Heat Shrinkable Tubing 3.0

Inspired by Paul Hellermann

3.1 Material Overview .........................................................................................122-125

3.2 Heat Shrink Tubing Size Overview ........................................................................126

3.3 Which Heat Shrink Suits You? .......................................................................127-128

3.4 Heat Shrinkable Tubing

- Heat Shrinkable Tubing ............................................................................130-148

- Heat Gun and Optional Accessories ..........................................................149-150

3.5 Heat Shrinkable Moulded Shapes

- Heat Shrinkable Moulded Shape Profi les ..........................................................152

- Material Overview ...........................................................................................153

- Heat Shrinkable Moulded Shapes .............................................................154-164

- Heat Shrinkable Moulded Shape Profiles Available on Request .........................165

3.0

3/122

Material OverviewHeat Shrinkable Tubing

SGP POX -55°C to +135°C 2:1 -5% max.

Typ

e

Mat

eria

l

Op

erat

ing

Tem

per

atu

re [

ºC]

Shri

nk

Rat

io

Lon

git

ud

inal

ch

ang

e af

ter

com

ple

te s

hri

nka

ge

[%]

Heat Shrink Tubing Kits

HTHSKBK POX -55°C to +135°C 2:1 +/-5% max.HTHSKCL POX -55°C to +110°C 2:1 +1%/-15% max.CP Mini Reels / Packs POX -55°C to +135°C 2:1 -5% max.

Heat shrink Tubing(General Purpose)

LVR -30°C to +105°C 2:1 +/-10% max

Heat shrink Tubing, Thin Wall

HFT-A POX -55°C to +135°C 2:1 -5% max.HFT-B POX -55°C to +135°C 2:1 -5% max.HFT-333 POX -55°C to +125°C 3:1 -15% max.TCN20 POX -55°C to +125°C 2:1 +/- 5%TL27 POX -55°C to +135°C 2:1 +5%/-15%TF21 POX -55°C to +135°C 2:1 +/- 5%TF24 POX -55°C to +135°C 2:1 +/-5% max.TF31 POX -55°C to +135°C 3:1 -10% max

Heat shrink Tubing, Thin Dual Wall

EPS-300 POX -55°C to +110°C 3:1 -10% max.EPS-400 POX -55°C to +110°C 4:1 -10% max.TA32 POX -55°C to +125°C 3:1 -15% max.TA42 POX -55°C to +125°C 4:1 -15% max.

Heat shrink Tubing, Medium Wall

IMCSA POX -55°C to +110°C up to 4:1 -10% max

Heat shrink Tubing, Medium Dual Wall

TREDUX MA47 POX -55°C to +80°C up to 4:1 -10% maxMA47 POX -55°C to +80°C up to 4:1 -10% max.

These details are only rough guide values. They should be regarded as a material specification and are no substitute for a suitablity test. Please see our datasheets for further details.

SuitableOf limited suitability

++ Very good+ Goodo Limited

üo

** Legend

3.0

3/123

Material OverviewHeat Shrinkable Tubing

Silic

one-

free

ü ü

Self-

extin

guis

hing

Cop

per

com

patib

ility

(non

-cor

rosiv

e)

Prin

tabl

e

Res

ista

nt

pro

per

ties

UV

ligh

t*

Solv

ents

Fuel

s

Aci

ds a

nd b

ases

Poss

ible

In

du

stri

es

Har

ness

mak

er

Elec

tron

ics

Aut

omot

ive

indu

stry

Mot

or s

port

Rail-

born

e ve

hicl

es

Mili

tary

Avi

atio

n

Ship

bui

ldin

g

Repa

ir of

und

ergr

ound

cab

les

Ener

gy s

uppl

y

Ind

ust

ries

Elec

tric

al in

sula

tion

Col

our

mar

king

Stra

in r

elie

f

Ant

i-kin

king

pro

tect

ion

Prot

ectio

n ag

ains

t m

oist

ure

20kV/mm according to ASTM D 2671 Yes Yes Yes + + o + 15kV/mm according to IEC 60684 P2 Yes** Yes Yes + + o + 25kV/mm according to IEC 60684 P2 Yes Yes Yes + + o +

15kV/mm according to IEC 24315kV/mm according to IEC 243

YesYes

YesYes

YesYes

++

oo

oo

oo

20kV/mm according to IEC 60684 P2 Yes Yes Yes Yes + + + + 20kV/mm according to IEC 60684 P2 Yes Yes Yes + + + + 19.7kV/mm Yes Yes Yes Yes + + o + 20kV/mm according to ASTM D2671 Yes Yes Yes Yes + + o + 22kV/mm according to IEC 60684 P2 Yes Yes + + o + 37kV/mm Yes Yes Yes + + + + 46kV/mm Yes Yes Yes + + + + 37kV/mm Yes Yes Yes Yes + + + +

15kV/mm according to IEC 60684 P2 Yes** + + o + 15kV/mm according to IEC 60684 P2 Yes** Yes Yes + + o + 15kV/mm according to IEC 60684 P2 Yes** Yes Yes + + o + 15kV/mm according to IEC 60684 P2 Yes** Yes Yes + + o +

20kV/mm Yes Yes Yes + o o +

20kV/mm Yes Yes + o o + 20kV/mm Yes Yes + o o +

ü üü ü

üü

üü ü üü ü

ü

üü

ü

ü

ü ü üüü

ü üü

üüü

ü

üü

üüü

ü üüüü

üüüü

üüüü

ü

üüüüüüü

üü

ü

ü

üüüüüüüü

ü

üüü

üüüü

ü

üü

ü ü ü ü ü

ü ü ü ü üü ü ü ü ü

üüüüüüüü

ü

ü

ü

ü

ü

ü ü üü ü ü

Die

lect

ric

stre

ng

th [

kV/m

m]

Tech

nic

al D

ata

* Only valid for Central European climate.

** Only outer sleeve.

3.0

3/124

Material OverviewHeat Shrinkable Tubing

TR27

-10% max

Heat shrink Tubing, Heavy Wall

HU47 POX -55°C to +110°C up to 3.5:1 -10% max

Heat shrink Tubing, Heavy Dual Wall

TREDUX HA47 POX -55°C to +80°C up to 3.5:1HA47 POX -55°C to +80°C up to 3.5:1 -10% max.

Heat shrink Tubing for Special Purposes

PST-H PES -75°C to +150°C 2:1 -10% max.PST-HT PES -75°C to +150°C 2:1 -10% max.Viton-E FPMX -55°C to +200°C 2:1 -10% max.Kynar PVDFX -55°C to +175°C 2:1 -5% max.TFE2 PTFE -70°C to +260°C 2:1 -20% max.

POX -40°C to +105°C 2:1 +5%/-10% max.

Typ

e

Mat

eria

l

Op

erat

ing

Tem

per

atu

re [

ºC]

Shri

nk

Rat

io

Lon

git

ud

inal

ch

ang

e af

ter

com

ple

te s

hri

nka

ge

[%]

These details are only rough guide values. They should be regarded as a material specification and are no substitute for a suitablity test. Please see our datasheets for further details.

SuitableOf limited suitability

++ Very good+ Goodo Limited

üo

** Legend

3.0

3/125

Material OverviewHeat Shrinkable Tubing

++

++

++

Die

lect

ric

stre

ng

th [

kV/m

m]

Self-

extin

guis

hing

Silic

one-

free

Cop

per

com

patib

ility

(non

-cor

rosiv

e)

Prin

tabl

e

Res

ista

nt

pro

per

ties

UV

ligh

t*

Solv

ents

Fuel

s

Aci

ds a

nd b

ases

Poss

ible

In

du

stri

es

Har

ness

mak

er

Elec

tron

ics

Aut

omot

ive

indu

stry

Mot

or s

port

Rail-

born

e ve

hicl

es

Mili

tary

Avi

atio

n

Ship

bui

ldin

g

Repa

ir of

und

ergr

ound

cab

les

Ener

gy s

uppl

y

Ind

ust

ries

Elec

tric

al in

sula

tion

Col

our

mar

king

Stra

in r

elie

f

Ant

i-kin

king

pro

tect

ion

Prot

ectio

n ag

ains

t m

oist

ure

20kV/mm Yes

YesYes

Yes

Yes

YesYes YesYesYes Yes

YesYes Yes

YesYes Yes

YesYes Yes

YesYes Yes

Yes

+ o o + ü ü ü ü ü

20kV/mm + o o + ü ü ü ü ü ü20kV/mm + o o + ü ü ü ü ü ü

20kV/mm according to IEC 60684 P2 + + ++

++

++ ++

++

++

++

+ ü ü ü ü ü ü 20kV/mm according to IEC 60684 P2 + + + ü ü ü ü ü ü 15kV/mm according to IEC 60684 P2 + ü ü ü ü ü ü 30kV/mm according to IEC 60684 P2 + + + ü ü ü ü ü 40kV/mm according to DIN 53481 + ü ü ü ü

15kV/mm according to IEC 60684 P2 + + + ü ü ü ü

3.0

3/126

Heat Shrink tubing Size OverviewHeat Shrinkable Tubing

Overview of Industries for Heat Shrink Tubing

When selecting the correct heat shrink tubing size, it is important to bear in mind the 80:20 rule. The heat shrink tubing must shrink by at least 20% and not more than 80% of its complete shrinkage capacity to achieve the right result. In our overview of Industries you will find the best heat shrink tube for every cable diameter. The 80:20 rule has of course been taken into account in the table.

Heat shrink tubing with a shrinkage ratio of 3:1

With the optimal shrinkage ratio of 3:1. you can cover a wide range of Industries with just a few sizes. This leads to reduced stock expenditure and requires less space. 3:1 heat shrink tubes: EPS-300; HFT-333.

Size Cable / Wirediameter

3.0/1.0

12/4.0

39/13

1.5/ 0.5

6.0/2.0

24/8

0.7mm

1.3mm

1.4mm

2.6mm

2.8mm

5.2mm

5.6mm

10.4mm

11.2mm

18.2mm

20.8mm

34.6mm

Shrink ratio 3:1

1.2/ 0.6

3.2/1.6

6.4/3.2

12.7/6.4

25.4/12.7

50.8/25.4

101.6/50.8

Size Cable / Wirediameter

2.4/1.2

4.8/2.4

9.5/4.7

19.1/9.5

38.1/19.1

76.2/38.1

0.7mm

1.1mm

1.4mm

1.9mm

2.2mm

2.9mm

3.8mm

4.3mm

5.7mm

5.8mm

7.7mm

8.6mm

11.4mm

15.2mm

17.2mm

22.9mm

30.5mm

34.3mm

45.7mm

61.0mm

68.6mm

91.4mm

Shrink ratio 2:1

3:1

Heat shrink tubing with a shrink ratio of 2:1

LVR; HCP; CP; HFT-A; HFT-B; SGP; PST-H; PSTHT; VITON-E; Kynar; TFE-2; TR27; SR27

2:1

3.0

3/127

Which Heat Shrink Suits You?Heat Shrinkable Tubing

Choosing the right heat shrink tube

The 80:20 rule means that a heat shrink tube should shrink by a maximum of 80% and a minimum of 20%.

For example:

A cable with a diameter of 5.0mm is to be wrapped in heat shrink tubing. In theory both sizes 6/2 and 12/4 would be suitable, since the required diameter of 5.0mm lies within the shrink range of both tube sizes.

The smallest Industry diameter of size 12/4 is 5.6mm.This size is therefore unsuitable for a cable diameter of 5.0mm.

Inch

mm

Inch

mm

Conversion from imperial to metric

1/32“

0.8

1/2“

12.7

3/64“

1.2

5/8“

15.9

1/16“

1.6

3/4“

19.1

5/64“

2.0

1.0“

25.4

3/32“

2.4

1 1/4“

31.8

1/8“

3.2

1 1/2“

38.1

3/16“

4.8

2.0“

50.8

1/4“

6.4

3.0“

76.2

3/8“

9.5

4.0“

101.6

Size 6/2 has a range of Industry of between 2.8mm and 5.2mm and is therefore suitable for the cable diameter of 5.0mm.

Size 12/4

Maximum shrink (100%)

Size 6/2

Maximum shrink (100%)

Maximum shrinkage = 4.0mm Maximum shrinkage = 8.0mm

Optimum shrinkage max. (80%)Optimum shrinkage max. (80%)

Shrinkage of 3.2mm Shrinkage of 6.4mm

12 10.4

Optimum shrinkage min. (20%)Optimum shrinkage min. (20%)

Shrinkage of 0.8mm Shrinkage of 1.6mm

Busbars

Determine the outside as follows:Add the four sides and divide by 3.14

NB: The answer will relate to the OD you want to shrink down to. Allowance must be made for the size to give sufficient clearance to slip easily over the bar +10% is a good estimation.

e.g: Busbar size = 25.0 x 3.0mm = 25 + 25 + 3 + 3 = 56 ÷ 3.14 = 17.83 (+ 10% for clearance) = 19.61mm - Most suitable diameter (19.0mm)

3.0

3/128

Which Heat Shrink Suits You?Heat Shrinkable Tubing

Lay Flat Sizes Chart

The lay flat size of heat shrink tube is NOT the Internal Diameter of the tubing.

The lay flat size however is indicative to the approximate ID which will always be smaller than the mm measured(Refer to chart). This chart refers to the standard sizes offered in our range.

25mm

3mm

F

42mm

D = 2F 3.14 = 2 x 42p = 84D = 26.8

Flat (mm) Internal Diameter

2.0 1.3

2.5 1.6

4.0 2.4

6.0 3.2

8.0 4.8

11.0 6.4

16.0 9.5

21.5 12.7

32.5 19.0

40.0 - 43.0 25.4

63.0 - 64.5 38.1

84.0 - 85.0 50.8

129.0 76.2

166.5 102.0

222.0 120.0

3.4 Heat Shrinkable Tubing

Joint Kits 130

Pre-Packs 131

Heat Shrink 132

General Purpose 133-134

Mill Spec 135-136

Flame Retardant 137

Low Heat 138

Transparent 139-140

Specialised 141

Specialised Thick Wall 142

Heavy Duty 143

Specialised 144-146

High Temperature 147

Flame Retardant 148

Heat Guns and Optional Accessories 149-150

3.0

3/129

Heat Shrinkable TubingHeat Shrinkable Tubing

3/130

Joint KitsHeat Shrinkable Tubing

Heat shrink Joint Kits

Features and Benefits

• Excellent impact and abrasion resistance• Excellent environmental and UV properties• Hot melt adhesive ensures excellent protection against

moisture• High electrical insulation properties• Excellent strain relief and mechanical protection• Quick and easy installation

1.5 - 4.0

6.0 - 16.0

25.0 - 50.0

70.0 - 150.0

185.0 - 300.0

1.5 - 6.0

6.0 - 16.0

HSJKL154

HSJKL616

HSJKL2550

HSJKL70150

HSJKL185300

HSJKS156

HSJKS616

Ordering Information

IndustryCode

Standard

Standard

Standard

Standard

Standard

Submersible

Submersible

Cable Size mm2 (3 & 4 Core)

Note:1) Standard kit contains inner, outer and 4 ferrule heat shrink sleeves,

2 roll springs, tinned copper braid and instruction leaflet.2) Submersible kit contains inner, outer and 4 ferrule heat shrink sleeves

and instruction leaflet.3) Due to variations in cable sizes, ferrules are not included.

UL 224>14

UL 224>400

ISO 6210MPa

Operating Temperature -55ºC to *135/110ºC(*insulation/sheaths)

2:1

120ºC

Polyolefin

600/1000V

3.0

3.0

3/131

Pre-PacksHeat Shrinkable Tubing

2.4 - 4.8 x 10 each / 6.4 - 25.4 x 5 each - (Black)

2.4 - 12.7 x 5 each / 19.0 - 25.4 x 2 each - (Std Colours)

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

Recov.Ø (D)

All dimensions in mm. Subject to technical changes. Except for quantity in metre (m). Standard colours: Black, red, blue, white, yellow, green/yellow, clear. (Clear is not Self Extinguishing).

CP24P

CP32P

CP48P

CP64P

CP95P

CP127P

CP190P

CP254P

CPPKITBK

CPPKITCOL

Ordering Information

Wall (WT)nom.

2.4

3.2

4.8

6.4

9.5

12.7

19.0

25.4

SuppliedØ D

Code

0.5

0.5

0.5

0.6

0.6

0.6

0.8

0.9

1.2

1.6

2.4

3.2

4.8

6.4

9.5

12.7

Qty per Box (m)

Ideal for providing insulation of electrical connections, terminals, components and wiring systems. Requires a minimum shrink temperature if 120ºC and is well suited to manual as well as automatic methods of Industry. Suitable for use as a continuous insulation sleeve in a variety of industrial Industries.

Pre-Packs

Commercial Grade Polyolefin

2:1

-5% Max.

+120°C

-55°C to +125°C

Flame retardant except for clear

Type

Shrink Ratio

Longitudinal change after shrinkage

Minimum Shrink Temperature (Metric)

Operating Temperature

Flammability

Technical Data RoHSü

SHSTDP (1 m Pack).

3/132

Heat ShrinkHeat Shrinkable Tubing

HMT200A-tape.

Helashrink Hot Melt Tape HMT200A

The hot melt tape flows when heated and provides permanent air and water tight seals.

Application

Designed for use with heat shrink sleeving and mouldings.

1. Clean and preheat the part to be protected. 2. Wrap the tape around the part and overlap. 3. Put the tubing or heat shrinkable shape over the tape

and shrink down.

HMT200A

Ethylenevinylacetate (EVA)

Transparent (CL)

Starting from +95°C

-50°C to +105°C

DEFSTAN

Material

Colour

Melting Point

OperatingTemperature

Specification

Technical Data HF RoHSüü

HMT200A

CodeReel Length

(m)

50.0m

Thickness (T)

0.25 25.0

All dimensions in mm. Subject to technical changes.

Width (W)

Ordering Information

Adhesive tape HMT200A for sealing against humidity.

3.0

3.0

3/133

General PurposeHeat Shrinkable Tubing

Material

Colour

Shrink Ratio

Longitudinal change after shrinkage

Minimum Shrink Temperature

Operating Temperature

Dielectric Strength

Stocking Temperature

Shelf life

Flammability

Specification

Flexible Polyvinyl Chloride, Cadmium free (PVC)

Standard colours + Green Yellow

2:1

+/-10% max

+135°C

-30°C to +105°C

15kV/mm according to IEC 243

+25°C max.

12 Months max.

ASTM D2671

UL224 105°C 600V

Technical Data RoHSü

LVR used for mechanical protection.LVR

LVR Heat Shrinkable Tubing

LVR can be used for cable joints, low voltage busbars and batteries.

Features and Benefits

• PVC heat shrinkable tubing• Self-extinguishing• Good chemical resistance and mechanical protection

Wall (WT) nom.Code

Recov. Ø D

LVR12

LVR16

LVR24

LVR32

LVR48

LVR64

LVR95

LVR127

LVR159

LVR190

LVR254

Supplied Ø D

Reel Length (m)

1.2

1.6

2.4

3.2

4.8

6.4

9.5

12.7

15.9

19.0

25.4

500.0

500.0

500.0

500.0

500.0

250.0

150.0

100.0

50.0

50.0

50.0

0.6

0.8

1.2

1.6

2.4

3.2

4.8

6.4

7.9

9.5

12.7

0.40

0.40

0.40

0.40

0.50

0.60

0.60

0.70

0.80

0.80

1.00

Ordering Information

All dimensions in mm. Subject to technical changes. Colours available: Black, red, blue, white, yellow, green/yellow.

3/134

General PurposeHeat Shrinkable Tubing

SGP Flame-retardant Polyolefin

Features and Benefits

SGP General purpose heat shrink tubing is a cost effective product for numerous commercial insulation Industries. It provides effective electrical insulation and protection for in-line components, disconnect terminals and splices. It also bundles wires and cables for very flexible light-duty harnesses, use as strain-relieves for electrical wire connections and colour-codes wires, cables, terminals and components.

SGP Grade is a range of cost-effectively made flame retarded, chemically cross linked polyolefin heat shrink tubing with a 2:1 shrink ratio and a temperature rating of 125ºC. SGP tubing is very flexible and does not easily wrinkle when bent. It withstands higher temperature rating, provides better thermal stability and higher resistance to physical abuse than non-crosslinked materials.

The product comes in blue, yellow, black, white, red and transparent. Other colours are also available upon request. All colour tubings are flame retarded except for transparent tubing. The product can be supplied in continuous reels or in pre-cut sleeves.

Heat shrink tubing SGP.

All dimensions in mm. Subject to technical changes. Colours available: Black, red, blue, white, yellow, green/yellow.

Reel Length (m)

CodeSupplied

O.D.

SGP16

SGP24

SGP32

SGP48

SGP64

SGP95

SGP127

SGP190

SGP254

SGP381

SGP508

SGP762

SGP1016

Shrunk Wallmm (nominal)

Ordering Information

1.6

2.4

3.2

4.8

6.4

9.5

12.7

19.0

25.4

38.1

50.8

76.2

101.6

Recov.O.D.

0.430

0.508

0.508

0.508

0.635

0.635

0.635

0.762

0.889

1.020

1.140

1.27

1.40

0.8

1.2

1.6

2.4

3.2

4.8

6.4

9.5

12.7

19.1

25.4

38.1

50.8

300.0

250.0

150.0

125.0

65.0

75.0

75.0

75.0

50.0

25.0

25.0

25.0

25.0

Material

Shrink Ratio

Shrink Temperature Degree Cel

Operating temperature test mehod IEC26

Tensile strength test method ASTM-D-638 N/mm2

Elongation test method ASTM-D-638%

Low temp flexibility test method ASTM-D-2671 degree Cel

Specific gravity test method ASTM-D-792

Longitudinal change test method ASTM-D-638%

Dielectric strength test method ASTM-D-2671kV/mm

Dielectric constant test method ASTM-D-150

Flammability test method ASTM-D-2671

Water absorption test method ASTM-D-570

Chemical resistance

Copper Corrorsion test method ASTM-D-2671B

Volume resistance test method ASTM-D-257 ohm.cm

Specifications

Polyofelin, Cross-linked (PO-X)

Approx 2:1

>90ºC

-55ºC to 125ºC

14N/mm2

300%

-55ºC

1.30 Max

-10% Max

20kV/mm

3.0 Max

2-Flame retarded

0.15%

Good

Good

1014ohm.cm

UL-224 - 125ºC

Technical Data RoHSü

3.0

3.0

3/135

Mill SpecHeat Shrinkable Tubing

HFT-A conforms to major standards used in all Defence industries.

Insultite HFT-A, HFT-B

Features and Benefits

This flexible heat shrink tubing has many excellent properties including fast shrinking, easy handling, good mechanical strength and resistance against chemicals and solvents. It is UL-224 and CSA approved, easy to print on and available in a wide range of colours and internal diameters up to 101.6mm.

Industry

This high performance thin wall tubing is used extensively for electrical and mechanical protection. It is also well proven for sleeve marking to identify wiring circuits. It shrinks uniformly to form a permanent insulation covering.

The transparent version is used for bundling and cable protection where visual inspection is required. It is often used as a see through protective sleeve over cable markers.

HFT-A is coloured and self extinguishing.HFT-B is transparent and halogen free.

Ordering Information

Code

HFT-A 12

HFT-A 16

HFT-A 24

HFT-A 32

HFT-A 48

HFT-A 64

HFT-A 95

HFT-A 127

HFT-A 190

HFT-A 254

HFT-A 380

HFT-A 508

HFT-A 760

HFT-A 1016

Recov.Ø (D)

HFT-B 12

HFT-B 16

HFT-B 24

HFT-B 32

HFT-B 48

HFT-B 64

HFT-B 95

HFT-B 127

HFT-B 190

HFT-B 254

HFT-B 380

HFT-B 508

HFT-B 760

HFT-B 1016

CodeSupplied

Ø D

0.6

0.8

1.2

1.6

2.4

3.2

4.8

6.4

9.5

12.7

19.0

25.4

38.0

50.8

1.2

1.6

2.4

3.2

4.8

6.4

9.5

12.7

19.0

25.4

38.0

50.8

76.0

101.6

Wall (WT)nom.

0.4

0.4

0.5

0.5

0.5

0.6

0.6

0.6

0.8

0.9

1.0

1.1

1.3

1.4

All dimensions in mm. Subject to technical changes.

Material

Shrink Ratio

Longitudinal change after shrinkage

Minimum ShrinkTemperature

Operating Temperature

Insulation Class

Dielectric Strength

Flammability

Specification

Technical Data

Polyolefin, Cross-linked (PO-X)

2:1

-5% Max.

+100°C

-55°C to +135°C ,Intermittent +225°C

B (VDE 0530)

20kV/mm according to IEC 684 P2

Self extinguishing

DEF STAN 59-97/3, CUL, Only HFT-A: UL224, MIL-DTL-23053/5C, SAE - AMS - DTL-23053 / 5C, CSA

RoHSü

Mill SpecHeat Shrinkable Tubing

3/136

Standard colour

Black

Black

Black

Black

Black

Black

Black

Black

Wall thickness

fully recovered

(mm)

0.45

0.55

0.65

0.75

0.75

0.75

1.00

1.15

Bore recovered maximum

(mm)

Bore as supplied minimum

(mm)

Code

1.5

3.0

6.0

9.0

12.0

18.0

24.0

39.0

0.5

1.0

2.0

3.0

4.0

6.0

8.0

13.0

HFT1505

HFT31

HFT62

HFT93

HFT124

HFT186

HFT248

HFT3913

Ordering Information

HFT-333 High Flexible High Shrink Ratio Polyolefin

HFT-333 is a highly flexible, fast shrinking tubing offering superior properties. With excellent chemical and thermal resistance it is capable of meeting the toughest demands of the aerospace, military and railway industries.

HFT-333 has a 3:1 shrink ratio and can therefore easily cope with components of varying diameter, with no tendency to split.

HFT-333.

Material

Continuous Operating Temp

Intermittent Temp

Minimum Shrink Temp

Tensile Strength

Elongation

Flammability

Dielectric Strength

Polyolefin

-55ºC to +135ºC

+225ºC

+100ºC

18MPa

500%

100 MPa (SFM) Self extinguishing

25kV/mm

Technical Data RoHSü

All dimensions in mm. Subject to technical changes.

3.0

3.0

3/137

Flame RetardantHeat Shrinkable Tubing

TCN20 Self Extinguishing Heat Shrinkable Tubing

TCN20 is suitable for a wide range of Industries such as electrical insulation, mechanical protection and cable bundling.

TCN20 is a general purpose, flame retardant polyolefin tubing with good resistance to common fluids and solvents. This flexible, 2:1 shrink ratio tubing has an excellent physical and electrical performance. The low shrink temperature and good mechanical strength means this tubing is widely used in the electrical, electronics and automotive industries.

Features and Benefits

• Thin walled overexpanded polyolefin tubing• Inch size tubing with 3:1 shrink ratio• Very fast shrinking and low shrink temperature• Highly flame-retardant, UL224 VW-1

Heat shrink tubing TCN20.

TCN20

Material

Colour

Shrink Ratio

Longitudinal change after shrinkage

Minimum ShrinkTemperature

Operating

Temperature

Dielectric Strength

Flammability

Specification

Polyolefin, cross-linked (PO-X)

Black (BK)

2:1

+/- 5%

+100°C

-55°C to +125°C

20kV/mm according to ASTM D2671

Self extinguishing

CSA, UL224 125°C 600V VW-1

Technical Data RoHSü

All dimensions in mm. Subject to technical changes.

Reel Length (m)

300.0

300.0

300.0

300.0

300.0

300.0

150.0

100.0

60.0

60.0

30.0

30.0

Recov. Ø D

Supplied Ø DCode

Wall (WT) nom.

1.2

1.6

2.4

3.2

4.8

6.4

9.5

12.7

19.1

25.4

38.0

50.8

0.6

0.8

1.2

1.6

2.4

3.2

4.7

6.4

9.5

12.7

19.0

25.4

0.30

0.35

0.40

0.50

0.50

0.55

0.65

0.75

0.75

0.79

0.95

1.15

TCN20 12

TCN20 16

TCN20 24

TCN20 32

TCN20 48

TCN20 64

TCN20 95

TCN20 127

TCN20 191

TCN20 254

TCN20 381

TCN20 508

Ordering Information

3/138

Low HeatHeat Shrinkable Tubing

TL27

TL27 — a very flexible tubing for automotive or Industries where halogens cannot be accepted.

TL27 Low Heat Shrinkable Tubing

The product has a low shrink temperature which offers very fast recovery. Industry fields include covering of heat sensitive parts, mechanical protection and cosmetic covering.

Features and Benefits

• Very low shrink temperature• Fast shrinking• Halogen free

HF RoHSüüMaterial

Colour

Shrink Ratio

Longitudinal change after shrinkage

Operating Temperature

Minimal Shrink Temperature

Flammability

Polyolefin, cross-linked (PO-X)

Black (BK)

2:1

+5%/-15%

-55°C to +135°C

+90°C

FMVSS 302

Technical Data

Reel Length (m)

500.0

500.0

500.0

300.0

150.0

100.0

100.0

100.0

100.0

100.0

100.0

100.0

Recov. Ø D

Supplied Ø D

CodeWall (WT)

nom.

1.2

1.6

2.4

3.2

4.8

6.4

9.5

12.7

19.1

25.4

38.0

50.8

0.6

0.8

1.2

1.6

2.4

3.2

4.7

6.4

9.5

12.7

19.0

25.4

0.31

0.33

0.36

0.39

0.42

0.45

0.48

0.52

0.58

0.67

0.76

0.85

TL27 12

TL27 16

TL27 24

TL27 32

TL27 48

TL27 64

TL27 95

TL27 127

TL27 191

TL27 254

TL27 381

TL27 508

Ordering Information

All dimensions in mm. Subject to technical changes.

3.0

3.0

3/139

TransparentHeat Shrinkable Tubing

TF24 Transparent Heat Shrinkable Tubing

Protects wire and cable markers subject to abuse, while permitting inspectability of each item covered. Protects electronic components while permitting their identification and inspection.

Features and Benefits

• Transparent, flexible polyolefin tubing• Protects identification marking perfectly• Halogen free• Good mechanical and chemical resistance• VG-approval and additional industrial approvals

TF24 transparent tubing with 2:1 shrink ratio.

Material

Colour

Shrink Ratio

Longitudinal change after shrinkage

Minimum Shrink Temperature

Operating Temperature

Dielectric Strength

Flammability

Specification

Polyolefin, Cross-linked (PO-X)

Transparent

2:1

+/-5% Max.

+110°C

-55°C to +135°C

≥ 30kV/mm min. according toASTM D2171

Not flame retarded

DEF STAN 59-97 Type 2B, SAE - AMS - DTL-23053/5 Class 2, VG 95343

Technical Data HF RoHSüü

Code

Heat shrinkable tubing 2:1

TF2412

TF2416

TF2424

TF2432

TF2448

TF2464

TF2495

TF24127

TF24190

TF24254

TF24380

TF24508

TF24760

TF241016

Wall (WT) nom.

100.0

100.0

100.0

100.0

60.0

60.0

50.0

50.0

50.0

50.0

60.0

60.0

30.0

15.0

Supplied Ø D

Recov. Ø D Colour

Standard Reel (m)

0.41

0.43

1.51

0.51

0.51

0.64

0.64

0.64

0.76

0.89

1.02

1.14

1.27

1.40

Transparent (CL)

Transparent (CL)

Transparent (CL)

Transparent (CL)

Transparent (CL)

Transparent (CL)

Transparent (CL)

Transparent (CL)

Transparent (CL)

Transparent (CL)

Transparent (CL)

Transparent (CL)

Transparent (CL)

Transparent (CL)

1.2

1.6

2.4

3.2

4.8

6.4

9.5

12.7

19.1

25.4

38.1

50.8

76.2

101.6

0.6

0.8

1.2

1.6

2.4

3.2

4.8

6.4

9.5

12.7

19.1

25.4

38.1

50.8

Ordering Information

3.0

3/140

TransparentHeat Shrinkable Tubing

TF34 Flexible & Transparent Heat Shrinkable Tubing

Protects wire and cable markers subject to abuse, while permitting inspectability of each item covered. Protects electronic components while permitting their identification and inspection.

Features and Benefits

• Transparent, flexible polyolefin tubing• Protects identification marking perfectly• Few sizes cover a wide range of diameters allowing

reduced inventory• Halogen free

TF34 Transparent tubing with 3:1 shrink ratio allowing for a wider range of Industry.

Heat shrinkable tubing 3:1

Material

Colour

Shrink Ratio

Longitudinal change after shrinkage

Minimum Shrink Temperature

Operating Temperature

Dielectric Strength

Flammability

Specification

Polyolefin, Cross-linked (PO-X)

Transparent

3:1

-5% Max.

+110°C

-55°C to +135°C

46kV/mm Not flame retarded

DEF STAN 59-97 Type 2B, SAE - AMS - DTL-23053/5 Class 2, VG 95343

Technical Data HF RoHSüü

Recov. Ø D

CodeSupplied

Ø D

TF3415

TF343

TF346

TF349

TF3412

TF3418

TF3424

TF3440

Reel Length (m)

30.0

30.0

30.0

30.0

30.0

30.0

30.0

30.0

Wall (WT) nom.

1.5

3.0

6.0

9.0

12.0

18.0

24.0

40.0

0.5

1.0

2.0

3.0

4.0

6.0

8.0

13.0

0.50

0.50

0.70

0.80

0.85

1.00

1.20

1.25

Ordering Information

All dimensions in mm. Subject to technical changes.

3.0

3/141

SpecialisedHeat Shrinkable Tubing

Material

Colour

Shrink Ratio

Longitudinal change after shrinkage

Softening Point Adhesive

Minimum Shrink Temperature

Operating Temperature

Dielectric Strength

Flammability

Specification

Polyolefin, Cross-linked (PO-X)

Black (BK)

3:1. 4:1

-10% Max.

+90°C

+120°C

-55°C to +110°C

15kV/mm according to IEC 684 P2

ASTM D2671 (outer layer only)

SAE - AMS - DTL-23053 / 4

Technical Data RoHSü

EPS-300

EPS-400

Code

EPS-300 3/1

EPS-300 6/2

EPS-300 9/3

EPS-300 12/4

EPS-300 19/6

EPS-300 24/8

EPS-300 40/13

EPS400-4/1

EPS400-8/2

EPS400-12/3

EPS400-16/4

EPS400-24/6

EPS400-32/8

Thickness ofAdhesive (TA) nom.

Recov.

Ø D

Supplied

Ø D

Wall

(WT)

nom.

0.5

0.5

0.6

0.5

0.8

1.0

1.0

0.5

0.5

0.6

0.8

0.8

1.0

3.0

6.0

9.0

12.0

19.0

24.0

40.0

4.0

8.0

12.0

16.0

24.0

32.0

1.0

2.0

3.0

4.0

6.0

8.0

13.0

1.0

2.0

3.0

4.0

6.0

8.0

1.0

1.0

1.4

1.8

2.2

2.5

2.5

1.00

1.00

1.40

1.80

2.20

2.50

Ordering Information

All dimensions in mm. Subject to technical changes.

EPS-300 and EPS-400 offer high shrink ratios and protection against humidity.

EPS-300 - 3:1. EPS-400 - 4:1

Insultite EPS-300, EPS-400 • EPS-300 - 3:1 Shrink ratio • EPS-400 - 4:1 Shrink ratio

Heat shrinkable tubing EPS seals and protects a wide variety of electrical Industries like back end connector sealing,connector-to-cable transitions and splices Features and Benefits

• Flexible, thin walled polyolefin heat shrink tubing• With co-extruded hot melt adhesive inner wall• Protects against moisture• Provides an environmental sealing of complex parts

3/142

Specialised Thick WallHeat Shrinkable Tubing

HA47 — Heavy wall adhesive lined tubing.

HA47 & HU47 Thick Wall Heat Shrinkable Tubing up to 3.5:1 - 1 m lengths• HA47 - thick wall adhesive lined• HU47 - thick wall unlined

The toughness and wheatherability makes it well suited for exposed Industries and underground cable joints and cable terminations.

Features and Benefits

• Thick walled polyolefin adhesive-lined sleeving• Thermoplastic adhesive protects against moisture

and weathering• Used for low voltage power Industries

All dimensions in mm. Subject to technical changes.

Heat Shrinkable Tubing 3.5:1 with adhesive

Polyolefin, Cross-linked (PO-X)

-55°C to +110°C

Black (BK)

Up to 3.5:1

-10% max.

+120°C

+85°C

20kV/mm

Not flame retarded

A (VDE 0530)

Material

Operating Temperature

Colour

Shrink Ratio

Longitudinal change after shrinkage

Minimum Shrink Temp

Softening Point Adhesive

Dielectric Strength (metric)

Flammability

Insulation class

Technical Data HF RoHSüü

Thickness ofAdhesive (TA) nom.

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

HU47 - thick wall unlined

HA47 - thick wall adhesive lined

HA479HA4713HA4719HA4733HA4745HA4751HA4768HA4785HA47105HA47130HA47160HA47180

HU479HU4713HU4719HU4733HU4745HU4751HU4768HU4785HU4790HU47130HU47160HU47180

CodeRecov.

Ø DSupplied

Ø DWall (WT)

nom.

3.0

4.0

6.0

8.0

12.0

16.0

22.0

25.0

30.0

36.0

50.0

50.0

9.0

13.0

19.0

33.0

45.0

51.0

68.0

85.0

105.0

130.0

160.0

180.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.8

2.4

2.7

3.2

4.1

4.1

4.1

4.3

4.3

4.3

4.3

4.3

3.0

4.0

6.0

8.0

12.0

16.0

22.0

25.0

30.0

36.0

50.0

50.0

9.0

13.0

19.0

33.0

45.0

51.0

68.0

85.0

90.0

130.0

160.0

180.0

1.8

2.4

2.7

3.2

4.1

4.2

4.1

4.3

4.3

4.3

4.3

4.3

Ordering Information

Please note! Not all products listedon this page may have this approval.

3.0

3.0

3/143

Heavy DutyHeat Shrinkable Tubing

All dimensions in mm. Subject to technical changes.

Polyolefin, Cross-linked (PO-X)

Black (BK)

3:1

-10% Max.

+120°C

-55°C to +110°C (IMCS-A +75°C)

20kV/mm according to IEC 684 P2

ASTM D876 (IMCS-A outer layer only)

Germanischer Lloyd, Det NorskeVeritas (IMCS F471 / IMCS-A F471)*

Material

Colour

Shrink Ratio

Longitudinal change after shrinkage

Minimum Shrink Temperature

Operating Temperature

Dielectric Strength

Flammability

Specification

Technical Data HF RoHSüü

Insultite, IMCS-A Adhesive Lined Heat Shrink Tubing

IMCS-A is an adhesive lined medium wall tubing with outstanding insulation and environmental sealing properties. The product is UV resistant and has excellent mechanical properties.

Features and Benefits

• Shrink ratio minimum 3:1• Operating temperature -55°C to 110°C• Excellent impact and abrasion resistance• Excellent environmental and UV resistance• High electrical insulation properties• Colours - black• Minimum shrink temperature 120°C IMCSA heat shrinking tubing with a high (up to 4:1) shrink ratio.

Heat shrinkable tubing 3:1

Recov.Ø D

IMCS-AAdhesive

SuppliedØ D

Wall (WT)nom.

Wall(WT)

Thickness of

Adhesive (TA) nom.

IMCS-A12

IMCS-A19

IMCS-A27

IMCS-A32

IMCS-A38

IMCS-A50

IMCS-A70

IMCS-A90

IMCS-A120

0.7

0.8

0.8

0.8

0.8

0.8

0.8

0.8

0.8

12.0

19.0

27.0

32.0

38.0

50.0

70.0

90.0

120.0

2.7

3.3

3.3

3.3

3.3

3.3

3.3

3.3

3.3

3.0

6.0

8.0

7.5

12.0

18.0

26.0

36.0

40.0

2.0

2.5

2.5

2.5

2.5

2.5

2.5

2.5

2.5

Ordering Information

3/144

SpecialisedHeat Shrinkable Tubing

Thin wall PST-HT tubing with a boot.

Insultite PST-H Elastomeric Tubing

Features and Benefits

PST-H is a flexible, high performance elastomeric tubing. This tubing is used in aerospace, defence, railway and automotive Industries. PST-H is resistant to diesel, aviation and hydraulic fluids. It provides reliable protection against abrasion and mechanical damage and is suitable for protecting cables and wire harnesses.

Insultite PST-HT

PST-HT is used for long-term protection of cables and wire harnesses in military equipment, motorsport and aviation.

Features and Benefits

The benefit of the thin walled and very flexible PST-HT tubing is in its lighter weight. It is used in areas where weight is a key factor, for example in aerospace Industries.

PST-H, PST-HT

Elastomer cross-linked (PES)

Black (BK)

2:1

-10% Max.

+135°C

-75°C to +150°C

20kV/mm according to IEC 684 P2

Self extinguishing

DEF STAN 59-97/3, VG 95343

Material

Colour

Shrink Ratio

Longitudinal change after shrinkage

Minimum Shrink Temperature

Operating Temperature

Dielectric Strength

Flammability

Specification

Technical Data RoHSü

Insultite PST-H

Insultite PST-HT

Wall (WT)nom.

Reel Length (M)Code SuppliedØ D

Designationas per VG-Norm

Recov.Ø D

PST-H 3.2/1.6

PST-H 4.8/2.4

PST-H 6.4/3.2

PST-H 9.5/4.8

PST-H 12.7/6.4

PST-H 19.0/9.5

PST-H 25.4/12.7

PST-H 38.0/19.0

PST-H 51.0/25.4

PST-H 76.0/38.0

PST-H 102.0/51.0

PST-HT 3.2/1.6

PST-HT 4.8/2.4

PST-HT 6.4/3.2

PST-HT 9.5/4.8

PST-HT 12.7/6.4

PST-HT 19.0/9.5

PST-HT 25.4/12.7

PST-HT 38.0/19.0

PST-HT 51.0/25.4

VG 95343 T 05 D 001 A

VG 95343 T 05 D 002 A

VG 95343 T 05 D 003 A

VG 95343 T 05 D 004 A

VG 95343 T 05 D 005 A

VG 95343 T 05 D 006 A

VG 95343 T 05 D 007 A

VG 95343 T 05 D 008 A

VG 95343 T 05 D 009 A

VG 95343 T 05 D 010 A

VG 95343 T 05 D 011 A

VG 95343 T 05 D 013 A

VG 95343 T 05 D 014 A

VG 95343 T 05 D 015 A

VG 95343 T 05 D 016 A

VG 95343 T 05 D 017 A

VG 95343 T 05 D 018 A

VG 95343 T 05 D 019 A

VG 95343 T 05 D 020 A

VG 95343 T 05 D 022 A

3.2

4.8

6.4

9.5

12.7

19.0

25.4

38.0

51.0

76.0

102.0

3.2

4.8

6.4

9.5

12.7

19.0

25.4

38.0

51.0

1.6

2.4

3.2

4.8

6.4

9.5

12.7

19.0

25.4

38.0

51.0

1.6

2.4

3.2

4.8

6.4

9.5

12.7

19.0

25.4

1.6

2.4

3.2

4.8

6.4

9.5

12.7

19.0

25.4

38.0

51.0

1.6

2.4

3.2

4.8

6.4

9.5

12.7

19.0

25.4

400.0

300.0

300.0

100.0

100.0

50.0

50.0

30.0

20.0

15.0

15.0

400.0

300.0

300.0

150.0

100.0

50.0

50.0

30.0

20.0

Ordering Information

3.0

All dimensions in mm. Subject to technical changes. Minimum Order Quantity applicable.

3.0

3/145

SpecialisedHeat Shrinkable Tubing

Fluoropolymer cross-linked (FPMX)

Black (BK)

2:1

-10% Max.

+175°C

-55°C to +220°C

15kV/mm according to IEC 684 P2

C (VDE 0530)

VG 95343

VG 95343

Material

Colour

Shrink Ratio

Longitudinal change after shrinkage

Minimum Shrink Temperature

Operating Temperature

Dielectric Strength

Insulation Class

Flammability

Specification

Technical Data RoHSü

Viton®-E for flexibility and protection against aggressive chemicals.

Insultite Viton®-E

Viton®-E is used for reliable protection against aggressive chemicals in high temperature environments like engine compartments and turbines. It is also used when protective tubings are required to remain flexible at low temperatures.

Features and Benefits

• High temperature resistant fluoroelastomeric heat shrink tubing

• Very good electrical, chemical and mechanical features• Resistant to many fuels, oils and lubricants• Flexible even at very low temperatures

Heat Shrinkable Tubing 2:1

All dimensions in mm. Subject to technical changes.Viton® is a registered trademark of DuPont.

CodeDesignation

as per VG-Norm Supplied

Ø DRecov.

Ø DWall (WT)

nom.Reel Length (L)

VITON®-E 3.2/1.6

VITON®-E 4.8/2.4

VITON®-E 6.4/3.2

VITON®-E 9.5/4.8

VITON®-E 12.7/6.4

VITON®-E 19.0/9.5

VITON®-E 25.4/12.7

VITON®-E 38.0/19.0

VITON®-E 50.8/25.4

50.0

50.0

50.0

25.0

25.0

25.0

25.0

15.0

15.0

VG 95343 T 05 E 001 A

VG 95343 T 05 E 002 A

VG 95343 T 05 E 003 A

VG 95343 T 05 E 004 A

VG 95343 T 05 E 005 A

VG 95343 T 05 E 006 A

VG 95343 T 05 E 007 A

VG 95343 T 05 E 008 A

VG 95343 T 05 E 009 A

0.7

0.8

0.9

1.0

1.2

1.4

1.8

2.4

2.8

3.2

4.8

6.4

9.5

12.7

19.0

25.4

38.0

50.8

3.2

4.8

6.4

9.5

12.7

19.0

25.4

38.0

50.8

Ordering Information

3/146

SpecialisedHeat Shrinkable Tubing

KYNAR® used in a chemical laboratory.

Insultite KYNAR®

Typical Industries of this translucent tubing are where high-temperature performance is required. Also very suitable for Industries that ask for visual inspection of covered components, or if a low friction surface is needed. KYNAR® is also used as oil stop for energy cables. This thin walled, translucent heat shrink tubing is often used for chemical Industries.

Features and Benefits

• Semi-rigid heat shrinkable tubing made of PVDF• Thin walled and tough• For higher temperature Industries• Very good mechanical strength, abrasion resistance and

chemical resistance• Meets various industrial standards• Self extinguishing, UL 224 VW1 listed

Heat Shrinkable Tubing 2:1

Material

Colour

Shrink Ratio

Longitudinal change after shrinkage

Minimum Shrink Temperature

Operating Temperature

Dielectric Strength

Flammability

Specification

Polyvinylidene Fluoride (PVDF)

Transparent (CL)

2:1

-5% Max.

+175°C

-55°C to +175°C

30kV/mm according to IEC 684 P2

UL224 VW1

DEF STAN 59-97/3, UL224 150°C 600V VW-1. MIL-DTL-23053 / 8

Technical Data RoHSü

All dimensions in mm. Subject to technical changes.

CodeRecov.

Ø DWall (WT)

nom.Designation

as per VG-Norm Supplied

Ø D

KYNAR® 3/64

KYNAR® 1/16

KYNAR® 3/32

KYNAR® 1/8

KYNAR® 3/16

KYNAR® 1/4

KYNAR® 3/8

KYNAR® 1/2

KYNAR® 3/4

KYNAR® 1

KYNAR® 1 1/2

0.25

0.25

0.25

0.25

0.25

0.30

0.30

0.30

0.43

0.48

0.51

VG 95343 T 05 F 001 M

VG 95343 T 05 F 001 M

VG 95343 T 05 F 003 M

VG 95343 T 05 F 004 M

VG 95343 T 05 F 005 M

VG 95343 T 05 F 006 M

VG 95343 T 05 F 007 M

VG 95343 T 05 F 008 M

VG 95343 T 05 F 009 M

VG 95343 T 05 F 010 M

-

1.2

1.6

2.4

3.2

4.8

6.4

9.5

12.7

19.0

25.4

38.0

0.6

0.8

1.2

1.6

2.4

3.2

4.8

6.4

9.5

12.7

19.0

Ordering Information

3.0

3.0

3/147

High TemperatureHeat Shrinkable Tubing

TFE2-30

TFE2-28

TFE2-26

TFE2-24

TFE2-22

TFE2-20

TFE2-18

TFE2-16

TFE2-14

TFE2-12

TFE2-10

TFE2-8

TFE2-6

TFE2-4

TFE2-2

TFE2-0

TFE4-5/64

TFE4-1/8

TFE4-1/4

TFE4-3/8

TFE4-1/2

TFE4-5/8

TFE4-3/4

TFE4-1

TFE4-1 1/4

CodeLength

(M)Wall (WT)

nom.Supplied

Ø DRecov.

Ø D

1.22

1.22

1.22

1.22

1.22

1.22

1.22

1.22

1.22

1.22

1.22

1.22

1.22

1.22

1.22

1.22

1.22

1.22

1.22

1.22

1.22

1.22

1.22

1.22

1.22

0.86

0.96

1.17

1.27

1.39

1.52

1.93

2.36

3.05

3.81

4.85

6.10

7.67

9.4

10.92

11.94

1.98

3.17

6.35

9.52

12.7

15.87

19.05

25.4

31.75

0.38

0.46

0.56

0.69

0.82

0.99

1.25

1.55

1.83

2.26

2.85

3.58

4.52

5.69

7.06

8.81

0.64

0.94

1.60

2.44

3.66

4.52

5.69

7.06

8.82

0.23

0.23

0.23

0.25

0.25

0.30

0.30

0.30

0.30

0.30

0.30

0.38

0.38

0.38

0.38

0.38

0.22

0.25

0.30

0.30

0.38

0.38

0.38

0.38

0.38

Ordering Information

All dimensions in mm. Subject to technical changes.

Material

Shrink Ratio

Longitudinal change after shrinkage

Minimum Shrink Temperature

Operating Temperature

Dielectric Strength

Flammability

Specification

Polytetrafluoroethylene (PTFE)

2:1. 4:1

-20% Max.

+330°C

-70°C to +260°C

40kV/mm according to DIN 53481

Non burning

SAE - AMS - DTL-23053 / 12,MIL-DTL-23053 / 12

Technical Data RoHSü

TFE is available in either 2:1 or 4:1 shrink ratios.

TFE2 & TFE4 Heat Shrinkable Tubing• TFE2 - 2:1 • TFE4 - 4:1

TFE is ideal for high temperature Industries, when resistance to aggressive fluids is required or a very thin walled tubing is needed, for example in pH-measuring instruments. TFE tubing is also used to reduce movement due to friction, covering cylinders for example.

Features and Benefits

• PTFE heat shrink tubing• Very high temperature resistance• Extra thin wall translucent tubing• High abrasion resistance and good resistance against

aggressive chemicals• Available in either 2:1 (TFE2) or 4:1 (TFE4) shrink ratios

TFE2- 2:1. TFE4 - 4:1

3/148

Flame RetardantHeat Shrinkable Tubing

Code

TR27 32

TR27 48

TR27 64

TR27 95

TR27 127

TR27 191

TR27 254

TR27 381

TR27 508

Supplied Ø D

Wall (WT) nom.

0.51

0.51

0.64

0.64

0.64

0.76

0.89

1.02

1.14

Reel Length (m)

Recov. Ø D

150.0

60.0

60.0

60.0

60.0

60.0

60.0

60.0

60.0

3.2

4.8

6.4

9.5

12.7

19.1

25.4

38.1

50.8

1.6

2.4

3.2

4.8

6.4

9.5

12.7

19.1

25.4

Ordering Information

All dimensions in mm. Subject to technical changes.

TR27 2:1 Flame Retardant Heat Shrinkable Tubing

TR27 is used in Industries where toxic emissions involved in a fire must be minimised, e.g. heavily populated buildings or safety sensitive areas like tunnels, hospitals, schools, theatres, mass transit vehicles and computer centres.

Features and Benefits

• Thin walled, flexible polyolefin tubing• Optional available with adhesive or as thick walled version

(SR27)• Halogen free and excellent flame-retardant properties• Meets various industrial standards

TR27 is ideal for safety sensitive areas.

Heat Shrinkable Tubing 2:1

Material

Colour

Shrink Ratio

Longitudinal change after shrinkage

Minimum Shrink Temperature

Operating Temperature

Dielectric Strength

Flammability

Specification

Polyolefin, cross-linked (PO-X)

Black (BK)

2:1. 4:1

+5%/-10% Max.

+115°C

-40°C to +105°C

15kV/mm according to IEC 60684 P2

Limited fire hazard, Halogen free, low generation of toxic gases and corrosive acid, Low smoke generation

CEN TS 45545-2: HL3, DEF STAN 59-97 Type 8, LUL Engineering Standard E1042:A6

Technical Data HF RoHS LFHü üü

3.0

3.0

3/149

Heat GunsHeat Shrinkable Tubing

HL1920E - DIY Steinel Heat Gun

• Output: 2000W• Operation hours: 600• Temperature rating 80°C - 600°C• Airflow rate: 150-500l/min• Protection class (without earth terminal): II

HG2120E - Professional Steinel Heat Gun

• Output: 2200W• Operation hours: 750• Temperature rating 80°C - 630°C• Airflow rate: 150-500l/min• Thermal cutout• Protection class (without earth terminal): II

HL1620S - DIY Steinel Heat Gun

• Output: 1600W• Operation hours: 600• Temperature rating 300°C or 500°C• Airflow rate: 240 or 450l/min• Protection class (without earth terminal): II

3.0

3/150

Optional Heat Gun AccessoriesHeat Shrinkable Tubing

Optional Heat Gun Accessories

NOZREF Reflector Nozzle

• Perfect for soldering pipes, fitting shrink tubing, thawing frozen pipes and bending pipes

NOZSUR50 50mm Surface Nozzle

• Evenly spreads air over a wide area. Ideal for evenly drying filler or stripping paint and removing films

NOZRED9 9mm Reduction Nozzle

• Delivers hot air with pinpoint precision for desoldering and welding plastics with welding nozzle

Heat Shrinkable Moulded ShapesHeat Shrinkable Tubing

3.5 Heat Shrinkable Moulded Shapes

Heat Shrinkable Moulded Shapes 152

Material Overview 153

Heat Shrinkable Moulded Shapes 154-164

Heat Shrinkable Moulded Shape Profiles Available on Request 165

3/151

3.0

3.0

3/152

Heat Shrinkable Moulded ShapesHeat Shrinkable Tubing

Bulbous Boots Product Overview

Bulbous Boots Product Overview

Bottle Shapes*

Helashrink 150 Series,

with rib, VG

4-Way Outlet Shapes

Helashrink 400 Series,

in line, low voltage

Bottle Shapes

Helashrink 100 Series,

without rib

5-Way Outlet Shapes*

Helashrink 500 Series,

in line, low voltage

Bottle Shapes

Helashrink 100 Series,

with rib, MIL

6-Way Outlet Shapes*

Helashrink 600 Series,

in line, low voltage

Long Outlet Shape*

Helashrink 130 Series,

with rib, low profile, VG

Right-Angle Shapes

Helashrink 1100 Series,

with rib, VG

Bottle Shapes*

Helashrink 170 Series,

with rib, VG

Right-Angle Shapes*

Helashrink 1100 Series,

without rib

2-Way Outlet Shapes*

Helashrink 200 Series,

low profile

Right-Angle Shapes

Helashrink 1100 Series,

with rib, MIL

Bottle Shapes*

Helashrink 190 Series,

with external ribs, VG

Right-Angle Shapes

Helashrink 1100 Series,

with rib, low profile,

VG style/MIL style

2-Way Outlet Shapes

Helashrink 200 Series, VG

Right-Angle Shapes

Helashrink 1100 Series,

with rib, low profile,

high ratio, VG

2-Way Outlet Shapes

Helashrink 200 Series,

in line, low voltage

T-Shapes

Helashrink 1200 Series, VG

3-Way Outlet Shapes

Helashrink 300 Series, VG

T-Shapes*

Helashrink 1200 Series,

Offset, VG

3-Way Outlet Shapes

Helashrink 300 Series,

in line, low voltage

Angled T-Shapes

Helashrink 1300 Series,

30° & 45° angle, VG

4-Way Outlet Shapes

Helashrink 400 Series, VG

Heat Shrink Moulded Shape Profiles

All dimensions in mm. Subject to technical changes.* Other moulded shape profiles available on request.

3.0

3/153

Material OverviewHeat Shrinkable Tubing

Material

Colour

Minimum Shrink Temperature (Metric)

OperatingTemperature

Dielectric Strength (metric)

Flexibility

Flammability

Specification

-9

* Standard material.Other materials available on request.

Code G* B7 H B8

Modified elastomer blend

Black (BK)

+135°C

-55°C to +120°C

20kV/mm to ASTMD2671

Flexible

ASTM D635

SCX15112

Polyester elastomercross-linked (PEEX)

Black (BK)

+135°C

-75°C to +150°C

14kV/mm accordingto ASTM D2671

Semi rigid

VG 95343

VG 95343 Part 6, 7,8, 9 DEF STAN 59-97 / 3

Polyolefin, Chemicallycross linked (POX)

Black (BK)

+135°C

-55°C to +70°C

15kV/mm

Semi rigid

ASTM D635

ESI 09/11Det NorskeVeritas

Polyolefin, Chemicallycross linked (POX)

Black (BK)

+135°C

-55°C to +135°C ,Intermittent +225°C

16kV/mm

Semi rigid

ASTM D635

MIL-I-81765/1 Type 1DEF STAN 59-97 / 3

Polyolefin,cross linked (POX)

Black (BK)

+135°C

-55°C to +105°C

15kV/mm

Flexible

VG 95343

VG 95343 part 29, 30 NAVSEA

5617649DEF STAN 59-97/3

Material Specifications RoHSü RoHSü RoHSüRoHSüRoHSü LFHü

Material Overview

HellermannTyton offers a wide range of moulded parts. The extensive product line includes low profile, bulbous and lipped types for use on circular and D-type connectors as well as complex multiway transitions.

They can be sealed with our special adhesives and encapsulants to ensure the proper degree of mechanical support, strain relief and environmental protection.

A range of specially formulated materials is available to meet a variety of performance requirements.

3.0

3/154

Heat Shrinkable Moulded ShapesHeat Shrinkable Tubing

Material

Industry

Softening Point

OperatingTemperature

Peel strength

Water absorbtion at 25°C

Solvent resistance

Specification

Description W24

RoHSü RoHSü RoHSü RoHSüAdhesive Specifications

W21WM250

Modified polymidehot melt adhesive

High temperature hotmelt adhesive

120°C to ASTM E28

-55°C to +120°C

VG95343 Pt 14

ASTM D570

Very good undermost conditions especially saline

VG 95-343 part 29

Factory appliedhot melt adhesive

Good general purposeadhesive

95°C to ASTM E28

-50°C to +80°C

VG95343 Pt 14

ASTM D570

Fair under splashconditions

Def. Stan 59-97 issue 3

One part high performance epoxy

Specially modified tomeet military cable and

harness needs

N/A

-70°C to +200°C

VG95343 Pt 14

ASTM D570

Very good to excellentunder most conditions

VG 95-343 part 29Def. Stan 59-97 issue 3

W8

Hot melt adhesive

High temperature hotmelt that compliments

H material

110°C to ASTM E28

-55°C to +105°C

VG95343 Pt 14

ASTM D570

Fair under splashconditions

Def. Stan 59-97 issue 3

Data sheets are available for the full range of adhesives and materials.

Order Example

Type:

XXX(X) - X(X) - X XXX (XX)

Adhesive

Material

Size

Series

Example:

152 - 41 - HW21

Adhesive HW21 (LFH) Material

Short Version

Series 100

Adhesives for moulded parts

The newly developed W24 epoxide resin adhesive can be used in the temperature range from -75°C to +200°C. The moulded parts are factory coated with W24 adhesive In combination with the material G, i.e. as GW24, the adhesive has approval to VG 95343, Part 18 and Part 19.

The V9500 two-component adhesive with approval to VG 95343 Part 15 can be supplied in 50g cartridges for the practical V9500 dispensing guns (see page 3/43).

Lining with hot melt and epoxy adhesive for our range of materials on request. The LFH material H is lined with W21 (LFH) hot melt adhesive.

Adhesives and mastics

B8 Material is coated with Hot Melt Adhesive (WM250) as standard, and is applied either as a spiral code W2, or smooth coat code W. Alternatively shapes are coated with Black Mastic code WM252.

M1 and K, are coated with Anti-track Mastic (Red), code WM253.

3.0

3/155

Heat Shrinkable Moulded ShapesHeat Shrinkable Tubing

Recovered 199-4-G, VG style shape for small audio connectors with external ribs for improved grip.

150 series boot recovered on to connector.

Helashrink 100 Series

Straight plug-and-socket connector terminal casing. This style is used in conjunction with circular grooved adaptor, providing protection against environmental stresses. The inside lip has been designed to provide extra reinforced stress relief. Special fitting 199-4-G for audio plugs has external ribs for an improved grip.

T ± 20%

113-1-G

113-4-G

152-41-G

152-42-G

153-41-G

153-42-G

154-41-G

154-42-G

155-41-G

155-42-G

156-41-G

156-42-G

157-41-G

157-42-G

157-43-G

158-41-G

158-42-G

158-43-G

159-41-G

159-42-G

159-43-G

160-41-G

160-42-G

160-43-G

199-4-G

Ordering Information

J b

H mina

J a

CodeH max

bP ± 10%

10.7

10.7

24.0

24.0

25.0

25.0

30.0

30.0

31.0

31.0

36.0

36.0

43.0

43.0

43.0

60.0

60.0

60.0

66.0

66.0

66.0

82.0

82.0

82.0

17.5

R ± 10% S nomHW ± 20%

JW ± 20% V ± 10%

7.9

7.9

10.5

10.5

14.0

14.0

14.0

14.0

18.0

10.5

22.5

22.5

28.0

28.0

28.0

35.0

35.0

35.0

45.0

45.0

45.0

58.0

58.0

58.0

14.0

4.6

4.6

24.0

24.0

9.0

9.0

30.0

30.0

31.0

31.0

36.0

36.0

43.0

43.0

43.0

60.0

60.0

60.0

66.0

66.0

66.0

82.0

82.0

82.0

7.0

2.0

2.0

6.0

6.0

3.5

3.5

6.0

6.0

7.0

7.0

8.5

8.5

10.0

10.0

10.0

16.0

16.0

16.0

17.0

17.0

17.0

27.0

27.0

27.0

4.3

25.4

25.4

26.0

38.0

40.0

55.0

43.0

55.0

47.0

67.0

60.0

80.0

60.0

79.0

99.0

90.0

110.0

130.0

130.0

150.0

171.0

137.0

158.0

213.0

70.0

14.5

14.5

9.0

21.0

13.0

28.0

20.0

32.0

15.0

35.0

22.0

42.0

21.0

41.0

61.0

32.0

52.0

72.0

50.0

70.0

90.0

37.0

58.0

113.0

35.0

-

4.6

10.0

10.0

16.0

16.0

1.0

13.0

18.0

18.0

20.0

20.0

20.0

20.0

20.0

38.0

38.0

38.0

50.0

50.0

50.0

62.0

62.0

62.0

20.0

1.3

1.3

1.6

1.6

1.8

1.8

1.8

1.8

1.8

1.8

2.0

2.0

2.2

2.2

2.2

3.2

3.2

3.2

3.8

3.8

3.8

3.8

3.8

3.8

1.8

1.0

1.0

0.5

0.5

0.5

0.5

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.5

1.5

1.5

2.0

2.0

2.0

3.8

3.8

3.8

0.5

-

3.0

3.0

3.0

3.0

3.0

3.0

3.0

3.0

3.0

3.0

3.0

3.0

3.0

3.0

3.0

3.0

3.0

3.0

3.0

3.0

3.0

3.0

3.0

1.5

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.7

1.7

1.7

1.7

1.7

1.7

2.0

2.0

2.0

2.0

2.0

2.0

1.0

All dimensions in mm. Subject to technical changes. a As supplied b Recovered

These moulded shapes are also available in various materials from our range, e.g. B7, H, L and J on request. In addition, the moulded shapes can also be supplied with an inner coating from our range of hot-melt and epoxy adhesives, eg, W24, W1. W8 and WM250.

3.0

3/156

Heat Shrinkable Moulded ShapesHeat Shrinkable Tubing

135-1-G as supplied / fully recovered.

177-1-G as supplied / fully recovered.

Helashrink 100 Series

Straight plug-and-socket connector terminal casing has protection against environmental stresses for circular plug connectors, according to VG. The inside lip is usedfor a reinforced stress relief.

Code

129-1-G

130-1-G

131-1-G

132-1-G

133-1-G

134-1-G

135-1-G

136-1-G

138-1-G

T ±10%

V ±10%

Ordering Information

J b

H mina

J a

H maxb

P ± 10% = overall length

22.0

22.5

29.0

34.0

37.0

43.5

50.0

62.5

69.0

R ±10%

HW ±20%

JW ±20%

12.0

15.0

19.0

23.0

30.0

34.0

41.0

47.0

60.0

22.0

22.5

29.0

34.0

37.0

43.5

50.0

62.5

69.0

6.5

7.5

8.5

10.0

11.0

12.0

14.5

18.0

20.0

76.0

83.0

89.0

102.0

108.0

114.0

118.0

121.0

127.0

12.0

12.0

12.0

12.0

14.0

15.0

15.0

16.0

16.0

1.1

1.5

1.1

1.1

2.0

2.0

2.3

2.5

2.5

1.1

1.1

1.1

1.1

1.1

1.1

1.4

1.4

1.4

3.0

3.0

3.0

3.0

3.0

3.0

3.0

3.0

3.0

1.0

1.0

1.0

1.0

1.7

1.7

1.7

2.0

2.0

Code

176-1-G

177-1-G

178-1-G

179-1-G

187-1-G

H mina

T ±10%

V ±10%

Ordering Information

J b

J a

H maxb

P ± 10% = overall length

19.3

26.1

34.2

43.6

81.5

R ±10%

HW ±20%

JW ±20%

13.0

19.1

26.0

34.1

67.0

6.3

7.6

9.6

11.4

81.5

2.1

2.6

3.1

3.6

23.0

60.2

74.2

84.3

99.6

133.0

11.7

12.2

12.2

12.2

16.0

1.5

1.8

1.8

1.8

2.5

1.1

1.1

1.1

1.1

1.4

3.0

3.0

3.0

3.0

3.0

1.0

1.0

1.0

1.7

2.0

All dimensions in mm. Subject to technical changes. a As supplied b Recovered

These moulded shapes are also available in various materials from our range, e.g. B7, H, L and J on request. In addition, the moulded shapes can also be supplied with an inner coating from our range of hot-melt and epoxy adhesives, eg, W24, W1. W8 and WM250.

All dimensions in mm. Subject to technical changes. a As supplied b Recovered

These moulded shapes are also available in various materials from our range, e.g. B7, H, L and J on request. In addition, the moulded shapes can also be supplied with an inner coating from our range of hot-melt and epoxy adhesives, eg, W24, W1. W8 and WM250.

3.0

3/157

Heat Shrinkable Moulded ShapesHeat Shrinkable Tubing

Space saving right-angle shapes used here in a military industry.

Helashrink 1100 Series

Right-angle, VG style shape with rib. This style provides connector cable strain relief and can be installed directly onto connector rear thread.

1152-4-G recovered on to a connector.

1108-1-G

1108-4-G

1152-4-G

1154-4-G

1155-4-G

1155-4-G

1157-4-G

1158-4-G

1159-4-G

1160-4-G

CodeV ±10%

Ordering Information

J b

H mina

J a

H maxb

P ±10%

16.5

16.5

24.0

30.0

31.0

36.0

43.0

60.0

66.0

82.0

R ±10%

S ±10%

JO ±10%

HW ±20%

JW ±20%

T ±10%

7.9

7.9

10.5

14.5

18.0

22.5

28.5

35.0

45.0

61.0

16.5

16.5

24.0

30.0

31.0

36.0

43.0

60.0

66.0

82.0

3.8

3.8

6.0

6.0

7.0

8.5

10.0

16.0

17.0

25.0

17.3

17.3

26.0

32.0

40.0

46.0

55.0

80.0

108.0

118.0

20.1

20.1

25.0

27.0

31.0

38.0

45.0

54.0

68.0

84.0

15.2

15.2

19.0

20.0

31.0

26.0

30.0

35.0

42.0

52.0

4.1

4.1

10.0

12.0

15.0

15.0

16.0

30.0

51.0

39.0

1.0

1.0

1.3

1.5

1.8

1.8

2.0

3.3

3.8

4.0

1.0

1.0

0.5

0.8

1.0

1.0

1.0

1.5

2.0

4.0

-

3.0

3.0

3.0

3.0

3.0

3.0

3.0

3.0

3.0

-

1.0

1.0

1.0

1.0

1.0

1.7

1.7

2.0

2.0

All dimensions in mm. Subject to technical changes. a As supplied b Recovered

These moulded shapes are also available in various materials from our range, e.g. B7, H, L and J on request. In addition, the moulded shapes can also be supplied with an inner coating from our range of hot-melt and epoxy adhesives, eg, W24, W1. W8 and WM250.

3.0

3/158

Heat Shrinkable Moulded ShapesHeat Shrinkable Tubing

Code

1133-1-G

1134-1-G

1135-1-G

1136-1-G

1141-1-G

Ordering Information

J b

H mina

J a

H maxb

P ± 10% = overall length

19.0

26.0

34.0

43.5

82.0

R ±10%

HW ±20%

JW ±20%

V ±10%

T ±10%

13.0

19.0

26.0

34.0

67.0

6.0

7.5

9.5

11.5

82.0

2.0

2.5

3.0

3.5

23.0

45.0

67.0

81.0

116.0

140.0

16.0

18.0

19.0

21.0

45

1.5

1.8

1.8

1.8

2.5

1.1

1.1

1.1

1.1

1.4

3.0

3.0

3.0

3.0

3.0

1.0

1.0

1.0

1.7

2.0

All dimensions in mm. Subject to technical changes. a As supplied b Recovered

These moulded shapes are also available in various materials from our range, e.g. B7, H, L and J on request. In addition, the moulded shapes can also be supplied with an inner coating from our range of hot-melt and epoxy adhesives, eg, W24, W1. W8 and WM250.

All dimensions in mm. Subject to technical changes. a As supplied b Recovered

These moulded shapes are also available in various materials from our range, e.g. B7, H, L and J on request. In addition, the moulded shapes can also be supplied with an inner coating from our range of hot-melt and epoxy adhesives, eg, W24, W1. W8 and WM250.

Helashrink 1100 Series

Right-angle, low profile shape with rib, VG/ Mil style, often used on airborne harnesses to achieve low profile, compact strain relief and mechanical protection.

The photo below shows a shape style that provides connector strain relief and is used in Industries of partially loaded connectors with small cable diameters.

1123-1-G Supplied and recovered.

1135-1-G Supplied and recovered.

H mina

V ±10%

1121-1-G

1122-1-G

1123-1-G

1124-1-G

1125-1-G

1126-1-G

1127-1-G

1128-1-G

1129-1-G

Ordering Information

J b

J a

CodeH max

bP ± 10%

= overall length

22.0

25.5

29.0

34.0

37.0

43.5

50.0

62.5

69.0

R ±10%

HW ±20%

JW ±30%

T ±10%

12.0

15.0

19.0

23.0

30.0

34.0

41.5

47.0

60.0

22.0

25.5

29.0

34.0

37.0

43.5

50.0

62.5

69.0

6.5

7.5

8.5

10.0

11.0

12.0

14.5

18.0

20.0

70.0

79.0

89.0

102.0

108.0

121.0

132.0

133.0

137.0

19.0

20.0

21.0

22.0

24.0

27.0

30.0

33.0

35.5

1.5

1.0

1.8

1.8

2.0

2.0

2.3

2.5

2.5

1.1

1.1

1.1

1.1

1.1

1.1

1.4

1.4

1.4

3.0

3.0

3.0

3.0

3.0

3.0

3.0

3.0

3.0

1.0

1.0

1.0

1.0

1.7

1.7

1.7

2.0

2.0

3.0

3/159

Heat Shrinkable Moulded ShapesHeat Shrinkable Tubing

All dimensions in mm. Subject to technical changes. a As supplied b Recovered

These moulded shapes are also available in various materials from our range, e.g. B7, H, L and J on request. In addition, the moulded shapes can also be supplied with an inner coating from our range of hot-melt and epoxy adhesives, eg, W24, W1. W8 and WM250.

Two-way outlet shape 203-1-G assupplied and recovered.

Helashrink 200 Series

Branching parts are used for easy, time-saving insulation of the branch point of a cable where it is split into single wires. Branching parts with hot-melt adhesive also serve to relieve the mechanical tension in cable harnesses.

-

2.5

3.0

1.5

4.5

2.5

2.3

JW/KW ±30%

201-1-G

203-1-G

204-1-G

206-1-G

211-1-G

212-1-G

213-1-G

Ordering Information

J/Kb

H mina

J/K a

CodeH max

bP ± 10%

= overall length

19.0

27.0

39.0

13.0

56.0

14.5

17.3

R ±10%

HW ±30% b

9.4

12.0

18.0

6.0

26.0

8.0

7.9

6.4

13.0

27.0

7.0

27.0

8.5

11.1

14.0

6.0

12.0

3.0

13.0

5.5

7.9

50.8

80.0

131.0

41.0

173.0

136.0

140.0

30.5

43.0

81.0

19.0

94.0

63.0

64.0

-

1.5

2.5

1.0

2.5

2.0

1.0

All dimensions in mm. Subject to technical changes. a As supplied b Recovered

These moulded shapes are also available in various materials from our range, e.g. B7, H, L and J on request. In addition, the moulded shapes can also be supplied with an inner coating from our range of hot-melt and epoxy adhesives, eg, W24, W1. W8 and WM250.

304-1-G as supplied and fully recovered.

300 Series Breakout Boots

Branching parts are used for easy, time-saving insulation of the branch point of a cable where it is split into single wires. Branching parts with hot-melt adhesive also serve to relieve the mechanical tension in cable harnesses.

CodeJW/KW ±

30%

306-1-G

310-1-G

311-1-G

Ordering Information

J/K/Lmax

H mina

J/K/L min

H maxb

P ± 10% = overall length

13.0

38.5

55.5

R ±10%

HW ±30% b

JW/KW ±30%

6.5

19.0

25.5

6.5

19.0

27.0

3.5

10.0

12.5

46.0

135.0

192.0

25.0

74.0

103.0

1.5

3.0

4.5

2.0

3.0

1.0

21.0

62.0

89.0

3.0

3/160

Heat Shrinkable Moulded ShapesHeat Shrinkable Tubing

All dimensions in mm. Subject to technical changes. a As supplied b Recovered

These moulded shapes are also available in various materials from our range, e.g. B7, H, L and J on request. In addition, the moulded shapes can also be supplied with an inner coating from our range of hot-melt and epoxy adhesives, eg, W24, W1. W8 and WM250.

All dimensions in mm. Subject to technical changes. a As supplied b Recovered

These moulded shapes are also available in various materials from our range, e.g. B7, H, L and J on request. In addition, the moulded shapes can also be supplied with an inner coating from our range of hot-melt and epoxy adhesives, eg, W24, W1. W8 and WM250.

400 Series Breakout Boots

Branching parts are used for easy, time saving insulation of the branch point of a cable where it is split into single wires. Adhesive lined branching parts also serve to relieve the mechanical tension in cable harnesses.

403-1-G as supplied and recovered.

Moulded shape 1202-1-G.

Helashrink 1200 Series

90° (right angled) Transition parts (T-joints) are used for a simple time-saving insulation of the branch point of a cable, where it is split into single wires. Adhesive lined T-joints also serve to relieve the mechanical tension in cable harnesses.

J/K/L/ Nb

S ±10%

H mina

J/K/L/ N a

CodeH max

b

P ± 15% = overall length

R ±10%

HW ±30% b

JW ±30%

T ±10%

403-1-G

413-1-G

Ordering Information

27.0

38.5

13.0

19.0

13.0

19.0

7.0

10.0

102.0

150.0

52.0

72.0

1.5

1.8

1.5

1.0

45.0

65.0

49.0

75.0

1201-1-G

1203-1-G

1204-1-G

1205-1-G

1206-1-G

1207-1-G

1209-1-G

1216-1-G

Ordering Information

J b

H mina

J a

CodeH max

bP ± 10%

= overall length

17.7

13.2

13.0

17.7

6.6

26.9

27.0

33.0

R ±10%

S ±10%

KW ±20% b

HW ±20%

JW ±20%

8.9

6.0

7.5

8.9

3.0

12.4

12.4

13.0

17.7

13.2

6.5

17.1

6.6

26.9

27.0

16.5

8.9

6.0

4.0

8.9

3.0

12.4

12.4

6.5

5.1

3.0

4.0

3.8

3.0

12.4

6.0

6.5

23.6

26.0

33.0

25.4

14.7

55.9

54.0

54.0

23.6

19.3

19.3

25.4

14.7

55.9

38.6

38.5

1.5

1.5

1.5

1.5

1.0

2.5

2.5

2.5

1.5

1.5

1.0

1.5

1.0

2.5

2.5

1.5

K a

K b

10.1

6.5

6.5

7.6

6.6

26.9

13.2

16.5

47.5

52.0

56.0

50.8

29.7

120.1

108.0

97.0

1.0

1.0

1.0

1.0

1.0

2.5

1.5

1.5

3.0

3/161

Heat Shrinkable Moulded ShapesHeat Shrinkable Tubing

All dimensions in mm. Subject to technical changes. a As supplied b Recovered

These moulded shapes are also available in various materials from our range, e.g. B7, H, L and J on request. In addition, the moulded shapes can also be supplied with an inner coating from our range of hot-melt and epoxy adhesives, eg, W24, W1. W8 and WM250.

All dimensions in mm. Subject to technical changes. a As supplied b Recovered

These moulded shapes are also available in various materials from our range, e.g. B7, H, L and J on request. In addition, the moulded shapes can also be supplied with an inner coating from our range of hot-melt and epoxy adhesives, eg, W24, W1. W8 and WM250.

Angled T shape 1303-1-G as supplied and recovered.

Angled T shape 1306-1-G as supplied and recovered.

Helashrink 1300 Series

45° Transition parts (Y-joints) are used for a simple time saving insulation of the branch point of a cable where it is divided into single wires. Y-joints with hot-melt adhesive also serve to relieve the mechanical tension in cable harnesses.

1.5

2.5

1.5

2.5

1301-1-G

1302-1-G

1303-1-G

1311-1-G

Ordering Information

J b

H mina

J a

CodeH max

bP ± 10%

= overall length

13.0

27.0

27.0

30.4

R ±10%

S ±10%

KW ±20% b

HW ±20%

JW ±20%

7.0

13.0

14.0

15.0

13.0

27.0

27.0

30.4

7.0

13.0

14.0

15.0

3.5

3.5

7.5

10.0

23.0

41.0

70.0

32.0

23.0

36.0

54.0

51.0

1.5

2.5

1.5

2.5

K a

K b

7.0

7.0

13.0

20.3

50.0

92.0

145.0

82.6

1.0

1.0

1.5

1.8

HW ±20%

1306-1-G

Ordering Information

J b

H mina

J a

CodeH max

bP ± 10%

= overall length

13.0

R ±10%

S ±10%

KW ±20% b

JW ±20%

6.0 6.5 3.0 3.0 23.0 21.0 1.5 1.0

K a

K b

6.5 45.0 1.0

3.0

3/162

Heat Shrinkable Moulded ShapesHeat Shrinkable Tubing

Two-component epoxy adhesive V9500.

The V9500 applicator gun guarantees the clean and precise coating of special fittings.

Two Component Epoxy Resin Adhesive V9500

This high performance, VG-approved, two part epoxy adhesive has been developed to meet the military requirements associated with heat shrinkable components for wire and cable harnesses. It has a very good resistance against most solvents and fuels, even at elevated temperatures. The two-part epoxy adhesive is available in two different packages.

When heat is applied during the shrinking of the moulded shape the two part components react, which results in a high performance bond.

V9500 Applicator Gun

The V9500 applicator gun allows for clean processing and individual metering. It is employed in conjunction with the cartridges (627-95001 or 627-95002) and the mixing nozzles.

• The V9500 has lockable cartridges • 50gms • Available with or without the processing set• Processing set consists of emery cloth, a small mixing

bowl and a wooden spatula

They can be re-used even after a lapse of several days occurs, because the closure prevents the adhesive from hardening.

All dimensions in mm. Subject to technical changes.

Description

V9500 Epoxy adhesive

V9500 Epoxy adhesive

V9500 Applicator gun

V9500 Applicator nozzle

Ordering Information

Code

Two-component adhesive incl. processing set

Two-component adhesive

Dosing gun

Mixing nozzles

Technical Data

Epoxy resins (EP)

Black (BK)

+135°C

24 hours at +25°C, 2 hours at +85°C

-75°C to +150°C

VG 95343 T15 A0001

Material

Colour

Curing Temperature°C

Curing Time

Operating Temperature

Specification

HF RoHSü

3.0

3/163

Heat Shrinkable Moulded ShapesHeat Shrinkable Tubing

The appropriate end cap for every cable diameter and cable type.

HEK Cable End Caps

Features and Benefits

End caps are used to seal cables during storage or transportation. HEK end caps can be used as an insulating cap for live LV cables (0.6/1kV), and the cap is marked with a lightning flash to indicate a live circuit. The adhesive lining provides an excellent environmental seal.

End caps can be fitted with air valves for certain pressurised cable Industries.

The high shrink ratio minimises the number of end cap sizes needed.

Industry

End caps are suitable for use on both polymeric and paper insulated, lead jacketed cables which may include aluminium or steel armouring.

Standard Range Cable Cap

Special Range Cable Cap

1612-1-B8W

1613-1-B8W

1614-1-B8W2

1615-1-B8W2

1615-2-B8W2

1617-1-B8W2

1616-1-B8W2

1616-7-B8W

1618-1-B8W

1601-1-B8W

1620-1-B8W

1608-1-B8W

Ordering Information

Recomm. IndustryCode

4.0

8.0

16.0

26.0

26.0

32.0

48.0

48.0

6.0

10.0

13.0

70.0

8.0

16.0

32.0

51.0

44.0

61.0

80.0

100.0

11.0

19.0

28.0

130.0

10.0

20.0

40.0

63.0

55.0

76.0

100.0

125.0

14.0

23.8

35.0

159.0

4.0

7.5

15.0

25.0

25.0

30.0

45.0

45.0

6.0

9.4

12.7

63.5

H mina ±10%

33.5

55.3

90.0

143.0

143.0

158.0

162.0

162.0

55.3

89.0

184.0

127.0

2.0

2.3

3.0

3.3

3.3

4.0

4.0

4.0

2.3

2.0

3.3