High-productivity Compact Turning Center Added with Y … · High-productivity Compact Turning Center ... CNC turning center. If a user ... Programming G Code list M Code list

High-productivity Compact Turning Center Added with Y-axis

High-productivity Compact Turning Centerwith Y-axis Based on Lynx Series

Lynx Y series addition of stable and rigid Y-axis based on Lynx model makes possible to

complete machining in 1 set-up. The longest Y-axis off-center machining is available, and

through reducing cycle time and non cutting time provides your productivity improvement.

LM guide structure makes high precision and speed, so this helps machining ability.

Also, new Doosan operation panel designed ergonomically provides convenience.

02

03

Features

Operation Convenience

New Doosan operation panel designed ergonomically and 10.4” color LCD provides convenient operation for operators

3

Added with Y-axis

The addition of Y-axis to the Lynx Series provides travel stability, higher precision and higher rigidity leading to improved productivity.

1

High productivity

All the axes are applied with fast, accurate and high rigidity, roller-type LM guide to minimize idle time and maximize productivity.

2

X-axisY-axis

Z-axis

04

In the Y-axis plane, tools can move in a plus or minus direction perpendicular to the Z-axis and spindle center line. Viewed from the operator's perspective, this Y-axis motion is toward or away from the door of the machine while X-axis moves from floor to ceiling. Y-axis enables various shape of cutting. Y-axis is realized virtually by the linear interpolation and synchronous movement of X1 and X2-axis that make it possible to lower machine height for stability.

Virtual Y-axis function Y SY LSY

105 (±52.5) mm (4.1 (±2.1) inch)Y-axis travel distance

10 m/minY-axis rapid traverse rate

Added with Y-axisThe addition of Y-axis to the Lynx Series provides travel stability, higher precision and higher rigidity leading to improved productivity.

Simultaneous XYZ motion provides the capability milling complex shapes. In addition, the rigidly clamped C-axis disc brake enables heavy duty and precision machining.

All enough in single setup

LYNX 220Y series

Z-axis

Y-axis

Ys-a

xis

X-ax

is

Z-axis

Y-axis

Ys-a

xis

X-ax

is

Y-axis

Y-axis

Y-axis

Y-axis

Y-axis

YX

Y-axis

YX

On-center face groove Poly-side machine Off-center side groove Y&X-axis circular interpolation

05

Basic Structure

High Rigid & Stable Machine Structure

Having roller type LM Guide at all axes applies high rigidity and high accuracy.

Travel distance

X-axis 205 mm (8.1 inch)

Z-axis 350 mm (13.8 inch) (Y)

560 mm (22.0 inch) (LY / LSY)

Capacity

Lynx 220YA / LYA / LSYA Lynx 220YC / LYC / LSYC

Spindle speed 6000 r/min 4500 r/min

Max. Turning diameter 300 mm (11.8 inch)

Bar working diameter 51 mm (2.0 inch) 65 mm (2.6 inch)

Chuck size 6 inch 8 inch

Rapid Traverse Rate

X-axis 30 m/min

Z-axis 36 m/min

Max. Turning length

300 mm (11.8 inch) (220Y) 510 mm (20.1 inch) (220LY / LSY)

X-axisY-axis

Z-axis

High productivity

All the axes are applied with fast, accurate and high rigidity, roller-type LM guide to minimize idle time and maximize productivity.

Turret

Turret Indexing time (1 station swivel) 0.11 S

Max. Rotary tool speed 6000 r/min

06

Lynx Series added with SY-axis, enabling One Set-up Save time, reduce labor, high accuracy!

1 set-up / 1 operator 2 set-up / 2 operators

= +

Lynx 220LSY Machine 1 Machine 2

Workpiece : Machinery Component

Material : Aluminum (AL7075)

Workpiece size : Ø70 x 35 mm

Cutting tool : 16 set

Productivity Effect

Machine 1 Machine 2

manual transfer1 min

Setting30 sec

Setting10 sec

Milling Cutting6 min 20 sec

Turning Cutting1 min 10 sec

General Cutting Process

Lynx 220 LSY

Machine

Lynx 220 LSY

auto transfer12 sec

Milling Cutting5 min 30 sec

Setting10 sec

Turning Cutting1 min 5 sec

2 min 13 sec Shorter

* Cutting time curtailment : Tool change time & Rapid traverse rate Calculation

Productivity

25 %Improved

Finished processing time comparison

This function enables the position setting of tail stock automatically. In programmable tail stock, the Z-axis position of tail stock is recorded automatically as the clamped position of tail stock. When tail stock needs to move to the other position, Z-axis moves to the pre-recorded position of Z-axis and tail stock unclamps by the button of Operation Panel.

EZ automatic tail stock function (LY)

This is specially designed for improving the efficiency of CNC turning center. If a user selects target tool to be checked by Tool Setter in manual mode, its moving axis is advanced forward to make the setter easy to touch off the tools, and the axis moves backward after touching the tool automatically.

EZ tool setter function

Power Saving Function

This is smart function that can turn off the machine light automatically when no user touches key board of operation panel during specified time.

Automatic machine light turns off

If CNC operator's panel has not been used for a time, the motors for spindle, servo axis, coolant pump and chip conveyor etc. are powered off automatically. It is effective to reduce standby power. Save up stand by power from 10 to 14%.

Automatic machine sleep

07

Doosan’s New Operation Panel

1. 10.4” color LCD : Easy to control and programming

2. Unique operator panel of Doosan Infracore designed with membrane switches

3. New operator panel for all the models with enhanced accessibility

4. User configurable, detachable buttons to set up customized options

Doosan-Fanuc i series10.4" color TFT LCD monitorLarge 10.4" LCD screen showing error messages of the machine and controller improves operator’s work convenience.

PCMCIA Card

1

2

3

USB Port Ethernet Connectivity (embedded)Swing-type PanelThe operation panel can swing up to 88° to provide the operator with convenience during work.

4

5

6

12

34

5

6

EZ FunctionThis function is to support simple setting of Tool Setter and improve the function to set tail stock position automatically with recorded tail stock position.

New Doosan operation panel designed ergonomically and 10.4” color LCD provide convenient operation for operators

Operation Convenience

08

Easy Operation Package

These DOOSAN software packages have been customized to provide user-friendly functions.

ProgrammingG Code list M Code list

Operator can check the meaning of each G-code.

Operator can check the meaning of each M-code.

Operator can calcute numerical formula in relation to arc and hole easily.

Calculator

Cycle for lathe machining• Drilling

• Bar roughing (including preformed work-piece)

• Bar finishing

• Threading (General purpose thread, metric, etc.)

• Grooving (Standard, Trapezoidal)

Easy Guide iOperation Guidance, which supports entire operations on an all-in-one screen for daily machining including creating a program on the machine.

• Uses one display screen to perform all operations including programming, checking by animation, and real machining.

• User-Friendly Operation : Soft key selection of comprehensive cycle library

• Easy programming Based on ISO-code program format, complex machining motions can be created easily by this menu format.

• Machine status window Machine status such as actual position, feedrate and load meter are always displayed.

• Realistic machining simulation 3-D solid model machining simulation is available.

• Intuitive menu selecting Menu can be selected easily and intuitively by soft-keys with icons.

Programming time can be reducedCycle machining menus for both of lathe

machining and milling are available

Operation / Maintenance

A major determinant of efficiency is the cost associated with setting up the equipment to make a particular product. This software can be used to manage machine operation rate of 3 operators. Total machine operation and real machining time for a month can be recorded and measured. It helps to evaluate and monitor each operational efficiency. To keep it secure, Password setting is essential.

Operation rate - user log in Back up custom dataTool load monitor

The main function of this software is to detect overload when a tool is wrong, and change it to an other tool. Stop machine to protect a tool holder and next tools by detecting overload caused by tool breakage or its wear. Use editable tool life management for spare tools. Monitor load meter for all spindles and axes. If the tool load reaches abnormal band recorded in “Set data”, the software issues an feed hold alarm or skips the tool.

This can be used to record tool load information detected in “Tool load monitor” for all tools used during cutting. By reloading recorded data in tool table, Tool Load Monitor software can compare the actual tool load with a recorded load pattern.

opt.

09

Main Spindle

Sub Spindle Rotary Tool Spindle

Lynx 220YA / LYA / LSYA6000 r/min : 15 / 11 kW

Lynx 220LSYA [LSYC]6000 r/min : 5.5 / 3.7 kW

Lynx 220Y / SY / LSY6000 r/min : 3.7kW

Lynx 220YC / LYC / LSYC4500 r/min : 15 / 11 kW

Torque : N.m (ft-lb) Power : kW (Hp)

0 1125 60003410

Spindle speed (r/min)

Max. 47N.m (34.7ft-lb) / 30min

Max. 31N.m (22.9ft-lb) /Cont.

3.7kW (5.0Hp)/ Cont.

5.5kW (10.1Hp) / 30min

0.5N.m (0.7ft-lb)0.8N.m (1.1ft-lb)

2.7kW (3.6Hp) / Cont.

3.9kW (5.2Hp) / 30min

15 kW (20.1Hp) / 30min

11 kW (14.8Hp) / 30min


0 1125 60002625


Max. 127N.m(93.7ft-lb) / 30min

Max. 93N.m (68.6ft-lb) / Cont.

1.2N.m (1.6ft-lb)

6.5kW (8.7Hp) / Cont.

7.5kW (10.1Hp) / 30min

1.1N.m (1.5ft-lb)


0 844 45001969


Max. 169N.m (124.7ft-lb) / 30min


15kW (20.1Hp) / 30min

6.5kW (8.7Hp) / Cont.

7.5kW (10.1Hp ) / 30min

1.6N.m (2.1ft-lb)

1.4N.m (1.9ft-lb)


0 1500 6000


Max. 23.5N.m (17.3ft-lb)

Max. 7N.m (5.2ft-lb)

1.1kW (1.5Hp) / Cont.

5.9 N.m (4.4ft-lb)0.8 N.m (0.6ft-lb)

3.7kW (5.0Hp) /10min, S3 25%

11kW (14.8Hp) / 30min

Lynx 220YA / LYA / LSYA6000 r/min : 15 / 11 kW

Lynx 220LSYA [LSYC]6000 r/min : 5.5 / 3.7 kW

Lynx 220Y / SY / LSY6000 r/min : 3.7kW

Lynx 220YC / LYC / LSYC4500 r/min : 15 / 11 kW


0 1125 60003410


Max. 47N.m (34.7ft-lb) / 30min

Max. 31N.m (22.9ft-lb) /Cont.

3.7kW (5.0Hp)/ Cont.

5.5kW (10.1Hp) / 30min

0.5N.m (0.7ft-lb)0.8N.m (1.1ft-lb)

2.7kW (3.6Hp) / Cont.

3.9kW (5.2Hp) / 30min

15 kW (20.1Hp) / 30min

11 kW (14.8Hp) / 30min


0 1125 60002625


Max. 127N.m(93.7ft-lb) / 30min


1.2N.m (1.6ft-lb)

6.5kW (8.7Hp) / Cont.

7.5kW (10.1Hp) / 30min

1.1N.m (1.5ft-lb)


0 844 45001969


Max. 169N.m (124.7ft-lb) / 30min


15kW (20.1Hp) / 30min

6.5kW (8.7Hp) / Cont.

7.5kW (10.1Hp ) / 30min

1.6N.m (2.1ft-lb)

1.4N.m (1.9ft-lb)


0 1500 6000


Max. 23.5N.m (17.3ft-lb)

Max. 7N.m (5.2ft-lb)

1.1kW (1.5Hp) / Cont.

5.9 N.m (4.4ft-lb)0.8 N.m (0.6ft-lb)

3.7kW (5.0Hp) /10min, S3 25%

11kW (14.8Hp) / 30min

Power-torque Diagram

210 (8.3)

Ø

175 (6.9)Ø

135 (5.3)

Ø

300

(11.

8)

Ø

205 (8.1)

55 (2.2)

200

(7.9

)

Ø

552 (21.7)

Ø

170 (6.7)Ø

242

(9.5

)

Ø

114 (4.5)Ø

225 (8.9)

Ø

34.5

(1.3) (22.4)68.5 13 (0.5)

Ø

40 (1

.6)

230

(9.1

)

Ø

61.5(2.4)

52

126

(5.0

)

3060(2.4)(1.2)

160 (6.3)

150 (5.9)

(2.0) [Max

.turn

ing

dia.

]

[Main spindle/6-inch chuck]

[Main spindle/8-in

ch chuck]

[Sub spindle/5-inch chuck]

[X-axis travel]

[Max.tool swing]

210 (8.3)

Ø

300

(11.

8)

Ø

205 (8.1)

55 (2.2)

175 (6.9)Ø

218 (8.6

)

Ø

218 (8.6)Ø

175 (6.9)

Ø

218 (8.6)

Ø

552 (21.7)

Ø

61.5(2.4)

150 (5.9)

3060 (2.4)(1.2)

160 (6.3)

126

(5.0

)

52(2.0)

[Max. tool swing]

[Main spindle/6-inch chuck]

[Max

.turn

ing

dia.

]

[Main spindle/8-in

ch chuck]

[X-axis travel]

52.5

(2.1)

52.5

(2.1)

105

(4.1

)

65 (2.6)160 (6.3)

175 (6.9) 25 (1.0)

200 (7.9)[X-axis travel]

[Y-a

xis

trave

l]

Spindle CenterInterference Areawith Tail Stock

160 (6.3) 1195 (7.7)44 (1.7)

59 (2.3)

[Y-a

xis

trave

l]

[X-axis travel]

Spindle CenterInterference Areawith Tail Stock

52.5

(2.1)

52.5

(2.1)

105

(4.1

)

175 (6.9) 1160 (6.3) 65 (2.6)

[Y-a

xis

trave

l]

Spindle CenterInterference Areawith Sub Spindle

[X-axis travel]

52.5

(2.1)

52.5

(2.1)

105

(4.1

)

160 (6.3) 20 (0.8)44 (1.7)

59 (2.3)

176 (6.9)[X-axis travel]

[Y-a

xis

trave

l]

Spindle CenterInterference Areawith Sub Spindle

52.5

(2.1)

52.5

(2.1)

105

(4.1

)

Tool Interference

unit : mm (inch)Lynx 220LY

Lynx 220LSY

10

A B C D E F G H I J K L M

L220Y 2233(87.9)

190 (A) / 220 (C)(7.5 / 8.7)

50(2.0)

2605(102.6)

3299(129.9)

734(28.9)

1921(75.6)

2243(88.3)

10(0.4)

1060(41.7)

1702(67.0)

2100(82.7)

448(17.6)

L220LY 2660(104.7)

190 (A) / 220 (C)(7.5 / 8.7)

50(2.0)

3249(127.9)

3726(146.7)

734(28.9)

1921(75.6)

2243(88.3)

10(0.4)

1060(41.7)

1702(67.0)

2100(82.7)

448(17.6)

unit : mm (inch)

11

External Dimensions

External Dimensions

B

C

A

I

H

E

D

F

G

L

J

K M

SIDE CHIP COVEYOR(Hinged Type)

SPINDLE CENTER

B

C

A

I

H

E

D

F

G

L

J

K M

SIDE CHIP COVEYOR(Hinged Type)

SPINDLE CENTER

Lynx 220LYA / LYC

ID Tool OD Tool

Straight Milling Face Tool

Working Range

unit : mm (inch)

65 (2.6

)

8069.5(LYA)/88(LYC)

205

(8.1

)

10(0.4)

(OT)

2 (0

.1)(O

T)30

(1.2

)17

5 (6

.9)

52 (2

.0)

26 (1.0) 84.5 (3.3)

(QUILL TRAVEL)

(TAIL STOCK TRAVEL)

(Z-AXIS TRAVEL)

(X-A

XIS

TRAV

EL)

46 (1.8)(LYA) / 27.5 (1.1)(LYC)65 (2.6)(LYA) / 83.5 (3.3)(LYC)

80 (3.1)

560 (22.0)

560 (22.0)

(2.7) (3.5) (3.1)

2 (0

.1)(

OT)

10(0.4)

(OT)

6030

(1.2

)(2.4

)

42 (1

.7)

150

(5.9

)55

(2.2

)

8069.5(LYA)/88(LYC)

96.5 (3.8)

(QUILL TRAVEL)

(X-A

XIS

TRAV

EL)

(Z-AXIS TRAVEL)

(TAIL STOCK TRAVEL)

53 (2.1)(LYA) / 71.5 (2.8)(LYC)46 (1.8) (LYA) / 27.5 (1.1)(LYC)

80 (3.1)

205

(8.1

)

29(1.1)

560 (22.0)

560 (22.0)

(2.7) (3.5) (3.1)

8069.5(LYA)/88(LYC)

205

(8.1

)

16 (0

.6)

189

(7.4

)

29.5 (1.2)29 (1.1)

51 (2.0

)

10(0.4)

(OT)

2 (0

.1)(

OT)

2 (0

.1)

(QUILL TRAVEL)

(X-A

XIS

TRAV

EL)

(Z-AXIS TRAVEL)

(TAIL STOCK TRAVEL)

120 (4.7)(LYA) / 138.5 (5.5)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)

80 (3.1)

560 (22.0)

560 (22.0)

(2.7) (3.5) (3.1)

80 (3.1)

560 (22.0)

560 (22.0)

(2.7) (3.5) (3.1)

10(0.4)

(OT)

2 (0

.1)(

OT)

175

(6.9

)30

(1.2

)

14 (0

.6)

26(1.0)

104.5 (4.1)

205

(8.1

)

30 (1.2)

5(0

.2)(

2.4)60

8069.5(LYA)/88(LYC) (QUILL TRAVEL)

(X-A

XIS

TRAV

EL)

(Z-AXIS TRAVEL)

(TAIL STOCK TRAVEL)

45 (1.8)(LYA) / 63.5 (2.5)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)

54 (2

.1)

175

(6.9

)30

(1.2

)

205

(8.1

)

80 258.5

99.5 (3.9)39(1.5)

10(0.4)

(OT)

2 (0

.1)(

OT)

65 (2.6

)


(X-A

XIS

TRAV

EL)

(Z-AXIS TRAVEL)

(TAIL STOCK TRAVEL)

50 (2.0)(LYA) / 68.5 (2.7)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)

80 (3.1)

560 (22.0)

560 (22.0)

(2.7) (3.5) (3.1) (10.2)

(0.4)

(0.1

)(O

T)

205

(8.1

)

46 (1.8)(LYA) / 27.5 (1.1)(LYC)

80 (3.1)

560 (22.0)

560 (22.0)

8069.5(LYA)/88(LYC)(2.7) (3.5) (3.1)

45 (1.8)(LYA) / 63.5 (2.5)(LYC)

10(OT)

2

175

(6.9

)30 (1.2

) 14(0

.6)

26(1.0)

104.5(4.1)

30(1.2)

5(0

.2)

60 (2.4

)

(QUILL TRAVEL)

(X-A

XIS

TRAV

EL)

(Z-AXIS TRAVEL)

(TAIL STOCK TRAVEL)

65 (2.6

)

8069.5(LYA)/88(LYC)

205

(8.1

)

10(0.4)

(OT)

2 (0

.1)(O

T)30

(1.2

)17

5 (6

.9)

52 (2

.0)

26 (1.0) 84.5 (3.3)

(QUILL TRAVEL)

(TAIL STOCK TRAVEL)

(Z-AXIS TRAVEL)

(X-A

XIS

TRAV

EL)

46 (1.8)(LYA) / 27.5 (1.1)(LYC)65 (2.6)(LYA) / 83.5 (3.3)(LYC)

80 (3.1)

560 (22.0)

560 (22.0)

(2.7) (3.5) (3.1)

2 (0

.1)(

OT)

10(0.4)

(OT)

6030

(1.2

)(2.4

)

42 (1

.7)

150

(5.9

)55

(2.2

)

8069.5(LYA)/88(LYC)

96.5 (3.8)

(QUILL TRAVEL)

(X-A

XIS

TRAV

EL)

(Z-AXIS TRAVEL)

(TAIL STOCK TRAVEL)

53 (2.1)(LYA) / 71.5 (2.8)(LYC)46 (1.8) (LYA) / 27.5 (1.1)(LYC)

80 (3.1)

205

(8.1

)

29(1.1)

560 (22.0)

560 (22.0)

(2.7) (3.5) (3.1)

8069.5(LYA)/88(LYC)

205

(8.1

)

16 (0

.6)

189

(7.4

)

29.5 (1.2)29 (1.1)

51 (2.0

)

10(0.4)

(OT)

2 (0

.1)(

OT)

2 (0

.1)

(QUILL TRAVEL)

(X-A

XIS

TRAV

EL)

(Z-AXIS TRAVEL)

(TAIL STOCK TRAVEL)

120 (4.7)(LYA) / 138.5 (5.5)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)

80 (3.1)

560 (22.0)

560 (22.0)

(2.7) (3.5) (3.1)

80 (3.1)

560 (22.0)

560 (22.0)

(2.7) (3.5) (3.1)

10(0.4)

(OT)

2 (0

.1)(

OT)

175

(6.9

)30

(1.2

)

14 (0

.6)

26(1.0)

104.5 (4.1)

205

(8.1

)

30 (1.2)5

(0.2

)(2.

4)60


(X-A

XIS

TRAV

EL)

(Z-AXIS TRAVEL)

(TAIL STOCK TRAVEL)

45 (1.8)(LYA) / 63.5 (2.5)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)

54 (2

.1)

175

(6.9

)30

(1.2

)

205

(8.1

)

80 258.5

99.5 (3.9)39(1.5)

10(0.4)

(OT)

2 (0

.1)(

OT)

65 (2.6

)


(X-A

XIS

TRAV

EL)

(Z-AXIS TRAVEL)

(TAIL STOCK TRAVEL)

50 (2.0)(LYA) / 68.5 (2.7)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)

80 (3.1)

560 (22.0)

560 (22.0)

(2.7) (3.5) (3.1) (10.2)

(0.4)

(0.1

)(O

T)

205

(8.1

)

46 (1.8)(LYA) / 27.5 (1.1)(LYC)

80 (3.1)

560 (22.0)

560 (22.0)

8069.5(LYA)/88(LYC)(2.7) (3.5) (3.1)

45 (1.8)(LYA) / 63.5 (2.5)(LYC)

10(OT)

2

175

(6.9

)30 (1.2

) 14(0

.6)

26(1.0)

104.5(4.1)

30(1.2)

5(0

.2)

60 (2.4

)

(QUILL TRAVEL)

(X-A

XIS

TRAV

EL)

(Z-AXIS TRAVEL)

(TAIL STOCK TRAVEL)

12

Angular Milling Cut Off Holder

unit : mm (inch)

65 (2.6

)

8069.5(LYA)/88(LYC)

205

(8.1

)

10(0.4)

(OT)

2 (0

.1)(O

T)30

(1.2

)17

5 (6

.9)

52 (2

.0)

26 (1.0) 84.5 (3.3)

(QUILL TRAVEL)

(TAIL STOCK TRAVEL)

(Z-AXIS TRAVEL)

(X-A

XIS

TRAV

EL)

46 (1.8)(LYA) / 27.5 (1.1)(LYC)65 (2.6)(LYA) / 83.5 (3.3)(LYC)

80 (3.1)

560 (22.0)

560 (22.0)

(2.7) (3.5) (3.1)

2 (0

.1)(

OT)

10(0.4)

(OT)

6030

(1.2

)(2.4

)

42 (1

.7)

150

(5.9

)55

(2.2

)

8069.5(LYA)/88(LYC)

96.5 (3.8)

(QUILL TRAVEL)

(X-A

XIS

TRAV

EL)

(Z-AXIS TRAVEL)

(TAIL STOCK TRAVEL)

53 (2.1)(LYA) / 71.5 (2.8)(LYC)46 (1.8) (LYA) / 27.5 (1.1)(LYC)

80 (3.1)

205

(8.1

)

29(1.1)

560 (22.0)

560 (22.0)

(2.7) (3.5) (3.1)

8069.5(LYA)/88(LYC)

205

(8.1

)

16 (0

.6)

189

(7.4

)

29.5 (1.2)29 (1.1)

51 (2.0

)

10(0.4)

(OT)

2 (0

.1)(

OT)

2 (0

.1)

(QUILL TRAVEL)

(X-A

XIS

TRAV

EL)

(Z-AXIS TRAVEL)

(TAIL STOCK TRAVEL)

120 (4.7)(LYA) / 138.5 (5.5)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)

80 (3.1)

560 (22.0)

560 (22.0)

(2.7) (3.5) (3.1)

80 (3.1)

560 (22.0)

560 (22.0)

(2.7) (3.5) (3.1)

10(0.4)

(OT)

2 (0

.1)(

OT)

175

(6.9

)30

(1.2

)

14 (0

.6)

26(1.0)

104.5 (4.1)

205

(8.1

)

30 (1.2)

5(0

.2)(

2.4)60


(X-A

XIS

TRAV

EL)

(Z-AXIS TRAVEL)

(TAIL STOCK TRAVEL)

45 (1.8)(LYA) / 63.5 (2.5)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)

54 (2

.1)

175

(6.9

)30

(1.2

)

205

(8.1

)

80 258.5

99.5 (3.9)39(1.5)

10(0.4)

(OT)

2 (0

.1)(

OT)

65 (2.6

)


(X-A

XIS

TRAV

EL)

(Z-AXIS TRAVEL)

(TAIL STOCK TRAVEL)

50 (2.0)(LYA) / 68.5 (2.7)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)

80 (3.1)

560 (22.0)

560 (22.0)

(2.7) (3.5) (3.1) (10.2)

(0.4)

(0.1

)(O

T)

205

(8.1

)

46 (1.8)(LYA) / 27.5 (1.1)(LYC)

80 (3.1)

560 (22.0)

560 (22.0)

8069.5(LYA)/88(LYC)(2.7) (3.5) (3.1)

45 (1.8)(LYA) / 63.5 (2.5)(LYC)

10(OT)

2

175

(6.9

)30 (1.2

) 14(0

.6)

26(1.0)

104.5(4.1)

30(1.2)

5(0

.2)

60 (2.4

)

(QUILL TRAVEL)

(X-A

XIS

TRAV

EL)

(Z-AXIS TRAVEL)

(TAIL STOCK TRAVEL)

80 (3.1)

560 (22.0)80

205

(8.1

)

20 (0

.8)

185

(7.3

)

560 (22.0)

2 (0

.1)(

OT) 10

(0.4)(OT)

7 (0

.3)

29(1.1)

81.5 (3.2)

69.5(2.7) (3.5) (3.1)

(LYA)/88(LYC)

55 (2.2

)

(QUILL TRAVEL)

(X-A

XIS

TRAV

EL)

(Z-AXIS TRAVEL)

(TAIL STOCK TRAVEL)

68 (2.7)(LYA) / 84.5 (3.3)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)

80 (3.1)

560 (22.0)

560 (22.0)

205

(8.1

)

29(1.1)

81.5 (3.2)

(2.7) (3.5) (3.1)80

10(0.4)

(OT)

2 (0

.1)(

OT)

56 (2

.2)1

49 (5

.9)

43 (1

.7)

69.5(LYA)/88(LYC)

91.1

(3.6

)

(QUILL TRAVEL)

(X-A

XIS

TRAV

EL)

(Z-AXIS TRAVEL)

(TAIL STOCK TRAVEL)

68 (2.7)(LYA) / 84.5 (3.3)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)

80 (3.1)

560 (22.0)80

205

(8.1

)

20 (0

.8)

185

(7.3

)

560 (22.0)

2 (0

.1)(

OT) 10

(0.4)(OT)

7 (0

.3)

29(1.1)

81.5 (3.2)

69.5(2.7) (3.5) (3.1)

(LYA)/88(LYC)

55 (2.2

)

(QUILL TRAVEL)

(X-A

XIS

TRAV

EL)

(Z-AXIS TRAVEL)

(TAIL STOCK TRAVEL)

68 (2.7)(LYA) / 84.5 (3.3)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)

80 (3.1)

560 (22.0)

560 (22.0)

205

(8.1

)

29(1.1)

81.5 (3.2)

(2.7) (3.5) (3.1)80

10(0.4)

(OT)

2 (0

.1)(

OT)

56 (2

.2)1

49 (5

.9)

43 (1

.7)

69.5(LYA)/88(LYC)

91.1

(3.6

)

(QUILL TRAVEL)

(X-A

XIS

TRAV

EL)

(Z-AXIS TRAVEL)

(TAIL STOCK TRAVEL)

68 (2.7)(LYA) / 84.5 (3.3)(LYC)46 (1.8)(LYA) / 27.5 (1.1)(LYC)

Triple ID Tool Triple ID Tool

13

Working Range

190(LSYA)/208.5(LSYC) 560 (22.0)

560 (22.0)

205

(8.1

)

30 (1

.2)1

75 (6

.9)

117 66 125

2 (0.1

)(O

T)

10(0.4)

(OT)

5 (0

.2)

113

(4.4

)

65 (2.6

)

(X-A

XIS

TRAV

EL)

(B-AXIS TRAVEL)

(Z-AXIS TRAVEL)

46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)65 (2.6)(LSYA) / 83.5 (3.3)(LSYC)

(7.5) (8.2)

(4.6) (2.6) (4.9)

560 (22.0)

(0.4)

(0.1

)

560 (22.0)

205

(8.1

)

20 (0

.8)

185

(7.3

)

124(4.9) (1.9) (5.2)

(3.1)

47 133

(2.2

)


190(LSYA)/208.5(LSYC)(7.5) (8.2)

(4.9) (1.4) (4.8)

10(OT)(0.4)

2(0

.1)(

OT)

560 (22.0)(Z-AXIS TRAVEL)

205

(8.1

)(X

-AXI

S TR

AVEL

)

560 (22.0)(B-AXIS TRAVEL)

46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)

190(LSYA)/208.5(LSYC)(7.5) (8.2)

56 (2

.2)

149

(5.8

)

21 (0

.8)

12 (0

.4)

101

(3.9

)

124 37 122

91 (3.5

)

68 (2.6)(LSYA) / 86.5 (3.4)(LSYC)

22 (0.9)

10(OT)2

(0.1

)(O

T)560 (22.0)

118(4.6) (2.6) (5.7)

65 145

73 (2

.9)

5 (0

.2)17

5 (6

.9)

30 (1

.2)20

5 (8

.1)

190(LSYA)/208.5(LSYC)

65

560 (22.0)

(0.4)

(2.6

)5

(0.2

)

(Z-AXIS TRAVEL)

(B-AXIS TRAVEL)

(X-A

XIS

TRAV

EL)


(7.5) (8.2)

78

65

140

190(LSYA)/208.5(LSYC)

2

10(OT)

105(4.1) (3.1) (5.5)

106

(4.2

)

(0.1

)(O

T)

560 (22.0)

5 (0

.2)17

5 (6

.9)

30 (1

.2)20

5 (8

.1)

560 (22.0)

(0.4)

(2.6

)

(Z-AXIS TRAVEL)

(B-AXIS TRAVEL)

(X-A

XIS

TRAV

EL)


(7.5) (8.2)190(LSYA)/208.5(LSYC) 560 (22.0)

85 (3.3

)

560 (22.0)

10 (0.4) (OT)

2(0

.1)(O

T)

205

(8.1

)

50 (2

.0)

155

(6.1

)

141 (5.6) (1.7)(1.8)

43 46

14 (0

.6)

121

(4.8

)

(X-A

XIS

TRAV

EL)

(B-AXIS TRAVEL)

(Z-AXIS TRAVEL)


(7.5) (8.2)

10(OT)

2(O

T)16 (0.6

)

48(1

.9)

55

77.55

65(2

.6) 29

(1.1

)

393

(X-A

XIS

TRAV

EL)

(B-AXIS TRAVEL)

(Z-AXIS TRAVEL)

(0.1

)(3

.7)

Lynx 220LSYA / LSYC

ID Tool Double ID Tool

190(LSYA)/208.5(LSYC) 560 (22.0)

560 (22.0)

205

(8.1

)

30 (1

.2)1

75 (6

.9)

117 66 125

2 (0.1

)(O

T)

10(0.4)

(OT)

5 (0

.2)

113

(4.4

)

65 (2.6

)

(X-A

XIS

TRAV

EL)

(B-AXIS TRAVEL)

(Z-AXIS TRAVEL)


(7.5) (8.2)

(4.6) (2.6) (4.9)

560 (22.0)

(0.4)

(0.1

)

560 (22.0)

205

(8.1

)

20 (0

.8)

185

(7.3

)

124(4.9) (1.9) (5.2)

(3.1)

47 133

(2.2

)


190(LSYA)/208.5(LSYC)(7.5) (8.2)

(4.9) (1.4) (4.8)

10(OT)(0.4)

2(0

.1)(

OT)


205

(8.1

)(X

-AXI

S TR

AVEL

)


46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)

190(LSYA)/208.5(LSYC)(7.5) (8.2)

56 (2

.2)

149

(5.8

)

21 (0

.8)

12 (0

.4)

101

(3.9

)

124 37 122

91 (3.5

)

68 (2.6)(LSYA) / 86.5 (3.4)(LSYC)

22 (0.9)

10(OT)

2 (0

.1)(

OT)

560 (22.0)

118(4.6) (2.6) (5.7)

65 145

73 (2

.9)

5 (0

.2)17

5 (6

.9)

30 (1

.2)20

5 (8

.1)

190(LSYA)/208.5(LSYC)

65

560 (22.0)

(0.4)

(2.6

)5

(0.2

)

(Z-AXIS TRAVEL)

(B-AXIS TRAVEL)

(X-A

XIS

TRAV

EL)


(7.5) (8.2)

78

65

140

190(LSYA)/208.5(LSYC)

2

10(OT)

105(4.1) (3.1) (5.5)

106

(4.2

)

(0.1

)(O

T)

560 (22.0)

5 (0

.2)17

5 (6

.9)

30 (1

.2)20

5 (8

.1)

560 (22.0)

(0.4)

(2.6

)

(Z-AXIS TRAVEL)

(B-AXIS TRAVEL)

(X-A

XIS

TRAV

EL)


(7.5) (8.2)190(LSYA)/208.5(LSYC) 560 (22.0)

85 (3.3

)

560 (22.0)

10 (0.4) (OT)

2(0

.1)(O

T)

205

(8.1

)

50 (2

.0)

155

(6.1

)

141 (5.6) (1.7)(1.8)

43 46

14 (0

.6)

121

(4.8

)

(X-A

XIS

TRAV

EL)

(B-AXIS TRAVEL)

(Z-AXIS TRAVEL)


(7.5) (8.2)

10(OT)

2(O

T)16 (0.6

)

48(1

.9)

55

77.55

65(2

.6) 29

(1.1

)

393

(X-A

XIS

TRAV

EL)

(B-AXIS TRAVEL)

(Z-AXIS TRAVEL)

(0.1

)(3

.7)

Triple ID Tool Face Tool

190(LSYA)/208.5(LSYC)

205

(8.1

)

16 (0

.6)

189

(7.4

)

19 (0

.7)

130

(5.1

)

125(4.9) (2.3)(2.8)

58 70

51 (2.0

)

2(0

.1)(

OT)

10(0.4)

(OT)

560 (22.0)


(B-AXIS TRAVEL)

(X-A

XIS

TRAV

EL)


(7.5) (8.2)

6030

(1.2

)(2.4

)

124 59 137

48 (1

.9)

10(OT)

190(LSYA)/208.5(LSYC) 560 (22.0)

560 (22.0)

205

(8.1

)

(4.9) (2.3) (5.4)

55 (2

.2)

150

(5.9

)

20 (0

.8)

(0.4)

2(0

.1)(

OT)

(Z-AXIS TRAVEL)

(X-A

XIS

TRAV

EL)

(B-AXIS TRAVEL)


(7.5) (8.2)

2 (0.1

)(O

T)

10(0.4)

(OT)

123(4.8) (1.9) (5.5)

48 140

565 (22.2)

190(LSYA)/208.5(LSYC)

205

(8.1

)

60 (2

.4)

145

(5.7

)

24 (0

.9)

3 (0

.1)

48 (1

.9)

95 (3.7

)

560 (22.0)

(Z-AXIS TRAVEL)

(B-AXIS TRAVEL)

(X-A

XIS

TRAV

EL)


(7.5) (8.2)

560 (22.0)190(LSYA)/208.5(LSYC)

560 (22.0)

205

(8.1

)

1378697(3.8) (3.4) (5.4)

55 (2

.2)

150

(5.9

)

20 (0

.8)

78 (3.1

)

10(0.4)

(OT)

2(0

.1)(

OT)

6030

(2.4

)(1

.2)

(X-A

XIS

TRAV

EL)

(B-AXIS TRAVEL)

(Z-AXIS TRAVEL)


(7.5) (8.2)

2 (0.1

)(O

T)

10(0.4)

(OT)

123(4.8) (1.9) (5.5)

48 140

60 (2

.4)

145

(5.7

)

24 (0

.9)

3 (0

.1)

48 (1

.9)

95 (3.7

)



205

(8.1

)(X

-AXI

S TR

AVEL

)


190(LSYA)/208.5(LSYC)(7.5) (8.2)

12 (0.5)

OD Tool

14

unit : mm (inch)

unit : mm (inch)

190(LSYA)/208.5(LSYC) 560 (22.0)

560 (22.0)

205

(8.1

)

30 (1

.2)1

75 (6

.9)

117 66 125

2 (0.1

)(O

T)

10(0.4)

(OT)

5 (0

.2)

113

(4.4

)

65 (2.6

)

(X-A

XIS

TRAV

EL)

(B-AXIS TRAVEL)

(Z-AXIS TRAVEL)


(7.5) (8.2)

(4.6) (2.6) (4.9)

560 (22.0)

(0.4)

(0.1

)

560 (22.0)

205

(8.1

)

20 (0

.8)

185

(7.3

)

124(4.9) (1.9) (5.2)

(3.1)

47 133

(2.2

)


190(LSYA)/208.5(LSYC)(7.5) (8.2)

(4.9) (1.4) (4.8)

10(OT)(0.4)

2(0

.1)(

OT)


205

(8.1

)(X

-AXI

S TR

AVEL

)


46 (1.8)(LSYA) / 27.5 (1.1)(LSYC)

190(LSYA)/208.5(LSYC)(7.5) (8.2)

56 (2

.2)

149

(5.8

)

21 (0

.8)

12 (0

.4)

101

(3.9

)

124 37 122

91 (3.5

)

68 (2.6)(LSYA) / 86.5 (3.4)(LSYC)

22 (0.9)

10(OT)

2 (0

.1)(

OT)

560 (22.0)

118(4.6) (2.6) (5.7)

65 145

73 (2

.9)

5 (0

.2)17

5 (6

.9)

30 (1

.2)20

5 (8

.1)

190(LSYA)/208.5(LSYC)

65

560 (22.0)

(0.4)

(2.6

)5

(0.2

)

(Z-AXIS TRAVEL)

(B-AXIS TRAVEL)

(X-A

XIS

TRAV

EL)


(7.5) (8.2)

78

65

140

190(LSYA)/208.5(LSYC)

2

10(OT)

105(4.1) (3.1) (5.5)

106

(4.2

)

(0.1

)(O

T)

560 (22.0)

5 (0

.2)17

5 (6

.9)

30 (1

.2)20

5 (8

.1)

560 (22.0)

(0.4)

(2.6

)

(Z-AXIS TRAVEL)

(B-AXIS TRAVEL)

(X-A

XIS

TRAV

EL)


(7.5) (8.2)190(LSYA)/208.5(LSYC) 560 (22.0)

85 (3.3

)

560 (22.0)

10 (0.4) (OT)

2(0

.1)(O

T)

205

(8.1

)

50 (2

.0)

155

(6.1

)

141 (5.6) (1.7)(1.8)

43 46

14 (0

.6)

121

(4.8

)

(X-A

XIS

TRAV

EL)

(B-AXIS TRAVEL)

(Z-AXIS TRAVEL)


(7.5) (8.2)

10(OT)

2(O

T)16 (0.6

)

48(1

.9)

55

77.55

65(2

.6) 29

(1.1

)

393

(X-A

XIS

TRAV

EL)

(B-AXIS TRAVEL)

(Z-AXIS TRAVEL)

(0.1

)(3

.7)

Angular Milling Angular Milling (offset)

190(LSYA)/208.5(LSYC)

205

(8.1

)

16 (0

.6)

189

(7.4

)

19 (0

.7)

130

(5.1

)

125(4.9) (2.3)(2.8)

58 70

51 (2.0

)

2(0

.1)(

OT)

10(0.4)

(OT)

560 (22.0)


(B-AXIS TRAVEL)

(X-A

XIS

TRAV

EL)


(7.5) (8.2)

6030

(1.2

)(2.4

)

124 59 137

48 (1

.9)

10(OT)

190(LSYA)/208.5(LSYC) 560 (22.0)

560 (22.0)

205

(8.1

)

(4.9) (2.3) (5.4)

55 (2

.2)

150

(5.9

)

20 (0

.8)

(0.4)

2(0

.1)(

OT)

(Z-AXIS TRAVEL)

(X-A

XIS

TRAV

EL)

(B-AXIS TRAVEL)


(7.5) (8.2)

2 (0.1

)(O

T)

10(0.4)

(OT)

123(4.8) (1.9) (5.5)

48 140

565 (22.2)

190(LSYA)/208.5(LSYC)

205

(8.1

)

60 (2

.4)

145

(5.7

)

24 (0

.9)

3 (0

.1)

48 (1

.9)

95 (3.7

)

560 (22.0)

(Z-AXIS TRAVEL)

(B-AXIS TRAVEL)

(X-A

XIS

TRAV

EL)


(7.5) (8.2)

560 (22.0)190(LSYA)/208.5(LSYC)

560 (22.0)

205

(8.1

)

1378697(3.8) (3.4) (5.4)

55 (2

.2)

150

(5.9

)

20 (0

.8)

78 (3.1

)

10(0.4)

(OT)

2(0

.1)(

OT)

6030

(2.4

)(1

.2)

(X-A

XIS

TRAV

EL)

(B-AXIS TRAVEL)

(Z-AXIS TRAVEL)


(7.5) (8.2)

2 (0.1

)(O

T)

10(0.4)

(OT)

123(4.8) (1.9) (5.5)

48 140

60 (2

.4)

145

(5.7

)

24 (0

.9)

3 (0

.1)

48 (1

.9)

95 (3.7

)



205

(8.1

)(X

-AXI

S TR

AVEL

)


190(LSYA)/208.5(LSYC)(7.5) (8.2)

12 (0.5)

Double OD Tool (Main)

190(LSYA)/208.5(LSYC)

205

(8.1

)

16 (0

.6)

189

(7.4

)

19 (0

.7)

130

(5.1

)

125(4.9) (2.3)(2.8)

58 70

51 (2.0

)

2(0

.1)(

OT)

10(0.4)

(OT)

560 (22.0)


(B-AXIS TRAVEL)

(X-A

XIS

TRAV

EL)


(7.5) (8.2)

6030

(1.2

)(2.4

)

124 59 137

48 (1

.9)

10(OT)

190(LSYA)/208.5(LSYC) 560 (22.0)

560 (22.0)

205

(8.1

)

(4.9) (2.3) (5.4)

55 (2

.2)

150

(5.9

)

20 (0

.8)

(0.4)

2(0

.1)(

OT)

(Z-AXIS TRAVEL)

(X-A

XIS

TRAV

EL)

(B-AXIS TRAVEL)


(7.5) (8.2)

2 (0.1

)(O

T)

10(0.4)

(OT)

123(4.8) (1.9) (5.5)

48 140

565 (22.2)

190(LSYA)/208.5(LSYC)

205

(8.1

)

60 (2

.4)

145

(5.7

)

24 (0

.9)

3 (0

.1)

48 (1

.9)

95 (3.7

)

560 (22.0)

(Z-AXIS TRAVEL)

(B-AXIS TRAVEL)

(X-A

XIS

TRAV

EL)


(7.5) (8.2)

560 (22.0)190(LSYA)/208.5(LSYC)

560 (22.0)

205

(8.1

)

1378697(3.8) (3.4) (5.4)

55 (2

.2)

150

(5.9

)

20 (0

.8)

78 (3.1

)

10(0.4)

(OT)

2(0

.1)(

OT)

6030

(2.4

)(1

.2)

(X-A

XIS

TRAV

EL)

(B-AXIS TRAVEL)

(Z-AXIS TRAVEL)


(7.5) (8.2)

2 (0.1

)(O

T)

10(0.4)

(OT)

123(4.8) (1.9) (5.5)

48 140

60 (2

.4)

145

(5.7

)

24 (0

.9)

3 (0

.1)

48 (1

.9)

95 (3.7

)



205

(8.1

)(X

-AXI

S TR

AVEL

)


190(LSYA)/208.5(LSYC)(7.5) (8.2)

12 (0.5)

Double OD Tool [Main / Sub] Straight Milling

190(LSYA)/208.5(LSYC)

205

(8.1

)

16 (0

.6)

189

(7.4

)

19 (0

.7)

130

(5.1

)

125(4.9) (2.3)(2.8)

58 70

51 (2.0

)

2(0

.1)(

OT)

10(0.4)

(OT)

560 (22.0)


(B-AXIS TRAVEL)

(X-A

XIS

TRAV

EL)


(7.5) (8.2)

6030

(1.2

)(2.4

)

124 59 137

48 (1

.9)

10(OT)

190(LSYA)/208.5(LSYC) 560 (22.0)

560 (22.0)

205

(8.1

)

(4.9) (2.3) (5.4)

55 (2

.2)

150

(5.9

)

20 (0

.8)

(0.4)

2(0

.1)(

OT)

(Z-AXIS TRAVEL)

(X-A

XIS

TRAV

EL)

(B-AXIS TRAVEL)


(7.5) (8.2)

2 (0.1

)(O

T)

10(0.4)

(OT)

123(4.8) (1.9) (5.5)

48 140

565 (22.2)

190(LSYA)/208.5(LSYC)

205

(8.1

)

60 (2

.4)

145

(5.7

)

24 (0

.9)

3 (0

.1)

48 (1

.9)

95 (3.7

)

560 (22.0)

(Z-AXIS TRAVEL)

(B-AXIS TRAVEL)

(X-A

XIS

TRAV

EL)


(7.5) (8.2)

560 (22.0)190(LSYA)/208.5(LSYC)

560 (22.0)

205

(8.1

)

1378697(3.8) (3.4) (5.4)

55 (2

.2)

150

(5.9

)

20 (0

.8)

78 (3.1

)

10(0.4)

(OT)

2(0

.1)(

OT)

6030

(2.4

)(1

.2)

(X-A

XIS

TRAV

EL)

(B-AXIS TRAVEL)

(Z-AXIS TRAVEL)


(7.5) (8.2)

2 (0.1

)(O

T)

10(0.4)

(OT)

123(4.8) (1.9) (5.5)

48 140

60 (2

.4)

145

(5.7

)

24 (0

.9)

3 (0

.1)

48 (1

.9)

95 (3.7

)



205

(8.1

)(X

-AXI

S TR

AVEL

)


190(LSYA)/208.5(LSYC)(7.5) (8.2)

12 (0.5)

15

Tooling System

16

Lynx 220Y / LY

ø32 (1.3)

ø20 (0.8)

Boring Bar

StraightMilling Head

AngularMilling Head

O.D Tool Head

O.D Tool

Collet Adapter

Milling ArborAdapter

Milling Collet

Weldon Adapter

Boring Bar

Drill

Boring Bar Sleeves

Boring Bar Sleeves II ø8 (0.3) ø12 (0.5) ø10 (0.4) ø16 (0.6)

Drill SocketMT #1MT #2MT #3

U-Drill

O.D Tool

Cutting Tool

U-Drill Cap

24 station Turret(BMT 45P)

I.D Tool Holder

Face Tool Holder

U-Drill Sleevesø20 (0.8)ø25 (1.0)

ER20Ø2~Ø13 (1/16~8/16)

ø32 (1.3)

□20 (0.8)

□20 (0.8)

Double O.D Tool Holder (F)□20 (0.8)

Cut-Off Tool Holder□20 (0.8)

Triple I.D Tool Holderø20 (0.8)

□20 (0.8)

ø10 (0.4) ø20 (0.8)ø12 (0.5) ø25 (1.0)

ø16 (0.6)ø32 (1.3)

Standard

opt.

unit : mm (inch)

17

Lynx 220LSY

ø32 (1.3)

ø20 (0.8)

Boring Bar

StraightMilling Head

Angular(offset)Milling Holder

AngularMilling Head

O.D Tool Head

O.D Tool

Collet Adapter

Milling ArborAdapter

Milling Collet

Weldon Adapter

Boring Bar

Drill

Boring Bar Sleeves

Boring Bar Sleeves II

Drill SocketMT #1MT #2MT #3

U-Drill

Cutting Tool

U-Drill Cap

24 station Turret(BMT 45P)

I.D Tool Holder


ø32 (1.3)

ER20Ø2~Ø13(1/16~8/16)

ø32 (1.3)

□20 (0.8)

Double O.D Tool Holder (R+L)□20 (0.8)

Double O.D Tool Holder (F)□20 (0.8)

Double O.D Tool Holder (R)□20 (0.8)

Cut-Off Tool Holder□20 (0.8)

Double I.D Tool Holderø20 (0.8)

Triple I.D Tool Holderø20 (0.8)

□20 (0.8)

U-Drill

U-Drill Cap


O.D Tool

Face Tool Holder□20 (0.8)

ø10 (0.4) ø20 (0.8)ø12 (0.5) ø25 (1.0)ø16 (0.6)

ø10 (0.4) ø16 (0.6)ø12 (0.5) ø20 (0.8)

Standard

opt.

opt.

unit : mm (inch)

18

Machine Specifications

Description Unit Lynx 220YA Lynx 220YC Lynx 220LYA Lynx 220LYC Lynx 220LSYA Lynx 220LSYC

Capacity

Swing over bed mm (inch) 600 (23.6)Swing over saddle mm (inch) 400 (15.7)Recom. Turning diameter mm (inch) 170 (6.7) 210 (8.3) 170 (6.7) 210 (8.3) 170 (6.7) 210 (8.3)Max. Turning diameter mm (inch) 300 (11.8)Max. Turning length mm (inch) 300 (11.8) 510 (20.1)Chuck size inch 6 8 6 8 6 8Bar working diameter mm (inch) 51 (2.0) 65 (2.6) 51 (2.0) 65 (2.6) 51 (2.0) 65 (2.6)

Travels

Travel distance X-axis mm (inch) 205 (8.1)Z-axis mm (inch) 350 (13.8) 560 (22.0)Y-axis mm (inch) 105 (±52.5) (4.1 (±2.1))C1, C2-axis mm (inch) 360 (in 0.001) (14.2)

Feedrate

Rapid Traverse Rate X-axis m/min (ipm) 30 (1181.1)Z-axis m/min (ipm) 36 (1417.3)Y-axis m/min (ipm) 10 (393.7)C-axis m/min (ipm) 200 (7874.0)

Main spindle

Max. Spindle speed r/min 6000 4500 6000 4500 6000 4500Spindle nose ASA A2-5 A2-6 A2-5 A2-6 A2-5 A2-6Spindle bearing diameter (Front) mm (inch) 90 (3.5) 110 (4.3) 90 (3.5) 110 (4.3) 90 (3.5) 110 (4.3)Spindle through hole mm (inch) 61 (2.4) 76 (3.0) 61 (2.4) 76 (3.0) 61 (2.4) 76 (3.0)Min. spindle Indexing angle (C-axis) deg 0.001

Turret

No. of tool stations ea 12 (24 Position Index)OD tool size mm (inch) 20 x 20 (0.8 x 0.8)Max. boring bar size mm (inch) 32 / 20 (1.3 / 0.8)Turret Indexing time (1 station swivel) s 0.11

Max. Rotary tool speed r/min 6000

Tail StockQuill diameter mm (inch) - - 65 (2.6) - -Quill bore taper MT - - #4 - -Quill travel mm (inch) - - 80 (3.1) - -

Sub spindle

Spindle speed r/min - - - - 6000Spindle nose FLAT - - - - Ø110Spindle bearing diameter (Front) mm (inch) - - - - 70 (2.8)Spindle through hole mm (inch) - - - - 43 (1.7)Min. spindle Indexing angle (C-axis) deg - - - - 0.001

Motors

Main spindle motor power (30min / cont.) kW (Hp) 15 / 11 (20.1 / 14.8)

Sub spindle motor power kW (Hp) - - - - 5.5 / 3.7 (7.4 / 5.0)Rotary tool motor power kW (Hp) 3.7 (5.0)Coolant pump motor power kW (Hp) 0.4 (0.5)

Power source

Electric power supply(rated capacity) kVA 27.8 33.7

Machine Dimensions

Height mm (inch) 1920 (75.6)Width mm (inch) 1710 (67.3)Depth mm (inch) 2425 (95.5) 2455 (96.7) 2850 (112.2) 2880 (113.4) 2850 (112.2) 2880 (113.4)Weight kg (Ib) 3400 (7495.6) 3500 (7716.1) 3900 (8597.9) 4000 (8818.4) 3900 (8597.9) 4000 (8818.4)

NC CONTROL DOOSAN Fanuc i series

• Coolant supply equipment

• Foot switch

• Front door interlock

• Full enclosure chip and coolant shield

• Hand tool kit (including small tool for operations)

• Hydraulic chuck and actuating cylinder (tool holders & boring sleeves)

• Hydraulic power unit

• Levelling jack screw and plates

• Lubrication equipment

• Soft jaws

• Standard tooling kit

• Sub spindle (Lynx 220 LSYA / LSYC)

• Tail stock (Lynx 220 LYA / LYC)

• Work light

• Workpiece cut off confirmation (electrical type) (Lynx 220 LSYA / LSYC)

Standard features

• The specifications and information above-mentioned may be changed without prior notice.• For more details, please contact Doosan

• Coolant chiller

• Hardened & ground jaws

• Mist collector

• Oil skimmer

• Parts catcher (Lynx 220 : ø 65 x L140)

• Pressure switch for chucking pressure check

• Programmable Tail stock (Lynx 220 LYA / LYC)

• Proximity switches for chuck clamp detection

• Proximity switches for tail stock quill position detection*1

• Signal tower (yellow, red, green)

• Special chucks

• Tool pre-setter (Electric type)

• Tool pre-setter (manual type)

• Additional tool holders & sleeves

• Air blast for chuck jaw cleaning

• Air gun

• Automatic door

• Automatic measuring system (in process touch probe)

• Automatic power off

• Automatic work loading

• Bar feeder interface

• Chip conveyor

• Chip bucket*1 : This is available as option when tail stock

is applied to the machine.

Optional features

19

NC Unit Specifications DOOSAN Fanuc i series

AXES CONTROL- Controlled path 1 path [2 path]- Controlled axes X, Z, C, Y [C2, B]- Simultaneous controlled axes 4 axes- Angular axis control - Axis control by PMC - Backlash compensation 0 ~ ±9999 pulses- Backlash compensation for each - Chamfering on / off - Chuck and tail stock barrier - Cs contouring control - HRV2 control - Least input command 0.001 / 0.0001 mm/inch- Machine lock All axis / each axis- Mirror image - Overtravel - Rapid traverse and cutting feed - Stored pitch error compensation - Stored stroke check 1 - Stored stroke 2 and 3 - Stroke limit check before move - Torque control - Unexpected disturbance torque detection function

OPERATION- Automatic operation (memory) - DNC Operation (Reader / puncher interface is required)

- DNC Operation with Memory card - Dry run - Handle incremental feed X1, X10, X100- JOG feed - MDI operation - Manual handle feed 1unit- Manual intervention and return - Manual reference position return - Program number search - Program restart - Refernce position setting without dog - Reference position shift - Sequence number search - Single block - Wrong operation prevention

INTERPOLATION FUNCTIONS- 1st. Reference position return Manual, G28- 2nd. reference position return G30- 3rd / 4th reference point reurn - Circular interpolation G02- Continuous threading - Cylindrical interpolation - Dwell (per sec) G04- Helical interpolation - Linear interpolation G01- Multiple threading - Nano interpolation - Polygon machining with two spindle - Polar coordinate interpolation - Positioning G00- Reference position return check G27- Skip G31- Thread cutting / Synchronous cutting - Thread cutting retract - Torque limit skip - Variable lead threading

FEED FUNCTION- Automatic acceleration / deceleration - Cutting feedrate clamp - Feedrate override (10% unit) 0 - 200 %- Jog feed override (10% unit) 0 - 2000 mm/min- Override cancel - Rapid traverse override F0, 25, 100 %

AUXILIARY / SPINDLE SPEED FUNCTION - Actual spindle speed output- Auxiliary function lock- Constant surface speed control- M-code function- Multi spindle control- Rigid tapping- S-code function- Spindle orientation- Spindle serial output- Spindle speed override- [Spindle sychronous control]

PROGRAM INPUT- Absolute / incremental programming - Addition of custom macro common variables

#100~#199,#500~#999- Automatic coordinate system setting - Canned cycle for drilling / Turning - Circular interpolation by R programming - Coordinate system setting G50- Custom macro - Diameter/radius programming (X axis) - Direct drawing dimension programming - Direct input of coordinate system shift - G code system A / B / C - Interruption type custom macro - Label skip - Macro executor - Manual absolute on and off - Maximum program dimension ±9 digit- Multiple repetitive canned cycle G70 - G76- Multiple repetitive canned cycle II - Optional block skip 9 piece- Pattern data input - Parity check - Plane selection G17, G18, G19- Pocket calculator type decimal point programming - Program file name 32 characters- Program stop / end (M00, M01 / M02, M30) - Programmable data input G10- Sequence number N8 digit- SUB program call 10 folds nested- Work coordinate system G52-G59

TOOL FUNCTION / TOOL COMPENSATION- Automatic tool offset - T-code function T2+2 digits- Tool geometry / wear compensation - Tool life management - Tool Load Monitoring system * - Tool nose radius compensation - Tool offset G43, G44, G49- Tool offset pairs ±6 digits : 64 [128] pairs- Tool offset value counter input - Y-axis offset

EDITING OPERATION- Number of registered programs 400 [800] ea- Part program editing - Part program storage size

1280m (512kB) [ 2560m (1MB) ] - Play back

SETTING AND DISPLAY- Alarm history display - Multi-language display - Operating monitor screen - Program comment display 31 characters- Run hours / part count display - Self-diagnosis function - Soft operator's panel - Tool path graphic display

DATA INPUT / OUTPUT- External work number search 15 points- Memory card input / output - RS232C interface - Screen hard copy

OTHERS- Cycle start and lamp- Display unit- Feed hold and lamp- MDI unit- NC and servo ready- PCMCIA port in the front of LCD display unit- PMC system- USB port in the front of LCD display unit

INTERFACE FUNCTION- Ethernet function Embedded ethernet

OPERATION GUIDANCE FUNCTION - EZ Guidei (Conversational Programming Solution)- EZ Operation package

OPTIONAL SPECIFICATIONS

INTERPOLATION FUNCTIONS- Multi step skip

FEED FUNCTION- Advanced preview control

TOOL FUNCTION / TOOL COMPENSATION- Tool offset pairs 99 [200] pairs

DATA INPUT / OUTPUT- Fast ethernet / Data server- Automatic data backup

OPERATION- Manual handle feed 2unit- Manual handle interruption- Part program storage size 5120m (2MB)

ROBOT INTERFACE- Robot interface with PMC I / O module (Hardware between PMC I / O modules)- Robot interface with PROFIBUS-DP

[ ] : LYNX 220LSY only* : According to the business contract made Doosan,

some regions haveTool Load Monitoring system as option.

Head OfficeDoosan Tower 20th FL., 18-12, Euljiro-6Ga, Jung-Gu, Seoul, Korea 100-730 Tel : ++82-2-3398-8693 / 8671 / 8680 Fax : ++82-2-3398-8699

Doosan Infracore America Corp.19A Chapin Rd. Pine Brook, NJ 07058, U.S.A. Tel : ++1-973-618-2500 Fax : ++1-973-618-2501

Doosan Infracore Germany GmbHEmdener Strasse 24 D-41540 Dormagen Germany Tel : ++49-2133-5067-100 Fax : ++49-2133-5067-001

Doosan Infracore Yantai Co., LTD13 Building, 140 Tianlin Road, Xuhui District, Shanghai, China (200233) Tel : ++86-21-6440-3384 (808, 805) Fax : ++86-21-6440-3389

- The specifications and information above-mentioned may be changed without prior notice.- For more details, please contact Doosan.

EN 140829SU

http://www.doosaninfracore.com/machinetools/

Documents

High-productivity Compact Turning Center Added with Y … · High-productivity Compact Turning Center ... CNC turning center. If a user ... Programming G Code list M Code list