Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
High-Precision High-Speed Vertical Machining Center
02 High-Precision High-Speed Vertical Machining Center
High-Precision High-Speed Vertical Machining Center
The NX Series of machines takes performance and strength to a whole new level. With its double column design and high speed spindle, it provides the best stability and rigidity possiblefor today's market demand for high-precision high- efficiency part machining.
SpindleDual face contact tooling system Designed with high-stiffness low-vibration spindleHigh-speed built-in spindle
DHCDSQ3
EOP Easy Operation Package
Automatic tool measuringsystemMeasurement of tool lengthMeasurement of tool diameterDetection of tool damage
Thermal displacementreducing functionPrecise cooling of spindlePrecise cooling of ball screw
Double coulumn structureHigh-stiffness / High-responsive feed system
Optimized solution for tool processingDSQ3 (Doosan Super Quality)DHC (Doosan Heat Control)
Graphite processing solution Graphite fine powder sealing treatment Wet / dry type chip treatment (NX 5500)
NX 4500 / 5500 / 6500 features a fully enclosed mechanical structure combined with a high-speed low-vibrationspindle, a thermal displacement reduction system and a high-speed tool processing.
03
High-Precision High-Speed Vertical Machining Center
opt.
std.
No.40(20000 r/min)
HSK-F63(30000 r/min)
2-faceContact
2-faceContact
SpindleThe precision dynamic balanced spindle of the NX Series is result of years of machining industry experience.Assures lasting performance, high-stiffness and thermal control.
NX 4500 / 5500 / 6500
Oil/Air
Spindle
30 % ReductionSpindle length
32 % IncreaseStrength
70 % ReductionCharacteristicsof vibration
High-stiffness low vibration spindleSpindle strength and stiffness has been increased whilereducing vibration through bearing optimization and spindlelength reduction.
0.1 degree control oil coolerTo minimize the bearing and motor heat a high-precision oilcooler controls the temperature to 0.1 degree.
Dual face contact tooling systemThe dual contact system offers simultaneous contactbetween the machine spindle face and the tool holderflange.
Oil air lubricationA optimal amount lubrication oil is applied by high pressureair to the bearings.
04 High-Precision High-Speed Vertical Machining Center
20000 r/min
22 kW (29.5 HP)
No.40
NX 4500/5500/6500 NX 4500/5500/6500
30000 r/min
18.5 kW (24.8 HP)
HSK-F63
Max. Spindle Speed
Spindle motor
Taper type
Std. opt.
opt.
Spindle speed (r/min)
Torque : N.m (ft-lbs) Power : kW (Hp)
300000
5 (6.7)
10 (13.4)
15 (20.1)
20 (26.8)
25 (33.5)
5.9 N.m (4.3) S2 1min
4.1 N.m (3.0) S1
13 kW (17.4) S1 Cons.
18.5 kW (24.8) S2 1min
20000100000
2.5 (1.8)
5 (3.7)
7.5 (5.5)S1 ContinuousS2 1minitue
60 (44.3)
46 (33.9)
31 (22.9)
17502300
4000 6000 15000 20000
6.2 N.m (4.6)7.2 N.m (5.3)
15 (20.1)
13 (17.4)
11 (14.8)
29 N.m (21.4) 10min
24 N.m (17.7) 30min18 N.m (13.3) Cont. 5.3 N.m (3.9)
12 N.m (8.9)9.5 N.m (7.0)
7 N.m (5.2)
12000
35 N.m (25.8) 10min
18.5 kW (24.8) 10min
15 kW (20.1) 30min
11 kW (14.8) Cont.
22 kW S3 15%, 10min
Spindle speed (r/min)
Torque : N.m (ft-lbs) Power : kW (Hp)
11 kW (14.8)
7.5 kW (10.1)
Spindle power-torque diagram
• Max. Spindle Speed : 20000 r/min • Spindle motor : 22 kW (29.5 HP)
• Max. Spindle Speed : 30000 r/min • Spindle motor : 18.5 kW (24.8 HP)
Std.
StructureIts double column design and robust base give the NX Series an excellent foundation forhigh-performance, high-accuracy machining.
NX 4500 / 5500 / 6500
240 mm(9.4 inch)
200 mm(7.9 inch)
Rigidity ATC & MagazineThermal analysis of the symmetricalstructure and minimal overhangshows the rigidity of the encloseddesign thus providing the optimalsolution for high-speed / high-precision processing.
NX series General processing system
Roller guide applied
Ball screw nut coolingFeed axis thermal displacement largely reduced Feed drive strength maintained in stable condition
Rigid coupling
Center weightBy minimizing the distancebetween weight center and thefeed drive center, the inert iamovement is reduced allowing forfaster feed rates and a moreprecise part.
High output / High inertia motorThrough overall axial load / motor inertia ratio of less than 50%, we haveimproved the responsiveness of feed drive.
High strength feed drive
24ea (NX 4500)
30ea (NX 5500/6500)
Number of tools in possession
1.5s
Tool Transfer Time (T-T-T)
0.05
0.1
0.15
30
210
60
240
90
270
120
300
150
330
180 0
0.05
0.1
0.15
30
210
60
240
90
270
120
300
150
330
180 0
05
Maching condition R1 R2 R3 R4 R5 R6 R7 R8 R9 R10
Application
ResultQuality Normal
Long
High speed
Good
Normal
High quality
Tool life
Initial choice
High-speed / high-precision contour control - DSQ : Doosan Super Quality
Machining condition selection function
with DSQ without DSQ
It is possible to change machining condition in 10 steps by using R code at the program. - Improving productivity (high speed at rough machining, high precision at precision machining)
NC parameter such as maximum feed and accelation time constant can be set automatically
It enables to calibrate the change in position of tool through the expansion ofspindle shaft at high-speed rotation.
Thermal displacement compensation- DHC : Doosan Heat Control
befo
re
timeSpindle rotation
Deviation of thermal displacement of spindle after calibration
Thermal displacement of spindle before calibration
Ther
mal
disp
lacem
ent o
f spi
ndle
At rotation At halt
Increase inaxial direction
We materialized the minimization of thermal displacement so as to maintain high-precision in spite oflong-time processing.
Without smoothing With smoothing
• AICC2• 600 Block Look ahead• Selection of processing condition• High-speed Data Server 1GB• High-speed CPU mounted
DSQ3
5000 r/min 10000 r/min 15000 r/min 20000 r/min5000 r/min
10000 r/min
15000 r/min
20000 r/min
DSQ
Doosan Super Quality
DHC
Doosan Heat Control
06 High-Precision High-Speed Vertical Machining Center
Optimized tool processing solutionSuperior surface finishes and machining accuracy are achieved through using standard processing solutionssuch as high-speed / high - precision contour control and thermal displacement compensation.
NX 4500 / 5500 / 6500
std. std.
Specimen tested : VASE
Calibration of static displacement of spindle
It calibrates inconsistent bending or expansion owing to the change in externaltemperature using a number of temperature sensors.
Calibration of structure thermal displacement
Spindle thermal displacement calibration andcompensation is performed through spindle rotationmeasurement analysis and adjustment within 5algorithms.
Calibration of dynamic displacement of spindle
afte
r
Comparison of processing time & examples of processing
NAK 80
4 ea
120 x 60 x 50
0 700 s600400 500300100 200
SavingPrevious
36%699 min
450 min
Previous
0 100 s806020 40
Saving
34%
90 min
60 min
Previous
0 100 s806020 40
Saving
33%
98 min
66 min
Previous
0 100 s806020 40
Saving
27%
396 s
290 s
Mobile Phone
Pet Bottle
Door Knob
Processed goods Processing time
ø1 Ball20000 r/minFeed2200 mm/min.
NAK 80
1 ea
75 x 75 x 50ø6 Ball20000 r/minFeed2000 mm/min.
NAK 80
2 ea
60 x 60 x 40ø4 Ball20000 r/minFeed2200 mm/min.
SKD 61
1 ea
70 x 60 x 30ø6 Ball20000 r/minFeed3000 mm/min.
Dia
0.2 mmLength
20 mmMaterial
NAK80Hardness
HRC43r/min
20000Feedrate
1400
Company Time
2hours27minutes
DOOSANNX 4500
One Needle (PMS 200, 3 Dimensional Measuring Machine)
Micron Cutting Depth : 1~10 µm
Depth : 5 µm
Depth : 2 µm
Depth : 10 µm
1 µm 2 µm 3 µm
4 µm 5 µm 6 µm
7 µm 8 µm
10 µm
9 µm
Example of processing needle pin
Example of processing cellular phone key pad
Processing condition of needle pin
Processed goods
Key PadSize
40 x 60 x 30Material
NAK 80Tool
D1 Bemr/min (min.-1)
20000Feed (m/min.)
850Processing time
1Hr 13 min.
Processing condition of needle pin
Roundness and Preciseness
Max. 4.0 µmRoundness
R=10 mm µmRadius
F=4000 mm/sFeeding Speed
07
Performance of processingTest results prove greater workpiece precision and shorter cycle times.
NX 4500 / 5500 / 6500
Materials and tools Finish
Operation Chip DisposalThrough rapid discharge of chips, it maintains the degree of precision in processing, and supportsthe operator to work in improved environment by providing a variety of chip treatment devices.
We adopted 2-row screw. Discharging cutting coolant separately from lubricating oil.
Improved work efficiency and convenience through in ergonomic design analysis.
Swivel-type operating panel
MobileMPG
Operating panel on screen canbe rotated up to 90° raising theconvenience of the operator.
It remembers its position of the machinery, due to theinstallation of battery which works with power off, andtherefore you can operate immediately without returningto the original point when turning the equipment on.
10.4" Color TFTLCD Monitor
Magazine : CW
Magazine : CCW
5
1
1 2
3 4
5 62
3
4
ATC operating button
Monolever
Unit : mm (inch)
Warning light(Indicates unusual condition of the equipment)
Completion light(Indicates the completion of procession)
Progress Light(Indicates the processing in progress)
A
B
C
NX 4500 826 (32.5)NX 5500 790 (31.1)NX 6500 970 (38.2)
A
B
C
NX 4500 350 (13.8)NX 5500 240 (9.44)NX 6500 326 (12.8)
NX 4500 770 (30.3)NX 5500 860 (33.9)NX 6500 780 (30.7)
Operating Console
Excellent accessibility Convenient absolute feeding
3-step Patrol Lamp
Oil/Water Separation Structure
Cutting coolant oil dispenser
Chip conveyor
Hinge type Scraper type Drum filter type
Inside screw conveyor
Side coolant Chip air blowerCutting coolant residue stopping device
Spindle section coolant
LCD Portable MPG Handle
08 High-Precision High-Speed Vertical Machining Center
opt.
opt.
opt.
std.
opt.
std.
std.
std.
NX 5500(Side discharge)
NX 6500(Front side discharge)
Coolant ChillerThe coolant chiller lowers coolanttemperature, helping to cool both theworkpiece and tool during themachining operation. When usinginsoluble cutting oils, a coolant chiller isrecommended to cool heated oil andpreserve machining precision.
Coolant tank
Coolant chiller
Software
Programming
It automatically generates its pattern cycleprogram through the method of inputtinginteractive factor.
Pattern Cycle
Embodying the function of automaticallymeasuring tool length/diameter and detectingthe tool damage in interactive service style.
Renishaw Gui
Function of detecting tool wear and damagestatus through setting up load limits by thespindles and axis during cutting / moving so asto minimize the damage of the apparatus part.
Tool Load Monitor
It guides the user to easily restore originalcondition, when ATC suddenly stops itsoperation, due to emergency stop or unusualoperation.
ATC Recovery Help
Displaying tool information on POT in 2D graphic.
Tool Data Registry Table
Function of measuring and monitoring of theoperation ratio for the equipment by eachoperator.
Operation Rate
Machine operation, setup, programing functions and operator efficiency is increased through the use ofFanuc 31i series of control.
Tool measure
By detecting cutting load at real time basis duringprocessing and subsequently adjusting cuttingspeed automatically, which can be minimized thedamage of the tool and equipment, throughenhancing processing productivity.
Doosan Adaptive Feed Control
Fanuc 31i-A / 10.4" color LCD / Part Program Storage 640m / Ethernet Function (Embedded)
09
opt.
opt.
std.
NX 4500 / 5500 / 6500
A(L) B(W) C D(H)
NX 4500 2270 2756 2592 2870(89.4) (108.5) (102.0) (113.0)
NX 5500 2430 2800 2891 2971(95.7) (110.2) (113.8) (117.0)
NX 6500 2850 3254 2907 3268(112.2) (128.1) (114.4) (128.7)
External Dimensions & Table Dimensions Unit : mm (inch)
A B
C D
800 (31.5)
62.5
(2.5
)12
5(4
.9)
125
(4.9
)12
5(4
.9)
62.5
(2.5
)50
0 (1
9.7)
18 H8 (0.7)
18 (0
.7)
30 (1
.2)
0.5
17 (0.7)30 (1.2)
40 (1.6
)80 (3.1
)41
0 (1
6.1)
80 (3.1
)40 (1.6
)65
0 (2
5.6)
242.5(9.5)
100(3.9)
515 (20.3) 100(3.9)
242.5(9.5)1200 (47.2)
16-M24X3.0 TAP,DP24
75 (3.0
)125
(4.9
)12
5(4
.9)
125
(4.9
)12
5(4
.9)
75 (3.0
)
30(1.2)
18 (0
.7)
32 (1
.3)
75 (3.0
)10
0(3
.9)
100
(3.9
)10
0(3
.9)
100
(3.9
)75 (3.0
)
1000 (39.4)
550
(21.
7)
30(1.2)
20 (0
.8)
12(0
.5) 32 (1
.3)
0.5
18 (0.7) H8+0.027 0
18 (0.7) H8+0.027 0
ø 17
(0.7
)
ø 72
.7 (2
.9)
ø 63
(2.5
)
ø 53
(2.1
)
ø 44
.5(1
.8)
65.4 (2.6)27 (1.1)25 (1.0) 2
(0.1)
10 (0.4)
16.6(0.7) Taper 7/24
M16
60˚
ø 23
(0.9
)
ø 17
(0.7
)ø
7(0
.3)
ø 19
(0.7
)
ø 14
(0.6
)
29 (1.1)
M16
54 (2.1)
15˚
ø 38
.5 (1
.5)
ø 36
(1.4
)
ø 63
(2.5
)
ø 55
(2.2
)
8 (0.3)18 (0.7) 25 (1.0)60°
10 High-Precision High-Speed Vertical Machining Center
Tool ShankTable
20000 r/min 30000 r/min opt.
X, Y, Z axis mm (inch) 600 / 450 / 400 900 / 550 / 500 1050 / 650 / 550(23.6 / 17.7 / 15.7) (35.4 / 21.7 / 19.7) (41.3 / 25.6 / 21.7)
Rapid traverse (X / Y / Z) m/min (ipm) 30 / 30 / 30 (1181.1)
Distance from spindle nose to table top mm (inch) 150 ~ 550 150 ~ 650 150 ~ 700(5.9 ~ 21.7) (5.9 ~ 25.6) (5.9 ~ 27.6)
Table size mm (inch) 800 x 500 1000 x 550 1200 x 650(31.5 x 19.7) (39.4 x 21.7) (47.2 x 25.6)
Max. spindle speed r/min 20000 {30000}
Taper spindle taper ISO #40 7/24 {HSK-F63}
Spindle motor (10min/cont.) kW (Hp) 22 / 11 (29.5 / 14.8) {18.5 / 13 (24.8 / 17.4)}
Max. spindle torque (10min) N.m (ft-lbs) 60 (44.3) {5.9 (4.3)}
Number of Tools ea 24 30 30
Max. tool Diameter mm (inch) 90 (3.5) 80 (3.1)
Max. tool diameter without adjacent tools mm (inch) 140 (5.5) 125 (4.9)
Max. tool Length mm (inch) 250 (9.8)
Max. tool Weight kgf (lbs) 8 (17.6)
Tool change time (tool-to-tool) s 1.5
Method of tool selection Type Swing Arm
Machine Dimension (L x W) mm (inch) 2270 x 2756 2430 x 2800 2850 x 3254(89.4 x 108.5) (95.7 x 110.2) (112.2 x 128.1)
Machine height mm (inch) 2870 (113.0) 2971 (117.0) 3268 (128.7)
Machine weight kgf (lbs) 8000 (17637.0) 9000 (19841.6) 10000 (22046.2)
Fanuc 31i
11
Machine SpecificationsItem NX 4500 NX 5500 NX 6500
Feed per Stroke
Spindle
Tool Size
NC System
ATC
Table
Standard Feature
Optional Feature
• Splash Guard• Portable MPG• Coolant tank & Chip fan• Assembly & operation tools• Automatic tool measurement• Air blower• DSQ 3 (AICC2 / 600 Block Look ahead /
Processing condition can be selected / High-speed Data Sever 1GB / High-speed CPU mounted)
• Screw conveyor• Auto power off• BIG PLUS Dual Contact Spindle (20000 r/min)
HSK-F63 Dual Contact Spindle (30000 r/min)• DHC
(Thermal Displacement Calibration System)• Mono-Lever• Ball Screw Nut Cooling System• Spindle Cooling System• Work light
• Through spindle coolant• Mist collector• 4th / 5th axis preparation• Chip conveyor & chip bucket• Air dryer• Test bar• DAFC• DTMM• Graphite Processing Package Operation (NX 5500)• Coolant Chiller
{ } : Option.
AXES CONTROL- Controlled axes 3 (X,Y,Z)- Simultaneously controllable axes
Positioning (G00) / Linear interpolation (G01) : 3 axesCircular interpolation (G02, G03) : 2 axes
- Backlash compensation- Least command increment 0.001mm / 0.0001"- Least input increment 0.001mm / 0.0001"- Machine lock all axes / Z axis - Mirror image Reverse axis movement
(setting screen and M - function)- Stored pitch error compensation
Pitch error offset compensation for each axis- Stored stroke check 1 Overtravel controlled by software
INTERPOLATION & FEED FUNCTION- 2nd reference point return G30- Exact stop check G09, G61(mode)- Skip function G31- Reference point return G27, G28- Rapid traverse override F0 (fine feed), 25 / 50 / 100%- Feedrate override :10% increments 0 - 200%- Jog override :10% increments 0 - 200%- Override cancel M48 / M49- Manual handle feedrate 0.1/0.01/0.001mm- Automatic acceleration / deceleration- Helical interpolation- DSQ 3 600 block preview
(AICC II with High speed processing + Machine condition selection function + Data server + 1GB)
- Thread cutting, synchronous cutting- Program restart- Automatic corner deceleration (Specify AI Contour control II)- Linear ACC / DEC before interpolation
(Specify AI Contour control II)- Linear ACC / DEC after interpolation- Rapid traverse bell-shaped acceleration / deceleration- Smooth backlash compensation
SPINDLE & M-CODE FUNCTION- M- code function M 3 digits- Spindle orientation- Spindle speed command S5 digits- Spindle speed override : 10% increments 50 - 150%- Spindle output switching - Rigid tapping G84, G74
TOOL FUNCTION- Tool nose radius compensation G40, G41, G42- Number of tool offsets 64 ea- Tool length compensation G43, G44, G49- Tool number command T3 digits- Tool life management- Tool offset memory C
H/D Code, Geometry / Wear memory- Tool length measurement
PROGRAMMING & EDITING FUNCTION- Absolute / Incremental programming G90 / G91- Auto. Coordinate system setting- Background editing- Canned cycle G73, G74, G76, G80 - G89, G99- Circular interpolation by radius programming- Custom macro B- Custom size 512kb- Addition of custom macro common variables- Inch / metric conversion G20 / G21- Label skip- Local / Machine coordinate system G52 / G53- Maximum commandable value
±99999.999mm (±9999.9999 inch)- No. of Registered programs 500 ea- Optional block skip- Optional stop M01- Part program storage 640 m- Program number O4-digits- Program stop / end M00 / M02, M30
- Programmable data inputTool offset and work offset are entered by G10, G11
- Sub program Up to 10 nesting- Tape code ISO / EIA Automatic discrimination- Work coordinate system G54 - G59- Additional work coordinate system (48 Pairs)
G54.1 P1 - 48 pairs- Coordinate system rotation G68, G69- Extended part program editing
Operation, Setting & Display, etc- Alarm display- Alarm history display- Clock function- Cycle start / Feed hold- Display of PMC alarm message
Message display when PMC alarm occurred- Dry run- Ethernet function (Embedded)- Graphic display Tool path drawing- Help function- Loadmeter display- MDI / DISPLAY unit
10.4" color LCD, Keyboard for data input, soft-keys- Memory card interface- Operation functions Tape / Memory / MDI / Manual- Operation history display- Program restart- Run hour and part number display- Search function Sequence NO. / Program NO.- Self - diagnostic function- Servo setting screen- Single block- External data input- Multi language display
OPTIONAL SPECIFICATIONS- 3-dimensional coordinate conversion- 3-dimensional tool compensation- 3rd / 4th reference return- Addition of tool pairs for tool life management 1024 pairs- Additional controlled axes max. 12 axes per 1path- Additional work coordinate system G54.1 P1 - 300 (300 pairs)- Automatic corner override G62- Chopping function / Cylindrical interpolation G81.1 / G07.1- Dynamic graphic display (This can’t use with the EZ Guide-i)
Machining profile drawing- Interpolation type pitch error compensation- EZ Guide i
(Doosan infracore Conversational Programming Solution) with 10.4" Color TFT
- Tape format for FS15 - Increment system 1/10- Figure copying G72.1, G72.2- Manual handle feed 2/3 unit- Handle interruption- High speed skip function- Involute interpolation G02.2, G03.2- Machining time stamp function- No. of Registered programs 1000 ea- Number of tool offsets
99 / 200 / 400 / 499 / 999 / 2000 ea- Optional block skip addition 2~9 blocks- Part program storage 1280 / 2560 / 5120 / 20480 m- Playback function- Polar coordinate command G15 / G16- Polar coordinate interpolation G12.1 / G13.1- Programmable mirror image G50.1 / G51.1- Scaling G50, G51- Single direction positioning G60- Stored stroke check 2 / 3- Tool load monitoring function (doosan)- Tool offset G45 - G48- Position switch
NC Unit Specifications Fanuc 31i-A
EX 1103SPi-serDesign and specifications are subject to change without prior notice.
Head Office : Doosan Tower 23rd FL., 18-12, Euljiro-6Ga, Jung-Gu, Seoul, Korea 100-730 Tel : ++82-2-3398-8693 / 8671 / 8680 Fax : ++82-2-3398-8699Doosan Infracore America Corp.: 19 Chapin Rd. Pine Brook, NJ 07058, U.S.A. Tel : ++1-973-618-2500 Fax : ++1-973-618-2501Doosan Infracore Germany GmbH : Hans-Böckler-Strasse 29, D-40764 Langenfeld-Fuhrkamp, Germany. Tel : ++49-2173-8509-0 Fax : ++49-2173-8509-60Doosan Infracore Yantai Co., LTD : 13 Building, 140 Tianlin Road, Xuhui District, Shanghai, China (200233) Tel : ++86-21-6440-3384 (808, 805) Fax : ++86-21-6440-3389
http://www.doosaninfracore.com/machinetools