1

HHEEAALLIINNGG

FFRREEQQUUEENNCCYY AA lliittttllee mmaannuuaall ffoorr tthhee ssooffttwwaarree ““HHeeaalliinngg FFrreeqquueennccyy””

((SSttaanndd 2277.. DDeecceemmbbeerr 22001166 –– WWee rreesseerrvvee uuss tthhee rriigghhtt ttoo mmaakkee cchhaannggeess))

In this paper, we will explain all the steps involved in the use of the

"Healing Frequency" and explain it by means of pictures. This handout

should be a little help by your first steps with the software.

Before you can start with this

manual, you should download

the free software on:

www.healingfrequency.com/en/

There you can download the

setup. As soon as the download

is finished you can start the

file „CcCreatorSetup.exe“ and

the installation begins (see

image 1 and 2).

Image 1 Image 2

2

As you can see on the images above (image 1 and 2), a normal installation

starts now. As soon as it is finished and everything is working properly,

you can start the Chipcard Creator. Please refer to page 14 - 16 of this

handout to find out which Zapper models are suitable for the “Healing

Frequency” software.

Now you can see the start screen of the Chipcard Creator (image 3). As

long as you only work with the free software and not the extensive pro

version, the following options are available to you:

Frequencies according to Dr. Clark and Dr. Rife

Frequencies according to natural health professional Alan E. Baklayan

Standard – Programs (Chipcard)

TCM – Programs (Acupuncture without needles) follows shortly and will be concluded for free with the next software update

Search for different indications

Writing on standard chipcards (with the free software version it is only possible to write on the chipcard for one time!)

Now you can search every indication, diagnosis, afflictions or keywords

you want (image 4, for example “asthma”, image 5, for example “teeth”).

Furthermore you can choose in which library you want to search (image 3,

marked red). If you only want to search in Clark – frequencies for

example make sure your check mark is placed right. These examples should

show you how to work with the software. Additionally to the different

indications there are two more symbols (image 4, marked red): With these

symbols you can either save the frequency on a standard or master

Image 3

3

chipcard, or you can read more informations about the chosen indication

(image 6).

Image 5

Image 4

4

Image 6

To use the chosen frequency with your device – for example a Diamond

Shield Zapper – you have to save them on a chipcard (regardless whether

you have chosen a chipcard you can write on one time or a master chipcard

you can write on multiple times for the pro version). For this you have

to insert an empty chipcard in your chipcard writer and put it in free

USB slot of your computer. You can read more details about this in the

following text, follow these easy steps:

To save your chosen programs and

frequencies on a chipcard you have to

use an USB – chipcard writer.

(image „Chipcard writer“)

Please make sure to insert your chipcard the right way, so that no

malfunctions can appear (image 7 and 8):

Image „Chipcard writer“

Image 7 Image 8

5

As soon as you have inserted the chipcard the right way into your

chipcard writer, you can put the device in a USB – slot of your computer.

System requirements for the software are written below:

o Computer with Windows 7 / Windows 8.1 / Windows 10

o USB slot / internet connection

If these steps are functioning without problems the screen should change

like you can see in the following picture (image 9):

Image 9

On the right side you can see now the chipcards instead of „Please insert

a chipcard“ (image 9). Right above that you can see how many frequencies

and / or programs can be written on the chipcard (see image 9 and 10 for

a free chipcard or image 11 for a chipcard with “asthma” on it for

example).

Image 10

6

Image 11

At the top of the right corner you can see

four more symbols (see image here,from left

to right) (image 9 and 11):

„New folder (edit)“ (only useable with pro version and valid license key,

otherwise it’s grey and not available for users of the free version)

„New frequency (edit)“ (only useable with pro version and valid license key,

otherwise it’s grey and not available for users of the free version)

„Save on chipcards“ (Attention, with standard chipcards the chosen frequencies

CAN NOT be changed anymore afterwards, since the standard chipcards can only

be written on one time!) With a licensed pro version and master chipcards (that

can be written on multiple times), you don’t have to worry because it can easily be changed and corrected several

times.

„Delete from chipcard“ (only useable with pro version and valid license key,

otherwise it’s grey and not available for users of the free version)

7

Use Chipcards with the Diamond Shield OR Biowave Zapper:

Before you create a chipcard it is important for you to know, which

device the chipcard will be used for – because if you have chosen one

time you can not revoke this decision.

Diamond Shield Zapper:

If the device your chipcard will be used with is part of the Diamond

Shield series, you don’t have to take further actions – you simple can

insert your chipcard in your chipcard writer and save your chosen

programs.

Biowave Zapper:

If the device your chipcard will be used with is a Biowave Zapper, you

have to format the chipcard before you save your chosen programs.

ATTENTION: As soon as the chipcard is formatted you can not revoke

this step! The chipcard can’t be used with a Diamond Shield Zapper

after formatting.

Up to this point this little manual explained how to use the free version

of the Chipcard Creator. This free version can be upgraded to a chargable

pro version. The following extensions can be used with the upgraded

version:

Frequencies according to Dr. Clark and Dr. Rife

Frequencies according to natural health professional Alan E. Baklayan

Standard – Programs (Chipcard)

TCM – Programs (Acupuncture without needles) follows shortly and will be concluded for free with the next software update

Search for different indications

Writing on standard chipcards (with the free software version it is only possible to write on the chipcard for one time Pro Version:

Writing on master chipcards (writable for multiple times)

Editing of existing programs

Changing the order of different programs

Creating new individual programs

If you want to upgrade your free standard version to the chargable pro

version (with a larger range of services), the following steps must first

be taken:

8

HHeeaalliinngg FFrreeqquueennccyy Manual „How to upgrade to your pro version“

As soon as you have downloaded the software (see image 1) from the website

www.healingfrequency.com/en/ and installed and decided to upgrade to a pro version (so you can use the

extended options and possibilities like using Master Chipcards, edit existing programs or change the order

of different programs, as well as creating your own programs) please proceed as follows:

Image 1

9

- Open your installed and free standard software version of the Chipcard Creator (image 2)

- Now click on the red marked little gearwheel besides the language flag (see image 2). A new window

will be opened (see image 3):

Image 2

Image 3

10

- You can see your individual code in the field „Current installation ID“ (image 3, marked in red)

- If you’d like to upgrade your free standard version to a chargeable version please send this ID including

your name and surname to following email address: info@healingfrequency.com

- After the successful receipt of payment you will get a confirmation email, in which you will be

informed that you are now free to use the licensed and upgraded pro version of the software. Done!

The next time you open your Chipcard Creator you can use all functions and possibilities of the Healing

Frequency pro version software

- You can confirm your licensed usage with opening the gearwheel sign again (image 3, red marked) –

now you can see your „Licensed Installation ID“ key. Congratulations!

AAtttteennttiioonn!!

Please consider, that this activation is bound to ONE computer! The installation key (and therefore the license key) is bound to one device (because the key gets automatically created for it) and can – if you used it for your home computer for example – not be used with another device of your choice (like your laptop), because the installation and license key is generated with your installed operating system and the hardware of your device. If another operation system has to be installed on the computer you use for the licensed pro version of the software – the now outdated key has to be deactivated and after the installation of your new operating system, activated again with a new license key. For this you have to proceed similar to the manual above: Send an email to info@healingfrequency.com with the outdated key, that has to be deactivated, your current installation key and you name and surname. A simple deactivation and new activation on another device (for example if you buy a new computer) is free, as long as the license key will be used for only one device.

System requirements for the software:

Computer with Windows 7 / Windows 8.1 / Windows 10 USB – port / internet connection

11

With the now activated pro version you can use way more options than with

the free version. For example you can now create master chipcards that

are multiple writable, create new folders und edit the new folders to

your liking. Furthermore different frequencies can be edited by the user

(for those examples see images 12 – 15).

Image 12

Image 13

12

Image 14

Image 15

13

Additionally important to know: you have the possibility to write

frequencies on your chipcard for your Biowave Zapper. For this step you

have to choose „Biowave“ instead of „Diamond Shield“ on the home screen

of the Chipcard Creator (image 16, marked red) (for more informations

which zappers are compatible with the “Healing Frequency” software see at

page 14 – 16):

As soon as you have chosen the Zapper brand „Biowave“ and inserted an

empty chipcard (it doesn’t matter if standard or master chipcard) into

the chipcard writer and the writer in the USB slot of your computer, the

software will ask, if the inserted chipcard should be formatted for the

Biowave (image 17).

Attention: If the chipcard has been formatted once, you CAN NOT use it

anymore for the Diamond Shield Zapper!!! Naturally, only a fraction of

the frequencies can be used on the Biowave. The full range of features is

only available with the Diamond Shield models.

Image 16

Image 17

14

WWhhiicchh ZZaappppeerrss aarree ccoommppaattiibbllee wwiitthh tthhee ““HHeeaalliinngg FFrreeqquueennccyy”” ssooffttwwaarree??

The software Healing Frequency is especially

compatible with all versions of the Diamond

Shield Zapper series, as well as Biowave

generations.

But since the Diamond Shield series is rather

new and highly developed only with this device

will every function work – therefore it is

highly recommendable to use this brand.

Compatible Zappers are:

Diamond Shield Zapper IE

Diamond Shield Crystal Zapper

Diamond Shield Biowave 42 Zapper

Diamond Shield Professional Zapper

Biowave Golden Harmony

Biowave 77

Biowave 21 LCD / Golden Stream

ZZaappppeerrss ffoorr tthhee „„HHeeaalliinngg FFrreeqquueennccyy““ ssooffttwwaarree

Different zapper brands, that are compatible with the software “Healing

Frequency”:

Two zapper brands are compatible with the new software: the Diamond Shield

series and the Biowave series. Because of its new technology and greater

service options the Diamond Shield Zapper is very recommendable, since the

Biowave is not functioning with a lot of programs and options – but this will

be steadily worked on.

Diamond Shield Zapper IE

One can use the zapper with the well being frequency

programs developed by Dr. Clark, Dr. Rife, Dr. Beck and HP

Baklayan. It can be used for regulating the Zappicator and

for Plate-Zapping. Many additional Chipcards are available.

Following programs are included in the zapper:

programs for well being

Diamond Shield

Discharge

System of harmonic oscillations by Baklayan

15

Diamond Shield Crystal Zapper

The Diamond Shield Crystal Zapper is the new and

more developed version of the Diamond Shield IE and

contains new programs and functions.

While the Diamond Shield Zapper, as the name

indicates, is a basic treatment to protect the body

from the outside against all influences as a shield

by flushing the meridians, creating a better flow,

and through the energy network of the body

readjusts healing processes, the Crystal Zapper

assigns around each acupuncture point of each

meridian all structures and the ones with which

this meridian is connected. It detoxifies this area

further and deeper.

So this is the first system in the world that

actually cleanses the body deeper yet gently on an

energetic basis.

Diamond Shield Professional Zapper

The Diamond Shield Professional Zapper is really similar to

the Diamond Shield IE. But there is one great difference:

especially for therapists, natural health professionals and

zapper professionals there is a possibility to create their

own individual programs and save them on a chipcard which can

be given to patient or use for own purposes.

Chipcards can be programmed as often as you like. These

individually created Chipcards can be used with the Diamond

Shield IE.

Diamond Shield Biowave 42 Zapper

This Zapper version is ideal for beginners and zapper

newcomers, because of its fair price and easy handling.

The simple Clark Zapper by Dr. Hulda Clark has been

successfully continued with the Biowave 42, improved and

now contains all Clark basic programs that further the

well being. You can upgrade your Biowave 42 anytime to a

Diamond Shield IE or a Diamond Shield Crystal Zapper.

Cheap but nevertheless with high quality and performance –

the Biowave 42 is perfect for testing and to get to know

the Zapper.

16

Biowave 21 LCD | Golden Stream

The standard Biowave 21 LCD is a frequency device with 10

basic programs, which can be upgraded to a Biowave Golden

Stream. The Golden Stream is the predecessor to the Biowave

Golden Harmony. It contains options like constant zapp,

programs according to Clark and TENS programs.

It is more extensive than the simple Clark Zapper and

contains frequencies according to Clark, Beck and Rife.

Biowave 77

The Biowave 77 Zapper is perfect for everyone who wants to

create their own frequency programs and furthermore want to us

all frequency chips for Biowave.

Frequency programs can be created and saved on a chip.

Additionally it contains constant zapp and Clark, Rife and Beck

programs.

Biowave Golden Harmony

The Biowave Golden Harmony is the development of the Biowave Golden

Stream with tesla inductors and 10 new frequency programs.

Of course, you can also use your software in German, if you prefer. Simply click

the flag at the top of your software (image 18, marked in red)

and select the desired language.

Image 18