Heavy duty expansion joint systems - mageba | · PDF fileHeavy duty expansion joint systems for use by fork lift trucks and pallet trucks ... fixing on finished surfaces for refurbishment,

MIGUTrans

Heavy duty expansion joint systems

for use by fork lift trucks and pallet trucks hard wearing, maintenance-free, long lasting.

Shopping malls

Railway stations

Exhibition halls

Airports

Hospitals

2

MIGUTrans

MIGUA provide with MIGUTRANS a comprehensive program of heavy duty all-metal expansion joint systems for floors with heavy duty traffic load.

Modern architecture for shopping malls, railway stations, airports, exhibition halls and hospitals hast to fulfill multitude functions and load capacities.MIGUTRANS includes expansion joint systems for low duty by pedestrians, private cars, trucks up to heavy duty with highest point loads by pallet trucks and forklift trucks.Traffic loaded expansion joints are critical areas in the structure of buildings in particular.It may be necessary to consider other criteria, like even loadbearing surface for sensitive goods, fixing on finished surfaces for refurbishment, renovation and modernization, resistance to aggressive media, environmental influences, and watertightness.


Test certificatesOfficial test certificates about load capacities are available and can be forwarded on request InstallationApplication and installation instructions will be provided on request. Please contact us. As an alternative you can download it from our website www.migua.comFor installation of the MIGUTRANS profiles in asphalt, please ask for our technical advice.

Important notesWhen installing small installation heights, we recommend the use of epoxy mortar for the filling of the block out, due to the thin coverage above the profile.

In wet areas (canteen kitchens, sanitary rooms etc.), we recommend the use of stainless steel profiles or our watertight MIGUTAN profiles.

Special propertiesProduction lengths can be connected by staggering the joint in the individual aluminium profiles or by using connection pins.

Profiles are set to the mid-point by means of spacer in our works, this guarantees easy installation and correct function of the profile.The profiles can be pre-adjusted on request, to achieve single sided enlargement on the movement capacity.

MIGUTRANS allows designer and architects the possibility to include hard wearing, maintenance-free, long lasting expansion joint systems in their exclusive design:A user-oriented, high sophisticated and well-experienced program of solutions for expansion joints, which meet all functional and esthetic demands of innovative architecture.

Information about load capacity

Symbol

Meaning pedestrians private cars lorries fork lift trucks solid plastic

DIN 1072 DIN 1055 tyres

Load capacities for fork lift trucks are based on pneumatic or rubber tyres with a contact surface of 200 x 200 mm.

3

MIGUTrans Heavy duty expansion joint systems

Index to range of applications / alphabetic 4 - 5

Heavy duty all-metal expansion joint systems

Medium duty profiles – FS 6 - 8

Heavy duty profiles – FS/FSV 9 - 18

– for large joint widths 19 - 21 and large movement capacities

– small installation heights 22 - 23

– Stainless steel and brass surface 24 for highest demands

Profiles for surface fixing – FSN 25 - 29

Profiles for passage free from vibration – FS/FSS 30 - 31

Solid stainless steel / Heavy duty systems

Heavy duty profiles for highest load capacity – STS 32 - 35

Watertight heavy duty profiles for highest load capacity – STW 36

Technical Information

Corner Versions

E4 38 - 41

E3 42 - 43

Dimensions 44

Examples for application

Combined expansion joint systems 45

Small installation heights for blockouts 46

Large installation heights Extremely wide expansion joints 47

In combination with MIGUFOL-vapour barrier 48

Connections to Walls/Columns 49

Connections of single length / Intersections 50 - 51

Illustrations of applications 52 - 53

MIGUA – At a glance 54

Content

4

MIGUTrans


Range of applications


FSN Heavy duty profiles Surface fixing

MIGUA FSN series has mounting brackets for fixing on finished floors for surface fixing (flush connection) – particularly for refurbishment and renovation.The highly sophisticated articulated telescoping system absorbs movement in three directions and ensures maximum functionality, even under difficult conditions. Striated surface and a gap-free visible surface ensure traffic safety.

FS/FSSProfiles for vibration-free transportation

This interlocking system is especially suitable for reducing vibration to a minimum when transporting highly sensitive valuable goods. The solid All-aluminium expansion joint systems FS/FSS meets this demand, particularly maintenance-free, hard wearing and long lasting. Suitable for high load capacities, e.g. lorries, fork lift trucks, with movement in 3 directions (FS 100) or movement in 2 directions (FSS). They are ideal for production and storage facilities.

FSMedium duty profiles

In many applications the planned load capacity is in the normal range, e.g. private cars.MIGUA provide three proven product lines, made of solid aluminium with a highly sophisticated articulated telescoping system (hard wearing, maintenance free, long lasting).

FS/FSVHeavy duty profiles

Especially in construction projects of public and industrial sector heavy duty loads have to be considered. MIGUA offers especially for this sector a wide range of products, based on different criteria.The decisive criterion – distinct motivity, hard wearing, durability under load are considered in our specially designed and individually adapted articulated telescoping system.

Series Page

FS 50 6FS 99 7FS 146 8

Series Page

FS 40 / FS 46 9FS 75 10FS 110 11FS 130 12FS 160 13FS 185 14FS 105 15FS 135 / FS 174 16FS 155 17

FSV 235 18FSV 280 19FSV 285 20FSV 335 21

FS 220 / FS 260 / FS 380 22FS 255 / FS 295 / FS 410 23

FS 110 ES 24

Series Page

FSN 50 25FSN 99 26FSN 146 27FSN 28 - 29

Series Page

FS 100 30

FSS 215 31

5

MIGUTrans Heavy duty all-metal expansion joint systems

Index in alphabetic order

Series Page

FS 40 / FS 46 9FS 50 6FS 75 10FS 99 7FS 100 30FS 105 15FS 110 11FS 110 ES 24FS 130 12FS 135 / FS 174 16FS 146 8FS 155 17FS 160 13FS 185 14FS 220 / FS 260 / FS 380 22FS 255 / FS 295 / FS 410 23

FSN 28 - 29FSN 50 25FSN 99 26FSN 146 27

FSS 215 31

FSV 235 18FSV 280 19FSV 285 20FSV 335 21

STW 100 35STW 160 36

STS 100 32STS 160 33STS 160/16 / STS 160/22 34

Solid Steel / Stainless Steel heavy duty systems

STS Heavy duty profile for highest load capacity

MIGUA offers with series STS a program of Aluminium / Steel / Stainless Steel for high loads of pallet trucks, fork lift trucks, heavy lorries or special vehicles.Main criteria is the vibration free passage to avoid any damage on either building structure or vehicles.

The solid design ensures a reliable horizontal movement (transversal and parallel).

STW Watertight – Heavy duty profile for highest load capacity

STW has the same advantages as STS series, but with an additional sealing layer – watertight. The sealing layer ensures in combination with a suitable connection joint a 100% water-tight expansion joint system.The vibration free passage and a reliable horizontal movement (transversal and parallel) are also ensured: long lasting, maintenance-free. The system is removable and reversible at any time without destroying the connecting area.

Series Page

STS 100 32STS 160 33STS 160/16 / STS 160/22 34

Series Page

STW 100 35STW 160 36

6

MIGUTrans

bt

bs

b f max

h

FS 50

Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 50/20 30 10 (± 5) 53 140 20 90 35 3FS 50/35 30 10 (± 5) 53 140 35 90 35 3FS 50/50 30 10 (± 5) 53 140 50 90 35 3

Medium duty profile

Solid all metal-profilehard wearing, maintenance-free, long lasting

Striated surfaceensures good skid resistance

Visible surface has no gapsavoids dirt accumulation

Articulated telescoping systemabsorbs movement in 3 directions

MultiHole mounting bracketfor secure fixing

Larger installation heights on request.

Colour: AluminiumProduction length: 4 m


7

MIGUTrans

bt

bs

b f max

h

Medium duty profile

FS 99

Profile Joint width Total Visible width Total width Installation Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] FS 99/20 70 40 (± 20) 99 186 20 12FS 99/35 70 40 (± 20) 99 186 35 12FS 99/50 70 40 (± 20) 99 186 50 12



Striated surfaceensures good skid resistance Symmetrical visible surface shows no gapsavoids dirt accumulation

Articulated telescoping systemabsorbs movement in 3 directions Solid all metal-profilehard wearing, maintenance-free, long lasting



8

MIGUTrans

bt

bs

b f max

h

Medium duty profile

FS 146

Profile Joint width Total Visible width Total width Installation Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] FS 146/22 114 50 (± 25) 146 262 22 12FS 146/30 114 50 (± 25) 146 262 30 12FS 146/42 114 50 (± 25) 146 266 42 12FS 146/52 114 50 (± 25) 146 266 52 12FS 146/62 114 50 (± 25) 146 266 62 12FS 146/77 114 50 (± 25) 146 266 77 12FS 146/87 114 50 (± 25) 146 266 87 12FS 146/97 114 50 (± 25) 146 266 97 12



Symmetrical visible surface has no gapsavoids dirt accumulation






9

MIGUTrans

bt

bs

b f max

h

FS 40 / FS 46

Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 40/19 35 16 (± 8) 40 173 19 300 70 6,5FS 40/35 35 16 (± 8) 40 163 35 300 70 6,5FS 40/60 35 16 (± 8) 40 163 60 300 70 6,5 FS 46/50 35 20 (±10) 46 165 50 300 70 6,5

Heavy duty profile

Symmetrical visible surface







10

MIGUTrans

bt

bs

b f max

h

FS 75

Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 75/22 50 20 (± 10) 77 193 22 300 100 9FS 75/30 50 20 (± 10) 77 193 30 300 100 9FS 75/42 50 20 (± 10) 77 197 42 300 100 9FS 75/52 50 20 (± 10) 77 197 52 300 100 9FS 75/62 50 20 (± 10) 77 197 62 300 100 9FS 75/77 50 20 (± 10) 77 197 77 300 70 9FS 75/87 50 20 (± 10) 77 197 87 300 70 9FS 75/97 50 20 (± 10) 77 197 97 300 70 9

Heavy duty profile

Official test certificate on load capacity available Visible surface has no gapsavoids dirt accumulation








11

MIGUTrans

bt

bs

b f max

h

FS 110

Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 110/30 75 30 (± 15) 110 226 30 300 70 6,5FS 110/42 75 30 (± 15) 110 230 42 300 70 6,5FS 110/52 75 30 (± 15) 110 230 52 300 70 6,5FS 110/62 75 30 (± 15) 110 230 62 300 70 6,5FS 110/77 75 30 (± 15) 110 230 77 300 70 6,5FS 110/87 75 30 (± 15) 110 230 87 300 70 6,5FS 110/97 75 30 (± 15) 110 230 97 300 70 6,5

Heavy duty profile









12

MIGUTrans

bt

bs

b f max

h

FS 130

Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 130/42 100 40 (± 20) 134 254 42 300 70 6,5FS 130/52 100 40 (± 20) 134 254 52 300 70 6,5FS 130/62 100 40 (± 20) 134 254 62 300 70 6,5FS 130/77 100 40 (± 20) 134 254 77 300 70 6,5FS 130/87 100 40 (± 20) 134 254 87 300 70 6,5FS 130/97 100 40 (± 20) 134 254 97 300 70 6,5

Heavy duty profile









13

MIGUTrans

bt

bs

b f max

h

FS 160

Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 160/42 130 60 (± 30) 162 284 42 300 70 6,5FS 160/52 130 60 (± 30) 162 284 52 300 70 6,5FS 160/62 130 60 (± 30) 162 284 62 300 70 6,5FS 160/77 130 60 (± 30) 162 284 77 300 70 6,5FS 160/87 130 60 (± 30) 162 284 87 300 70 6,5FS 160/97 130 60 (± 30) 162 284 97 300 70 6,5

Heavy duty profile



Striated surfaceensures good skid resistance Articulated telescoping systemabsorbs movement in 3 directions



Colour: Aluminium Production length: 4 m


14

MIGUTrans

bt

bs

b f max

h

bt

bs

b f max

h

FS 185

Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 185/27 140 60 (± 30) 185 305 27 300 70 6,5FS 185/40 140 60 (± 30) 185 305 40 300 70 6,5FS 185/80 140 60 (± 30) 185 305 80 300 70 6,5

Heavy duty profile

Visible surface has no gapsavoids dirt accumulation Striated surface ensures good skid resistance

Extremely flat (27 mm)ideal for redevelopment, refurbishment, renovation






15

MIGUTrans

bt

bs

b f max

h

FS 105

Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 105/30 75 20 (± 10) 105 221 30 600 130 15 FS 105/42 75 20 (± 10) 107 223 42 600 130 15 FS 105/52 75 20 (± 10) 107 223 52 600 130 15 FS 105/62 75 20 (± 10) 107 223 62 600 130 15





Heavy duty profile




16

MIGUTrans

bt

bs

b f max

h

bf max

h

bs

bt


FS 135 / FS 174

Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 135/25 35 20 (± 10) 135 206 25 600 250 30 Also available as FS 174/25 for joint width up to 70 mm: FS 174/25 70 20 (± 10) 174 245 25 600 130 15

Heavy duty profile

Symmetrical visible surface has no gapsavoids dirt accumulation Striated surfaceensures good skid resistance Solid all metal-profilehard wearing, maintenance-free, long lasting

Extremely flat 25 mm



17

MIGUTrans

bt

bs

b f max

h


FS 155

Heavy duty profile

Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 155/30 120 40 (± 20) 155 271 30 600 130 15FS 155/42 120 40 (± 20) 157 273 42 600 130 15FS 155/52 120 40 (± 20) 157 273 52 600 130 15FS 155/62 120 40 (± 20) 157 273 62 600 130 15








18

MIGUTrans

bt

bs

b f max

h

bf max

bt

bs

h

Heavy duty profile

FSV 235

Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FSV 235/45 150 60 (± 30) 235 357 45 300 70 6,5FSV 235/80 150 60 (± 30) 235 357 80 300 70 6,5FSV 235/90* 150 60 (± 30) 235 357 90 300 70 6,5FSV 235/130* 150 60 (± 30) 235 357 130 300 70 6,5FSV 235/140* 150 60 (± 30) 235 357 140 300 70 6,5

Visible surface has no gapsavoids dirt accumulation Removable bridging unitserviceable for inspection, replaceable centre parts




* Available on request.



19

MIGUTrans

bt

bs

b f max

h

bf max

bt

bs

h

Heavy duty profile in connection with large joint width and large movements

FSV 280

Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FSV 280/45 200 85 (± 42,5) 280 403 45 35 35 6,5FSV 280/80 200 85 (± 42,5) 280 403 80 35 35 6,5FSV 280/90* 200 85 (± 42,5) 280 403 90 35 35 6,5FSV 280/130* 200 85 (± 42,5) 280 403 130 35 35 6,5FSV 280/140* 200 85 (± 42,5) 280 403 140 35 35 6,5

Removable bridging unitserviceable for inspection, replaceable centre parts Visible surface has no gapsavoids dirt accumulation Striated surface ensures good skid resistance






20

MIGUTrans

h

b f max

b t

b s

bf max

bt

bs

h

FSV 285

Profile Joint width Total Visible width Total width Installation Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] FSV 285/27 240 100 (± 50) 284 404 27 Private carsFSV 285/40 240 100 (± 50) 284 404 40 Private carsFSV 285/80 240 100 (± 50) 284 404 80 Private cars


Symmetrical visible surface has no gapsavoids dirt accumulation Extremely flat (27 mm)ideal for redevelopment







21

MIGUTrans

bt

bs

b f max

h

bf max

bt

bs

h

FSV 335

Profile Joint width Total Visible width Total width Installation Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] FSV 335/ 45 250 100 (± 50) 335 457 45 Private carsFSV 335/ 80 250 100 (± 50) 335 457 80 Private carsFSV 335/ 90* 250 100 (± 50) 335 457 90 Private carsFSV 335/130* 250 100 (± 50) 335 457 130 Private carsFSV 335/140* 250 100 (± 50) 335 457 140 Private cars

Striated surface ensures good skid resistance

Symmetrical visible has no gapsavoids dirt accumulation Removable bridging unitserviceable for inspection, replaceable centre parts







22

MIGUTrans

bt bs/

b f max

h

bf max

bt / bs

h

Heavy duty profile small installation height

FS 220 / FS 260 / FS 380

Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 220/20 60 40 (± 20) 220 220 21 600 130 15FS 260/20 100 40 (± 20) 260 260 21 600 130 15 FS 380/20 215 40 (± 20) 378 378 21 300 70 15

Removablewithout destruction of the adjacent floor


Extremely flat, fixing without armsideal for redevelopment, refurbishment, renovation



We recommend fixing with Stainless steel Multi-Monti Screws MMS F 7,5 x 95/30 ES (available ex stock), fixing distance: 200 mm.



23

MIGUTrans

bt bs/

b f max

h

bf max

bt / bs

h

Heavy duty profile small installation height

FS 255 / FS 295 / FS 410

Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 255/30 50 60 (± 30) 253 253 30 600 130 15FS 295/30 90 60 (± 30) 293 293 30 600 130 15 FS 410/30 205 60 (± 30) 410 410 30 300 70 15

Removablewithout destruction of the adjacent floor Symmetrical visible surface has no gapsavoids dirt accumulation

Extremely flat, fixing without armsideal for redevelopment, refurbishment, renovation



We recommend fixing with Stainless steel Multi-Monti Screws MMS F 7,5 x 115/50 ES (available ex stock). Fixing distance: 200 mm.

Colour: Aluminium, FS 410: Aluminium, anodizedProduction length: 3 m


24

MIGUTrans

Example: Sand Surface

bt

bs

b f max

h

FS 110 ES

Heavy duty profile with stainless steel- or brass-surfacefor highest demands

Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 110/30 ES 75 30 (± 15) 110 226 30 300 70 6,5FS 110/42 ES 75 30 (± 15) 110 230 42 300 70 6,5FS 110/52 ES 75 30 (± 15) 110 230 52 300 70 6,5FS 110/62 ES 75 30 (± 15) 110 230 62 300 70 6,5FS 110/77 ES 75 30 (± 15) 110 230 77 300 70 6,5FS 110/87 ES 75 30 (± 15) 110 230 87 300 70 6,5FS 110/97 ES 75 30 (± 15) 110 230 97 300 70 6,5

Stainless Steel inlayfor highest demands and skid resistance

Visible surface has no gapsavoids dirt accumulation Articulated telescoping systemabsorbs movement in 3 directions


Caroplan

Brass

Sand

Larger installation heights on request. Available with other metal surfaces, e.g.: Brass.

Colour: AluminiumProduction length: 4 m; Stainless steel or brass inlay: 2 x 2 m


25

MIGUTrans

bt

b f min

h

h 1

Medium duty profileProfiles for surface fixing

FSN 50

Profile Joint width Total Visible width Total width Installation Thickness of Load capacity* min. Movement of profile of profile depth alu side plates bf min ∆bf bs bt h h1 [mm] [mm] [mm] [mm] [mm] [mm] FSN 50 55 10 (± 5) 173 173 15 3 Pedestrians


Visible surface has no gapsavoids dirt accumulation Striated surfaceensures good skid resistance


Ideal for redevelopment, refurbishment, renovation

* light vehicles on request



26

MIGUTrans

bt

b f min

h

h 1

FSN 99


Profile Joint width Total Visible width Total width Installation Thickness of Load capacity* min. Movement of profile of profile depth alu side plates bf min ∆bf bs bt h h1 [mm] [mm] [mm] [mm] [mm] [mm] FSN 99 100 40 (± 20) 219 219 15 3 Pedestrians


Symmetrical visible surface has no gapsavoids dirt accumulation Striated surface ensures good skid resistance


Ideal for redevelopment, refurbishment, renovation

* light vehicles on request



27

MIGUTrans

5.3

bt

b f min

h

bf max

bt

h

h1


FSN 146

Profile Joint width Total Visible width Total width Installation Thickness of Load capacity* min. Movement of profile of profile depth alu side plates bf min ∆bf bs bt h h1 [mm] [mm] [mm] [mm] [mm] [mm] FSN 146 153 50 (± 25) 390 390 21 6,3 Private cars


Symmetrical visible surface has no gapsavoids dirt accumulation Striated surfaceensures good skid resistance



Installation instructions:Any unevenness in the surface to which the profile is being fixed must be remedied by using an epoxy adhesive e.g. Reckli-Adhesive EP. Thereafter the aluminium brackets must be fixed on both sides with countersunk stainless steel screws e.g. Multi Monti type MMS-7,5 ES or similar, at 200 mm intervals.


28

MIGUTrans

FSN 75 / 110 / 130 / 160

6

FSN 110

h

b f max

b tbt

h

h1

bf min


Visible surface has no gapsavoids dirt accumulation Striated surface ensures good skid resistance


FSN


Profile Joint width Total Visible width Total width Installation Thickness of Load capacity Load capacity Load capacity max. Movement of profile of profile height alu side plates bf min ∆bf bs bt h h1 [mm] [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FSN 46* 50 20 (± 10) 286 286 21 6,3 90 35 6,5FSN 75 84 20 (± 10) 320 320 21 6,3 90 35 6,5FSN 105 112 20 (± 10) 348 348 25 6,3 90 35 6,5 FSN 110 118 30 (± 15) 354 354 21 6,3 90 35 6,5FSN 130 142 40 (± 20) 378 378 28 6,3 90 35 6,5FSN 155 162 40 (± 20) 398 398 24 6,3 90 35 6,5FSN 160 170 60 (± 30) 406 406 34 6,3 90 35 6,5FSN 185 200 60 (± 30) 414 414 18 6,3 90 35 6,5FSN 280 240 60 (± 30) 465 465 21 6,3 90 35 6,5

* cannot take settlements

Colour: AluminiumProduction length: 4 m, FSN 185 and FSN 280: 3 m


29

MIGUTrans

FSN 105 / 155

FSN 185

7h

b f max

b t

FSN 185

bf min

bt

h

h1

FSN 46

5

bt bs/

b f max

h

bt

h h

1

bf min

6

FSN 105

b t

b f max

h

bf min

bt

h

h1

FSN


Installation instructions:Any unevenness in the surface to which the profile is being fixed must be remedied by using an epoxy adhesive e.g. Reckli-Adhesive EP. Thereafter the aluminium brackets must be fixed on both sides with countersunk stainless steel screws e.g. Multi Monti type MMS-7,5 ES or similar, at 200 mm intervals.


30

MIGUTrans

bt

bs

b f max

h

Heavy duty profilefor transportation free from vibration

FS 100

Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FS 100/30 50 20 (± 10) 102 236 30 300 75 9FS 100/40 50 20 (± 10) 102 236 40 300 75 9FS 100/50 50 20 (± 10) 102 236 50 300 75 9


Transportation free from vibrationsuitable for transport of sensitive goods Articulated telescoping systemabsorbs movement in 3 directions


Official test certificate on load capacity available



31

MIGUTrans

bt bs/

b f max

h

bf max

bt / bs

h

FSS 215

Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] FSS 215/23 60 40 (± 20) 215 215 23 600 130 30

Heavy duty profilefor transportation free from vibration

Innovative aluminium alloyfor highest load capacity

Extremely flat 23 mm, fixing without armsTime and cost saving installation, ideal for redevelopment Transportation free from vibration from a wheel width of 100 mmsuitable for transport of sensitive goods

Absorbs horizontal movement (transverse and parallel) not suitable for vertical movement Solid all metal-profilehard wearing, maintenance-free, long lasting

We recommend fixing with galvanized Multi-Monti Screws MMS P 10 x 70 (available ex stock). Fixing distance: 300 mm.



32

MIGUTrans

bt

bs

b f max

h

STS 100

Heavy duty profile for highest load capacityfor transportation free from vibration

Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] STS 100/30 ES 35 20 (± 10) 105 215 32 600 150 75STS 100/50 ES 35 20 (± 10) 105 215 52 600 150 75STS 100/60 ES 35 20 (± 10) 105 215 62 600 150 75

Steel-/Stainless steel-Combinationfor highest load capacity by pallet trucks, fork lift trucks, heavy lorries, special vehicles, etc.

Transportation free from vibration from a wheel width of 100 mmsuitable for transport of sensitive goods

Absorbs horizontal movement (transverse and parallel)Not suitable for vertical movement

Larger joint width or movement capacity or special heights on request.

Material - Surface: stainless steel 304 or 316Ti, - Sub-construction: black steel, galvanized steel or stainless steel (please state at order).Production length: 1,96 m


33

MIGUTrans

bt

bs

b f max

h


STS 160




Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] STS 160/30 ES 60 40 (± 20) 165 235 32 600 150 75STS 160/45 ES 60 40 (± 20) 165 235 47 600 150 75STS 160/60 ES 60 40 (± 20) 165 235 62 600 150 75


Material - Surface: stainless steel 304 or 316Ti, - Sub-construction: black steel, galvanized steel or stainless steel (please state at order).Production length: 1,96 m


34

MIGUTrans

bt bs/

bA

b f max

h

STS 160/16 / STS 160/22



Transportation free from vibration from a wheel width of 100 mmsuitable for transport of sensitive goods Extremely flat (16 mm), fixing without armsTime and cost saving installation, ideal for redevelopment


Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] STS 160/16 ES 30 40 (± 20) 165 165 17 600 150 75STS 160/22 ES 30 40 (± 20) 165 165 22 600 150 75


We recommend fixing with galvanized Multi-Monti Screws MMS F 7,5 x 90/35 (available ex stock), fixing distance: 300 mm.

Material - Surface: stainless steel 304 or 316Ti, - Sub-construction: black steel, galvanized steel or stainless steel (please state at order).

Production length: 1,96 m


35

MIGUTrans

bt

bs

b f max

h


STW 100 Watertight




Additional sealing layer Watertight in connection with connection joint

Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] STW 100/30 ES 35 20 (± 10) 105 215 31 600 150 75STW 100/50 ES 35 20 (± 10) 105 215 51 600 150 75STW 100/60 ES 35 20 (± 10) 105 215 61 600 150 75



Sealing layer: Wolfin IBProduction length: 1,96 m


36

MIGUTrans

bt

bs

b f max

h

STW 160 Watertight





Additional sealing layerWatertight in connection with connection joint

Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm width of wheel] STW 160/30 ES 60 40 (± 20) 165 235 32 600 150 75STW 160/45 ES 60 40 (± 20) 165 235 47 600 150 75STW 160/60 ES 60 40 (± 20) 165 235 62 600 150 75



Sealing layer: Wolfin IBProduction length: 1,96 m


37

MIGUTrans

Notes


38

MIGUTrans

FS 50 E4

FS 99 E4

FS 146 E4

bt

h 2

bs

b f max

h

bf max

hE

bs

bt

h

b t

b s

b f max

h

h2

FS 146/4200 E4

bf max

hE

bs

bt

hbs

b f max

h E

bt

h

bs

b f max

h E

bth

bf max

hE

bs

bt

h

Corner Versions FS E4


39

MIGUTrans

FS 75 E4FS 110 E4FS 130 E4FS 160 E4

FS 40 E4

b t

b s

h

b f max

FS 40/3500 E4

h2

FS 185 E4

bf max

hE

bs

bt

h

b s

b f max

FS 110/6200 E4

b t

h

h2

bf max

hE

bs

bt

h

bs

b f max

h E

bt

h

bs

b f max

h E

bt

h

bf max

hE

bs

bt

h



40

MIGUTrans

FSV 235 E4FSV 280 E4

FS 105 E4FS 155 E4

FSV 335 E4

h2

h

b f max

b sb t

FSV 335/45 E4

hE

bf max

bs

h

bt

b s

b f max

h E

b t

h E

bf max

hE

bs

bt

h

bs

b f max

h E

bt

h

hE

bs

bf max

bt

hCorner Versions FS / FSV E4


41

MIGUTrans

h 2

bt

b f max bf max

bt

hE

FSN 50 E4 FSN 99(FSN 146 E4)

FSN 105 E4FSN 155 E4

FSV 285 E4

bs

b f max

h E

bf max

bt

hE

bf max

b t

h2

h

b f maxFSN 99/20 E4

bf max

bt

hE

b t

b s

h2

b f max

h

FSV 285/40 E4

h

bf max

bt

bs

hE

hCorner Versions FSV / FSN E4


42

MIGUTrans

FS 75 E3FS 110 E3 FS 130 E3FS 160 E3

FS 50 E3

FS 99 E3

bt

bs

b f max

h

h 2

bf max

hE

h

bs

bt

bs

b f max

h E

bt

h

bf max

hE

bs

bt

h

b s

b f max

h E

b t

h

bf max

hE

bs

bt

hCorner Versions FS E3


43

MIGUTrans

bs

b f max

h E

bt

h

bs

b f max

h E

bt

h

FS 185 E3

bf max

hE

h

h

bs

bt

FS 155 E3

bf max

hE

bs

bt



44

MIGUTrans

Corner VersionsDimensions

Profile Installation height* Corner-Version E3 Corner-Version E4 h bs bt min. joint depth bs bt hE

[mm] [mm] [mm] [mm] [mm] [mm] [mm] FS 40** 19, 35, 60 40 101 35 44 105 40FS 46** 50 48 109 35 52 113 40FS 50 20, 35, 50 53 97 31 55 99 40FS 75 22, 30, 42, 52, 62, 77 ,87, 97 81 141 60 81 141 40FS 99 20, 35, 50 99 143 31 101 145 40FS 105 30, 42, 52, 62 109 169 60 109 169 40FS 110 42, 52, 62, 77 ,87, 97 114 174 60 114 174 40FS 130 30, 42, 52, 62, 77 ,87, 97 138 198 60 138 198 40FS 146 22, 30, 42, 52, 62, 77 ,87, 97 150 210 60 150 210 40FS 155 30, 42, 52, 62 159 219 60 159 219 40FS 160 42, 52, 62, 77 ,87, 97 166 226 60 166 226 40FS 185 27, 40, 80 186 246 75 186 246 50FSV 235 45, 80, (90), (130), (140) 210 271 75 210 271 50FSV 280 45, 80, (90), (130), (140) 256 317 75 256 317 50FSV 285 27, 40, 80 284 354 75 284 354 50FSV 335 45, 80, (90), (130), (140) 311 372 75 311 372 50FSN 46 - 165 35 - 165 40FSN 50 - 113 31 - 115 40FSN 75 - 202 60 - 202 40FSN 99 - 161 31 - 161 40FSN 105 - 228 60 - 228 40FSN 110 - 236 60 - 236 40FSN 130 - 260 60 - 260 40FSN 146 - 272 60 - 272 40FSN 155 - 280 60 - 280 40FSN 160 - 288 60 - 288 40FSN 185 - 303 75 - 303 50FSN 280 - 342 75 - 342 50 * other heights available on request ** Corner Version on request only


45

MIGUTrans

FS 75/62-150

FS 75/22-62

Examples for applicationCombined expansion joint systems


46

MIGUTrans

280 280

280 280

MIGUTRANS expansion joint system installed in existing block out: Profile: FS 75/22

MIGUTRANS expansion joint system , e.g. in connection with hardened paving, magnesite floor screed: Profile: FS 75/22

Examples for applicationSmall installation heights for blockouts


47

MIGUTrans

280

280

280

280

MIGUTRANS expansion joint system with aluminium support plates for extremely wide expansion joints

MIGUTRANS expansion joint system for large installation heights

Examples for applicationlarge installation heightsextremely wide expansion joints


48

MIGUTrans

MIGUTRANS expansion joint system with MIGUFOL vapour barrier

Examples for applicationin combination with MIGUFOL vapour barrier


49

MIGUTrans

Examples for applicationConnections to Walls/Columns


50

MIGUTrans

For the one-piece anchorage units, positive connection of the individual profile lengths is obtained by use of slide-in connection pins.

For a two-piece anchorage unit, this connection is obtained by staggering the joints in the individual aluminium profiles.

FS 100/30 (two-piece anchorage unit)

Connection of single length Example FS

Additional intersections on request.

Intersections Examples

FS 75/42 (one-piece anchorage units)


51

MIGUTrans

Intersections Examples


52

MIGUTrans

Goethe-Galerie Jena, Germany

Beverage Warehouse Kempf, Germany – STS 100 Airport Hamburg, Underground, Germany – FS 40

Shopping Mall Sachsen Allee, Chemnitz, GermanyUniversity Hospital, Jena, Germany

Shopping Mall, CentrO, Oberhausen, Germany – FS 75 / FS 110Shopping Mall Loop5, Weiterstadt, Germany – FS 75

Hospital UKB Marzahn, Berlin Germany

Exhibition Leipzig, Germany Exhibition Leipzig, Germany

Airport Frankfurt, Germany – STS 160

Illustrations of applications

53

MIGUTrans

Main Railway Station Frankfurt, Germany – FS 40 Bionorica SE, Neumarkt, Germany – STS 160

SIG Combibloc, Wittenberg, Germany

Shopping Mall Halle Mitte, Halle, GermanyAirport Hamburg, Germany – FH FS 40 / ESF 10 / ESF 65

Festhalle, Exhibition, Frankfurt, Germany – FS 75

Millenium Bridge, London, UK

Airport Frankfurt, Germany – FS 185

Railway Station Adlershof, Berlin, Germany

Illustrations of applications

54

MIGUTrans

MIGUa

MIGUA Headquarters in Wuelfrath

At a glance

MIGUA. Market leader in Europe for more than 50 years.

MIGUA is completely focused on expansion joint systems. Leading

architects, designers and general contractors specify our products for

national and international projects. We will gladly provide you with

a list of references, on request. MIGUA expansion joint systems are

used from Abu Dhabi to Zurich providing protection, functionality

and architectural excellence on a permanent basis.

They are used in many different building types, e.g. shopping

malls, airports, exhibition halls, hospitals, industrial plants, storage

facilities, car parks and pedestrian bridges. It is our passion to

be innovative, to supply perfect quality and to develop solutions

according to customer requirements.

Technology. Innovative from experience.

Competence does not appear by chance. More than 10 million metres

of MIGUA movement joint systems have, over decades, been installed

worldwide to the satisfaction of architects, designers, builders and

owners. We are leaders in technological development in Europe as

witnessed by numerous patents and test certificates.

MIGUA engineers are, on an ongoing basis, designing and developing

new profiles with enhanced characteristics which lead to time and cost

saving installations. Through the use of special materials safety features

are improved and stringent performance tests are conducted on all

new products.

Quality. Made in Germany.

MIGUA products combine optimum solutions with excellence in

design, high quality materials and safety features which are supported

by our standard warranties. Quality makes the pre-condition for

product safety. That is why MIGUA develop and manufacture

in Germany. Only products on the highest standard achieve the

necessary durability and allow required warranties.

Due to this reason MIGUA is able to offer such warranties.

Beyond the technical quality of our products the main target of

the MIGUA quality management is the utmost satisfaction of our

customers. Each operation and work step is described and will be

recorded. From the first idea through research and development up

to successful market launch. Just this makes MIGUA successful.

LOAD CAPACITy FS 110

FATIGUE LOADING

SkID RESISTANCE

LOAD CAPACITy / WATERTIGHTNESS

55

MIGUTransMIGUa

Contact

Solutions. Which work.

By ensuring the technical quality of our products MIGUA can attain

its primary goal of complete customer satisfaction. We understand

the expectations of our customers, and how to exceed them.

This requires a strong commitment for special requests and solutions.

MIGUA is prepared for it – from the beginning. We are always

available for your questions or giving advice to find the solution our

customers need. Our products are supported by a national network

of technical experts, close cooperation with our world-wide partners

and an experienced international export team.

MIGUA offers the perfect solution for your project.

At a glance

56

MIGUTrans FUGENSYSTEME

MIGUA offers a comprehensive product portfolio of expansion joint covers and systems with outstanding features.

Quality. Made in Germany.

Postal address: PO Box 1260 · 42479 WuelfrathHeadquarters: Dieselstr. 20 · 42489 Wuelfrath

Phone +49 2058 774-0 Fax +49 2058 774-48

[email protected] www.migua.com

FUGENSySTEME GMBH & CO. kG

Subj

ect

to t

echn

ical

cha

nge.

11

/201

1 -

5000

GB

MIGUTrans


MIGUTan

Watertight expansion joint systems for traffic

MIGUPrEn

Watertight expansion joint systems for roofs

MIGUMaX

Earthquake resistant expansion joint systems

MIGUTEC

Expansion joint profiles

Increasing architectural requirements as well as new construction materials and processes demand optimized expansion joint systems. For this reason, MIGUA is your experienced partner since we offer more than 600 different profiles for a wide range of applications.

Our product range covers 5 application orientated product groups as detailed below. In addition to standard profiles our R&D engineers provide highly sophisticated solutions for special or non-standard applications.

MIGUA provides solutions for extraordinary challenges.

Documents

Heavy duty expansion joint systems - mageba | · PDF fileHeavy duty expansion joint systems for use by fork lift trucks and pallet trucks ... fixing on finished surfaces for refurbishment,