Hoisting Equipment Catalogue I 20 April 2016 I 17 MB

HITACHI ELECTRIC CHAIN HOISTS

Hitachi’s reputation for excellence in design, quality, reliability and performance has made this brand a global market

leader. With over three decades of proven reliability throughout Australasia and an extensive operating range, Hitachi

Electric Chain Hoists are suited to most applications. The Hitachi models vary from 250kg to 15 tonne capacity and

are available in three or single phase, two speed or single speed while being tested to the Australian standards.

Features

All Hitachi models are manufactured to comply with AS1418.2.

Operation: fully contactorised with high rated contactors and pendant controls;

both fitted with mechanical interlocks and 24 Volt control.

Optional IP65 pendant including E-Stop available.

Safety Limits: full current and shunt limit switches operate in both directions of

hook travel.

Overload Limiter: this electro-mechanical device is exclusive to the Hitachi

range and boasts a far more superior overload protection device than the

slipping clutch method. Available on all Hitachi models.

Braking: all models are fitted with an electro-magnetic, self-adjusting disc type

brake to the gearbox and the “F” models have an additional auxiliary

centrifugal brake fitted to the motor.

Chain Bucket: noiseless design with flexible mounting.

High quality Grade 80 zinc or nickel plated load chain supplied as standard.

IP54 protection rating on all electric hoists and trolleys.

Motor thermal protection on all Hitachi models.

Optional radio remote control.

Ambient temperature requirement of -10 to 40 degrees.

Class M4 inclusive of 180 starts per hour.

Completely enclosed design. Entire mechanism including; the motor, dual brake system, gears, rotating parts and

electrical system can be operated under severe conditions.

Reverse phase protection relay on all models excluding; 250kg, 500kg and all single phase models.

Special low headroom hoist and trolley arrangements available to suit tight headroom applications.

Electric trolleys are fitted with Guide Rollers as standard to reduce wear and ensure suitability for curved beam

applications.

Specifications

THREE PHASE / SINGLE SPEED HOISTS - 415Volt, 50Hz

THREE PHASE / TWO SPEED HOISTS - 415Volt, 50Hz

SINGLE PHASE / SINGLE SPEED HOISTS - 240Volt, 50Hz

MODEL ¼S ½S 1S 2S 1F 2F 3F 5F

Stock Code HEH010 HEH050 HEH100 HEH200 HEH110 HEH210 HEH300 HEH500

Rated Capacity (kg) 250 500 1000 2000 1000 2000 3000 5000

Speed (m/min) 10 7.2 4.6 2.3 7.1 6.8 4.1 2.8

Motor (kW) 0.45 0.63 0.8 0.8 1.3 2.4 2.4 2.4

Weight (kg) 28 31 37 49 42 80 99 121

Headroom (mm) 450 450 530 645 535 660 820 1020

MODEL ¼SN ½SN 1SN 2SN 2FN 3FN 5FN

Stock Code HEH020 HEH060 HEH120 HEH220 HEH230 HEH330 HEH530

Rated Capacity (kg) 250 500 1000 2000 2000 3000 5000

Speed (m/min) 7.2 / 1.8 7.2 / 1.8 4.6 / 1.2 2.3 / 0.6 6.8 / 1.7 4.0 / 1.0 2.8 / 0.7

Motor (kW) 0.32 / 0.08 0.63 / 0.16 0.8 / 0.2 0.8 / 0.2 2.4 / 0.6 2.4 / 0.6 2.4 / 0.6

Weight (kg) 33 36 42 54 96 112 146

Headroom (mm) 450 450 530 645 660 820 1020

MODEL ¼S1 ½S1 1S1 2S1

Stock Code HEH900 HEH907 HEH911 HEH920

Rated Capacity (kg) 250 500 1000 2000

Speed (m/min) 5 3.6 2.3 1.1

Motor (kW) 0.25 0.32 0.4 0.4

Weight (kg) 34 34 39 51

Headroom (mm) 450 450 530 645

The information shown is to be used as a guide only. Specifications are subject to change without notice. All materials handling or lifting jobs should be assessed individually. Pacific Hoists products are NOT to be used for

lifting or lowering persons.

THREE PHASE / ELECTRIC TROLLEYS - 415Volt, 50Hz

MODEL 1ET 2ET 3ET 5ET

Stock Code HET100 HET200 HET300 HET500


ET Speed (m/min) Single Speed ET 10.5 or 21.0

ETN Speed (m/min) Two Speed ETN 21.0 / 5.3

Motor (kW) 0.14 0.14 0.3 0.3

Weight (kg) 38 52 60 86

Min, Radius (m) 1.5 1.8 2.0 3.0

Girder Width (mm) * 75 – 125 100 - 150 100 - 150 125 - 175

* Larger girder widths are available upon request.

Dimensions (in mm)

HITACHI S SERIES HOISTS

MODEL ¼S ¼SN ½S ½SN 1S 1SN 2S 2SN ¼S1 ½S1 1S1 2S1

Z 450 450 450 450 530 530 645 645 450 450 530 645

A 181 183 181 183 216 216 216 216 181 181 246 246

B 184 210 184 210 216 246 216 246 210 210 246 246

C 125 125 125 125 135 135 90 90 125 125 135 90

D 165 185 165 185 170 170 215 215 165 165 170 215

E 620 620 620 620 680 680 705 705 620 620 680 705

G 19 19 19 19 23 23 26 26 19 19 23 26



HITACHI F SERIES HOISTS

HITACHI ET SERIES TROLLEYS

MODEL 1F 2F 2FN 3F 3FN 5F 5FN

Z 535 660 660 820 820 1020 1020

A 250 280 280 280 280 280 280

B 250 280 330 280 330 280 330

C 135 175 175 120 120 145 145

D 170 170 170 245 245 330 330

E 680 845 845 1090 1090 1295 1295

G 23 26 26 42 42 48 48



MODEL 1ET 2ET 3ET 5ET

B1 185 210 210 240

B2 190 210 210 240

D 64 75 75 90

d 27 32 37 46

F 303 313 316 323

H 226 245 265 322

K 136 130 140 177

T 65 80 80 90

U 55 40 37.5 54

V 159 172 175 181

L 182 200 203 219

W 120 148 148 173

E 133 169 168 202



PACIFIC ELECTRIC CHAIN HOISTS

The Pacific Electric Chain Hoists offer a great balance between quality and price. The models vary from

250kg to 2 tonne capacity and are all tested to the Australian standards. All hoists are inclusive of many

features which makes them suited for most applications. Optional Motorised Trolleys are available to

complete the package.

Features

All Pacific models are manufactured to comply with AS1418.2.

IP65 pendant with 24 volt control for operator safety.

Overload protection clutch prevents damage caused by

overloading.

Inclusive of DC Brake which automatically engages in the event of

a power failure.

Completely enclosed design to withstand harsh conditions.

Upper and lower electrical limit switches.

Grade 80 zinc plated load chain supplied as standard.

Motor thermal protection on all Pacific Electric Chain Hoists.

Fuse protection provided for both primary and secondary control

circuits.

IP54 protection rating on all electric hoists and trolleys.

Reverse phase protection relay on all models excluding 250kg.

Optional radio remote control.

Specifications

Pacific Electric Chain Hoists - 415Volt, 50Hz

Motorised Trolleys - 415Volt, 50Hz

*Standard beam sizes available up to 300mm width. Larger sizes available upon request.

Dimensions (in mm)

Pacific Electric Chain Hoists

MODEL PEH025 PEH050 PEH100 PEH200

Stock Code PEH025 PEH050 PEH100 PEH200


Standard Lift Height (m) 3 3 3 3

Chain Dimension (mm) 4 x 12 6.3 x 19.1 7.1 x 20.2 7.1 x 20.2

Speed (m/min) 12 / 3 10 / 2.5 8 / 2 4 / 1

Motor (kW) 0.6 / 0.15 1.1 / 0.28 1.5 / 0.37 1.5 / 0.37

E.D. Rating (%) 40 / 20 40 / 20 40 / 20 40 / 20

Load Chain Fall No. 1 1 1 2

Weight (kg) 30 42 57 62

MODEL PET050 PET100 PET200 PET055 PET105 PET205

Stock Code PET050 PET100 PET200 PET055 PET105 PET205

Rated Capacity (kg) 500 1000 2000 500 1000 2000

Speed (m/min) 10 10 10 20 / 5 20 / 5 20 / 5

Motor (kW) 0.12 0.18 0.37 0.12 / 0.03 0.18 / 0.04 0.37 / 0.09



Pacific Electric Chain Hoists plus Trolley

MODEL PEH025 PEH050 PEH100 PEH200

A 380 468 487 487

B 175 221 240 240

C 205 247 248 248

D 135 156 170 170

E 299 366 398 398

F 143 186 188 188

G 156 180 210 210

H 376 485 520 592

MODEL PEH025 +

PET055

PEH050 +

PET050

PEH100 +

PET105

PEH200 +

PET205

A 382 382 382 392

B 125.5 125.5 125.5 159

C 324 324 324 357

D 180 180 180 183

E 75 - 125 75 - 125 75 - 125 100 – 150

H 385 483 510 582



PACIFIC PORTA HOISTS

The Pacific Porta Hoists are compact, lightweight 240 volt single phase electric chain hoists. They

conveniently come in a durable travel case which makes them the ideal portable solution for lifting,

lowering and handling loads up to 500kg. All models are tested to the Australian standards.

Features

All Pacific Porta Hoists are manufactured to comply with AS1418.2.

All models suitable for 240 volt, 50 Hz single phase power supply.

Available in 80kg, 125kg, 250kg and 500kg capacities.

Duty cycle rated at 30% ED with 180 starts per hour

18 volt DC low voltage control for safe operation.

IP65 pendant control, dual speeds with variable speed slow control for

raise and lower.

Overload protection clutch prevents damage caused by overloading.

All models are supplied as standard with 6 metre height of lift, a 5 metre

pendant control, chain bucket and 3 metre power supply cable.

Upper and lower electrical limit switches.

Supplied with durable travel case.

Specifications

*Additional height of lift is available upon request. Please note that this may vary the size and weight of the hoist and therefore may not fit into the travel case.

Dimensions (in mm)

MODEL PPH080 PPH125 PPH240 PPH500

Stock Code PPH080 PPH125 PPH240 PPH500


Standard Lift Height (m) 6 6 6 6

Pendant Length (m) 5 5 5 5

Power Supply 50Hz (volt) 240 240 240 240

Chain Dimension (mm) 4.0 x 12 4.0 x 12 4.0 x 12 4.0 x 12

Motor Power (kW) 0.3 0.3 0.6 0.6

Speed (m/min) 0 - 4.8 (variable) /

18

0 - 3.2 (variable) /

12.5


12.5


6.3

IP Rating 54 54 54 54

E.D. Rating (%) 30 30 30 30

Load Chain Fall No. 1 1 1 2

Weight (kg) 17.5 17.5 17.5 20.6



MODEL PPH080 PPH125 PPH240 PPH500

A 364 364 364 364

B 182 182 182 182

C 182 182 182 182

D 89 89 89 89

E 423 423 423 423

F 6m lift 6m lift 6m lift 6m lift

G 25 25 25 25

H 25 25 25 25

I 260 260 260 260

J 108 108 108 84

K 152 152 152 176

L 400 400 400 494



PACIFIC ELECTRIC WIRE ROPE HOISTS

The Pacific Electric Wire Rope Hoists are suited for a wide range of applications such as warehouses,

construction sites and factories. Due to its compact and lightweight design, it is perfect for when easy

installation and quick use is needed.

Features

Automatic upper limit switch; when rope disc touches the limit arm,

hoisting is automatically stopped.

Dynamic and mechanical brake providing instant and safe braking.

Convenient 240V / single phase power supply.

Sensor arm automatically activates lower limit switch to stop motor

if rope is under wound.

Supplied with 3m power lead and industry plug & 10m heavy duty

IP65 waterproof pendant control.

Wire rope with 360º weighted hook with safety latch.

Optional push trolley mount CRH0720

Optional mounting arm CRH0710 (not available for CWS300).

Specifications

Optional Attachments

Dimensions (in mm)

MODEL CWS80 CWS160 CWS230 CWS300

Stock Code CWS080 CWS160 CWS230 CWS300


Speed (m/min / 50Hz) 30 22 14 13

Motor Output (kW) 0.8 1.2 1.3 1.5

Power Supply 240V 1Ø 50Hz

Max. Height of Lift (m) 35 40 24 24

Wire Rope Dimension (Ø mmxm) 3.3 x 36 4.0 x 41 5.0 x 25 4.8 x 25

Net Weight (kg) 18 25 26 28

MODEL CRH0710 CRH0720 CRH0720A

Stock Code CRH071 666110 666111

Description Swivel arm assembly

Trolley mount bracket to fit

hoist to PPT105 push trolley.

Suitable for CWS80

Trolley mount bracket to fit

hoist to PPT105 push trolley.

Suitable for CWS160 /

CWS230 / CWS300



Dimensions

MODEL CWS80 CWS160 CWS230 CWS300

A 200 244 244 244

B 168 182 182 182

C Ø65 Ø60 Ø60 Ø60

D 605 640 640 640

E 879 879 879 879



JDN AIR HOISTS

J.D. Neuhaus manufactures high quality, superior PROFI Air Hoists which are known for their robust

designs. This makes their products suitable for tough industrial applications, even in continuous working

processes. Safety features, as 100% duty rating and explosion protecting, are an important advantage

for applications in hazardous areas.

Features

Manufactured in Germany, under strict quality control with demanding tolerances.

All JDN models are manufactured to comply with AS1418.2.

Patented pre-lube motor design for low maintenance, oil-free operation.

100% duty rating and unlimited duty cycle suits all environmental conditions.

Only six atmospheres of compressed air required.

Insensitive to dust, humidity and temperatures ranging from -20 °C up to + 70 °C.

ATEX–approved models available, suitable for application in dangerous and

explosive environments

Self-cooling economic air motor which will not overheat.

Fail-safe brake, in case of air supply failure.

From 1 tonne upwards available with overload protection.

Low decibel rating.

F-type sensitive infinitely variable speed control for the precise positioning of

loads.

Cord control or Brass Pendant control available, as well as an electro pneumatic

interface for Radio Remote control as an option.

Easy operation and low maintenance design.

Specifications

*PROFI range available up to 100 tonne.

**Chain buckets, longer lift heights and alternative controllers available at additional cost.

***Weight and headroom based on PROFI standard model with rope control and no chain bucket.

Model 0.25Ti 0.5Ti 1Ti 1.5Ti 2Ti 3Ti

Stock Code JDN705 JDN706 JDN715 JDN719 JDN725 JDN735

Rated Capacity (tonne) 0.25 0.5 1 1.6 2 3.2

Weight with standard 3m lift (m) 27 27 28 56 34 86

No. of chain strands 1 1 1 1 2 1

Motor Power (kW) 1.0 1.0 1.0 1.3 – 2 1.0 3.5

Chain Dimension (mm) 7 x 21 7 x 21 7 x 21 9 x 27 7 x 21 13 x 36

Air Pressure (bar) 6 6 6 4 - 6 6 6

Air Consumption at full load (m³/min)

Lifting

Lowering

1.2

1.5

1.2

1.5

1.2

1.5

1.5–2.6

2.2–3.6

1.2

1.5

4

5.5

Air Connection G½ G½ G½ G¾ G½ G¾

Lifting speed at full load (m/min) 20 11 5.5 4 – 6 2.7 5

Lowering speed at full load (m/min) 38 17 11 11 – 12 5.5 10.8

Model 3Ti/2 6Ti 10Ti 16Ti 20Ti

Stock Code JDN732 JDN765 JDN775 JDN785 JDN795

Rated Capacity (tonne) 3.2 6.3 10 16 20

Weight with standard 3m lift (m) 66 110 156 240 285

No. of chain strands 2 2 2 3 4

Motor Power (kW) 1.3 – 2 3.5 3.5 3.5 3.5

Chain Dimension (mm) 9 x 27 13 x 36 16 x 45 16 x 45 16 x 45

Air Pressure (bar) 4 – 6 6 6 6 6


Lifting

Lowering

1.5–2.6

2.2–3.6

4

5.5

4

5.5

4

5.5

4

5.5

Air Connection G¾ G¾ G¾ G¾ G¾

Lifting speed at full load (m/min) 2 – 3 2.5 1.6 1 0.7

Lowering speed at full load (m/min) 5.5 – 6 5.4 3.4 2.1 1.6



Dimensions (in mm)

¹Chain buckets increase the hoist headroom

Model 0.25Ti 0.5Ti 1Ti 1.5Ti 2Ti 3Ti 3Ti/2 6Ti 10Ti 16Ti 20Ti

A (min. headroom¹) 450 450 450 480 498 593 544 674 813 898 1030

B 288 288 288 293 336 373 356 454 548 598 670

C 145 145 145 200 145 233 200 233 308 382 382

D 297 297 297 412 297 483 412 483 575 692 692

E1 28 28 28 28 28 40 28 40 44 53 75

E2 28 28 28 26 28 30 28 40 44 53 75

F (up to hook centre) 137 137 137 170 137 187 140 154 197 199 180

G (max. width) 176 176 176 215 183 233 215 233 306 308 315



JDN MINI AIR HOISTS

The JDN Mini Series widens the range of applications in the light duty sector as a handy, flexible and

light-weight hoist. The optional Mini Manipulator can be used to lift, lower, traverse and position loads in

an easy, manual manner. The carrying capacities vary from 125kg to 980kg, with the 125kg model and

the 250kg available with optional travel case.

Features



Patented pre-lube motor design for low maintenance, oil-free operation.


Only six atmospheres of compressed air required.

Insensitive to dust, humidity and temperatures ranging from -20 °C up to + 70 °C.

ATEX–approved models available, suitable for application in dangerous and explosive environments.

Also suitable for horizontal pulling.

Self-cooling economic air motor which will not overheat.


Wear resistant motor braking system.

Extremely sensitive lever control with emergency shut-off valve; maximum control length is 6 metres.

Price competitive alternative when compared to other types of powered hoists.


Lightweight for easy handling.

Specifications

* Custom lift heights available. Weight and headroom based on mini standard model with pendant control and chain bucket. ** Pneumatic trolleys and cord controls not available for this range.

Dimensions (in mm)

Model MINI125 MINI250 MINI500 MINI1000

Stock Code JDN123 JDN253 JDN503 JDN603


Weight with standard 3m lift (kg) 9.5 10.5 21 23

No. of chain strands 1 1 1 1

Motor Output (kW) 0.4 0.4 1 1

Chain Dimension (mm) 4 x 12 4 x 12 7 x 21 7 x 21

Air Pressure (bar) 6 6 6 6


Lifting

Lowering

0.5

0.7

0.5

0.7

1.2

1.6

1.2

1.6

Air Connection G⅜ G⅜ G½ G½

Lifting speed at full load (m/min) 15 8 10 5

Lowering speed at full load (m/min) 30 16 18 10

Model MINI125 MINI250 MINI500 MINI1000

A 328 328 458 458

B 232 232 316 316

C 367 367 505 505

D 92 92 122 122

E 213 213 292 292

F 109 109 148 148

G 104 104 144 144

H 177 177 234 234

J 148 148 194 194

K 83 83 119 119

L 29 29 40 40

M 19 19 28 28



JDN MINING AIR HOISTS

The JDN M-series are specifically designed for underground mining operations where loads can be lifted, lowered and horizontally pulled. Due to their versatility, they are also suitable for many different industrial applications. The M-series have the same features as the JDN PROFI-series, however; they operate with an air pressure of only 4 bar.

Features

Manufactured in Germany, under strict quality control with

demanding tolerances.


Patented pre-lube motor design for low maintenance, oil-free

operation.

100% duty rating and unlimited duty cycle suits all environmental

conditions.

Insensitive to dust, humidity and temperatures ranging from -20

°C up to + 70 °C.

ATEX–approved models available, suitable for application in

dangerous and explosive environments


Cast iron housing suitable for severe conditions.


Two chain falls for operation in both directions.

Specially designed for horizontal and vertical moving of loads.

Specifications

* Custom lift heights available. Weight based on standard model. Lifting speed at 2m length of control. Longer control hoses decrease the lifting speeds.

Dimensions (in mm)

Model M64 M63D

Stock Code JDN991 JDN990

Rated Capacity (tonne) 1 - 2 3 - 6

Weight with standard 3m lift (kg) 60 100

No. of chain strands 1 - 2 1 - 2

Motor Output (kW) 0.77 1.3

Chain Dimension (mm) 9 x 27 13 x 36

Air Pressure (bar) 4 4


Lifting

Lowering

1.0

2.0

2.2

3.2

Air Connection Rd 32 x ⅛” Rd 32 x ⅛”

Lifting speed at full load (m/min) 3 – 1.5 2.2 – 1.1

Lowering speed at full load (m/min) 12.5 – 6.5 6 - 3

Model M64 M63D

A1 (smallest headroom with 1/1 chain strands) 603 750

A2 (smallest headroom with 1/2 chain strands) 660 870

B1 (with 1/1 chain strands) 313 370

B2 (with 1/2 chain strands) 370 490

C 175 237

D 375 507

E1 (Hook opening) 30 40



F (maximum width) 144 195



JDN SUBSEA HOISTS

J.D. Neuhaus have been writing hoist technology history for over 260 years through consistent product

innovations. Today, JDN air hoists are used in more than 70 different industries in over 90 different

countries. That the expertise of JDN goes beyond the border is proven by their latest technology in

SubSea hoisting, of which the world launch was hosted in Australia. The new JDN PROFI SubSea

series are developed to be used in complex underwater lifting operations; using variable speed control

and overload protection with an operating depth of up to 70m in water. JDN offer air and hydraulic

options, in capacities of 3 to 6 tonnes.

Features

Manufactured in Germany, under strict quality control

with demanding tolerances.

All JDN models comply with AS1418.2.

Available with air or hydraulic operation.

Variable speed control.

Supplied with overload protection.

Design for water operating depth of up to 70m.

For both horizontal and oblique use.

Specifications

Dimensions (in mm)

Model 3TI - SUBSEA 6TI - SUBSEA

Stock Code JDN737 JDN767

Rated Capacity (tonne) 3.2 6.3

Weight with standard 3m lift (kg) 150 161.5

Motor Output (kW) 3 3

Chain Dimension (mm) 13 x 36 13 x 36

No. of Chain Strands 1 2

Air Pressure (bar) 6 6


Lifting

Lowering

4

5.5

4

5.5

Air Connection G1 G1

Lifting speed at full load (m/min) 2.3 1.2

Lowering speed at full load (m/min) 5.4 2.7

Length of Control at standard lift (m) 2 2

Max. water depth (m) 55² 55²

Model 3TI - SUBSEA 6TI - SUBSEA

A 593 674

B 373 454

C1 300 300

C2 455 455

D 755 755

E1 40 40

E2 30 40

F 187 154

G 233 233



JDN HYDRAULIC MONORAIL HOISTS

The JDN Hydraulic Monorail Hoists can be deployed as an alternative to air driven units in all situations

where hydraulic lines, central hydraulic systems or hydraulic power supplies exist. The carrying

capacities vary from 3 tonne up to 100 tonne and depending on the motor size; these hoists work with an

intake pressure of 100 bar up to 180 bar.

Features

Manufactured in Germany, under strict quality control with

demanding tolerances.

All JDN models are manufactured to comply with

AS1418.2.

Ideal for applications in explosion risk areas.

Sensitive, infinitely variable speed control of lifting /

lowering and travelling motions.

Extremely low noise emissions

Fully enclosed highly robust gear motor.

Integrated overload protection.

Only two supply connections at hoist “P” and “T”, leakage

oil drained internally.

Controlled load-lowering up to 20 tonne carrying capacities

in the event of oil supply failure.

Specifications

JDN Hydraulic PROFI Hoists (available up to 100 tonne)

Model 3 TI-H 6 TI-H 10 TI-H 16 TI-H 20 TI-H

Stock Code - - - - -

Rated Capacity (tonne) 3.2 6.3 10 16 20


Motor Type KM 1/16 KM 1/16 KM 1/16 KM 1/16 KM 1/16

Motor Power (kW) 3.5 3.5 3.5 3.5 3.5

Intake Pressure (bar) 130 130 130 130 130

Intake Volume (l/min) 48 48 48 48 48

Lifting speed at full load (m/min) 4.0 2.0 1.7 1.1 0.8

Lowering speed at full load (m/min) 4.5 2.3 2.1 1.5 1.0

Weight with standard lift height (kg) 90 114 160 244 289


Weight of chain (kg/m) 3.8 3.8 5.8 5.8 5.8

Standard Lift (m) 3 3 3 3 3

Length of control as standard lift (m) 2 2 2 2 2

JDN Hydraulic Monorail Hoists

Model EH 20-H EH 25-H EH 37-H EH 50-H EH 75-H EH 100-H

Stock Code JDN810 - - JDN850 - -

Rated Capacity (tonne) 20 25 37.5 50 75 100

No. of chain strands 4 2 3 4 3 4

Motor Type – Trolley KM 1/16 KM 1/16 KM 1/16 KM 1/16 KM 1/16 KM 1/16

Motor Type – Hoist KM 1/8 – KM 1/16 KM 2/32 KM 2/32 KM 2/32 KM 2/32 KM 2/32

Motor Output – Trolley (kW) 0.7 1.4 1.4 1.4 2.8 2.8

Motor Output – Hoist (kW) 3.5 6 6 6 10 10

Intake Pressure (bar) 160 / 100 150 150 150 180 180

Lifting speed at full load (m/min) 0.8 1.1 0.7 0.5 0.7 0.55

Lowering speed at full load (m/min) 0.9 1.2 0.8 0.6 0.8 0.6

Travelling Speed 12 12 12 12 12 12

Connection G½ G¾ G¾ G¾ G¾ G¾

Hose Dimension DN 12 DN 16 DN 16 DN 16 DN 16 DN 16

Weight with standard lift height (kg) 720 1050 1550 1880 4100 5800

Chain Dimension (mm) 16 x 45 23.5 x 66 23.5 x 66 23.5 x 66 32 x 90 32 x 90

Weight of chain (kg/m) 5.8 12.2 12.2 12.2 21.3 21.3

Standard Lift (m) 3 3 3 3 3 3



Dimensions (in mm)

JDN Hydraulic PROFI Hoists


Model 3 TI-H 6 TI-H 10 TI-H 16 TI-H 20 TI-H

A (smallest headroom¹) 593 674 813 898 1030

B 373 454 548 598 670

C 233 233 308 382 382

D 578 578 670 787 787

E1 40 40 44 53 75

E2 30 40 44 53 75

F 187 154 197 199 180



Dimensions continued (in mm)

JDN Hydraulic Monorail Hoists


Model EH 20-H EH 25-H EH 37-H EH 50-H EH 75-H EH 100-H

A 130 146 146 125 100 125

B 68 70 70 68 68 68

C 267 257 267 272 267 272

D 35 25 25 40 35 40

E 220 198 220 283 220 283

F¹ 820 998 1070 1150 1480 1535

G 200 170 190 420 286 575

H 75 75 100 100 120 120

J 266 350 455 340 740 470

K 600 1185 1730 1680 3210 3130

L 367 377 377 462 640 762

M 420 562 562 687 670 765



JDN BIG BAG HANDLING AIR HOISTS

For Big Bag Handling JDN offers innovative design solutions to meet the special requirements for these

applications. These Air Hoists are available in capacities of 1100kg and 2200kg with an air pressure of 6

bar and are supplied with one or two load hooks. One load hook for standard cross lifting beam design.

The extended distance between the hook and the chain box is particularly advantageous since this

guarantees no risk of collision between the load and the chain box. The twin loads hooks are suited for

more complex multipoint cross beam designs or for standard lifting beam designs with two suspension

points.

Features



Particularly suited for use as big bag handling hoist and for the movements of bulky loads due to the low headroom design.

Compact and modern design.

Suitable for use as a synchronized hoist in twin-hook design.

The use of JDN standard components guarantees reliable operation and cost effective manufacture.

No additional motor lubrication required.

Small number of maintenance / wear free moving parts.

Chain box included as standard.

Suitable for a wide variety of beam sizes / profiles, with hook centres to suit your requirements.


Suitable for use as standard in areas at risk of explosion with ATEX–approved models available, for application in dangerous and explosive environments

Specifications

Model BBH 1000-1 BBH 2000-1 BBH 1000-2 BBH 2000-2

Stock Code JDN900 - - -\

No. of hooks 1 1 2 2

Air Pressure (bar) 6 6 6 6

Rated Capacity (tonne) 1.1 2.2 1.1 2.2

No. of chain strands 1 2 2 4

Motor Output – Hoist (kW) 0.7 0.7 0.7 0.7

Motor Output – Trolley (kW) 0.2 0.2 0.2 0.2

Lifting speed at full load (m/min) 3.7 1.7 3.7 1.7

Lowering speed at full load (m/min) 10 5 10 5

Air consumption at full load (m³/min) 1.4 1.4 1.4 1.4

Weight with standard lift and

minimum k dimension (kg) 130 137 137 149

Chain Dimension (mm) 7 x 21 7 x 21 7 x 21 7 x 21

Weight of 1m chain (kg) 1 1 1 1

Standard Lift (m) 3 3 3 3

Length of control at standard load (m) 2 2 2 2

Noise level at full load (dB (A)) 76 76 76 76



Dimensions (in mm)

Model BBH 1000-1 BBH 2000-1 BBH 1000-2 BBH 2000-2

A 332 332 332 332

B 163 / 220 163 / 220 163 / 220 163 / 220

b min. 90 90 90 90

b max. 310 310 310 310

C 182 182 182 182

E 195 195 373 346

F 195 195 95 95

G 195 195 159 159

H 388 438 388 438

J 192 220 192 220

K min. 435 410 260 260

K max. 1100 1100 1300 1300

L - - 175 150

M 28 28 28 28

N 250 250 250 250

P 70 70 70 70

R 116 116 116 116

t max. 30 30 30 30



JDN ULTRA LOW MONORAIL HOISTS

The JDN Ultra Low Monorail Hoist provides the ideal solution when loads have to be lifted and

transported in extremely reduced spaces. As an example; the model with a 6 tonne load capacity

features a headroom of only 230mm. The carrying capacity of these models vary from 4 tonne up to 100

tonne, with an air pressure of 6 bar.

Features

Manufactured in Germany, under strict

quality control with demanding tolerances.

All JDN models are manufactured to comply

with AS1418.2.

Ideal for applications in explosion risk areas.

Insensitive to dust, humidity and temperatures

ranging from -20 °C up to + 70 °C.

Extremely low headroom.

Low air consumption.

Available with increased spark protection.

Specifications

*Capacities up to 100 tonne available on request

Model UH 4 UH 6 UH 8 UH 12 UH 16

Stock Code - JDN806 JDN808 JDN999 -

Rated Capacity (tonne) 4 6 8 12 16


Air Pressure (bar) 6 6 6 6 6

Motor Output (kW) 2.5 2.5 2.5 2.5 2.5

Lifting speed at full load (m/min) 3.0 2.0 1.4 0.9 0.65

Lowering speed at full load (m/min) 7.5 5.2 3.6 2.5 1.5

Air consumption at full load (m³/min) 4.0 4.0 4.0 4.0 4.0

Weight with standard lift and control

length (kg) 460 470 540 550 560


Weight of 1m chain (kg) 3.8 3.8 3.8 3.8 3.8


Length of control at standard load (m) 2 2 2 2 2

Noise level at full load lifting (dB (A)) 78 78 78 78 78

Noise level at full load lowering (dB (A)) 80 80 80 80 80



Dimensions (in mm)

Model UH 4 UH 6 UH 8 UH 12 UH 16

A 195 305 195 305 305

B 200 200 200 200 200

C 284 284 284 284 284

D 165 165 165 165 165

E 236 236 236 236 236

F 330 330 283 283 283

G 197.5 197.5 197.5 197.5 197.5

H min. 150 ≤ b ≤ 310 230 230 - - -

H min. 150 ≤ b ≤ 230 - - 295 295 334

H min. 230 ≤ b ≤ 310 - - 276 276 315

J 400 400 400 400 400

K 535 535 535 535 535

L 1000 1000 1000 1000 1000

M 40 40 44 44 53

N 51 51 66 66 82



JDN TROLLEYS

JDN Trolleys are available for both the PROFI and Mining Air Hoists as a manual option (LN) for pushing

or pulling by hand. Geared trolleys (LH) are also available for load movement by operating the hand

chain mechanism and JDN also offers a motorised trolley (LM) which is powered by an air motor. The

carrying capacities go up to 20 tonne.

Features


All JDN trolleys are manufactured to comply with AS1418.2.

Easy to install.

Fitted with Anti-climb and anti-drop devices as standard.

Robust manufacture requiring little maintenance.

Able to negotiate curves.

Rack and pinion drive and spark resistance package available as options.

Four coat epoxy paint finish available for offshore protection.

The air supply can be fed by various systems; energy chain, c-rail, square rail, spiral hose or hose

trolleys.

JDN LN Manual Trolley JDN LH Geared Trolley JDN LM Motorised Trolley

Specifications


Stock Code - JDN925 JDN925 - JDN925 JDN931 - JDN960 JDN970 JDN970 JDN970

Rated Capacity – LN Trolley (tonne) 0.5 0.5 1 2 2 3.2 3.2 6.3 10–16 10–16 -

Rated Capacity – LH & LM Trolley (tonne) 2 2 2 2 2 3.2 3.2 6.3 10–16 10–16 20

Rated Capacity – Hoists incl. Trolley (tonne) 0.25 0.5 1 1.6 2 3.2 3.2 6.3 10 16 20

Weight – LN Trolley (kg) 7.7 7.7 10.5 18 18 26 26 117 190 190 -

Weight – LH Trolley (kg) 26 26 26 26 26 37 37 127 220 220 285

Weight – LM Trolley (kg) 26 26 26 26 26 33 33 124 220 220 285

Hose weight with standard lift (kg) 27 27 28 56 34 86 66 110 156 240 285

Weight with standard lift – LN Trolley (kg) 34.7 34.7 38.5 74 52 112 92 227 346 430 -

Weight with standard lift – LH Trolley (kg) 53 53 54 82 60 123 103 237 376 460 570

Weight with standard lift – LM Trolley (kg) 53 53 54 82 60 119 99 234 376 460 570

Weight of 1m chain (kg) 1 1 1 1.8 1 3.8 1.8 3.8 5.8 5.8 5.8

No. of chain strands 1 1 1 1 2 1 2 2 2 3 4

Chain Dimension (mm) 7 x 21 7 x 21 7 x 21 9 x 27 7 x 21 13 x 36 9 x 27 13 x 36 16 x 45 16 x 45 16 x 45

Air Pressure – LM Trolley (bar) 6 6 6 4 - 6 6 6 4 - 6 6 6 6 6

Air Consumption – LM Trolley (m³/min) 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 1.3 1.3 1.3

Air Consumption – Hoist (m³/min) 1.5 1.5 1.5 1.5–2.6 1.5 5.5 1.5–2.6 5.5 5.5 5.5 5.5

Motor Output – LM Trolley (kW) 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.7 0.7 0.7

Motor Output – Hoist (kW) 1 1 1 1.3 – 2 1 3.5 1.3 – 2 3.5 3.5 3.5 3.5

Travelling Speed – LM Trolley (m/min) 9 / 14 9 / 14 9 / 14 9 / 14 9 / 14 9 / 14 9 / 14 9 / 14 5 / 12 5 / 12 5 / 12

Hose Connection – LM Trolley G½ G½ G½ G¾ G½ G¾ G¾ G¾ G¾ G¾ G¾



Dimensions (in mm)

JDN Manual Trolleys (LN)

*Chain buckets increase the hoist headroom

Model 0.25Ti 0.5Ti 1Ti 1.5Ti 2Ti 3Ti 3Ti/2 6Ti 10Ti 16Ti

With trolley LN 0.5T LN 1T LN 2T LN 3.2T LN 6.3T LN 10-16T

A 260 260 260 310 310 292 292 500 490 490

B max. 119 119 122 122 162 113 162 141 142 142

C b + 28 b + 28 b + 28 b + 26 b + 26 b + 60 b + 60 b + 70 b + 70 b + 70

d 55 55 68 80 80 84 84 165 165 165

D max. 199 199 199 122 122 113 113 141 142 142

E 137 137 137 170 137 187 140 154 197 199

F 39 39 39 45 46 46 75 79 109 109

G 145 145 145 200 145 233 200 233 308 382

H 152 152 152 212 152 250 212 250 267 310

J* (mounted) - - - - - 635 613 763 929 982

J* (suspended) 530 530 530 588 597 798 - 919 1176 1260

K 67.5 67.5 81.5 94 94 108 107 188 188 188

L 28 28 28 26 28 30 28 40 44 53

M 42 42 42 40 42 42 42 51 66 82

N 130 130 130 150 150 136 136 236 236 236



JDN Geared Trolleys (LH)



With trolley LH 2T LH 3.2T LH 6.3T LH 10-16 LH 20T

A 250 250 250 250 250 292 292 500 490 490 600

B max. 130 130 130 130 130 113 113 141 142 142 132

C b + 36 b + 36 b + 36 b + 36 b + 36 b + 60 b + 60 b + 70 b + 70 b + 70 b + 68

d 70 70 70 70 70 84 84 165 165 165 185

D 284 284 284 283 284 294 297 307 320 320 320

E 137 137 137 170 137 187 140 154 197 199 180

F 39 39 39 45 46 46 75 79 109 109 135

G 145 145 145 200 145 233 200 233 308 382 382

H 152 152 152 212 152 250 212 250 267 310 310

J* (mounted) - - - - - 635 613 763 929 982 1125

J* (suspended) 563 563 563 602 611 798 - 919 1176 1171 1475

K 103 103 103 103 103 110 110 215 215 215 226

L 28 28 28 26 28 30 28 40 44 53 75

M 42 42 42 40 42 42 42 51 66 82 86

N 116 116 116 116 116 136 136 236 236 236 274



JDN Motorised Trolleys (LM)



With trolley LM 2T LM 3.2T LM 6.3T LM 10-16T LM 20T

A 250 250 250 250 250 292 292 500 490 490 600

B max. 130 130 130 130 130 113 113 141 142 142 132

C b + 36 b + 36 b + 36 b + 36 b + 36 b + 60 b + 60 b + 70 b + 70 b + 70 b + 68

d 70 70 70 70 70 84 84 165 165 165 185

D 183 183 183 185 183 191 191 205 328 328 328

E 137 137 137 170 137 187 140 154 197 199 180

F 39 39 39 45 46 46 75 79 109 109 135

G 145 145 145 200 145 233 200 233 308 382 382

H 152 152 152 212 152 250 212 250 267 310 310

J* (mounted) - - - - - 635 613 763 929 982 1125

J* (suspended) 563 563 563 602 611 798 - 919 1176 1171 1475

K 95 95 95 95 95 107 107 188 188 188 218

L 28 28 28 26 28 30 28 40 42 55 75

M 42 42 42 40 42 42 42 51 66 82 86

N 116 116 116 116 116 136 136 236 236 236 274



JDN LOW HEADROOM TROLLEYS

The JDN Low Headroom Trolleys are the solution where headroom is restricted and standard trolleys

are unable to meet the lifting height requirements. This, together with having the JDN Air Hoist mounted

in a horizontal position, could just be the answer in a difficult lifting situation. The carrying capacity of

these models vary from 0.5 tonne up to 6.3 tonne, with an air pressure of 6 bar.

Features

Manufactured in Germany, under strict quality

control with demanding tolerances.

All JDN models are manufactured to comply

with AS1418.2.

Small number of maintenance / wear-free

moving parts.

No additional motor lubrication required.

Two-step travelling speed.

Adjustable trolley widths to suit your requirements.

Able to negotiate curves.

Extended trolley tie bars for bulky elongated loads.

Optional Rack and pinion drive, off shore paint and spark

resistant packages available

Various options for Air supply systems available

Specifications

Hoists & Trolley Model PROFI 0.5Ti

& LMF05 - 2t

PROFI 1Ti

& LMF05 - 2t

PROFI 2Ti

& LMF05 - 2t

PROFI 3Ti

& LMF3.2t

PROFI 6Ti

& LMF6.3t

Stock Code JDN706 JDN715 JDN725 JDN735 JDN765

Rated Capacity (tonne) 0.5 1 2 3.2 6.3


Motor Output – Hoist (kW) 1 1 1 3.5 3.5

Motor Output – Trolley (kW) 0.2 0.2 0.2 0.2 0.2

Air Pressure (bar) 6 6 6 6 6

Lifting speed at full load (m/min) 10 5 2.5 4.5 2.2

Lowering speed at full load (m/min) 17 11 5.5 10.8 5.4

Travelling speed at full load (m/min) 9 / 14 9 / 14 9 / 14 9 / 14 9 / 14

Air consumption at full load (m³/min) 1.2 1.2 1.2 1.2 1.2

Air Connection G½ G½ G½ G¾ G¾

Hose Dimension (mm) 13 13 13 19 19

Weight with standard lift & control (kg) 98 99 105 210 330


Weight of chain (kg) 1 1 1 3.8 3.8


Max. bottom flange – thickness (mm) 25 25 25 35 35

Max. bottom flange – width (mm) 310 310 310 310 310

Min. bottom flange – width (mm) 80 80 80 125 125

Noise level at full load lifting (dB (A)) 75 76 76 78 78

Noise level at full load lowering (dB (A)) 78 78 78 80 80



Dimensions (in mm)

Hoists & Trolley Model PROFI 0.5Ti

& LMF 05 - 2t

PROFI 1Ti

& LMF 05 - 2t

PROFI 2Ti

& LMF 05 - 2t

PROFI 3Ti

& LMF 3.2t

PROFI 6Ti

& LMF 6.3t

A max. 105 105 105 105 106

B 36 36 36 36 70

b min. 80 80 80 80 125

C 164 164 164 164 169

D1 70 70 70 70 165

D2 70 70 70 70 70

E1 116 116 116 116 236

E2 116 116 116 116 116

F 172 172 195 228 351

G1 95 95 95 95 197

G2 95 95 95 95 95

H min. 320 320 394 415 537

J 320 320 320 397 397

K1 145 145 145 233 233

K2 152 152 152 248 248

L 715 715 715 825 995

M 28 28 28 30 40

N 42 42 42 42 51

t max. 25 25 25 35 35



JDN CONTROLS

JDN Air Hoists are available with various controls to suit every application.

Rope Control

The rope control provides infinite speed control for lifting and lowering and is

suitable for any required control length. The rope control is available for all

PROFI hoists up to 25 tonne carrying capacity. The PROFI 37Ti, 50Ti and

100Ti are fitted with a pull chain instead of a cord.

FI-Control

This FI-control allows infinitely variable speed control and the

ergonomic design of the synthetic housing ensures comfortable

handling for the operator. The use of non-rusting materials

allows the application in areas with aggressive substances in

the atmosphere. The control hoses are enclosed in an outer

sheath which protects them from external conditions.

F-Control

The F-control consists of unbreakable synthetic material resistant to

ambient influences. The ergonomically designed housing ensures ease of

handling. Up to 18 different control functions can be integrated into a

single pendant control; for example key switch, double stage travelling

speed and simultaneous control of several motors. The F-control can also

be delivered with optional infinitely variable control of hoisting and

travelling speeds.

E-Control

The very robust brass valve distinguishes the E-control. The

orientated design results in easy of handling. Only available in single

speed control.

Controls for JDN M-Series

DS Control

The operating air is connected to the hand control valve. A built-in pressure

regulator prevents overload to the hoist in case of inadmissibly high

pressure. The motor connection housing of the DS control includes an oiler

which automatically stops the oil flow when the hoist comes to a standstill.

An additional advantage: the oiler is situated directly around the motor. The

operating air immediately feeds to the motor when the hand lever is

actuated. The hand lever is spring loaded and returns automatically to the

zero position when released. This forced release serves also as an

emergency stop. The DS control is for two-hand operation and it is

available for all air hoists of the "B" and "M" series.

PS Control

The PS control is an alternative for the DS control, being a single hand use

controller for the M-series hoists.

Controls for JDN Air Hoists with Motor Trolley and JDN Monorail Hoists

For controlling JDN air hoists with motorised trolleys and JDN monorail hoists we recommend the four

button version E or F - Control. The rope control option is also available.

Controls for JDN Air Cranes

For controlling JDN air cranes the F-control is the most suitable due to its multi-function capability.

Operating convenience via Radio Control

To overcome excessive distances between operator and crane, or to remotely use hoisting equipment,

the JDN Radio Control offers a convenient and safe alternative to other control types. The JDN Radio

Control is also available in explosion proof design.



VITAL CHAIN BLOCKS

Vital is a Japanese brand which is globally recognised for their high quality products. Their range of chain blocks are suited for many applications in the mining, construction, industrial and automotive industry. They have proven to be an economical method to lift heavy loads with ease. The capacities vary from 0.5 tonne to 20 tonne and all chain blocks can be supplied with overload protection for added security of use.

Features

• Manufactured in Japan using optimum high quality steel which conforms to the strict JIS & ISO regulations.

• All Vital models are manufactured to comply with AS1418.2.

• Designed for long-term use while providing the lowest possible per-use cost.

• Can be supplied close coupled and extra close coupled to girder trolleys to alleviate headroom restrictions.

• All Vital chain blocks can be supplied with overload protection.

• Customised lift height are available upon request.

• Quality caged needle bearings on load sheave and thrust bearings on bottom hook.

• Hardened alloy steel load chain with embossed identification, marked as to the relevant standards.

• Load chain exceeds Australian Standards with 5:1 Safety Factor.

Specifications

*Vital chain blocks with customised lift heights are available

Dimensions (in mm)

MODEL 05VH5 10VH5 15VH5 20VH5 30VH5 50VH5 75VH5 90VH5 92VH5 93VH5

Stock Code VCB050 VCB100 VCB150 VCB200 VCB300 VCB500 VCB750 VCB910 VCB915 VCB920

Rated Capacity (tonne) 0.5 1.0 1.5 2.0 3.0 5.0 7.5 10.0 15.0 20.0

Standard Lift Height (m) 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0

Pull to lift load (kg) 25 33 34 34 35 39 41 41 41 x 2 41 x 2

Net Weight (kg) 8.6 11.5 13.8 21.6 23.0 41.0 60.5 78.0 150.0 190.0

MODEL 05VH5 10VH5 15VH5 20VH5 30VH5 50VH5 75VH5 90VH5 92VH5 93VH5 A 127 147 147 179 147 179 179 179 207 207

B 144 157 174 204 206 263 345 367 745 873

C 305 345 370 425 505 635 740 760 850 870

D 27 30 34 37 43 47 67 67 87 87



VITAL LEVER BLOCKS NR-2 SERIES

Vital is a Japanese brand which is globally recognised for their high quality products. The NR-series

lever blocks feature the “free-wheeling” braking system which enables fast and easy operation. There is

a minimum load requirement of 10% of the Working Load Limit to ensure that the braking system

remains operative and continues to support the load. These lever blocks are ideally suited for the

shipbuilding, construction, mining and power transmission industries.

Features

Manufactured in Japan using optimum high quality steel which conforms to

the strict JIS & ISO regulations.

All Vital models are manufactured to comply with AS1418.2.

One-touch operation for free chain adjustment.

Vital lever blocks can be supplied with overload protection for added security

of use (excluding 250kg and 500kg models).

The unique design of the bottom hook prevents slipping and ensures safe

operation.

Hardened alloy steel load chain with embossed identification, marked to the

relevant standards.

Load Chain Exceeds Australian Standards with 5:1 Safety Factor.

Minimum load requirement of up to 10% of the Working Load Limit to ensure

the operation of the braking system. E.g. a 1.5 tonne lever block requires a

minimum load of 150kg.

Light loading; not suitable for tandem operations. If one of the lever blocks

used in the tandem experiences an increase in the shared load and the

other is reduced below the minimum load, inoperative breaks may occur and

this could cause for the load to fall. For these applications we recommend

the Vital Lever Blocks VR-2 series

Specifications

*Vital lever blocks with customised lift heights are available.

Dimensions (in mm)

MODEL NR2-03 NR2-05 NR2-08 NR2-10 NR2-15 NR2-30 NR2-60 NR2-90

Stock Code VLB202 VLB205 VLB207 VLB210 VLB215 VLB230 VLB260 VLB290

Rated Capacity (tonne) 0.25 0.5 0.8 1.0 1.6 3.2 6.3 9.0

Standard Lift Height (m) 1.0 1.5 1.5 1.5 1.5 1.5 1.5 1.5

Pull to lift load (kg) 30 34 21 23 27 38 39 40

Net Weight (kg) 1.9 3.5 6.0 7.2 9.8 16.6 27.0 47.3

Chain Size (mm) 4.0 5.0 5.6 6.3 7.1 9.0 9.0 9.0

No. of Falls 1 1 1 1 1 1 2 3

MODEL NR2-03 NR2-05 NR2-08 NR2-10 NR2-15 NR2-30 NR2-60 NR2-90

A 85 110 146 146 161 191 191 191

B 65 82 119 126 146 180 243 318

C 230 260 295 325 350 425 565 680

D 150 267 256 256 368 368 368 368

E 24 27 27 30 34 43 47 67



VITAL LEVER BLOCKS VR-2 SERIES

Vital is a Japanese brand which is globally recognised for their high quality products. The VR-series

lever blocks feature a “lock-in and lock-out” braking system which is the more traditional style with a free-

wheeling system requiring the disengagement of the gear drive mechanism which is impossible with any

load suspended on it. These lever blocks are ideally suited for the (underground) mining, aerospace and

energy industries.

Features

Manufactured in Japan using optimum high quality steel which

conforms to the strict JIS & ISO regulations.

All Vital models are manufactured to comply with AS1418.2.

Vital lever blocks can be supplied with overload protection for added

security of use (excluding 250kg and 500kg models).

The unique design of the bottom hook prevents slipping and ensures

safe operation.

Easy two-step operation to prevent accidental free-wheeling.

Hardened alloy steel load chain with embossed identification, marked

as to the relevant standards.

Load Chain Exceeds Australian Standards with 5:1 Safety Factor.

The Vital VR-2 series are suitable for tandem lifting applications.

Specifications

*Vital lever blocks with customised lift heights are available.

Dimensions (in mm)

MODEL VR2-08 VR2-15 VR2-30 VR2-60

Stock Code VLB107 VLB115 VLB130 VLB160

Rated Capacity (tonne) 0.8 1.6 3.2 6.3

Standard Lift Height (m) 1.5 1.5 1.5 1.5

Pull to lift load (kg) 15 18 38 39

Net Weight (kg) 6.9 9.7 16.3 26.7

Chain Size (mm) 6.3 7.1 9.0 9.0

No. of Falls 1 1 1 2

MODEL VR2-08 VR2-15 VR2-30 VR2-60

A 148 163 191 191

B 128 148 181 244

C 295 355 405 550

D 260 370 370 370

E 27 34 43 47



e

VITAL OVERLOAD LIMITER

Vital is a Japanese brand which is globally recognised for their high quality products. Their ranges of

chain & lever blocks are suited for many applications in the mining, construction, industrial and

automotive industry. One of the many unique features of the Vital products is the optional Overload

Limiter which ensures an added security of use by protecting the user and the lifting appliance from

dangerous overload situations.

Overload protection is achieved by adjusting the lock nut on the overload plate which is set and tested at

the Vital factory. This adjustment allows the tapered hub to slip on the change gear, by not allowing the

chain or lever block to be overloaded. The braking function is unaffected as the brake discs still lock as

normal.

Overload protection is available on all Vital Chain & Lever Block models, excluding the 250kg and 500kg

lever blocks. All Vital products are manufactured to comply with AS1418.2 and manufactured in Japan

using optimum high quality steel which conforms to the strict JIS & ISO regulations.

Overload Limiter Parts Diagram

NO. DESCRIPTION QUANTITY

1 Supporter 1

2 Ball Spring 1

3 Ball 1

4 Brake Disk B/OLL 1

5 Hard Wheel OLL 1

6 Brake Disk A/OLL 1

7 Pad Plate 1

8 Conic Spring 1

9 Washer 1

10 Nut 1

11 Cotter Pin OLL 1



PACIFIC CHAIN BLOCKS WITH OPTIONAL OVERLOAD PROTECTION

Pacific Chain Blocks feature better quality in a new compact design. The extensive range is suitable for

many applications in the mining, construction, industrial and automotive industry. A patented Overload

Limiting device is available for all sizes (except for 250kg capacity) to improve safety. These chain

blocks have it all; better quality, easy to use, improved safety and all of this with reduced cost.

Features


High strength end stop with secondary end anchor for increased safety.

“T” type hooks for improved load holding integrity (except for the 250kg capacity).

Gear system design for reduced effort when lifting loads.

Includes a specially designed hand wheel to eliminate hand chain slippage and pocket wear.

Encapsulated needle bearings and side plate bearings for smoother operation.

Brake lockout bearing for security of braking mechanism.

Key internal components are CNC machined before being heat-treated and toughened.

Fitted with high quality European zinc plated Grade 80 load chain.

No aluminum content which ensures suitability for mining applications.

Overall better design and improved finish to prolong life expectancy.

All models available with a patented Overload Limiting device (except for the 250kg capacity).

Now available with a complimentary display stand when purchasing a product stock package. For more information, please contact your Pacific Hoists representative or refer to page 3.

Specifications

*Pacific chain blocks with customised lift heights are available

Dimensions (in mm)

CAPACITY 250 KG 500 KG 1

TONNE

1.5

TONNE

2

TONNE

3

TONNE

5

TONNE

10

TONNE

Stock Code PCB 301 302 303 306 313 316 318 319 323 326 333 336 353 356 359 360

Lift Height (m) 3 6 3 6 3 6 3 6 3 6 3 6 3 6 3 6

Test Load (kg) 375 750 1500 2250 3000 4500 7500 15000

Effort to lift full load (N) 190 210 285 325 355 340 400 540

No. of Falls 1 1 1 1 1 2 2 4

Hand Chain (mm x mm) Ø5 x 23.7

Hand Chain Drop (m) 2 5 2 5 2 5 2 5 2 5 2 5 2 5 2 5

Load Chain (mm x mm) Ø4 x 12 Ø5 x 15 Ø6.3 x 19 Ø7.1 x 21 Ø8 x 24 Ø7.1 x 21 Ø9 x 27 Ø9 x 27

Net Weight for 3m lift (kg) 6 9 12 14 20 23 39 75

Stock Code with O/L PCB 301L 302L 303L 306L 313L 316L 318L 319L 323L 326L 333L 336L 353L 356L 359L 360L

MODEL 250KG 500KG 1 TONNE 1.5 TONNE 2 TONNE 3 TONNE 6 TONNE 10 TONNE

A 106 128 142 158 175 158 183 195

B 68 75 76 80 88 80 90 95

C 108 130 150 170 185 220 225 355

D 280 280 330 360 385 510 615 810

E 20 22 26 29 35 37 43 47

F Ø18 Ø20 Ø25 Ø30 Ø33 Ø36 Ø43 Ø44



PACIFIC LEVER BLOCKS WITH OPTIONAL OVERLOAD PROTECTION

The extensive range of Pacific Lever Blocks feature superior quality at an affordable price. They are

suitable for applications in the mining, construction, transport and automotive industry. A patented

Overload Limiting device is available to improve safety (except for 250kg capacity).

Features


“T” type hooks for improved load holding integrity (except for the 250kg capacity).

New design double pawl safety springs to eliminate sticking

New style cast hand wheel for added strength and durability

Encapsulated needle bearings and side plate bearings for smoother operation.

Brake lockout bearing for security of braking mechanism.

All Pacific lever blocks can be supplied with overload protection (except 250kg).

Key internal components are CNC machined before being heat-treated and toughened.

Fitted with high quality European zinc plated Grade 80 load chain.

No aluminum content which ensures suitability for mining applications.

Overall better design and improved finish to prolong life expectancy.

Now available with a complimentary display stand when purchasing a product stock package. For more information, please contact your Pacific Hoists representative or refer to page 3.

Specifications

*Pacific lever blocks with customised lift heights are available

Dimensions (in mm)

CAPACITY 250 KG 500 KG 800 KG 1.6

TONNE

3.2

TONNE

6.3

TONNE

Stock Code PLB302 PLB305 PLB308 PLB316 PLB332 PLB363

Lift Height (m) 1.5 1.5 1.5 1.5 1.5 1.5

Test Load (kg) 375 750 1200 2400 4800 9450

Effort to lift full load (N) 115 248 285 315 360 370

No. of Falls 1 1 1 1 1 2

Load Chain (mm x mm) Ø4 x 12 Ø5 x 15 Ø5.6 x 17 Ø7.1 x 21 Ø10 x 28 Ø10 x 28

Length of lever handle (D) (mm) 168 253 273 378 418 418

Net Weight for 1.5m lift (kg) 1.86 4.42 5.71 9.27 16.50 21.29

Stock Code with O/L N/A PLB305L PLB308L PLB316L PLB332L PLB363L

CAPACITY 250 KG 500 KG 800 KG 1.6 TONNE 3.2 TONNE 6.3 TONNE

A 100 143 147 173 200 200

B 70 85 87 99 112 112

C 86 118 132 145 198 230

D 235 310 340 400 520 640

E 168 253 273 378 418 418

F 20 22 26 29 37 43

G Ø18 Ø20 Ø25 Ø30 Ø36 Ø43



PACIFIC PRODUCT DISPLAY STAND

With the purchase of one of our product stock packages, you are entitled to a complimentary Pacific

Product Display Tripod Stand; made from quality steel. It features lockable castor wheels for ease of

movement and safety while on display. The Pacific Hoists signage includes a QR code for quick access

to product features, specifications and line drawings. The stand allows for the display of chain blocks,

lever blocks, trolleys and clamps.

Features

Tripod stand made from quality steel.

Inclusive of lockable castor wheel for ease of movement and safety

while on display.

This display stand is collapsible by unbolting the screws.

Pacific Hoists signage which includes a QR code for quick access to

product features, specifications and line drawings.

For the display of a variety of chain and lever blocks, trolleys and clamps.

Contact your Pacific Hoists representative to discuss your stock

requirements. The package must consist of Pacific GEN III chain

blocks or lever blocks, Pacific trolleys and clamps. An example of such

package can be 1x PCB303. 1x PCB313, 2x PCB313L, 2x PCB316L,

1x PLB302, 1x PLB308L, 1x PLB316L, 2x PGC310 and 2x PPT105.*

Specifications & Dimensions

PRODUCT CODE STAND

Height (m) 220

Width (m) 140

Depth (m) 140

Weight; excl. products (kg) 25



*The display stand is offered as part of this package for the sole purpose of display of products offered by Pacific Hoists.

PACIFIC GIRDER CLAMPS

Pacific Girder Clamps are used to safely suspend loads of many descriptions from girders (I-beams).

Manual, Electric and Air hoist installations are examples of their wide capability of usage.

Features

All Pacific girder clamps are manufactured to comply with AS4991.

Quick and easy to install and reposition makes them ideal for maintenance tasks

Jaws clamp over girder flanges.

Also suitable for lifting I-beams.

Can be used at up to 45 degree angle with

a 50% reduction in capacity.

Specifications

Dimensions (in mm)

MODEL PGC310 PGC320 PGC330 PGC350 PGC390

Stock Code PGC310 PGC320 PGC330 PGC350 PGC390

Rated Capacity (kg) 1000 2000 3000 5000 10,000

Beam width range (mm) 80 - 245 80 - 245 90 - 310 90 - 310 90 - 320

Net Weight (kg) 3.5 4.5 9.5 11.0 16.0

MODEL PGC310 PGC320 PGC330 PGC350 PGC390

A 270 270 365 365 365

B 375 375 520 520 520

C 66 74 103 111 120

D 4 6 8 10 12

E 25 25 45 45 50

F 165 165 225 225 230

G 210 210 258 258 280

H 50.5 - 82 50.5 - 82 80.5 - 126 80.5 - 126 94.5 - 138

I 12 12 19 19 21



PACIFIC PIPE TROLLEY

The Pacific Pipe Trolley is compact and lightweight, a general purpose unit and designed to suit 60mm

O/S diameter pipe.

Features

The Pacific pipe trolley is manufactured

to comply with AS4991.

Designed to suit 60mm outside diameter

pipe

Compact and lightweight with powder

coated finish.

Specifications

MODEL PPT203

Stock Code PPT203

Rated Capacity (kg) 300

Pipe Diameter (mm) 60

Net Weight (kg) 2.5

Dimensions (in mm)

MODEL PPT203

A 147.5

B 160

C 22

D 68

E 160

F 60

G 17



PACIFIC SERIES 1 GIRDER TROLLEYS

Pacific Series 1 Girder Trolleys feature a strongly constructed, fully adjustable trolley which is designed

to fit the flanges of both tapered and parallel beams. They are available as push or geared variety and

comply with all relevant Australian Standards.

Features

All Pacific girder trolleys are manufactured to

comply with AS1418.2.

Choose from either push or hand-geared travel.

Twin pin configuration provides closer

headroom than single pin variety

Available to suit larger beam widths on request

Fitted with anti-drop plates for improved safety

and compliance.

Can be supplied close coupled to suit most Pacific hoists.

Specifications

Pacific Series 1 Girder Trolleys (PUSH)

*Additional beam width available on request.

Pacific Series 1 Girder Trolleys (GEARED)

*Additional beam width available on request.

Dimensions (in mm)

Pacific Series 1 Girder Trolleys (PUSH)

MODEL PPT105 PPT110 PPT120 PPT130 PPT150 PPT160

Stock Code PPT105 PPT110 PPT120 PPT130 PPT150 PPT160


Beam width (mm) 62 - 172 76 - 204 90 - 216 126 - 210 126 - 210 125 – 310

Min. curve radius (m) 0.8 1.0 1.5 1.7 1.7 2.7

Net Weight (kg) 6.06 10.88 19.12 34.96 36.30 118.0

Gross Weight (kg) 6.4 11.32 19.88 36.22 36.70 133.0

MODEL PGT110 PGT120 PGT130 PGT150 PGT160

Stock Code PGT110 PGT120 PGT130 PGT150 PGT160

Rated Capacity (kg) 1000 2000 3000 5000 10,000

Beam width (mm) 76 - 204 90 - 216 126 - 210 126 - 210 125 – 310

Min. curve radius (m) 1.0 1.5 1.7 1.7 2.7

Net Weight (kg) 15.08 24.44 40.30 42.10 131.0

Gross Weight (kg) 15.75 25.32 41.64 43.50 148.0



Pacific Series 1 Girder Trolleys (GEARED)


A 179 217 281 315 315 399

B 131 151 162 176 179 253.5

C 132 153 164 176 179 253.5

D 68 76 106.5 123 123 167

E 51.5 69 83 125.5 125.5 172

MODEL PGT110 PGT120 PGT130 PGT150 PGT160

A 238 303 332 332 399

B 206 212.5 210.5 210.5 335.5

C 153 164 176 179 253.5

D 87 117.5 131 131 167

E 69 83 125.5 125.5 172



PACIFIC GIRDER TROLLEYS

Pacific Girder Trolleys feature high quality construction for an economical price. They are available in

either a push or geared variety and comply with all relevant Australian Standards.

Features

All Pacific girder trolleys are manufactured to

comply with AS1418.2.

Fully adjustable to suit various beam widths.

Fitted with anti-drop plates for improved safety

and compliance.

High-grade, fully sealed bearings for

maintenance free extended life.

Available with either push or hand geared travel.

Anti-drop plates as standard for improved safety

and compliance.

Specifications

Pacific Girder Trolleys (PUSH)

Pacific Girder Trolleys (GEARED)

Dimensions (in mm)

Pacific Girder Trolleys (PUSH)


Stock Code PPT305 PPT310 PPT320 PPT330 PPT350 PPT360


Pin Configuration Single Single Single Single Single Twin

Min. radius of curve (m) 0.8 1.0 1.1 1.3 1.4 2.0

Net Weight (kg) 6.5 10.5 17.5 27.0 41.0 86.0

MODEL PGT305 PGT310 PGT320 PGT330 PGT350 PGT360

Stock Code PGT305 PGT310 PGT320 PGT330 PGT350 PGT360


Pin Configuration Single Single Single Single Single Twin

Min. radius of curve (m) 0.8 1.0 1.1 1.3 1.4 2.0

Net Weight (kg) 10.5 14.5 21.5 31.0 46.0 91.0



Pacific Girder Trolleys (GEARED)


A 223 270 300 356 405 485

B 188 224 261 308 354 395

C 32 40 52 62 75 110

D 24 30 38 40 50 70

E 244 310 327 342 354 480

F 50 - 152 64 - 203 88 - 203 100 - 203 114 – 203 124 – 305

G 1.5 - 3

H 105 126.5 146 169 197 188

I 31 38 36 40 42 40

MODEL PGT305 PGT310 PGT320 PGT330 PGT350 PGT360

A 223 270 300 356 405 485

B 188 224 261 308 354 395

C 32 40 52 62 75 110

D 24 30 38 40 50 70

E 273 341 349 362 374 501

F 50 - 152 64 - 203 88 - 203 100 - 203 114 – 203 124 – 305

G 1.5 – 3

H 105 126.5 146 169 197 188

I 31 38 36 40 42 40



PACIFIC SINGLE FLANGE TROLLEY WHEELS

Features

The Pacific Single Flange Trolley Wheels are ideally suited for general machinery production, crane building, platforms, carriages and rail systems. They are designed to suit both parallel and tapered flanges and are available in different capacities from 500 kg to 10 tonne.

• CNC machined from high quality 45# steel.

• Designed to suit both parallel and tapered flanges.

• Fully sealed ball bearings.

• Inclusive of dust cap and circlip.

• Supplied complete; with galvanised axle and nut.

The information shown is to be used as a guide only. Specifications are subject to change without notice. All materials handling or lifting jobs should be assessed individually. Pacific Hoists products are NOT to

be used for lifting or lowering persons.

MODEL PTW005 PTW010 PTW020 PTW030 PTW050 PTW100

Rated Capacity on 4 Wheels 500 kg 1 tonne 2 tonne 3 tonne 5 tonne 10 tonne

Rated Capacity per Wheel 125 kg 250 kg 500 kg 750 kg 1.25 tonne 2.5 tonne

Weight (kg) 0.7 1 2.5 3.7 6.2 12.3

Specifications

Dimensions (in mm)

MODEL PTW005 PTW010 PTW020 PTW030 PTW050 PTW100

ØA 62 70 100 114 140 175

ØB 92 100 136 160 190 230

C 9 9 11 13 15 12

D 18 20 24 28 34 53

E 2 2 2 3 3 3.2

F M16 M20 M24 M30 M36 M48

G 30 35 45 50 60 70

CROSBYIP LIFTING CLAMPS

The CrosbyIP range of lifting clamps are manufactured from high quality steel which has been forged,

quenched, tempered and heat-treated to guarantee the safety and durability required by industrial

applications. All clamps have been ergonomically designed to be user friendly (smaller, lighter and more

compact), while not sacrificing strength and durability.

The CrosbyIP lifting clamps are available in a variety of models to allow the lifting and transferring of

steel plates and other materials in a wide variety of industries. These industries include ship building,

offshore, aircraft, construction and metal-processing.

Features

All models are manufactured to comply with

AS4991.

Manufactured by a market world leader.

All clamps have been subject to rigorous quality

control for maximum reliability.

All products are supplied with a test certificate

and instruction manual.

All vertical plate clamps may be used to lift

materials with a hardness up to 345 Brinell

(37Rc).

IPBC Horizontal Lifting Clamp

IPU10 Vertical Plate Clamp

IPNM10 Non Marring Vertical Plate

Specifications

CLAMP TYPE MODEL RATED

CAPACITY (KG) JAW (MM)

STOCK

CODE

Universal Vertical Plate

This model is based on the IP10 lifting

clamp but is equipped with a universal

(hinged) hoisting eye. This makes it

possible to lift loads from any given

direction. The IPU10 clamp is also very

useful in applications where larger plates

are to be lifted with two clamps in

combination with a two-legged chain.

0.5-IPU10 500 0 – 16 CLP005

1-IPU10 1000 0 – 20 CLP010

2-IPU10 2000 0 – 35 CLP020

3-IPU10 3000 0 – 40 CLP030

4.5-IPU10 4500 0 – 40 CLP040

6-IPU10 6000 0 – 50 CLP060

9-IPU10 9000 0 – 50 CLP070

9-IPU10/J 9000 50 – 100 CLP071

12-IPU10 12000 0 – 54 CLP080

12-IPU10/J 12000 54 – 108 CLP081

Vertical Plate

The IP10 clamps may be used to lift,

turn by 180º and vertically transport

steel plates and construction elements.

0.5-IP10 500 0 – 16 CLP014

1-IP10 1000 0 – 20 CLP012

2-IP10 2000 0 – 35 CLP022

3-IP10 3000 0 – 40 CLP032

4.5-IP10 4500 0 – 40 CLP042

6-IP10 6000 0 – 50 CLP062

9-IP10 9000 0 – 50 CLP075

9-IP10/J 9000 50 – 100 CLP076

12-IP10 12000 0 – 54 CLP085

12-IP10/J 12000 54 – 108 CLP086

Non Marring Vertical Plate

1-IPNM10 1000 0 – 20 CLP410



Specifications (Continued)

CLAMP TYPE MODEL RATED

CAPACITY (KG) JAW (MM)

STOCK

CODE

Horizontal Plate

These clamps are suitable for the lifting

and transfer in horizontal position of

non-sagging steel plates. The clamp is

equipped with a handle for simple and

easy placement onto the plate. These

clamps must be used in pairs or more.

Available in capacities of 2 to 12 tonne.

All clamps are individually proof tested

to 2 times the rated capacity with

certification.

2 IPH10E 2000 0 – 60 CLP516

3 IPH10E 3000 0 - 60 CLP531

3 IPH10JE 3000 60 - 120 CLP536

4.5 IPHTONZ 4500 0 - 60 CLP545

6 IPH10E 6000 0 - 60 CLP561

6 IPH10JE 6000 60 - 120 CLP571

9 IPH10E 9000 0 - 60 CLP091

9 IPH10JE 9000 60 - 120 CLP096

12IPH10E 12000 0 - 60 -

12IPH10JE 12000 60 - 120 -

Horizontal Lifting Clamp (Manual pre-tensioning)

1-IPBC 1000 0 – 20 CLP100

2-IPBC 2000 0 – 25 CLP200

Vertical Drum

The IPVK drum clamp is for vertical lift and

transfer. Automatically locks on drum and

can be used alone or in pairs. The IPDV

drum is for vertical lift and transfer. Allows

drum to remain in an upright position

during the lift and transfer using one clamp.

0.5-IPVK 500 17 CLP900

0.5-IPDV 500 300 CLP910

Horizontal Plate (with locking device)

1.5-IPHGZ 1500 0 – 25 CLP115

3-IPHGZ 3000 0 – 40 CLP130

Horizontal Pipe Hook (pair)

2-IPP 2000 200 CLP320

Beam Clamp (with locking device)

1.5-IPBHZ 1500 0 – 25 CLP580

3-IPBHZ 3000 0 – 40 CLP585





ELECTRICAL FEED SYSTEMS

Pacific Hoists offer a range of electrical feed systems to supply power to travelling hoists, cranes and other

machinery.

AKAPP Multi Conductor Systems

AKAPP delivers compact, reliable and secure power supply systems for

cranes, hoists and trolleys. The installation of these systems is suitable for

both inside and outside, high and low temperatures and for extreme (weather)

conditions. The unique double-sided flexible rubber seal provides protection

against dust, damp and corrosive environments. The rail system accepts up to

seven conductors in continuous lengths, up to 300m.

Metreel Festoon System

The Metreel flatform cable festoon system is designed to support one or more flatform

cables of various sizes. The “C” track provides sag free support of power and pendent

cables, air lines etc. to electric hoists, air hoists, power tools, air tools in a wide variety

of applications.

Roller Hanger System

This roller hanger system is an economical solution for powering an

electric hoist which is easy to install and requires minimal

maintenance. The hangers accept a round form cable and operate

along a fixed wire.

Zeca Cable Reels

Zeca cable reels are lightweight and provide a safe and economical method

of supplying power to moving machinery. They are designed for outdoor and

indoor installations and require minimal assembly. The reels are spring

loaded; allowing the cable to be pulled out and to automatically recover as

the machine moves back and forward. A large range of cable lengths are

available.

Specifications

*Customised Track to Track Support available upon request

ITEM DESCRIPTION STOCK CODE

CATENARY CABLE & STRAINER WIRE SYSTEM

Pacific Cable Trolleys N/A CAB001

3mm Galv Strainer Wire N/A 400002

Round Cable 1.5mm 4 core & 10 amps CAB400

Round Cable 1.5mm 3 core x 10 amps CAB300

CABLE REELS (RUN ON EITHER SINGLE OR THREE-PHASE)

Zeca (6179PRC) with 15m 4 x 2.5mm² cable 10 amps ZEC120



Zeca (5821XF) with 5.5m 4 x 2.5mm² cable 10 amps ZEC140

Zeca (5823XF) with 8m 4 x 1.5mm² cable 10 amps ZEC150

FLATFORM CABLE

4 core x 2.5mm² PVC 25 amps CAB425


PENDANT CABLE - DANGLEFLEX






TYPE 100

Track – 5m length 100/5 MET100

Splice Joint 1103 MET150

Support Hanger Bracket 102 MET105

Track to Track Support (500mm standard*) T100 MET103

Girder Clip TB100 MET140

End Stop (steel) 100P MET110

End Clamp (steel) 100/137E MET135

Flat Cable Trolley (steel) 100/137 MET115

Flat Cable Trolley (plastic) 100/50N MET120

Towing Attachment (steel) 100TA/S MET125

Towing Attachment (plastic) 100TA/N MET130

Suspension Trolley (steel) 100/237ST MET165

Roving Pendant Box Plug / Socket MPS100/16 MET155



PACIFIC MY-T-LIFT

The Pacific My-T-Lift is the perfect solution for the safe handling of heavy loads, up to 300kg. This 360°

telescopic job crane is designed for single handed operation and can be mounted on trucks, trailers,

pontoons and similar structures. It has the option of a manual winch which includes a 6 meters rope or a

12 or 24 volt electric winch, featuring a rope length of 12 meters.

Due to its design, the My-T-Lift has the capability to allow accurate placement of heavy loads, even in

confined space.

This product is made from high quality durable steel and has the option to fold down when not in use.

Features

360° manual radial slew; with slipper bearing thrust

race for ease of slewing motion.

Rugged structure with low maintenance powder

coated finish.

Folds down when not in use.

Allows accurate placement of heavy loads, even in

confined space.

Available with manual winch, 12 or 24 volt electric

winch.

Optional drum lifting sling available.

Specifications

Dimensions (in mm)

Pacific My-T-Lift

MODEL MYT300B MYT300M MYT300E MYT300F

Stock Code MYT300 MYT318 MYT312 MYT324


Rope Length (m) Nil 6 12 12

Winch Type Nil Manual brake 12V DC 24V DC

Net Weight (kg) 68 78 83 83

MODEL MYT300 BASE PLATE

A 1790 455

B 1490 379

C 1290 195

D 1110 70

E 920 123

F 1730 450

G 1330 -

H 2030 -

I 1510 -



PACIFIC MAGNETIC LIFTERS

Pacific Magnetic Lifters can be used in various industries for the lifting and moving of steel, engine parts,

semi-manufactured goods and moulds, Due to its magnetic force, there is no need to use slings, clamps

or other holding devices. This will eliminate the chance of damaging the lifted materials.

Features

The magnetic lifter features a breakaway force 3.5

times greater than the working load limit.

Weight capacities are available from 100kg to

6000kg.

No electricity needed which will increase product

safety. Once operated there is less than 1%

residual magnetism.

The simple switch and safety button design allows

for one handed operation.

Use of plate with high-carbon content will reduce

the absorbability to less than 50% of rated capacity.

Use of plate with high carbon content is not

recommended.

Specifications

Rate of Reduction Graph

MODEL PML-1 PML-3 PML-6 PML-10 PML-20 PML-30 PML-60

Stock Code MAG010 MAG030 MAG060 MAG100 MAG200 MAG300 MAG600


Cylindrical Carrying Capacity (kg) 50 150 300 500 800 1200 1800

Max. Break-away Force (kg) 350 1050 2100 3500 7000 10500 21000

Net Weight (kg) 3 10 24 50 125 240 440



Suitable Thickness of Plate (mm) > 25 > 35 > 40 > 50 > 60 > 80 > 120

Plate Material ≤45# steel ≤45# steel ≤45# steel ≤45# steel ≤45# steel ≤45# steel ≤45# steel

Carbon Content Low Low Low Low Low Low Low



Dimensions (in mm)


A 67 91 117 163 212 261 355

B 62 92 122 176 234 286 430

C 92 162 232 258 378 458 600

D 126 155 196 285 426 521



IKUSI REMOTE CONTROLS

Pacific Electric Hoists and Hitachi Electric Hoists are available with the following Ikusi remotes.

Transmitters: T70 1

High-sensitivity two-step push button

Multiband radio with Full-Duplex communication

High customisable

LCD display optional

External removable EEPROM SIM module

Easy and fast maintenance

High resistance to impacts

Frequency management

Battery power pack included

Model T70 1

Stock Code RRC007 - RRC008

Stop function Cat. 3 - PLd

Ingress protection IP65/NEMA4

Anti condensation system Na

Frequency band Multiband (400 – 930 MHz)

Main mechanisms (max. #) Pushbutton (6)

Auxillary mechanisms 3 position selector switch

Removable EEPROM External

Battery model BT06K

Battery life 10h

Operating temperature Range -20C + 70C (-4F + 158F)

Weight (with battery) grams 460

Harness Hand strap

Display 2x12 Char LCD

Range limiter yes

Associated receivers RO6/ R13/ R70

Functions of RRC007 Raise, lower, east, west, E/stop

Functions of RRC008 Raise, lower, east, west, north,

south, E/stop



RRC007/RRC008 & Battery Pack

Receivers: R06

Multiband radio with Full-Duplex communication

External LEDs for troubleshooting

Highly field-customisable

Removable EEPROM SIM module

Frequencies management against interferences

STOP: PLd, Category 3 according to EN ISO 13849-1

Easy and fast maintenance

Multi-feedback capability

6 digital outputs

Model R06

Stop function Cat. 3 - PLd

Ingress protection IP65/NEMA4

Frequency band Multiband (400 – 930 MHz)

AC power supply 24, 48 – 240 VAC or 12VDC

Antenna Internal

Removable EEPROM Internal

Signaling External

ON/ OFF outputs (max.) 6

ON/ OFF inputs (max.) 4

Analogue inputs (max.) 1

Max. output current 6A

Working temperature range -20C + 70C (-4F + 158F)

Weight (g) 640

Dimensions ( LxWxH mm) 151 x 129 x 61

Cable connection Yes

Associated transmitters T70/1, T70/1ATEX, IK2

The information shown is to be used as a guide only. Specifications are subject to change without notice.



Documents

Hoisting Equipment Catalogue I 20 April 2016 I 17 MB