High Security Locking Systems - ASSA ABLOY UK · High Security Locks for External Environments for perimeter security ... and maintains custodial locks, doors, fixtures, fittings

High Security Locking SystemsTechnical Overview

Product Catalogue

High Security & Safety Group - Kaye Range

Contents

3

4

5 - 7

8 - 10

11 - 13

14 - 16

17 - 19

20 - 22

23 - 25

26

27 - 28

29 - 31

32 - 34

35 - 37

38 - 40

41 - 43

44 - 45

46 - 47

48 - 49

Introduction

Terminology & Lock Features

HS110 & HS120 Surface Mounted Emergency/Panic Escape Locks

HS130 & HS140 Surface Mounted Specialised Function Locks

HS150 & HS160 Surface Mounted Specialised Function Locks

HS170 Surface Mounted Lock for use with Access Control Systems

HS180 Surface Mounted Specialised Function Lock

Kaye Dual Solenoid Surface Mount High Security Multipoint Locking System

Ancillory Items

Top, Centre and Floor Keeps

HS9080 Slide Bolt

HS210 & HS220 Mortice Mounted Emergency/Panic Escape Locks

HS230 & HS240 Mortice Mounted Specialised Function Locks

HS250 & HS260 Mortice Mounted Specialised Function Locks

HS270 Mortice Mounted Lock for use with Access Control Systems

HS280 Mortice Mounted Specialised Function Lock

L8789 High Security External Access Control Lock

L8730 / L8731 High Security Panic Escape Claw Lock

L8715 / L8717 High Security Slide Bar Lock

Experience a safer and more open world

Product Catalogue

IntroductionHigh Security Locks/Locking

Welcome to the ASSA ABLOY High Security Locking Systems product catalogue with an overview of the comprehensive range of security products and services we offer. Kaye, an ASSA ABLOY High Security & Safety Group range, is one of the most trusted names in access control solutions. Our security solutions support a wide variety of applications.

ASSA ABLOY manufactures, installs and maintains single point and multipoint locking systems within critical national infrastructure applications, high value assets and perimeter security across the world. Available in both surface mounted and mortice versions, our high security locks are designed to the highest technical standards.

The High Security locks incorporate a number of key features including stainless steel lock cases, aesthetically pleasing colour matched lock and rod covers, cylinder guard protection and hardened steel bolts with anti-thrust prevention as standard.

The range has been specifically developed to meet the demands of physical attack, without compromising health and safety requirements. We also supply High Security Locks for External Environments for perimeter security applications.

Our products are designed on state-of-the-art CAD CAM software. Locks undergo extensive and challenging third party testing covering some of the most demanding durability and resistance to attack in order to satisfy the operational requirements of critical infrastructure. We have incorporated the many operational options required to conform to current fire safety standards and DDA regulations and will continue with further development to provide a product range tailored to our customers needs.

As with all Kaye products the High Security Multipoint Locking range is supported by our experienced customer and technical service departments.

Tested and approved to LPCB Standards, Blast & Ballistic rated and with additional HM Government approvals on selected single and double doorsets.

High Security & Safety Group also offers other specialist security products:

• Rail Locking Systems - supplies specialist security and emergencysystems for the rail industry

• Custodial Locking, Doors, F&F and Equipment Range - supplies, installsand maintains custodial locks, doors, fixtures, fittings and equipment toprisons, police custody suites and secure healthcare facilities

• Intelligent Locking Systems - supplier of digital combination locks forhigh security environments in Government and other specialist highsecurity, transport and retail applications

Our High Security Locks/Locking range is made in Great Britain.

3Experience a safer and more open world

ISO 9001

Top Rod Cover

Lock Cover

Paddle HandleAssembly

Bottom Rod Cover

Frame Keep

End Bolt

Guide Block

Top Connecting Tube

Mid Guide Block

End Cap

Lockcase

Centre BoltLatching TriggerEnd Cap

Lock Cover Screw

Mid Guide Block

Bottom Connecting Tube

Guide Block

Rod Cover Screw

Push BarAssembly

Terminology

Stainless steel lockcase

Cylinder guard protection available for various cylinders

Stainless steel forend

Hardened steel bolt

Controlled latching to assist smooth lock operation

Adjustable hardened steel bolt ends (top and bottom bolts)

Surface Mount Mortice Mount

Easy Clean Floor Keep

Lock Features

Surface Mount Mortice Mount

Independently tested to BS EN 1670 Grade 4 - Very High Corrosion Resistance

Stainless steel lockcase

Optional rod covers available

Modular lockcaseto suit panic bar,paddle handle and lever operation

Aesthetically designed lock cover

Surface mounted lock tested on fire resistant door to BS EN 1634-1

Hardened steel bolt

Security core fixing option

Non-tapered locking point

Anti-thrust prevention

Specification:

Lever Handle

Handle RoseCentre Bolt

Latching Trigger

Forend Plate

End Bolt

End Bolt Adjusterand Locknut

Easy Clean Floor Keep

Frame Keep Plate

Guide Plate

• Exit devices tested to BritishSafety Standards BS EN 1125;1997, BS EN 179; 1998

• Fire tested as part of a securedoorset to European Standard BSEN 1634

• Independently tested andapproved by the BritishGovernment

• High Security Locking used onindependent blast door testingIndependently cycle tested to inexcess of 1,000,000 cycles PanicExit Devices tested to BS EN 1125

Access Control Lock Option on models 110, 120, 170, 180, 210, 220, 270 and 280

Mortice mounted lock tested on fire resistant door to BS EN 1634-1


• Available as a single, 2, 3, 4, 5 point locking• 25mm bolt engagement, bolts automatically thrown when

door closes• Anti-thrust device to prevent any of the bolts from being forced

back allowing unauthorised access• Key controlled hold back facility operated externally or

internally as applicable (HS120 only)• Suitable for timber and steel doors• Low current consumption (access control version only)• Aesthetic Rod Covers

Options:

• Bolt Position Monitoring• Lock Position Monitoring• Key Position Monitoring• Access Control Function: 12v DC, 24v DC• Tall door kits available• External key entry overrides automatic deadlocking• High security cylinder guards• Service and Support on Installation and Maintenance

Standards:

• BS EN 179: 1998 Emergency Exit Devices (lever and paddlehandle versions)

• BS EN 1125: 1997 Panic Exit Devices (panic bar version)• CE Marked• British Government Tested• Fire tested to BS EN 1634-1• Independently cycle tested to in excess of 1,000,000 cycles• EMC Compliant

Surface Mounted Emergency/ Panic Escape LocksHS110 & HS120

The HS110 is designed to provide a surface mounted lock for emergency/panic exit doors that gives resistance to a greater physical attack threat to the outside of a door. It can provide automatic deadlocking with automatic bolting. You can choose either an internal lever handle, paddle handle or push bar to suit your operating requirements and to comply with the mandatory physical standards BS EN 179 and BS EN 1125. European standards allow the HS110 to be fitted to fire doors.

The HS120 lock has the same specification as the HS110 but incorporates a special feature to hold the bolts in their retracted position under the control of a key cylinder. This function is activated by simply turning the key towards the door edge when the bolts have been withdrawn and this will keep the bolts retracted until you reinsert the key and turn it in the opposite rotation.

Current standards do not allow the HS120 to be fitted to fire doors.

Features:



Dimensions:

Operated with either lever handle, paddle handle or push bar.


the global leader in door opening solutions

Lever Handle


Configuration Chart:


Technical Information:

Handing and Locking Chart.

BS EN 1125 - Panic Exit Devices

The main purpose of the performance requirements of this standard is to give safe and effective escape through a doorway with minimum effort and without prior knowledge of the device, i.e. for locked doors on escape routes where panic situations can be foreseen.

BS EN 179 - Paddle and Lever Handle

This European Standard deals with emergency devises designed to be used in emergency situations where people are familiar with the emergency exit and its hardware and therefore a panic situation is most unlikely to develop.

01 02

05 06

Paddle Handle (Push)

INTERNAL HANDLE

HS 120 ONLY

INTERNAL HANDLE EXTERNAL HANDLE

EXTERNAL KEY C/W CYLINDERGUARD

INTERNAL PADDLE

HS 120 ONLY

INTERNAL PADDLE EXTERNAL HANDLE

07 08

Push-Bar

INTERNAL PUSH BAR EXTERNAL HANDLE INTERNAL PUSH BAR

HS 120 ONLY

Paddle Handle (Pull)

03 04

INTERNAL PADDLE

HS 120 ONLY

INTERNAL PADDLEEXTERNAL HANDLE

BS EN 179:2008+A Classification Codes: HS110

HS120

BS EN 1125:2008+A1 2001 Classification Codes: HS110 - 37611421A

HS120 - 37601421A

BS EN 179:2008+A Classification Codes: HS110

HS120





Surface Mounted Specialised Function LocksHS130 & HS140

The HS130 lock is designed to allow manual key deadlocking operation from the outside, if required, with a number of internal locking options to cater for different needs. As standard, this lock has an automatic bolting function so the bolts engage when the door is closed allowing you to lock the door from either side manually.

The HS140 lock has the same manual key deadlocking function as the HS130 but is provided with a manual bolting operation requiring physical operation of the lever to throw the bolts into an engaged position.

Features:

• Available as a single, 2, 3, 4, 5 point locking• Manual deadlocking function• 25mm bolt engagement• Anti-thrust device to prevent any of the bolts from being

forced back allowing unauthorised access• Suitable for timber and steel doors• Aesthetic Rod Covers

Options:

• Bolt Position Monitoring• Lock Position Monitoring• Key Position Monitoring• Tall door kits available• External key entry overrides automatic deadlocking• Mechanical deadlock override via internal thumbturn with or

without breakdome or internal key cylinder• High security cylinder guards• Service and Support on Installation and Maintenance

Standards:

• CE Marked• British Government Tested• Fire tested to BS EN 1634-1• Independently cycle tested to in excess of 1,000,000 cycles



Dimensions:

Operated with lever handle.

External Cylinder Guard Internal Thumbturn






Handing and Locking Chart

01 02

05 06

INTERNAL HANDLE

INTERNAL THUMBTURN



07 08

03 04

INTERNAL HANDLE EXTERNAL HANDLE INTERNAL HANDLE EXTERNAL HANDLE



INTERNAL THUMBTURNWITH BREAKDOME

INTERNAL THUMBTURN

INTERNAL HANDLE

INTERNAL KEY INTERNAL KEY INTERNAL AND EXTERNAL KEY OPERATION

INTERNAL BLANK







The HS150 is designed to allow automatic bolting when the door is engaged within the door frame and automatic deadlocking when bolts are thrown. Once deadlocked the antitrust mechanism engages preventing the bolts from being forced back.

The HS160 is designed to allow manual bolting which is thrown by the selected furniture and automatic deadlocking when bolts are thrown. Once deadlocked the antitrust mechanism engages preventing the bolts from being forced back.

Features:

• Available as a single, 2, 3, 4, 5 point locking• Automatic deadlocking function• 25mm bolt engagement• Anti-thrust device to prevent any of the bolts from

being forced back allowing unauthorised access• Suitable for timber and steel doors• Aesthetic Rod Covers

Options:



Standards:




Dimensions:









01 02

05 06

INTERNAL HANDLE

INTERNAL THUMBTURN

INTERNAL HANDLE


07

03 04



FOR EXTERNAL OPERATION ONLY EXTERNAL HANDLE


INTERNAL HANDLE

INTERNAL KEY INTERNAL AND EXTERNAL KEY OPERATION

INTERNAL BLANK


INTERNAL THUMBTURN





• Available as a single, 2, 3, 4, 5 point locking• Automatic deadlocking function• 25mm bolt engagement, bolts automatically thrown when


back allowing unauthorised access• Access control locking• Suitable for timber and steel doors• Low current consumption (access control version only)• Aesthetic Rod Covers

Options:

• Bolt Position Monitoring• Lock Position MonitoringKey• Position Monitoring• 12 or 24v DC solenoid operation• Available in fail-safe or fail-secure modes• Tall door kits available• External key entry overrides automatic deadlocking/access

control• Mechanical deadlock or access control override via internal

thumbturn with or without breakdome or internal key cylinder• High security cylinder guards• Key controlled overlock to disable the access control• Service and Support on Installation and Maintenance

Standards:

• CE Marked• British Government Tested• Fire tested to BS EN 1634-1• Independently cycle tested to in excess of 1,000,000 cycles• EMC Compliant

Surface Mounted Lock for use with Access Control SystemsHS170

The HS170 lock has been incorporated into the range to provide a lock for use with specialised access control requirements and is available in a number of configurations to meet most applications. As standard the lock has an automatic deadlocking function with automatic bolt throw. The solenoid actuator is available with 12 or 24 volt DC operation and can be energised to lock (fail-safe if power supply is cut) or powered to unlock (fail-secure).

Features:



Dimensions:

Operated with internal lever handle.

External Cylinder Guard Internal u turn







01 02

04 05

03

INTERNAL HANDLE EXTERNAL HANDLEINTERNAL HANDLE EXTERNAL HANDLE

INTERNAL THUMBTURN

INTERNAL HANDLE

INTERNAL HANDLE EXTERNAL HANDLEFOR EXTERNAL OPERATION ONLY EXTERNAL HANDLE

INTERNAL AND EXTERNAL KEY OPERATION

INTERNAL BLANK

INTERNAL KEYINTERNAL THUMBTURNWITH BREAKDOME







door closes• Anti-thrust device to prevent any of the bolts

from being forced back allowing unauthorised access• Key controlled bolt holdback and deadlock facility• External key entry facility• High security cylinder guard• Suitable for timber and steel doors• Low current consumption (access control version only)• Aesthetic Rod Covers

Options:

• Bolt Position Monitoring• Lock Position Monitoring• Key Position Monitoring• Access Control Function: 12v DC, 24v DC• Choice of lever handle, paddle handle or push bar internal

operator• Tall door kits available• Service and Support on Installation and Maintenance

Standards:


Surface Mounted Specialised Function LockHS180

The HS180 lock incorporates several functions within the one lock case. The lock can be operated from inside with either a push bar, paddle handle or lever handle with key override from outside. In addition to this you have the facility to either lock the bolts in their retracted position or, should you wish to do so, deadlock the bolts in their thrown position. The lock also features an override function from inside however please note when the double deadlock facility is engaged the override function is disabled. When either the double deadlocking or the hold-back features are engaged it is not possible for the solenoid unlocking device to override any of these functions.

The user should be aware that this product does not conform to the mandatory standards BS EN 179 and 1125. We would strongly recommend that you consult with your local fire officer before installing this type of locking device.

Features:



Dimensions:

Operated internally with either lever handle, paddle handle or push bar.


Paddle Handle (Pull) Push-Bar



Operated internally with either lever handle, paddle handle or push bar.

Lever Handle Paddle Handle (Push)



01


INTERNAL KEY 02


INTERNAL KEY

03


INTERNAL KEY 04

INTERNAL PUSH BAR EXTERNAL HANDLE

INTERNAL KEY







The Dual Solenoid High security locking system has an access control module with full monitoring of bolts thrown and deadlock in place. Lever handles are on both sides and an optional external key facility to unlock the system when no power is available. Internal push pad or panic bar can be applied as an option but will not comply to BS EN Standards.

A second solenoid locking device is a fail-safe to over-lock the unit in a similar operation to the mechanical over-lock and holdback functions. Entry and exit are via access control signal which cuts power to the over-lock solenoid and powers up the solenoid to allow withdrawal of bolts. On closing the bolts auto throw to lock the system.

As standard the lock has an automatic deadlocking function with automatic bolt throw. If the access control systems power fails entry can be gained by a key and handle from outside. From inside the system becomes an escape system allowing the handle to withdraw the bolts and exit to take place.

Features:

• Available as a single, 2, 3, 4, 5 point locking• Automatic deadlocking function• 25mm bolt engagement, bolts automatically• Anti-thrust device to prevent any of the bolts from being

forced back allowing unauthorised access• Access control locking• Suitable for timber and steel doors• Low current consumption (access control version only)• Aesthetic Rod Covers


Options:

Standards:

• Mechanical Over-lock to secure the system out of hours, thiswould require a Key/Thumbturn operation to engage

• Bolt lock-back to provide a free swinging door• Service and Support on Installation and Maintenance



Dimensions:



Lever Handle






01 02

05 06


INTERNAL HANDLE

HS 120 ONLY


INTERNAL PADDLE

HS 120 ONLY


07 08

Push-Bar


HS 120 ONLY


03 04

INTERNAL PADDLE

HS 120 ONLY







Fixing Packs:

Description Door Thickness Order CodeCore Axing Pack 2 or 3 Point Lock 66-80mm L9031-911Core Axing Pack Single Point Lock 44-65mm L9030-901 66-80mm L9030-911Wood Screw Pack 2 or 3 Point Lock n/a L9031-900 n/a n/aWood Screw Pack Single Point Lock n/a L9030-900 n/a n/aMachine Screw Pack 2 or 3 Point Lock n/a L9031-902 n/a n/aMachine Screw Pack Single Point Lock n/a L9030-902 n/a n/a

Tall Door Kits:

Description Order Code1.0m Rod Extension L8655-912

D oor Thickness

Surface - Type 1 Surface - Type 2 Mortice - Type 1 Mortice - Type 2

Assa CylinderL9023-901-S

Abloy CylinderL9023-905-S

Assa / Abloy / Mul-T-Lock / Medeco / Kaba(External Key / Internal Key - Key Thumbturn) L9020-160-S

Assa / Abloy / Mul-T-Lock / Medeco / Kaba(External Key / Internal Blank) L9020-161-S

Assa / Abloy / Mul-T-Lock / Medeco / Kaba(External Key / Internal Key - Key Thumbturn) L9020-100-S

Assa / Abloy / Mul-T-Lock / Medeco / Kaba(External Key / Internal Blank) L9020-200-S

Assa / Abloy / Mul-T-Lock / Medeco / Kaba(External Key / Internal Breakdome) L9020-800-S

Assa / Abloy / Mul-T-Lock / Medeco / Kaba(External No Key / Internal Key Thumbturn) L9020-900-S

Assa CylinderL9023-916-S

Assa Oval Cylinder L9023-936-S

Abloy (Discpro) Cylinder L9023-917-S

Assa Cliq Cylinder L9023-922-S

Bramah Cylinder L9023-921-S

Medeco Cylinder L9023-924-S

Kaba Quattro Cylinder L9023-923-S

Locken Cylinder L9023-935-S

Winkhaus Cylinder L9023-937-S

Surface Mounted Lock Guards Mortice Lock Cylinder Guards

Ancillary ItemsFor HS100 & HS200 Series Mounted Locks

Cylinder Guards:

Cylinder Guards are tested and approved to LPCB Standards, Blast & Ballistic rated on selected single and double doorsets


Cylinder Make Overall Length

Door Thickness

Overall Length

Door Thickness

Overall Length

Door Thickness

Overall Length

Door Thickness

Union 64mm 48-54mm 74mm 55-64mm 80mm 65-74mm 90mm 75-84mmOrder Code 8-50101 8-50102 8-50103 8-50104ASSA Twin Combi 61mm 52-60mm 71mm 61-70mm 81mm 71-81mmOrder Code 8-50201 8-50202 8-50203ABLOY Protec 60mm 48-56mm 74mm 57-65mm 84mm 66-75mm 94mm 76-85mmOrder Code 8-50301 8-50302 8-50303 8-50304Yale 62mm 49-60mm 70mm 61-68mm 80mm 69-78mm 90mm 79-86mmOrder Code 8-50401 8-50402 8-50403 8-50404Kaba Expert 60mm 48-58mm 70mm 64-69mm 80mm 70-80mmOrder Code 8-50501 8-50502 8-50503Kaba 20 Profile 65mm 54-65mm 75mm 66-75mm 85mm 76-85mmOrder Code 8-50601 8-50602 8-50603


Door Thickness

Overall Length

Door Thickness

Overall Length

Door Thickness

Overall Length

Door Thickness

Union 69mm 48-59mm 78mm 60-69mmOrder Code 8-50112 8-50113ASSA Twin Combi 61mm 52-62mm 71mm 63-71mm 81mm 72-81mmOrder Code 8-50211 8-50212 8-50213ABLOY Protec 60mm 48-56mm 70mm 57-65mm 84mm 66-75mm 94mm 76-85mmOrder Code 8-50311 8-50312 8-50313 8-50314Yale 80mm 60-70mm 90mm 71-80mmOrder Code 8-50413 8-50414Kaba Expert 60mm 48-58mm 70mm 64-69mm 80mm 70-80mmOrder Code 8-50511 8-50512 8-50513Kaba 20 Profile 65mm 54-65mm 75mm 66-75mm 85mm 76-85mmOrder Code 8-50611 8-50612 8-50613


Door Thickness

Overall Length

Door Thickness

Overall Length

Door Thickness

Overall Length

Door Thickness

Union 40mm 49-59mm 45mm 60-69mm 49mm 70-77mm 53mm 78-84mmOrder Code 8-50121 8-50122 8-50123 8-50124ASSA Twin Combi 40mm 51-63mm 45mm 64-71mm 50mm 72-83mmOrder Code 8-50221 8-50222 8-50223ABLOY Protec 30mm 49-57mm 37mm 58-67mm 42mm 68-77mmOrder Code 8-50321 8-50322 8-50323Yale 40mm 66-75mmOrder Code 8-50421Kaba Expert 30mm 49-58mm 35mm 59-64mm 40mm 65-72mm 45mm 73-82mmOrder Code 8-50521 8-50522 8-50523 8-50524Kaba 20 Profile 43.5mm 54-65mm 48.5mm 66-75mm 53.5mm 76-85mmOrder Code 8-50621 8-50622 8-50623

Ancillary ItemsFor HS100 & HS200 Series Mounted Locks

Europrofile Cylinders and Thumbturns

External Key/Internal Key (for use with or without cylinder guard):

Key/Thumbturn (for use with or without cylinder guard):

External Key only (for use with or without cylinder guard):


Ancillary Items

Anti-Phishing Shroud:

Cranked Handle:

Push Pad:

Ancillary Green Dome:

Thumbturn Handle:

Straight Handle:

Push Bar:

Link Rod Spring Kit:

L9000-060-F

LH - L9050-901-S RH - L9051-901-S

L8891-921-B L8891-928-B

L9025-901-S

LH - L9000-901-S RH - L9001-901-S

L9026-901-S L8655-705-A


Top, Centre and Floor KeepsFor HS100/200 Series Locks

Steel Door Frame Keeps:

L8655-099 Frame Keep (12mm rebate)

L8655-083 Frame Keep (25mm rebate)

L9010-908 Floor Keep (Sprung)

L9011-006 Top Keep (Outward Opening)

L9011-913 Top Keep with cover (Inward Opening)

L9011-005 Centre Keep (Inward Opening)

L9011-008 Centre Keep (Outward Opening)

L9012-002 Adjustable Strike Plate (48-65mm door)

L9012-003 Adjustable Strike Plate (63-80mm door)

Floor Keeps:

L9011-901 Centre Keep (1pt and 3pt lock)(Single or double door applications)

L9012-901 Outward Opening Adjustable Base Plate

Outward Opening Timber Frame Keeps: Inward Opening Timber Frame Keeps:

L8655-181 Centre Keep (12mm rebate)

L8655-081 Centre Keep (25mm rebate)

L9011-902 Top Keep with cover

Outward/Inward Opening Timber/Steel Frame Keeps:

L9010-010 Mortice Adjustable Strike Base Plate

L9010-011 Mortice Adjustable Strike Plate(48-68 mm door)

L9010-012 Mortice Adjustable Strike Plate(68-90 mm door)

L8655-038 Floor Keep Plate


Slide BoltHS9080

To secure the passive leaf of a double door we have designed a slide bolt that will provide strength and stability against physical attack but visually match the aluminium coverofthe main lock module to give a more pleasing appearance. The bolts are available as separate units operated at the top or bottom of the door. The bolts are simply pushed up or down to secure the door using the specially designed shaped handles. When thrown or retracted the bolts are held in position by a positive detent mechanism.

Features:

• Architecturally pleasing security device to match locking products• Hardened Steel Bolt• 32mm Bolt Engagement• Bolt Diameter: 16mm

• Standard• Extended• Lockable Standard• Lockable Extended• Monitored Standard• Monitored Extended

The slide bolt has been successfully included in a door system fire tested to BS 476 Pt 22 and further assessed to cover products related to approved Document B.

Options:


Ordering:

Order Number Order Number

Top left

Standard: Standard Lockable: Standard Monitored:

Extended: Extended Lockable: Extended Monitored:

Bottom left

L9082-900-SL9087-801-S L9082-801-S

L9088-801-SL9089-801-S L9088-811-S

Top right Bottom right

Note: for Frame and Floor Keeps refer to Top, Centre and Floor Keeps page.

Slide BoltHS9080

Dimensions:

Internal View Internal View

28

L9081-900-SL9087-901-S L9081-801-S

L9088-901-SL9089-901-S L9088-911-S





L9081-900-SL9087-901-S L9081-801-S

L9088-901-SL9089-901-S L9088-911-S

L9082-900-SL9087-801-S L9082-801-S

L9088-801-SL9089-801-S L9088-811-S

Standard:Standard Lockable: Standard Monitored:





back allowing unauthorised access• Key controlled hold back facility operated externally or

internally as applicable (HS220 only)• Suitable for timber and steel doors• Stainless steel forend and bolt guide plates• Low current consumption (access control version only)

Options:

• Bolt Position Monitoring• Lock Position Monitoring• Key Position Monitoring• Access Control Function: 12v DC, 24v DC• Tall door kits available• External key entry overrides automatic deadlocking• High security cylinder guards• Service and Support on Installation and Maintenance

Standards:

• BS EN 179: 2008 Emergency Exit Devices(lever and paddle handle versions)

• BS EN 1125: 2008 Panic Exit Devices (push bar version)• CE Marked• British Government Tested• Fire tested to BS EN 1634-1• Independently cycle tested to in excess of 1,000,000 cycles• EMC Compliant

Mortice Mounted Emergency/Panic Escape LocksHS210 & HS220

The HS210 is designed to provide a mortice mounted lock for emergency/panic exit doors that gives resistance to a greater physical attack threat to the outside of a door. It can provide automatic deadlocking with automatic bolting. You can choose either an internal lever handle, paddle handle or push bar to suit your operating requirements and to comply with the mandatory physical standards BS EN 179 and BS EN 1125. European standards allow the HS210 to be fitted to fire doors.

The HS220 lock has the same specification as the HS210 but incorporates a special feature to hold the bolts in their retracted position under the control of a key cylinder. This function is activated by simply turning the key towards the door edge when the bolts have been withdrawn and this will keep the bolts retracted until you reinsert the key and turn it in the opposite rotation.

Current standards do not allow the HS220 to be fitted to fire doors.

Features:


Mortice Mounted Emergency/ Panic Escape LocksHS210 & HS220

Dimensions:

Operated with either internal lever handle, paddle handle or push bar.


Mortice Mounted Emergency/ Panic Escape LocksHS210 & HS220



Lever Handle



01 02

05 06


INTERNAL HANDLE

HS 220 ONLY



INTERNAL PADDLE

HS 220 ONLY


07 08

Push-Bar


HS 220 ONLY


03 04

INTERNAL PADDLE

HS 220 ONLY


BS EN 1125 - Panic Exit Devices

The main purpose of the performance requirements of this standard is to give safe and effective escape through a doorway with minimum effort and without prior knowledge of the device, i.e. for locked doors on escape routes where panic situations can be foreseen.

BS EN 179 - Paddle and Lever Handle

This European Standard deals with emergency devises designed to be used in emergency situations where people are familiar with the emergency exit and its hardware and therefore a panic situation is most unlikely to develop.


HS220 - 37601442A


HS120 - 37601421A

BS EN 179:2008+A1 2001 Classification Codes: HS210 - 37611441B

HS220 - 37601441B





Mortice Mounted Specialised Function LocksHS230 & HS240

The HS230 lock is designed to allow manual key deadlocking operation from the outside, if required, with a number of internal locking options to cater for different needs. As standard, this lock has an automatic bolting function so that the bolts engage when the door is closed allowing you to lock the door from either side manually.

The HS240 lock has the same manual key deadlocking function as the HS230 but is provided with a manual bolting operation requiring physical operation of the lever to throw the bolt(s) into an engaged position.

Features:

• Available as a single, 2, 3, 4, 5 point locking• Manual deadlocking function• 25mm bolt engagement• Anti-thrust device to prevent any of the bolts from

being forced back allowing unauthorised access• Suitable for timber and steel doors• Stainless steel forend and bolt guide plates

Options:



Standards:




Dimensions:


External Cylinder Guard Internal Cylinder Guard







01 02

05 06

INTERNAL HANDLE INTERNAL HANDLE

07

03 04



INTERNAL HANDLE EXTERNAL HANDLEINTERNAL HANDLE


INSIDE BLANK

EXTERNAL HANDLE





INTERNAL THUMBTURN



INTERNAL THUMBTURN



The HS250 is designed to allow automatic bolting when the door is engaged within the door frame and automatic deadlocking when bolts are thrown. Once deadlocked the antitrust mechanism engages preventing the bolts from being forced back.

The HS260 is designed to allow manual bolting which is thrown by the selected furniture and automatic deadlocking when bolts are thrown. Once deadlocked the antitrust mechanism engages preventing the bolts from being forced back.

Features:

• Available as a single, 2, 3, 4, 5 point locking• Automatic deadlocking function• 25mm bolt engagement• Anti-thrust device to prevent any of the bolts from being

forced back allowing unauthorised access• Stainless steel forend and bolt guide plates• Suitable for timber and steel doors

Options:



Standards:




Dimensions:







01 02

05 06

INTERNAL HANDLE

INTERNAL THUMBTURN

INTERNAL HANDLE


07

03 04



EXTERNAL HANDLE

INTERNALTHUMBTURNWITHBREAKDOME

INTERNAL HANDLE


INTERNAL BLANK

FOR EXTERNAL OPERATION ONLY




INTERNAL THUMBTURN





• Available as a single, 2, 3, 4, 5 point locking• Automatic deadlocking function• 25mm bolt engagement, bolts automatically thrown when

door closes• Anti-thrust device to prevent any of the bolts from being

forced back allowing unauthorised access• Access control locking• Stainless steel forend and bolt guide plates• Low current consumption (access control version only)• Suitable for timber and steel doors

Options:

• Bolt Position Monitoring• Lock Position Monitoring• Key Position Monitoring• 12, 24 or SOv DC solenoid operation• Available in fail-safe or fail-secure modes• Tall door kits available• External key entry overrides automatic deadlocking/access control• Mechanical deadlock or access control override via internal

thumbturn with or without breakdome or internal key cylinder• High security cylinder guards• Key controlled overlock to disable the access control• Service and Support on Installation and Maintenance

Standards:


Mortice Mounted Lock for use with Access Control SystemsHS270

The HS270 lock is designed for use with specialised access control requirements and is available in a number of configurations to meet most applications. As standard the lock has an automatic deadlocking function with automatic bolt throw. The solenoid actuator is available with 12 or 24 volt DC operation and can be energised to lock (fail-safe if power supply is cut) or powered to unlock (fail-secure).

Features:



Dimensions:









01 02

04 05

03

INTERNAL HANDLE EXTERNAL HANDLEINTERNAL HANDLE EXTERNAL HANDLE INTERNAL HANDLE

INTERNAL HANDLE EXTERNAL HANDLEFOR EXTERNAL OPERATION ONLY

EXTERNAL HANDLE

INTERNAL AND EXTERNAL KEY OPERATION

INSIDE BLANK

INTERNAL KEY



INTERNAL THUMBTURN





• Available as a single, 2, 3, 4, 5 point locking• 25mm bolt engagement, bolts automatically thrown when door

closes• Anti-thrust device to prevent any of the bolts

from being forced back allowing unauthorised access• Key controlled bolt holdback and deadlock facility• External key entry facility• High security cylinder guards• Stainless steel forend and bolt guide plates• Suitable for timber and steel doors• Low current consumption (access control version only)

Options:

• Bolt Position Monitoring• Lock Position Monitoring• Key Position Monitoring• Access Control Function: 12v DC, 24v DC• Choice of lever handle, paddle handle or push bar internal

operator• Tall door kits available• Service and Support on Installation and Maintenance

Standards:


Mortice Mounted Specialised Function LocksHS280

The HS280 lock incorporates several functions within the one lock case. The lock can be operated from inside with either a push bar, paddle handle or lever handle with key override from outside. There is also a facility to lock the bolts when retracted or deadlock the bolts in their thrown position. The override function is disabled when the double deadlock is engaged. It is not possible for the solenoid unlocking device to override the double deadlocking or hold-back features if they are engaged.

This product does not conform to the mandatory standards BS EN 179 and 1125. You should consult your local fire officer before installing this type of locking device.

Features:



Dimensions:



Paddle Handle (Pull) Push-Bar



01


INTERNAL KEY 02


EXTERNAL KEYC/W CYLINDERGUARD

INTERNAL KEY

03


INTERNAL KEY 04

INTERNAL PUSH BAR EXTERNAL HANDLE

INTERNAL KEY




Lever Handle Paddle Handle (Push)





• Heavy duty lock case machined from solid• Case hardened steel bolt and ram• Bolt held back when retracted• Lock automatically deadlocks on door closure• Stainless steel strike plate and lock forend• Cable connector CAT 5 point for easy access control

interface• Easy to install and maintain• Adjustable keep• Weather and corrosion resistent

Functions:

Mechanical

• Handle operation withdraws deadbolt• Deadbolt remains retracted with door in open position• Deadbolt auto throws and locks on closing door• Key/thumbturn operation to unlock

Electrical

• Access control signal to unlock• Remote blocking of mechanical key/thumbturn operation• Monitoring� Bolt throw (bolt position)� Deadlock (deadlock activation)� Key used� Key blocked (status)

Image of Cat 5 connector installation into the lock for easy access control interface.

High Security External Access Control LockL8789

Developed in co-operation with UK Government departments, for use in external environments, this Access Control lock has unique functionality and control features coupled with a robust and reliable heavy duty deadlocking mechanism ideal for high security applications.

This mortice lock can be installed in security doors / gates (steel or wood). The lock case accepts all standard Euro-profile cylinders and can be supplied with a high security cylinder guard to protect the cylinder from external attack.

Connection to in-house access control systems is quick and easy as the lock is fitted with a standard CAT 5 socket for power and signal supply.

Key blocking via an access control system allows for remote/central control operation to prevent mechanical key override of the system in the event of the key being compromised, the area requiring to be locked down or for any other reason. This would also prevent egress where a thumbturn is fitted to the inside of the door for exit purposes.

Features:

Options: • Service and Support on Installation and Maintenance


High Security External Access Control LockL8789

Dimensions:

45

Access control External locking Internal / External functionality

Order number

L8828-412-A

L8828-424-A

L8829-412-A

L8829-424-A

L8830-412-A

L8830-424-A

L8833-412-A

L8833-424-A

L8863-412-A

L8863-424-A

L8864-412-A

L8864-424-A

Access control + Key / Key Entry or Exit - Lever both sides

12vDC, KEYED BOTH SIDES, STD HANDLES BOTH SIDES c/w STRIKER

24vDC, KEYED BOTH SIDES, STD HANDLES BOTH SIDES c/w STRIKER

Access control or Key Entry / Access control or Thumbturn Breakdome Exit - Lever both sides

12vDC, KEY OUTSIDE, THUMBTURN/BREAKDOME INSIDE, STD HANDLES BOTH SIDES c/w STRIKER

24vDC, KEY OUTSIDE, THUMBTURN/BREAKDOME INSIDE, STD HANDLES BOTH SIDES c/w STRIKER

Panic Escape - Left hand Push pad opening out

12vDC, KEY/HANDLE OUTSIDE, PUSH PAD INSIDE c/w STRIKER. LH OPEN OUT

24vDC, KEY/HANDLE OUTSIDE, PUSH PAD INSIDE c/w STRIKER. LH OPEN OUT

Panic escape - Right hand Push pad opening out

12vDC, KEY/HANDLE OUTSIDE, PUSH PAD INSIDE c/w STRIKER. RH OPEN OUT

24vDC, KEY/HANDLE OUTSIDE, PUSH PAD INSIDE c/w STRIKER. RH OPEN OUT

Panic escape - Left hand Lever handle opening out

12vDC, KEY/HANDLE OUTSIDE, GREEN ESCAPE HANDLE INSIDE. LH OPEN OUT

24vDC, KEY/HANDLE OUTSIDE, GREEN ESCAPE HANDLE INSIDE. LH OPEN OUT

Panic escape - Right hand Lever handle opening out

12vDC, KEY/HANDLE OUTSIDE, GREEN ESCAPE HANDLE INSIDE. RH OPEN OUT

24vDC, KEY/HANDLE OUTSIDE, GREEN ESCAPE HANDLE INSIDE. RH OPEN OUT


• Push-pad (shielded) action to withdraw bolt• Close gate to automatically deadlock• Powerful claw engages with strike on locking• Adjustable striking plate• High visibility LED indicators� Status Red – unsecured: gate open / bolt not thrown� Status White – secured / bolt thrown

• Optional ‘lock down’ facility• ‘Lock down’ status signal• Easy to install and maintain

Options:

• Key Position Monitoring• Service and Support on Installation and Maintenance

Standards:

• Independently attack audited• 100,000 function slams in accordance with EN12209:2003• 10,000 isolation key cycles in accordance with EN12209:2003• Various other EN12209:2003 tests carried out - details available on request

High Security Panic Escape Claw LockL8730/8731

The Kaye High Security Panic Escape Claw Lock is a heavy duty, weather resistant lock fitted with a push-pad operation. The lock, which throws the bolt and automatically deadlocks on closure, is suitable for external perimeter doors / gates and high security applications.

It has a robust and solid construction designed to resist moisture. The lock is supplied with a 10mm or 20mm solid steel back-plate which is drilled and tapped ready to accept the lock fixing screws.

The emergency push pad is protected by a purpose-built metal shroud as an obstacle to mitigate manipulation from the outside. The product has undergone an extensive text program inside of the door for exit purposes.

Features:


High Security Panic Escape Claw LockL8730/8731

Dimensions:

How to select the correct handing for your new KAYE Gate Lock:

L8731Inside

L8730Inside

OutsideHINGE ON THE LEFT

250

80

298.5

323.1

OutsideHINGE ON THE RIGHT


Options:

• Mechanical option available• Lock available direct from Pickersgill-Kaye• Key Position Monitoring• Service and Support on Installation and Maintenance

Standards:

• Independently attack audited• 100,000 operations by key in accordance with EN12209:2003• 100,000 operations by electronic activation in accordance with EN12209:2003• 96 hour salt spray corrosion test at 100% humidity

High Security Slide Bar LockL8715/8717

The Kaye High Security Slide Bar Lock is a heavy duty, weather resistant lock fitted with a slide bar operation that automatically deadlocks on closure.

It was developed to external secure perimeter doors / gates at high security installations which need to restrict and control access. The Kaye Slide Bar Lock is fitted in a 6mm thick steel casing suitable for a variety of gate standards.

Subjected to an extensive test program, including 100,000 key and electronic operations, the lock is easily interfaced with existing access control systems for remote operation and includes a five-second automatic reset as standard.

Features:

• Slide for automatic ‘lock down’ on closure• Robust solid steel bar with padlock slot• Handle shears under undue force• Anti-drill cylinder profile options• ‘Lock down’ status signal• ‘Last person’ out alert• Local plug connection interface• Easy to install and maintain


High Security Slide Bar LockL8715/8717

Dimensions:

How to select the correct handing for your new KAYE Gate Lock:

120 MAX BOLT THROW BACK

376

89

458

378

9.5 MIN BOLT THROW BACK

430

100

145 145

6

117

605

L8717Inside

L8715Inside

OutsideHINGE ON THE LEFT

OutsideHINGE ON THE RIGHT


ASSA ABLOY Opening Solutions UK & Ireland High Security & Safety Group - Kaye Range Pepper RoadHunsletLeedsLS10 2PP

Tel: +44 (0)1902 [email protected]

assaabloyopeningsolutions.co.uk/hss

The ASSA ABLOY Group is the global leader in access solutions. Every day we help people feel safe, secure and experience a more open world.

Documents

High Security Locking Systems - ASSA ABLOY UK · High Security Locks for External Environments for perimeter security ... and maintains custodial locks, doors, fixtures, fittings