122 EQUIPOTENTIAL BONDING HAKEL-TRADE industry industry HGS100 HGS100 EB +90°C -40°C ϑ +90°C -40°C ϑ IP 66 IP 66 HIGH POWER GAS DISCHARGE TUBE HGS100 and HGS100 EB are a separating high power gas discharge tubes intended for equipotential bonding of an installation parts of buildings, which are not interconnected. In case of origin of p.d. (potential diference) between those parts, the high power gas discharge tube ignites and interconnects both parts for a transient time (typical value of internal resistance at startup of HGS100 is 0,001 ÷ 0,002 Ω). Recommended installation is inside of the buildings, outdoors, in the damp rooms as well as in the subterraneous areas. For lightning protection equipotential bonding in accordance with IEC 61024-1 as well as for the use in IT - installations in accordance with IEC 60364-5-54. Gas discharge tube Gas discharge tube The length of the flexible connecting cable is 200mm and it is ended with a loop GPH12 of cross section 13mm.

HIGH POWER GAS DISCHARGE TUBE

Download PDF Report

Upload
others
View
2
Download
0

Embed Size (px)

Citation preview

122

EQUIPOTENTIAL BONDING

HAKEL-TRADE

industry

HGS100

HGS100 EB

+90°C

-40°C ϑ

+90°C

-40°C ϑ

HIGH POWER GAS DISCHARGE TUBEHGS100 and HGS100 EB are a separating high power gas discharge tubes intended for equi-potential bonding of an installation parts of buildings, which are not interconnected. In case of origin of p.d. (potential diference) between those parts, the high power gas discharge tube ignites and interconnects both parts for a transient time (typical value of internal resistance at startup of HGS100 is 0,001 ÷ 0,002 Ω).

Recommended installation is inside of the buildings, outdoors, in the damp rooms as well as in the subterraneous areas.

For lightning protection equipotential bonding in accordance with IEC 61024-1 as well as for the use in IT - installations in accordance with IEC 60364-5-54.

Gas discharge tube

The length of the flexible connecting cable is 200mm and it is ended with a loop GPH12 of cross section 13mm.

katalog_2010_vyrobky_hgs_en.indd A122katalog_2010_vyrobky_hgs_en.indd A122 17.5.2010 14:48:1017.5.2010 14:48:10

123

EQUIPOTENTIAL BONDING

HAKEL-TRADE

HIGH POWER GAS DISCHARGE TUBE HGS100 Ex - Separating high power gas discharge tube HGS100 Ex for use in explosion hazards areas. It is intended for equipotential bonding of the installation parts of buildings or technological entities which are not interconnected operationaly. In case of p.d. (potential difference) origin between those parts, the high power gas discharge tube ignites and interconnects both parts for a transient time (typical value of internal resistance at startup of HGS100 Ex is 0,001÷ 0,002Ω). Recommended installation is inside of the buildings, outdoors, in the damp rooms as well as in the subterraneous areas.

It is an explosion-proof gas discharge tube with flexible connecting cable for equipotential bonding acc. to IEC 61024-1 and also for the use in IT installations acc. to IEC 60364-5-54. It complies with EN 50014 and EN 50028 standards. It is recommended for insulated flanges and insulated screw joints bridging in cathodic protected parts of industrial technology.

HGS100 Ex

Gas discharge tube

industry

+90°C

-40°C ϑ

The length of the flexible connecting cable is 200mm and it is ended with a loop GPH12 of diameter 13mm.

katalog_2010_vyrobky_hgs_en.indd A123katalog_2010_vyrobky_hgs_en.indd A123 17.5.2010 14:48:1617.5.2010 14:48:16