Hog Catalog Spring 13

Call 503-364-GHIA (4442) to order!

SUMMER 2013

i

Lens Section 1Taillite Lens:Left and Right Interchange. . . . . . . . . . . . 1

Taillite Lens Screws And Mounting Parts . . . 2Taillite Bulbholders . . . . . . . . . . . . . . . . . 2Parklite Lenses . . . . . . . . . . . . . . . . . . . . 3Parklite Bulbholders . . . . . . . . . . . . . . . . 4Parklite Screws/Mounting Parts . . . . . . . . . 4License Lite Lenses/Bulbholders/Screws . . . 4Reflectors . . . . . . . . . . . . . . . . . . . . . . . 5Misc. Lens Parts . . . . . . . . . . . . . . . . . . . 5Taillite Seals. . . . . . . . . . . . . . . . . . . . . . 6Parklite Seals . . . . . . . . . . . . . . . . . . . . . 6Misc. Lens Seals . . . . . . . . . . . . . . . . . . . 7

Windshield Section 8Windshield Seals . . . . . . . . . . . . . . . . . . 8Rear Window Seals: Coupe . . . . . . . . . . . . 9Front/Rear Window Trim/Molding . . . . . . . 9Glass: Windshield And Rear Window . . . . . . 9

Hood & Body Seal Section 10Front Hood Seals . . . . . . . . . . . . . . . . . .10

Exterior Body Parts Section 12Air Vent Grills & Screens . . . . . . . . . . . . . .12Body Emblems. . . . . . . . . . . . . . . . . . . .12Emblem Mounting Hardware . . . . . . . . . .13Exterior Molding Kits . . . . . . . . . . . . . . . .14Headlight Hardware . . . . . . . . . . . . . . . .15Front Hoods . . . . . . . . . . . . . . . . . . . . .17Rear Hoods . . . . . . . . . . . . . . . . . . . . . .18Rear Hood Lock . . . . . . . . . . . . . . . . . . .18License Lite Housing Edge Trim . . . . . . . . .19

Door Section 20Hinges . . . . . . . . . . . . . . . . . . . . . . . . .20Door Seals . . . . . . . . . . . . . . . . . . . . . .21Door Latch (Lock) & Door Opening Parts . . .21Outer Door Handle . . . . . . . . . . . . . . . . .24Striker Plates . . . . . . . . . . . . . . . . . . . . .25Window Slot Parts . . . . . . . . . . . . . . . . .26Outside Mirrors . . . . . . . . . . . . . . . . . . .27Door Glass . . . . . . . . . . . . . . . . . . . . . .28Window Regulator . . . . . . . . . . . . . . . . .28Coupe Window Seals . . . . . . . . . . . . . . . .29Window Trim . . . . . . . . . . . . . . . . . . . . .29Sill Plates . . . . . . . . . . . . . . . . . . . . . . .29

Quarter Window 30Quarter Window Seals . . . . . . . . . . . . . . .31Quarter Post Parts. . . . . . . . . . . . . . . . . .31Alum. / Quarter Window Seal Channel Parts .32Quarter Window Latch Parts . . . . . . . . . . .32

Convertible Parts 33Top Bows And Latching Parts . . . . . . . . . .33Top Frame Seals/Cables . . . . . . . . . . . . . .35Top Cables . . . . . . . . . . . . . . . . . . . . . .36Glass Rear Window Seal/Parts . . . . . . . . . .36Rear Seat Retaining Hardware (convertible only) . . . . . . . . . . . . . . . . . . . . . . . . . .37Metal Frame Parts/Bolts . . . . . . . . . . . . . .38Convertible Rear "Tub" Parts . . . . . . . . . . .39

Rockers 40Building A Ghia’s Rocker Structure . . . . . . .40

Front Nose 42Wheelhouse . . . . . . . . . . . . . . . . . . . . .42

Fenders 45Front Fenders . . . . . . . . . . . . . . . . . . . .45Coupe Rear Quarter Panel . . . . . . . . . . . .45Front Fender Rust Repair Panels/Parts . . . . .45Rear Quarter Panel . . . . . . . . . . . . . . . . .46Fuel Filler Flap . . . . . . . . . . . . . . . . . . . .48Engine Compartment Sheetmetal . . . . . . .49

Frame/Floor Pan Section 50Floor Pans . . . . . . . . . . . . . . . . . . . . . . .51

Bumpers 53Bumper Blades. . . . . . . . . . . . . . . . . . . .53Bumperettes . . . . . . . . . . . . . . . . . . . . .54Bumper Tubes . . . . . . . . . . . . . . . . . . . .55Bumper Arm . . . . . . . . . . . . . . . . . . . . .55Seals & Spacers . . . . . . . . . . . . . . . . . . .5656-71 Bumper Mounting Bolts. . . . . . . . . .5772-74 Bumper Mounting Bolts. . . . . . . . . .58License Plate Mounting Hardware . . . . . . .58

Electrical Section 59Wire Looms . . . . . . . . . . . . . . . . . . . . . .59Battery Cable / Ground Strap. . . . . . . . . . .60Bulbs / Bulb Kits . . . . . . . . . . . . . . . . . . .60Turn Signal Switch . . . . . . . . . . . . . . . . .61Combination T-Sig / Emer Flasher. . . . . . . .62Miscellaneous Relays. . . . . . . . . . . . . . . .62Fusebox And Parts . . . . . . . . . . . . . . . . .62Headlite Switch . . . . . . . . . . . . . . . . . . .63Emergency Blinker Lite Switch. . . . . . . . . .63Cigarette Lighter . . . . . . . . . . . . . . . . . .63Turn Signal Flasher Relay . . . . . . . . . . . . .64Tank Sending Units . . . . . . . . . . . . . . . . .65Ignition Switch: . . . . . . . . . . . . . . . . . . .65Electrical Stickers . . . . . . . . . . . . . . . . . .65Interior Lite Switch . . . . . . . . . . . . . . . . .66Interior Lite Lens . . . . . . . . . . . . . . . . . .66

Contents

ii House of Ghia Catalog

Miscellaneous Switches:. . . . . . . . . . . . . .66Wiper Parts 67

Wiper Blades . . . . . . . . . . . . . . . . . . . . .67Wiper Arms . . . . . . . . . . . . . . . . . . . . . .68Wiper Shaft Parts . . . . . . . . . . . . . . . . . .69Washer Spray Nozzle & Parts . . . . . . . . . . .70Wiper Motor . . . . . . . . . . . . . . . . . . . . .70

Dash Knobs & Instruments 71Dash Knobs. . . . . . . . . . . . . . . . . . . . . .71Speedometer Parts.. . . . . . . . . . . . . . . . .71Rebuilt Clocks . . . . . . . . . . . . . . . . . . . .72Fuel Guage . . . . . . . . . . . . . . . . . . . . . .72

Fuel System Parts 72Gas Tank Parts And Fittings . . . . . . . . . . . .72Air Cleaners And Parts . . . . . . . . . . . . . . .73

Interior Parts 74Interior Mirrors And Lenses . . . . . . . . . . . .74used Sun visors And Parts. . . . . . . . . . . . .75Horn Activating (Blowing) Parts . . . . . . . . .75Dash Pads. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

Glove Box & Parts . . . . . . . . . . . . . . . . . .77Coupe Roof And Headliner . . . . . . . . . . . .77Floor And Rear Seat Parts . . . . . . . . . . . . .78Seat Frame Parts. . . . . . . . . . . . . . . . . . .78

Engine Compartment Seals 79Ignition Wire Seals/Holders . . . . . . . . . . . .79Engine Sheetmetal Seals, Hoses, Etc . . . . . .79

Wheel Area 80Accessories 80Manuals, Books Literature 81TMI Products 82Glossary 94

Jim “The Ghia Guru” Patterson1941 - 2005

This Catalog is dedicated to the memory of Jim Patterson, the contents of which, was largely compiled by Jim himself.

1Lens Section

Join a Vintage Car Club! It can only add to the experience of owning a collectable car!

CUSTOMER INFO: No car manufacturer makes all items on cars they sell. Typically, 50%, or more, of assembly line parts are made by independent suppliers. VW is no exception. Dozens of outside firms, like Hella, Bosch, and SWF once made parts for Ghias. Often, they still do. Lenses, seals, switches, and a host of parts are still made by these Original Equipment Manufacturers (OEM). We are pleased to supply many OEM parts for your Ghia.

Lens SectionCUSTOMER INFO: 72-74 Taillite assemblies are also shared with 70-74 Type 311’s

56-57 Colored lens only No chrome ring (Bezel).All Red, NOS, USA Market, All Red, Fine repro, USA Market.All Red, used, USA MarketAmber/Red, NOS, Euro Market, Amber/Red, repro, Euro MarketAmber/Red, used, Euro Market

KA-945-227KQ-945-227KU-945-227KA-945-227AKQ-945-227AKU-945-227A

56-57 Chrome Ring or Bezel, NOS, Very HTFChrome Ring or Bezel, ReproChrome Ring or Bezel, used, HTF

KA-945-117KQ-945-117KU-945-117

58-59 T-lite, red. USA mrkt.One piece chrome and lens, NOS, HTF KA-945-227B58-59 T-lite, red. USA market.One piece, Gd. Repro. KQ-945-227B58-59 T-lite, red.USA market, One piece. Used. KU-945-227B58-59 T-lite,Amber, Euro market, NOS, HTF KA-945-227C58-59 T-lite, Amber, Euro Market, One Piece lens and chrome, Gd Repro KQ-945-227C58-59 T-lite, Amber, Euro market, Used, sometimes in stock KU-945-227C60-69 T-lite, red. USA market. OEM. Hella. Red T-signal segment. KA-945-227D60-69 T-lite, red. USA market. Quality, “Best Buy” Repro. KQ-945-227D60-69 T-lite, red. USA market. Used. KU-945-227D60-69 T-lite, amber/red. Euro. OEM. Hella. Amber T-signal segment. KA-945-227E60-69 T-lite, amber/red. Euro. Qual, “Best Buy” Repro. Ambr T-signal. KQ-945-227E60-69 T-lite, amber/red. Euro Market, used. KU-945-227E70-71 T-lite, red. USA market. OEM. Hella. Rare. KA-945-227J70-71 T-lite, red. USA market. Qual, “Best buy” repro. (B+ or A- lens.) KQ-945-227J70-71 T-lite, Red, USA Market, Used. KU-945-227J70-71 T-lite, amber/red. Euro. OEM. Hella. (Has white back up lens). KA-945-227H70-71 T-lite, amber/red. Euro. “Best Buy” repro. (B+ / A-) White back-up. KQ-945-227H70-71 T-lite, amber/red. Euro. Used. KU-945-227H72-74 T-lite, red. USA market. OEM Hella., HTF. YA-945-223R72-74 T-lite, red. USA market. Qual, “Best Buy” repro.. YQ-945-223R72-74 T-lite, red, USA market, Used YU-945-223R72-74 T-lite, amber/red. Euro. OEM Hella HTF. YA-945-223P72-74 T-lite, amber/red. Euro. White back-up. YQ-945-223P72-74 T-lite,Amber, Euro Market, Used, HTF YU-945-223P

TAiLLiTE LEnS:Left and Right Interchange.

TypicalTaillite lens

One Piece

9 inch

onepiece58-59

60-69 70-71 72-74

twopiece56-57

Two Piece

10 inch

13 inch

2 House of Ghia Catalog

COME VISIT! We enjoy company!.

TAiLLiTE LEnS SCREwS AnD MoUnTing PARTS56-59 Screw, lens chrome ring to b-holder. OE shape, threads.

Stainless Pair. Need 2 per lens. SoP-04-12SB Zinc Pair, Need 2 per lens. SoP-04-12ZE

60-69* Screw, T-lite lens. Stainless. Need 2 per lens. Pair. SPP-04-20SB70-74* Screw, T-lite lens. Long upper screw. One per lens. . SPP-04-72CB70-74* Screw, T-lite lens. Short lower screw. One per lens. . SPP-04-20SB72-74* Screw, B-holder to tip of fender brace. Need two per b-hlder. Pair. TPP-55-19ZB56-71* Wing nut Brass. Holds T-lite bulbholder to body. Pair. nwX-06-00BB60-69 Brace/Bracket, Repro KQ-945-295A60-69 Brace/bracket Tack welded to inside of fender opening. USED. KU-945-295A70-71 Brace/bracket Tack welded to inside of fender opening. NOS KA-945-296B

Ghia Tip: Wire ends cruddy? Connections corroded? A brass bristled toothbrush and lots of ‘elbow grease’ will clean off corrosion, restoring electrical flow. Bright lights again!

TAiLLiTE BULBHoLDERS 56-57 B-holder USED. Scarce. Uses 2 double ended bulbs. KU-945-17558-59 B-holder Uses two 'flash-bulb' style bulbs.

NOS Original b-holder. HTF. KA-945-175AUSED b-holder KU-945-175A

60 B-holder Bared wire/set screw connectors. Uses 3 bulbs.NOS Original b-holder., limited supply. KA-945-175BUSED b-holder U-paint reflector. KU-945-175BRecoated b-holder KR-945-175B

61-66 B-holder USED. Plastic board / twin post style. Works 60-69. KU-945-175ERecoated b-holder KR-945-175E

67-68 B-holder USED. Nylon block / brass tabs style. Works 60-69. KU-945-175HRecoated b-holder KR-945-175H

69 B-holder USED. Has separate ground wire tab. Works 60-69.NOS Original b-holder, limited supply. KA-945-175JUSED Good chrome. KU-945-175JRecoated b-holder KR-945-175J

70-71 B-holder Chrome edge is visible to outside. Uses 3 bulbs NOS Original b-holder. USA market. Limited Supply. KA-945-231AUSED Good chrome. USA market. Paint reflector. KU-945-231A

72 B-holder Chrome edge is museum authentic for 72. Works 73-74.NOS Original b-holder. Limited supply. YA-945-231MUSED Good chrome. YU-945-231M

73-74 B-holder Painted silver edge is museum for 73-74. Works 72.NOS Original b-holder. Limited supply. YA-945-231nUSED Painted edge may need touch-up. YU-945-231n

Typicaltaillite

bulbholder

Cross section of60-69 taillite as

electricity touchesbase of the bulbs

60 onlyset screw/

barred wire

61-662 posts supportbakelite board

67-69Nylon blocksurroundscopper tab

56-57 58-59

Wing-nut

60 70-71 72-74

Typicalof

60-69Bracket

T-lite opening

70-71 Brace/bracket Tack welded to inside of fender opening. USED. KU-945-296B* New Hella lenses come with new screws.

3Lens Section

Definition: For clarity, H of G calls the front turn signal…parklite lens . (So there is no confusion with the rear turn signal…taillite lens.)56-57* Parklite lens Screws thru SIDE of lens. Screws not included.

Clear, Plastic, OEM, sometimes in stockAmber, Plastic, OEM, sometimes in stockClear, Plastic, Superb repro. Hella markings, but not hella Amber, Plastic, Repro, Good, not superb repro. No name on face. Clear, Plastic, Used, HTF in good conditionAmber, Plastic, Used, HTF in good condition

UA-953-161BA-953-161UQ-953-161BQ-953-161UU-953-161BU-953-161

58-64 5# Parklite lens Held in place by a chrome ring. L or R.Clear Glass, NOS, Hella, HTFAmber Plastic. NOS. Hella. HTF.Clear Good Repro, Hella markings, but not HellaAmber Good Repro, Hella markings, but not HellaClear Plastic. Repro. No name. Amber Plastic. Repro. No name. Clear, used, OG GlassAmber, used, OG Plastic

KA-953-161AKA-953-161B KQ-953-161AKQ-953-161BKE-953-161AKE-953-161BKU-953-161AKU-953-161B

64 5-69 Parklite lens Fluting refers to light deflection grooves.Amber All Euro/USAthru 67 True Hella. Straight fluting.Amber Euro market. Repro. Straight fluting.Amber, Euro Market, used, Straight FlutingClear, Euro, OEM, HellaClear Euro. P-lite lens. Not USA. Gives unique look.

YA-953-161 YQ-953-161 YU-953-161

YA-953-161AYQ-953-161A

68-69 Amber Used, USA market. Diagonal fluting. YU-953-161DTechnically, Diagonal fluted lens were only used on 68-69 USA market Ghias.

70-74 Parklite lens Hella. Amber. Euro. Less side fluting than USA lens. LH Euro OE. limited supply, RH Euro OE. limited supply,.

KA-953-161E KA-953-162E

70-74 Parklite lens USA . Heavy fluting on side, as correct. LH USA market OEM, Hella, HTF RH USA market OEM, Hella, HTF LH USA market Decent repro. C+ / B-. RH USA market Decent repro. C+ / B-. LH USA market Used, Hella RH USA market Used, Hella

KA-953-161CKA-953-162CKD-953-161C KD-953-162CKU-953-161CKU-953-162C

56-57 58-64.564.5-69 (Euro)64.5-67 (USA) 68-69 (USA)

70-74Euro lens USA lens

to chassis *2-103-015

to chassis #5-853-201

Straight Fluting Diagonal Fluting Can see bulb though side bulb not visible though sideto chassis #5-853-202 - #149 -1200-000

Warning: Life was once simple. Earlier ONLY an original lens, (made by Hella) existed for Ghias. Now, besides the “True-Hella” lens, 3 unique repros from 3 different molds are marketed as 60-69 lenses. At least one repro “borrows” the Hella logo.Ordering a lens from a catalog that lists only one lens? Gottcha! Which of the 4 lenses will they send?Worse, if you pay “big bucks”, assuming it is for an OEM lens, is that what you get?

PARKLiTE LEnSES


PARKLiTE BULBHoLDERS56-58 5 Decorative chrome cover, parklite sleeve for p-lite b-holder.

Deco Chrome Cover, New, HTFDeco Chrome Cover, Used

KA-953-163KU-953-163

56-58 5 Bulbholder Bolts to fender bracket.Bulbholder, 1 contact repro Bulb holder, 1 contact, usedBulb holder, 2 contact, USA, ReproBulb holder, 2 contact, USA, used

UQ-953-051UU-953-051UQ-953-052UU-953-052

58-64 5 Bulb holder, New Repro, very nice!Bulb holder USED original, HTF in good conditionBulbholder Contacts, repro, each

KQ-953-053BKU-953-053B

KQ-953-049 58-64 5 Lens mounting ring Chrome. USED. Like child’s bracelet. KU-953-163A64 5-69 Bulb holder, NOS,HTF, inquire

Bulb holder, used, 64.5-68Bulb holder, used, 69 (has ground tab)Bulb holder, used, 64.5-69 (single contact)

KA-953-053FKU-953-053F KU-953-053g KU-953-053S

70-74 B-holder Rubber bulbholder seal torn? Water/mud can cause corrosion. Bulb connections are not replaceable. Bulbholder becomes junk!

LH Used, Could require work on wires, painting. RH Used Could require work on wires, painting.LH repro, chromed plasticRH repro, chromed plastic

KU-953-051g KU-953-052gKQ-953-051gKQ-953-052g

PARKLiTE SCREwS/MoUnTing PARTS58-64 5 Special screw Holds chrome ring to p-lite. Stainless.

Thru Chassis # 5-853-201 SoP-03-16SB64 5-69 Screw Works well. Looks great. Is 2 mm longer than OEM. Pair. SPP-03-16SB

70-74 Screw Looks original. Stainless steel. Pair. SPP-04-20SB58 5-74 Stud * Dual threads. W/nuts. Stainless/brass. Holds p-lite b-holder to

fender. 2 per b-holder. Also fits lic. lite housing to rear lid. SKH-05-25SB

56-58.5 58.5-64.5 64.5-69 70-74

to chassis 2 103 015 fron chassis 2 103 016 to 5-853-201 from chassis 5 853 202 to

Cover

bulbholder Chrome ring

Heavy,cast

chrome

Licenselite

housing

LiCEnSE LiTE LEnSES/BULBHoLDERS/SCREwS56-58 5 Lens, license lite. Flat. Very rare. Inquire

Lens, License lite, Flat, UsedLens, License lite, Flat, Repro, No markings

KA-943-121KU-943-121KQ-943-121

58 5-74 Lens*, license lite. White. Cupped, fit bottom of housing. Lens. New. Hella, with screws. each.

Lens Repro. each. Lens USED. Without/screws. Each.

KA-943-121AKQ-943-121AKU-943-121A

58 5-74 Screw, License lite lenses. SoP-04-12SB*Cupped lens from Chassis #1-676-789

5Lens Section

House of Ghia accepts: Visa, Mastercard, Discover, and American Express.

REFLECToRSNot lighted.These carry no bulb.

68-69

70-71

The cursed flawed

bolt

Chrome base

Sidereflector

Rear facing reflector

Vital Information Reflectors are found on the flank of all 68-69 and 70-71 USA market Ghias. New, original reflectors, of either type, are virtually extinct. Used pieces are expensive or not available. BEFORE painting! Have on hand all needed reflector parts. OR, eliminate unit and fill in holes.

Have you spotted the fatal design flaw in 70-71 reflectors? Sure! The mounting bolt for the entire unit is embedded in the plastic of the rear facing reflector. If the mild steel embedded bolt is rusty or corroded, trying to remove the nut will break either the plastic or the bolt. In either case, you’ll have no way to reinstall the reflector.

68-69 Reflector Circular with slanting base. NOS, Hard to find, but we do get them from time to time.Used, usually the chrome is faded on these

KA-945-557 KU-945-557

68-69 Screw Circular reflector. Pair. TFP-48-22ZB70-71 Chrome base USED.

Left hand reflector base Right hand reflector base

KU-945-109KU-945-110

70-71 Reflector Side facing piece only. Rectangular w/curved end. Fits left or right.

ReproUsed

KQ-945-133 KU-945-133

70-71 Reflector Rear facing. Rectangluar, with bolt. Fits left or right.ReproUsed very hard to find with stud intact

KQ-945-131KU-945-131

70-71 Screw Chrome base to fender. Stainless, with nuts. SoP-05-20SB

MiSC. LEnS PARTSBack-up lite, lenses, Euro Headlite clips, etc.

67-69 Back-up lite unit Bumper blade mounted. USED. Housing and lens. BU-941-07267-69 Back-up lite lens USED, Rectangular. Glass, as is authentic. BU-941-37167-69 Back-up lite lens Repro. rectangular. Plastic. BE-941-37167-69 Special nut Converts Bug back-up lite to KG bumper mounted unit.

Allows use of correct wires and thread boot. BU-941-54556-66 Back-up light switch For 58-66 need this special back-up lite

switch uses your speedo . Inquire on availability BU-941-521BEuro Headlite glass lens retaining springs Only EUROPEAN

MODELS with separate glass lens. Looks like a straightened paper clip.,pack of 6 KA-941-125

Ego Marks: Since the invention of hand-held body grinders, every "would be" bodyman who ever lived, thought that he and he alone, could scalp paint without scarring in-place chrome and mold-ings. All tried. None could! Result? Used chrome pieces on a Ghia almost always exhibit these Ego Marks … sanding and grinder scratches on even the best piece of chrome. So, on many used chrome items, it is often not a question of IF they have Ego Marks; but a question of how much scratching can be endured. Condition of the chrome often dramatically changes the value of a used part. Don't expect perfection. Be willing to accept tiny defects for a substantial price break.


.

TAiLLiTE SEALS56-57

(not available)58-59 60-69 70-71 72-74

Typical taillite seals

taillite to body seal

Lens to Bulbholder face seal

56-57 Seal Flat, cookie-cutter type KE-945-17758-59 Seal Taillite to body. Designed for one piece lenses. 56-57 fits okay,

but not quite right.NOS, HTF, but sometimes availableRepro, PairUsed Original, sometimes these are in good condition

KA-945-177AKQ-945-177AKU-945-177A

60-69 Seal Taillite to body. Good repro. Pair. KQ-945-177B70-71 Seal Taillite to body. Fine repro. Pair. KQ-945-177C72-74 Seal Taillite to body. Good Repro, Pair YQ 945-19170-74 Seal Lens to B-hldr face.”Rope” seal. Seals edge of lens as it touches

b-holder. H of G. YQ-945-23570-74 Cap Back of taillite bulbholder. Vital for corrosion prevention.

Top cap, at top/bottom of b-hldr. One wire connection. USED.Center cap, at center of b-hldr. Two wire connection. USED.

YU-945-281AYU-945-283A

ghiaTip: 56-68. T-lites and parklites dull? Flicker? Mounting bolts/nuts as they pass thru body or mounting braces, are the ONLY ground. Newly repainted? Metal rusty? No wonder ground is poor. Use wire brush to clean brace, or fender, under light unit nuts/studs. This can improve electrical flow. NWX-06-00BB on page 2 offers excellent electrical conductivity.

Taillite bulbholder cap

PARKLiTE SEALSChrome bulbholder to body seal.

55-58 5 Seal Park-lite to body. Fits edge of deco cover. KQ-953-16558-64 5 Seal Park-lite to body. H of G KQ-953-165A64 5-69 Seal Park-lite to body. KQ-953-165B

70-74 Seal Complex p-lite. Surrounds bulbholder. Only 1/4 in. of sealshows, but untorn seal a must. Avoids costly corrosion of parts.L-hand p-lite seal Hella, sometimes available.R-hand p-lite seal Hella, sometimes available.L-hand p-lite seal Repro. R-hand p-lite seal Repro.

KA-953-165CKA-953-166CKQ-953-165CKQ-953-166C

70-74 Knobby tube for parklite wires NewUsed

KQ-953-167KU-953-167

58-64 5 Seal Lens edge to bulbholder Repro. H of G. KQ-953-15358-64 5 Seal Chrome ring to lens, Small. Slender. Repro. KQ-953-15164 5-69 Seal Lens edge to bulbholder. Keeps water out. sold as a pair H of G . YQ-953-151

Three examples of parklite seals

56-57To chassis #2-103-014

58-64.5From chassis #2-103-014 thru 5-853-201

64.5-69

70-74Knobby Tube

7Lens Section

Ghia Tip from JP: Look closely at a license lite housing … the pod. Housings are cast metal on all but the earliest Ghias. Somehow, the castings end up concave. No problem, until a restorer installs the flat bottomed lenses. Then, even with the seal correctly installed, there is a disturbing gap. Everyone wants to draw up the lens by tightening the mounting screws, "Just one more turn." Crack! The mounting tabs on the lens break. SOLUTION: Use a very fine bead of silicone rubber seal-ant on the seal face contacting the metal housing. When tightening screws, silicone glue acts as a gasket, giving a gapless seal.

MiSC. LEnS SEALSlite, reflector, headlite, etc.

58 5-74 License lite lens seal Keeps bulb parts water & corrosion free.Seal Lic. lite. Fine repro. H of G.Seal Lic. lite. Ok repro, nothing special.

KQ-953-131KD-953-131

68-69 Reflector seal Round. Rear flank. Quality repro. H of G. KQ-945-55970-71 Reflector seal Rectangular-wrap around reflector.

Left hand, Rectangular reflector seals Qual reproRight hand, Rectangular reflector seals Qual reproLeft hand, used original in good shape.Right hand, used original, in good shape.

KQ-945-139KQ-945-140KU-945-139KU-945-140

67-69 Back-up lite boot Fits special nut, Water proofs wire ends. Covers threads/wires below bumper mounted back-up. H of G. BQ-941-539

Important Ghia Tip from JP: After accidents, few body shops take time to correctly rebuild headlite bucket tip. At fender end there must be a lip or channel about 1/4 inch wide, which circles the head-lite opening. The channel looks like a simple, low buck, garage bracket used to hold garden hose. What! It is not there? From the seal's point of view, there is nothing but a flat sided "cliff" (cunningly crafted of Bondo) for the seal to attach itself? Well, how in the____ is the seal going to fit? I estimate at least one headlite tip channel, or lip, is damaged on 80% of all Ghias. Lack of lip is a quick test: Is your Ghia a virgin in the Fender Bender Derby held on public streets? Does your eye tell you this lip is part of the fender tip? T'aint so! The headlite bucket carries the lip. For a good fitting seal and chrome ring, you may need to replace the headlite bucket. Fortunately, replacement is a cheap, easy task, IF done at the correct time… before painting.

Reflector seals

All Seal, headlite chrome ring (door) to fender seal. Sponge. CAUTION: Must have undamaged “lip” on your h-lite bucket tip for any hdlite ring seal to fit with grace/dignity. (See above tip!)

German OE Seal mold/cast, 1-piece each KA-941-191Quality repro h-lite seal Mold/cast in 1 piece (As OE.) Easy installation. Seal naturally makes a circle. H of G. eachRepro, extruded, glued

KQ-941-191KD-941-191

Customer Note: Choices! Choices! Ghia buffs have never had so many important choices on parts. Use common sense! Think quality! Don't be guilty of penny-wise/dollar-foolish logic. Where's the savings if a few pennies cheaper seal only lasts half as long? Or takes twice as long to install? Or screams"I'm ugly! I don't belong here!" Today's brick hard seal is tomor-row's cracked rubber. Buy parts to out survive you. You are not going thru the pain of a major restoration so your Ghia will end up a junkyard yard queen.

to fender

seal To lip or shelf

headlite ring

cross-section ofheadlite seal

GoodExtruded

glued seam

BestMolded

one piece

Back-up wire boot


windshield SectionSee convertible section for 69 5-74 convertible rear window seal and glass

The term ‘Cal-look’ means California look. Cal-look seals are plain black seals WITHOUT a way to install the original, ‘chrome’ trim in the center of the seal.

Diagrams are for training purposes. They do not represent a true picture of an X-section

A = Cross-section of a "Cal-look" windshield seal without provision for a "chrome" trim in the face of the seal. B = Cross-section of a 56-66.5 OEM windshield seal and "chrome" trim. Shows how molding is attached to seal. C = Cross-section of 66.5-74 original windshield seal and "chrome" " trim (actually aluminum). Shows how molding is attached to seal.

Cross-sectionof various

windshield seals

"Cal look" Trim

Ghia TipInstalling glass/trim`/seal in opening?

1st: Put seal on glass

2nd: Put trim on seal

3rd: Install in opening.

Ghia TipGot an early Ghia-56-66? No new chrome trim is available. Still want trim? Find used trim. ORSwitch to 67-74 ghia windshield, trim, and seal. Inquire for specifics.

Era correct early seal and late aluminum trim will not work together.

winDSHiELD SEALSALL Cal-look front seals Plain black seal. No groove for trim. Quality Cal

front. Fine seal, A Best Buy. This seal is the most forgiving seal. Use on any combination of car/glass. KQ-845-125

56-66 5 Original style w-shield seal German Repro, for “C-shaped” trim,pre-molded corners (blocked, Excellent.)Fine repro Uses true chrome, “C”-shaped” trim. Not premolded

KQ-845-121AKD-845-121A

66 5-74 Original style w-shield seal German Repro, for “T-shaped” trim, premolded corners, Blocked), Excellent.Decent Repro, for “T-shaped” trim. Not premolded

KQ-845-121CKD-845-119

Imagine this 'straw' represents a complex, trim groove 'gash' in the center of a seal. The straight straw represents the rubber as it is first extruded. Bend the straw so it will go around a corner, like the four cor-ners of the windshield. Yep! The straw/trim groove collapses. That's why original Karmann seals used an extra, expensive, blocking or shoulder-ing process. So does our quality German seal. Seals with pre-formed corners fit correctly!

Cross-section of late windshield seal66.5-74

Seal groove captures trim Trim T-shaped

9Windshield Section

REAR winDow SEALS: CoUPEAll cpe Cal-look rear seals Plain black seal. No groove for trim.

Quality Cal rear Fine seal. A Best Buy. This seal is the most for-giving seal. Use on any combination of car / glass. KQ-845-525

56-66 5 Original style rear seals Use with trim. “C” shaped trim. (See “A” below) (See front seal description )German Repro, premolded corners (blocked), ExcellentFine repro not premolded

KQ-845-521AKD-845-521A

66 5-74 Original style rear seal German Repro, for “T-shaped” trim Premolded corners (blocked) ExcellentFine Repro, for “T-shaped” trim, not premolded (blocked)

KQ-845-521C

KD-845-521C

FRonT/REAR winDow TRiM/MoLDingThe “chrome” in the rubber seal

56-66 5 True chrome, hard metal, “C”-shaped trim. A above. Windshield trim, True chrome. USED. 2 piece.Rear window trim, True chrome. USED. 2 piece.

KU-85C-30KKU-85C-35K

66 5-74 Anodized aluminum, soft “T”-shaped trim. B above. Windshield trim, Anodized alum. New. OE. 2 pc. Rear window trim, Anodized alum. New. OE. 2 pc.

KA-85A-30KKA-85A-35K

66 5-74 Windshield trim, Alum. USED. Good/not perfect. 88%+Rear window trim, Alum. USED. Good/not perfect. 88%+

KU-85A-30KKU-85A-35K

56-66 566 5-74

Junction cover, covers joint, or gap, where 2 halves of trim join.True chrome style junction cover USED. EachAnodized alum style junction cover USED. Each.

KU-85C-309KU-85A-309

NOTE: Any used anodized aluminum trim will have faced 20 plus years of road debri. The resulting dull finish cannot be inexpensively fixed. However, our used trim will look just like other used trim. Work soft aluminum into shape with thumb pressure.

Cross-Section of Windshield OpeningShowing X section of glass, seal, trim and windshield frameA Shows 56-66.5 (early) C-shaped trim.B Shows 66.5-74 (late) T-shaped trim.Arrows point to top of glass.Yep! There is nothing wrong with your eyesight!The EARLY glass is taller, by 1/4”!

metal windshield frame

seal

glass

gLASS: winDSHiELD AnD REAR winDow56-66 5 ‘Tall’ glass 17 1/4” ,New. Repro. Most often time its fully tinted Supply is

hit and miss. KQ-845-101A66 5-74 ‘Short’ glass 17”,New. Repro.

Clear windshield Short glass. New. Repro. Tinted windshield Short glass. New. Repro.

KQ-845-101CKQ-845-102

56-74 Rear Glass, only available usedWithout DefrostWith Defrost

KU-845-501KU-845-501D

Coupe rear window glass is common. Every coupe that ever lived, has surrendered it's glass rear window. What is uncom-mon is a working defroster rear window. Don't expect to find a used rear window without numerous "broken wires". Restor-ing heating wires, so they LOOK authentic, is tedious, time consuming, and often futile.

Late aluminum trim. "T" shaped in cross section.


Over 500,000 Ford Mustangs were sold in model year 1965. It took nearly 20 years for 400,000 Karmann Ghias to be sold.

FRonT HooD SEALSAll Front hood seal

German, Cast sponge. Superb, not always availableQuality Repro, Extruded, fits channel tight, HoG ReproEcono Repro, make do seal.

KA-823-705AKQ-823-705AKE-823-705A

Hood & Body Seal SectionHow to find a good fitting front hood seal

Step 1. Suppose a latched lid’s bottom is the arrow. Wow! Seal “B” is pre-crushed. The lowered lid, or hood, won’t even contact the seal. Seal “A” nicely contacts bot-tom of decending lid and ‘flares-out’, giving maximum contact.

Step 2. Suppose line below the seal cross sections is the bottom width of hood seal channel. What’s this? Seal B couldn’t fill channel, no matter how hard you tried!

Step 3. Look for quality sponge. Generally, given the same flexibility of sponge, the larger the trapped “air bubbles”, the shorter seals life span. Smooth, thick, outer skin? A long-lasting seal!

Front hood seals are only one of many Ghia parts where YOU must make choices!Cross-section of hood seals

56-67 Button style hood stop Not adjustable. Pair. KQ-823-49968-74 Adjustable hood stop Screws in place. Adjusts hood height.

Quality repro hood stop Precision cast. RQ-823-49960-74 Air vent grill seals

Quality Repro, H of G , pair.Decent repro, pair

KQ-853-657KD-853-657

All Drain tube Drains water from front hood channel.Quality repro Pair. H of G.Decent Repro, pair

KQ-823-715KD-823-715

All Nose emblem seal Circular, thin seal under emblem on hood.Quality repro H of G.Decent Repro

KQ-853-609KD-853-609

All Dual horn boot Vital. Keeps air from blowing thru instruments. Looks just like a baby’s small rubber diaper. Fits only true Ghia horns.OEM, sometimes availableQuality Repro, good repro of the orginal boot

KA-951-231KQ-951-231

Hood stop

‘J’ shaped drain tube

Nose emblem seal

Horn boot

Air vent seal

Ghia Tip: To install air vent grille seals, test the length on the grille and trim/stretch if needed. (Yes, you should gently pull on the seal to 'set the rubber'. It is only from that point on that the seal will return to its original length.) Using an ordinary stapler, staple the ends of the seal together in the groove. (Yes, that's the high-tech method that Karmann used on the assembly-line. They don't call a Ghia a hand built car for nothing!) You may need a tad of glue to control the seal in the corners.

11Hood & Body Seal Section

Customer Info: Common sense, or a feeling of proportion, suggest rear deck lid seal goes all around engine compartment in the trough or channel. Not so! Intended for lower half of trough only. The most frequently asked question at House of Ghia is, "Where is the other half of my rear deck lid seal?" It doesn't exist. Never did.

All Rear deck lid seal (Also called engine compartment lid or rear hood)Quality repro rear lid seal Near OEM. Econo rear lid seal Brasil,same cross-section as front hood seal

KQ-827-705KE-827-705

Ghia Tip: Karmann used many ways to mount deck lid seals All were attempts to bend seal around sharp curves. Glue was a common but ineffective technique. All still use glue, but also use push nuts on the 4 posts found in the trough. . If all else fails, drill a small hole thru the lower flap of the seal and into the metal channel. Use a self-tapping screw with a large washer. Put your holes in the end and in the 'curve' of the channel.

Seal Clips Channel has 4 small diameter studs in center. Stud pokes thru lower flap of seal. Clip grasps stud, thus holding seal in place. Studs are found in the channel at the ‘ends’ of seal, and in the corners. 5 pack. Need 4. (note, clips could be metal push nuts depending on availability) Pon-15-00PESeal Clips Channel has 4 pencil-sized holes. Clip goes thru hole poked in seal’s lower flap, & thru metal hole. Clip has prongs that ex-pand after squeezing thru hole, thus holding seal in place. 4 pack. AV-32-05nD

Clips for 4 studs:

Clips for 4 holes:

All License lite housing to rear deck lid seal Quality repro lic lite seal Decent repro lic lite seal Econo repro lic lite seal

KQ-943-191 KD-943-191 KE-943-191

(Look for license lite lens seals in lens seal section)

Customer Info: Do you shop by price alone? Price and quality are often related. Low price, low quality. There are exceptions! But, in a competitive market, it is madness to assume quality accompanies an unbelievably low price. Take the above seals. You wouldn't want lower quality econo repros. Yet, some would gladly sell them to you. Common sense, and a quest for affordable quality, are a person's best protection against being ripped off.


Exterior Body Parts Section

AiR VEnT gRiLLS & SCREEnSAlso called fresh air or nose moldings, trim or grilles. For fresh air vent openings.

56-59 Fresh Air Vent Grill, Decent Repro, LHDecent Repro, RH Used, LH, HTF in good conditionUsed, RH, HTF in good condition

KQ-853-651KQ-853-652KU-853-651KU-853-652

61-74 Fresh Air Vent Grill NOS HTF. InquireLeftRight

KA-853-651BKA-853-652B

Repro Near OEM quality. Based on price, a Best Buy. Far brighter than debris blasted, 30 yr. old grilles. NLALeft, NLARight, Limited Supply

KQ-853-651BKQ-853-652B

Used, Left handUsed, Right hand

KU-853-651BKU-853-652B

NOTE: 1960 grills are unique in that they had three mounting tabs instead of 1 for 61-74 grills. Call or email for pricing and availability on these HTF grills.

60-74

56-59

56-59 Debris screen Flat. Behind grilles. Large mesh. Each.USED Debris screen. Metal mesh, L/R. KU-85M-653

60-74 Debris screen Flat. Behind grilles. Large mesh. Each.USED Debris screen. Metal mesh.USED Debris screen.Long- lasting. Never rust plastic.

KU-85M-653AKU-85P-653A

56-59 Fly-screen Cupped. Fit in air channel itself. Fine mesh.Used LH, Metal Mesh, HTF in good conditionUsed RH, Metal Mesh, HTF in good condition

KU-25M-971LKU-25M-971R

60-74 Fly-screen Cupped. Fit in air channel itself. Fine mesh.Used LH, Metal Mesh, HTF in good conditionUsed RH, Metal Mesh, HTF in good conditionUsed, Left or Right hand, Plastic, Good condition

KU-25M-972LKU-25M-972R

KU-25P-971NOTE: Sometime in the late ‘60s plastic replaced metal screens

Debris screen goes immediately

behind grill

Fly-screen fits in air channel

Seal (page 10)

BoDY EMBLEMS

Customer Info: Front nose (prow) emblems were of three styles. Ghias thru 57 or so used blue, porcelain or cloisonne badge. Ghias 58 or so thru 62 used 1 piece, cast, heavy, chromed badge. All Ghias from 63 thru 74 used a two piece aluminum emblem.

One piece cast metal

Two piece aluminum or, on early Ghias, chrome with porcelain center

Regardless of looks, all Ghia nose emblems physically interchange

13Exterior Body Parts Section

Nose emblem See above for discussion of types of emblems.56-58 Quality Repro, 2-piece, Blue Ceramic

Used, very HTFKQ-853-601KU-853-601

58-62 Used, One piece. Check on availability. No repro available. KU-853-601A63-74 Nose Emblem

German, OEM. 2 piece. Anodized aluminum. Bright, shiny center (not muted). KA-853-60KQuality repro 2 piece. Nicely done.Used, 2-piece

KQ-853-60KKU-853-60K

At shows, trailer ‘Queens’ are nice. But, to my mind, street, daily driver type cars are ‘Kings’. Street is neat!

56-60 Fender or ‘flank’ badge, with ‘ears,’ RH fender only..Repro,, fender badge. Fits all.Used, very HTF

KQ-853-900KU-853-900

61-74 Fender or ‘flank’ badge, flat top, RH fender onlyOEM German, more stout than originally made, excellent.Quality repro, A Best Buy.Used, badges in decent condition are HTF

KA-853-901KQ-853-901KU-853-901

61-74 badge'flat topped'

Bug convertible badge,does not belong on a Ghia

56-60 badgewith ‘ears’ at top

56-62 Karmann Ghia Script, Rear deck lid. See mounting kits, below. 12 inches long, scarce, inquire.

Repro, KG script, very good repro!.Used, HTF in good condition, inquire

KQ-853-905KU-853-905

63-74 Karmann Ghia Script, Rear deck lid. See mounting kits below. 9 inch.OEMFine reproUsed, Decent condition when in stock

gA-853-905gQ-853-905gU-853-905

63-66Volkswagen Script, on rear decklid (see emblem mount kits);

VW-Script, Underlined, Used. Virtually every year during this era VW used a different sized, shaped, studded script. KU-853-687

67-74 OEM, VW script. Current VW replacement part. Only difference from assembly line? Brushed aluminum face, rather than polished.Used, usually can find these in decent condition

BA-853-687KBU-853-687K

EMBLEM MoUnTing HARDwAREsold separately

58-74 Fender badge, barrel nuts. Need 2. 3 pak BA-853-61563-66 VW deck script, push-on nuts.Need 4. 5 pak Pon-15-00PE67-74 VW deck script, push-on nuts.Need 3. 4 pak Pon-30-00PD67-74 KG deck script, push-on nuts. Need 4. 4 pak Pon-25-00Pg73-74 Nose emblem, push-on nuts. Need 2. 4 pak Pon-25-00Pg

Typical barrel

nut

Typical push-on nut


EXTERioR MoLDing KiTSWe strongly urge using new clips with new moldings.

Why the concern? There are several molding kits on the market. Quality ranges from superb to not-so-superb.

Used trim is hard to find for many reasons:1) Each piece on a side is of a different length.2) Each molding uses a different angle or bevel at the door opening. (Only front of door trim swap side for side)3) Two non-interchangeable molding clip slots exist. Wide slot used plastic clips. Narrow slot used metal.4) Two distinctly different cross-sections of trim exist. (i.e. arrow-head/hatchet-shaped, or softly rounded)5) Each of several suppliers, over the years, made subtle changes in the trim’s profile. (Often to make it more generic.)6) Each trim ‘lost’, or wore away, its bright, metal, anodized finish at a different rate. Even one side of the samepiece of trim can

Want Ghia Side MoldinG?BE CAREFUL!

ConSUMER DAngER ZonE AHEAD!

Molding angles at door opening Molding in cross section

Angled & beveled

Beveled

Angled

Early trim style: 56-64Assembly-line only

Exact Repro not available

Late trim styleCurrent OEM

Fits 60-74

Early style reproUses plastic clips

Some version fits all

Hatchet Rounded Hatchet

Narrowslot

Wide slot plastic clip

Wide plastic

Side of body molding (trim), 12 piece:. Uses plastic clips (not included).

56-5960-67

HATCHET EDGED fine repro Long front of door trim.HATCHET EDGED fine repro,will fit 68 fits thru ‘74 as well, uses plastic clips

KQ-853-50KKQ-853-51K

68-7468-74

SOFTLY ROUNDED German OEMSOFTLY ROUNDED quality repro stainless

KA-853-52KKQ-853-52K

AllMolding Clips, black plastic with drive-in center plug. Fits all Ghia trim. Need 52 for 12 moldings.

54 clip unit pak, (2 spares)Individual clips

KQ-853-54PKQ-853-54E

56-64 Steel clips USED only. Need 52. Expensive and HTF. Use only with your early, original trim

KU-853-547

Everyone calls trim chrome; actually it is anodized aluminum. All trim comes with correct angles and bevels.

Main clipbody withsegmentsthat flare

Center Pin

Three views of clip


55-64 5 Headlight ring, Quality Repro, sealed beam, to chassis 5-930-430

Used, HTF in good condition, original with Hella markingsKQ-941-175KU-941-175

64 5-74 Headlite Ring, Chrome, from Chassis #5-930-431Quality Repro OEM Style You can barely tell these from an OE part (which is NLA). No name stamped on face of ring!

KQ-941-175A

Brazillian Repro, use in pairs, sold eachUsed, some with Hella logo (64-68?) some without (69-74?)

KE-941-175AKU-941-175A

64 5-74 Screw, headlite ring to bucket. Use only with original style head-lite rings. Stainless steel. Pair.

SoP-04-20SB

Screw Brazilian repro h-lite to bucket. Use only with Brazilian repro rings.

SoP-04-20ZB

56-64 5 Headlite adjusting assembly Used, Seal beam only. Painted ring with 3 flush mounted adjusting screws. Spoons’ against unit’s face. To Chassis #5-630-430. None are ready to use, all will need refurbishingHeadlight Retaining Clip

Repro, good, sold each Used, sometimes available, sold each

KU-941-037

KQ-941-171KU-941-171

64 5-74 Headlite adjusting assembly Seal beam only. ‘Guts’ of headlite. Many parts, that, when all assembled, grasp/adjust seal beam. from Chassis #5-930-431

OEM Brasil Fits all tabs in Ghia h-lite bucket, Excellent.Repro assembly Decent, Lite weight.Used assembly

KA-941-041KQ-941-041 KU-941-041

OEM ringrolled on

back edge

Brazilianring, rolled

on inner(bulb) edge

Chrome outer ring

Adjusting assembly

Chrome retaining ringtight fit on bulb Seal beam bulb

Drain tube

Metal headlite bucketW/lip to hold seal

HEADLigHT HARDwARE

Edge ofseal beam

Forward

AGerman

BBraziian

There are two distinctly different headlight rings being offered for the 64up ghia One is a fine repro of the original 64-up ring. The other is a good quality Brazilian ring. It does not look or work like the German ring. But, in pairs, it does the job inexpensively. Look at the cross section diagrams. B, the Brazilian ring, is fatter. Also, note the rear, outer edge of the Brazil-ian ring is sharp, while the front, inner edge, nearest the seal beam bulb, is curled under. A, the German OE style ring, is just the opposite. You can be sure that if a supplier lists headlite rings at the price of a Big Mac dinner for a family of 4, you have found the Brazilian ring.


64-74 Screws Retaining ring to adjusting unit. Fits thru tab on edge of retaining ring. Need 3 per h-lite. Comes with new unit. 3 pak. SPP-04-08ZC

64-74 Screws Adjusting unit to bucket tabs. Not included with new adjust-ing assembiles. Need 3 per bucket. 3 pak. SPP-04-08ZC

56-74 Headlite housing (bucket) like half of a scooped out melon It is the ‘bucket’ that contains the shelf, or lip, holding h-lite seal to body.

Genuine Karmann L or R.Fine repro A ‘Best Buy’. L or R.

KA-809-145KQ-809-145

56-74 Headlite drain tube Cleverly allows water to drain out, not in. Fm Chassis number 146-603-821 and all current buckets. Pair.

KA-941-147KQ-941-147

56-6364-6970-74

Headlite wire grommet Short. Protects wires entering bucket. Ea.

YQ-941-189KQ-971-199YQ-971-907

70-74 Headlite ‘knobby’ wire tube Runs from inner fender to bucket.ReproUSED, Large supply, in good condition. See picture on page 6. Each

KQ-941-167KU-941-167

64-74 Special headlite adjusting screw 40 mm. Has special head for aiming bulb. Need 2 per h-lite. Included with new adjusting assembiles. 2 pak. YQ-941-141

64-74 Retaining ring Tightly holds seal beam to rest of adjusting as-sembly. Included with new adjusting assemblies. YU-941-044


FRonT HooDS

56-65 5 Front hood USED. (Metal luggage compartment lid). KU-823-03165 5-74 Front hood USED. (Metal luggage compartment lid). KU-823-031A57 5-74 Hinge, front hood. USED. LH. Metal ‘J’-shaped piece. KU-823-30157 5-74 Hinge, front hood. USED. RH. Metal ‘J’-shaped piece. KU-823-30257 5-74 Bolt, front hinge to lid. 2 per hinge. 2 pak.

Bolt, hinge to lid, stainless steel. 2 pak.Bolt, hinge to lid, mild steel, galvanized. 2 pak.

BHX-08-16SB BHX-08-16ZB

57 5-74 Spring, front hood. USED. L or R. Each. KU-823-33157 5-74 Special bolt, front hood hinge.USED. L or R. Each. KU-823-345

Front hood

56-65 Guide pin, front hood lock. ‘Male’ pin/spring on hood.Used Repro

KU-823-47KKQ-823-47K

66-74 Guide pin, front hood lock, used YU-823-50K56-65 5 Safety catch ‘J’-shaped catch. USED. Special pin and spring. KU-823-48K

Cotter pin Front hood catch. Pair. CPX-16-16ZB65 5-74 Safety catch Hook moved by ‘tab’ catch. USED. May not look exactly

like yours. Tab length varies. YU-823-507

56-65 565 5-67

68-74

Lock, front hood. Female part resting on lock apron.USED Female part resting on lock apron. LHD.USED Female part. (Cable comes from left).USED Female part. (Cable comes from right) .

KU-823-509YU-823-509DKU-823-509A

65 5-74 Bolt Front hood pin carrier to bottom of hood. Need 2. 5 pak. BHX-06-12ZE56-65 5 Bolt Front lock to hood lock apron. Need 5. 5 pak. BHX-06-12ZE65 5-74 Screw Front lock to hood lock apron. 3 pak. SPP-06-10ZC

58-67 Front hood release cable, with Locking knob. Vert only. Used. VU-823-525Front hood release cable/knob Several styles used in production. This knob is styled after the rear deck lid knob. Galvanized cable and shaft. Polished Delrin knob. H of G. Shorten to 59 7/16 inches (1510 mm).

56-6566-67

White “Ghia” knob Color is era correct thru 65.Black knob, correct for 66-67

KQ-827-53wKQ-827-53B

Consumer Info: Got troubles with the lever assembly located in your glove box (68-74)? Buying a new cable won't solve the problem IF your cardboard (papier-mache) glovebox walls are collapsing! You need to buy a new, plastic glovebox in the Interior Section. You may have to drill out old rivets, and drill new holes in the plastic glovebox. But, finally a box is available that is sturdy enough to not flex when pulling the cable.

68-74 Front hood cable / cable only Metal wire w/stirrup to lever. Cable / stirrup. You may need to shorten. 76 3/8 in. BA-823-531g

68-74 Guide tube Replaces entire protective nylon guide tube.100 in. H of G. This is the correct tubing. KQ-827-545R

Guide pin

56-65.5 Safety catch

65.5-74 Safety catch

56-65.5Lock

65.5-74Lock

Hood hinge

Hood spring

Hood bolt


REAR HooDSEngine Compartment Lid, (deck lid)

Rear decklid, Sheet metal only. 56-6970-74

Used, w/metal non-removable drain tray, specify year.Used, U-provide removable drain tray.

KU-827-205KU-827-207

56-74 Repair piece, lower decklid. A U-weld-um rust repair panel. Covers lower portion of decklid. Best results when you cut out ‘bad’ metal. KQ-827-209

70-74 Drain tray Rear hood, under louvers. Bolts on.Repro, Plastic. Designed so air sleeve doesn’t wear a hole in bot-tom. U-provide tubes, grommets, screws. KQ-827-071USED, OE fiberglass. Most have fiberglass hole worn in bottom. U-provide tubes, grommets, screws. KU-827-071

70-74 Drain hoses for drain tray LH Used, longRH Used, shortRepro, make-do functional replacement. Pair.

KU-827-077KU-827-078KD-827-07P

70-74 Grommets, drain hoses to tray. sold in pairs. KQ-827-07970-74 Expanding rivet Plastic. Holds tray to lid. W/screws. 3 pak. AV-42-60PC56-74 Rear hood hinge Left. W/spring. USED. KU-827-30156-74 Rear hood hinge Right. W/spring. USED. KU-827-30260-74 Guide pin, rear hood lock. Male pin/spring on rear lid. Repro. KQ-823-47K60-74 Guide pin, rear hood lock. Male pin/spring on rear lid. USED.. KU-823-47K

Rear deck lid locks vary mainly in the pattern of the bolt holes holding the lock to the rear apron. Technically, if you are willing to drill a new hole, any year rear lock will mate with any year Ghia. Stubbornly wanting an authentic bolt patterned lock? Order the Ghia Gab reprint, Identifying Rear Deck Lid Locks.

REAR HooD LoCKand parts, cables, housings, etc.

56-60 Rear lock USED. Forward mounting holes inline and face engine. KU-827-50361-67 Rear lock USED. Forward mounting holes staggered. KU-827-503A68-74 Rear lock USED. Forward mounting holes inline and face bumper. KU-827-503B56-74 Bolts, rear decklid lock to rear apron. 5 pak. Need 4 BHX-06-12ZE

Rear decklid release cable/knob Galvanized cable. Correctly shaped Delrin knob. Resists “acid battery breath” superbly.

56-6566-74

White knob Quality. Era color thru 65. Fits all.Black knob Quality. Era color 66-up. Fits all.

KQ-827-531wKQ-827-531B

67-74 Guide tube Protective nylon sheath (cable housing tube) for rear cable. Correct hardness. Won’t compress. KQ-827-545

67-74 Guide tube repair kit 24 + inches of the correct nylon housing, plus joint cover. Repairs all cracked tube tips. Includes KQ-827-547. KQ-827-54RK

67-74 Sleeve, guide tube adapter. Plastic cable housing won’t fit ‘thimble’ in rear lock? Sloppy fit? This 1/2 inch long sleeve is VW’s cure. H of G. KQ-827-547

67-74 Guide Tube Support, brass sleeve mounts to rear seat metal KQ-827-54967-74 Kit, Release cable, guide tube, sleeve, and brass support, KQ-827-54K

Rear lid

Draintray

Grommetsrivets

drain hose

Guide pin

To engine Rear lock

To bumper

Thimble

Note: No mount-ing bolt holes are indicated. Use info beside listed year model

release cable

Guide tube(cable housing)

Rear hood lower inner lip is a design flaw. It catches water, slowly rusting out lower lip. We suggestdipping or treating the decklid to ‘kill’ rust in those drain channels. Good used lids do exist, but virtually all of them will have a certain amount of rust to treat. All rear lids are interchangelable.....to a degree. The differences are mainly script type and locations.But there are other differences to consider as well. When ordering a lid, please call or email with your Vin Number. It will help us determine if we have a correct lid in stock for you


LiCEnSE LiTE HoUSing EDgE TRiM

Consumer Info: You may think you can buy a good, used, lic. lite housing and merely paint and bolt it on. (Plug and play!) Think again! The housing's trim (molding) is always dented. Always! As in, There are no exceptions. Best to rebuild your housing using the trim and clips listed below. Then, never place your Ghia so it can be attacked by other drivers who paral-lel park by sound. With Detroit iron, a gentle tinkle means the bumpers are mating. With VW's, that tinkle means untold chassis violence . AND, the other guy will drive away unscarred!

55-58 5 License lite housing USED, uses flat lenses, rare KU-943-02158 51-74 License lite housing USED. Just the cast metal. No lens, trim, etc. KU-943-021D

All License lite molding (trim) Lic lite trim. German. Aluminum as original . KA-943-193ALic lite trim. Repro. Chrome. Very good. A Best Buy. KQ-943-193

All License lite molding clips Twist tail. Stainless. 4 pak. . KQ-943-19PAll License lite molding end clips "C"-shaped. 2 pak.. KQ-943-20P

License lite lens bulbholders .55-58 558 5-6858 5-68

69-74

Used, rare, uses festoon style bulbNew German OEMUsedUsed, bulb bases connected by gnd wire

KU-943-117KA-943-117DKU-943-117DKU-943-117E

1Fm. ch # 1-676-789

Licence lite housing

trim

seak

lens

screw

Lic. Lite housing

"C" shapedend clipTwist

tailclip

So YoU wAnT A gUARAnTEE!HOW ABOUT A LIFETIME GUARANTEE? wHoSE LiFETiME?

WILL THE LIFETIME BE LIKE ONE OF THOSE PRORATED BATTERY OR TIRE GUARANTEES?JUST WHEN THE BATTERY FAILS, YOU DISCOVER , YEP, THE EXPECTED LIFETIME OF THE PART IS OFFICIALLY OVER?

We, at House of Ghia, look at things a bit differently. Why pretend our parts will last a lifetime, when we all recognize wearable items will eventually wear out. The pleasant retail fiction consumers can buy items lasting "forever", is just that: fiction. Not only does such a guarantee demand an impossibly high quality product; a very well defined definition of "lifetime"; it requires a retailer who is still in business when "life-time" questions come up. Besides, how does a retailer handle two or more quality levels of parts. If both, say, "Gismos" have lifetime guarantees, then isn't price the only real consideration? Weturn the usual lifetime guarantees/warrantees on their head.

We guarantee your satisfaction! You must be pleased with any of our parts! If not, return it for a no hassle refund/replacement. Note, our policy puts the burden just where we think it belongs…on the retailer. If we are not accurate in describing our items, if we unnecessarily inflate product claims…cures gall stones, baldness, and unpleasant personalities; as well as polishes silver and prevents tooth decay…if we create excessive expectations thru product puffery or "creative" advertising; the consumer will have vastly in-flated visions of our parts. Any firm will suffer massive returns when hype created expectations collide with reality. The moment of truth is when the customer opens the box, or tries out the item.

If we are honest in our descriptions, and timid in creating galloping expectations that can't possibly be ful-filled; we will NOT cause the deflated expectations that lead to a flood of returns. Besides, the more a buyer knows, the better a consumer he will be come. And, who better to educate the consumer, than the retailer.


JP-ism: Finding serviceable, COMPLETE doors requires understanding aging. When Ghias were relatively new, finding a complete door made sense. Now? Well, imagine a surgeon trying to repair Joe Average, a 25 year old male, whose heart was damaged by Cupid's Arrow…'Buba' Cupid, all around low life. As a transplant, a heart from a brain dead teenager who thought pleasure was snorting WD-40 sprayed into plastic bags, is found. 'Hey' you say. What a swap!' Fast forward a few decades. Grandpa Moses, a crusty 77, wants restoration. Shopping stores like Cadavers R Us, and Guaranteed Low Mileage Organs, no good pumps are located. Finally, a donor. Percy was hit by 200 psalms, when the song book was accidentally dropped from the choir loft. 'Perfect match!,' cries the salesman at the Tissue World Superstore.' `Why, these gents are only months different in age. What a profitable

coincidence!' Halt! 'Big bucks' and this transplant could happen! But, I'll bet, no life insurance firm will wager money on Grandpa Moses surviving long enough to see Halley's Comet return. Similarly,

what makes you think grabbing a 25 or 30 year old door off the shelf at any wrecking yard, even House of Ghia, would get you a door without most, or all, of the following problems: Scratched glass, worn regulators, loose hinges, thread-bare felt, decapitated guide plugs, 'gripless' door locks, or sloppy lift mechanisms. The door you want? Always the door opened / closed absolutely every time a Ghia is used—a pristine left door. Consumers! Act according to your car's age!

Door Section

From late 56 and up, all Ghia doors will fit the opening and bolt up at the hinges! Incredible! However, they DO differ, almost yearly, at the door lock / striker end, and in other details, mattering only to hardcore restorers. (From Ch. # 2-960-113 up).For pre-60.5 doors, call or email. we do have them in stock on occasion.

All Door skin, outer. Dished metal cup under handle as with ‘68 up. VW never made a door skin, only the more expensive complete shell. Had they, it would be this completeness/quality. Flanged and lipped as OE. Replaces outer skin as assembled at Karmann. Truly nice. Requires drilling spot welds.

Left hand door skin Right hand door skin

KQ-831-077KQ-831-078

60 5-63 LH RH

KU-831-051DKU-831-052D

64-66 LH RH

KU-831-051FKU-831-052F

67 LH RH

KU-831-051gKU-831-052g

68-70 LH RH

KU-831-051HKU-831-052H

71 LH RH

KU-831-051JKU-831-052J

72-74 LH RH

KU-831-051KKU-831-052K

Door shell, Used, empty. You provide internal parts.Note, Coupe and Convertible doors interchangeable

72-74 * *(Stout Side Beam)

LH RH

KU-831-051MKU-831-052M

HingES1up to chassis 1074873, 2from chassis 1074874 to 2395180, 3from chassis 2395181

Rebuilt door hinges

55-571 Early Steel, very HTF Left UpperRight UpperLeft LowerRight Lower

KU-831-401KU-831-402KU-831-411KU-831-412

57-59 52 Steel, HTF Left UpperRight UpperLeft LowerRight Lower

KR-831-401CKR-831-402CKR-831-411CKR-831-412C

59 5-743 Aluminum Left UpperRight UpperLeft LowerRight Lower

KR-831-401DKR-831-402DKR-831-411DKR-831-412D

59 4-743 NEW door hinges, 356 T6 Aircraft aluminum, made in the USA! Gauranteed for as long as you own your Ghia (only for hinges purchased in pairs)

Left UpperRight UpperLeft LowerRight Lower

KQ-831-401DKQ-831-402DKQ-831-411DKQ-831-412D

56-74 Hinge screws Huge # 4, Phillips slotted head. 8 pak. Fixes one hinge.New Countersunk, raised head. Best for new hingesUSED Slots good.

SOP-08-20ZHSOP-08-18UH

Exaggerated"finger cup"

68-74

Upper left hinge

21Door Section

Hinge oil hole plug On top of hinge. 2 pak. Need one per hinge. Not needed with new hinges.

68 5-71 Plug, Pair. From chassis #148-397-900 YB-831-43972-74 Plug, Pair FB-831-439

DooR SEALSAll 4 piece door opening seal set (Seals metal door opening) 2 L&R

main door (down back /bottom of door); & 2 hinge pillar seals (spindly seals NOT moving with door).

German Quality. Until mid 90’s, this seal “family” was the only kit available. Still the best. KA-831-72KGood repro KQ-831-72K

All 2 piece main door seals only Sponge. L and R. Part of above sets. With cast ball (see below).

German KA-831-73PGood repro KQ-831-73P

All 2 piece hinge pillar seals only Sponge. L and R. Don’t move with door. Part of above sets.

German KA-831-71PGood repro KQ-831-71P

All Individual main door sealsLH German KA-831-731CRH German KA-831-732CLH Repro KQ-831-731CRH Repro KQ-831-732C

All Individual hinge pillar sealsLH German KA-831-711ARH German KA-831-712ALH Repro KQ-831-711ARH Repro KQ-831-712A

Quik Tip: Early doors, thru 60, used a main door seal tapering to a fine point. (See drawing B) Elegant, but, casual brushing easily peeled the merely glued seal from the door. Karmann cast a circular ball at the sponge seals end, and provided a small hole (pencil diameter) at the spot where the seal ended. Crush the sponge 'ball', and force it thru the small hole. When released, sponge pops back into shape, but the ball is trapped inside the door. Now, the seal won't be casually knocked loose from the door.

Consumer Info: Door locks (latches) stick out from end of door. The latch, like an iceberg, is only 1/10th seen. 9/10ths are hidden inside the door. The door is secured when the latch and the striker mate. Most Ghia latches have a design flaw; the mechanical worlds equivalent of a rogue, genetic defect. After decades, the question is no longer IF your door latches have the fatal flaw, but WHEN it shows up. Used locks are little help. They, too, carry the fatal flaw. Quickie, ‘do-it-your-self’, cures, (like in-place, tack welding), give only momentary relief…followed by total collapse. (See Ghia Gab reprint: Closing In On Hinges!)

A B

DooR LATCH (LoCK) & DooR oPEning PARTS56-63 Latch LH. USED. Stamped part no. ending in .1L. KU-837-015A64-66 Latch LH. USED. Part no. ending in .2L. KU-837-015B

67 Latch LH. USED. Part no. ending in .3L. . KU-837-015C68-70 Latch LH. USED. Part no. ending in .4L, .5L or .6L . KU-837-015E

71 Latch LH. USED. Part no. ending in .7L. . KU-837-015F72-74 Latch LH. USED. Part no. ending in .8L. . KU-837-015g56-63 Latch RH. USED. Stamped part no. ending in .1R. KU-837-016A64-66 Latch RH. USED. Part no. ending in .2R. . KU-837-016B

67 Latch RH. USED. Part no. ending in .3R. . KU-837-016C68-70 Latch RH. USED. Part no. ending in .4R, .5R. or .6R . KU-837-016E

71 Latch RH. USED. Part no. ending in .7R. . KU-837-016F72-74 Latch RH. USED. Part no. ending in .8R. KU-837-016g56-63 Door latch screws, latch to door shell, 3 pak, stainless (need 3 per) SoP-05-12SD64-74 Door latch screws, latch to door shell, 3 pak, zinc (need 3 per) SoP-06-12ZE

Door openingseal set 4 pc.

Main door sealHinge pillar seal

Typical door lockfrom inside the door,

the 9/10ths never seen

Separateback of

doorlock rod


Pull strap

Remote controlScrews

Dowel pin

Door handlePlug

Spring

Buffer

56-63

64-66

67-74Trigger

Trigger Pull rod

Pull rod Clip

Trim plate

Trim plate screwPlastic finger plate

The Three Styles of:*Door latch (Also called door lock)*Connecting Rod/strap(remote control)*Inner Door "handle"

Like an iceberg, only 10% of door latch parts are visible

See page 24 for a view of the only vis-able door latch parts

64-66

67-70

71-74

Inner door opening trigger Trigger (lever) LH. USED. Split trigger.Trigger (lever) RH. USED. Split trigger.Trigger (lever) LH. USED. Trigger only.Trigger (lever) RH. USED. Trigger only.Trigger (lever) LH. USED. Split trigger.Trigger (lever) RH. USED. Split trigger.

YU-837-019YU-837-020

BU-837-019BBU-837-020B

YU-837-071YU-837-072

Trim plate (escutcheon) Surrounds door opening trigger. Each.64-6764-6768-7068-7071-7471-7471-74

Chrome trim USED. Two screw holes.Chrome trim New. Repro. Chrome plastic.Chrome trim USED. Slanted mount to door.Chrome Trim New. Slanted mount to door.Chrome trim USED. One screw hole.Chrome trim New. Repro. Chromed plastic.Black trim New. Repro. One screw hole.

BU-837-239BBU-837-239YU-837-097YQ-837-097

wU-837-239wQ-837-241wQ-837-239

64-7464-7172-7456-63 56-6356-6356-6364-6664-6664-6667-7467-74 67-74

Finger plate, black plastic. Scratch protector ‘cup’.Screw, inner trigger trim plate to door. 2 pak. Need 1 per door.Screw, inner trigger trim plate to door. 2 pak. Need 1 per door.Door latch remote control, (moves pull strap). LH. USED.Door latch remote control, (moves pull strap). RH. USED.Pull strap Connects remote control with latch. LH. USED.Pull strap Connects remote control with latch. RH. USED.Pull rod Connects trigger/door latch. Wire. L or R. USEDClip Holds pull rod/trigger to door latch. Each. New. 40 mm.Clip Holds pull rod/trigger to door latch. Each. USED. 40 mm.Pull rod Connects trigger to door latch. Wire. L or R. USED.Clip Holds pull rod/trigger to door latch. Each. New. 37.5 mm.Clip Holds pull rod/trigger to door latch. Each. USED. 37.5 mm

YA-83B-247SFP-05-06ZBSPP-05-10SB

KU-837-021KU-837-022KU-837-193KU-837-194

KU-837-193AYA-837-199YU-837-199

KU-837-193BBw-837-199BU-837-199

64-6671-74Split

trigger

67-70Singletrigger

Trim plate

Finger plate

Pull strap 56-63connects lock andinner door handle

Typicalpull rod

64-74

23Door Section

56-63 Door handle, inner. A chrome lever. Qual. BQ-837-225A56-63 Door handle, inner. Good used. BU-837-225A56-63 Dowel pin Holds early handles (and cranks) to shaft. Pr. DPg-03-10ZB

68-7470-7456-63

Used window winder handles are sometimes available, please inquire.

56-66 Window winder handle (crank) Bug shaped knob.Wht. Good buy. BE-837-58w56-66 Window winder handle (crank) Bug shaped knob. Blk. Good buy. BE-837-58B56-66 Dowel pin Holds early window cranks (handle) to shaft. Pr. DPg-03-10ZB

Above winder cranks also fit 67, but niether style / color would be museum stock.

Is your 58-66 Ghia museum correct?

Look closely at the two window crank knobs.A: Is always, always, a Beetle knob.It is the only inexpensive solution.B: Is, has been, and will always be, the correct Ghia knob.

A B

67 Window winder handle (crank), Repro, Chrome with large black knob BQ-837-58C68-69 Window winder handle (crank) Repro. Chrome/blkvinyl. Ea. BQ-837-58D70-74 Window winder handle (crank) Repro. All blk vinyl. Stock look. BQ-837-58H68-74 Screw Holds window crank to shaft. Found under vinyl cover. Pr. SFP-05-10SB

All All Spring Volcano shape. Hidden. Spring tensions door pnl. Repro. Pr. BQ-837-22PAll All Spring Volcano shape. Hidden. Spring tensions door pnl. USED. Pr. BU-837-22PAll Window crank extension (read closely) Accepts only handles

using dowel pins. (Cranks thru 67.) But, works on ANY year serrated shaft; because set screw holds extension to shaft. Handle sticks out further. AQ-837-90K

Buffer (escutcheons)under door lever/wndw crank Scratch proofs upholstery on door panel. 56-63* need 4. 64-74 need 2. Sold prs.

56-5758-6758-6768-6970-7456-67

Ivory (wht) buffers Good repro. Pair. (Ch #1-649-253)Ivory (wht) buffers Good repro. Pair.Black buffers Good repro. Pair.Buffer, OEM. pair. Black.Buffer, OEM. pair. Black.Plug, in end of shaft. Tensioning device for handle. 5 pak.

BQ-83w-235BQ-83w-231BQ-83B-231YA-837-595BA-837-595BA-837-231

Spring (All)

56-57 58-67 68-74

Window crank extension

noTE: Check the Accessories insert for show quality powder coated dash and radio knobs, door handle buffers, heat knobs, and other cool billet parts.

Dowel pin


67-70 Locking rod and knob 1967 thru 1970 ONLY

Push/pull lock rod at back of door L or R. Each. USED. KU-837-183Clip Holds lock rod to door latch. Each. New.USED

Bw-837-319KU-837-320

Knob and collar Door lock rod thru top/back of door. Pair of each RQ-837-18K

Doorlock

knob

Guide

Lockrod

An entire era of outer Ghia door handles ('56-'63) is infested with chrome 'pimples' and deep pot-marks; because a crucial ingredient in zinc die cast (or 'pot' metal) was ignored or was not available. So, everyone has the same problem. Ugly, ravaged chrome. You guessed it…great looking, used, chrome handles for the era seldom exist. Karmann made up for the problem on the 64-74 door handles. They are twice as nice as need be. 'Bullet proof chrome'.

oUTER DooR HAnDLE

56-63 Outer handle LH. USED. W/lock cyl. No key. KU-837-20564-66 Outer handle Hollow BackLH. USED. W/lock cyl. No key. KU-837-205A

67 Outer handle Solid Back, LH. USED W/lock cyl. No key. KU-837-205B56-63 Outer handle RH. USED. W/lock cyl. No key. KU-837-20664-66 Outer handle Hollow Back, RH. USED. W/lock cyl. No key. KU-837-206A

67 Outer handle Solid Back, RH. USED. W/lock cyl. No key. KU-837-206B68-74 Outer handle L or R. USED. W/lock cyl. No key. "B" trigger. KU-837-205D68-74 Outer handle L or R. USED. W/lock cyl. No key. "A" trigger. KU-837-205E

Note: There are two different shapes to the 'trigger' on 68-74 door handles. The handles interchange beautifully. Most people wouldn't realize there is this slight change. But, when buying used or new handles, beware. New handles tend to use an "A" trigger.

A B

68-74 Outer handle L or R. New. 2 keys. Usually “A” trigger. BQ-837-205M68-74 Outer handle kit L And R. New. Keyed the same. Pair. BQ-837-20P68-74 Conversion piece, ‘dog-leg’. Allows use of assembly line, 68-up,

Beetle outer door handles on Ghia. KA-837-21368-74 Screw Holds handle to door shell end. each SoP-06-12ZE72-74 Chrome scratch guard Outer door handle. Neat accessory. Pr. AQ-837-970

56-6756-6768-74

Outer door handle seals, as handle touches door. 4 pc.Outer seals ReproOuter Seals, econo repro, cookie cutter styleOuter seals OEM. Excellent.

KQ-837-24KKE-837-24KBA-837-21K

64-67

Close up viewfrom above

Straight push

56-63

Latch “trip” mechanism early handles from below

Typical 56-67

Typical 68-74

Dog-legged

25Door Section

59 5-74 Check strap repair kit: 2 straps/4 rollers/6 pins Includes parts listed below. From Chassis #2-395-181. KQ-837-25K

Door check strap (rod) Cast rubber, w/internal stiffening metal. Note: All check strap repros are vastly improved from only a few years ago. Rate A.

Quality strap, Each KQ-837-253Pins & Rollers kit: Includes 2 rollers / 3 pins / 3 cir clips. Enough to replace your rollers and pins on one door. KQ-837-255

Check strap

Check straprollerspinsclips

60-74 Rubber alignment wedge Mates with female metal catch on lock pillar.

German The best. EachRepro Good quality. Each

KA-837-277KQ-837-277

Screw Align wedge to door end. 2 per door. 4 pak. SFP-05-20ZDAlignment wedge housing Metal. On lock pillar. Each.

60-63 Rechromed, Larger front lip KR-837-28960-63 USED Larger front lip. . KU-837-28964-7464-74

Rechromed No front lip.USED No front lip. Slight rust.

VR-837-289VU-837-289

60-74 Screw Housing to lock pillar. 2 per door. 4 pak. TFP-42-16ZD

STRiKER PLATESEngage/capture end of door latch.

56-63 Striker Quality. 3 bolt. ‘C’ shaped. Plastic. LH striker RH striker

KQ-837-295KQ-837-296

64-66 Striker Rebuild kit Includes white & black inner pieces to rebuild one striker. KQ-837-290

64-66 Striker Repair Piece Lower black piece only. KQ-837-29164-66 Striker Body, 2-piece, LH, used KU-837-295A64-66 Striker Body, 2-piece, RH, used KU-837-296A67-74 LH striker, repro, KQ-837-295B67-74 RH striker, repro

* Some times used are avalable please call to inquire KQ-837-296B

56-74 Screw Striker plate. 56-63 need 6. 64-up need 4. sold in pairs. SFP-08-35ZB

56-63

64-66Strikers and companion door latch

shapes67-74

Left

Alignment wedge seen

from the backside

Right hand


winDow SLoT PARTSAB

CD

E

F

GGuide plug anti-rattle

Felt clipFelt Window

scraperrubber

Chrome trim

Door slot parts: enlarged and shown from one edge Cross section of typical door slot

A: Window scraperB: Chrome moldingC: Clip, chrome trimD: Anti-rattle plugE: Door glassF: Sheet metal edge

inner door.G: Felt

Window scraper seal Window scraper seal acts like squeege.56-59 Scraper seal Complex scraper held by felt, metal retainer (NYA,

save yours) & special slot clips (NYA, save yours)., sold each KQ-837-475A60-60 5 Scraper Seal, Fm.Ch. # 2-528-668 to 2-960-113. KQ-837-475B60 5-7160 5-71

Scraper seal Quality Repro. H of G. A Best Buy.Scraper seal Decent repro.

KQ-837-475CKD-837-475C

Chrome window scraper trim (molding) Top of door. Holds down seal.

56-59 Used, fits left or right, has 5 slots on underside for retaining screws KU-853-333

61-71 Used Fits L or R. Each, has three slots to slide clips into. KU-853-333C72-74 Repro, left or right (convertible only) KQ-837-471

Used, HTF, Left or right (convertible only) KU-837-47172-74 Repro, Left hand (coupe only) KQ-837-333D

Repro, Right hand (coupe only) KQ-837-334D72-74 Used Left hand (coupe only) KU-837-333D

Used Right hand (coupe only) KU-837-334DTrim clips Holds chrome to top of door.

60-71 Clips Make-do, fit well. 5 per trim. 10 pak. KE-853-33572-74 Clips Plastic. Hold entire scraper unit to door top. 8 pak. KQ-853-335A

All Door slot felt ,OEM. KA-837-479Note: 2 per door thru 59. & 70½ (#140 2306 120) thru 71. All rest 1 per door.

56-74 Felt clips (Press button) Like toothy button tailed Pac-man. 14 pak fixes 2 felt Each

KQ-837-48KKQ-837-487

56-74 Guide plug (anti-rattle) Inner door slot button. Keeps glass from hitting metal slot edge. H of G. 7 per door thru 70½ (vin 140 2306 119). 70½ on 2 per door . KQ-837-491

How to keep the door glass from rattling? Karmann had a problem by the late 50's. As the scraper rubber/door felt wore, the door glass could move wildly from side to side. The door slot was a done design , AND there was no way to install nuts/ keepers on backside of any plug used in the narrow slot. Karmann's idea? Design a plug exactly the diameter of the mounting hole. Any movement of glass brushing the plug would 'cock' it in the hole, keeping it from falling out. Of course, installation meant getting the plug exactly at the right angle in relationship with the hole. A sometimes frustrat-ing task. Freeze the guide plugs. They shrink a little and make installation easier.

Plastic clips72-74 scraper

units

Felt clip

Want to cause a future Ghia restorer much anguish and grief? Never replace your door slot felt. As felt wears, ages the metal clip holding it in place becomes more and more exposed. Finally, when your fuzzies aren't fuzzy anymore, metal clip to glass contact takes place. Yep! Felt clip trauma explain those mysterious 1/4 in. wide bands of light scratches streaking up/down, especially your left hand door glass. The problem can be nearly universal. At one time, House of Ghia had 25 used, left hand convertible door glasses in stock. Not one was immune from light felt clip scratches.

27Door Section

.

Doorpanel

clip

Anti-rattleseal

Top of door/quarter panel covers

Coupe only

56-74 Door/quarter panel clips Holds upholstered panel to door. Modern type . Can be reused. 28 pak does one side.Original Style, Repro, 42 packOriginal style, Used, sold each

KQ-143-893KQ-864-190KU-864-290

56-74 Seal for door panel clips Plastic cup. Receives clip, stops metal to metal squeak as door panels flex. 50 pak does 2 doors. KQ-857-219

72-72 Plastic door top covers Black-grained. Cover inner door top. KQ-867-12172-74 Plastic quarter panel covers Black-grained. Cover top of rear,

inner quarter panel. Coupes only. L&R. KQ-867-123

Door top plastic cover

oUTSiDE MiRRoRSNOTE: used mirrors are sometimes available, most are in just OK condition, inquire for availability and price

56-65 Cowl mounted swan necked mirror Decent repro. Use L or R cowl, or forward 1/2 of fender. Fits all yrs for a classic look. KD-857-513

56-65 Seal Mirror base. Swan necked mirror, just OK, hard rubber. KE-857-53866-67 Palm sized mirror, Karmann Ghia only, bug and type 3 merrors are

not the same.Used, LH, HTF in good condition KU-857-501Used, RH, HTF in good condition KU-857-502

66-74 Door mounted mirror Shaped like 68-74 mirror head. Complete but needs mounting kit below to fit to door.

Repro door mirror LH (drvr door). KQ-857-501BRepro door mirror RH (pass door). KQ-857-502B

66-74 Mounting kit Door mirror. Chrome cover (escutcheon), (diamond, volcano shaped) threaded mounting plate, seal, screws.

Repro Good quality. KQ-857-53KUSED (w/new seal/screws) KU-857-53K

66-74 Seal Mirror base. Door/diamond shaped. Correctly lipped. Quality H of G. KQ-857-539Seal, mirror to body. Econo. Rye cracker hard. KE-857-539

*Used Mirrors for all years are available at times, please inquire

Cowl-mountedswan-necked

mirror

Seal

Door mounted mirror

Mounting kit fordoor mirror

a=45 mmb=96 mmc=32 mmd=33 mm

Where does your "swan-necked" mirror fit?The mirror is a COWL mount rather than a fender or door mount.


DooR gLASSConvertible door glass, Left Hand.

58-59 559 5-74

59 -74

To chassis 2 395 180, usedFrom chassis 2 395 181 >, New, TintedFrom chassis 2 395 181>, used

KU-845-201CVKQ-845-201BCVKU-845-201BCV

Convertible door glass, Right Hand58-59 559 5-74

59 -74

To chassis 2 395 180, usedFrom chassis 2 395 181 >, New, TintedFrom chassis 2 395 181>, used

KU-845-202CVKQ-845-202BCVKU-845-202BCV

59 5-74 Door slot end Rubber bumper. Convert only. H of G, sold in pairs. KQ-837-497Coupe door glass, Left Hand

56-59 559 5-59

60-7460-7172-74

To chassis 2 395 180, usedFrom chassis 2 395 161 to 1 528 667, usedFrom chassis 2 528 668 to end, newFrom chassis 2 528 668 to chassis 141 3200 000, UsedFrom chassis 142 2000 001 to end , used

KU-845-201KU-845-201BKQ-845-201CKU-845-201CKU-845-201D

Coupe door glass, Right Hand

56-59 559 5-59

60-7460-7172-74

To chassis 2 395 180, usedFrom chassis 2 395 161 to 1 528 667, usedFrom chassis 2 528 668 to end, newFrom chassis 2 528 668 to chassis 141 3200 000, UsedFrom chassis 142 2000 001 to end, used

KU-845-202KU-845-202BKQ-845-202CKU-845-202CKU-845-202D

Dotted line shows sharply pointed coupe glass.

Gently curving rear corner is correct

Good teeth

badly worn

Jim P : How do you know if your window regulator is in old age, approaching senility? Window regulators, even a regulator at death's door, seldom stops lifting the glass up and down. They just stop lifting the glass all the way up. Then, human nature being what it is, you crank extra hard on the last inch or so of travel. Close that gap! As surely as death and taxes, what little is left of those last, few crucial gear teeth is ground away. Even if the glass seems to travel all the way 'up', if it does so at a slow and sluggish pace; you'll soon have a death in the door. What's this? You are tempted to use TWO hands on the crank? Your regu-lator is already dead. You should be arrested for corpse abuse. And, please, don't convince yourself, "Just a little grease and this regulator will be as good as new" Look closely at it. See the powerful, 'clockwork' spring? At its center, it is held by a large split rivet. What? The rivet is broken! Think about it. What is the spring's purpose? Of course, it is to help supply

some of the power to lift the glass. That broken split rivet, like cutting Samson's hair, has taken a lot of oomph out of a power lifter. Now, inspect the gear teeth. They should look like gears. What! They rise to so sharp a point it would make a Nail Bed sleeping Yoga advocate nervous. You have major regulator problems! One final note: Let’s say most of your gear teeth are fine; Only 1 or 2 % of the teeth are bad. Lost 2% of the teeth? The regulator is 100% bad.)

Rebuilt window regulator: ,Regulator cleaned; dismantled; huge gear and notched rivet replaced w/stouter version; gear & unit assembled and re-adjusted. H of G.

56-59.5, LH KR-837-501 59.5-63, LH KR-837-501B64-67, LH KR-837-501C68-74, LH KR-837-501D56-59 5, RH KR-837-50259.5-63, RH KR-837-502B64-67, RH KR-837-502C68-74, RH KR-837-502D

62-74 Connecting spring Butterfly-shaped. 3 in. long; Clips to end of lift arm controlled by gear.Butterfly spring fits into/acts as connection between arm and glass lift channel. Each. BA-837-507

Butterfly spring

Lift arm

winDow REgULAToR

29Door Section

Entire seal set on each side Quarter

post set only

Door window seal set: Coupes L & R. Includes both large seals arch-ing across roof and seals on forward edge of Quarter (Q) window post. Kit set seals all exposed door glass edges. (Q-post seals also sold separately.)

56-5960-6566-7166-71

Good quality 4 pieces.Quality repro 4 pieces.Quality repro 4 pieces. H of G.Decent repro 4 pieces.

KQ-845-21KKQ-845-22KKQ-845-23KKD-845-23K

72-74 Window seal set Complex. Vinyl/sponge. “pinch on.” Good repro. PairWindow Seal, LHWindow Seal, RH

KQ-845-24KKQ-845-211KQ-845-212

Quarter window post seal Seals back of door window. Prs. Upright seal on the leading edge of ea. Q-window post.

56-5960-6566-71

Slender Quality. (Works L or R).Well done Quality. (Works L or R).Quality H of G. (Works L or R).

KQ-845-341KQ-845-341AKQ-845-341B

72-74 “Deco” quarter post Seal Alum. molding edge seal. A ‘deco’, not func-tional seal. Doesn’t work like above seals. Only 1/4 inch shows. Prevents metal to glass contact. KQ-845-37P

CoUPE winDow SEALS(Convertibles: see convertible section)

SiLL PLATESDoor threshold cover

Door hinges weak? Door dropping when opened? Install new sill plates without fixing the problem and soon these will be as scratched as your originals.

Sill plates, beautiful. Precision drilled. Satin finish is “dead-on” original. Aluminum with various coat-ings or finishes. Two pieces. (L & R). With mounting screws.

56-6566-74

Satin finish Original finish.Satin finish Original finish.

KQ-85S-37PKQ-85S-38P

winDow TRiM56-74 Rain gutter edge molding L&R. Used, Pair. KU-853-42P

Decorative (deco) quarter-panel chrome trim Coupes only, continuation of window scraper trim on to upper quarter panel.

56-5956-5960-6760-6768-7168-7172-7472-74

LH USED, upper/lower piecesRH USED.upper/lower piecesLH USED.Chrm. Sharp tip.RH USED. Chrm. Sharp tip.LH USED. Rounded tip.RH USED.Rounded tip.LH USED. Aluminum.RH USED. Aluminum.

KU-853-349KU-853-350KU-853-351KU-853-352KU-853-353KU-853-354KU-853-355KU-853-356

72-74 Deco Quarter-post trim, LH, USED, Aluminum KU-853-39772-74 Deco Quarter-post trim, LH, USED, Aluminum KU-853-398

Sharp tip

To rear ofdoor seam

Round tip

Rain gutteredge molding


Aluminum channel 3/8 inch wide. Glued to leading edge of glass.56-59 Slotted for rear of door window seal KQ-847-37P

Left KQ-847-339Right KQ-847-340

60-71 Accepts plastic hinges, allows glass to “pop-out”. KQ-847-38PLeft, used KU-847-041Right, Used KU-847-041

60-71 Bright chrome post Screwed to roof and Q-panel. 3/4 inch wide. Left, post, new reproRight, post, new reproLeft, post. USED, Chrome good to VG. Intact tab at roof and ‘foot’ at top of Q-panel.Right, post. USED, Chrome good to VG. Intact tab at roof and ‘foot’ at top of Q-panel.

KQ-847-339AKQ-847-340A

KU-847-339A

KU-847-340A

The evolution of the

Ghia quarterwindow channel

Seal becomesplastic block.

Both slide inaluminum channelon leading edge ofpost while channelon back edge glues

to face of glass.56-59 60-71

Quarter window glass : USED Glass only.56-5956-5960-7160-7172-7472-74

Left hand Non-pop-out.Right hand Non-pop-out.Left hand Pop-out style.Right hand Pop-out style.Left hand Pop-out style.Right hand Pop-out style.

KU-847-041KU-847-042

KU-847-041AKU-847-042AKU-847-041BKU-847-042B

LH glassas seen from the

Left side of the Ghia

56-59 60-71 72-74

RH glassas seen from the


RH glassas seen from the


No holeAluminum, groove channelRubber seal slides in groove

HoleAluminum grooved channel

Plastic 'hinge' block in groove

HoleGalvanized cap plate with two notches

Metal 'hinge' clips fit into notches

Quarter windowCoupes only

31Quarter Window

TYPICAL MAIN QUAR-TER WINDOW SEAL

QUARTER winDow SEALSQuarter window main seal “C” or “D” shaped large seal surround-ing the quarter window.

56-5960-7172-74

Non pop-out ”C”shape. Quality. Pr.Pop-out “C” shape. Pr. Quality repro. Ea. piece tries to fit L or R.“D” shape, Clamp-on, plastic with sponge. Quality Repro. L&R

KQ-845-32PKQ-845-33PKQ-845-31P

Modern styling in '55, demanded the 'hardtop' look. Trash those heavy, cumbersome support posts holding the door & quarter window glass. Detroit achieved a sexy 'hardtop' look by making quarter window glass disappear into rear fender. Karmann cunningly arrived at the same look by making the quarter window glass stationary, while designing its support post as thin as possible. It is the "If you can't see it, it doesn't exist" trick. But, soon there were complaints about the car's lack of ventilation. Karmann now faced the neat trick of designing a pop-out quarter window; and, yet, keeping a hard-top look. Pop-outs, by their nature, require hefty support pillars. Karmann gained pop-out windows by cleverly borrowing what was already there. Instead of rubber seals sliding in the thin, "almost invisible" aluminum post, 3 one inch long plastic blocks slid up and down the channel. They were 'pinned' in place by self-tapping screws coming in from the front of the chrome post separating the door and quarter panel glass. Being plastic, these blocks had flexibility enough to let the the glass pivot slightly. This allows the back end of the glass to "pop-out". Presto! Ventilation with relatively fixed windows; and, overall, the invisible hardtop look.

56-71

72-74

QUARTER PoST PARTS

60-71 Seal, metal Q-post tab to roof. Excellent repro. Pair. H of G. KQ-847-47P60-71 Seal, curving chrome foot of Q-post as post sets on top of rear quarter

panel. L&R.Quality repro. Lipped. Pair. H of G. KQ-853-34P60-71 Seal, front edge of Q-glass (at rear of post). Good repro. Plastic hinge

notches are not pre-cut. Pair. KE-847-27P60-71 Screw Chrome post upper tab to roof. Pair. SFP-05-10SB60-71 60-71 Screw Chrome post curving foot as it sits on top of Q-panel.

6pak. ToP-35-13SF60-71 Quarter window hinges Tough plastic block, interlocks with alu-

minum trim. Resists crumbling. 6 pak. H of G. KQ-847-31K60-71 Special screw Goes thru chrm Q-post into plastic hinge. 6 pak. TFP-35-13ZE72-74 Metal connecting piece (hinge) Similiar function to plastic

hinge, but is metal and attaches differently. 2 per window. Check avail-ability on price list. KU-847-319

Sealtab to roof

Plastic hinge special screw

Tab to roof screw

Sealfoot to Q-panel

Plastic hinge blocks (6)

Seals, pin thru glass

Seal, front edge of Q-glass


ALUM. / QUARTER winDow SEAL CHAnnEL PARTSMetal molding (trim) between roof and main seals. Great used channels DON'T exist. Ours are decent. Use thumb pressure to shape.

Consumer info: As a manufacturer, Karmann avoided metal to metal contact. It caused squeaks and groans. The chan-nel holding the quarter window seals in place, was a prime candidate for squeaks. Solution? Simply hand fit a thin rubber seal between the channel and roof. But, for speed on Karmann's version of an assembly line, a quick bead of silicone "bathtub caulk" was used on the similar aluminum channel holding the main door seal. However, the crafts-men quickly realized the seal intended for the quarter window, also worked just dandy at covering up gaps/flaws in the door seal channel to roof junction. I estimate 30% of all KG's came with a seal in place of silicone caulking. A seal is an even better idea when reinstalling used channels. The lips on the seal hide gaps and misalignments. Redoing your headliner? We stongly suggest using two sets of G3Q-853-34P.

Extra sealrecommended

Aluminum channel

Screw

As factory intended

Door window channel Arches across the bottom of roof opening. Holds the main door window seal.

56-5960-71

Alum L & R USED.Alum L & R USED.

KU-853-36K KU-853-37K

Quarter window channel Surrounds Q-wndw opening. Accepts main quarter window seal. L&R. USED. KU-853-46K

56-5960-71

Steel, “L” shaped X-section. Stiffens seal.Alum Q-wndw chnnl 4 pc. (L&R/up/low) KU-853-47K

60-71 Seal Under Alum. Channel. (See Consumer Info) 2 strips. gQ-853-34P56-59 Screws 7 pak. Need 14. Holds “L” stiffener in place. TFP-29-95Zg60-71 Screws 10 pak. Need 20 for both door chnnls. Need 22 for all q-win-

dow channels. Oversized for renewed grip. TPP-35-13ZJQUARTER winDow LATCH PARTS

At rear of quarter glass.

Pin Bright, large-headed. Thru glass to knee action lock.60-63 Pin with 2 nostrils pin is threaded, USED. KU-847-22964-74 Smooth face pin Stainless. H of G. Held in place with e-clip, Ea.

Smooth face pin USED. Held in place with e-clip, Ea.YQ-847-229YU-847-229

60-74 Pin gaskets Avoids metal to glass contact as pin goes thru glass. 4 pc. set. Fits both windows. H of G. BQ-847-20K

64-74 Clip Holds smooth headed pin to inside fastener/lock. Pr. wLK-04-XXB60-63 Knee action fastener/ lock, for nostril type pin. USED. Lets glass

pop-out/lock.LH Wht knob only.RH Wht knob only.

KU-847-w81KU-847-w82

64-74 Knee action fastener/ lock, for smooth faced pin. USED. Lets glass pop-out/lock.

LH w/Wht knob.RH w/Wht knob LH w/Chrm knob .RH w/Chrm knob .

KU-847-w83KU-847-w84KU-847-C83KU-847-C84

60-74 Q-window knob Tightens/loosens to lock Q-glass open/ closed.New, WhiteWhite, UsedChrome, Used

YQ-847-245wKU-847-245wKU-847-245C

64-74 Set screw Holds knob to rest of Q-glass fastener. 2 pak. SKH-03-05ZB

Typical 60-63"Two Nostril"chrome pinThreadedUses special tool

Smooth faced chrome pin Typical 64-74

33Convertible Parts

The pleasure gained thru performance of quality products long outlasts the momentary glee gained by obtaining a low price!

Convertible Parts

Warning! Own a glass rear windowed convert? Want to start a mega-buck restoration, FAST? Lower the top with the glass still latched! For now, we can replace the bent and broken pieces. Soon, as the parts supply dries up, you might be driving a Ghia roadster.

Sixty nine and a half (69.5) always refers to mid-69 change from plastic to glass rear window. Ch # 149-431-007

Typicaltop frame

minus header

Reartackstrip

58-67.5

Rearwindow

bow

Earlyheader

Lateheader

Typical header bows

ToP BowS AnD LATCHing PARTS

Wooden top bows ‘Wood is good’! Wood is beautiful! Wood has charisma, character and mystique. Wood is what Karmann used. Wood is also more expensive.

58-69 5 Wood Front header bow KQ-871-50369 5-74 Wood Front header bow KQ-871-50458-67 5 Wood Rear body tack strip (Thru Ch # 147-610-909) KQ-813-91158-69 5 Wood Rear window bow No slot for rear window catch. KQ-871-87169 5-74 Wood Rear window bow Provides for rear window catch. KQ-871-87258-67 5 Wood top bow package All 3 bows for this era. Header/tack

strip/rear window bow. KQ-871-Kw167 5-69 5 Wood top bow package Both bows for this era. Header/rear

window bow. KQ-871-Kw269 5-74 Wood top bow package Both bows for this era. Header/rear

window bow. KQ-871-Kw3

Controversy: Wood verses synthetic (plastic) bows. Since the first polyester fig leaf, Adam and Eve have been bickering over the advantages of synthetic vs. natural products. To this day, no harmony in Eden. Top bows are no different. Plastic and wooden bows each have their supporters. About the only facts both sides agree on are these: 1) Thousands of synthetic bows have been successfully installed. 2) Synthetic bows look positively crude in comparison to finely grained wooden bows. 3) Synthetics cost less…sometimes a lot less. 4) Few people would choose synthetic bows if they were the same price as wooden bows. Virtually all other arguments are biases built on emotion.

EARLY HEADER 58-69.5One central crank

Typical top framewith wooden rear tack strip

58-67.5

LATE HEADER 69.5-74Two levers from sides


RH Sunvisor baseviewed from back

Top locklever

Chromehook

Tip of top frame

Header plate(junction cover)

Specialheader

bolt.

Crank mechanism

Cover plate

Washer

Hook plates

Domed nut

Crank handle

69 5-74 Header bow cover plate: Lays along inner side of header Covers junction of top cover, padding and headliner. Wht plastic. KQ-871-614

69 5-74 Top lock lever assembly W/hook.Bolts to frame. L or ROEM Improved, with pressure release. VA-871-383Excellent repro W/pressure release. VQ-871-382USED Museum stock appearance.Inquire. VU-871-383

69 5-74 Chrome hook Top lock assembly. New levers have hook. Ea. VQ-871-37569 5-74 Centering pin (alignment pin) Chrome. On header. Ea. KQ-871-37169 5-74 Bushing for centering pin Guides chrome centering pin into

windshield frame. ‘Female’. Need 2. Each. VQ-871-373Sun visor base/Top lock (hook catch) Captures hook. Used, sometimes available, inquire.

L/R pair Chrome as on 69.5-71. KQ-871-C8PL/R pair Black as on 72-74. KQ-871-B8P

69 5-74 Screw Sunvisor base to w-shield frame. Need 6. 3 pak. SoP-06-15SCHeader junction plate Header hangs from these plates. Centering pin mounting stud welded to bottom. Big bolt holds it to frame.

58-69 5 Junction Plate LH, USED. KU-871-69158-69 5 Junction Plate RH. , USED. KU-871-69269 5-74 Junction Plate LH. Header mounting plate, new repro KQ-871-691A69 5-74 Junction Plate RH. Header mounting plate, new repro. KQ-871-692A58-69 5 Bolt, Header plate/junction, shouldered KQ-871-507A69 5-74 Bolt, header plate/junction cover. Huge bolt. Shouldered. KQ-871-507B

58-69 5 Crank mechanism Fits into cut-out part of header. Includes gears, arms and huge--whale sized--hooks. USED. Rare. Expensive. KU-871-511

58-69 5 Header bow cover plate Visable from cockpit. Covers gear mechanism. Originals were metal covered with vinyl. These are white pebble-grained plastic. Use as is or cover with vinyl. H of G. KQ-871-613Header Bow Cover plate,used KU-871-613Top latch hook cover plates Decorate area where hooks slip out of header

Chrome, left, usedChrome, Right, used

KU-871-633KU-871-634

58-69 5 Top hook “deco” plates Black grained plastic, pair. KE-871-63P58-69 5 Top latch crank handle Chrome. Knee action. Fine repro. Latches

back on itself. White knob. WCM KQ-871-58758-69 5 Decorative washer Top handle to header. Dollar sized. H of G. KD-871-59558-69 5 Domed nut Top crank handle. Crank handle to shaft. nDX-06-00SA58-69 5 Top handle pulls Chrome. Drawer pull style. Used. KU-871-62

Headerplate

Bushingfor pin

Centeringpin

RH Sunvisor baseviewed from front

35Convertible Parts

ToP FRAME SEALS/CABLES

Consumer Info: With most seals, low quality shows up thru vastly increased installation time. So it is with the following seals. The Econo version may take 5 to 10 times as long to install correctly. The quality differences mainly concern 3 areas: 1) Easy access to the insert bar channel. 2) The softness and flexibility of the rubber. And, 3) How faithfully was the original profile followed. (Some of the extrusion dies were obviously made by machinists who knew nothing of how the seal functioned.) Of these seals, it can be truly said; "Pay me a little more now, and I'll save you a lot of agony ,anger and money, later."

All Vert Windshield frame (pillar) seal These seals, on the leading edge of door glass, remain in place & visable when the top frame is folded. Held by metal insert bar (U- provide).L or R. Pair.

W-shield pillar seals Quality. The best. Pair. KQ-871-92PW-shield pillar seals Decent repro. Insert bar access poor. Harder than above. Pair. KD-871-92P

All Vert Top frame to door glass seal Seals top and back of door window. Appears to be 4 pieces (are matched seals). Hang from bottom/side of top frame. Held by metal insert bar (U-provide). L & R.Top frame seals Supple. Easy insert bar install. The best. KQ-871-93KTop frame seals Decent repro. Insert bar access poor. Harder than above. L/R set. KD-871-93K

All Vert Insert bars Metal. Correctly shaped. Precision drilled. Keeps screw head from pulling thru seal rubber. H of G.

Insert bars, Windshield pillar seals. Pair. KQ-871-90PInsert bars, Top frame seals. 4 pcs. KQ-871-91KScrews, Insert bar kit. 10 pak. Need 40 for w-pillar / top frame insert bars. TFP-29-16ZJ

Headerseal

Windshieldframeseal

Topframeseals

Typicalconvertibledoor win-dow seal inX-section

Insert bar

72-74 Convertibles cleverly used an insert bar on the main header seal. The header seal was no longer sponge, but more like an elaborate door sweep. Several firms repro the seal as a straight extrusion. What this? The insert bar and header are both curved. But, all repro seals are straight? No wonder they don't fit. Suggestion: Use the earlier header seal. It is simple. Easy to install. Effective. (It worked for 15 years). And, cheap, with no insert bar required.

58-71 Header seal Lays between header and top of windshield frame.Simple sponge seal Museum correct 58-71. Use 72-74. See above. VQ-871-349

72-74 Header seal, uses insert bar to attach to header bow KQ-871-60958-69 5 Seal, between header cover plate and gear mechanism. Never seen.

Simple stuffing. KQ-871-605

Two potential problems with wood or synthetic bows. Neither is a product flaw! 1) Installing cabriolet tops requires lots of staples. Quality hardwood or plastic bows are less tolerant of misangled staples (but, therefore, hold staples better) than softwoods, pressboard, or paper tack strips). Many upholsterers, weaned on crude Detroit headers, hurry the tacking pro-cess. Insuring the tack gun is correctly angled to the work brings success. Run and gun or shooting from the hip won't work on quality headers. 2) Convertibles flex! Steel topped cars, don't. VW 'verts rely on pan and rocker structures to provide the only support holding the front and rear halves of the car together. Your pan! Rusted? Rotten? Rockers! Swiss cheese? You'll have flex problems!

Gear cover seal

Header seal


.

Twisted wire cables can be made as cheaply as a budding capitalist's conscience allows; AND still have the look of quality. Figure 1 x19 lays down 1 strand of wire and twists 19 similar strands around this center. Figure 7 x7 lays down a central core of seven fine strands and twists 6 similar bundles around the core. Figure 7x19 uses 19 very fine strands to make a core and then uses 7 of these 19 strand bundles to make a cable. Given that each diagram represents the same overall diameter cable, which wire is the most flexible? Sure! 7x19 strand by a huge margin. Which will be the cheapest? Which is stongest? Rule of thumb! The more flexible the cable, the less strength. Strong, truly flexible cable is expensive. Suppose each strand is made of mild steel. Oops! The most flexible mild steel cable (7x19) now becomes the cable with the shortest life span. Why? Because each tiny strand rusts easily. Why not use stainless steel? Cost, of course. Want even more strength (for a price)? Braided instead of twisted wire is super strong. Unfortunately, claiming one's wire is "Aircraft cable" is meaningless. No industry standards! Does it mean surplus Albanian Airforce wire? Or?? Be assured! House of Ghia does not play "games" with either the quality or price of our top cables. We use the finest cable. It exceeds OEM cable in strength, flexibility, longevity.

ToP CABLESTensioning cables.

Figure 1x19 Figure 7x7 Figure 7x19

67 5-74 Rear of body cable Holds top to rear of body. Stainless. Quality. (Ch # 147-610-910) Hof G. KQ-871-957

69 5-74 Rear window top cable Defines rear window opening. Stainless. Quality. Glass window only. KQ-871-959

60-74 Side of top cables Defines door window opening. Quality. Stain-less. Sold as a pair. H of G. VQ-871-95P

60-74 Spring For side of top cables above. Pair. Need two. KQ-871-95P

Arrow points tothreaded cable end

Side of top cable gLASS REAR winDow SEAL/PARTS

69 5-74 Glass rear window Reuse clamps, hooks, etc. (Check for availability.)NOS w/metal frame No heating wires. Genuine VW. KA-845-502Quality repro glass German. With holes. Use your metal frame. KQ-845-502USED w/metal frame Cannot guarantee heating wires work. KU-845-502

69 5-74 Drain hose Glass rr wnd frame.Stout, clear metric vinyl. Pr. Not shown. KE-813-66P

69 5-74 Convt rear window seal kit: Fills, protects both sides of all holes in ‘vert glass window. Includes: 2 hinge seals, 1 catch hook, gasket, 1 seal for the threaded plate, and 4 seals for both sidses of the glass at point where the large headed screw goes thru the glass. H of G KQ-871-31K

69 5-74 Hinge seals Keeps hinge from touching glass. Shaped like dress shoe heel. Need 2. Pair. (Part of above kit.) H of G. KQ-871-315

69 5-74 Rear window catch hook seal Shaped like Magoo’s glasses. Each. H of G. (Part of above kit.) KQ-871-327

69 5-74 Seal Convert. Rear window frame. Fits around edge of rear glass in metal frame. This seal then contacts the seal sewn into the top covers rear window opening. KQ-845-521

69 5-74 Rear window catch Attaches to roof. (Not shown)Original style catch Complex. Lots of precision, jewellike mov-ing parts. Mega $$$., HTF KA-871-319Original style catch, repro KQ-871-319Simplified catch Doesn’t look / work like original. Does job with quiet elegence. A catch like Detroit would have built it. Simple. Sturdy. Practical. Not a piece of jewelry. KE-871-319

(shown on next page)

(shown on next page)

(not shown)

(not shown)

37Convertible Parts

Threaded plate

SealsHoles in glass

Catch hook seal

Catch hook

Large headed bolt

Catch hook seal

SealHinge seal

Large headed

bolt Hinge

69 5-74 Special, large-headed, slotted, bright metal screws. Each. On inside of glass. One per hinge/two on catch. Glass window only.

New Stainless. “A forever part!”USED Fine shape. Chrome.

KQ-871-317KU-871-317

69 5-74 Threaded plate Outside of glass window. Holds window catch hook. From outside looks like 1/2 a chrome Vienna sausage.USED. KU-871-325

69 5-74 Hinge nut, Huge head w/tightening tool holes. Outside. Need 2.New Excellent. Ea. U-paint.U-repaint USED.

KQ-871-313KU-871-313

69 5-74 Rear window catch hook The part of the catch found bolted to window. Will NOT solve usual catch problems. USED. KU-871-321

69 5-74 Rear window hinge L&R. Bolt to body and inside of glass.LH USED.RH USED.

KU-871-309KU-871-310

69 5-74 Bolts Rear window hinge to body. 4 pak. (Not shown) BHX-06-16ZD

REAR SEAT RETAining HARDwARE (ConVERTiBLE onLY)Holds seat back up-right.

Rear seat strap Similar to coupe strap.58-65 White, rubber "bunge" strap. V. good. KQ-H85-58w

58-67 5 Black, rubber "bunge" strap. V. good. KQ-H85-58B69 5-74 Rear seat retaining clip L and R. Cast plastic. Like a stunted

clothes-line clip with a tail. H of G.White plastic clip Complex. Pair. KQ-H85-50PBlack plastic clip Complex. Pair. KQ-H85-52PMetal pin for above clips Each. KQ-H85-589Screws, Vert seat clips. Uses YOUR "U"- nuts. 4 pak. SPP-04-16ZDKit, for mounting vert seat clips/screws, U-nuts. replaces lost U-nuts. 8 pc. kit. AUV-11-625H


Left handMetal portionof top frame

58-69 5(As seen from left)

Intermediate bow bolt

Intermediate bow

Tip of frame

Lower guide bar bolt

Top frame bushingMates with lower guide bar bolt

"Foot" of frame. 3 bolts per.

Main guide bar bolt

Rear window bowpartly wood

Frankensteinneck bolt

(Main hinge bolt)

58-74 Intermediate bow Lite, tubular metal bow between header and rear window bow. Stainless steel. Better than OEM. H of G. KQ-871-735

58-74 Grommet, intermediate bow. At intermediate bow ends. Stops metal to metal contact. Pair. H of G. KQ-871-749

58-74 Bolt, intermediate bow. Shouldered bolt. Allows slight lateral move-ment of intermediate bow. W/nut. Need 2. Sold each. H of G. KQ-871-745

61-74 Bushing, top frame hinge. Inner hole specially shaped like human hip socket. Mates w/ “ball” on guide bar bolt.Sold ea. H of G. KQ-871-829

61-74 Bolt, lower guide bar. A miniature “trailer hitchball” is placed in the CENTER of bolt. Bolt mates with above bushing. Bushing and bolt needed to prevent top frame “arthritis”. Sold ea. H of G. KQ-871-827

63 5-74 Bolt, main hinge. (Ch # 6-264-621 up) Allows main hinge to pivot. Looks like it came from a Frankenstein Erector Set. Large. Long. Threaded on both ends, hex flats for wrench in “center”. Need 2. Sold each. H of G. KQ-871-855

58-69 5 Bolt, main guide bar. (Ch #145-644-101-Mid-65). Four bolts needed thru Two used from there thru 69.5. These shouldered bolts were slowly replaced by rivets. H of G. Each. KQ-871-825

58-74 Bolts, frame “foot” to body. S Steel. 6 pak. (Not shown.) BHX-10-20SF58-74 Special coat hook Convertible only. Unlike sedan, these hang

straight down.Need 2. Each. (Not for seat belt). Black plastic NewChrome, used

KA-857-637BKU-857-637C

58-71 Snap Catch, LH, Chrome, pictured, used KU-871-90158-71 Snap Catch, RH, Chrome, pictured, used KU-871-90172-74 Snap Catch, LH, used, not pictured KU-871-901A72-74 Snap Catch, RH, used, not pictured KU-871-902A

Frame "foot"bolts to body

Tip of frameheader hanging plate

bolts in here

Guide bar bushingGuide bar bolt

Intermediate bow bolt

Intermediate bow grommet

Rear window bowPartly wood

Nut

Intermediate bow/tubular metal

METAL FRAME PARTS/BoLTS

Right handMetal portionof top frame

69 5-74(As seen from left)

Frankensteinneck bolt

Shoulderedheader plate

bolt

Set screw Main guide bar bolt

39Convertible Parts

ConVERTiBLE REAR "TUB" PARTSor rear seat area

Note: 58-69.5 hinge covers were originally metal covered with upholstery vinyl. Our panels look great as is; or they, too, may be covered with seat cover vinyl for a totally assembly line look.

Early hinge covers

Late hinge cover

Top compartment lining2 years only!

Rubber lockpillar cover

Vinylgrained

coverChromeplate

Strange, "side-saddle"convert. rear seat hinge

Convertible quarter panel hinge covers Easy installation. Save your add-on’s. ABS Pebble grained plastic. H of G.

58-66 3 Hinge covers (Thru Ch # 146-349-691) No seat belt hole. Look great! L&R pair White, pebble grained plastic. .Black, pebble grained plastic

KQ-867-30wKQ-867-30B

66 3-69 5 Hinge covers (Thru Ch # 149-427-007) W/seat belt hole. Look great! L&R pair White, pebble-grained plastic. Black, pebble grained plastic

KQ-867-31wKQ-867-31B

69 5-74 Hinge covers (Glass rear windowed ‘verts) Authentically styled. white, pebble grained plastic. L&RBlack, pebble grained plastic

KQ-867-03wKQ-867-03B

68-72 5 3-point seat belt hook Riveted to hinge covers. White plastic. Pair. BA-857-72P69 5-74 Rubber stop Bolted to hinge cover. A stop for the rear seat. Each. KQ-867-10969 5-74 Screw, rubber stop to hinge covers. Pair. TPP-55-25ZB

67 5-69 5 Top compartment plastic lining 2 years only. Runs from side to side under plastic rear window. KU-867-637

58-74 Rubber, lock pillar protective cover. Covers the top of the leading edge of the rear quarter panel. L/R pair. H of G. KQ-853-36P

58-74 Large-headed, bright metal rivet. Holds the lock pillar rubber cover to knife edge of quarter panel. Check availability. Ea. KQ-853-369

60-74 “Chrome” lock pillar decorative plate This ornamental, bright metal plate holds down a portion of the rubber lock pillar cover. L and R specific. Pair

58-59, Left, Repro58-59, Right, Repro58-59, Left, Used58-59, Right, Used60-74, Left, Repro60-74, Right, Repro60-74, Left, Used60-74, Right, Used.

KQ-853-365AKQ-853-366AKU-853-365AKU-853-366AKQ-853-365BKQ-853-366BKU-853-365BKU-853-366B

67-74 Decorative black vinyl ‘ridge cover’ Along knife edge of rear quarter panel. Grained. Pair. KQ-867-307

58-74 Convertible rear seat wooden frame When padded and covered with convertible rear seat cover, (see seat cover section) this replaces perfectly the original seat. (Or, on 73-74 ‘verts, that only came with a flat tool compartment cover, adapts seat where one wasn’t). (Also see hinges and retaining hardware below) KD-885-03K

58-72 Convertible rear seat hinge For fold down rear seat back. Coupes use simple “piano hinge”. Vert’s work from the side. Needed with above seat frame. Need 2. Sold each. H of G KQ-885-571

73-74 Convertible rear seat hinge Piano hinge. Its not really a rear seat, more of a cover panel. This hinge is used for all coupe rear seat backs also. KU-885-571A


Rockersalso called sidemembers, heat channels, rocker box, sills

(by any name, the foundation of a Ghia body)

Let’s build a Ghia rocker, the foundation for the entire car. Most of a rocker structure or “box” can’t be seen, so we’ll build the straight section under the doors first and add the “branches” later. Because these pieces are so uniformly long, and narrow, we’ve pictured only the last few inches. When we finish, we will have constructed a rocker “box” for the right hand or passenger side.

Start with a 4 foot long piece of metal that isn’t much more than 4 inches high. That’s what we’ll call the central divider. The rocker’s central divider, is never ever seen (Step 1). Now, add a vaguely “C” shaped piece of metal (also 4 inches high and 4 feet long). This piece too, is seldom seen, but it can be viewed if the carpet under the door is pryed up . So, let’s call it the rocker’s carpet wall (Step 2).

By welding these two pieces of metal together (Step 3), you’ve created a 4 foot long hollow metal straw. Air, heated and pushed by the engine, uses this hollow chamber as a highway. The hot air ends up at outlets near the driver’s toes. (Air is even pushed to the dash defroster vents.) “Caged” or blind nuts are installed in a flat horizontal section of the rocker’s carpet wall. This al-lows the rocker to be bolted to the Ghia’s frame or pan.

By design, this hollow straw is exceptionally light-weight; yet, very strong. By adding an addi-tional piece of metal (Step 4), the rocker structure can be dramatically strengthened at little penalty in weight.

Let’s call this third piece of metal (Step 5) the outer rocker. It is the only easily seen part of the rocker structure. At that, only a 3 foot section, directly under the door, is visable.

These three rocker pieces: carpet wall, central divider, and outer rocker cover are all that is need-ed to make a stout foundation for a coupe’s body. But, a convertible doesn’t have the extra rigid-ity a coupe’s metal roof adds. So, for more strength, the factory installed a convertible stiffening plate (Step 6) between the central divider and the outer cover. The convertible stiffener is little more than a piece of channel iron “Swiss-cheesed” for lightness. Thus, four pieces make up the rocker of a convertible. (The factory sold a replacement part they called a side member. It was merely a pre-welded central divider and carpet wall. Once, over the parts counter, side members cost an easy $1500).

A Ghia’s foundation could run straight along the car’s entire edge. But, the wheels get in the way. Forward of the doors, the rocker curves, or bends, inward to avoid the tire.

This curving, or dog-legged, piece is seen by lifting the carpet at the base of the area known as the “kick panel”. We’ll call it the kick panel base (Step 7). A kick panel base looks like an upside down, curving section of household rain gutter. To make the kick panel base into a straw, weld on a flat bottom. The flat bottom would contain caged nuts allowing frame, or pan, to bolt to the rockers. Add the curving kick panel to the end of the heat channel portion of the rocker and create the entire inner rocker area (Step 8).

BUiLDing A gHiA’S RoCKER STRUCTUREREAD - ME - FIRST

STEP 1

STEP 2

STEP 3

STEP 4

STEP 5

STEP 6 STEP 7 STEP 8

41Rockers

Visibleseam to seam

Convertiblestiffener

Also would superstiffen a coupe body

Since the rockers are seldom seen, but absolutely vital; first read, Building a Ghia Rocker Structure, before trying to figure out how each diagram/description works. More than on most of our catalog drawings; what you see pictured is for effect, or training purposes, rather than an exact, visual representation of the part.

All repro heat channel sheetmetal is patterned after the 69-74 heat channels. They will fit the 56-68 model years, but will require some modification.

Kick panel base portionof heat channel.

Mounting base platew/caged nuts

Straight section of inner rocker (heat channel)Also called side-member

Outer rocker (skin)

Kickpanel

curvingportion

Central divider/carpet wall

When welded togetherthese 2 pieces create

the heat channel

All Outer rocker Mild steel. Part of this ‘skin’ only ‘seeable’ rocker metal. Part of skin hidden, forming double walled metal.

LH, OE correct. 54 in. Partly seen ‘tween under door seams.RH, OE correct. 54 in. Partly seen ‘tween under door seams.

KQ-801-047KQ-801-048

All Convertible stiffener (Side member reinforcement.) From seam to seam. Approx 42 in. Makes ‘vert body rigid. Weld in place.

Mild steel stiffener Opened holes. OE correct. Great fit.LH convertible stiffener RH convertible stiffener

KQ-801-131KQ-801-132

Mild steel stiffener Stamped but not opened holes. Very stout. Very long lasting. Universal L or R.

L or R stiffener Universal. Welds with ordinary techniques. Very stiff. KQ-801-S31

69-74 Central divider/carpet wall Welded together create hollow heat channel. Basically, the section under the door.

Mild steel Galvanized, U-weld-um.Central Divider Carpet Wall No pre-cut heater outlet or inlet hole.

KE-801-M35KE-801-M36

Pre-welded Superbly formed. Mild steel, w/caged nuts. Au-thentic stiffening ribs-grooves. Well done. Not cheap. Heater outlet is in the side of rocker, as with 69-74 models.

LH, OE correct heater outlet. Inlet hole, pre-cut.RH, OE correct heater outlet. Inlet hole, pre-cut.

KQ-801-035KQ-801-036

69-74 Kick panel base Curving, front of rocker piece. Mild steel. Galva-nized. U-weld curving channel to base plate, forming entire hollow duct. Looks like up-side down section of house rain gutter. no shark gill shaped heater outlet as found on 56-68 models.

LH curving channel No heat outlet opened.RH curving channel No heat outlet opened.LH base plate, curving channel. W/caged nuts.RH base plate, curving channel. W/caged nuts.

KQ-801-041KQ-801-042KQ-801-043KQ-801-044

69-74 Entire side member Straight and curved sections pre-welded. Front to rear approx. 72 in. long. . Excellent.

LH mild steel OE correct. Heat outlet on side.RH mild steel OE correct. Heat outlet on side.

KQ-801-045KQ-801-046


69 Rubber valve Side-member. Need 4. Ea. (Not Shown) BA-801-17771-74 Coupe Plug, rear of rocker. ‘Verts. 20 mm. Need 4. Ea.

Vert Plug, rear of rocker. Cpes. 23 mm. Need 2. Ea.BA-831-499UA-831-449

All Inner rear quarter, lower. (Side-member extension). This sheet metal piece backs up the torsion cover hole.

LH Holds torsion cover in place. ‘Double skins’ panel.RH Holds torsion cover in place.’Double skins’ panel.

KQ-801-203KQ-801-204

Inner rear quarter, lower panel

Nests like spoonsinto back of outer panel

Front noseInner fender panels, luggage floor, fresh air ducts.

60-74 Front ‘nose’, or front panel. Just the sheet metal.Nose OEM. Karmann. Beautiful. Expensive. Rare. KA-805-065Nose German repro. Excellent. A gorgeous ‘nose’. Requires open-ing bumper arm slot, horn opening, and grille slots. Save your jack clamp and nostril adapters. KQ-805-065

60-74 Nostril adapters U-weld & open slots. Changes vent grille from “tearduct”shaped to square at leading edge of boxy fresh air duct. Use w/repro nose if originals not saveable.

Nostril kit both L and R 4 pcs. A Best Buy.Nostril, LH only. 2 pieces.Nostril, RH only. 2 pieces.

KQ-805-06K KQ-805-06LKQ-805-06R

56-74 Front apron (spare tire floor) sheet metal seen atbottom of the spare tire well10 in up from the bottomseam and 36 in wide. That’s center to center on innerwheelhouse front, which just touches back of this panel. KQ-805-069

56-71 Front bumper attaching bracket Welded to front w-hse. Seen at inner wheelhouse base in spare tire area. If bracket and/or lower w/house is bent; bumper arm will not fit correctly.

NOS L or R.German . L or R.Econo L or R

BA-809-131BQ-809-131BE-809-131

72-74 Square bumper adapter box for front bmpr arm Welded to outer side of wheelhouse. Not seen unless looking under fender.

LH bmpr arm adapter bracket Sheet metal box. NYA.RH bmpr arm adapter bracket Sheet metal box. NYA.LH bmpr arm adapter bracket Sheet metal box. Used.RH bmpr arm adapter bracket Sheet metal box. Used

KQ-805-073KQ-805-074KU-805-073KU-805-074

wHEELHoUSE

Bumperattaching

bracket

43Front Nose

Karmann Ghias! The backbone of a Beetle. The looks of a Mona Lisa. The price tag of a Buick.

56-74 Front section of wheelhouse Metal extends back beyond front edge of fuel tank opening. Save your attachments. (i.e. jack clamp, rect-angular air duct “box”, bumper attaching brackets).

LH Repro repair panel.RH Repro repair panel.

KQ-805-077KQ-805-078

56-74 Seal, between wheelhouse edge and back of nose. KQ-805-75P56-74 Air duct tubular section Runs horizontally along outer rear of w-

house. Welds to box-like front portion of fresh air duct. Repro.LH Long and narrow. Seen on outer side of w-hse.RH Long and narrow. Seen on outer side of w-hse.

KQ-805-079KQ-805-080

56-74 Backing plate for tubular air duct It is not only “backside” of tubed part of air duct, it is the top 5 inches of rear of inner wheelhouse. Seen just above the fuel tank. Butts against hood seal channel. Repro.

LH (rear piece). RH (rear piece).

KQ-801-081KQ-801-082

56-74 Fresh air box Front connects to nostril adapter and rear goesto tubular air duct Boxy looking. Seen on outside of wheelhouse.

LH Repro.RH Repro.

KQ-801-083KQ-801-084

56-74 Wheelhouse to kickpanel base ‘Spoons’, with a portion of kick-panel base (K-H01-041/4) to form one of the many doublewalled Ghia body panels. Seen straight back of front tire. Repro.

LH RH

KQ-801-087KQ-801-088

Front section of wheelhouse Backing plate (for air duct)Wheelhouse

To kick panel base

Fresh air box fits on front section of w/hse. Tubular air duct fits to

back of box

air duct tubular section

Fresh airbox

Wheelhouseto kickpanel

base

Consumer Info: Installing fenders or rust repair panels? Cutting, massaging, finessing, welding and tal-ent are needed to correctly install Ghia sheet metal. Quick-buck operators give rust repair panels a bad name. Pop-rivet them on. Slap on lots of "bondo". Paint for $49.95. And re-sell quickly before the fender rots off. That's one way! In your haste to condemn the quick-buck method, don't mistake the quality of our panels. Installed correctly, these are as stout, good looking and long-lasting as original metal.

Windshield frame Convt. only. USED. Top 6 to 8 inch.58-69 569 5-74

W/frame for ‘vert header using one central hndl W/frame for ‘vert header using two lvr/hooks

KU-805-111BKU-805-111C

60-74 Plug, door hinge pillar. Need 2. Sold pair. BA-831-44P56-74 Lower hinge pillar At its bottom end hinge pillar mates with rocker

kickpanel base. Only see when door opened. Includes cage structure for lower hinge mount. Reuse your caged threaded plate. Shaped like original. If loose/rusted, massive cowl shake.

LH To 3 in. above lower hinge.RH To 3 in. above lower hinge.

KQ-805-343KQ-805-344

Convertiblewindshield

frame

Door frameLower hinge

pillar


Imagine this scene Returning from 6 months of life in tropical heat, you've just thrown away and burned every last piece of smelly, rotting clothing you own. Now, to hit the shower! Just as you start to rinse, comes a loud knocking on your door. "The Pope is here. (Or the President, Mother Teresa, or 60 Minutes…take your pick.) Suddenly, as you frantically search the closets, you remember burning all your clothes. You ASSUMED you could get clean clothes. What should be the proudest moment of your life…and you have to meet it with all your shortcomings exposed for the whole world to view. Never as-sume! Just because House of Ghia lists fenders and other neat, rare goodies in their catalog, it doesn't mean, when you need them, they will be available. On crucial parts whose availability is fast dwindling, the best advice has ALWAYS BEEN: Get all of your vital parts before beginning restoration.

56-67 Mud plate, no sealing extension. Also called hinge pillar cover or mud sill. Seen behind front tire. These panels work on later KGs with caulking to simulate the extension attached to later plates and sealing hood seal channel’s back side.

Mild steel LH, Good repro.. . RH, Good ReproNever rust plastic L/R pair, Good repro.USED Vertical panel. LH only. HTF in good condition USED Vertical panel. RH only.HTF in good condition

KQ-805-377KQ-805-378KE-805-37PKU-805-377KU-805-378

68-74 Mud plate, with sealing extension.

New LH.New RH.USED LH.USED RH.

KQ-805-377AKQ-805-378AKU-805-377AKU-805-378A

Mud plate seal Found at outer edge of mud plate. Pr. This seal is also used at front edge of whlhouse as it touches back of nose. KQ-805-75PFront hood lock carrier panel Found at back of nose panel.

56-6565-74

USED To Ch# 145-108-103USED Fm. Ch# 145-108-104

KU-805-565KU-805-566

56-74 Main wheelhouse cross-brace, front. The inner front panel. Holds inner fender panels “apart”. Acts also as a portion of the gas tank open-ing. Usually includes lower front cross-brace below. Forward portion sharply angles downward; and, on various models, holds the brake fluid reservoirs, and/or plastic washer bottle KU-805-503

56-74 Lower wheelhouse cross-brace, front. The lower, inner front panel. Bottom edge of this panel almost touches the backside bottom of a stock nose panel. (Panel comes with KU-805-503, above)

KQ-805-583

Mud platewith

forwardsealing

extension

Mud plate

Main front cross-braceincludes both pieces

Lower front cross-brace

45Fenders

Don’t want to spend your lottery winnings on a NOS ‘vert quarter panel? Our advice? “Skin a coupe” to fix a convertible.

FendersAlso known as side or quarter panels.

Full fenders must be sent by truck freight. Call for estimate.

60-69 USED, LH fender. May need parklite hole modifications. KU-809-021B60-69 OEM, LH fender. Parklite holes must be filled/re-drilled for 60-64.5

Ghias. Suggest all years use current headlite buckets. KA-809-021B60-67 USED, RH fender. No tank opening.May need p-lite hole mods. KU-809-022B68-69 USED, RH fender. Has tank opening. Use your gas flap, bib, etc. KU-809-022D68-69 OEM, RH fender. Has tank opening. Use your gas flap, bib, etc. NLA KA-809-022D70-74 USED, LH fender. P-lite opening, era correct. May need to move bum-

per arm slot. KU-809-021E70-74 OEM, LH fender. P-lite opening, era correct. May need to move bum-

per arm slot. KA-809-021F70-74 USED, RH fender. P-lite opening, era correct.May need to move bum-

per arm slot. Use yourgas flap, bib, spring, etc. KU-809-022E70-74 OEM, RH fender. P-lite opening, era correct. May need to move bum-

per arm slot. KA-809-022FCoUPE REAR QUARTER PAnEL

Complete: From door to edge rear seal channel. Please check availability before ordering.

55-59 USED, LH, may need slight modification for taillite bulbholder KU-809-08755-59 USED, RH, may need slight modification for taillite bulbholder KU-809-08860-66 USED, LH Q-panel. Lower, rear panel (near taillite) is unique. KU-809-087A60-66 USED, RH Q-panel. Lower, rear panel (near taillite) is unique. KU-809-088A67-69 USED, LH Q-panel. Rear of body mounting point on inner wheelhouse

may differ from your yr. Lower, rear rust repair panel fits fine. KU-809-087C67-69 USED, RH Q-panel. Rear of body mounting point on inner wheelhouse

may differ from your yr. Lower, rear rust repair panel fits fine. KU-809-088C70-71 USED, LH Q-panel. T-lite area unique. No reflector, fill holes. KU-809-087D70-71 USED, RH Q-panel. T-lite area unique. No reflector, fill holes. KU-809-088D72-74 USED, LH Q-panel. T-lite area unique. KU-809-087E72-74 USED, RH Q-panel. T-lite area unique. KU-809-088E

FRonT FEnDER RUST REPAiR PAnELS/PARTS56-59 Lower rear front fender Extends above molding trim line.

LH, front fender, lwr rr section. Handcrafted. NYARH, front fender, lwr rr section. Handcrafted. W/badge indent.NYA

KQ-809-095KQ-809-096

60-74 Lower rear front fender Clip hole location indented,not punched.13 in. high. No badge indent on RH side.

LH, front fender, lower rear section. Won’t fit pre-60.RH, front fender, lower rear section. Won’t fit pre-60.

KQ-809-097KQ-809-098

FRonT FEnDERSComplete: NOT included are h-lite buckets/aiming units. Cutting and welding are needed for installation.

Front fenders & Nose panels: The two areas with the greatest customer interest and demand are also the two items in least sup-ply. One need not be an economic genius to see the expensive hand of supply and demand dominating the price of fenders.

ConvertibleCoupe

Torsion coverFront fenderlower rear

Fender"breast"

Headlitebucket

Lower rear section of left front fender


60-74 Headlite tip, front fender. Rust repair panel. Extends 3 in. back from leading edge of fender. Includes part of formed lip for 70-74 p-lite opening. (60-69 Ghias trim this off.) H-lite opening lipped, as OE. U-provide bucket. OE & repro headlite buckets fit perfectly. USA.

LH, headlite panel. Tip of fender.RH, headlite panel. Tip of fender.

KQ-809-105KQ-809-106

Breast of front fender Includes hdlite tip section. Continues “down” fender to bottom lip. (A Karmann repair section. Welds in at fac-tory seams.) Only difference in years is location of p-lite. opening.

60-6970-7460-6970-74

LH (Front of front fender.)NLALH (Front of front fender.) NLARH (Front of front fender.) NLARH (Front of front fender.) NLA

KA-809-107BKA-809-107CKA-809-108BKA-809-108C

Inquire about the availability of used panels

The headlite bucket looks like half a scooped out melon. The bucket tip forms the necessary lip for headlite ring/seal. Your headlite area ever damaged? Replacing buckets restores chrome/seal gap. 70-80% of all Ghias need at least one bucket replacement. A beautiful paint job actually highlites crummy fitting chrome and seal. Do your fender a favor.

Yr of Ghia How later (64-74) headlite buckets work!

56-59 Any bucket listed works IF you use 64.5 up chrome rings and adjusting assemblies. Results? Headlite unit is not flush to fender. Far easier bulb adjustment. But, it won’t look museum stock. Only one in a thousand can “see” difference. Your era parts won’t fit the newer buckets.

60-64.5 Any bucket listed works, and looks authentic, IF you use 64.5 and up chrome rings and adjusting assemblies. Your era parts won’t fit the newer buckets. What? You are missing some of your era chrome or adjusting parts? It will be easier/cheaper to buy all new buckets, chrome, adjusting assemblies rather than find high dollar NOS early bucket parts. Results? Undetectable from stock, EXCEPT headlites adjust easier.

64.5-74 Any buckets listed workbeautifully. And, so they should. They were made for this era.

56-74 Headlite bucket L or R. OEM Karmann. KA-809-14556-74 56-74 Headlite bucket L or R. Fine repro. A Best Buy. KQ-809-145

A: Front apron KQ-805-069B: Headlite panel KQ-809-105/6C: Fuel tank opening KE-809-901D: Rear apron KQ-813-301E: 67-71 Lwr rear Q pnl KQ-809-095/6E: 72-74 Lwr rear Q pnl KQ-809-097/8F: Upper wheel arch KQ-809-093/4G: Inner rear Q, lower KQ-801-203/4H: Qtr panel, lower front KQ-809-091/2

J1: 56-59 Frt fndr, lwr rear KQ-809-041/2J2: 60-74 Frt fndr, lwr rear KQ-809-043/4K: Outer rocker (skin) KQ-801-047/8

A

B C

D

E

EFG

HJ

K

REAR QUARTER PAnEL

47Fenders

56-74 Torsion inspection cover Clever plug fits hole in rear quarter. Only one position fits fender flank smoothly. See also KQ-801-203/4 for vital inner fender panel.

Outer torsion cover Correctly shaped metal.U-paint Need 2 per car. Sold each. . KQ-809-631Inner torsion cover Stinlss steel. Helps sandwich torsion cover to fender hole. Need 2. Sold each. . KQ-809-633Kit Outer and inner cover combined. Does one fender KQ-809-63KKit Used KU-809-63K

56-74 Quarter panel, lower front. Found between back of door opening/front of wheel arch. Includes outer hole for the torsion inspection cover. Starts just above seam at door (11 inches up). Extends 23 inches to wheel arch. Tapers with wheel arch to a bottom width of 20.5 inches. Correctly formed lips at door and lower seam/wheel arch. Molding clip holes indented, but not punched. Notched for jack port. With rear of Qtr panel, lower front rocker panel as inner piece (KQ-H01-203/4), cre-ates double-walled area

Rear Q- panel, lower front. With hole for torsion cover, LH.Rear Q-panel, lower front. With hole for torsion cover., RH

KQ-809-091KQ-809-092

Torsion hole cover

Upper wheel arch Formed lip for wheel opening. Metal width is 4 inches back from arch opening. Mated w/ lower front and lower rear q-panel repair sections to form complete wheel arch.

60-7160-7172-74

LH wheel arch Tapers to rear. German.RH wheel arch Tapers to rear. German.Universal (L or R) wheel arch True arc. USA.

KQ-809-093KQ-809-094KE-809-099

Lower rear of rear qtr panel. Found near t-lite on fender flank. Curves under bumper corner. Often rots at bottom. No bumper spacer. hole. Cov-ers (but not attached to) separate, vertical, reinforced bumper arm mount-ing panel. 10 X18 in. Curves (back edge) to center of t-lite opening.

Q-panel, lower rear. 56-6667-7167-7172-7472-74

NYA, Use KQ-809-096/6.LH Lwr rr q-pnl. No bumper dipple.RH Lwr rr q-pnl. No bumper dipple.LH Lwr rr q-pnl. Has bumper dipple.RH Lwr rr q-pnl. Has bumper dipple.

nYAKQ-809-095KQ-809-096KQ-809-097KQ-809-098

Wheel arch

Lower rearQ-panel

67-71

72-74Correctly dippled

for era’s largersquare bumper

Ghia Info: (Quarter panel, lower rear) The lower rear quarter panel (KQ-809-095/6), fits 60-66 Ghias after MAJOR changes. The lower rear quarter shape is different. A competent body man can make it work. (Then, a competent body man could make the panel from scratch.) "Making it work", requires darting the metal and reshaping the panel. So, we don't suggest trying to make the later panel into an earlier version. HOWEVER, two later panels can be used on 60-66 Ghias. The cars flank will look like a 67-71 Ghia. Only 1 in 10,000 will be able to spot the difference. THE BAD NEWS? Stock 60-66 rear bumpers will NOT fit. (But, the superb 67-71 repro blades and any similar era assembly-line bumpers will fit nicely.)

60-74 Taillite to rear apron When installing new metal along the bottom or “lower skirt” of the body, this piece fits from just below the center of the taillite inward to rear apron seam. Includes a 3 inch corner of the rear deck lid seal channel. U-must cut slot for rear bumper arm. Mates nicely with Qtr. panel lower rear pieces, and with the rear apron.

LH, t-lite to rear apron. (72-74 requires tad more work).RH, t-lite to rear apron. (72-74 requires tad more work).

KQ-809-071KQ-809-072

Taillite to rear apron


56-71 Rear bumper arm mounting plate “T’s” into battery, air cleaner plate. Allows rear bumper arms to bolt to body. This panel forms, along with the backside of q-panel lower rear pieces, the metal pocket or pouch seen when replacing t-lite bulbholder.

LH, rear bumper mounting panel.RH, rear bumper mounting panel.

KQ-809-171KQ-809-172

72-74 Add on plate Welds to KQ-813-095/6 so 72-up bmpr arms can be used.

LH, add on plate. For wide bumper arm used on sq. bmprs.RH, add on plate. For wide bumper arm used on sq. bmprs.

KQ-809-173KQ-809-174

Rear bmpr mount panel

Add on plate

FUEL FiLLER FLAPOpening or release parts

68-74 Fuel tank fender opening Rust repair panel. RH fender.”Dish” ac-cepts flap/filler tube. Includes 3 in. fender metal around opening

New, reproUsed

KE-800-410KU-800-410

Fuel flap lid Covers opening. Hinges out of the way. Cast metal.68

69-74USED U-paint. No catch (as is stock).USED U-paint. Built-in catch for cable ‘flipper’.

KU-805-905KU-805-905A

68-74 Fuel flap “bib” Rubber, protective flap under gas cap.Saves paint from ham-fisted gas pumper who blindly jams nozzle into filler pipe.

Gas flap bib Use w/donut shaped seal/flap. Stock for 68. Easy installing, econo version. KE-201-126Gas flap bib Replaces entire flap & donut ring. Stock 69-up. KQ-201-126A

Fuel flap spring 68

69-74USED Fine shape. Tension to hold lid down. USED Fine shape., Tension to spring lid open.

BU-809-930BU-809-931

69-74 Fuel flap release cable Trust me! It is possible for both housing ends to go thru small holes in body. Patience! Cables are rare. Hard to get.

OEMUsed

KA-809-939KU-809-939

68-74 Rubber stop Fuel flap. Pair. BQ-857-14P69-74 “D” ring shaped handle for release cable unit

OEMRepro

KA-823-461KQ-823-461

68-74 Bolt Holds fuel lid to opening in fender. Pr. BHX-05-10ZB69-74 Screw Holds "D" ring end of release cable to inner fender. Pr. SPP-05-10SB

Release tab

Cross-section of fuel flap lid

If either tab or “flipper” is broken, you must replace entire damaged unit.

Metal flap

Spring

“Flipper” cable operated

Rubberstop Release cable

W/armoredhousing

‘D’ shapedhandle

Fueltank

fenderopening

Fuel flap lid

Gas flap bib

Flapspring

Rubber stop

69-74 Screw Holds "flipper" end of release cable to opening in fndr. Pr. SPP-04-06SB

49Fenders

EnginE CoMPARTMEnT SHEETMETALRear apron, lock panels, etc.

Consumer Info: Many used sheetmetal pieces are available in de-cent, used condition; but you must know exactly what is wanted, describe it completely, and wait a few days for us to cut it off. Then expect expensive truck shipping charges on large chunks of sheet metal. Finally, be realistic! The youngest Ghia is nearly a quarter of a century old. Some parts have had 5 decades of 'life'. Used sheet-metal is not likely to be pristine; nor is it priced that way. Have a heart. At 90, will you be glamorous and unblemished? Call those lines and brown spots, character marks.

Rear lock panel Rear apron

Bumper armmounting plate

Main engine seal

Battery tray panel

Reinforcementrear apron

56-66 Rear lock panel, (engine compartment rear cover plate). This hori-zontal panel is not seen until the engine compartment lid is raised. At its center is bolted the rear deck lid lock. Each edge is cut diagonally to mate with L and R engine floors. KU-813-181A

67-74 Rear lock panel No seal. W/seal channel. USED.Rear lock panel No seal. W/seal channel. Repro.

KU-813-181CKQ-813-183

69-74 Rubber valve Circular. Quarter-sized drain valves on rear panel. Need 4. Four pak. BA-801-17K

56-74 Rear apron Visable from outside below rear lid. Fits between visable seams. Includes trough for rear deck lid seal, but none of rear lock panel itself. Follows 72-74 style with mild indents for dual exhausts. (Earlier Ghias were flat along bottom lip.) No holes for base of rear bumperette tubular brace. Hole/brace used 58-71 USA market KG’s. KQ-813-301

Engine "floor" sheetmetal (rear lock panel, battery tray and air cleaner platform) are of two basic styles and a seemingly endless series of variations. For example: battery mounting hardware changed totally at least 4 times between 66 and 72, and changed again before 74. It is unlikely replacement sheetmetal will exactly duplicate what you've got. The first style of floor, up thru 66, uses a smaller engine opening. From 67-on, the later large opening was used. So, there can be no mixing and matching between basic styles. One final problem. The first part of the entire rear end of a Ghia "laid down" by Kar-mann on the assemblyline were these 3 engine "floor" pieces. There may be no way to remove these 3 pieces (especially the side pieces) without, Humpty-Dumpty style, the whole rear end falling apart. In other words: the patient badly needs a major structural transplant (like a heart replacement); and you're complaining some mild scars will show, compromising the ability to wear a bikini. Wrong set of priorities!

Rear lock panelrear apron

(As seen from engine)

Rear Apronw/exhaust cutouts

(As seen fromrear of Ghia)

LH, driver’s side engine floor. Function varies. .56-65 LH floor No major function. Air clnr points here. USED KU-813-161

66 LH floor Battery floor. Small opening. Make-do with earlier metal. USED. KU-813-163

67-74 LH floor Battery floor. Batt size intended for VW-sized 12V batt. Adapt batt hold-down or use a generic one. Repro Used, sometimes available

KD-813-165KU-813-165

RH, pass. side engine floor. Function varies. .56-6567-74

RH floor Battery floor. (6V). USEDRH floor Fm 66-up holds air cleaner stand. (U-provide).

KU-813-162KU-813-166

Weatherstrip, engine floor. Stays when engine is removed.56-7456-7456-6656-6667-7467-74

Firewall seal Decent repro.Firewall seal German. Excellent.Rear (or main) engine seal Decent repro. Rear (or main) engine seal German. OEM. Excellent.Rear (or main) engine seal Decent repro.Rear (or main) engine seal German. OEM. Excellent.

BE-813-741EBQ-813-741gBE-813-705ABA-813-705A

Bw-813-705DBA-813-705D

Check availability. These parts are scarce used, and new repros may not be available.


For the 10,000th time! A Beetle pan and a Ghia pan do not interchange. No way! Nyet! Nope!

56-74 “C-shaped” metal channel Holds engine seals. U-cut/weld. nYA66-67 Air cleaner stand (Base or bracket) (USED). Bolt-on. KU-129-645A68-74 Air cleaner stand (Base or bracket) (USED).Spot welded to deck. YU-813-503A56-74 Kit, engine compartment insulation. (Sound absorber). Covers “fire-

wall” (1); Wheelhouse (2); Inner qtr panel (2).Engine cmprtmnt insulation OEM-style tarboard. Repro. Mount as original, or use big headed screw/washers. KQ-813-805KEngine compartment insulation Pebble grained, plastic faced, foam core. Nice, but not stock looking. KE-813-805K

60-74 Inner wheel housings USED. The wheel shaped metal in which the tire resides. Spans between inner and outer fender panel. Difficult to remove. Requires trimming. Inquire! Be very specific about your needs. May not always be available.

Outer half of wheelhouse To center of wheel opening.LH outer half USED. Inquire.RH outer half USED. Inquire.

KQ-813-075 KQ-813-076

Engine compartmentinsulation 5 pieces

Firewall

Wheelhouse

Inner q-panel

Inner halfLH W/hs

Sheet metal

Outer halfLH w/hs

Lots of inner, rear quarter panel sheetmetal may be available. Ask! Parts like the inner half of the rear wheelhousings; the rear seat lug-gage compartment floor plate; the air cleaner stand; etc. can be salvaged from one of our parts Ghias. Be specific. Expect more metal than you want. Remember, a Ghia is a unibody car, not a jig-saw puzzle. You may never be able to remove, or add, all body pieces without your surgery showing. Some panels, after replacement, will, of necessity, show scars.

Frame/Floor Pan Section

Front axle framehead Installation requires precision welding.56-6556-6566-7466-74

Framehead Bolts up king-pin front axles perfectly. Used.Framehead Bolts up king-pin front axles perfectly. New.Framehead Bolts up king-pin front axles perfectly. Used.Framehead Bolts up king-pin front axles perfectly. New.

BU-701-037BQ-g07-037BU-701-038BQ-707-038

56-74 Floor insulation pad kit (sound deadening mats) Ghia size and shape. Not a make-do-Beetle kit. Resists Floor insulation pads absorbtion of water. Glue on. Four piece kit, NLA. KQ-863-70K

RH, or passenger floor pan half

LH, or drivers floor pan half

Base plate framehead, as seen from rear

Typical, usedframehead

as seen from front

Note: Used piece con-tains part of ‘firewall’. Not so of new pieces.

51Frame/Floor Pan Section

FLooR PAnS• Full-quarters • Short rears • Lipped full pan halves

Only fronts plus long rears ='s a full pan half

Long rear

Short rear

Long rear: 35 inchesShort rear: 27 inches

Got rotten, rusty floor pans on your Ghia? Read about the various pan sections available. Then, look closely at your pan troubles. Why buy more expensive metal than needed.”How can I tell if I need lipped pan sections?” you ask. The answer? A Solomon like response that seemingly evades the question:“Dad, how do I know if I’m still a virgin?” “Son, if you have to ask, you still are!” Doubt not! If you NEED lipped pans you know it. Can you reach in, thru the outer rocker, and grab the floor mats? You need lipped floor pans. But, is rot limited to rusty floors? You shouldn’t need lips.

These stamped, weld-in, metal panels are precision pieces with stiffening ribs and stamped pockets, as original. Panels use sturdy, heavy guage sheet metal, as original; not the fender thickness “tinfoil” found on some Beetle repro pans. These pans can provide as sturdy and long lasting a floor as any original pan. But, they do require cutting, welding precision measurement, talent; plus tools and patience. Satisfactory results will not be achieved by a"craftsman" whose only mechanical experience has been in changing light bulbs; and whose whose most expensive tool is a pop-rivet gun.

Save the following from your rusty pan. 1) seat track runners; 2) “L” shaped brake pedal stop 3) gas pedal hinge, spot welded to floor; 4) rubber mat “thimbles” 5) “covered bridge” support between front seat track runners; 6) seat belt mounting nuts; 7) insulation pads.

56-7456-74

FRONT, LH floor pan. 29.5L X 23 W (base) X 9W (at top)FRONT, RH floor pan. 29.5L X 23 W (base) X 9W (at top)

KQ-701-101KQ-701-102

56-74 REAR, LH extra long. 35L X 23 W (seat) X 19 W (at back) KQ-701-11556-74 REAR, RH extra long. 35L X 23 W (seat) X 19 W (at back) KQ-701-11656-74 REAR, LH short insert. 27L X 23 W (seat) X 19 W (at back) KQ-701-12756-74 REAR, RH short insert. 27L X 23 W (seat) X 19 W (at back) KQ-701-128

56-74 Pan halves The full floor pan on each side. U-save seat track runners. Lipped. With 72-74 heater cable channel.

Full pan halves LH. Danish repro. 19ga. KQ-701-059Full pan halves LH. Danish repro. 19ga. KQ-701-060

Close upLipped pan edge

Lippedfloor pan

Front


A 56-74 56-74 Shock pad, to front beam. Pr. BQ-899-123

B 56-74 56-74 Grommet, gas line thru chassis.Pr. BQ-209-189

C 56-74 56-74 Reinforcment plate (washer) . USED. Need 24. YU-899-13K

D 56-74 Shift rod bushing W/snap ring Bw-701-259E 56-74 56-74 Shock pad, body to

chassis.. Bw-899-11KF1 56-64 56-64 Shift rod coupler W/

screw. Bw-711-175F2 65-74 65-74 Shift rod coupler

Complete. Yw-711-211G 58-74 58-74 Boot/cable guide

Clutch/gas tube to frame. Bw-821-293H 56-74 56-74 Boot Clutch tube at trans. Yw-721-363I 60-74 60-74 Rubber stop Spring

plate. Rear suspension. Yw-501-191

J 56-74 56-74 Grommets Brake line to pan. 3 needed. 4 pak. Uw-611-751

K 61-74 Collar Seat belt mounting. 4 pcs. YE-857-78KL 56-74 Pan gasket Body to frame seal

German Quality repro

BA-701-605BQ-701-605

M 58-74 Bracket for gas pedal On floor plate BA-701-535

N 56-74 Bracket/clip for brake hose 4 pak. Bw-611-71K

O Boot Switch, master cylinder.56-66 Mstr cylndr switch boot Bw-963-33567-74 Mstr cylndr switch boot

2 pc. kit. Fw-941-53PP 56-74 Gasket Framehead cover BE-707-571

A

B

B

C

C

D

E

F1 F2

G

H

I

J

K

L

M

NO

P

Top oftorsiontubes

53Bumpers

BumpersBlades, Brackets, Seals, Etc.

Front bumperBackside

USA market

Rear bumperBackside

USA market

Notice and Warning: Good used bumper pieces are, SOMETIMES, available. Occasionally, these pieces are something you would want on your own car. Ask! But, don't expect miracles. And, remember, the cost of the part is in DIRECT proportion to its quality. If you manage to buy a $25 complete front bumper from us, don't expect chrome to rival the brillance of the Sun, and DO expect surface smoothness matching the Craters of the Moon. Once we had over 2400 bumper pieces. Techni-cally, if evenly matched by position on the bumper, we had the makings of 300 bumpers. (2400 pieces divided by 8 major, chrome items per bumper.) Murphy's Law got us! If you needed left hand, say, bumper corners; all we had were right hand pieces. Want a center front bumper blade? We have 2 dozen, virtually perfect pieces, to which 2 dozen pygmy-brained former owners have drilled huge holes in order to screw down the front license plate. The rear center blade must have an "Abuse me" label etched on it. What else explains the number of welded, screwed, holed and hammered attachments found on these blades. Want to take your cello on vacation? We've got bumpers with a built in cello rack. Do you transport your 500 pound mother-in-law in a wheeled Lion's Cage. Well, we've got the bumper hitch for you. So, just because you want it/need it doesn't mean good, used, reasonably priced bumper pieces are available instantly. Still, couldn't hurt to ask! Of course, Murphy's law rightly will tell you, moments after flatly telling a customer, "Fresh dinosaur steaks would be easier to find!", an entire herd of bumper ends will make an appearance in our yard.

BUMPER BLADESEarly (56-71) are 3 piece. Late (72-74) one.

56-71 Front bumper blade 3 piece. Front center, right, left. Chrome. New. Euro market. Without hole in tube. Quality European repro. KQ-707-10K

56-71 Rear bumper blades 3 pieces. Rear center,right,left. Chrome.Quality European Repro. Fits all. intended for 67-71. KQ-707-30K

Euro market bumpers: Use no tubes. So blades have no holes for mount-ing bolts. "Bumperettes" are small, petite and have no hole in the head.. USA market bumpers: Have overrider tubes. Need a hole in the blade to mount the tubes. "Bumperettes" have a "hole in the head" for tubes.

Special metal spacer bracket


So-called“square”bumper

72-74

72-74 Used front bumper blade Square, 1 piece. No bumperettes/rubber. KU-707-103

72-74 Used rear bumper blade Square, 1 piece. No bumperettes/rubber.. KU-707-303

Look closely at the two diagrams of a right hand rear bumper corner. Assume the brace for mounting the tip of the bumper to the flank of the car is at exactly the same spot on both bumpers. Why one bumper cor-ner is LONGER than the other? True. The reason? All Ghia bumpers were designed to stop at the beginning of the wheel opening. From 56- 66, the Ghia wheel opening resembled a half circle. From 67 thru 71, the design-ers tapered the back edge of the wheel opening in an effort to make the car look as if it were in motion when still. This meant the bumper corner had to be ever so slightly shorter on the late cars. Quick Test in the field. If two fingers fit between the bracket and the tip of the chrome, you've got an early corner. If no fingers fit between the tip and the end, it's a late cor-ner. The practical result? All late corners (and present repros) fit all years.

An early corner on a late car will stick the bumper visably into the wheel opening. Late and early corners do not visually mix and match. So, be careful when assembling a bumper from a pile of used parts. Apply the Quick Test to all rear corners.

BUMPERETTESAlso called overriders, bumper guards, vertical bumpers

56-71 Euro Bumper Guards Steel. Brilliant chrome. Well done!German repro Exquisite. Truly nice

Front Left/Rear Right Front Right/Rear Left

KQ-707-155KQ-707-156

Repro Very good. Only a few percentage points separate these from the German example.

Front Left/Rear RightFront Right/Rear Left

KD-707-155KD-707-156

56-71 USA Market bumperettes USED. Each. Hole in head.Left front Stamped VL. Rechromable.Right front Stamped VR. Rechromable.Left rear Stamped HL. Rechromable.Right rear Stamped HR. Rechromable.

KU-707-155F KU-707-156FKU-707-355DKU-707-356D

72-74 Bumperettes, For late square bumper. No notch bumperettes Bumpers without horizional rubber strip along faceLeft Front/Right RearRight Front/Left Rear

KU-707-153KU-707-154

Notched bumperettes Used with rubber protective strip on bumper face.Left Front/Right RearRight Front/Left Rear

KU-707-153BKU-707-154B

56-66

67-71Twofingers

Nofingers

Euro bumperette56-71

USA58-71

Holein

head

Rubberstrip

72-74

No notch Notched

55Bumpers

56-71 Front bumper arm Excellent repro. Blackpowder coated. Correctly designed.They “fall in place”. L or R. H of G. KQ-707-135

56-71 Front bumper arm Decent repro. Pulled by mounting bolt into place. UnPainted. L or R KE-707-135

56-71 Rear bumper arm LH Excellent repro bumper arm Blk pwdr coat. H of G.RH Excelllent repro bumper arm Blk pwdr coat. H of GLH Decent repro bumper arm UnPainted.RH Decent repro bumper arm UnPainted.

KQ-707-335AKQ-707-336AKE-707-335AKE-707-336A

72-7472-74

Front bmpr arm Sq.bmpr. Fine repro. UnPainted.Rear bmpr arm Sq. bmpr. Again fine. UnPainted.

KQ-707-135BKQ-707-335B

56-71 Arms

72-74 Arms

W/deco covermounting slots

BUMPER ARMDecorative covers (Deco), support tubes, etc.

56-71 Front only USA deco covers Have hole for overrider support.LeftRight

Front only Euro deco covers No Hole for overrider supportLeftRight

KQ-707-137BKQ-707-138B

KQ-707-137EKQ-707-138E

Rear only Euro/USA deco covers LeftRight

KQ-707-337KQ-707-338

Front overrider support tubes, USED, USA only.LeftRight

KU-707-233KU-707-234

Rear overrider support tubes, USED, USA only.LeftRight

KU-707-391KU-707-392

56-71 Special metal spacer bracket Holds bumperette to blade. Need two per bumper. Used on all (Euro & USA).

Spacer Repro. sold each.Spacer USED. A good buy, sold each.

KQ-707-121KU-707-121

Front

Decorativebumper arm

cover andsupport

tube

Rear

BUMPER TUBESOverrider tubes (bows) USA market. Used.

58-71 Front center KU-707-17758-71 Front left KU-707-17958-71 Front right KU-707-180

58-7158-6958-6970-7170-71

Rear centerRear leftRear rightRear leftRear right

KU-707-383KU-707-385KU-707-386

KU-707-385AKU-707-386A


Overrider tubes and “tall” bumperettes first appeared on Ch # 1-764-743 and later USA market Karmann Ghias.

SEALS & SPACERS

Decorative cover to body seal

Bumperetteto face ofblade seal

Front bumper tip spacerAll models

need 2

Rear bumper tip spacerAll models

need 2

1956-71

Bumperette to bladeAll models

need 8

Support tube thru deco coverUSA models

need 2

Deco cover to bodyAll models

need 4

Tube to bladeUSA modelneed 4 total

2 frnt/2 rr

Bumper arm thru body slotAll models

need 4

Bumperetteedge tobladeseal

58-71 USA bumper seal kit Includes : 2 frnt bmpr tip to fndr spacers; 8 bmprette to bld face; 2 support tube thru frnt deco cvr; 4 deco cvr to bod; 4frt & rear (2 ea) overrider tbe to bld; 2 rear bmpr to fndr flank spacer; 4 bmpr arm thru body slot. KQ-798-U8K

56-71 Euro bumper seal kit Includes: 2 frnt bmpr tip to fndr spacers; 8 bmprette to bld face; 4 deco cover to bod; 2 rear bmpr to fndr flank spacer; 4bmpr arm thru body slot. KQ-798-E9K

56-74 Bumperette to blade seals (Bumper guard) One on each side of guard. 8 pak. Clever design allows “fat” side of seal to show (56-66); or slender side (67-71). Quality. H of G. Not a make-do Rabbit seal (as is current VW parts counter item). KQ-707-24K

56-71 Deco cover to body seals On body edge of metal cover. 4 pak. Leaving seal out? There’s an ugly gap between cover & body. KQ-707-25K

58-71 Circular seal Support tube thru deco cover. USA. Pair. BQ-707-99POverrider tube to blade seal Chrome tube as it touches the blade, seal. USA only.

58-71 58-6970-71

Front tubes to blade 2 pak.Rear tubes to blade 2 pk. Rear only.Rear tubes to blade 2 pk. Short rear tube.

KQ-707-18PKQ-707-38PKQ-707-18P

56-71 Rubber spacer, front bumper tip. Spaces end of front bumper away from front fender flank. L&R. 2 per car. KQ-707-25P

56-71 Rubber spacer, rear bumper tip. Grommet. Spaces rear bumper end away from body near wheelopening. Pr. KQ-707-35PBumper arm thru body slot seal Oval. Front seal is vital in keep-ing drafts out of luggage compartment. 4 pak.

56-7172-74

Arm thru slot seal 4, same-sized short oval. 72-74 Arm thru slot seal 2+2,mid/long-sized oval.

BQ-707-97KBQ-707-98K

73-74 Bumper “arm” cover Molded plastic. Also covers massive ‘shock absorber’ tube as it nears the body. EACH. KQ-707-39P

Supporttubeseal

Tube tobladeseal

Rubberspacer

rear bmpr

Bumperarm slot

seal

57Bumpers

Numeral followed by: FO=’s FRONT ONLY. F/R=’s FRONT and REAR. RO=’s REAR ONLY.

Bumper seals: Every bumper seal can be purchased in an economy version. Ask! Sometimes 4 or more different quality levels exist, as with bumper arm seals. Our kits only contain the best seals we could find.

56-71 BUMPER MoUnTing BoLTSStainless steel. 56-71 tubed bumper.

1-FO

2-F/R

2-F/R

2-F/R

2-F/R

3-F/R

3-F/R

4-F/R

4-F/R

5-FO

6-F/R

6-F/R

7-F/R

8-RO

9-F/R

10-RO

11-F/R

1-FO BOLT. THRU FENDER AND FLANK TO TIP OF BUMPER 2 per car. BHX-08-60SB

2-F/R BOLT. HOLDS OVERRIDER TUBE TO FACE OF BLADE. 4 per blade.

58-67.5 (Ch # 147-529-061)67.5-71

BHX-10-20SBBHX-08-20SB

3-F/R CARRIAGE BOLT BRIGHT, MUSH-ROOM- HEADED. 4 per blade. BE-707-19P

4-F/R BOLT. THRU FRONT OR REAR OVER-RIDER TUBE SUPPORT INTO BACK OF BUMPERETTE. (Not all bumperettes, especially cast alum., use this bolt.) 2 per bmpr. 4 per car. BHX-08-55SB

5-FO BOLT. SUPPORT TUBE TO BMPR ARM. 2 per car. BHX-08-25SB

6-F/R BOLT. BMPR ARM TO WELDED BRACKETS ON BODY. 2 per arm. 4 per bmpr. 8 per car. BHX-08-25SB

7-F/R BOLT. THRU HOLE IN BMPR, THRU SPACER, INTO BOTTOM OF BUMPER-ETTE. (Not all bumperettes, especially cast alum., use bolt) 2 per bmpr. 4 per car. BHX-08-70SB

8-RO BOLT. THRU REAR FENDER FLANK INTO TIP OF REAR BMPR. GOES THRU REAR BUMPER GROMMET. 2 per car. BHX-08-40SB

9-F/R SCREW. PHILLIPS-HEAD. HOLDS DECO COVER TO BUMPER ARM. 2 per bmpr. 4 per car. SPP-05-16SB

10-RO BOLT. THRU BASE OF REAR OVER-RIDDER SUPPORT TUBE TO REAR APRON. 2 per car. BHX-06-16SB

11-F/R BOLT. THRU BMPR ARM INTO BRACKET ON BACK OF BLADE. 2 front. 4 rear. BHX-08-20SB


72-74 BUMPER MoUnTing BoLTS72-74 “Square” bumpers

3-F/R CARRIAGE BOLT. MUSHROOMHEAD. Bright metal. Need 6. BE-707-19P

6-F/R BOLT. BMPR ARM TO WELDED BRACKETS ON BODY. 3 per arm, 6 per bumper, 12 per car. BHX-08-25SB

Ghia Tip: Using too long of a mounting bolt on your 56-71 bumper often puts a chrome "pimple" on the face of the blade or the bum-perette. Use care! Don't tighten bolts completely to the last ounce of your strength! Use washers between bolt head and the bumper. Disassembling bumpers? Got lots of broken rusty bolts? Agony! Use stainless bolts and grease threads before assembly.

Ghia Info: Ghias and Beetles came from Germany without license plate mounting hardware. VW had long known it could not antici-pate the shape, location or size of license plates dictated by gov-ernments. So, the Mother Firm left it to the national sales organi-zation (For the USA, VW of America) to come up with hardware. VW of A hung the plate from the center of the front overrider tube with clamps. The only non-metric bolt on your car is likely to be the cheap, quickly rusted bolt coming with the dealer installed clamp.

56-71 Euro bumper bolt kit . All bolts for assemblyEuro bumper blade/arm bolt kit. For bmprs wo tubes.

Euro bolt kit, stainless steel. Top quality, super strong, never-rust materials. Contains following bolts: 8 bumper arm to body. (4 frnt/4 rr); 6 bumper arm to bracket on backside of blade, and 2 long bolts going thru front arms into back of bmerette; 2 bumper tip to front fender; 2 bumper tip to rear fender; 4 screws holding “deco” cover to arm; 8 bright-headed (not stainless) metric carriage bolts w/nuts. KQ-797-S1K

56-71 USA tubed bumper blade/arm bolt kit For bumpers with tubes and “hole in the head” bumperettes.

USA bolt kit, stainless steel. In addition to the above Euro kits, contains the following bolts: 4 bolts holding overrider tube to blade face; 4 bolts thru head of painted support tube into back of “hole in the head” bumperette; 2 bolts holding painted support tube to front bumper arm; 2 smaller bolts hold base of rear support tube to rear apron. KQ-797-S3K

LiCEnSE PLATE MoUnTing HARDwARE

58-71 Front license plate clamps Quality hardware included.Stainless steel clamps Chrome-like brilliance, and will stay that way. Pair of clamps with rubber. KQ-797-S7KGalvanized steel clamps Zinc-plated, as OE. Pair. KE-797-Z8K

72-74 Front license plate brace Sq. bumper. Center mount. Drill holes. KE-797-Z09ALL Rear license plate mounting bracket Again, left up to each

dealer. This was VW of A’s usual solution. Drill new holes? OUCH! KE-797-Z09

59Electrical Section

wiRE LooMSAll wires exact color-coded reproductions of factory looms. Completely assembled. No terminals to crimp on. Nothing to assemble. Includes easy to follow instructions/diagrams. Not a 5 minute job! But, it is easier than you think. Fits USA export market Ghias. Uses highest quality materials. LH drive only.

Electrical SectionNote: Wire harness of the 56-65 era goes thru a tube welded into the rocker

Don't remove harness without first pulling a guide rope out with it

Pipe in rocker has a hole almost the diameter of wire bundle Lots of rust? Rust shrinks tube's diameter, making for an impossibly tight fit

Typical 56-65main wire loom

Wire bundle goes thru tube welded into RH rocker.

A Ghia's hidden heart is its wire harness. Is your Ghia hard to start? Taillites dim, but electrical parts check out? Plastic wire insulation baked by heat? Wires "naked" from previous body work? Corrosion eating away the brass terminals? Your Ghia's electrical system has hardening of the arteries! Maybe complete cleaning of ALL connections can solve your electrical woes. But, for a permanent fix, here's the solution.

56-59 Main wire loom KQ-971-569M60 Main wire loom inquire

61-65 Main wire loom KQ-971-615M66 Main wire loom KQ-971-066M67 Main wire loom KQ-971-067M

68-69 Main wire loom KQ-971-689M70-71 Main wire loom KQ-971-701M72-73 Main wire loom KQ-971-723M

74 Main wire loom inquire

Front wire loomNot sold separately

Main wire loom

Complete wire loomconsists of both

Front and main looms

Typical 66-74complete wire

harness

T-lites

T-lites

Lic. lite

Regulator

Engine

Coil

GenStarter

(not main power feed)

Interior lite(in windshield frame)

Wire bundle along LH inner rocker

Door jamb switch LH

Wires to back side of fuse block

Wires to front side of fuse block

Brake

H-lite

Horn

H-lite

P-lite

P-lite

Door jambswitch RH


Complete wire loom kit Contains main wire loom (page 59) plus all instrument, headlite, parklite and front body wires. Includes connectors, plugs,instructions.

56-59 Cmplt wire loom KQ-971-569C60 Cmplt wire loom inquire

61-65 Cmplt wire loom KQ-971-615C66 Cmplt wire loom KQ-971-066C67 Cmplt wire loom KQ-971-067C

68-69 Cmplt wire loom KQ-971-689C70-71 Cmplt wire loom KQ-971-701C72-73 Cmplt wire loom KQ-971-723C

74 Cmplt wire loom inquire

BATTERY CABLE / gRoUnD STRAPFunctional not museum authentic.

56-74 Ground strap, battery. Mesh. Find a convenient ground on engine. KQ-971-23556-74 Ground strap, transaxle to chassis. BQ-971-23756-74 Battery to starter, main feed (battery cable, positive). 38” long. FQ-971-22856-74 Grommet, starter wiring. Bw-997-907

BULBS / BULB KiTSNote: Euro market cars in 67 were often 6 volt. Inquire.

Instrument bulb socket Accepts bulb, plugs in back of instrument.56-6667-74

Bulb socket Looks like topless tin can w/spade connector.Bulb socket Plastic. Used on instruments and switches.

BA-957-397KA-957-397

6 volt

56-66 Seal beam units Entire bulb. USA market only.Seal beam bulb Standard 6 volt. EQ-941-006Seal beam bulb Halogen 6 volt. (Need top-notch electricals to run these. Whimpy generator out-put, feeble light).

56-66 Parklite bulbs (front turn signal). Need 2 per. w/spare bulb. 6 volt.Parklite bulbs USA market. Two filament/contact bulb.Parklite bulbs Euro market. One filament/contact bulb.

EQ-737-154EQ-731-129

56-6658-5960-6656-6658-6465-6656-66

66

Taillite bulbs Small. Lowest bulb in b-hlder. Need 2. 6V.Stop/rear turn signal bulb Top of b-hldr. One cntct. Need 2. 6V.Stop/rear turn signal bulb Center/top b-hldr. One cntct. Need 4. 6V.License lite Need 2. 6V.Dome lite (interior lite) Double ended. 6V. 10W.Dome lite (interior lite) Flash-bulb style. 6V. 4W.Instrument bulbs Speedo/clock/fuel guage. 6v. Need 7.Emer knob bulb. Wheat-grained. 6V. Bulb JG, 1.2 W. 2 pak/need 1.

EQ-718-081EQ-731-129EQ-731-129EQ-718-081EQ-723-450EQ-717-063EQ-722-799EQ-751-721

12 volt

All 12v Seal beam units Entire bulb. USA market only. EQ-941-012Seal beam bulb Standard 12 volt. (6014 if used pairs.) EQ-941-H12Seal beam bulb Halogen 12 volt. Simple replacement. EQ-989-H12Conversion unit To Euro style halogen bulbs. Curved lens face. (No flat face, like common conversion unit.) EQ-738-157

58-74 Parklite bulbs (front turn signal). 12 volt. USA market only. Need 2. 1034 EQ-717-05770-7467-74

Side marker bulb Small, on side of USA b-hlders. Need 2. 12V. 4W.Licence lite bulbs Need 2. 12V EQ-718-067

67-6967-69

67-470-7467-74

6768-7467-74

Taillite bulbs Small. Lowest bulb in b-hlder. Need 2. 12V.Stop lite bulbs Middle of b-hldr. Need 2. 12V. 1073.Rear blinker lite (Rear T-signal). Top of b-hldr. Need 2. 12V. 1073. Stop/taillite Middle of b-hldr. Need 2. 12V. 1034Back-up lite Either separate unit or bottom of T-lite b-hldr. Need 2. 1073.Dome lite (interior lite). Flash bulb style. 12V. 4WDome lite (interior lite) Double ended style. 12V. 5W.Instrument bulbs, plus knob lites, dash warning lites. Need up to 10.

EQ-718-067EQ-732-156EQ-732-156EQ-738-157EQ-732-156EQ-717-057EQ-725-418EQ-751-721

Ground strap

Early bulb socket“metal tin can”

Late bulb socketPlastic/wheat-grain bulbs

Typical of: Stop/tail lite

Single contact(single filament)

Bulb base viewsingle contact

Typical of: Front T-sngl

Double contact(double filament)Bulb base view

Typicalstop/lic. bulbs

Typicalinstrument

Wheat grainedinstrument

Domelite


The rapidly evolving Ghia/Bug turn signal systemUSA

3 spade connectors

AL MARKETS6 spade connectors

Typical 66-67T-signal switch

Typical 60-65T-signal switch56-57 Self-canceling

T-signal switch(thru Ch # 1-649-252)

58-59

TURn SignAL SwiTCHAt steering column: Early switches are rare indeed!

SWF is the original German manufacturer of turn signal switches.

60 T-signal switch Ivory. used. Rare!. OEM part number BA-953-511 even more rare. BU-953-511

61-65 T-signal switch Silver beige. Euro. W/quick flash. SWF. Works on USA cars. 6 spade connectors, as original. NEW USED

KA-953-517BKU-953-517B

61-65 T-signal switch Silver beige. USA market. WO/quick flash. SWF. Won’t work on Euro cars. 3 spade connectors, as original. NEW USED

KA-953-517CKU-953-517C

Typical72-74T-signal switch

Typical 68-71

T-signal switch

Splice wires

Clever white plasticsnap-in wire ‘holster’

66-67 T-signal switch Black. All markets. SWF. Adapts to 61-65, but black.OEM NEW, ReproUSED

KA-953-517FKQ-953-517FKU-953-517F

68-70 T-signal switch Black. All markets. (So, maybe extra wires.) SWF. Splice to existing wires, as original. No large brass/copper tab on face.

OEMNEW, Repro USED

YA-953-513BYQ-953-513BYU-953-513B

71 T-signal switch Black. All markets. (So, maybe extra wires.) SWF Splice to existing wires, as original. Has large brass/copper tab on face.

OEMNEW, Repro USED

BA-953-513CBQ-953-513CBU-953-513C

72-74 T-signal switch Black. All markets. SWF.OEMNEW, ReproUSED

nYABQ-953-513FBU-953-513F

56-57 T-signal switch Self-canceling switch. for up to Ch# 1-649-252 USED BU-953-513B

58-59 T-signal switch 2 piece colar switch.With tapered switch handle USED BU-953-513C


T-sig/E-flash OEM. (Each manufacturer’s relay looks different.)66 T-sig/E-flasher USED. 6V. Significant life span is suspect. BU-953-225

67-68 5 T-sig/E-flasher USED. 12V. The only man who could trouble-shoot these lived in Germany, and he died! UU-953-227

T-sig/E-flash REPRO electronic. Fine, long-lasting relay. Doesn’t look anything like a museum stock relay

6667-68 5

T-sig/E-flasher Repro/electronic. 9 terminal.T-sig/E-flasher 12V. Repro/electronic. 9 terminal.

BQ-953-225UQ-953-227

MiSCELLAnEoUS RELAYS

FUSEBoX AnD PARTS

Relay, headlite flasher. Low beam and quick flash.66 H-lite relay, 6V. USED. Rectangular “can”. (No floor switch.)

NEW USED

YQ-941-581YU-941-581

67-70 H-lite relay, 12V. New. Current replacement style. Sugar cube style. Works super! Doesn’t look era. BQ-941-583

67-70 H-lite relay, 12V. USED. Era authentic. Rectangular “can.” YU-941-58371-74 H-lite relay, 12V. New. Similar to era sugar cube style. BQ-941-583B

Relay, dual horn.56-66 Dual horn relay, 6V. A workable solution rather than a visual

duplicate of assembly line. Check availability. KQ-951-25167-74 Dual horn relay, 12V. Sugar cube style. Not era look. KQ-951-25367-74 Relay, heated rear window, 12V.Sugar cube, as authentic. KQ-906-061

56-7456-7456-6056-6061-6661-6667-7167-7167-71

Fuse, ceramic. Original style. 8 Amp. White. 10 pak.Fuse, ceramic. Original style. 16 Amp. Red. 10 pak.Fusebox, two fuses. With cover. See fuses above.Fusebox, four fuses. With cover. See fuses above.Fusebox eight fuses. With cover and clip. See fuses above.Cover For fusebox, eight fuse. Current VW replacement.Fusebox Ten fuses. With cover and clip. See fuses above.Cover For fusebox, ten fuse. Current VW replacement.Clip Holds fuse box cover.

EQ-9X8-211EQ-916-214BQ-937-041BQ-937-205BQ-937-505BA-937-555BA-937-507BA-937-577BA-937-591

Three relay

shapes

Ceramicfuses

Fuse boxtwo fuses

Fuse box four fuses

Coverfour

fuses

Clip, holds fuse box cover

From 66 thru 68.5 (Ch #148-381-366), VW used a troublesome, hard to diagnose, complex "thermal wire", 9 terminal relay working as BOTH the turn signal and the newly required emergency lite flasher. It was not one of VW's better ideas. If any one of the 9 circuits failed, all were messed up, sometimes mys-teriously so. The relay was used only for 2.5 years, was expensive then and, today new, can be ruinous to your bank balance. Enter Yankee ingenuity. A true electronic, simple, cheap, far more reliable solution; a relay with some nice touches. A failure of the T-sig relay won't mean throwing away the entire unit. Components can be replaced. But, these easy installing relays don't LOOK like the era black box. So, find a working, used, original, install it for shows, and let it ride in the glove box the rest of the year. (In other words, why wear out an impossible to find original relay. Use the great repros.)

CoMBinATion T-Sig / EMER FLASHERThe infamous 9 terminal "black box"

Always 3 above

“Sugarcube”style

USAcan

style

Either 2 or 3 above$ is an indicator of

quality


7272

73-7473-74

Fusebox, 12 fuse. Wo/relay bases built in.Cover, fusebox, 12 fuse. Current VW replacement.Fusebox, relays and 12 fuse. Complex.Cover, fusebox, relay / 12 fuse.

BQ-937-508Bw-937-588BA-937-509BA-937-599

HEADLiTE SwiTCHEscutcheon The switch to dash ‘nut’. Round aluminum face. Threaded body. Face slotted for special removal tool. Often marred removing switch.

58-6767

68-74

M 10 X 1 10 mm. All head-lite, wiper switch. 66 only E-switch.M 12X1 12 mm. Emergency lite switch.M 14X1 14 mm. All headlite, Emer-lite. Wiper thru 71.

BA-941-510BA-941-512BA-941-514

Switch, headlite. All switches work either 6 or 12 volt.56-57 Headlite switch (Thru Ch # 1-649-253). OEM. Rare. Has dash

bracket for choke, etc. Bared wire/set screw connectors. Carries its own escutcheon, and elaborate mounting brace. KU-941-531

58-6758-6768-7068-7071-74

Headlite switch . Good quality. 10 mm escutcheon.Headlite switch USED. 10 mm escutcheon.Headlite switch German. 14mm escutcheon. The best..Headlite switch USED. 14 mm.Headlite switch OEM. Fine quality. 14 mm.

KQ-941-531AKU-941-531AYA-941-531AYU-941-531BBA-941-531E

EMERgEnCY BLinKER LiTE SwiTCHEscutcheon separate.

6667

68-68 568 5-7468 5-74

Emergency lite switch USED. 6V. 10 mm escutcheon.Emergency lite switch USED. 12V. 12 mm escutcheon.Emergency lite switch USED. 12V. 14 mm escutcheon.Emergency lite switch NEW. 12V. 14 mm escutcheon.Emergency lite switch USED. 12V. 14 mm escutcheon.

BU-953-231BU-953-232BU-953-233UQ-953-235UU-953-235

6V Cigarette lighter Entire unit. Comes with white, pre-67 Beetle knob NEW USED

EQ-919-30wEU-919-30w

12V Cigarette lighter Entire unit. Comes with white, pre-67 Beetle knob NEW USED

EQ-919-30BEU-919-30B

CigARETTE LigHTEREntire units. Element is common parts store item.

Cigarette lighters were virtually universal on "Detroit Iron" by the 50's, but were not at all common to VW's Until the early 70's, VW lighters were commonly dealer installed, so the type and look of especially the dash knob was nearly unique from car to car. Pre-67 Ghias always used a Ghia-shaped knob. Of course, spare Beetle knobs were what dealers had on hand. Soft, safety knobs didn't lend themselves to lighters until VW settled on a universal knob with replaceable 'center' inserts. Even then, dealers used what they had. What! Your heating element is worn out? Replace it with a generic element found at Auto Parts Stores. Want a totally new unit? The knob is not likely to be authentic.

Fusebox, 12 fuseTypical of ‘72 only

Fusebox, 12 fuseTypical of ‘72 only

Dash nut escutcheon

56-57 Headlite-swtchBuilt-in escutcheon

58-67 Headlite-swtch10 mm escutcheon



Typical E-switch 66-68.5

Typical E-switch 68.5-74

Currentreplacement

Cigarette lighter

Not availableOEM style


TURn SignAL FLASHER RELAYFlashing indicator relay. Blinker.

56-61 Flasher relay, 6V. Museum correct for 56-61 (works 62-66). Rare. KA-953-185B62-66 62-66 Flasher relay, 6V. "Unicorn" mount screw. (63-5 may need

ground strap) BQ-953-185C56-66 56-66 Flasher relay, 6V. USA tubular can style. Good H-duty, non-stock

looking relay. Use on daily driver. Install expensive OEM relay for shows. BE-953-185C

Warning: Assembly line relays use outdated technology. Current replacement relays live longer, function better and use elec-tronic components. But, they do not LOOK like assembly line parts. There are 3 types of relays available: 1) True OE lookalikes, with obsolete technology: scarce, and expensive. Occasionally surviving 1 or 2 decades. 2) Updated technology, with quality components: moderately expensive and modern looking. The Methuselah of relays. And, 3) The old technology packaged in an USA-style cannister: Amazingly cheap, but looks like a marshmellow. Quality depends on country of origin.

68-70Turn signal face

No copper contact spring

71Turn signal face

w/copper contact spring(see letter C)

C

A

B

T-signal handletop view

A =’s USA modelswithout quick flash

B =’s Euro modelswith quick flash

Typical 61-67turn signal switch

Quick flash wire harness and "trigger"

68 5-70 T-sig relay OEM. Rectangular. Four terminals. Mounts thru hole in center. Yesteryears technology. Suggest only for true show cars.

T-sig relay New. Looks assemblyline. (As in 1 above) Suggest show cars only. UA-953-215CT-sig relay Used. Looks assemblyline. (As in 1 above) Suggest as inexpensive solution for daily driver. UU-953-215C

68 5-74 T-sig relay New. Thermal wire. (Looks like 2 above; functions like 1 above.) Must adapt to 68.5-70. Universal.Suggest as slightly expensive solution for 71-up and as relay “everyone” sells for 68.5-70 cars. BE-953-227D

68 5-74 T-sig relay New. Electronic. Hella. Uses integrated circuits.Looks/ func-tions like 2 above. Long-lasting, tough. Must adapt to 68.5-70 cars.(A com-mon adaption.) Universal.Suggest as moderate $ relay for daily driver. BQ-953-227D

68 5-74 T-sig relay New. Thermal wire. Cannister-shape. (Looks/functions like 3 above.) USA. Quality is good. Universal. Instructions for adapting included. Suggest as cheap, non-stock looking, 5 yr. life-span solution. ZE-953-227D

NOTE: 1, 2, 3 refer to text in above warning

OEMfour

terminal“box”

As in 1 above

Modernelectronicrectangle

Generally, 2 above


TAnK SEnDing UniTSFuel gauge part found in tank.

56-60 Tank sending unit Cylindrical. 6V. Extra long to fit humped tank.USED Rare. Expensive. BU-919-051

61 Tank sending unit Cylindrical. 6V. USED. Shorter length. BU-919-05262-66 Tank sending unit “Grasshopper leg”-style. Mechanical. Operated

by a cable. Failure of non-replacable seals causes odor problemsUsed, seal is usually cracked.

BE-919-047BU-919-047

67-73 Tank sending unit Again, cylindrical. NewUSED

BA-919-052BU-919-052

74 Tank sending unit NEW. “Grasshopper leg”-style.Used

BA-919-049BU-919-049

56-74 Gasket, between tank and unit.Tank gasket OEM. Fine seal. BQ-919-133

56-73 Cap, tank sending unit. USED. BU-919-137igniTion SwiTCH:

Ignition switch troubles? Want to blame the lock and tumblers? Don't, without first investigating the electrical portion of the switch. The first, and prime suspect with ignition switch woes is always the electrical portion of the switch. ('68 and up)

56-66 Ignition Switch with keys Used, price varies on condition and key type, very limited supply inquire

56-66 Ignition switch / with 2 keys Bug style. Must “washer” foot as it touches top of slopping dash metal. (No rubber gasket available for the face of switch as it passes thru dash. 62.5-66.) Bw-905-803D

67 Ignition switch Rare. Huge face. Angled in dash. inquireIgnition switch The lock keys portion only.

68-70 Lock part of ignition switch OE-style. 2 keys. Bw-905-85368-70 Lock part of ignition switch OE BA. Works perfectly. Face is

lettered in Portuguese! A workable solution. BE-905-85371-74 Lock part of ignition switch OE style. 2 keys. BQ-905-85568-70 Ignition switch, electrical portion. YQ-905-865A

71 Ignition switch, electrical portion. BQ-905-865F72-74 5 Ignition switch, electrical portion. BQ-905-865K74 5-up Ignition switch, electrical portion. BQ-905-865L

ELECTRiCAL STiCKERSAll 12 Volt “Lightning strike” This sticker was found on the door jamb

of all U.S. market Ghias from 67 thru mid-68. It is a great way to identify any 6 volt car converted to 12 volts. BQ-900-275

Typical 6v 56-60 tank sending unit

extra long

Typical 12v 67-73.5 tank sending unit

Typical 61-66mechanical

sending unitTypical cap

tank sending unit

Typical 73.5-74 “Grasshopper

legged” sending unit

Gasket

Electrical portionas seen from the

wire harness.

74.5-up

72-74.5

Typical electricalportion of ignition

switch as seen fromthe tip of the key.


inTERioR LiTE SwiTCH(Door jamb switch). Turns on dome lite, etc.

Door jamb contact switch Single pole. 1/4 in. tab.61-6970-74

Jamb switch Single pole. Left and right doors.Jamb switch Single pole. Right door only.

BQ-947-560BQ-947-560

70-74 Door jamb switch Four pole. Left door only. 110 in. tabs. BQ-947-56161-74 Seal, dr. jamb switch. Hooded. Pr. Can be used with either of above

switches. Hooded to prevent air flow. H of G. BQ-947-56561-74 Screw, dr. jamb switch. Holds switch to door jamb. TFP-35-13ZB

inTERioR LiTE LEnS

Don't kid yourself! Just because items like interior lenses once existed, and are even illustrated in the catalog, doesn't mean they still exist. Do you sincerely believe a pristine example is waiting for you to purchase for mere pennies? Ha! Ha! Don't hold your breath. Most restorers start by buying all the glamour items first. Then, when the restoration is nearly complete, they start searching for the tough to find, never to be reproduced goodies. Knowledgeable buffs will politely tell you,"That's bass-ackwards!" Get the tough parts first. You can buy the repros at will. Truly hard to find parts sel-dom become easier...or cheaper... to locate.

56-57 Interior lite bulbholder/switch Rare. Inquire., Sometime NOS is available KU-947-115

56-57 Interior lite lens or cover With metal edge. Inquire. Sometimes NOS is available (KA. KU-947-125

58-64 Interior lite lens Very good repro gQ-947-11158-64 Interior lite lens Lens and switch. USED, “sow-bug” white

switch. Snap-on connectors gU-947-11165-67 Interior lite lens Lens and switch. USED. Fits in massive,

chrome mirror base. More Ghias needing this lens exist thanlenses. Yep! Supply and demand conflict ahead!

NEW very nice repro. era correct.USED in decent condition.

VQ-947-111VU-947-113

68-74 Interior lite lens Lens and switch. Fits in stem of mirror.

Lens and switch Superb repro. White. Spearhead shaped. VQ-947-111Lens and switch Used. Spearhead shaped. VU-947-111

MiSCELLAnEoUS SwiTCHES:56-65

56-6061-65

Headlite dimmer switch Floor mount. Snap-on connectors NEW decent repro. made of plastic USED metal with screw termanals.USED metal with spade termanals.

BQ-941-561BU-941-561

BU-941-561A66-74 Oil pressure switch Snap-on connectors. BQ-919-08167-74 Back-up lite switch W / manual tranny. BQ-941-52156-69 Brake lite switch Stop lite. 2 terminal snap-on connectors. Mounts

on master cylinder. BQ-945-515H70-74 Brake lite switch Stop lite. 3 terminal snap-on connector. Mounts

on master cylinder. BQ-945-515g68-70 Dual circuit brake warning lite USED. “U” push lens to check lite

Do not use on later cars. BU-919-233Dual circuit brake warning lite Bulb is automatically tested when ignition is turned on. Adapts to earlier cars. Circular unit in dash.

7172-74

Brake warning lite NEW. Circular shape.Brake warning lite USED. Square shape.

BU-919-233ABU-919-234

Dr. swtchsingle pole

Hoodedseal

Four pole

56-59

60-64

65-67

68-74

All interior lites as

seen from back or

bulb side

Dimmerswitch

Oilpressure

switch

Back-up switch2 term.brake

lite switch

3 term.brake

lite switch

Brake warning lite

67Wiper Parts

wiper PartsThe two styles of wiper arm/wiper blade connection

Hook Wand(with set screw

56-67 5(wand)

Thin wand/set screw style of wiper arm NOS Authentic in length (280 mm), shape, color, construction and OE manufacturer. Ea, VHTF. KA-955-425Repro KQ-955-425Used KU-955-425

67 5-67(hook)

Hook end on arm snaps into “catch” on blade NOS Sometimes available, KA-955-425AQuality Typically Bosch Black, not authentic looking but work well KQ-955-425AUsed, original wiper blades, sometimes available. KU-955-425A

68-73 NOS Sometimes available, . KA-955-425BQuality Typically Bosch Black, not authentic looking but work well KQ-955-425BUsed, original wiper blades, sometime available KU-955-425B

74-74 NOS Sometimes available, KA-955-425CQuality Typically Bosch Black, not authentic looking but work well KQ-955-425CUsed, original wiper blades, sometime available KU-955-425C

56-67 5 Wiper blade refill rubber, pair KQ-955-429

Typical Hook style

blade

wiPER BLADES


Aircooled VW engines are really largely OIL COOLED! Check your oil level at least at every gas fill-up!

wiPER ARMSThin wand/smooth base arms Check for availability.

56-67 5 Wand style Used. Correct in color, length, OE manufacturer, location of set-screw to shaft and set screw to blade.

LH, Wand style wiper armRH, Wand style wiper arm

KU-955-431KU-955-432

56-67 5 Wand style Repro. . KQ-955-411Hook style arms

67 5-67 Hook style/ no hole in head, mounts by set screw. Both the same length. Support no more than 12 inch blades. Silver. Authen-tic for 67.5 to end 67. Works thru 69. KU-945-407A

68-69 Hook /no hole in head, mounts with set screw, Silver. L and R specific (LH arm longer, bent differently than RH.) Authentic 68-69 Use13 in.blade .

LH, Hook style wiper arm. RH, Hook style wiper arm.

KU-945-407BKU-945-408B

68-69 Hook/no hole in head, mounts with set screw, Silver. Both arms same length. Often adapted from OE or repro Bug arms. Use no more than 12 inch blade. Will “park” blade at different angle on glass. Swept area is less. best choice,best buy for street Ghias. KQ-945-407B

70-72 Hook with hole in head, Silver L and R specific. (LH arm is longer, bent differently) Authentic70-72. Uses 13 inch blade.

LH, Hook style arm, Small hole in head.RH, Hook style arm, Small hole in head.

KU-945-407CKU-945-408C

70-72 Hook with hole in head Both arms of same length. Often adapted from OE or repro Bug arm. Use no more than 12 inch blade. Will “park” blade at different angle on glass. Swept area is less. Best choice / buy for street Ghias. KQ-945-407C

73-74 Hook with hole in head arms Black. L and R specific. (LH arm is longer, bent differently) Authentic 73-74. Use 13 inch blade.

LH, Hook style wiper arm. OE KG. Large hole in head.RH, Hook style wiper arm. OE KG. Large hole in head.

KU-945-407DKU-945-408D

73-74 Hook with hole in head arms Both arms of the same length. Often adapted from OE or repro Bug arms. Use 13 in. blade. Will “park” blade at different angle on glass. Swept area is less. Probably the best choice and buy for street Ghias. KQ-945-407D

Three styles ofwiper arm

Thin wand56-67.5

Hook (no hole in head)67.5-69

Hook (hole in head)70-72 Silver73-74 Black

hole in head

56-67.5 67.5-69 70-74

Wiper arm bases

Smooth baseThin wand: 1/8 inch

No visible pivot point

No “hole in head”1/4” inch wide armObviously pivots

Hole in head for shaft1/4” inch wide armObviously pivots

69Wiper Parts

wiPER SHAFT PARTSShaft sticks up thru cowl, rotates arm.

Wiper shafts H of G. Each.60-6768-6970-7273-74

Wpr shaft Small pivot/post, smooth tip. Arm held by set scrw.Wpr shaft Large pivot post, smooth tip. Arm held by set scrw.Wpr shaft Large pivot post, threaded tip. Arm held by a nut.Wpr shaft Large pivot post threaded tip is shorter.

KQ-955-217KQ-955-218KQ-955-219KQ-955-220

Wiper shaft grommets Surrounds shaft thru cowl. H of G.60-69 Wpr shaft grommets 2 pcs per shaft.Inner& outer. (4 pc. kit.) BQ-955-265

Wpr shaft grommets Two pieces. Like grooved tire.70-7470-7273-74

Shaft grmmts Ouality repro. Ozone resistent. H of G.Cap nut Arm to shaft. Always visible. Hexagon nut Arm to shaft. Hidden in arm base. .

YQ-955-261UZ-955-41P

nHX-06-00ZBWiper shaft cover Fits tip of shaft. Keeps rain out of shaft. Pair.

60-6970-7273-74

Wpr shft cover. Simple, knurled “skull” cap. Plastic. Pair.Wpr shft cover. Thumb sized plastic tent. Pair.Wpr shft cover. Plug. Fills hole in end of arm base. Pr.

BQ-955-27PUQ-955-27PSA-955-435

Nut Holds shaft to outer cowl. Visable from ouside. Pr.56-6970-7460-69

Nut Shaft to cowl. Bright. Thin hex. Pr.Nut Shaft to cowl. Brass. Thin hex. Pr.Special notched washer Under cowl nut. Ea.

BQ-955-24PYQ-955-24PBQ-955-245

Wiper switch 56-59

60-61

Wpr switch Repro. Single speed.USED good condition Wpr switch USED. Bellows style. Rubber so-so.

BQ-955-511BU-955-511BU-955-515

Wpr switch Current Vw parts counter adaption. 2 speed.62-66 Wpr switch, single sped, used, 10mm KU-955-515A56-6759-67

Wpr swtch New. SWF. Correct for dash hole.10mm Wpr swtch USED. SWF. Correct for dash hole, 10mm

KA-955-517KU-955-517

Wpr switch OE correct. Uses 14 mm escutcheon.68-7168-71

Wpr swtch New. SWF.Wpr swtch USED. SWF.

KA-955-517AKU-955-517A

72-74 Wpr switch Lever on column. New. SWF. BA-953-519EWiper knob W/push-button. Also found in dash knob kits.

58-63 563 5-66

56-5767

68-7068-70

7171

Wiper knob Ivory. A yellowish-white. Era correct. Repro.Wiper knob Silver Beige. Silver (gray) wht. Era crrct. Repro.Wiper knob Beetle shape. White. Econo solution.Repro.Wiper knob USED. Black. Safety soft.Wiper knob Repro. W/push button. Safety soft. Flat back.Wiper knob USED. W/push button.Safety soft.Flatback.Wiper knob Repro. W/push bttn. Safesoft. Terraced back.Wiper knob USED. W/push bttn. Safesoft. Terraced back.

KQ-998-541wKQ-998-541SBQ-998-541S

BU-998-541 CBQ-998-541BBU-998-541BBQ-998-541HBU-998-541H

60-67Tiny pivot post

Smooth shaft end

70-74Large pivot post

Threaded shaft end

Typical 68-71

Typical 58-66

Typical 2 speedwiper switch

62-71

Typical bellowswiper switch

68-69Large pivot post

Smooth shaft end

Shaft end

Pivotpost

60-69 shaftsmooth tip

70-74 shaftThreaded tip

60-69 two piece‘wiper shaft grommets

70-74 one piecewiper shaft grommets


wASHER SPRAY noZZLE & PARTSWasher nozzle The two styles interchange but parts don’t.

61-74 Nozzle Gray “helmut”. Two mounting prongs. OE. BA-955-99161-74 Nozzle Black “helmut”. Off-set mounting prong does not pull

evenly on cowl hole (but, removes easier). Current replacement. BA-955-99360-70

71-74

Seal Washer nozzle. Fits under assembly line two nozzle sprayer with stainless steel or gray plastic “helmut”. Does not fit current replacement, off-set prong, black nozzles.Seal washer nozzle. a bit bigger than the 60-70 style

BQ-971-913BQ-971-914

Washer air bottle Wash bottle. Under gas tank.W/built-in pressur-izing valve. (U-provide cap/stemmed sealing disc.)

6061-6761-6768-74

Bottle HTF rectangular shaped Bottle Kidney shaped. NOS.Just bottle. Need knob w/ plunger.Bottle Kidney shaped. USED. Just bottle. Need knob w/plunger.Bottle Grape shaped. USED. Just the bottle.

BU-955-945BA-955-453BU-955-453YU-955-453

Accessory hose & valve Allows tire to pressurize sprayer.

62-6768-74

Hose/valve, for kidney shaped bottle.Hose/valve, for hanging grape bottle.

BA-955-979YA-955-979

wiPER MoToR

Yes! It is true. A 67 Ghia wiper motor (67-68.5) fits most earlier Ghias and is an instant, bolt-in way of converting to 12 volt wipers. Of course, if you've figured it out, so have ten's of thousands of other Ghia buffs. So, here is another "truth". Low supply (essentially, one year only) and high demand (all those 6 volt Ghia owners) mean a high price, IF any used ones still exist.

60-66 Wiper motor USED. 6V. “Can cover held on with bale” style. KU-955-111D67 Wiper Motor, Used, 12V, looks like 6V KU-955-113A

68-68 5 Wiper motor, Used, 12v, like 67 motor but larger pin for pivot shaft connecting rods KU-955-113C

68 5-70 Wiper motor USED. 12. Takes 2 hands to surround motor. Fruit cock-tail can sized canister.

KU-955-113E71-74 Wiper motor USED. 12V. One hand can almost surround motor.

Orange juice concentrate or tubed biscuit sized canister. KU-955-113H

Typical62-71

2-speedswitch

NozzleTwo prong

nozzleOff-set prong

nozzleSpecial hose

and valve

68-74Grapeshape

61-67Kidneyshape

60-66 68.5-70 71-74

71Dash Knobs & Instruments

A knob is a knob, only if you are driving a truck! Especially on early Ghias, stock knobs add interior grace and beauty.

Dash Knobs & instruments

Screw on knobs 56-5756-57

58-63 558-63 563 5-66

Beetle “terraced” screw on knob Ivory. Qual Repro.Ea.Beetle “terraced” screw on knob Beige/wht. Econo. Ea.Karmann Ghia “tulip” screw on knob Ivory. Qual repro. Ea.Karamnn Ghia “tulip” screw on knob Silver Beige . Ea.Karmann Ghia “tulip” screw on knob Silver Beige. Ea.

BQ-941-54VBQ-941-54wKQ-541-54VKQ-941-54SKQ-941-54S

67 Black safety knob USED. Smoothface. Ea. BU-941-54158-66

67-71

Fresh air control levers New . made from billet and powder coatedIvory (tan)Silver Beige (white)

Fresh air control lever USED. Black safety knob. Found on LH side of dash. Smoothface. Ea.

KQ-941-5iVKQ-941-5SB

BU-941-5416667

68-7071-74

Emer lite knob Red plastic. Lighted. USED. W/shaft. Ea.Emer lite knob Safety knob. Rounded face. USED. Lighted. Ea.Safety knob H-lite. USED.Flat back. W/international logo. Ea.Safety knob H-lite. USED.Terraced back. W/internat. logo. Ea.

YU-943-241BU-953-245ABU-953-245BBU-953-245g

DASH KnoBSSee also dash knob kits (center pages) & wiper knob.

Side view ofknob shapes

68-70 71-74

SPEEDoMETER PARTS.

Speedometers In miles per hour.56-59 Speedo USED. . KU-957-02360-66 Speedo, Used, Wil work on 56-59 karmann ghias BU-957-023

67 Speedo USED. One jewel at top center of speedo. KU-957-01968 Speedo USED. Four jewels. Records only at mile intervals. KU-957-020

69-71 Speedo USED. Four jewels. Records 1/10 of a mile. KU-957-02172-73 Speedo USED. Tunneled face. Outer ring chrome. YU-957-031C73-74 Speedo USED. Tunneled face. Outer ring black chrome. YU-957-033D

Speedometer cable with armored housing 56-66 Speedo cable Quality. You can buy much cheaper cables, but

better? Not likely! KQ-957-801C56-66 Speedo cable Repro. An economical choice. KE-957-801C67-71 Speedo cable German BA-957-801H67-71 Speedo cable Repro. This is both cheap and inexpensive. BE-957-801H72-74 Speedo cable Unique ‘Bayonet’ Quick-lock con nection to

speedo. Call! We have these from time to time. FZ-957-80156-74 Clip Speedo cable. At spindle end. Holds cable to grease cap. wLK-04-XXB56-74 Grommet, speedo cable thru inner fender. Quality. BQ-957-861

TypicalSpeedo56-66

Speedocable

Clip

Grommet


REBUiLT CLoCKSWork w/new lens, cleaned, repaired, tested.

Info on clocks: Today's quartz/electronic clocks have spoiled most people. They offer super accuracy and longevity. But, quartz clocks were not available for automotive use until the mid-70's. A Ghia mechanical clock is electrically wound. They are quality clocks, but are to time-keeping as the bow and arrow is to warfare. An extinct technology! We'll probably be able to fix original clocks, but it will never work so as to lose/gain only seconds a month. Don't expect more accuracy than your clock can give!

56-66 Large clock 6v. Repaired. (Exchange).. KR-919-20156-66 Large clock 12V. Converted to 12V. (Exchange).. KR-919-21256-66 Large clock USED. To fill dash hole. Looks great. May not work! KU-919-20167-71 Small clock 12V. Repaired. (Exchange). KR-919-19767-71 Small clock USED. To fill dash hole. Looks great. May not work! KU-919-197

56-66 Ornamental chrome ring Speedo & clock to dash. Need 2. V-gd.New, GermanUsed

BQ-957-371DBU-957-371D

56-66 Instrument face seal Seals speedo & clock to dash opening. Large circular seal. If missing. air slithers thru dash, chilling your hands. BA-957-375

WARNING: 72-74 clocks also house the fuel guage. Logic suggests they are two separate systems, each independently repairable. The reality is that somehow they are intertwined. Yep! your clock can stop your fuel guage. And, your fuel guage can fluster your clock. We have not yet figured out what's wrong. Every owner of a quartz clock (late 73 thru74) has phoned. "Repair my clock!". they demand. Can't do it! No re-tailer likes to say, NO. But for now, there may not be a solution to your non-working clock.

Info on fuel guages: Electrical guages. The dash unit seldom goes wrong. So first suspect the electrical connections. Check, clean and wire brush all connectors. 2nd, Just repainted the car? The pointed mounting brackets for most guages are intended to PIERCE the paint on the back of the dash, creating an electrical ground. 3rd, Look closely at your tank sending unit. Only then suspect your dash guage. Mechanical guages only give trouble if the cable or housing becomes brittle/breaks.

FUEL gUAgEDash unit.

57-61 Circular gas guage USED. Works with electrical sending unit. KU-919-02562-66 Circular gas guage Used. Mechanical.Sending unit pulls cable. . KU-919-02967-71 Circular gas guage USED. Works with electrical sending unit. KU-919-02772-73

7474

Gas Guage, mounted inside the speedo, Gas gauge mounted inside of the speedo Gas gauge Vibrator Help with shakey gas gauge.

KU-919-045KU-919-045A

KQ-951-099

Most gas tanks rust from the INSIDE out. Why? Condensation from sitting. A Ghia used daily, seldom rusts out its gas tank. Extra water is burned before it does damage. So. today's "Garage Queen" Ghia will be hard on gas tanks. The best replacement gas tanks are new, German… breathtakingly expen-sive and usually unavailable. 2nd best? Your used tank; cleaned and chemically sealed. 3rd best? A Brazilian or Mexican tank, first tested with your fuel guage sending unit to insure fit; and then chemi-cally coated. While not show authentic, in-line gas filters are a great idea. Be sure and clamp all con-nections. Slip fitting a gas filter into a spliced fuel line is just begging, "Torch me! Torch me!"

Fuel System Parts

gAS TAnK PARTS AnD FiTTingS56-60 Gas tank USED. Rare. Check for availability. (Not shown) BU-201-07361-67 Gas tank New. Bz.Fills under hood.

Gas tank, USED. In good conditionBQ-201-075BU-201-075

69-74 Gas tank New. Bz. Fill thru RH fender.Urge 68 Ghias to use this tankUSED

BQ-201-075BU-201-077

61-67 Gas cap Used. 80 mm. Inquire. BU-201-551

56-66clock

67-71clock

72-74 clock& fuel guage

67-71Electrical

guage

62-66 Mechanicalgas guage

61-67

69-74

Gas cap

Gas capgasket

Tankopening

73Fuel System Parts

AiR CLEAnERS AnD PARTSAir cleaner ‘elbow’ Connection between carb top and air cleaner canister.

56-60 Metal USED. w/o fan housing bracket. KU-129-615B61-65 Metal USED. w/o fan housing bracket. KU-129-615C66-67 Used, Cleaner to center rubber piece

Used , Carb ro center rubber pieceUU-129-617UU-129-619

68-74 Rubber Sleeve, ReproRbber Sleeve, USED.

UQ-129-615EUU-129-615E

56-65 Mounting bracket, elbow to fan housing. Metal. USED. UU-129-68766-67 Sleeve, air cleaner elbow. Rubber. Repro. A quality piece UQ-129-62766-67 Sleeve, air cleaner elbow. Rubber. USED. UU-129-627

Air cleaner cannister 56-60 USED UU-129-61161-65 USED 'Clip-on' style UU-129-613D66-67 USED KU-129-61368-70 USED Without tube for charcoal cannister connection UU-129-607B

71 USED With opening for charcoal cannister connection UU-129-607C72-74 USED With vacuum can on snout UU-129-607D

61-67 Gas cap Fits current replacement gas tanks (i.e. above); both stock and long range. No one tells you a different cap is needed with today’s tanks! True VW cap with great looking VW logo embossed. BU-201-551

61-67 Gas cap Replaces era style caps.70 mm. Vented. An advantage. Plain topped. No VW logo. gQ-201-551

68-72 5 Gas cap OEM style. 65 mm. Good quality. Taiwan Ch # 142-2139-975 BE-201-55268-72 5 Locking gas cap Quality German accessory. What VW would have

sent. 2 keys. Especially useful for 68 Ghias. AQ-201-55272 5-74 Gas cap Threaded. Non locking. Repro. Quality. Fm. Ch# 142-2139-975 BQ-201-553

56-74 Fuel strainer--filter (in tank) Tubular. Fine copper wire mesh screen. BQ-209-14768 Fuel filler pipe, HTF. Connects cap tp gas tank. Non-threaded cap KU-201-128

69-72 5 Fuel filler pipe, metal. Connects cap to gas tank. Non-threaded cap. KU-201-12972 5-74 Fuel filler pipe, metal. Connects cap to gas tank. Threaded cap. KU-201-130

69-7469-74

Large flexhose Connects gas filler tube with inlet on tank cornerFiller neck seal, Seals the large flex hose from filler neck to tank

KQ-201-219KQ-201-215

69-74 Flex hose with seals, helps prevent fuel smell KQ-201-21K69-74 Grommet, Fuel filler neck to wheelhouse. USED KU-201-139

Outletrepair

kit

Gas capthreaded

Grommetfiller neckto whlhse

Large flexhose

Typical56-65elbow

Typical66-67elbow

Typical68-74elbow

Rubber Rubber

Bracketto fan

housing

61-6566-67 68-70 72


We firmly believe the best reproduction parts come from countries who’s workers at least have seen a Karmann Ghiain person. That means we don’t often shop for repro parts in China, Mongolia, or Uganda. Others do! Be careful!

interior PartsinTERioR MiRRoRS AnD LEnSES

Rebuilt mirrors Exchange. New looking. Gorgeous. Mirror glass replaced and re-silvered. Neckholding mirror is smoothed/rechromed. Mirror back polished. Visor shafts rechromed. Mount smoothed, polished (and if original, chromed.) Price includes a $35 deposit, as a reminder. Return your resuable mirrorNOTE: This service is not curretnly available Please inquire.

56-57 Long visor shaft “Long horn” style. (210 mm). Short ‘J’shaped mirror shaft. Usually with ‘see thru’ visors. KR-857-520

58-64 Short visor shaft (150 mm). COUPES. ‘J’ shaped mirror shaft is standard length. KR-857-521

58-64 Short visor shaft (150 mm). CONVERTIBLES. ’J’ shaped mirror shaft is extended. KR-857-522

65-66 No visor shaft Huge, chromed lite housing. (U-provide lite). Backing for mirror is polished aluminum. KR-857-523

New old stock (NOS) mirrors Brand new. Tight pivot head.68-74 NOS, never installed mirrors. You provide lite, and white mount to roof.

Has day/nite lever.beautiful. VA-947-131

56-5758-5958-5960-6460-6465-66

67

6869-74

USED mirrors We have these in all kinds of condtions so please call to inquire about price and mirror’s condition.

USED mirror Includes visor shafts USED mirror, Coupe, includes visor shaftsUSED mirror, Convertible, USED mirror Coupe, Includes visor shafts USED mirror, ConvertibleUSED mirror New style base, same aluminum mirror surroundUSED mirror, Similar to 65-66 mirror, but has plastic mirror sur-roundUSED mirror USED Mirror

KU-857-520KU-857-521KU-857-522

KU-857-521AKU-857-522A

KU-857-523KU-857-527VU-947-131

VU-947-131A68-74 Mirror mounting bracket USED. White. Soft pebble grain vinyl.

Contains electrical contacts to energize stem of mirror. VU-947-133Mirror mounting screws Hold mirror to roof.

56-6465-6768-74

Mirror screws PerMirror screws Vertical. Screws from bottom. Per.Mirror screws Need 3. One under round vinyl plug.

ToP-39-13SDToP-35-16SBToP-42-13SD

.

56-57 58-64 65-67 68, 69-74

Lenses soldseparately

Typical decades oldinterior mirror

Rusty shaftwhere exposed

Mirror backdull and oxidized

Dead spotsin the silvering

"Turkey necked"rusty, red, and rough

68from backside

no day/nite tab

69-74from backsideday/nite tab

Mountscrew

Mirror bracket

75Interior Parts

USED SUn ViSoRS AnD PARTS

56-57 Visors NEW. Translucent green. (Sunglass style) with metal frame. Pivots up/down from one end. Made for Bugs, but will work for Ghia

LHRH

BQ-857-511BQ-857-512

58-64 Visors Repro White padded w/pebble-grained vinyl. Heat seamed edges (as original). Pivots up/down from one end. You punch shaft hole. Authentic 61-64. Works in place of waffle patterned 58-60.

See interior section for visor part numbers65-74 Visors White padded w/pebble-grained vinyl. Correct Ghia shape. Pivots

up/down and to side. Works on all Verts. Verts from69.5-up must use your sunvisor base. No vanity mirror. Much better pivot mechanism than stock.

See Interior section for visor part numbersWe do have a selection of used visors, please inquire

65-74 Visor pivot screws (Coupe) 4 pak.65-69 5 Visor pivot screws (Vert) 4 pak.(69.5-up verts see Convertible

section.)Sunvisor clip Found at center of windshield. Grasps one end of visor.

65-67 Visor clips OEM. German. Lor R pair. White. The best. BA-857-56P65-67 Visor clips Repro. L or R pair. White. BQ-857-56P68-74 Visor clips OEM. German. L&R pair. White. The best. BA-857-57P68-74 Visor clips Repro. L&R pair. White. BQ-857-57P65-67 Visor/mirror base screws 4 pak. Need 2. ToP-42-19SB68-74 Visor clip screws 4 pak. Need 2. ToP-42-13ZB

56-57 “see thru”

58-64

65-74

65-67

68-74

Typical Beetle

Deeper. More squarish.When pivoted, hits Ghia mirror.

HoRn ACTiVATing (BLowing) PARTSAs found in the cockpit.

58-59 Horn ring USED. VHTF 58, Horn Button screws to ring59, Horn Button pushes on to the horn ring . inQUiRE

60-71 Horn ring Half-moon style. Chrome. Gd repro. Museum 71’s used a “painted” satin chrome finish blowing ring. BQ-951-531

61-65 Horn blowing lever USED. . gU-951-53158 Ornamental cover, plastic. Screws to horn ring. Matte blck. U-pro-

vide badge. KE-951-52960-71 Horn button Repro. Nice. Black, with 3-D castle/wolf. BQ-415-66958-59 Horn ring insulating bushings Kit. Multiple pieces. KQ-951-97160-71 Horn ring insulating bushings Kit. H of G. BQ-951-98260-71 Springs (3) / Screws (3) For ontact plate.USED. BU-951-98360-71 Brass contact plate/washer Large disc shaped.

NEWUSED

BQ-951-563BU-951-563

badge attaches to face of cover

58-59Blowing

ring

Cover

Brass plate

Variousmid-60’s

Lever(not ring)

Half-moonring

60-71

SpringInsulatingbushings

Screw


DASH PADS.

Early dash pads, thru 67, were not pad-ded and were not meant to provide a soft landing in an accident. The pads were anti-reflection devices. American drivers howled piteously about reflec-tions in the windshield caused by the elegant, simple 56-59 painted dash top. A crinkled, pebble grained vinyl was VW's anti-dazzle device. Later came US safety mandated "padded" dashes.

Typical of:60-67

70-74

68-74

Defroster outlet covers

Simpleanti-reflection pad

Padded safety cover

Typical knee pads

Slotted defrost outlet opening in vinyl. Typical of 60-69.

Notched defrost outlet opening in pad. 8 inch notch. Typical of 70 only.

Notched defrost outlet opening in pad. 13 inch notch. Found on 71-74.

Don’t mistake the metal/plastic cover plate used over the defroster opening on 70 and up Ghias as a slot. When the cover plate is removed the pad itself is likely to be definately notched.

Dash mask installation is simple, easy and time consuming. Patience! Patience! Your reward? A great looking dash.

58-60 Ribbed Dash Pad, Excellent Repro KQ-857-67864-67 Fiberglass Repro, very good replacement pad, HoG KQ-857-67968-69 Repro pad, very good quality and fit KQ-857-681A

70 Repro pad, not a good fit at all, but its all there is. KQ-857-681B71-74 Repro pad, vey good quality and fit is decent KQ-857-681C

Wood-grained or black pebble-grained dash mask Thermo-formed, as original. All major openings nicely pre-identified, but you cut them out with a razor knife. Work from center of dash to each edge to minimize errors.

6768-7172-74

Wood-grained mask Includes cover for glove box.Wood-grained mask Includes cover for glove box.Black, pebble-grained mask. W/glv box cover.

KQ-857-071KQ-857-082KQ-857-093

56-63 Radio speaker grille Qual. Repro. H of G KQ-857-215Grab bar (Chicken bar) On passenger side dash top. USED.

56-5960-67

Grab bar U-paint, redo vinyl. One stud per side. USED.Grab bar Black plastic. Use as is. 2 studsper side. USED.

KU-857-641KU-857-643

Ash tray All have been used. Perfect, trays, used only to hold gum wrappers, are today’s ideal not yesterday’s reality.

56-65 Ash tray In dash mounted. Remember to repaint ash tray face when painting dash. BU-857-33KAsh tray Hangs below center of dash. Chrome face.

66-6766-6768-74

NOS Beautiful. New. Complete.USED Wo/dash mount.Gd chrome.USED Blck grained vinyl face.

gA-857-301 gU-857-301 KU-857-301

60-67

56-59

77Interior Parts

Do you get Claustrophobic? Black headliners give the visual illusion of living in a small cave. White gives the illusion of space.

More headliner options available in upholstery section56-74 Headliner rods USED. Hold headliner in place. 4 pak. KU-867-52K56-67 Chrome coat hooks USED. Pair. Good chrome. Above Quarter

window. KU-857-63468-74 Coat/seat belt plastic hook White, sturdy nylon. Museum stock

72-74. Works nicely 68-71. Much stouter. Pr. KQ-857-63P56-74 Screws, coat/seat belt hook. Need 2 per. 4 pak. ToP-29-95ZD

Rear wndw package tray (Parcel shelf) Cpes. Under rear wndw. Replaces stock vinyl pad. Long lasting, good looking ABS ther-moformed pebble-grained plastic.

Plastic package tray cover With defroster slot and a screw hole for bunge cord (rubber) style rear seat strap.

56-6756-67

Black package tray cover Slot/1 hole.White package tray cover Slot/1hole.

AQ-86B-635AQ-86w-635

Plastic package tray cover With defroster slot and holes for plastic strap style of rear seat clip.

68-7068-70

Black package tray cover Slot/2 holes.White package tray cover Slot/2holes.

AQ-86B-636AQ-86w-636

Plastic package tray cover With no defroster slot.71-7471-74

Black package tray cover No slot.White package tray cover No slot.

AQ-86B-637AQ-86w-637

60-70 Rear window metal defroster grille USED. KU-255-65156-74 Package tray edge trim 56-67, Used. KU-853-371

Package tray edge trim 68-74, Used KU-853-371A

gLoVE BoX & PARTS

Glove box liner Plastic. Molded. Much stronger, longer lastingthan stock papier mache

56-67 Glove box No levers or connection to front hood. KQ-857-10168-74 Glove box U-drillout oldlever, install in this box. KQ-857-10156-67 Used, sometimes avalable, dont get yer hopes up KU-857-10168-71 Used, large lid release mechanism, sometimes available KU-857-101A72-74 Used, small lid release mechanish, sometimes available KU-857-101B

Glove box door lock 56-67 Push-button glv bx lock New. Dime sized hole. BA-857-13156-67 Push-button glv bx lock Used. Dime sized hole. BU-857-13156-67 Locking glv bx lock Adapted fm Bug. Works/looks great. Two

keys. Meant for dime sized hole. BA-857-12768-74 Locking glv bx lock Bz repro. Works/looks great. Meant for

nickel sized hole. Two keys. BA-857-13156-74 Rubber stop Glv bx door frame. Need 2. Pair. BQ-857-145

CoUPE RooF AnD HEADLinERRemember! On a Ghia, headliner installation requires removal of all front and rear glass, the quarter win-dows and their mechanisms; and most aluminum door and quarter window seal channels. Not difficult! You can do it!

Chrome coat hook

56-67

Seatbelthook 68-up

Package tray

cover location

Typicalpackage tray

Rear windowdefroster grille

Package trayedge trim


56-67 Rubber (bunge cord) rear seat strap White Era correct 56-64. Quality.Gd stretch/rebound.Black Decent. Moderate strech/rebound. A Best Buy..

KQ-88w-585KE-88B-585

56-67 Screw cover/cap Rear seat rubber strap. Repro, does not look like originalUsed, chrome is always bad

KQ-885-587KU-885-587

56-67 Hook Metal. Found on package tray and rear seat base. Repro, can hardly tell from originalUsed, always need a good polishing to look nice.

VQ-885-561VU-885-561

68-74 Rear seat clip kit Cpe.Plastic strap on seat. Lug on shelf. Fine repro. H of G.BlackWhite

KQ-88B-56KKQ-88w-56K

56-72 Rear seat hinge Cpes. USED.Pair. Simple piano hinge. KU-885-57161-74 Circular heater outlet escutcheon USED. At base of rear seat.

Pair. Cover holes in carpet. Foot level heating KU-255-515

FLooR AnD REAR SEAT PARTS

SEAT FRAME PARTSFor Front Seats.

Seat release knob assembly Includes:Knob, clip and escutcheon at fabric opening. May contain mix ture of new and used parts. Read closely.

68-74 Current VW seat release knob New.Grooved for finger Bw-881-663EEra round seat release knob

68-72 572 5-74

Used knob New clip/escutcheon.Used knob New clip/escutcheon.

BU-881-663CBU-881-663D

Seat adjusting lever knob Lifting knob (connected to end of lever) controls movement of seat on tracks.

61-6768-74

Black,tapered, large knob w/ knurled tip.Black,tapered, petite knob w/knurled tip.

BQ-881-251BQ-881-253

Rubber rear seat strap

Screw cover forrear seat rubber strap

Hook for rear seat rubber strap

Rear seat clip kit

61-68 Heater outlet cover USED.. Cover shark gill shaped heat outletLHRH

KU-255-189KU-255-190

69-70 Heater outlet grilles USED. Found in rocker under door. Cable/lever operated. Side specific. U-pop rivet to upholstery board.

Left hand Cable operated.Right hand Cable operated.

KU-819-189KU-819-190

71 Heater outlet grilles USED. Found in rocker under door. Floor level knob operated. Side specific.

Left hand Operated by knob at floor level.Right hand Operated by knob at floor level.

KU-819-189AKU-819-190A

72-74 Heater outlet grilles USED. Found in rocker under door. Cable oper-ated, lever next to e-brake

Left HandRight Hand

KU-819-189BKU-819-190B

69-74 Screw, outlet grilles. Need 2 per. 4 pak. TPP-35-13ZD

Rear seat baseheater outlet. Sliding cover heat

outlet 61-68

Complex cable operatedheater outlet grilles. Floor. Knob operated

heater outlet grilles

Rod

Pull rodclip

Adjusting knob

Escutcheon

Ciip

Currentseat release

knob

Era seat release knob

79Engine Compartment Seals

Engine Compartment SealsSeals/ Engine Floor To Engine “Tin”

Firewall seal Attaches to forward part of engine compartment.56-7456-74

Seal, Firewall. German OEM. ExcellentSeal, Firewall. Decent repro. “B- to B” quality..

BA-813-741gBQ-813-741E

Rear of engine seal Shaped like a Huge “U”56-6656-6667-7467-74

Rear engine seal German OEM. Excellent.Rear engine seal Decent repro. “B- to B” qualityRear engine seal German OEM. Excellent.Rear engine seal Decent repro. “B- to B” quality.

BA-813-705ABQ-813-705ABA-813-705DBQ-813-705D

69-74 Rubber valve: Circular Quarter-sized drain valves on rear lockplate Valve, like an upside down umbrella. Letsout but not in. 4 pak. BA-801-17K

Want to win a trivia bet? The automotive items (since the Model T era) with the greatest number of reproduced "knock-offs"are: Ghia/Beetle engine seals and Mustang horse & corral grille emblems.

56-74 Air seals, spark plug. (At engine tin). Rubber. 4 pak. BQ-905-449Wire holders, spark plug.

59-6356-74

Wire holders OEM style. VW # 111-905-451. Can fit all.Wire holders Wire clip- in. Button snaps to ‘tin’. 3 pak.

BQ-905-451Bw-905-451

67-72 Boot/Generator post, D+, (12 V). Prevents accidental shorts. YQ-903-795

igniTion wiRE SEALS/HoLDERS

EnginE SHEETMETAL SEALS, HoSES, ETC

63-74 Hose/Fresh air tubes Fan shroud to exhaust. Wo/air-con. Plastic tubes. Won’t easily crush or dent. Always keep their shape. Pr. BQ-129-P87Fresh air hose base seal OEM type. Sits on sheet metal where fresh air tube passes thru. Pair.

63-707-74

Fresh air base seal Pair.Fresh air base seal Pair.

Bw-119-585Bw-119-586

61-67 Grommet Pre-heating pipe Bw-119-57162-74 Collar Oil filler breather tube. BQ-115-49161-74 Boot Road draft tube. Looks like mouth piece to a cheap clarinet. Yw-115-54171-74 Boot Dual port intake manifold. BQ-129-729B65-74 Sticker Valve setting info. OEM. Red /silver. Mounts on fan housing. 21Z-100-175

Firewall seal

Rear of engine seal

Typical ignition wires

Spark plug wire holders

Capwire end

at dist/coil

Air sealsspark plug at engine tin

Hosefresh

airtubes

BootGen post

Collarbreather tube

BootRoad draft tube

Preheat pipe grommet

Fresh air base seal

BootDual port intake Sticker

(o.15 mm .oo6”)

.

69-74 Seat adjustment pull rod Rod runs from side to side under seat. Connects locking devices on either side of seat KQ-881195

69-74 Seat adjustment pull rod clip This clip attatches pull rod to seat slider locks.

USEDBA-837-199BU-837-199

69-74 Capnut, seat pivot point. Need 2 per seat. Pair. nCX-06-00ZB


To some “repro artists” a quality Vw hub cap is one which only slightly rusts on the ship coming from the Far East.

wheel Area

Accessories

Hub cap Quality varies dramatically. Read closely.56-65 Hub cap Half moon style. The best quality we could find BQ-601-15156-65 Hub cap Half-moon style. Taiwan, as good as most caps.. BD-601-151

66 Hub cap Frizbee style, w/lip to catch wide 5 lug wheel. Decent repro. . S1Q-601-151

67-74 Hub cap Frizbee style. The best quality we could find YQ-601-15167-74 Hub cap Frizbee style, no lip. Decent. YD-601-151

Wheel trim rings (Beauty rings). 56-64

65666768

69-7374

Trim rings NEW.Stainless steel Trim rings. set of 4 very close to OEM Trim rings USED. One year only HTFTrim rings USED. One year only HTF Trim rings USED. One year only HTF. Trim rings USED. One year only HTF.Trim rings Set of 4.Trim ring 8 slots Trim Rings, NOS, set 4, for wide 4 1/2” wheels

ZVw-154-101

ZVw-154-105ZVw-154-106ZVw-154-107ZVw-154-108ZVw-154-109ZVw-154-131

Lug-nut for wheel 56-6656-6667-7467-74

Lug-nut New. 12x1.5. Need 5 per wheel.Lug-nut USED. 12x1.5. Need 5 per wheel.Lug-nut New. 14x1.5. Need 4 per wheel.Lug-nut USED. 14x1.5. Need 4 per wheel.

Bw-601-139BU-601-139

Uw-601-139UU-601-139

56-65 Hub cap spring clip and rivets 5 pak. Rivets to wheel disc. Bw-601-13KAll Hub cap removing tool Using this tool, instead of a screwdriver,

helps keep wheel trim rings in dent-free condition. YQ-012-243

Hub capspring clip

Lug-nut / early

Lug-nut / late

All Weatherstrip adhesive: 3M brand Attaches all types of seals to car doors and trunks. Use it to adhere vinyl trim, headliners, body gas-kets of all types. One 5 oz. tube easily seals both trunks and an assort-ment OR seals both doors OR installs a coupe headliner. Black. AAQ-03M-5BKWire cover panel A molded plastic cover to hide all of your wires in under your hood56-67, white56-67, black68-74, white68-74, black

AC-wHi-5667AC-BLA-5667AC-wHi-6874AC-BLA-6874

Escutcheon tool, removes dash switch escutcheon, early clove box latch nuts, and radio escutcheons with dual pin holes AC-ESC-TooL

81Manuals, Books Literature

Manuals, Books Literature

All 61-65 66-69 70-74

Customer info: No solely Ghia repair/ service manual exists. Most mechanical operations are VW Bug. Any "Bug-Bible" has lots of useful info and useless chaff. We use and recommend, John Muir's "…Idiots…Guide…" and Bentley's, Official VW Service Manuals. In the 66-74 manuals, only 1% covers uniquely Ghia repairs. So, the 300 plus pages of Ghia info in the 61-65 manual is doubly precious.

The chart below estimates the usefulness of the 61-65 VW Workshop Manual for the following Ghia owners.

Year Convertible top Body adjust Chassis Trans/Brakes Engine Electrical Over all56-59 100% 85% 80% 50% 75% 85%

60 100% 100% 85% 90% 80% 95%61-65 100% 100% 100% 100% 100% 100%66-69 100% 90% 85% 50% 25% 85%70-71 50% 65% 50% 50% 15% 50%72-74 50% 40% 50% 40% 10% 40%

1 to 69.5 convertible (plastic window) 2 from 69.5 convertible (glass window)

61-65 VW workshop manual 61-65 (1300 pages) Excellent. This is the service info sent to each dealer concerning 1200 cc, 40 hp Beetles and Ghias. Only manual to contain BODY service and repairs. 1000’s of qual-ity photos. 2 1/2 inches thick. Over 300 pages exclusively devoted to Ghia body information. ASM -616-5BB

Official VW Service Manual Excellent info, intended for dealership mechanics. Often calls for tools home mechanics don’t have. Heavy on mechanical repairs. Out of 500 plus pages, only 4 or 5 deal with Ghia BODY service techniques.

66-6970-74

Service manual The “Blue Book”.Service manual The “Orange Book”.

ASM-666-9LBASM-707-4oR

All “…Complete Idiots Guide” John Muir The best step by step auto repair book ever written. Yep! Even a complete mechanical idiot can re-pair his or her VW using this book. This guides completeness, humor and ease of use spawned a revolution in repair manuals. Now, do-it-yourself manuals aren’t written in technobabble! The first and still the best!(JimP) ASM-iDi-oTS


TMi Products

83TMI Products

Door PanelsGHIA SEDAN & CONVERTIBLE

ColorSelection

ALL COLORS AVAILABLE IN EACH STYLE

Order Example:

18-1513-51-56-61-827

VINYLSmooth Leatherette11-Black 12-Brown13-Tan 14-Beige15-O�-White 16-Grey17-Red 18-Blue20-White 21-Charcoal22-Cream 85-Dk Green88-Chalk 90-Saddle957-Bright Red

Oxen Vinyl81-Black 82-Dk Blue83-Red 84-Tan

TWEED

Tweed Cloth(Not Available for GraphicPanels)70-Black 71-Charcoal72-Lt Grey 73-Sapphire74-Sand

OEM CLASSIC VINYLS

12-Brown 16-Grey23-Brick 24-Water25- Pea 15-O�-White

VELOUR SELECTION

51-Black 52-Brown53-Camel 54-Beige55-Royal 56-Grey57-Red 58-Blue59-Burgundy 60-Lt Blue61-Charcoal 62-Lt Jade64-Blk Cherry65-Dk GreenRegal VelourR1-Blue/NavyR3-Silver/CharcoalR4-Burgundy/BlackR5-Beige/Brown

CARPET

Loop301-Black 310-Brown407-Salt&Pep 602-Blue607-Charcoal 608-Turquoise615-Red 621-Saddle622-Lt Blue 625-Maroon628-OatmealCutpile801-Black 802-Lt Blue810-Brown 815-Red820-Saddle 825-Maroon827-Grey 840-Royal Blue849-Jade 851-Beige852-Silver

CarpetOption

Bottom

TopBackground(Velour)

Two Tone Horizontal PanelsGhia Sedan and Convertible 1956-1974

SPILC LENAPTEKCOP TUOHTIWTEKCOP HTIWPART # PART# DESCRIPTION QUANTITY

yletarapeS dloSsteS lluF14-1524 14-1521 Ghia ‘56-63 Sedan, Full Set; 4pc 5614-1525 14-1522 Ghia ‘64-74 Sedan, Full Set; 4pc 56

Front Only14-1504 14-1501 Ghia ‘56-63 Sedan/Conv., Front Only 4214-1505 14-1502 Ghia ‘64-74 Sedan/Conv., Front Only 42

Ghia Front and RearTwo Tone Horizontal

CobraGhia Sedan and Convertible 1956-1974

PANEL CLIPSYTITNAUQNOITPIRCSED# TRAP

yletarapeS dloSsteS lluF steS lluF18-1513 Ghia ‘56-63 Sedan, Full Set; 4pc 5618-1514 Ghia ‘64-74 Sedan, Full Set; 4pc 56

Front Only 18-1511 Ghia ‘56-63 Sedan/Convertible, Front Only 4218-1512 Ghia ‘64-74 Sedan/Convertible, Front Only 42

BladerunnerGhia Sedan and Convertible 1956-1974Full Sets

18-1523 Ghia ‘56-63 Sedan, Full Set; 4pc 5618-1524 Ghia ‘64-74 Sedan, Full Set; 4pc 56

Front Only18-1521 Ghia ‘56-63 Sedan/Convertible, Front Only 4218-1522 Ghia ‘64-74 Sedan/Convertible, Front Only 42

Cobra Front

Bladerunner Front

ScorpionGhia Sedan and Convertible 1956-1974

PART # DESCRIPTIONFull Sets



PinstripeGhia Sedan and Convertible 1956-1974Full Sets



Scorpion Front

Pinstripe Front

Graphic Panel Construction: Velour background with velour or vinyl graphic only


85TMI Products

Convertible Pad Kits Boots GHIA SEDAN & CONVERTIBLE

Convertible Top Pad KitsGhia Convertible 1956-1974

PART # DESCRIPTION22-141-199A Ghia ‘56 - 69 Complete Pad Kit; Serial #141 431 00722-141-200A Ghia ‘69 1/2 - 74 Complete Pad Kit; Serial #141 431 008

All Pad Kits include 3/4” padding, fabric wrapping, and bow straps... just like the original!

Topcover

Padding HeadlinerA must when replacing VW convertible tops, ourpadding is made from the original VW patterns.

Ghia Padding Kit

Convertible Boots Ghia Convertible 1956-1974

PART # DESCRIPTION22-1627 Ghia ‘56-69 Boot; (Center Crank Mechanism)22-1628 Ghia ‘69 1/2 - 74 Boot; (J Hook Latches)

Ghia Convertible Boot


87TMI Products

Carpet Kits AccessoriesGHIA SEDAN & CONVERTIBLE

Trunk KitsGhia Sedan and Convertible 1956-1974

PART # DESCRIPTION34-T1556 Ghia ‘56-59 Sedan and Conv., Trunk Kit

w/o Tire Cover, 1pc34-T1557 Ghia ‘60-67 Sedan and Conv., Trunk Kit

w/o Tire Cover, 1pc34-T1558 Ghia ‘68-74 Sedan and Conv., Trunk Kit

w/o Tire Cover, 1pc

Tire Covers1954-1979

34-C1149 Fits all 185 x 14 tires Carpet Tire Cover34-C1150 Fits all 165 x 15 tires Carpet Tire Cover34-V1149 Fits all 185 x 14 tires Vinyl Tire Cover34-V1150 Fits all 165 x 15 tires Vinyl Tire Cover

Please determine the correct size of Tire and Rim before ordering

Carpeted Floor MatsGhia Sedan and Convertible 1956-1974 - Full Set

WITH FOOTREST WITHOUT FOOTRESTPART # PART# DESCRIPTION

34-M1523 34-M1524 Ghia ‘56-74 Sedan and Conv; 4pc

NOTE: The metal footrest is removable on the passenger side. Yours may have beenremoved. TMI o�ers carpet kits to accommodate both installations.You can customize your Floor Mat as “Special Order”See color chart on previous page.

Vinyl Tire Cover Carpeted Tire Cover

Floor mats are non-slip with clothbound edges.

COLOR SELECTION701-Black Pile 727-Grey Pile

Carpet AccessoriesPART # DESCRIPTION34-9102 Spray Adhesive; 16 oz. can43-4411 Sisel Padding; 28” x 6 feet

Spray Adhesive

Sisel Padding

Right Hand Drive Carpet KitsGhia Sedan 1956-1974

WITH FOOTRESTPART # DESCRIPTION

Full Front Sets34-F1528 Ghia Sedan ‘56-68; 20pc w/heater grommets34-F1529 Ghia Sedan ‘69-74; 20pc w/o heater grommets

Ghia Convertible 1956-1974Full Front Sets

34-F1628 Ghia Conv., ‘56-68; 20pc w/heater grommets34-F1629 Ghia Conv., ‘69-74; 20pc w/o heater grommets

#34-F1628 Ghia Convertible


89TMI Products

Seat UpholsteryGHIA SEDAN & CONVERTIBLE

ColorSelection

ALL COLORS AVAILABLE IN EACH STYLE

Order Example:

43-1521-01

VINYL

Smooth Leatherette11-Black 12-Brown13-Tan 14-Beige15-O�-White 16-Grey17-Red 18-Blue20-White 21-Charcoal22-Cream 84-Tan85-Dk Green 88-Chalk90-Saddle 957-Bright Red

Basket Weave01-Black 02-Brown03-Tan 04-Beige05-O�-White 06-Grey07-Red 08-Blue95-Saddle

Square Weave09-Black 010-Cream26-Tan 27-Brown86-Chalk

Oxen Vinyl20-White 21-Charcoal81-Black 82-Dk Blue83-Red 84-Tan

TWEED CLOTH

70-Black 71-Charcoal72-Lt Grey 73-Sapphire74-Sand

OEM CLASSIC VINYLS

125-Brown 165-Grey235-Brick 245-Water255- Pea

VELOUR SELECTION

51-Black 52-Brown53-Camel 54-Beige55-Royal 56-Grey57-Red 58-Blue59-Burgundy 60-Lt Blue61-Charcoal 62-Lt Jade64-Blk Cherry 65-Dk GreenRegal VelourR1-Blue/NavyR3-Silver/CharcoalR4-Burgundy/BlackR5-Beige/Brown

Part # ColorTwo-Tone: Add insert color

OEM Classic Style Seat UpholsteryGhia Sedan 1956-1967


43-1521 Ghia ‘56-60 Full Set Sedan43-1522 Ghia ‘61-65 Full Set Sedan43-1523 Ghia ‘66-67 Full Set Sedan

Ghia Convertible 1956-1967Full Sets

43-1621 Ghia ‘56-60 Full Set Convertible43-1622 Ghia ‘61-65 Full Set Convertible43-1623 Ghia ‘66-67 Full Set Convertible

Ghia Sedan and Convertible 1956-1967Front Only

43-1501 Ghia ‘56-60 Front Only43-1502 Ghia ‘61-65 Front Only43-1503 Ghia ‘66-67 Front Only

Features OEM ClassicVinyl with O�-WhitePiping.

12” Insert Original Style Seat UpholsteryGhia Sedan 1956-1974


44-1521 Ghia ‘56-60 Full Set Sedan44-1522 Ghia ‘61-65 Full Set Sedan44-1523 Ghia ‘66-67 Full Set Sedan44-1525 Ghia ‘68 Full Set Sedan44-1526 Ghia ‘69-74 Full Set Sedan

Ghia Convertible 1956-1974Full Sets

44-1621 Ghia ‘56-60 Full Set Convertible44-1622 Ghia ‘61-65 Full Set Convertible44-1623 Ghia ‘66-67 Full Set Convertible44-1625 Ghia ‘68 Full Set Convertible44-1626 Ghia ‘69-74 Full Set Convertible

Ghia Sedan and Convertible 1956-1974Front Only

44-1501 Ghia ‘56-60 Front Only44-1502 Ghia ‘61-65 Front Only44-1503 Ghia ‘66-67 Front Only44-1505 Ghia ‘68 Front Only44-1506 Ghia ‘69-74 Front Only

OEMClassicVinyl

Convertible, 35 1/2”

Sedan 40 3/4”

GH

IA

SEDAN AND

CONV.


91TMI Products


93TMI Products


glossaryB-hld/b-hlder BulbholderBl or Blk BlackCal or Cal-look California look. Without

chromeCh# Chassis numberChrm ChromeConv/convert/vert Convertible (cabriolet).Cpe/sedan Coupe (metal roof ).Deco Decorative. Generally for ap-

pearance not function.Fm From that date on.E or Ex or Excel Excellent quality.Ea or ea Each.Econo Economy (economical).Grmn German.H-lite Headlite.H of G Repro part made by House

of Ghia.H of GJT Repro part made as a joint

effort by House of Ghia and another firm

Kit A number of different parts sharing one purpose.

L or R Left side OR right side.LH or RH Left hand OR right hand.L&R//L and R Left and a distinctly different

right.LHD Left hand drive.Left side Driver’s on LHD.Right side Passenger’s on LHD.Lic. License plate.Lic. lite Refers to entire license lite

unit.NA Not Available.// Likely to stay

that way.NLA No Longer Available.// Once

was common.NYA Not Yet Available.// But,

likely to be reproed.NOS New Old Stock.Parts often

setting on a dealer/ suppli-ers shelf for years.New…never used. Old stock…made long ago.

OE Original Equipment.OEM O E Manufacturer.OG Original, not repro

Pr. Pair.P-lite or P-lite lens Parklite or turnsignal/front.Pak Package of similiar items.Pc. Piece.Pnl Panel, as in door panel.Q or q-??? As in quarter-pnl or quarter-

wndwQual Quality.Replacement The part VW would sell to-

day across parts counter.Repro Reproduction part. Not OEM

made.T-lite or T-lite lens Tail-lite (Always rear).U-do You must finish“U”-shaped In the shape of a U.USA USA market. Not always

found on European market cars.

VG Very good.VW-WW Volkswagen part made by a

plant world wide. Not Ger-man.

Vert Convertible.W-??? Window or wiper//As in win-

dow scraper or wiper shaft.W-shield WindshieldWh or Wht White.X-section Cross-section

Part Number defined:First Letter:K=type 14 Karmann GhiaG=type 34 Karmann Ghia, could be type 3 partB=type 1 bugV=type 1 bug convertibleY=type 4E=Accessory partR=Rabbit (type 17)

Second Letter:A= OEM, NOS partQ= Quality Repro partD= Decent Repro partE= Economy partR=Reconditioned part

House of GhiaSummer 2008 price list

Prices subject to change without notice

KQ-945-295A $19.95 YQ-953-161A $7.00KA-945-227 $125.00 KU-945-295A $5.00 YU-953-161D $10.00KQ-945-227 $55.95 KA-945-296B $29.95 KA-953-161E $125.00KU-945-227 Inquire KU-945-296B $9.00 KA-953-162E $125.00KA-945-227A $125.00 KU-945-175 Inquire KA-953-161C $100.00KQ-945-227A $55.95 KA-945-175A $125.00 KA-953-162C $100.00KU-945-227A Inquire KU-945-175A Inquire KD-953-161C $49.95KA-945-117 $100.00 KA-945-175B $75.00 KD-953-162C $49.95KQ-945-117 TBD KU-945-175B $45.00 KU-953-161C $30.00KU-945-117 Inquire KR-945-175B Inquire KU-953-162C $30.00KA-945-227B $150.00 KU-945-175E $39.00KQ-945-227B $79.00 KR-945-175E $44.95 KA-953-163 inquireKU-945-227B Inquire KU-945-175H $39.00 KU-953-163 $25.00KA-945-227C $200.00 KR-945-175H $54.00 UQ-953-051 $20.00KQ-945-227C $89.00 KA-945-175J $100.00 UU-953-051 $20.00KU-945-227C Inquire KU-945-175J $39.00 UQ-953-052 inquireKA-945-227D $100.00 KR-945-175J $54.00 UU-953-052 $25.00KQ-945-227D $31.50 KA-945-231A $115.00 KQ-953-053B InquireKU-945-227D Inquire KU-945-231A $39.00 KU-953-053B $35.00KA-945-227E $100.00 YA-945-231M $150.00 KQ-953-049 $16.00KQ-945-227E $40.00 YU-945-231M $45.00 KU-953-163A $20.00KU-945-227E Inquire YA-945-231N $125.00 KA-953-053F InquireKA-945-227J $100.00 YU-945-231N $29.00 KU-953-053F $32.16KQ-945-227J $36.50 KU-953-053G $32.00KU-945-227J Inquire UA-953-161 $40.00 KU-953-053S InquireKA-945-227H $119.00 BA-953-161 $40.00 KU-953-051G $75.00KQ-945-227H $41.50 UQ-953-161 $25.00 KU-953-052G $75.00KU-945-227H Inquire BQ-953-161 $6.00 KQ-953-051G $82.00YA-945-223R Inquire UU-953-161 Inquire KQ-953-052G $82.00YQ-945-223R $15.00 BU-953-161 Inquire SOP-03-16SB $2.50YU-945-223R $25.00 KA-953-161A $60.00 SPP-03-16SB $0.99YA-945-223P Inquire KA-953-161B $40.00 SPP-04-20SB $0.95YQ-945-223P $19.00 KQ-953-161A $25.00 SKH-05-25SB $1.95YU-945-223P Inquire KQ-953-161B $27.95 KA-943-121 Inquire

KE-953-161A $10.20 KU-943-121 InquireSOP-04-12SB $1.50 KE-953-161B $5.00 KQ-943-121 $11.98SOP-04-12ZE $2.00 KU-953-161A Inquire KA-943-121A $24.00SPP-04-20SB $3.00 KU-953-161B Inquire KQ-943-121A $11.50SPP-04-72CB $2.00 YA-953-161 $20.00 KU-943-121A $8.00SPP-04-20SB $2.00 YQ-953-161 $6.55 SOP-04-12SB $0.39TPP-55-19ZB $2.00 YU-953-161 $6.00NWX-06-00BB $4.00 YA-953-161A Inquire KA-945-557 $50.00

Page 1

Page 4

Page 3

Page 2

Page 5



KU-945-557 $30.00 KA-941-191 $9.95 KD-827-705 $7.95TFP-48-22ZB $1.05 KQ-941-191 $6.95 PON-15-00PE TBDKU-945-109 $20.00 KD-941-191 $3.95 AVI-32-05ND TBDKU-945-110 $20.00 KQ-943-191 $8.95KQ-945-133 $10.45 KQ-845-125 $23.70 KD-943-191 $7.00KU-945-133 $5.00 KQ-845-121A $99.00 KE-943-191 $5.00KQ-945-131 $35.29 KD-845-121A $62.95KU-945-131 Inquire KQ-845-121C $99.00 KQ-853-651 $80.35SOP-05-20SB $0.95 KD-845-119 $23.50 KQ-853-652 $80.35BU-941-072 $20.00 KU-853-651 InquireBU-941-371 $5.00 KQ-845-525 $19.20 KU-853-652 InquireBU-941-545 Inquire KQ-845-521A $99.00 KA-853-65P $200.00KA-941-125 $15.95 KD-845-521A $33.60 KQ-853-651B NLA

KQ-845-521C $99.00 KQ-853-652B NLAKA-945-177A Inquire KU-85C-30K $150.00 KA-853-651A InquireKQ-945-177A $19.95 KU-85C-35K $150.00 KA-853-652A InquireKU-945-177A $10.00 KA-85A-30K $123.04 KU-853-651B $35.00KQ-945-177B $10.00 KA-85A-35K $123.04 KU-853-652B $35.00KQ-945-177C $8.00 KU-85A-30K $50.00 KU-85M-653 $10.00YQ-945-191 $7.50 KU-85A-35K $50.00 KU-85M-653A $12.00YQ-945-235 $4.00 KU-85C-309 $15.00 KU-85P-653A $5.00YU-945-281A $2.00 KU-85A-309 $10.00 KU-25M-971L $45.00YU-945-283A $2.00 KQ-845-101A Inquire KU-25M-971R $45.00KQ-953-165 $3.00 KQ-845-101C Inquire KU-25M-972L $45.00KQ-953-165A $3.00 KQ-845-102 Inquire KU-25M-972R $45.00KQ-953-165B $9.95 KU-845-501 $60.00 KU-25P-971 $5.00KA-953-165C $89.00 KU-845-501D $100.00KA-953-166C $89.00 KQ-853-601 $140.00KQ-953-165C $35.00 KZ-823-705A $49.50 KU-853-601 InquireKQ-953-166C $35.00 KQ-823-705A $25.00 KU-853-601A InquireKU-953-173 $7.00 KE-823-705A $10.60 KA-853-60K $65.00KQ-953-153 $4.00 KQ-823-499 $7.95 KQ-853-60K $43.95KQ-953-151 $3.95 RQ-823-499 $4.75 KU-853-60K $25.00YQ-953-151 $3.00 KQ-853-657 $4.95 KQ-853-900 $72.45

KD-853-657 $2.30 KU-853-900 InquireKQ-953-131 $5.30 KQ-853-609 $7.99 KA-853-901 $49.00KD-953-131 $3.75 KD-853-609 $4.80 KQ-853-901 $24.95KQ-945-559 $15.20 KQ-823-715 $16.05 KU-853-901 InquireKQ-945-139 $14.95 KD-823-715 $15.30 KQ-853-905 $189.00KQ-945-140 $14.95 KA-951-231 TBD KU-853-905 InquireKU-945-139 $5.00 KQ-951-231 $23.95 GA-853-905 $69.00KU-953-140 $5.00 GQ-853-905 $34.95BQ-941-539 $3.00 KQ-827-705 $8.40 GU-853-905 $45.00

Page 10

Page 7

Page 11

Page 8

Page 12

Page 9

Page 6

Page 13



KU-853-687 $35.00 KU-823-031A $60.00 KQ-827-531W $20.95BA-853-687K $18.95 KU-823-301 $15.00 KQ-827-531B $20.95BU-853-687K $10.00 KU-823-302 $15.00 KQ-827-545R $15.95BA-853-615 $1.55 BHX-08-16SB $3.95 KQ-827-549 $9.95PON-15-00PE $3.05 BHX-08-16ZB $2.95 KQ-827-54WK $39.95PON-30-00PD $3.05 KU-823-331 $6.50 KQ-827-54BK $39.95PON-25-00PG $4.58 KU-823-345 $2.00 KQ-827-54K $6.95

KU-823-47K $10.00 KQ-827-547 $0.75KQ-853-50K $178.00 KQ-823-47K $14.00KQ-853-51K $79.95 YU-823-50K $9.00 KU-943-021 InquireKA-853-52K $149.00 KU-823-48K $12.00 KU-943-021D $10.00KQ-853-52K $179.00 YU-823-507 $5.00 KA-943-193A InquireKQ-853-54P $15.05 CPX-16-16ZB $0.20 KQ-943-193 $17.00KQ-853-54E $0.36 KU-823-509 $30.00 KQ-943-19P $9.79KU-853-547 Inquire YU-823-509D $25.00 KQ-943-20P $7.59

KU-823-509A $12.50 KU-943-117 $25.00KQ-941-175 $68.95 BHX-06-12ZE $1.30 KA-943-117D InquireKU-941-175 $72.80 BHX-06-12ZE $1.30 KU-943-117D $15.00KQ-941-175A $39.50 SPP-06-10ZC $0.75 KU-943-117E $10.00KU-941-175A Inquire VU-823-525 $75.00SOP-04-20SB $2.00 KQ-827-53W $20.95 KU-831-051D InquireSOP-04-20ZB $1.10 KQ-827-53B $17.95 KU-831-052D InquireKU-941-037 $66.50 BQ-823-531G $5.80 KU-831-051F InquireKA-941-041 $50.00 KQ-827-545R $13.95 KU-831-052F InquireKD-941-041 $25.00 KU-831-051G InquireKU-941-041 inquire KU-827-205 Inquire KU-831-052G InquireKQ-941-171 $8.00 KU-827-207 Inquire KU-831-051H InquireKU-941-171 $7.50 KQ-827-209 TBD KU-831-052H Inquire

KQ-827-071 $60.90 KU-831-051J InquireYQ-941-141 $2.15 KU-827-071 $40.00 KU-831-052J InquireYU-941-044 $29.90 KU-827-077 $20.00 KU-831-051K InquireSPP-04-08ZC $1.00 KU-827-078 $20.00 KU-831-052K InquireSPP-04-08ZC $2.15 KD-827-07P $16.50 KU-831-051M InquireKA-809-145 Inquire KQ-827-079 $9.40 KU-831-052M InquireKQ-809-145 $59.95 AV-42-60PC $6.95 KQ-831-077 InquireKQ-941-147 $6.98 KU-827-301 $6.00 KQ-831-078 InquireYQ-941-189 $0.92 KU-827-302 $6.00 KU-831-401 InquireKQ-941-199 $6.98 KW-827-47K $14.00 KU-831-402 InquireYQ-971-907 $0.92 KU-823-47K $10.00 KU-831-411 InquireKQ-941-167 TBD KU-827-503 $30.00 KU-831-412 InquireKU-941-167 $7.00 KU-827-503A $30.00 KR-831-401C $99.00

KU-827-503B $30.00 KR-831-402C $99.00KU-823-031 $75.00 BHX-06-12ZE $0.45 KR-831-411C $99.00

Page 14Page 19

Page 15

Page 20

Page 18

Page 16

Page 17



KR-831-412C $99.00 BQ-83B-231 $5.00KR-831-401D $30.00 YU-837-019 $20.00 YA-837-595 $6.95KR-831-402D $30.00 YU-837-020 $14.50 BA-837-595 $6.95KR-831-411D $35.00 BU-837-019B $10.30 BA-837-231 $2.25KR-831-412D $35.00 BU-837-020B $9.30KQ-831-401D $65.00 BU-837-071 $10.00 KU-837-183 $1.82KQ-831-402D $65.00 YU-837-072 $8.72 BU-837-319 $1.15KQ-831-411D $65.00 BU-837-239B $5.00 BU-837-320 $1.45KQ-831-412D $65.00 BU-837-239 $12.70 RQ-837-18K $8.25SOP-08-20ZH $0.80 YU-837-097 $11.00 KU-837-205 InquireSOP-08-18UH $0.30 YQ-837-097 $11.00 KU-837-205A $35.00

WU-837-239 $7.10 KU-837-205B $45.00YB-831-439 $0.39 WQ-837-241 Inquire KU-837-206 InquireFB-831-439 $0.49 WQ-837-239 $6.00 KU-837-206A $35.00KA-831-72K $99.00 YA-83B-247 $2.50 KU-837-206B $45.00KQ-831-72K $49.95 SFP-05-06ZB $0.80 KU-837-205D $15.00KA-831-73P $59.00 SPP-05-10SB $1.25 KU-837-205E $15.00KQ-831-73P $29.95 KU-837-021 $20.50 BQ-837-205M $19.95KA-831-71P $40.00 KU-837-022 $20.50 BQ-837-20P $39.95KQ-831-71P $24.00 KU-837-193 $9.80 KA-837-213 $8.00KA-831-731C $30.00 KU-837-194 $9.80 SOP-06-12ZE $2.50KA-831-732C $30.00 KU-837-193A $9.80 AQ-837-970 $20.00KQ-831-731C $15.00 YA-837-199 $1.70 KQ-837-24K $6.50KQ-831-732C $15.00 YU-837-199 $0.80 BA-837-21K $6.50KA-831-731A $21.95 KU-837-193B $8.75KA-831-732A $21.95 BW-837-199 $1.70 KQ-837-25K $49.00KQ-831-731A $12.36 BU-837-199 $0.80 KQ-837-253 $13.95KQ-831-732A $12.36 KQ-837-255 $12.95KU-837-015A $55.00 BQ-837-225A $3.75 KA-837-277 $8.00KU-837-015B $60.00 BU-837-225A $8.00 KQ-837-277 $6.25KU-837-015C $125.00 DPG-03-10ZB $0.45 SFP-05-20ZD $1.00KU-837-015E $75.00 BE-837-58W $3.25 KR-837-289 $11.95KU-837-015F $75.00 BE-837-58B $3.25 KU-837-289 $8.00KU-837-015G $75.00 DPG-03-10ZB $1.10 VR-837-289 InquireKU-837-016A $40.00 BQ-837-58C $5.95 VU-837-289 $5.00KU-837-016B $40.00 BQ-837-58D $14.95 TFP-42-16ZD $0.35KU-837-016C $80.00 BQ-837-58H $2.75 KQ-837-295 $25.08KU-837-016E $40.00 SFP-05-10SB $2.54 KQ-837-296 $25.08KU-837-016F $40.00 BQ-837-22P $2.25 KQ-837-290 $33.12KU-837-016G $40.00 BU-837-22P $1.10 KQ-837-291 $15.50SOP-05-12SD $3.00 AQ-837-90K $5.00 KQ-837-295B $54.95SOP-06-12ZE $3.75 BQ-83W-235 $6.55 KQ-837-296B $54.95

BQ-83W-231 $6.55

Page 22

Page 24

Page 21

Page 25

Page 23



KU-845-201B $145.00 KU-847-041A $40.00KU-837-295B inquire KQ-845-201C $105.00 KU-847-042A $36.00KU-837-296B inquire KU-845-201C $50.00 KU-847-041B $78.00SFP-08-35ZB $1.10 KU-845-201D $55.00 KU-847-042B $50.00

KU-845-202 $100.00 KQ-847-37P $46.20KQ-837-475A $9.50 KU-845-202B $145.00 KQ-847-38P $69.95KQ-837-475B $26.95 KQ-845-202C $105.00 KQ-847-339A inquireKQ-837-475C TBD KU-845-202C $50.00 KQ-847-340A inquireKD-837-475C $8.50 KU-845-202D $55.00 KU-847-339A $35.00KU-853-333 $47.00 KR-837-501 inquire KU-847-340A $35.00KU-853-333C $30.00 KR-837-501B inquireKQ-837-471 $102.90 KR-837-501C inquire N 11 365 1 $0.25KU-837-471 Inquire KR-837-501D inquire KQ-845-32P $21.35KQ-837-333D $99.50 KR-837-502 inquire KQ-845-33P $40.65KQ-837-334D $99.50 KR-837-502B inquire KQ-845-31P $79.60KU-837-333D $75.00 KR-837-502C inquire KQ-847-47P $6.95KU-837-334D $75.00 KR-837-502D inquire KQ-853-34P $9.95KE-853-335 $12.05 BA-837-507 $2.00 KQ-847-27P $7.95KQ-853-335A $17.25 SFP-05-10SB $0.35KA-837-479 $18.65 KQ-845-21K $39.95 TOP-35-13SF $0.35KQ-837-487 $0.95 KQ-845-22K $39.95 KQ-847-31K $7.95KQ-837-48K $12.95 KQ-845-23K tdb TFP-35-13ZE $0.35KQ-837-491 $2.82 KD-845-23K $39.95 KU-847-319 $5.25

KQ-845-24K $157.95KQ-143-893 $7.56 KQ-845-211 $79.60 KU-853-36K $40.00KQ-857-219 $5.88 KQ-845-212 $79.60 KU-853-37K $20.00KQ-867-121 $60.25 KQ-845-341 $8.95 KU-853-46K $20.00KQ-867-123 $31.45 KQ-845-341A $7.30 KU-853-47K $40.00KE-857-513 $40.00 KQ-845-341B $9.49 GQ-853-34P $10.29KQ-857-538 $4.95 KQ-845-37P $5.50 TFP-29-95ZG $0.30KU-857-501 $60.00 KZ-85S-37P $66.00 TPP-35-13ZJ $0.35KU-857-502 $60.00 KQ-85S-38P $66.00 KU-847-229 $8.00KQ-857-501B $40.00 KA-853-42P inquire YQ-847-229 $6.95KQ-857-502B $40.00 KU-853-42P $40.00 YU-847-229 $5.00KQ-857-53K $16.50 KU-853-349 $40.00 BQ-847-20K $3.85KU-857-53K $16.50 KU-853-350 $40.00 WLK-04-XXB $0.35KE-857-539 $3.29 KU-853-351 $10.00 KU-847-W81 $45.00KQ-857-539 $2.50 KU-853-352 $10.00 KU-847-W82 $45.00

KU-853-353 $10.00 KU-847-W83 $35.00KU-845-201CV inquire KU-853-354 $10.00 KU-847-W84 $35.00KQ-845-201BCV inquire KU-853-355 $15.00 KU-847-C83 $35.00KU-845-201BCV $166.95 KU-853-356 $15.00 KU-847-C84 $35.00KU-845-202CV inquire KU-853-397 $15.00 YQ-847-245W $9.50KQ-845-202BCV inquire KU-853-398 $15.00 KU-847-245W $8.00KQ-845-202B $166.95 KU-847-245C $7.00KQ-837-497 $18.95 KU-847-041 $77.00 SKH-03-05ZB $1.00KU-845-201 $100.00 KU-847-042 $75.00

Page 29

Page 26

Page 31

Page 27 Page 32

Page 30

Page 28



KQ-867-31W inquireKQ-871-957 $14.95 KQ-867-31B inquire

KQ-871-503 $325.00 KQ-871-959 $13.95 KQ-867-03W inquireKQ-871-504 $325.00 VQ-871-95P $7.95 KQ-867-03B inquireKQ-813-911 $275.00 KQ-871-95P $9.95 BA-857-72P $10.00KQ-871-871 $130.00 KA-845-502 inquire KQ-867-109 $17.00KQ-871-872 $130.00 KQ-845-502 inquire TPP-55-25ZB $0.35KQ-871-KW1 $699.00 KU-845-502 $450.00 KU-867-637 Inquire KQ-871-KW2 $699.00 KE-813-66P $7.95 KQ-853-36P $15.00KQ-871-KW3 $699.00 KQ-871-31K $20.95 KQ-853-369 NLA

KQ-871-315 $5.75 KQ-853-365A $51.50KU-871-511 $275.00 KQ-871-327 $5.75 KQ-853-366A $51.50KQ-871-613 $20.95 KQ-845-521 $18.50 KU-853-365A $51.50KU-871-613 $30.00 KA-871-319 $150.00 KU-853-366A $51.50KU-871-633 $40.00 KQ-871-319 $93.50 KQ-853-365B $16.00KU-871-634 $40.00 KE-871-319 $39.00 KQ-853-366B $16.00KE-871-63P $34.00 KU-853-365B $16.00KQ-871-587 $69.95 KQ-871-317 $15.00 KU-853-366B $16.00KD-871-595 $20.00 KU-871-317 $5.00 KQ-867-307 $24.95NDX-06-00SA $8.00 KU-871-325 $20.00 KD-885-03K NLAKU-871-625 $30.00 KQ-871-313 $11.00 KQ-885-571 $15.29KQ-871-614 $21.00 KU-871-313 $10.00 KU-885-571A $10.00VA-871-383 NLA KU-871-321 $7.00VQ-871-382 $55.25 KU-871-309 $81.95 KE-801-M35 $65.00VU-871-383 $45.00 KU-871-310 $79.00 KE-801-M36 $45.00VQ-871-375 $8.00 BHX-06-16ZD $1.95 KQ-801-035 TBDKQ-871-371 $13.95 KQ-H85-58W NYA KQ-801-036 TBDVQ-871-373 $10.00 KQ-H85-58B $5.50 KQ-801-041 TBDKQ-871-C8P $44.00 KQ-H85-50P $29.95 KQ-801-042 TBDKQ-871-B8P $44.00 KQ-H85-52P $29.95 KQ-801-043 TBDSOP-06-15SC $0.45 KQ-H85-589 $13.50 KQ-801-044 TBDKU-871-691 $100.00 SPP-04-16ZD $0.35 KQ-801-045 TBDKU-871-692 $100.00 AUV-11-625H $7.95 KQ-801-046 TBDKQ-871-691A $82.50 KQ-801-047 $67.50KQ-871-692A $82.50 KQ-871-735 $149.00 KQ-801-048 $67.50KQ-871-507B $16.00 KQ-871-749 $12.85 KQ-801-131 TBD

KQ-871-745 $8.19 KQ-801-132 TBDKQ-871-92P $39.00 KQ-871-829 $12.95 KQ-801-S31 $79.00KD-871-92P $30.95 KQ-871-827 $20.95KQ-871-93K $119.95 KQ-871-855 $23.75 BA-801-177 $4.00KD-871-93K $90.95 KQ-871-825 $8.00 BA-831-499 $5.00KQ-871-90P $15.75 BHX-10-20SF $2.00 UA-831-499 $5.00KQ-871-91K $25.00 KA-857-637B $11.95 KQ-801-203 $30.00TFP-29-16ZJ $0.35 KU-857-637C $10.00 KQ-801-204 $30.00VQ-871-349 $5.80 KA-805-065 InquireKQ-871-609 $11.95 KQ-867-30W KQ-805-065 $495.00KQ-871-605 $8.95 KQ-867-30B KQ-805-06K $195.00

Page 41

Page 34

Page 37

Page 36Page 33

Page 38

Page 35

Page 42

Page 39



KA-809-022D $900.00 KQ-809-172 $58.50KQ-805-06L $99.00 KU-809-021E inquire KQ-809-173 $51.95KQ-805-06R $99.00 KA-809-021F $975.00 KQ-809-174 $51.95KQ-805-069 $43.95 KU-809-022E inquire KE-800-410 $58.95BA-809-131 Inquire KA-809-022F $900.00 KU-800-410 $30.00BQ-809-131 $24.94 KU-809-087 inquire KU-805-905 $40.00BE-809-131 $10.00 KU-809-088 inquire KU-805-905A $25.00KQ-805-073 TBD KU-809-087A inquire KE-201-126 $9.95KQ-805-074 TBD KU-809-088A inquire KQ-201-126A $20.00KU-805-073 $50.00 KU-809-087C inquire BU-809-930 $10.00KU-805-074 $50.00 KU-809-088C inquire BU-809-931 $5.00

KU-809-087D inquire BA-809-930 $29.95KQ-805-077 $74.50 KU-809-088D inquire KA-809-939 $79.00KQ-805-078 $74.50 KU-809-087E inquire KU-809-939 $40.00KQ-805-75P $24.00 KU-809-088E inquire BQ-857-14P $1.95KQ-805-079 $76.50 KQ-809-095 NYA BA-823-461 $5.00KQ-805-080 $76.50 KQ-809-096 NYA BQ-823-461 $5.00KQ-801-081 $39.95 KQ-809-097 $42.00 BHX-05-10ZB $0.25KQ-801-082 $39.95 KQ-809-098 $42.00 SPP-05-10SB $0.25KQ-801-083 $99.00 SPP-04-06SB $0.25KQ-801-084 $99.00 KQ-809-105 $49.95KQ-801-087 $77.00 KQ-809-106 $49.95 KU-813-181A $200.00KQ-801-088 $77.00 KA-809-107B NYA KU-813-181C $125.00KU-805-111B $175.00 KA-809-107C NYA KQ-813-183 $149.00KU-805-111C $100.00 KA-809-108B NYA BA-801-17K $4.00BA-831-44P $5.00 KA-809-108C NYA KQ-813-301 $44.95KQ-805-343 $116.00 KA-809-145 Inquire KU-813-161 $109.00KQ805-344 $116.00 KQ-809-145 $59.95 KU-813-163 $150.00

KE-813-165 $76.00KQ-805-377 $129.00 KQ-809-631 Inquire KU-813-165 $65.00KQ-805-378 $129.00 KQ-809-633 Inquire KU-813-162 $150.00KE-805-37P $60.00 KQ-809-63K Inquire KU-813-166 $75.00KU-805-377 $30.00 KU-809-63K Inquire BE-813-741E $5.50KU-805-378 $30.00 KQ-809-091 $54.50 BQ-813-741G $8.00KQ-805-377A $129.00 KQ-809-092 $54.50 BE-813-705A $5.50KQ-805-378A $129.00 KQ-809-093 Inquire BA-813-705A $21.95KU-805-377A $40.00 KQ-809-094 Inquire BW-813-705D $8.00KU-805-378A $40.00 KE-809-099 $40.00 BA-813-705D $21.95KQ-805-75P $12.95 NYA NYAKU-805-565 $48.00 KQ-809-095 $39.50 NYA NYAKU-805-566 $39.95 KQ-809-096 $39.50 KU-129-645A $25.00KU-805-503 $200.00 KQ-809-097 $52.45 YU-813-503A $30.00KQ-805-583 $39.95 KQ-809-098 $52.45 KQ-813-805K $119.69

KQ-809-071 $47.70 KE-813-805K $49.95KU-809-021B inquire KQ-809-072 $47.70 KQ-813-075 $119.00KA-809-021B $1,000.00 KQ-813-076 $119.00KU-809-022B inquire KQ-809-171 $58.50 BU-701-037 $50.00KU-809-022D inquire

Page 44 Page 47

Page 46Page 49

Page 43

Page 50

Page 45

Page 48



BQ-G07-037 $125.00 KU-707-156F $30.00 KQ-707-38P $9.75BU-701-038 $50.00 KU-707-355D $30.00 KQ-707-18P $6.50BQ-707-038 $125.00 KU-707-356D $30.00 KQ-707-25P $5.50KQ-863-70K Inquire KU-707-153A $45.00 KQ-707-35P $5.50

KU-707-154A $45.00 BQ-707-97K $1.85KQ-701-101 $56.95 KU-707-153B $45.00 BQ-707-98K $1.85KQ-701-102 $56.95 KU-707-154B $45.00 KQ-707-39P $25.00KQ-701-115 $73.50KQ-701-116 $73.50 KQ-707-135 NYA BHX-08-60SB $0.75KQ-701-127 $55.00 KE-707-135 $18.85 BHX-10-20SB $0.45KQ-701-128 $55.00 KQ-707-335A NYA BHX-08-20SB $0.75KQ-701-059 Inquire KQ-707-336A NYA BE-707-19P $1.25KQ-701-060 Inquire KE-707-335A $20.50 BHX-08-55SB $0.50

KE-707-336A $20.50 BHX-08-25SB $0.50CQ-899-123 $4.45 KQ-707-135B $68.00 BHX-08-25SB $0.50CQ-209-189 $3.85 KQ-707-335B $60.40 BHX-08-70SB $0.75YU-899-131 $1.88 KQ-707-137B $19.90 BHX-08-40SB $0.45YQ-899-131 $1.75 KQ-707-138B $19.90 SPP-05-16SB $0.25YU-899-131A $0.74 KQ-707-137E $20.50 BHX-06-16SB $0.45BW-701-259 $2.65 KQ-707-138E $20.50 BHX-08-20SB $0.45BW-899-11K $1.95 KU-707-337 $10.00BW-711-175 $10.45 KU-707-338 $10.00 KQ-797-S1K Inquire YW-711-211 $8.95 KQ-707-233 $15.75 KQ-797-S3K Inquire BW-821-293 $7.65 KQ-707-234 $15.75 BE-707-19P $1.25YW-721-363 $5.95 KU-707-233 $15.00 BHX-08-25SB $0.50YW-721-361 $5.95 KU-707-234 $15.00 KQ-797-S7K Inquire YW-501-191 $2.75 KQ-707-391 $15.75 KE-797-Z8K $4.80UW-611-751 $1.10 KQ-707-392 $15.75 KE-797-Z09 $5.95YE-857-78K $4.00 KU-707-391 $15.00 KE-797-Z09 $5.45BA-701-605 $20.95 KU-707-392 $15.00BQ-701-605 $15.00 KQ-707-121 $15.80 KQ-971-569M InquireBE-701-605 $9.95 KU-707-121 $8.70 Inquire InquireBA-701-535 $6.25 KU-707-177 $60.00 KQ-971-615M $149.00BW-611-71K $1.75 KU-707-179 $30.00 KQ-971-066M $149.00BW-963-335 $6.75 KU-707-180 $30.00 KQ-971-067M $149.00BE-707-571 $6.00 KU-707-383 $75.00 KQ-971-689M $149.00

KU-707-385 $60.00 KQ-971-701M $149.00KQ-707-10K $689.00 KU-707-386 $60.00 KQ-971-723M $159.00KQ-707-30K $609.95 KU-707-385A $40.00 Inquire Inquire

KU-707-386A $40.00KU-707-103 Inquire KQ-971-569C $480.00KU-707-303 Inquire KQ-798-U8K $49.95 Inquire Inquire KQ-707-155 $85.00 KQ-798-E9K $35.00 KQ-971-615C $279.00KQ-707-156 $85.00 KQ-707-24K $5.30 KQ-971-066C $279.00KD-707-155 $65.00 KQ-707-25K $2.15 KQ-971-067C $279.00KD-707-156 $65.00 BQ-707-99P $1.55 KQ-971-689C $279.00KU-707-155F $30.00 KQ-707-18P $6.50 KQ-971-701C $279.00

Page 58

Page 59

Page 54

Page 55

Page 53

Page 52

Page 51

Page 57

Page 60Page 56



KQ-971-723C $305.00 YU-953-513B $45.00 EQ-919-30W $19.95Inquire Inquire BA-953-513C $91.37 EU-919-30W $19.95KQ-971-235 $18.95 BQ-953-513C $43.95 EQ-919-30B $16.50BQ-971-237 $9.95 BU-953-513C $45.00 EU-919-30B $16.50FQ-971-228 $11.95 BQ-953-513F $42.15BW-997-907 $0.95 BU-953-513F $42.50 KA-953-185B $34.95BA-957-397 $2.75 BQ-953-185C $9.50KA-957-397 $3.50 BU-953-225 $39.66 BE-953-185C $8.95EQ-941-006 $10.95 UU-953-227 $27.88 UA-953-215C $6.50Inquire Inquire BQ-953-225 $39.66 UU-953-215C $6.02EQ-737-154 $1.75 UQ-953-227 $39.66 BE-953-227D $3.50EQ-731-129 $1.75 YQ-941-581 $26.95 BQ-953-227D $16.00EQ-718-081 $1.95 YU-941-581 $9.30 ZE-953-227D $9.95EQ-731-129 $1.75 BQ-941-583 $49.95EQ-731-129 $1.75 YU-941-583 $8.62 BU-919-051 $117.00EQ-718-081 $1.75 BQ-941-583B $9.78 BU-919-052 InquireEQ-723-450 $1.95 KQ-951-251 $34.89 BE-919-047 $29.95EQ-717-063 $1.75 KQ-951-253 $7.95 BU-919-047 $27.00EQ-722-799 $1.75 KQ-906-061 $9.45 BA-919-051B $54.95EQ-751-721 $0.95 EQ-9X8-211 $3.75 BU-919-051B $25.00EQ-941-012 $6.45 EQ-916-214 $3.75 BA-919-049 $29.95EQ-941-H12 $18.99 BQ-937-041 $13.50 BU-919-049 $16.00EQ-989-H12 $79.95 BQ-937-205 $19.50 BQ-919-133 $2.35EQ-738-157 $1.95 BQ-937-505 $21.59 BU-919-137 $3.00EQ-717-057 $1.75 BA-937-555 $7.84 Inquire InquireEQ-718-067 $1.75 BA-937-507 $26.84 BW-905-803D InquireEQ-718-067 $1.95 BA-937-577 $5.95 Inquire InquireEQ-732-156 $1.75 BA-937-591 $1.95 BW-905-853 InquireEQ-732-156 $1.75 BE-905-853 InquireEQ-738-157 $1.75 BQ-937-508 $31.95 BQ-905-855 InquireEQ-732-156 $1.95 BA-937-588 $6.45 YQ-905-865A $15.27EQ-717-057 $1.50 BA-937-509 $34.95 BQ-905-865F $19.95EQ-725-418 $1.50 BA-937-599 $4.75 BQ-905-865K $13.45EQ-751-721 $1.50 BA-941-510 $9.42 BQ-905-865L $9.95

BA-941-512 $9.42 BQ-900-275 $2.00KU-953-513B $125.00 BA-941-514 $9.42KU-953-513C $125.00 KU-941-531 $70.00 BQ-947-560 $5.00KU-953-511 $140.00 KQ-941-531A $20.35 BQ-947-560 $5.00KQ-953-517B $64.95 KU-941-531A Inquire BQ-947-561 $6.00KU-953-517B $45.00 YA-941-531A $20.35 BQ-947-565 $3.00KQ-953-517C $54.95 YU-941-531A Inquire TFP-35-13ZB $0.35KU-953-517C $40.00 BA-941-531E $31.35 KU-947-115 $44.70KA-953-517F $175.00 BU-953-231 $12.95 KU-947-125 $39.66KQ-953-517F $54.95 BU-953-232 $14.97 GQ-947-111 $49.00KU-953-517F $40.00 BU-953-233 $14.43 GU-947-111 InquireYA-953-513B $87.50 UA-953-235 $26.84 VQ-947-113 $30.11YQ-953-513B $39.50 UU-953-235 $13.42 VU-947-113 Inquire

Page 64

Page 62

Page 65

Page 63

Page 61Page 66



VQ-947-111 $17.80 BQ-955-265 $3.50 BQ-941-54W $3.25VU-947-111 $10.00 YQ-955-261 $3.00 KQ-541-54V $9.00BQ-941-561 $29.95 UZ-955-41P $3.00 KQ-941-54S $9.00BU-941-561 $17.50 NHX-06-00ZB $0.99 KQ-941-54S $9.00BU-941-561A $9.87 BQ-955-27P $3.10 BU-941-541 $9.00BQ-919-081 $2.95 UQ-955-27P $1.19 KQ-941-5IV $30.00BQ-941-521 $5.75 SA-955-435 $0.99 KQ-941-5SB $30.00BQ-945-515H $3.75 BQ-955-24P $0.40 BU-941-541 $5.00BQ-945-515G $4.50 YQ-955-24P $0.40 YU-943-241 InquireBU-919-233 $15.00 BQ-955-245 $0.50 BU-953-245A $10.00BU-919-233 $15.00 BQ-955-511 $40.00 BU-953-245B $7.00BU-919-233A $15.00 BU-955-515 Inquire BU-953-245G $5.00BU-919-234 $17.50 KA-955-517 $79.95 KU-957-023 $55.00

KU-955-517 $32.58 BU-957-023 $55.00KA-955-425 Inquire KU-955-515A $30.00 KU-957-019 $65.00KQ-955-425 NYA KA-955-517 $78.00 KU-957-020 $60.00KU-955-425 Inquire KU-955-517 $20.00 KU-957-021 $65.00KA-955-425A Inquire KA-955-517A $79.00 YU-957-031C $65.00KQ-955-425A NYA KU-955-517A $20.00 YU-957-033D $65.00KU-955-425A Inquire BA-953-519E $83.00 KQ-957-801C $21.95KA-955-425B Inquire BU-953-519E TBD KE-957-801C $9.95KQ-955-425B $7.95 KQ-998-541W $15.00 BA-957-801H $12.95KU-955-425B $20.00 KQ-998-541S $15.00 BE-957-801H $9.95KA-955-425C Inquire BQ-998-541S $15.00 YA-957-801 $25.00KQ-955-425C $7.95 BU-998-541 C $10.35 WLK-04-XXB $0.25KQ-955-425C $20.00 BQ-998-541B $12.00 BQ-957-861 $1.15KQ-955-429 $6.90 BU-998-541B $8.00

BQ-998-541H $12.00 KR-919-201 InquireKU-955-431 Inquire BU-998-541H $9.00 KR-919-212 InquireKU-955-432 Inquire KU-919-201 InquireKQ-955-411 NYA BZ-955-991 $5.75 KR-919-197 InquireKU-945-407A Inquire BZ-955-993 $4.95 KU-919-197 InquireKU-945-407B Inquire BQ-971-913 $1.95 BQ-957-371 D $14.00KU-945-408B Inquire BQ-971-914 $2.25 BU-957-371D $13.00KQ-945-407B $21.10 BU-955-945 $50.00 BA-957-375 $1.90KU-945-407C $39.00 BA-955-453 $25.00 KU-919-025 $50.00KU-945-408C $39.00 BU-955-453 $25.00 KU-919-029 $75.00KQ-945-407C NYA YU-955-453 $19.50 KU-919-027 $30.00KU-945-407D Inquire BA-955-979 Inquire KU-919-045 $44.50KA-945-408C Inquire YA-955-979 $69.00 KU-919-045A $40.00KQ-945-407D $38.00 KU-955-111D $69.00 KQ-957-099 $14.25

KU-955-113A $75.00 BU-201-073 $100.00KQ-955-217 $26.19 KU-995-113C $75.00 BQ-201-075 $115.00KQ-955-218 $27.49 KU-955-113E $45.00 BU-201-075 $60.00KQ-955-219 $27.49 KU-955-113H $45.00 BQ-201-077 $90.00KQ-955-220 $27.49 BU-201-077 $50.00

BQ-941-54V $9.00 BU-201-551 $35.00

Page 69

Page 71

Page 68

Page 70

Page 67

Page 72



TOP-35-16SB $0.45 BA-857-131 $13.95BU-201-551 $25.00 TOP-42-13SD $0.45 BQ-857-145 $1.95GQ-201-551 $6.00 KU-867-52K $29.50BE-201-552 $5.00 BQ-857-511 $23.00 KU-857-634 $12.00AQ-201-552 $20.00 BQ-857-552 $23.00 KQ-857-63P $9.95BQ-201-553 $11.50 BA-857-56P $5.95 TOP-29-95ZD $2.50BQ-209-147 $8.75 BQ-857-56P $3.75 AQ-86B-635 $33.10KU-201-128 $50.00 BA-857-57P $7.95 AQ-86W-635 $35.45KU-201-129 $30.00 BQ-857-57P $3.14 AQ-86B-636 $35.45KU-201-130 $20.00 TOP-42-19SB $2.20 AQ-86W-636 $35.45KQ-201-219 $18.00 TOP-42-13ZB $2.20 AQ-86B-637 $35.45KQ-201-215 $3.28 INQUIRE Inquire AQ-86W-637 $35.45KQ-201-21K $20.99 BQ-951-531 $41.29 KU-255-651 $25.00KU-201-139 $16.95 BU-951-531 Inquire KU-853-371 $40.00KU-129-615B $24.00 YU-951-531 Inquire KU-853-371A $40.00KU-129-615C $18.00 KE-951-529 $68.56UU-129-617 $9.00 BQ-415-669 $15.39 KQ-88W-585 $7.90UU-129-619 $7.00 KQ-951-971 $24.95 KD-88B-585 $3.50UQ-129-615E $24.00 BQ-951-982 $9.95 KQ-885-587 $6.85UU-129-615E $10.00 BU-951-983 $9.95 KU-855-587 $12.00UU-129-687 $20.00 BQ-951-563 $6.79 KQ-885-561 $7.50UQ-129-627 $25.00 BU-951-563 $2.50 KU-855-561 $8.00UU-129-627 $10.00 KQ-88B-56K $19.95UU-129-611 $65.00 KQ-857-678 inquire KQ-88W-56K $19.95UU-129-613D $52.00 KQ-857-679 $139.95 KU-855-571 $6.00KU-129-613 $52.00 KQ-857-681A $245.00 KU-255-515 $5.00UU-129-607B $53.00 KQ-857-681B inquire KU-255-189 $10.00UU-129-607C $71.00 KQ-857-681C $245.00 KU-255-190 $10.00UU-129-607D $65.00 KQ-857-071 $104.95 KU-819-189 $30.00

KQ-857-082 $104.95 KU-819-190 $30.00KR-857-520 NYA KQ-857-093 $104.95 KU-819-189A $30.00KR-857-521 NYA KQ-857-215 $49.00 KU-819-190A $30.00KR-857-522 NYA KU-857-641 $75.00 KU-819-189B $30.00KR-857-523 NYA KU-857-643 $35.00 KU-819-190B $30.00VA-947-131 $159.00 BU-857-33K $30.00 TPP-35-13ZD $0.35KU-857-520 Inquire GA-857-301 $35.00 BW-881-663E $8.00KU-857-521 $125.00 GU-857-301 $25.00 BU-881-663C $4.95KU-857-522 $175.00 KU-857-301 $20.00 BU-881-663D $4.95KU-857-521A $100.00 BQ-881-251 $3.40KU-857-522A $135.00 KQ-857-101 $20.62 BQ-881-253 $3.40KU-857-523 $75.00 KQ-857-101 $20.62KU-857-527 $100.00 KU-857-101 Inquire KU-881-195 $1.00KU-857-131 $75.00 KU-857-101A Inquire BA-837-199 $1.00KU-857-131A $30.00 KU-857-101B Inquire BU-837-199 $0.50VQ-947-133 $19.89 BA-857-131 $9.49 NCX-06-00ZB $3.95VU-947-133 $10.00 BU-857-131 $6.00 BA-813-741G $10.50TOP-39-13SD $0.35 BA-857-127 $24.00 BE-813-741E $5.20

Page 76

Page 73

Page 75

Page 78

Page 74

Page 77

Page 79



BA-813-705A $12.50BQ-813-705A $7.20BA-813-705D $13.50BQ-813-705D $8.05BA-801-17K $3.95BQ-905-449 $2.00BW-905-451 $3.00BQ-905-451 $4.51YQ-903-795 $3.35BQ-129-P87 $4.95BW-119-585 $6.05BW-119-586 $4.25BW-119-571 $4.50BW-119-491 $2.50YW-115-541 $2.50BQ-129-729B $6.0021Z-100-175 $2.00

BQ-601-151 $79.95BD-601-151 $10.95BU-601-151 $5.00S1D-601-151 $14.25S1U-601-151 $7.00YQ-601-151 $20.95YD-601-151 $13.50YU-601-151 $7.50KQ-154-101 $160.00ZVW-154-101 $50.00ZVW-154-106 $50.00ZVW-154-108 $64.00ZVW-154-131 $56.00BW-601-139 $1.55BU-601-139 $0.70UW-601-139 $1.55UU-601-139 $0.70BW-601-13K $2.49YQ-012-243 $1.75

AM-616-5BBAM-666-9LBAM-707-9ORAM-IDI-OTS

Page 80

Page 81

503-

364-

GHI

A (4

442)

2013

All

cont

ent c

opyw

rited

by

Hou

se o

f Ghi

a

Documents

Hog Catalog Spring 13