Metric deep: 10mm – 19mm• Ratchet• 3" and 6" extensions

$199.95

$32.95$62.95

$38.95 $65.95

$114.95

$79.95$44.95

$42.95 $65.95

$23.95 $32.95

$25.95 $51.95

$104.95 $104.95

$51.95

$119.95

$144.95

$255.95

$62.95 $62.95

$38.95

$27.95 $27.95

$26.95 $26.95

$32.95 $26.95

$59.95 $50.95

$39.95

$42.95

$74.95


SUN-982222 Piece Screwdriver Set• Slotted, Torx & Phillips

screwdrivers• Tack puller • Scratch awl

SUN-36004 Piece 11" Needle Nose Plier SetStraight, curved, 45° and 90°angled noses.

SUN-37043 Piece 11" LongDiagonal Cutting Pliers• Long reach diagonal

cutting plier• Slip joint hose

grippers: 3/8" to 3/4" and 3/4" to 1-1/4"

SUN-37033 Piece 11" LongHose Gripper Pliers5/16", 1/2" and 3/4".

SUN-37064 Piece 16" LongAngled Needle Nose Pliers90°, 45°, straight, and curved.

SUN-98044 Piece Pinch Bar SetHook & point design. 6", 12", 16" & 20".

SUN-97044 Piece Pry BarSet with Handles8", 12", 18" & 24".

SUN-981616"

SUN-981820"

Individual Impact Sockets, 6 Point, SAE

1-1/8" SUN-436 SUN-436D1-3/16" SUN-438 SUN-438D1-1/4" SUN-440 SUN-440D1-5/16" SUN-442 SUN-442D1-3/8" SUN-444 SUN-444D1-7/16" SUN-446 SUN-446D1-1/2" SUN-448 SUN-448D1-9/16" SUN-450 SUN-450D1-5/8" SUN-452 SUN-452D1-11/16" SUN-454 SUN-454D1-3/4" SUN-456 SUN-456D1-13/16" SUN-458 SUN-458D1-7/8" SUN-460 SUN-460D1-15/16" SUN-462 SUN-462D2" SUN-464 SUN-464D2-1/16" SUN-466 SUN-466D2-1/8" SUN-468 SUN-468D2-3/16" SUN-470 SUN-470D2-1/4" SUN-472 SUN-472D2-5/16" SUN-474 SUN-474D2-3/8" SUN-476 SUN-476D2-7/16" SUN-478 SUN-478D2-1/2" SUN-480 SUN-480D2-9/16" SUN-482 SUN-482D2-5/8" SUN-484 SUN-484D2-11/16" SUN-486 SUN-486D2-3/4" SUN-488 SUN-488D2-13/16" SUN-490 SUN-490D2-7/8" SUN-492 SUN-492D2-15/16" SUN-494 SUN-494D3" SUN-496 SUN-496D

1-1/2" SUN-548 SUN-548D1-9/16" SUN-550 SUN-550D1-5/8" SUN-552 SUN-552D1-11/16" SUN-554 SUN-554D1-3/4" SUN-556 SUN-556D1-13/16" SUN-558 SUN-558D1-7/8" SUN-560 SUN-560D1-15/16" SUN-562 SUN-562D2" SUN-564 SUN-564D2-1/16" SUN-566 SUN-566D2-1/8" SUN-568 SUN-568D2-3/16" SUN-570 SUN-570D2-1/4" SUN-572 SUN-572D2-5/16" SUN-574 SUN-574D2-3/8" SUN-576 SUN-576D2-7/16" SUN-578 SUN-578D2-1/2" SUN-580 SUN-580D2-9/16" SUN-582 SUN-582D2-5/8" SUN-584 SUN-584D2-11/16" SUN-586 SUN-586D2-3/4" SUN-588 SUN-588D2-13/16" SUN-590 SUN-590D2-7/8" SUN-592 SUN-592D2-15/16" SUN-594 SUN-594D3" SUN-596 SUN-596D3-1/8" SUN-5100 SUN-5100D3-1/4" SUN-5104 SUN-5104D3-3/8" SUN-5108 SUN-5108D3-1/2" SUN-5112 SUN-5112D3-5/8" SUN-5116 SUN-5116D3-3/4" SUN-5120 SUN-5120D3-7/8" SUN-5124 SUN-5124D4" SUN-5128 SUN-5128D4-1/8" SUN-5132 SUN-5132D4-1/4" SUN-5136 SUN-5136D4-1/2" SUN-5140 SUN-5140D

1" DRIVE Standard DeepSize Model # Price Model # Price

3/4" DRIVE STANDARD DEEPSize Model # Price Model # Price

SUN-98033 Piece Angle Blade Professional Pry Bar Set12", 17", and 25"

SUN-982020 Piece Insulated Screwdriver Set with Interchangeable Drivers• Tested at 10,000 Volts• Meets IEC 60900 and DIN

specifications • A must have if you work on

electrical or static sensitivedevices

SUN-9810Extendable Pry Bar• Extends from 35" - 52"• 20° offset head for leverage• Pointed chisel on handle

end for alignment• Push-button release

mechanism

Indexing Pry Bars• Adjusts and locks

into 5 positions• Comfort grip handle

$33.95

$30.95$27.95

$32.95

$38.95

$41.95

$23.95

$23.95

$45.95

$99.95

$14.95$14.95$15.95$17.95$17.95$18.95$19.95$18.95$21.95$23.95$24.95$26.95$27.95$28.95$30.95$35.95$40.95$42.95$44.95$45.95$52.95$53.95$54.95$57.95$59.95$61.95$66.95$67.95$69.95$79.95$89.95

$23.95$23.95$24.95$25.95$27.95$29.95$27.95$25.95$26.95$29.95$33.95$35.95$35.95$36.95$38.95$49.95$51.95$54.95$60.95$64.95$78.95$80.95$81.95$92.95$93.95$94.95$95.95$97.95$99.95

$109.95$115.95

$27.95$28.95$29.95$29.95$34.95$36.95$39.95$41.95$43.95$37.95$39.95$41.95$41.95$42.95$47.95$50.95$54.95$55.95$61.95$64.95$67.95$72.95$79.95$85.95$89.95$92.95$95.95$98.95

$102.95$199.95$209.95$229.95$235.95$239.95$269.95$279.95

$41.95$41.95$41.95$49.95$45.95$49.95$49.95$51.95$59.95$56.95$59.95$61.95$66.95$68.95$76.95$84.95$87.95$92.95$96.95$98.95$99.95

$119.95$124.95$129.95$135.95$149.95$142.95$144.95$159.95$239.95$296.95$314.95$324.95$344.95$349.95$355.95

$49.95

$79.95

36

$55.95

$49.95

$59.95

$44.95

$46.95

$36.95

$26.95

$56.95

$119.95

$71.95

$99.95

$81.95


3/8" Dr. Socket Sets

1/2" Dr. Socket Sets

SUN-368012 Piece 3/8'' Drive12 Point Fractional DEEP Impact Socket Set5/16" – 1".

SUN-368213 Piece 3/8'' Drive 12 Point Metric DEEPImpact Socket Set7mm – 19mm.

SUN- 267813 Piece 1/2'' Drive 12 PointFractional Impact Socket Set 7/16'' – 1-1/4''.

SUN- 267913 Piece 1/2'' Drive 12 PointMetric Impact Socket Set10mm – 24mm.

SUN-265013-Pc. 1/2" Drive FractionalImpact Socket Set 7/16'' – 1-1/4''.

SUN-269016 Piece - 6 Point1-5/16'' – 2-1/4''.

SUN-26416 Point

SUN-281919 Piece - 12 Point3/8'' – 1-1/2''.

1/2" DriveFractionalImpactSocketSets

SUN-264019 Piece - 6 Point3/8'' – 1-1/2''.

SUN-282012 Point

SUN-269212 Piece 23mm – 36mm.

26 Piece1/2" DriveMetricImpact SocketSets 10mm – 30mm, 32, 33, 34, 35, 36mm.

SUN-26456 Point

SUN-282612 Point

SUN-269116-Pc. 1/2"Drive FractionalDEEP Impact Socket Set 1-5/16" – 2-1/4".

19 Piece1/2" DriveFractionalDEEP ImpactSocket Sets 3/8" – 1-1/2".

SUN-269312-Pc. 1/2" Drive MetricDEEP Impact Socket Set 23mm – 36mm.

26 Piece 1/2" Drive MetricDEEP Impact Socket Sets

SUN-282712 Point10 – 36mm.

SUN-26466 Point10 – 36mm.

SUN-265214 Piece10mm – 27mm.

1/2" DriveMetricImpact Socket Sets

SUN-336012 Piece 3/8'' Drive Fractional Impact Socket Set5/16'' – 1''.

SUN-335813 Piece 3/8'' DriveMetric Impact Socket Set7mm – 19mm.

SUN-336112-Pc. 3/8'' Drive FractionalDEEP Impact Socket Set5/16" – 1".

SUN-335913 Piece 3/8''Drive MetricDEEP ImpactSocket Set7mm – 19mm.

SUN-3360DD28 Piece 3/8" Drive Metric and Fractional DEEP Impact Socket Set5/16" to 1", 8mm to 22mm,3" impact extension, and1/2" F x 3/8" M adapter.

SUN-265113 Piece1/2'' Drive Fractional DEEPImpact Socket Set7/16'' – 1-1/4''.

SUN-265314 Piece 1/2'' Drive Metric DEEP Impact Socket Set10mm - 27mm.

SUN-267015 Piece 1/2" Drive 12 Point Fractional Deep Socket Set3/8" – 1-1/4".

SUN-267215 Piece 1/2" Drive 12 PointMetric Deep Socket Set10mm – 24mm.

SUN-991313 Piece 3/8" Drive SAEWeatherhead Socket Set• For removal and installation of

weatherhead fittings, 90 degreeelbow joint applications,hydraulic hose and fittings

• 7/16" to 29/32"

SUN-36547 Piece 3/8" Drive Universal Fractional Impact Socket Set3/8" – 3/4"

SUN-26579 Piece 1/2" Drive Universal Fractional Impact Socket Set7/16" – 15/16"

SUN-26557 Piece 1/2" Drive UniversalMetric Impact Socket Set13mm – 19mm

SUN-365710 Piece 3/8" Drive UniversalMetric Impact Socket Set10mm – 19mm

$46.95

$71.95

$87.95

$149.95

$349.95

$89.95

$43.95

$98.95

$166.95

$166.95

$109.95

$124.95 $115.95

$499.95

$174.95

$199.95$204.95

$99.95

$129.95

$132.95

37

$56.95

$89.95

$109.95

$349.95

$299.95

$152.95

$209.95

$165.95


$439.95 $439.95

$729.95

$549.95

$174.95

$174.95

$579.95

$389.95

FREE! Sunex #4304, 3/4" Universal Joint


SUN-28384 Piece 1/2'' Drive 6 Point Deep Spindle Nut Impact Socket Set30, 32, 34 and 36mm.

SUN-265910 Piece 1/2'' Drive Fractional Deep UniversalImpact Socket Set3/8" – 15/16".

SUN-265810 Piece 1/2'' Drive MetricDeep Universal Impact Socket Set10mm – 19mm.

SUN-28397 Piece 1/2" Dr. 6 Point Deep Spindle Nut Socket Set for GM & Chrysler29, 30, 32, 34, 35, 36, & 38mm.

SUN-468211 Piece 3/4" Drive Fractional TruckService Impact SetFrom 3/4'' to 1-1/2'', and one13/16" square socket.

SUN-46818-Pc. 3/4" Dr.Fract. Deep Impact Socket Set 1'' – 1-1/2''.

SUN-468317 Piece 3/4" Drive Heavy Duty Fractional Impact Socket Set1" – 2".

SUN-468417 Piece 3/4" Drive Heavy Duty Metric Impact Socket Set26mm – 46mm.

SUN-46879 Piece 3/4" Drive12 Point THIN WALL 3/4" – 1-1/4".

1/2" Dr. Socket Sets 3/4" Dr. Socket Sets

1" Dr. Socket Sets

SUN-5153DD29 Piece 1/2" Drive Metric & Fractional Deep Impact Socket Set• 13 deep fractional:

7/16" to 1-1/4";• 14 deep metric:

10mm to 27mm;• 2 deep flip sockets:

3/4" x 13/16" and 19 x 21mm.

SUN-266839 Piece 1/2" Drive Fractional Regular & DeepImpact Socket SetFrom 3/8" to 1-1/2" with 1/2" U-joint.

SUN-266939-Pc. 1/2" Drive Metric Regular & Deep Impact Socket Set From 9mm to 30mm with 1/2" U-joint.

SUN-468517-Pc. 3/4"Drive Fract.DEEP ImpactSocket Set1" to 2"

SUN-468617 Piece 3/4"Drive MetricDEEP ImpactSocket Set26mm - 46mm

SUN-469529 Piece 3/4" Dr. FractionalDEEP Impact Socket Set3/4" – 2-1/2"

SUN-469629 Piece 3/4" Dr. FractionalImpact Socket Set3/4" – 2-1/2"

SUN-56066 Piece 1" DriveFractional HexDriver Impact Set3/4" – 1-3/8"

SUN-56076 Piece 1" Drive Metric HexDriver Impact Set14mm – 27mm

SUN-569321 Piece 1" Drive FractionalDEEP impact Socket Set3/4" – 2"

SUN-569221 Piece 1" Drive Fractionalimpact Socket Set3/4" – 2"


FREE! Sunex #5304, 1" Universal Joint

FREE! Sunex #5304, 1" Universal Joint



Drive Line/Limited ClearanceImpact Socket SetsContain sizes for working onFord, Chevrolet, Chrysler,Dodge, GMC and Jeep.

SUN-26959 Pc. 1/2" Dr. Metric12 Point Impact Socket Set, 8, 10, 11, 12, 13, 14, 15, 16and 17mm

SUN-26967 Pc. 1/2" Dr. SAE 12 PointImpact Socket Set5/16", 3/8", 7/16", 1/2", 9/16",11/16" and 3/4"

SUN-23433 PieceSuperReducerAdapter SetSet includes:• 1/2" drive - 1/2" Female x

3/8" Male adapter• 3/8" drive - 3/8" Female x

1/4" Male adapter• 3/4" drive - 3/4" Female x

1/2" Male adapter• Lifetime warranty

SUN-28374 Piece 1/2''Drive 12 PointDeep Spindle Nut Impact Socket Set• For use on most vehicles• 30, 32, 34 and 36mm.

$152.95

$77.95

$31.95

$154.95

$109.95

$162.95

$199.95 $121.95


$49.95

4506 / 45073647 / 3648

$77.95

$59.95

$27.95 $33.95

$57.95

$92.95

SUN-102062-7/8" Axle Nut Spanner SocketSix-lug, spanner-typewrench removes andinstalls rear wheel bearinglocknuts. 3/4" square driveopening with 2-7/8" O.D. Services1954 to current Chevrolet and GMC11,000 to 13,500 lbs axles.

SUN-102072-5/8" Axle NutSpanner SocketSix lug spanner-type socket removesand installs rear wheel bearing lock-nuts on 1946-present Chevrolet andGMC 5200 and 7200 lbs axles. O.D.of the socket is 2-5/8".

Super Adapters

Extensions

UniversalJoints

Model # Description Price

Super Adapters (Lifetime Warranty)SUN-3303 3/8" F x 1/4" MSUN-2303 1/2" F x 3/8" MSUN-4305 3/4" F x 1/2" MSUN-5305 1" F x 3/4" M

Impact ExtensionsSUN-4302 3/4" Dr. 6" LongSUN-4310 3/4" Dr. 10" LongSUN-4313 3/4" Dr. 13" Long

Universal Impact JointsSUN-3301 3/8" DriveSUN-2300 1/2" DriveSUN-4304 3/4" Drive

SUN-35004 Piece 3/8" Drive Impact Extension Set3", 5", 10", & 15" long.

No. Description Size Price

SUN-3647 7 Pc. 3/8" Dr. 3/16" to 1/2"

SUN-3648 7 Pc. 3/8" Dr. 4, 5, 6, 7, 8, 10 and 12mm

SUN-2638 10 Pc. 1/2" Dr. 1/4" to 3/4"

SUN-2639 10 Pc. 1/2" Dr. 6, 7, 8, 10, 12, 14, 15, 17, 18, 19mm

SUN-4506 5 Pc. 3/4" Dr. 3/4", 7/8", 1", 11⁄8", 11⁄4"

SUN-4507 5 Pc. 3/4" Dr. 14, 17, 19, 22 and 24mm

1/2" Drive Impact ExtensionsSUN-2524 24" LongSUN-2536 36" Long

SUN-2536T36" Long1/2" M x 3/8" F

SUN-25004 Piece 1/2" Drive Impact Extension Set3", 5", 10", & 15" long.

SUN-972638 Piece Mini Ratchet & Bit Set Includes: 4 Slotted, 6 Phillips,6 Pozidrive, 6 Hex, 14 Torx, (1) 72-teeth ratchet, (1) quick release extension.Bits not covered under warranty.

SUN-97198 Piece 3/8" Drive Triple Square Bit Socket Set 4mm to 16mm.

SUN-9911B13 Piece Female Torx Bit Socket Set E4 to E24, in 1/4", 3/8", & 1/2 drive.

Hex Driver Impact Socket Sets

Impact Extension Sets

Bit Socket Sets

ImpactAccessories

SUN-28409 Piece Hubcap and Wheel Lock Removal KitRemoves and replaces most hubcap locks on GM, Ford, Chrysler.

Pullers

Wheel/Brake ServiceHubcap & Wheel LockRemoval Kit

SUN-39132 Ton Capacity 4''Reversible 2/3 Jaw GearPuller• Can be assembled to

make a two or threejaw puller when addi-tional stability is needed

• Reversible jaw design for addedversatility and a broader range ofpulling capability

• Ideal for pulling gears, bearings,pulleys, and other press fit parts

SUN-39175 Ton Capacity 7'' Reversible2/3 Jaw Gear Puller

SUN-3916Pilot BearingPuller • Designed to pull fly-

wheel pilot bearingsin confined spaceswhere a slide hammer pullercannot be used

• Applicable for use on most modelswith engine in chassis

• Jaw apread: 1" to 1-1/2"• I.D. reach: 3/4"

SUN-39182/3 Jaw Reversible Slide Hammer Puller• Great for pulling gears,

bearings, outer races, greaseretainers, and oil seals

• Head length: 27"

SUN-3911Slide Hammer Puller Set5 lbs hammer and 8 functioninternal or external 3-jaw puller.

SUN-3930Master Brake Caliper Tool Set• Contains caliper adapters that

range from 1-3/16" to 2-1/2" aswell as adapters specificallydesigned to service Nissan, Saab,and Honda models

• Contains a caliper rotation toolwith left hand threads, especiallyuseful when working on 2004-2007 Ford Freestyle, 500, 2008Taurus, and Taurus X models

SUN-3935Pneumatic Brake Caliper Tool Set• Trigger controlled pressing speed• One hand operation• Magnetic adapter base for secure

attachment and quick change ofpress pads

• Gun accepts most every competitor’s press pads

• 16 application pads offer thewidest vehicle coverage availableworld-wide

SUN-3903MacPherson Strut Coil Spring Tool

$94.95

$44.95

$41.95

2638 / 2639

$69.95

$36.95

$42.95$54.95

$24.95$27.95$61.95

$35.95$41.95$51.95

$9.95$16.95$29.95$49.95

$59.95$59.95$76.95$76.95$84.95$84.95

$132.95

$62.95

$74.95

$239.95

$33.95


SK-391010-Pc. 3/8'' Dr. Metric Flex Socket Set10mm - 19mm.

SK-46077-Pc. 3/8'' Dr., Fract. Flex Socket Set3/8'' - 3/4''.

SK-1313 Piece 3/8'' Drive, 6 Point Metric ShortSocket Set7mm - 19mm.

SK-461313 Piece 3/8'' Dr., 6 Pt. Fract.Socket Set1/4'' - 1''.

3/8" Chrome Sockets

1/2" Chrome Sockets

SK-414277 Piece 1/2" DriveMetric Hex Bit Socket Set6 – 19mm

TORX Socket Set

SK-1976335 Piece 1/4", 3/8" & 1/2" Drive TORX Bit SocketSuper SetTORX: T8 to T60;Tamper-Proof TORX: T7 to T55;Female TORX: E4 to E18;

1/2" Impact Sockets

SK-403919 Piece 1/2" Drive, 6 PointFractional Impact Socket Set3/8" - 1-1/2".

SK-403823 Piece 1/2" Drive, 6 Point Metric Impact Socket Set10mm - 46mm.

SK-424721/2" Drive Professional Flex Head Ratchet17.6" long.

1/2" Drive Ratchet

SK-450810 Piece Fractional 3/8'' - 1''.

3/8" Drive Flare Nut Crowfoot Wrench Set

SK-451111 PieceMetric9mm - 19mm.

Crowfoot Wrench Sets

Specialty

SK-8782Dead Blow Hammer with Fiberglass Handle2 lbs. - 13.5" soft face.

Torque Wrenches• “Split beam” torque measuring

mechanism that requires only fingertip force to adjust

• Adjust from the bottom to the topof the scale in seconds

• No need to reset the tool to thebottom of the scale after use

• Blow molded case included• 1 year manufacturer

warranty

Model Drive Ft./Lbs Increments Length Price

PRC-C2FR100F 3/8" 20 - 100 2 ft./lbs 17-5/8"PRC-C3FR250F 1/2" 40 - 250 5 ft./lbs 22-1/8"PRC-C4D600F* 3/4" 200 - 600 10 ft./lbs 48"PRC-C5D600F* 1" 200 - 600 10 ft./lbs 48"

* These models come with a fixed head, not a flexible head.

4:1 Ratio Torque MultipliersCEN-6387• 3/4" drive input (500 ft. lbs)• 1" drive output (2000 ft. lbs.)

CEN-6380• 1/2" drive input (250 ft. lbs)• 3/4" drive output (1000 ft. lbs.)

Micrometer Flex Head Torque WrenchesIncludes a blow molded case.

Torque Wrenches

No. Drive English Metric Length Price

SK-74436 3/8" 15-75 ft.lb. 20.3-101.7 Nm 18.00"

Micrometer Adjustable “Clicker” Torque WrenchesIncludes a blow molded case.


SK-74530 3/8" 50-250 in.lb. 5.6-28.2 Nm 13.40"

SK-74531 3/8" 20-100 ft.lb. 27.1-135.6 Nm 18.00"

SK-74550 1/2" 30-150 ft.lb. 40.7-203.4 Nm 20.80"

Teardrop Ratchet Head Torque WrenchIncludes a blow molded case.


SK-74420 1/4" 40-200 in.lb. 4.5-22.6 Nm 10.3"

$212.95

$139.95

$79.95

$73.95

$117.95

$269.95

$226.95

$249.95

$89.95

$155.95$155.95

$58.95

$239.95

$145.95$147.95$149.95

$195.95

$679.95$449.95

$169.95$219.95$529.95$529.95

C2FR100FC3FR250F

C4D600FC5D600F


VIM-XZN1008 Piece XZN Triple Square Drive Set• For use on all german vehicles • Sizes: 4, 5, 6, 8, 10, 12, 14, 16mm• Lifetime warranty

VIM-SFP1010 Piece 1/4" Square Drive Stubby Flat and Philips Drive Set• 4 Philips bits: P1 to P4• 6 flat-tip drivers, 3.5mm - 12mm

VIM-HCT105010 Piece 1/4" Square Drive 1/2 Cut Torx Driver Set• T10 to T50, 3/4" overall length• 1/2 CUT: Torx length cut to 1/2 the normal

depth, increases strength and improvesfastener engagement

VIM-TTAP10T-Tap Installation Pliers• Hold 3M Scotchlok™ T-Tap

Disconnect Terminals in plier jaws forinstallation, crimps T-Taps shut

• Includes wire cutters• Crimps insulated and non-insulated wire

connectors and terminals

VIM-V23002 Piece Push PinRemoval Pliers Set• Designed to remove

plastic push pins onHonda, Toyota, GM, Saturn and many other vehicles

• Straight & 75 degreesoffset head pliers

VIM-Vi6008 Piece Fractional SetFrom 1/4" to 3/4"

VIM-VM6008 Piece Metric SetFrom 6mm to 19mm

3/8" Square Drive StubbyImpact Drivers for Hand and Power Impact Tools• 1-1/8" long (28mm)• Limited lifetime warranty

VIM-UJET1009-Pc Universal Joint Inverted E-Torx Set• E4, E5, E6, E7, E8, E10, E12, E14 and

E16 sizes, 1/4" and 3/8" square drives• Limited lifetime warranty

VIM-V458L-SET18 Piece Torx Long Blade Set• 1/4" or 3/8"

square drive• Includes 4.5" and

8" long Torx drivers, T10 to T50

• Limited lifetime warranty

VIM-V5PSD10 Piece 3/8" Drive 5 Point Security Driver Set• SD8 to SD50 security drivers,

with tamper proof pin recess• Limited lifetime warranty

VIM-TPXL089-Pc. 12" Extra Long Security Driver Set• T10 to T40

VIM-XZN4009 Piece 4" Long XZN Triple Square DriveSet For Use On All German Vehicles• Includes XZN 4M, 5M, 6M, 8M, 10M,

12M, 14M, 16M and 18M

• Chrome holderin 1/4", 3/8" or 1/2"

• Lifetime warranty

VIM-PL1001/4", 3/8" and 1/2"Power Lock LockingSquare Drive Set• 1/4" quick change shafts• Lifetime warranty

VIM-HBR4Smallest, Lowest Profile 1/4" DriveReversible Hex Bit Ratchet• The quick disk on the drive head allows

for quick tightening or loosening of fasteners when ratcheting is not required

• 52-tooth reversible gear head requires only 7° of sweep

VIM-FMC272-in-1 Flexible Magnetic Claw Pick-Up Tool• Picks up steel and non magnetic items,

up to 2 lbs.• 27" long flexible body• Lifetime warranty

VIM-HMS2626 Piece Master HexDrive Set• 13 piece metric:

2.5mm - 19mm• 13 piece SAE:

1/8" - 3/4"

VIM-TMS34PF34 Piece Torx Master Set • Torx: T8 - T60• Tamper resistant: T10 - T55• Torx sockets: E4 - E20

VIM-DT62005 Piece Upholstery Tool Set

VIM-V444Socket Tray with 4 Rails• 20 each of 1/4", 3/8" & 1/2" clips• 6" X 18" tray with handle

VIM-NS100SAE• 1/4" - 9/16"

VIM-NSM100Metric• 8mm - 14mm

12 Piece NutSetter Set with Magnetic andHollow PointDrivers• 2.5" long• Lifetime warranty

$104.95

$14.95

$35.95

$35.95

$43.95

$34.95

$34.95

$74.95

$49.95

$99.95

$58.95

$39.95

$62.95

$15.95

$109.95

$59.95

$23.95

$36.95$36.95

$36.95

$52.95


Oil Filter Pliers

Cutting Pliers

CHA-326 – 6" –

CHA-317 – 7" –

CHA-318 – 8" –

CHA-91191⁄2" Cable Cutter

CHA-338 – 8" –

CHA-436 – 6" –

Box Joint Cutting Pliers

Lap Joint Diagonal Cutting Pliers

CHA-44773⁄4" Lap Joint Curved Diagonal Cutting Plier

CHA-337 – 7" –

Long Nose Pliers with Side Cutter

6 in 1 Rescue Tool - Firefighters’ Pliers

CHA-5588" Hose Clamp Plier

Slip Joint Pliers

Tongue & Groove

Special Purpose Pliers

Nutbuster™ Pliers Brake Plier

CHA-41091⁄2" Nutbuster Plier, 4 Adjustments, 11⁄8" Capacity

CHA-41414" Nutbuster Plier, 6 Adjustments, 2" Capacity

CHA-21212" Oil Filter Plier, 5 Adjustments, 41⁄4" Capacity



CHA-8810.5" Lightweight Functional PlierCuts cables, cross-hatched teeth twistand pull; shuts off gas safety valves,tightens and loosens hose couplings,pries windows or doors open, shatterssafety glass using the steel punch.

CHA-90881⁄2" Wiring Tool

CHA-90993⁄4" Crimping & Cutting Plier

CHA-5488" Slip Joint with HeavyDuty Wire Cutting Shear

Plier Sets

CHA-GLS1Tongue & Groove Plier SetContains Nos.: GL10 & GL12.

CHA-PC14 Piece Plier Set Contains Nos.: 424, 426, 440 & 460.

CHA-44412" Air Brake Plier• For over the road trucks

and trailers with S-cambrake systems

• Provides a quick and easycheck of brake clearancesystems with automatic ormanual slack adjusters

• Offers 7 adjustments

CHA-5266" Slip Joint with Wire Cutting Shear

CHA-437 – 7" –

Item # Length Adjustments Capacity Price

CHA-424 4.5" 3 1/2"

CHA-420 9.5" 5 11⁄2"

CHA-430 10" 7 2"

CHA-440 12" 7 21⁄4"

CHA-442(Curved Jaw) 12" 7 21⁄4"

CHA-460 16" 8 41⁄4"

CHA-480 20" 12 51⁄2"

CHA-9278" Retaining Ring Plier• Capacity 1/4" to 2" external

3/8" to 2" internal• Includes tips: .036, .047, .070

straight. .036, .047 90°• Converts from internal to

external rings with a simpleswitch of the red tab

$26.95

$26.95

$34.95

$33.95

$24.95

$26.95

$22.95

$24.95

$28.95

$26.95

$22.95

$36.95

$29.95

$35.95

$21.95

$69.95

$23.95

$26.95

$21.95

$32.95 $95.95 $25.95

$13.95

436437

337338

326317 318

442

420430440460480

424

$18.95$19.95$20.95$21.95

$22.95$38.95$74.95

$34.95


VIS-20787064-Pc. Adjustable Wrench SetIncludes: 6", 8", 10" and 12". Comes in a tray.

VIS-20787085 Piece Tool Roll SetIncludes:6" slip joint, 6" diagonal cutters,8" linesman, 10" adjustable wrench, 10" groove joint.

VIS-20787074 Piece Plier Set6" diagonal cutters, 6" slip joint, 8" long nose and 10" groove joint.Comes in a tray.

VIS-71 (428GS)4 Piece Locking Plier Set10CR, 6LN, 7R, 5WR

VIS-1078TRAY10 Piece Locking Tool SetIncludes: 10R, 10WR, 7R,7WR, 7LW, 5WR, 6LN, 9LN,6R, and 11R.

VIS-74 (544T)5 Piece Clamping SetIncludes: One 10R, two 11R, two 6R, and a T-shirt

VIS-538KB (68)5 Piece Locking Plier Set5WR, 6LN, 7WR, 10R, 10CR

VIS-757KBT7 Piece Fast Release LockingPliers Set with Comfort GripsIncludes: 10R, 7R, 10WR, 7WR,5WR, 6LN, 9LN

VIS-6416 Piece Vise-Grip Setwith KooziesIncludes:• 5", 7" & 10" curved jaw

locking pliers• 4", 6" & 9" long nose

locking pliers• 6 Koozie cups

VIS-4WR 4"

VIS-5WR 5"

VIS-7WR 7"

VIS-10WR 10"

VIS-7CR 7"

VIS-10CR 10"

VIS-4LN 4"

VIS-6LN 6"

VIS-9LN 9"

VIS-8R 8"

VIS-20R 20"

VIS-9R 9"

VIS-6R 6"

VIS-11R 11"

VIS-18R 18"

VIS-24R 24"

VIS-6SP 6"

VIS-11SP 11"

VIS-18SP 18"

VIS-24SP 24"

VIS-12LC12" large jaw locking plier. Ideal for exhaust work, welding & plumbing. Jaw opens to 31⁄8".

Curved Jaw Locking Pliers with Cutter

Curved Jaw Locking Pliers

Straight Jaw Locking Pliers

Sheet Metal Plier

Locking Welding Clamp

Locking “C” Clamps

Large Jaw Locking Plier

Chain Wrench

Locking “C” Clamps withSwivel Pads

Long Nose Locking Pliers with Cutter

VIS-7R 7"

VIS-10R 10"

VIS-20767096 Piece Fast ReleaseLocking Pliers Set withComfort GripsIncludes: 10WR, 7WR,6LN, 5WR, 11R, 6R

$54.95

$57.95$42.95

$53.95

$119.95

$79.95

$64.95

$67.95

$119.95

$79.95

$10.95$11.95$12.95$13.95

$12.95$13.95

$14.95$13.95$16.95

$19.95

$23.95

$9.95$21.95$31.95$39.95

$14.95$23.95$33.95$41.95

$31.95

$21.95

$11.95$12.95


Part No. Size Price

VIS-274105 8"

VIS-274101 10"

VIS-274106 12"

VIS-274102 14"

VIS-274103 18"

VIS-274104 24"

VIS-274107 36"

VIS-274108 48"

Part No. Size Price

VIS-2074110 10"

VIS-2074112 12"

VIS-2074114 14"

VIS-2074118 18"

VIS-2074124 24"

VIS-2074136 36"

VIS-2074148 48"

IRON PIPE WRENCHES ALUMINUM PIPE WRENCHES

VIS-20781088" GrooveLockPlier

VIS-207811010" GrooveLock Plier

VIS-207811212" GrooveLock Plier

VIS-20782088" LinesmanPlier

VIS-20782099.5" LinesmanPlier

VIS-20782188" Long Nose Plier

VIS-20782266" Bent Long NosePlier

VIS-20782288" Bent Long Nose Plier

VIS-20783077" Diagonal Cutting Plier

VIS-20783088" Diagonal Cutting Plier

VIS-20783288" Cable Cutting Plier

VIS-20784088" Slip Joint Plier

VIS-207851010"

Groove Joint Pliers

VIS-207851212"

VIS-207851616"

Item # Description Cut Price

AMR-22010 10" Tinner Snip Straight

AMR-22012 12-3/4" Tinner Snip Straight

AMR-2073211 9" Offset Snip Left

AMR-2073212 9" Offset Snip Right

AMR-2073111 10" Aviation Snip Left

AMR-2073112 10" Aviation Snip Right

AMR-2073113 10" Aviation Snip Straight

AMR-2073115 “Bulldog” Heavy Duty Straight

AMR-23010 10" Tinner Snip Straight

AMR-23012 12-3/4" Tinner Snip Straight

IRONPipe Wrench Series

ALUMINUMPipe Wrench Series

$14.95

$17.95 $20.95

$18.95$19.95$24.95$25.95$31.95$45.95

$109.95$139.95

$31.95$43.95$45.95$56.95$87.95

$143.95$269.95

$13.95

$15.95

$13.95

$12.95

$14.95

$15.95

$13.95 $19.95

$13.95

$17.95

$7.25

$11.45

AMR-2073212 AMR-2073112

AMR-23010AMR-23012

$18.95$23.95$20.95$20.95$18.95$18.95$18.95$18.95$18.95$23.95

AMR-2073115

AMR-2073111

AMR-22010AMR-22012

By

AMR-2073211

AMR-2073113


RatchetingTap Wrenches

AMR-5322610 Piece1/8" to 13/32"

AMR-1111910-Pc. Left Hand Spiral Extractor & Drill Bit SetSpiral flute screw extractors sizes: EX-1, EX-2, EX-3, EX-4, EX-5. Drill bits sizes: 5/64", 7/64", 5/32", 1/4", 19/64"

AMR-901088-Pc. 1/2" Dr. Reduced ShankHSS Drill Bit Set Sizes 9/16" to 1".

Double Ended Drill Bits135° split point.AMR-60608 1/8"AMR-60609 9/64"AMR-60610 5/32"AMR-60612 3/16"AMR-60614 7/32"AMR-60616 1/4"

AMR-212013" LongFits #0 - 1/4", (3 - 6 mm).

AMR-212024" LongFits 1/4" to 1/2", (6 - 12mm).

AMR-3018006B29 Piece Reduced Shank TURBOMAX Drill Bit SetSizes 1/16" to 1/2".

AMR-3018002B29 Piece CobaltDrill Bit SetSizes 1/16" to 1/2".

AMR-301800329 Piece TitaniumDrill Bit SetSizes 1/16" to 1/2".

AMR-6013829 Piece H.S.S. Drill Bit SetSizes 1/16" to 1/2".

AMR-540099-Pc. 3/8" Drive SAE1/4" - 3/4"

AMR-540199-Pc. 3/8" Drive Metric8mm - 19mm

AMR-5411313-Pc. 3/8" Drive SAE1/4" - 3/4"

AMR-2639453-Pc. Metric Tap & Die Set From 3mm to 18mm.

AMR-2464053-Pc. Fract. Tap & Die SetFrom 6/32" to 3/4".

AMR-2637676 Piece Combination Master Tap & Die SetFractional: #4 to 1/2" Metric: 3mm to 12mm

AMR-9731125-Pc. Metric Master Tap & Die SetFrom 14mm to 24mm.

AMR-9709425-Pc. Fract. Master Tap & Die SetFrom 9/16" to 1".

AMR-5322725 Piece1/8" to 7/8"

AMR-541255-Pc. 1/2" Drive SAE3/4" - 1"

AMR-7314921-Pc. Straight ShankTURBOMAX Drill Bit SetSizes 1/16" to 3/8".

AMR-535355-Pc. Spiral

Flute Extractor SetSizes: 1, 2, 3, 4, 5.

AMR-2631741-Pc. Metric Tap & Die Set 3mm to 12mm.

AMR-2460641-Pc. Fract. Tap & Die SetNo. 4 through 1/2".

AMR-305205-Pc. Left-Hand MechanicsLength Cobalt Drill Bit SetPouched set includes: 5/64", 7/64", 5/32", 1/4", & 19/64".

Bolt Extractor Sets

HEX Head Screw Extractor Sets

AMR-26377117-Pc. Machine Screw/Fractional/Metric Tap & Hex Die and Drill Bit Deluxe Set• Machine screw: #4 to #12• Fractional: 1/4" to 1/2"• Metric: 3mm to 12mm• 28 drill bits: No. 3 to No. 43;

Letters: B, F, H, I, J, O, Q, R, S, U, Z; 5/64" to 29/64"

$27.95

$39.95

$189.95

1.49 Ch./Each

1.59 Ch./Each

1.69 Ch./Each

2.39 Ch./Each

3.15 Ch./Each

3.45 Ch./Each

$22.95

$25.95

$139.95

$169.95 $139.95

$84.95

$299.95

$309.95

$279.95

$229.95

$349.95

$349.95

$69.95

$59.95

$12.95

$134.95$139.95

$27.95

$94.95

$94.95

$129.95

$94.95


1050215502

10228PK

UNI-10228PK4 Piece Self Staring Drill Bit SetIncludes #1, #2, #3, and #1 Titanium

From theMakers of:

UNI-10502(UNI 502)3-Pc. SelfStarting DrillBit SetContains No. 1, No.2 & No. 3 drill bits.

UNI-155023 PieceTitanium-Coated Self Starting Drill Bit SetContains No. 1, No. 2 &No. 3 drill bits.

Self Starting Drill Bits

Hole Enlarging Drill Bits

Item # Hole Sizes Increments PriceUNI-10231 (UNI-1) 13 (1/8" to 1/2") 1/32"

UNI-10232 (UNI-2) 6 (3/16" to 1/2") 1/16"

UNI-10233 (UNI-3) 9 (1/4" to 3/4") 1/16"

UNI-10234 (UNI-4) 12 (3/16" to 7/8") 1/16"

UNI-10310 (UNI-10) 1 (1/2") —

UNI-10311 (UNI-11) 1 (7/8") —

UNI-10312 (UNI-12) 1 (3/8") —

UNI-10313 (UNI-13) 1 (1-1/8") —

Titanium-Nitrite CoatedUNI-15101 (UNI-1T) 13 (1/8" to1/2") 1/32"

Item # Hole Sizes Increments PriceUNI-10220 (UNI-20) 8 (9/16" to 1") 1/16"

UNI-10221 (UNI-21) 10 (13/16" to 1-3/8") 1/16"

ATD-27676 PieceFractional & Metric Tap & Die Set• Fractional: #4 - 1/2"; • Metric: 3mm - 12mm

ATD-277117 Piece Fractional & Metric Tap & Die Set with Drill Bits• Fractional: #4 - 1/2"; • Metric: 3mm - 12mm• 36 drill bits : #3 - #43;

5/64" - 29/64"; B, F, H, I, J, O, Q, R, S, U, Z

ATD-9115115 Piece Titanium Coated HSS Drill Bit Set• 3/8" and larger bits feature

reduced shank• 1/8" and larger bits feature

135° split point• (29) fractional: 1/16" – 1/2"; • (60) number sizes: #1 – #60• (26) letter sizes: #A – #Z

DAR-500XC3/32" to 1/2" Capacity Drill Bit Sharpener• Sharpens split point bits, 135°

bits, high-speed steel, masonry,carbide, and TiN-coated bits

• Creates split-point bits from standard bits

• Quick change diamond sharpening wheel

• Variable alignment lets youadjust chisel and reliefangles

DAR-750XC3/32" to 3/4" Capacity Drill Bit SharpenerDoes everything the 500XC does, PLUS:• Sharpens 3/32" - 3/4" bits

with one chuck• Custom point — choose any

angle from 115° to 140°

DAR-WS2000CWood Tool Sharpener• Air-cooled, dry sharpening system

uses double-sided 150mm Edge-Vision “see-through” wheels with multi-ple grit adhesive backed abrasives

• Offers 3 easy ways to grind and sharpen: Freehand, Chisel and planeiron port, Edge-Vision port

• Fast, precise and repeatable chisel sharpening port allows easy sharpeningof 25 degree angle chisels and planeirons up to 1-5/8" wide

DAR-350XC3/32" to 1/2" CapacityEconomy Drill BitSharpener• Sharpens High-speed Steel,

Carbide, TiN-coated andMasonry bits

• User-Replaceable diamond sharpening wheel accessory available

ATD-92041/8" Double-Ended TitaniumDrill Bit Set• 2" length• Pack of 12

Actual indexcase maydiffer frompicture.

Titanium Coated Drill Bit SetsATD-9215 5 piece left-handed, 5/64" - 19/64".

ATD-9229 29 piece, 1/16" - 1/2".

ATD-9231 31 piece popular size, (4) 3/32", (7) 1/8", (3) 5/32", (4) 3/16", (6) 1/4", (4) 5/16", (3) 3/8".

Cobalt Drill Bit SetATD-9261 29 piece, 1/16" - 1/4".

FREE! #DAR-MKM090 –1/4" Dr. Great NeckWrench – with purchase of #DAR-500XC or#DAR-750XC.

$79.95

$89.95 $129.95

$26.95$26.95$45.95$54.95$24.95$52.95$21.95$65.95

$34.95

$52.95$105.95

$153.95

$232.95

$119.95

10231

10232

10233

10234

10310

10311

10312

10313

15101

10220

10221

$199.95

$234.95

$199.95

$99.95

$4.95

9229

9215

$10.55$52.95

$42.95

$189.95


SBSeries

SCSeries

SDSeries

SFSeries

SFALUMACUT

SGSeries

SLSeries

MST-BT99-Pc. CarbideBurr SetIncludes all burrslisted in open stock.

PART # DESCRIPTION PRICE

MST-SB1DC 1/4 x 5/8 Cylindrical End Cut Carbide Burr

MST-SB5DC 1/2 x 1 Cylindrical End Cut Carbide Burr

MST-SC3DC 3/8 x 3/4 Cylindrical Radius End Carbide Burr

MST-SD1DC 1/4 Ball Carbide Burr

MST-SF3DC 3/8 Round Tree Carbide Burr

MST-SF5DC 1/2 x 1 Round Tree Carbide Burr

MST-SF5FM 1/2 Round Tree ALUMACUT Carbide Burr

MST-SG3DC 3/8 Pointed Tree Carbide Burr

MST-SL3DC 3/8 x 1-1/16 Long Taper Burr

Carbide Burrs — OPEN STOCK

SHA-062-10Fits AMMCO 4000.Pack of 10.

SHA-802-10 KWIK-WAY Bits.Pack of 10.

SHA-407-10FMC Bits.Pack of 10.

3" AbrasiveCutoff Wheels

SHA-26-103'' x 1/32'' x 3/8'' hole.(Pack of 10)

SHA-25-103'' x 1/16'' x 3/8'' hole.(Pack of 10)

ATD-81608 Piece 1/4" Carbide Burr Set

ATD-81704 Piece 1/4" x 6" LongDouble Cut Carbide Burr Set

NIC-22024N7 Piece General Purpose File Kit for Machine Shop• 10" Flat bastard file• 10" Flat smooth file• 10" Half-round bastard file• 10" Mill bastard file• 10" Round bastard file• 10" Square bastard file• 7" Slim Ttaper file

NIC-330244 Piece Thread Restoring File Set• Restores damaged thread on

worn external threads• Each file will works with

8 different thread sizes• Includes: regular bolt file,

extra fine/extra coarse bolt file,metric bolt file, #7 file

NIC-21474Plastic File Handle• Interchangeable cushion inserts

designed to fit most popular files• Non-slip, textured handle

NIC-214558" Long File Cleaner

Brake Lathe Bits

Lock-On and HoldHex Nut Driver• Locks onto Hex

screws• Great for hose

clamps

MMT-8002685/16" x 10" long

MMT-8003156mm x 10" long

MMT-8003177mm x 7" long

MMT-800357RP3 Piece Auto-Fit Self Adjusting Pliers Set• 7", 10", and 12" sizes in a durable nylon roll pouch• Truly "one-hand" operation. Just bump them open and

squeeze and Auto-Fit pliers automatically adjust to theoptimum gripping position.

• Include "piston-assist" gripping for maximum leverage.• Unique design enables them to easily fit into one hand

even when the jaws are in their fully open position.

$209.95

$17.95$40.95$23.95$17.95$26.95$34.95$45.95$26.95$31.75

$52.95

$63.75

$21.95

$11.65$11.65

$199.95

$149.95

$92.95

$69.95

$4.69$9.95

$69.95

$23.95 $19.95 $17.95

47

KER-1660

KER-1660ST

KER-1600

KER-1600BLK

KER-1600SS

KER-1600VIB

KER-1660VIB

KER-3000

KER-3000ARD

KER-1550

KER-1820

KER-1720

KER-1725

KER-1550ST

KER-1560

KER-1560ST


KER-3441256 PIECE ASSORTED PURE KOMACHI 2KITCHEN KNIVES SET3.5" to 7"

KEN ONION LEEK KNIFE• 440A stainless-steel blade with

55-57 Rockwell hardness rating• Removable pocket clip• Blade: 3", Closed: 4"

KER-1660Aluminum Leek Knife . . . . . . . . . . . .

KER-1660STAluminum Leek Knife – Serrated . . . .

KER-1660VIBRainbow Leek Knife . . . . . . . . . . .• Titanium-Oxide Coated Finish

KEN ONION CHIVE KNIFE• 2" 420HC stainless-steel blade• 410 stainless-steel handle (2-7/8" closed)

KER-1600Aluminum Chive Knife . . . . . . . . . . .

KER-1600BLKBlack Boron-Carbide Chive Knife . . . .

KER-1600SSPolished Chive Knife . . . . . . . . . . . .

KER-1600VIBRainbow Chive Knife . . . . . . . . . . . .• Titanium-Oxide Coated Finish

KEN ONION SCALLION KNIFE• Torsion bar mechanism for smooth & easy

assisted opening• 420HC stainless-steel blade• Polyamide handle• Safety tip lock, removable pocket clip• Blade: 2-1/4", Closed: 3-1/2"

LEEK KNIFE• Sandvik 13C26 stainless-steel• Ambidextrous assisted opening system• Includes a reversible/removable pocket

clip, frame lock and thumb stud• Handle: 410 stainless-steel tungsten DLC

coated

KER-1660CKTLeek Knife – Black . . . . . . . . . . . . . .• Blade: 3", Closed: 4"

KER-1620Scallion Knife – Black . . . . . . . . . . . .

KER-1620STScallion Knife – Black Serrated . . . . .

D.W.O CLASSIC KNIFE• Non-slip co-polymer handle• Quality AUS6A stainless-stell blade with

55-57 Rockwell hardness rating• Blade locks into position, releases easily• Blade: 2-3/8", Closed: 3-1/4"

NEEDS WORK KNIFE• Jack of all trades knife• Sandvik 13C26 stainless-steel blade• Polyamide handle• Speed-Safe design for quick and easy

one-handed deployment• Drop point blade, removable pocket clip• Blade: 3", Closed: 4-1/8"

KER-3000Classic Knife – Black . . . . . . . . . . . .

KER-3000RDClassic Knife – Red . . . . . . . . . . . . .

KEN ONION BLACKOUT KNIFE• 440A stainless-steel blade with

55-57 Rockwell hardness rating• Heat-treated 410 stainless-steel liner• Removable pocket clip• Blade: 3-1/4", Closed: 4-1/2"

KER-9900-77-PIECE KITCHEN CUTLERY SET IN WOOD BLOCK

JUNKYARD DOG & DOG II• Sandvik 13C26 stainless chromium blade• One-handed, index-finger opening

system, for left- and right-handed users• Locking liner secures the blade in place• Removable pocket clip

KER-1550Blackout Knife . . . . . . . . . . . . . . . . .

KER-1550STBlackout Knife – Serrated . . . . . . . . .

KER-1820Needs Work Knife . . . . . . . . . . . . . .

KER-1720Junkyard Dog Knife . . . . . . . . . . . . .• 410 stain.-steel handle with Airforce markings• Blade: 3", Closed: 4"

KER-1725Junkyard Dog II Knife . . . . . . . . . . . .• Handle: Textured grey G-10• Blade: 3-3/4", Closed: 4-7/8"

KEN ONION WHIRLWIND KNIFE• 440A stainless-steel blade with• Black polyamide handle• Speed-Safe torsion bar allow this knife to

be opened with one push• Blade: 3-1/4", Closed: 4-1/2"

KER-1560Whirlwind Knife . . . . . . . . . . . . . . . .

KER-1560STWhirlwind – Serrated . . . . . . . . . . . .

KER-1095SBTXSPORTSMAN’S BLADE TRADER• 3.5" hunting blade• 6" fillet blade & 6" saw blade

KER-1096FBTXFISHERMAN’S BLADE TRADER• 9" partially serrated blade• 7" fillet blade

KER-1098AKALASKAN BLADE TRADER• 6" Gut Hook blade• 3-1/2" Hunting blade• 6" Saw steel blade• Harness-leather sheath

$89.95

$254.95

$79.95

$55.95

$39.95

$73.95

$94.95

$65.95

$89.95

$89.95

$99.95

$99.95

$94.95

$62.95

$62.95

$33.95

$33.95

$94.95

$69.95

$89.95

$79.95

$79.95

$112.95

$63.95


Get the new 5" Cobra® Pliers(No. 8701125) FREE with thepurchase of a 3 Piece Set(No. 9K008067US).

OLF-L13/4" Blade Heavy Duty Utility Knife

OLF-L23/4" Blade Heavy Duty Utility Knife withRubber Insert No-Slip Grip

OLF-XA13/8" Ultramax® Ultra SharpBlade, Standard Duty Auto-Lock Cutter

OLF-LAX3/4" Ultramax® Ultra SharpBlade, Heavy Duty Auto-Lock Cutter

OLF-XH11" Blade, Extra Heavy Duty Ratchet Blade Lock Cutter

OLF-1803/8" Blade Multi Purpose Economy Utility Knife

OLF-SCS27" Small Utility ScissorsWith anti-slip serrated-edgestainless steel blades.

OLF-BSR2008" Arm Extra Heavy DutyScraper• Includes 4" dual-edge rigid

scraper blade (BS model).• Aslo fits BSF flexible blades

OLF-BSR30012" Arm Extra Heavy DutyScraper for Two-Handed Use• Includes 4" dual-edge rigid

scraper blade (BS model).• Aslo fits BSF flexible blades

KNI-74212008" 12° Angled High Leverage Diagonal Cutter• Cuts medium, hard & piano wire• Approx. 70mm space for gripping

KNI-850125010" Auto AdjustingPlier

KNI-71212008" 20° Angled Compact Bolt Cutter• For a nearly flush cut• Cuts soft, medium, hard and piano wire• Cut materials like bolts, nails, rivets, etc. up to 5.2mm or 0.2"

KNI-95112008" Double Jaw Cable Shear• Made to cut copper and aluminum cable only;

not meant to cut steel• Cuts up to 3/4" battery cable and AWG 2/0

KNI-875125010" Cobra ES Plier

KNI-749125010" High LeverageCenter CutterCuts soft, medium, hard & piano wire

KNI-74012008"

High Leverage Diagonal CutterCuts medium, hard and piano wire

KNI-740125010"

REFILL # FOR ITEM # PACK OF PRICE

OLF-ABB10B OLF-XA1 10

OLF-AB10B OLF-180 10

OLF-AB10S OLF-SVR2 10

OLF-BS-10B (Rigid) OLF-BSR200/BSR300 10

OLF-BSF-6B (Flexible) OLF-BSR200/BSR300 6

OLF-HB5B OLF-H1/OLF-XH1 5

OLF-LB10B/OLF-LB50B OLF-CMP2 10/50

OLF-LB10B/OLF-LB50B OLF-L1/OLF-L2 10/50

OLF-LB10B/OLF-LB50B OLF-LL 10/50

OLF-LB10B/OLF-LB50B OLF-XL2 10/50

OLF-LBB10B OLF-LAX 10

OLF-XL23/4" Blade Extra LongHeavy Duty Utility Knife

OLF-H11" Blade Extra Heavy Duty Sure Grip Utility Knife

OLF-SVR23/8" Blade Extra Thin Stainless Steel Utility Knife

KNI-9K008067US3 Piece Cobra® Pliers Set plus a FREE 5" Cobra Pliers• Includes 7", 10" and 12" long pliers,

plus a BONUS 5" pliers• Unique self-gripping jaw and

fast push-button adjustment$9.95

$11.45

$7.85

$11.95

$17.95

$3.85

$32.95

$38.95 $42.95

$22.95

$15.95

$9.95

$6.45$5.25$7.25$9.95$9.95$7.25$6.75/$25.95$6.75/$25.95$6.75/$25.95$6.75/$25.95$6.85

$46.95

$74.95

$71.95

$65.95

$149.95

$48.95

$44.95 $55.95

$65.95


Lifetime warranty on solid handles. One year limited warrantyon all moving parts against manufacturer's defects. Proof of purchase required.

IMP-293FISO Bubble Flaring Tool KitIncludes 4.75mm, 6mm, 8mm & 10mm adapters.

IMP-93FB45° Double Flaring ToolFor 3/16", 1/4", 5/16", 3/8", and 1/2" O.D. tubing.

IMP-TC1000Hi-Duty® Tube CutterFor 1/8" to 1-1⁄8" (4mm to 28mm) O.D. tub-ing. Unique design eliminates spiraling forclean right angle cuts.

IMP-TC1050Mini Tube CutterFor 1/8" to 5/8" (4mm to 15mm)O.D. tubing. 1-1/4" swing radius.

IMP-370FHTriple Head 180° Tube Bender withCalibrated MarkingsFor 3/16", 1/4", 3/8" and 1/2" tubing.

IMP-470FHTriple Head 180° Tube Bender with Roto-Lok™ Indexing HandleFor 3/16", 1/4", 5/16" and 3/8" tubing.

Mini RatchetingPipe CuttersCuts copper, aluminum, brass,stainless steel, plastic and PVC from 1/8" to 3/8".

Heavy Duty Ratcheting Pipe CuttersCuts copper, aluminum, brass, stainless, plastic and PVC from 5/16" to 1-1/8".

RC-3754"

RC-11257"

RC-375A4" Automatic

RC-1125A7" Automatic

Vertical Quick-Release Hose Puller for CarsRAT-QRPLVLarge3/8", 1/2", 5/8"

RAT-QRPSVSmall1/8", 1/4", 3/8"

Angled Quick-Release Hose Puller for TrucksRAT-QRPLALarge3/8", 1/2", 5/8"

RAT-QRPSASmall1/8", 1/4", 3/8"

RAT-QRP4SQuick-ReleaseHose Puller Setfor Cars andTrucksIncludes one each of Nos. QRPLV, QRPSV, QRPLA and QRPSA.

PBT-70717Small Flexible Line ClampsTwin pack. 1/8" - 5/16".

PBT-70730Medium Flexible Line Clamps Twin pack. 1/2" - 3/4".

CAL-302Self-Adjusting Spring ActionOil Filter Plier• Fits filters from 2-1/4" to 6"

153⁄4" ExtraLong Torx®

ScrewdriverSetsT10, T-15, T-20, T-25, T-27 & T-30.

CAL-912Regular Handles

CAL-917Tamperproof Handles

CAL-291Adjustable Spring LoadedOil Filter Plier• 3-3/4" to 7"

CAL-641Piston Ring Compressor Set• Installs piston rings

from 2-7/8" to 4-3/8"(73mm to 111mm)

CAL-946Inner Tie Rod Removal Tool

CAL-803Deluxe Strap Oil Filter Wrench• Adjusts quickly to any spin-on filter• 1/2" & 3/8" driver• Fits filters up to 9" (228mm)

CAL-731Flexible Hose Clamp Plier• Ratcheting pistol grip• Fits most hose clamps

$109.95

$84.95

$73.95

$63.95

$42.95

$21.95

IMP-470FH

IMP-TC1050

IMP-TC1000

IMP-370FH

$28.95 $49.95

$38.95 $52.95

$56.95 $56.95

$183.95

$56.95 $56.95

1125 1125A

375 375A

$12.95

$19.95

$41.95

$18.95

$39.95 $39.95

$44.95

$28.95

$63.95

$28.95


From the Makers of:

BOS-109999-Pc. Balldriver“L" Wrench Set1.5 – 10 mm.

BOS-1093612-Pc. Balldriver“L" Wrench Set0.05'' – 5/16''.

BOS-1093713-Pc. Balldriver“L" Wrench Set0.05'' – 3/8''.

BOS-125899 Piece Hex GorillaGrip®

Fold Up Set5/64" – 1/4"

BOS-125877 Piece HexGorillaGrip®

Fold Up Set2mm – 8mm

CAR-177308 Piece

CAR-177205 Piece

CAR-17650Hook/Pick/Magnet Set with

Quick-Coupler SystemIncludes 3" straight pick, 90° pick,

45° pick, circular pick, 3-lb magnet.

Telescopic MagnetsCAR-17810 71⁄2" – 32", 14 lbs capacity

CAR-17830 71⁄4" – 33", swivels 180°, rotates 360°, 14 lbs capacity

CAR-17845 71⁄2" – 32", Straight Head, 3 lbs capacity

Telescopic MIRRORSCAR-17750 73⁄4" – 351⁄2", Swivel Head, Shatter Proof

CAR-17755 61⁄2" – 271⁄2", Swivel Head, Shatter Proof

Telescoping Multi ToolKits with Brass Quick-Change Couplers

CAR-176909 Piece LightedInspection/Magnetic Pick-Up Kit

T-Handle Hex Tool SetsBOS-1339010 Piece3/32" to 3/8".

BOS-133898 Piece2 – 10mm.

DAR-RHS0019-Pc. SAE Ratcheting Hex Key Wrench• Folds to a compact 1" x 4" size • Easy grip handle • Reversible ratchet mechanism• 1/4", 7/32", 3/16", 5/32", 9/64",

1/8", 7/64", 3/32", 5/64"

HAZ-803LG-T/44 Piece 10" LongTorx Screwdriver Set• T15, T20, T25, T30 sizes• For applications in engine,

dashboard, doors, and body.

HAZ-900SZ-3030mm 12 Point Axle ShaftNut Impact SocketFor use on VW Golf, Jetta, Beatle2000 to present.

HAZ-900SZ-3636mm 12 Point Axle ShaftNut Impact SocketFor use on BMW.

HAZ-2579-9Polydrive Screwdriver SocketFor cylinder head screws on VW-Audi.

Tite-Reach™ Extension Wrench• 1 to 1 gear ratio• Gets into the tightest spaces where hand motion is

difficult, and turns nuts and bolts with ZERO degree of arc

• Use more than one Tite-Reach™ back to back to get into the most difficlt areas

• Drive the Tite-Reach™ from either side• Lifetime warranty

TTR-TR38V1Use 3/8" driver or socket(up to 150 ft/lbs)

TTR-TR14V1Use 1/4" driver or socket(up to 35 ft/lbs)

$18.95 $17.95 $21.95

$8.95 $9.45

$75.95$53.95

$19.95

MG01 MG02 MG03 MR01 MR02

$21.95

$26.95

$15.95

$17.95

$11.95

CAR-TK8000

$125.95

$59.95 $54.95

CAR-TK6000

$14.25

$59.95 $44.95

$105.95

$45.95

$34.95

$59.95

Quantités

limitéesLimitedQuantity

Documents

Heavy Duty Equipment - Groupe · PDF fileSet includes 8", 12", 18", and 24", 32", 36" bar shank lengths, in a gray molded tray. OTC-8245 45" Handled Pry Bar Pry Bars OTC-7687A