St. Albans, Vermont 05478802-524-2113
AutoCAD SHX Text
PERMITS AND CODES: THIS CONTRACTOR SHALL OBTAIN AND PAY FOR ALL LICENSES AND PERMITS AND CONTRACTOR SHALL OBTAIN AND PAY FOR ALL LICENSES AND PERMITS AND CONTRACTOR SHALL OBTAIN AND PAY FOR ALL LICENSES AND PERMITS AND SHALL OBTAIN AND PAY FOR ALL LICENSES AND PERMITS AND SHALL OBTAIN AND PAY FOR ALL LICENSES AND PERMITS AND OBTAIN AND PAY FOR ALL LICENSES AND PERMITS AND OBTAIN AND PAY FOR ALL LICENSES AND PERMITS AND AND PAY FOR ALL LICENSES AND PERMITS AND AND PAY FOR ALL LICENSES AND PERMITS AND PAY FOR ALL LICENSES AND PERMITS AND PAY FOR ALL LICENSES AND PERMITS AND FOR ALL LICENSES AND PERMITS AND FOR ALL LICENSES AND PERMITS AND ALL LICENSES AND PERMITS AND ALL LICENSES AND PERMITS AND LICENSES AND PERMITS AND LICENSES AND PERMITS AND AND PERMITS AND AND PERMITS AND PERMITS AND PERMITS AND AND AND SHALL PAY FOR ALL FEES AND CHARGES FOR THE CONNECTION TO OUTSIDE PAY FOR ALL FEES AND CHARGES FOR THE CONNECTION TO OUTSIDE PAY FOR ALL FEES AND CHARGES FOR THE CONNECTION TO OUTSIDE FOR ALL FEES AND CHARGES FOR THE CONNECTION TO OUTSIDE FOR ALL FEES AND CHARGES FOR THE CONNECTION TO OUTSIDE ALL FEES AND CHARGES FOR THE CONNECTION TO OUTSIDE ALL FEES AND CHARGES FOR THE CONNECTION TO OUTSIDE FEES AND CHARGES FOR THE CONNECTION TO OUTSIDE FEES AND CHARGES FOR THE CONNECTION TO OUTSIDE AND CHARGES FOR THE CONNECTION TO OUTSIDE AND CHARGES FOR THE CONNECTION TO OUTSIDE CHARGES FOR THE CONNECTION TO OUTSIDE CHARGES FOR THE CONNECTION TO OUTSIDE FOR THE CONNECTION TO OUTSIDE FOR THE CONNECTION TO OUTSIDE THE CONNECTION TO OUTSIDE THE CONNECTION TO OUTSIDE CONNECTION TO OUTSIDE CONNECTION TO OUTSIDE TO OUTSIDE TO OUTSIDE OUTSIDE OUTSIDE SERVICES AND USE OF PROPERTY OTHER THAN THE SITE OF THE WORK FOR AND USE OF PROPERTY OTHER THAN THE SITE OF THE WORK FOR AND USE OF PROPERTY OTHER THAN THE SITE OF THE WORK FOR USE OF PROPERTY OTHER THAN THE SITE OF THE WORK FOR USE OF PROPERTY OTHER THAN THE SITE OF THE WORK FOR OF PROPERTY OTHER THAN THE SITE OF THE WORK FOR OF PROPERTY OTHER THAN THE SITE OF THE WORK FOR PROPERTY OTHER THAN THE SITE OF THE WORK FOR PROPERTY OTHER THAN THE SITE OF THE WORK FOR OTHER THAN THE SITE OF THE WORK FOR OTHER THAN THE SITE OF THE WORK FOR THAN THE SITE OF THE WORK FOR THAN THE SITE OF THE WORK FOR THE SITE OF THE WORK FOR THE SITE OF THE WORK FOR SITE OF THE WORK FOR SITE OF THE WORK FOR OF THE WORK FOR OF THE WORK FOR THE WORK FOR THE WORK FOR WORK FOR WORK FOR FOR FOR STORAGE OF MATERIALS OR OTHER PURPOSES. WORK UNDER THIS CONTRACT SHALL OF MATERIALS OR OTHER PURPOSES. WORK UNDER THIS CONTRACT SHALL OF MATERIALS OR OTHER PURPOSES. WORK UNDER THIS CONTRACT SHALL MATERIALS OR OTHER PURPOSES. WORK UNDER THIS CONTRACT SHALL MATERIALS OR OTHER PURPOSES. WORK UNDER THIS CONTRACT SHALL OR OTHER PURPOSES. WORK UNDER THIS CONTRACT SHALL OR OTHER PURPOSES. WORK UNDER THIS CONTRACT SHALL OTHER PURPOSES. WORK UNDER THIS CONTRACT SHALL OTHER PURPOSES. WORK UNDER THIS CONTRACT SHALL PURPOSES. WORK UNDER THIS CONTRACT SHALL PURPOSES. WORK UNDER THIS CONTRACT SHALL WORK UNDER THIS CONTRACT SHALL WORK UNDER THIS CONTRACT SHALL UNDER THIS CONTRACT SHALL UNDER THIS CONTRACT SHALL THIS CONTRACT SHALL THIS CONTRACT SHALL CONTRACT SHALL CONTRACT SHALL SHALL SHALL BE INSTALLED TO COMPLY STRICTLY WITH LATEST APPLICABLE EDITIONS OF STATE INSTALLED TO COMPLY STRICTLY WITH LATEST APPLICABLE EDITIONS OF STATE INSTALLED TO COMPLY STRICTLY WITH LATEST APPLICABLE EDITIONS OF STATE TO COMPLY STRICTLY WITH LATEST APPLICABLE EDITIONS OF STATE TO COMPLY STRICTLY WITH LATEST APPLICABLE EDITIONS OF STATE COMPLY STRICTLY WITH LATEST APPLICABLE EDITIONS OF STATE COMPLY STRICTLY WITH LATEST APPLICABLE EDITIONS OF STATE STRICTLY WITH LATEST APPLICABLE EDITIONS OF STATE STRICTLY WITH LATEST APPLICABLE EDITIONS OF STATE WITH LATEST APPLICABLE EDITIONS OF STATE WITH LATEST APPLICABLE EDITIONS OF STATE LATEST APPLICABLE EDITIONS OF STATE LATEST APPLICABLE EDITIONS OF STATE APPLICABLE EDITIONS OF STATE APPLICABLE EDITIONS OF STATE EDITIONS OF STATE EDITIONS OF STATE OF STATE OF STATE STATE STATE OF VERMONT BUILDING CODE, INCLUDING REGULATIONS AND REQUIREMENTS OF ALL VERMONT BUILDING CODE, INCLUDING REGULATIONS AND REQUIREMENTS OF ALL VERMONT BUILDING CODE, INCLUDING REGULATIONS AND REQUIREMENTS OF ALL BUILDING CODE, INCLUDING REGULATIONS AND REQUIREMENTS OF ALL BUILDING CODE, INCLUDING REGULATIONS AND REQUIREMENTS OF ALL CODE, INCLUDING REGULATIONS AND REQUIREMENTS OF ALL CODE, INCLUDING REGULATIONS AND REQUIREMENTS OF ALL INCLUDING REGULATIONS AND REQUIREMENTS OF ALL INCLUDING REGULATIONS AND REQUIREMENTS OF ALL REGULATIONS AND REQUIREMENTS OF ALL REGULATIONS AND REQUIREMENTS OF ALL AND REQUIREMENTS OF ALL AND REQUIREMENTS OF ALL REQUIREMENTS OF ALL REQUIREMENTS OF ALL OF ALL OF ALL ALL ALL MUNICIPAL, STATE, FEDERAL AND OTHER PUBLIC OR PRIVATE AUTHORITIES WHICH STATE, FEDERAL AND OTHER PUBLIC OR PRIVATE AUTHORITIES WHICH STATE, FEDERAL AND OTHER PUBLIC OR PRIVATE AUTHORITIES WHICH FEDERAL AND OTHER PUBLIC OR PRIVATE AUTHORITIES WHICH FEDERAL AND OTHER PUBLIC OR PRIVATE AUTHORITIES WHICH AND OTHER PUBLIC OR PRIVATE AUTHORITIES WHICH AND OTHER PUBLIC OR PRIVATE AUTHORITIES WHICH OTHER PUBLIC OR PRIVATE AUTHORITIES WHICH OTHER PUBLIC OR PRIVATE AUTHORITIES WHICH PUBLIC OR PRIVATE AUTHORITIES WHICH PUBLIC OR PRIVATE AUTHORITIES WHICH OR PRIVATE AUTHORITIES WHICH OR PRIVATE AUTHORITIES WHICH PRIVATE AUTHORITIES WHICH PRIVATE AUTHORITIES WHICH AUTHORITIES WHICH AUTHORITIES WHICH WHICH WHICH HAVE JURISDICTION. IN EACH CASE, CODES ARE MINIMUM REQUIREMENTS. ANSI JURISDICTION. IN EACH CASE, CODES ARE MINIMUM REQUIREMENTS. ANSI JURISDICTION. IN EACH CASE, CODES ARE MINIMUM REQUIREMENTS. ANSI IN EACH CASE, CODES ARE MINIMUM REQUIREMENTS. ANSI IN EACH CASE, CODES ARE MINIMUM REQUIREMENTS. ANSI IN EACH CASE, CODES ARE MINIMUM REQUIREMENTS. ANSI EACH CASE, CODES ARE MINIMUM REQUIREMENTS. ANSI EACH CASE, CODES ARE MINIMUM REQUIREMENTS. ANSI CASE, CODES ARE MINIMUM REQUIREMENTS. ANSI CASE, CODES ARE MINIMUM REQUIREMENTS. ANSI CODES ARE MINIMUM REQUIREMENTS. ANSI CODES ARE MINIMUM REQUIREMENTS. ANSI ARE MINIMUM REQUIREMENTS. ANSI ARE MINIMUM REQUIREMENTS. ANSI MINIMUM REQUIREMENTS. ANSI MINIMUM REQUIREMENTS. ANSI REQUIREMENTS. ANSI REQUIREMENTS. ANSI ANSI ANSI ANSI COMPLIANCE: COMPLY WITH APPLICABLE ANSI STANDARDS PERTAINING TO COMPLY WITH APPLICABLE ANSI STANDARDS PERTAINING TO COMPLY WITH APPLICABLE ANSI STANDARDS PERTAINING TO COMPLY WITH APPLICABLE ANSI STANDARDS PERTAINING TO WITH APPLICABLE ANSI STANDARDS PERTAINING TO WITH APPLICABLE ANSI STANDARDS PERTAINING TO APPLICABLE ANSI STANDARDS PERTAINING TO APPLICABLE ANSI STANDARDS PERTAINING TO ANSI STANDARDS PERTAINING TO ANSI STANDARDS PERTAINING TO STANDARDS PERTAINING TO STANDARDS PERTAINING TO PERTAINING TO PERTAINING TO TO TO MATERIALS, PRODUCTS AND INSTALLATION OF SOIL AND WASTE SYSTEMS AND PRODUCTS AND INSTALLATION OF SOIL AND WASTE SYSTEMS AND PRODUCTS AND INSTALLATION OF SOIL AND WASTE SYSTEMS AND AND INSTALLATION OF SOIL AND WASTE SYSTEMS AND AND INSTALLATION OF SOIL AND WASTE SYSTEMS AND INSTALLATION OF SOIL AND WASTE SYSTEMS AND INSTALLATION OF SOIL AND WASTE SYSTEMS AND OF SOIL AND WASTE SYSTEMS AND OF SOIL AND WASTE SYSTEMS AND SOIL AND WASTE SYSTEMS AND SOIL AND WASTE SYSTEMS AND AND WASTE SYSTEMS AND AND WASTE SYSTEMS AND WASTE SYSTEMS AND WASTE SYSTEMS AND SYSTEMS AND SYSTEMS AND AND AND PLUMBING FIXTURES. CONSTRUCT AND INSTALL BARRIER FREE PLUMBING FIXTURES FIXTURES. CONSTRUCT AND INSTALL BARRIER FREE PLUMBING FIXTURES FIXTURES. CONSTRUCT AND INSTALL BARRIER FREE PLUMBING FIXTURES CONSTRUCT AND INSTALL BARRIER FREE PLUMBING FIXTURES CONSTRUCT AND INSTALL BARRIER FREE PLUMBING FIXTURES CONSTRUCT AND INSTALL BARRIER FREE PLUMBING FIXTURES AND INSTALL BARRIER FREE PLUMBING FIXTURES AND INSTALL BARRIER FREE PLUMBING FIXTURES INSTALL BARRIER FREE PLUMBING FIXTURES INSTALL BARRIER FREE PLUMBING FIXTURES BARRIER FREE PLUMBING FIXTURES BARRIER FREE PLUMBING FIXTURES FREE PLUMBING FIXTURES FREE PLUMBING FIXTURES PLUMBING FIXTURES PLUMBING FIXTURES FIXTURES FIXTURES IN ACCORDANCE WITH ANSI STANDARD A117.1, "SPECIFICATIONS FOR MAKING ACCORDANCE WITH ANSI STANDARD A117.1, "SPECIFICATIONS FOR MAKING ACCORDANCE WITH ANSI STANDARD A117.1, "SPECIFICATIONS FOR MAKING WITH ANSI STANDARD A117.1, "SPECIFICATIONS FOR MAKING WITH ANSI STANDARD A117.1, "SPECIFICATIONS FOR MAKING ANSI STANDARD A117.1, "SPECIFICATIONS FOR MAKING ANSI STANDARD A117.1, "SPECIFICATIONS FOR MAKING STANDARD A117.1, "SPECIFICATIONS FOR MAKING STANDARD A117.1, "SPECIFICATIONS FOR MAKING A117.1, "SPECIFICATIONS FOR MAKING A117.1, "SPECIFICATIONS FOR MAKING "SPECIFICATIONS FOR MAKING "SPECIFICATIONS FOR MAKING FOR MAKING FOR MAKING MAKING MAKING BUILDINGS AND FACILITIES ACCESSIBLE TO AND USABLE BY PHYSICALLY AND FACILITIES ACCESSIBLE TO AND USABLE BY PHYSICALLY AND FACILITIES ACCESSIBLE TO AND USABLE BY PHYSICALLY FACILITIES ACCESSIBLE TO AND USABLE BY PHYSICALLY FACILITIES ACCESSIBLE TO AND USABLE BY PHYSICALLY ACCESSIBLE TO AND USABLE BY PHYSICALLY ACCESSIBLE TO AND USABLE BY PHYSICALLY TO AND USABLE BY PHYSICALLY TO AND USABLE BY PHYSICALLY AND USABLE BY PHYSICALLY AND USABLE BY PHYSICALLY USABLE BY PHYSICALLY USABLE BY PHYSICALLY BY PHYSICALLY BY PHYSICALLY PHYSICALLY PHYSICALLY HANDICAPPED PEOPLE". ADA COMPLIANCE: COMPLY WITH ALL REQUIREMENTS OF PEOPLE". ADA COMPLIANCE: COMPLY WITH ALL REQUIREMENTS OF PEOPLE". ADA COMPLIANCE: COMPLY WITH ALL REQUIREMENTS OF ADA COMPLIANCE: COMPLY WITH ALL REQUIREMENTS OF ADA COMPLIANCE: COMPLY WITH ALL REQUIREMENTS OF COMPLIANCE: COMPLY WITH ALL REQUIREMENTS OF COMPLIANCE: COMPLY WITH ALL REQUIREMENTS OF COMPLY WITH ALL REQUIREMENTS OF COMPLY WITH ALL REQUIREMENTS OF COMPLY WITH ALL REQUIREMENTS OF WITH ALL REQUIREMENTS OF WITH ALL REQUIREMENTS OF ALL REQUIREMENTS OF ALL REQUIREMENTS OF REQUIREMENTS OF REQUIREMENTS OF OF OF AMERICANS WITH DISABILITIES ACT FOR INSTALLATION OF PLUMBING FIXTURES WHERE WITH DISABILITIES ACT FOR INSTALLATION OF PLUMBING FIXTURES WHERE WITH DISABILITIES ACT FOR INSTALLATION OF PLUMBING FIXTURES WHERE DISABILITIES ACT FOR INSTALLATION OF PLUMBING FIXTURES WHERE DISABILITIES ACT FOR INSTALLATION OF PLUMBING FIXTURES WHERE ACT FOR INSTALLATION OF PLUMBING FIXTURES WHERE ACT FOR INSTALLATION OF PLUMBING FIXTURES WHERE FOR INSTALLATION OF PLUMBING FIXTURES WHERE FOR INSTALLATION OF PLUMBING FIXTURES WHERE INSTALLATION OF PLUMBING FIXTURES WHERE INSTALLATION OF PLUMBING FIXTURES WHERE OF PLUMBING FIXTURES WHERE OF PLUMBING FIXTURES WHERE PLUMBING FIXTURES WHERE PLUMBING FIXTURES WHERE FIXTURES WHERE FIXTURES WHERE WHERE WHERE REQUIRED TO COMPLY. SHOP DRAWINGS: SUBMIT SHOP DRAWINGS ON ALL MAJOR ITEMS OF EQUIPMENT AND MATERIALS TO SHOP DRAWINGS ON ALL MAJOR ITEMS OF EQUIPMENT AND MATERIALS TO SHOP DRAWINGS ON ALL MAJOR ITEMS OF EQUIPMENT AND MATERIALS TO DRAWINGS ON ALL MAJOR ITEMS OF EQUIPMENT AND MATERIALS TO DRAWINGS ON ALL MAJOR ITEMS OF EQUIPMENT AND MATERIALS TO ON ALL MAJOR ITEMS OF EQUIPMENT AND MATERIALS TO ON ALL MAJOR ITEMS OF EQUIPMENT AND MATERIALS TO ALL MAJOR ITEMS OF EQUIPMENT AND MATERIALS TO ALL MAJOR ITEMS OF EQUIPMENT AND MATERIALS TO MAJOR ITEMS OF EQUIPMENT AND MATERIALS TO MAJOR ITEMS OF EQUIPMENT AND MATERIALS TO ITEMS OF EQUIPMENT AND MATERIALS TO ITEMS OF EQUIPMENT AND MATERIALS TO OF EQUIPMENT AND MATERIALS TO OF EQUIPMENT AND MATERIALS TO EQUIPMENT AND MATERIALS TO EQUIPMENT AND MATERIALS TO AND MATERIALS TO AND MATERIALS TO MATERIALS TO MATERIALS TO TO TO THE ARCHITECT FOR APPROVAL. MANUFACTURING OR FABRICATING OF ANY ARCHITECT FOR APPROVAL. MANUFACTURING OR FABRICATING OF ANY ARCHITECT FOR APPROVAL. MANUFACTURING OR FABRICATING OF ANY FOR APPROVAL. MANUFACTURING OR FABRICATING OF ANY FOR APPROVAL. MANUFACTURING OR FABRICATING OF ANY APPROVAL. MANUFACTURING OR FABRICATING OF ANY APPROVAL. MANUFACTURING OR FABRICATING OF ANY MANUFACTURING OR FABRICATING OF ANY MANUFACTURING OR FABRICATING OF ANY MANUFACTURING OR FABRICATING OF ANY OR FABRICATING OF ANY OR FABRICATING OF ANY FABRICATING OF ANY FABRICATING OF ANY OF ANY OF ANY ANY ANY MATERIAL OR THE PERFORMING OF ANY WORK PRIOR TO APPROVAL OF SHOP OR THE PERFORMING OF ANY WORK PRIOR TO APPROVAL OF SHOP OR THE PERFORMING OF ANY WORK PRIOR TO APPROVAL OF SHOP THE PERFORMING OF ANY WORK PRIOR TO APPROVAL OF SHOP THE PERFORMING OF ANY WORK PRIOR TO APPROVAL OF SHOP PERFORMING OF ANY WORK PRIOR TO APPROVAL OF SHOP PERFORMING OF ANY WORK PRIOR TO APPROVAL OF SHOP OF ANY WORK PRIOR TO APPROVAL OF SHOP OF ANY WORK PRIOR TO APPROVAL OF SHOP ANY WORK PRIOR TO APPROVAL OF SHOP ANY WORK PRIOR TO APPROVAL OF SHOP WORK PRIOR TO APPROVAL OF SHOP WORK PRIOR TO APPROVAL OF SHOP PRIOR TO APPROVAL OF SHOP PRIOR TO APPROVAL OF SHOP TO APPROVAL OF SHOP TO APPROVAL OF SHOP APPROVAL OF SHOP APPROVAL OF SHOP OF SHOP OF SHOP SHOP SHOP DRAWINGS WILL BE ENTIRELY AT THE RISK OF THE CONTRACTOR. SHOP DRAWINGS WILL BE ENTIRELY AT THE RISK OF THE CONTRACTOR. SHOP DRAWINGS WILL BE ENTIRELY AT THE RISK OF THE CONTRACTOR. SHOP DRAWINGS BE ENTIRELY AT THE RISK OF THE CONTRACTOR. SHOP DRAWINGS BE ENTIRELY AT THE RISK OF THE CONTRACTOR. SHOP DRAWINGS ENTIRELY AT THE RISK OF THE CONTRACTOR. SHOP DRAWINGS ENTIRELY AT THE RISK OF THE CONTRACTOR. SHOP DRAWINGS AT THE RISK OF THE CONTRACTOR. SHOP DRAWINGS AT THE RISK OF THE CONTRACTOR. SHOP DRAWINGS THE RISK OF THE CONTRACTOR. SHOP DRAWINGS THE RISK OF THE CONTRACTOR. SHOP DRAWINGS RISK OF THE CONTRACTOR. SHOP DRAWINGS RISK OF THE CONTRACTOR. SHOP DRAWINGS OF THE CONTRACTOR. SHOP DRAWINGS OF THE CONTRACTOR. SHOP DRAWINGS THE CONTRACTOR. SHOP DRAWINGS THE CONTRACTOR. SHOP DRAWINGS CONTRACTOR. SHOP DRAWINGS CONTRACTOR. SHOP DRAWINGS SHOP DRAWINGS SHOP DRAWINGS DRAWINGS DRAWINGS SHALL BE SUBMITTED WITHIN THIRTY (30) DAYS AFTER AWARD OF CONTRACT. BE SUBMITTED WITHIN THIRTY (30) DAYS AFTER AWARD OF CONTRACT. BE SUBMITTED WITHIN THIRTY (30) DAYS AFTER AWARD OF CONTRACT. SUBMITTED WITHIN THIRTY (30) DAYS AFTER AWARD OF CONTRACT. SUBMITTED WITHIN THIRTY (30) DAYS AFTER AWARD OF CONTRACT. WITHIN THIRTY (30) DAYS AFTER AWARD OF CONTRACT. WITHIN THIRTY (30) DAYS AFTER AWARD OF CONTRACT. THIRTY (30) DAYS AFTER AWARD OF CONTRACT. THIRTY (30) DAYS AFTER AWARD OF CONTRACT. (30) DAYS AFTER AWARD OF CONTRACT. (30) DAYS AFTER AWARD OF CONTRACT. DAYS AFTER AWARD OF CONTRACT. DAYS AFTER AWARD OF CONTRACT. AFTER AWARD OF CONTRACT. AFTER AWARD OF CONTRACT. AWARD OF CONTRACT. AWARD OF CONTRACT. OF CONTRACT. OF CONTRACT. CONTRACT. CONTRACT. APPROVAL RENDERED ON SHOP DRAWINGS SHALL NOT BE CONSIDERED AS A RENDERED ON SHOP DRAWINGS SHALL NOT BE CONSIDERED AS A RENDERED ON SHOP DRAWINGS SHALL NOT BE CONSIDERED AS A ON SHOP DRAWINGS SHALL NOT BE CONSIDERED AS A ON SHOP DRAWINGS SHALL NOT BE CONSIDERED AS A SHOP DRAWINGS SHALL NOT BE CONSIDERED AS A SHOP DRAWINGS SHALL NOT BE CONSIDERED AS A DRAWINGS SHALL NOT BE CONSIDERED AS A DRAWINGS SHALL NOT BE CONSIDERED AS A SHALL NOT BE CONSIDERED AS A SHALL NOT BE CONSIDERED AS A NOT BE CONSIDERED AS A NOT BE CONSIDERED AS A BE CONSIDERED AS A BE CONSIDERED AS A CONSIDERED AS A CONSIDERED AS A AS A AS A A A GUARANTEE OF MEASUREMENTS OR BUILDING CONDITIONS. WHERE DRAWINGS ARE OF MEASUREMENTS OR BUILDING CONDITIONS. WHERE DRAWINGS ARE OF MEASUREMENTS OR BUILDING CONDITIONS. WHERE DRAWINGS ARE MEASUREMENTS OR BUILDING CONDITIONS. WHERE DRAWINGS ARE MEASUREMENTS OR BUILDING CONDITIONS. WHERE DRAWINGS ARE OR BUILDING CONDITIONS. WHERE DRAWINGS ARE OR BUILDING CONDITIONS. WHERE DRAWINGS ARE BUILDING CONDITIONS. WHERE DRAWINGS ARE BUILDING CONDITIONS. WHERE DRAWINGS ARE CONDITIONS. WHERE DRAWINGS ARE CONDITIONS. WHERE DRAWINGS ARE WHERE DRAWINGS ARE WHERE DRAWINGS ARE WHERE DRAWINGS ARE DRAWINGS ARE DRAWINGS ARE ARE ARE APPROVED, SAID APPROVAL DOES NOT MEAN THAT DRAWINGS HAVE BEEN CHECKED SAID APPROVAL DOES NOT MEAN THAT DRAWINGS HAVE BEEN CHECKED SAID APPROVAL DOES NOT MEAN THAT DRAWINGS HAVE BEEN CHECKED APPROVAL DOES NOT MEAN THAT DRAWINGS HAVE BEEN CHECKED APPROVAL DOES NOT MEAN THAT DRAWINGS HAVE BEEN CHECKED DOES NOT MEAN THAT DRAWINGS HAVE BEEN CHECKED DOES NOT MEAN THAT DRAWINGS HAVE BEEN CHECKED NOT MEAN THAT DRAWINGS HAVE BEEN CHECKED NOT MEAN THAT DRAWINGS HAVE BEEN CHECKED MEAN THAT DRAWINGS HAVE BEEN CHECKED MEAN THAT DRAWINGS HAVE BEEN CHECKED THAT DRAWINGS HAVE BEEN CHECKED THAT DRAWINGS HAVE BEEN CHECKED DRAWINGS HAVE BEEN CHECKED DRAWINGS HAVE BEEN CHECKED HAVE BEEN CHECKED HAVE BEEN CHECKED BEEN CHECKED BEEN CHECKED CHECKED CHECKED IN DETAIL; SAID APPROVAL DOES NOT IN ANY WAY RELIEVE THE CONTRACTOR FROM DETAIL; SAID APPROVAL DOES NOT IN ANY WAY RELIEVE THE CONTRACTOR FROM DETAIL; SAID APPROVAL DOES NOT IN ANY WAY RELIEVE THE CONTRACTOR FROM SAID APPROVAL DOES NOT IN ANY WAY RELIEVE THE CONTRACTOR FROM SAID APPROVAL DOES NOT IN ANY WAY RELIEVE THE CONTRACTOR FROM APPROVAL DOES NOT IN ANY WAY RELIEVE THE CONTRACTOR FROM APPROVAL DOES NOT IN ANY WAY RELIEVE THE CONTRACTOR FROM DOES NOT IN ANY WAY RELIEVE THE CONTRACTOR FROM DOES NOT IN ANY WAY RELIEVE THE CONTRACTOR FROM NOT IN ANY WAY RELIEVE THE CONTRACTOR FROM NOT IN ANY WAY RELIEVE THE CONTRACTOR FROM IN ANY WAY RELIEVE THE CONTRACTOR FROM IN ANY WAY RELIEVE THE CONTRACTOR FROM ANY WAY RELIEVE THE CONTRACTOR FROM ANY WAY RELIEVE THE CONTRACTOR FROM WAY RELIEVE THE CONTRACTOR FROM WAY RELIEVE THE CONTRACTOR FROM RELIEVE THE CONTRACTOR FROM RELIEVE THE CONTRACTOR FROM THE CONTRACTOR FROM THE CONTRACTOR FROM CONTRACTOR FROM CONTRACTOR FROM FROM FROM NEITHER HIS RESPONSIBILITY NOR THE NECESSITY OF FURNISHING MATERIAL OR HIS RESPONSIBILITY NOR THE NECESSITY OF FURNISHING MATERIAL OR HIS RESPONSIBILITY NOR THE NECESSITY OF FURNISHING MATERIAL OR RESPONSIBILITY NOR THE NECESSITY OF FURNISHING MATERIAL OR RESPONSIBILITY NOR THE NECESSITY OF FURNISHING MATERIAL OR NOR THE NECESSITY OF FURNISHING MATERIAL OR NOR THE NECESSITY OF FURNISHING MATERIAL OR THE NECESSITY OF FURNISHING MATERIAL OR THE NECESSITY OF FURNISHING MATERIAL OR NECESSITY OF FURNISHING MATERIAL OR NECESSITY OF FURNISHING MATERIAL OR OF FURNISHING MATERIAL OR OF FURNISHING MATERIAL OR FURNISHING MATERIAL OR FURNISHING MATERIAL OR MATERIAL OR MATERIAL OR OR OR PERFORMING WORK REQUIRED BY THE CONTRACT DRAWINGS AND SPECIFICATIONS. WORK REQUIRED BY THE CONTRACT DRAWINGS AND SPECIFICATIONS. WORK REQUIRED BY THE CONTRACT DRAWINGS AND SPECIFICATIONS. REQUIRED BY THE CONTRACT DRAWINGS AND SPECIFICATIONS. REQUIRED BY THE CONTRACT DRAWINGS AND SPECIFICATIONS. BY THE CONTRACT DRAWINGS AND SPECIFICATIONS. BY THE CONTRACT DRAWINGS AND SPECIFICATIONS. THE CONTRACT DRAWINGS AND SPECIFICATIONS. THE CONTRACT DRAWINGS AND SPECIFICATIONS. CONTRACT DRAWINGS AND SPECIFICATIONS. CONTRACT DRAWINGS AND SPECIFICATIONS. DRAWINGS AND SPECIFICATIONS. DRAWINGS AND SPECIFICATIONS. AND SPECIFICATIONS. AND SPECIFICATIONS. SPECIFICATIONS. SPECIFICATIONS. SUBMIT COMPLETE AND DIMENSIONED “AS-BUILT” PLANS FOR ALL TRADES COMPLETE AND DIMENSIONED “AS-BUILT” PLANS FOR ALL TRADES COMPLETE AND DIMENSIONED “AS-BUILT” PLANS FOR ALL TRADES AND DIMENSIONED “AS-BUILT” PLANS FOR ALL TRADES AND DIMENSIONED “AS-BUILT” PLANS FOR ALL TRADES DIMENSIONED “AS-BUILT” PLANS FOR ALL TRADES DIMENSIONED “AS-BUILT” PLANS FOR ALL TRADES “AS-BUILT” PLANS FOR ALL TRADES AS-BUILT” PLANS FOR ALL TRADES PLANS FOR ALL TRADES PLANS FOR ALL TRADES FOR ALL TRADES FOR ALL TRADES ALL TRADES ALL TRADES TRADES TRADES INDICATING ACTUAL INSTALLED CONDITIONS. PLANS SHALL BE ENTIRELY NEAT, ACTUAL INSTALLED CONDITIONS. PLANS SHALL BE ENTIRELY NEAT, ACTUAL INSTALLED CONDITIONS. PLANS SHALL BE ENTIRELY NEAT, INSTALLED CONDITIONS. PLANS SHALL BE ENTIRELY NEAT, INSTALLED CONDITIONS. PLANS SHALL BE ENTIRELY NEAT, CONDITIONS. PLANS SHALL BE ENTIRELY NEAT, CONDITIONS. PLANS SHALL BE ENTIRELY NEAT, PLANS SHALL BE ENTIRELY NEAT, PLANS SHALL BE ENTIRELY NEAT, PLANS SHALL BE ENTIRELY NEAT, SHALL BE ENTIRELY NEAT, SHALL BE ENTIRELY NEAT, BE ENTIRELY NEAT, BE ENTIRELY NEAT, ENTIRELY NEAT, ENTIRELY NEAT, NEAT, NEAT, LEGIBLE AND ACCURATE. GUARANTEE, SERVICE AND REPLACEMENT: EXCEPT AS A LONGER PERIOD MAY BE PROVIDED IN THIS SPECIFICATION, THIS AS A LONGER PERIOD MAY BE PROVIDED IN THIS SPECIFICATION, THIS AS A LONGER PERIOD MAY BE PROVIDED IN THIS SPECIFICATION, THIS A LONGER PERIOD MAY BE PROVIDED IN THIS SPECIFICATION, THIS A LONGER PERIOD MAY BE PROVIDED IN THIS SPECIFICATION, THIS LONGER PERIOD MAY BE PROVIDED IN THIS SPECIFICATION, THIS LONGER PERIOD MAY BE PROVIDED IN THIS SPECIFICATION, THIS PERIOD MAY BE PROVIDED IN THIS SPECIFICATION, THIS PERIOD MAY BE PROVIDED IN THIS SPECIFICATION, THIS MAY BE PROVIDED IN THIS SPECIFICATION, THIS MAY BE PROVIDED IN THIS SPECIFICATION, THIS BE PROVIDED IN THIS SPECIFICATION, THIS BE PROVIDED IN THIS SPECIFICATION, THIS PROVIDED IN THIS SPECIFICATION, THIS PROVIDED IN THIS SPECIFICATION, THIS IN THIS SPECIFICATION, THIS IN THIS SPECIFICATION, THIS THIS SPECIFICATION, THIS THIS SPECIFICATION, THIS SPECIFICATION, THIS SPECIFICATION, THIS THIS THIS CONTRACTOR SHALL GUARANTEE THE WORK TO THE FULL EXTENT OF THE PROVISION SHALL GUARANTEE THE WORK TO THE FULL EXTENT OF THE PROVISION SHALL GUARANTEE THE WORK TO THE FULL EXTENT OF THE PROVISION GUARANTEE THE WORK TO THE FULL EXTENT OF THE PROVISION GUARANTEE THE WORK TO THE FULL EXTENT OF THE PROVISION THE WORK TO THE FULL EXTENT OF THE PROVISION THE WORK TO THE FULL EXTENT OF THE PROVISION WORK TO THE FULL EXTENT OF THE PROVISION WORK TO THE FULL EXTENT OF THE PROVISION TO THE FULL EXTENT OF THE PROVISION TO THE FULL EXTENT OF THE PROVISION THE FULL EXTENT OF THE PROVISION THE FULL EXTENT OF THE PROVISION FULL EXTENT OF THE PROVISION FULL EXTENT OF THE PROVISION EXTENT OF THE PROVISION EXTENT OF THE PROVISION OF THE PROVISION OF THE PROVISION THE PROVISION THE PROVISION PROVISION PROVISION OF THE DRAWINGS, THIS SPECIFICATION AND THE GENERAL CONDITIONS FOR A THE DRAWINGS, THIS SPECIFICATION AND THE GENERAL CONDITIONS FOR A THE DRAWINGS, THIS SPECIFICATION AND THE GENERAL CONDITIONS FOR A DRAWINGS, THIS SPECIFICATION AND THE GENERAL CONDITIONS FOR A DRAWINGS, THIS SPECIFICATION AND THE GENERAL CONDITIONS FOR A THIS SPECIFICATION AND THE GENERAL CONDITIONS FOR A THIS SPECIFICATION AND THE GENERAL CONDITIONS FOR A SPECIFICATION AND THE GENERAL CONDITIONS FOR A SPECIFICATION AND THE GENERAL CONDITIONS FOR A AND THE GENERAL CONDITIONS FOR A AND THE GENERAL CONDITIONS FOR A THE GENERAL CONDITIONS FOR A THE GENERAL CONDITIONS FOR A GENERAL CONDITIONS FOR A GENERAL CONDITIONS FOR A CONDITIONS FOR A CONDITIONS FOR A FOR A FOR A A A PERIOD OF ONE (1) YEAR FROM THE DATE OF FINAL ACCEPTANCE BY THE OF ONE (1) YEAR FROM THE DATE OF FINAL ACCEPTANCE BY THE OF ONE (1) YEAR FROM THE DATE OF FINAL ACCEPTANCE BY THE ONE (1) YEAR FROM THE DATE OF FINAL ACCEPTANCE BY THE ONE (1) YEAR FROM THE DATE OF FINAL ACCEPTANCE BY THE (1) YEAR FROM THE DATE OF FINAL ACCEPTANCE BY THE (1) YEAR FROM THE DATE OF FINAL ACCEPTANCE BY THE YEAR FROM THE DATE OF FINAL ACCEPTANCE BY THE YEAR FROM THE DATE OF FINAL ACCEPTANCE BY THE FROM THE DATE OF FINAL ACCEPTANCE BY THE FROM THE DATE OF FINAL ACCEPTANCE BY THE THE DATE OF FINAL ACCEPTANCE BY THE THE DATE OF FINAL ACCEPTANCE BY THE DATE OF FINAL ACCEPTANCE BY THE DATE OF FINAL ACCEPTANCE BY THE OF FINAL ACCEPTANCE BY THE OF FINAL ACCEPTANCE BY THE FINAL ACCEPTANCE BY THE FINAL ACCEPTANCE BY THE ACCEPTANCE BY THE ACCEPTANCE BY THE BY THE BY THE THE THE ARCHITECT AS EVIDENCED BY THE ARCHITECT'S FINAL CERTIFICATES. THIS AS EVIDENCED BY THE ARCHITECT'S FINAL CERTIFICATES. THIS AS EVIDENCED BY THE ARCHITECT'S FINAL CERTIFICATES. THIS EVIDENCED BY THE ARCHITECT'S FINAL CERTIFICATES. THIS EVIDENCED BY THE ARCHITECT'S FINAL CERTIFICATES. THIS BY THE ARCHITECT'S FINAL CERTIFICATES. THIS BY THE ARCHITECT'S FINAL CERTIFICATES. THIS THE ARCHITECT'S FINAL CERTIFICATES. THIS THE ARCHITECT'S FINAL CERTIFICATES. THIS ARCHITECT'S FINAL CERTIFICATES. THIS ARCHITECT'S FINAL CERTIFICATES. THIS FINAL CERTIFICATES. THIS FINAL CERTIFICATES. THIS CERTIFICATES. THIS CERTIFICATES. THIS THIS THIS CONTRACTOR SHALL SERVICE ALL INSTALLED EQUIPMENT FREE OF CHARGE DURING SHALL SERVICE ALL INSTALLED EQUIPMENT FREE OF CHARGE DURING SHALL SERVICE ALL INSTALLED EQUIPMENT FREE OF CHARGE DURING SERVICE ALL INSTALLED EQUIPMENT FREE OF CHARGE DURING SERVICE ALL INSTALLED EQUIPMENT FREE OF CHARGE DURING ALL INSTALLED EQUIPMENT FREE OF CHARGE DURING ALL INSTALLED EQUIPMENT FREE OF CHARGE DURING INSTALLED EQUIPMENT FREE OF CHARGE DURING INSTALLED EQUIPMENT FREE OF CHARGE DURING EQUIPMENT FREE OF CHARGE DURING EQUIPMENT FREE OF CHARGE DURING FREE OF CHARGE DURING FREE OF CHARGE DURING OF CHARGE DURING OF CHARGE DURING CHARGE DURING CHARGE DURING DURING DURING THE GUARANTEE PERIOD. ANY APPARATUS OR EQUIPMENT THAT REQUIRES EXCESSIVE GUARANTEE PERIOD. ANY APPARATUS OR EQUIPMENT THAT REQUIRES EXCESSIVE GUARANTEE PERIOD. ANY APPARATUS OR EQUIPMENT THAT REQUIRES EXCESSIVE PERIOD. ANY APPARATUS OR EQUIPMENT THAT REQUIRES EXCESSIVE PERIOD. ANY APPARATUS OR EQUIPMENT THAT REQUIRES EXCESSIVE ANY APPARATUS OR EQUIPMENT THAT REQUIRES EXCESSIVE ANY APPARATUS OR EQUIPMENT THAT REQUIRES EXCESSIVE APPARATUS OR EQUIPMENT THAT REQUIRES EXCESSIVE APPARATUS OR EQUIPMENT THAT REQUIRES EXCESSIVE OR EQUIPMENT THAT REQUIRES EXCESSIVE OR EQUIPMENT THAT REQUIRES EXCESSIVE EQUIPMENT THAT REQUIRES EXCESSIVE EQUIPMENT THAT REQUIRES EXCESSIVE THAT REQUIRES EXCESSIVE THAT REQUIRES EXCESSIVE REQUIRES EXCESSIVE REQUIRES EXCESSIVE EXCESSIVE EXCESSIVE SERVICE DURING THE GUARANTEE PERIOD SHALL BE CONSIDERED DEFECTIVE AND DURING THE GUARANTEE PERIOD SHALL BE CONSIDERED DEFECTIVE AND DURING THE GUARANTEE PERIOD SHALL BE CONSIDERED DEFECTIVE AND THE GUARANTEE PERIOD SHALL BE CONSIDERED DEFECTIVE AND THE GUARANTEE PERIOD SHALL BE CONSIDERED DEFECTIVE AND GUARANTEE PERIOD SHALL BE CONSIDERED DEFECTIVE AND GUARANTEE PERIOD SHALL BE CONSIDERED DEFECTIVE AND PERIOD SHALL BE CONSIDERED DEFECTIVE AND PERIOD SHALL BE CONSIDERED DEFECTIVE AND SHALL BE CONSIDERED DEFECTIVE AND SHALL BE CONSIDERED DEFECTIVE AND BE CONSIDERED DEFECTIVE AND BE CONSIDERED DEFECTIVE AND CONSIDERED DEFECTIVE AND CONSIDERED DEFECTIVE AND DEFECTIVE AND DEFECTIVE AND AND AND SHALL BE REPLACED BY THIS CONTRACTOR WITHOUT ADDITIONAL COST TO OWNER. GENERAL SCOPE OF WORK: REMOVE AND REPLACE PLUMBING FIXTURES AS INDICATED ON THE DRAWINGS, INCLUDING ALL ASSOCIATED SANITARY WASTE AND VENT PIPING, DOMESTIC WATER PIPING, AND ALL ACCESSORIES. PROVIDE NEW PLUMBING FIXTURES AS INDICATED ON THE DRAWINGS, INCLUDING ALL ASSOCIATED SANITARY WASTE AND VENT PIPING, DOMESTIC WATER PIPING, AND ALL ACCESSORIES. CONNECT TO THE EXISTING DOMESTIC WATER AND SANITARY WASTE AND VENT SYSTEM. REMOVE AND RELOCATE HYDRONIC PANEL RADIATORS AS INDICATED ON THE DRAWINGS. REMOVE AND RELOCATE EXISTING ROOM THERMOSTATS WHERE INDICATED ON THE DRAWINGS. REMOVE AND REPLACE EXISTING DOMESTIC WATER PIPING AS INDICATED ON THE AND REPLACE EXISTING DOMESTIC WATER PIPING AS INDICATED ON THE AND REPLACE EXISTING DOMESTIC WATER PIPING AS INDICATED ON THE REPLACE EXISTING DOMESTIC WATER PIPING AS INDICATED ON THE REPLACE EXISTING DOMESTIC WATER PIPING AS INDICATED ON THE EXISTING DOMESTIC WATER PIPING AS INDICATED ON THE EXISTING DOMESTIC WATER PIPING AS INDICATED ON THE DOMESTIC WATER PIPING AS INDICATED ON THE DOMESTIC WATER PIPING AS INDICATED ON THE WATER PIPING AS INDICATED ON THE WATER PIPING AS INDICATED ON THE PIPING AS INDICATED ON THE PIPING AS INDICATED ON THE AS INDICATED ON THE AS INDICATED ON THE INDICATED ON THE INDICATED ON THE ON THE ON THE THE THE DRAWINGS. PIPE HANGERS AND SUPPORTS: ALL PIPING SHALL BE RIGIDLY SUPPORTED FROM THE BUILDING STRUCTURE BY PIPING SHALL BE RIGIDLY SUPPORTED FROM THE BUILDING STRUCTURE BY PIPING SHALL BE RIGIDLY SUPPORTED FROM THE BUILDING STRUCTURE BY SHALL BE RIGIDLY SUPPORTED FROM THE BUILDING STRUCTURE BY SHALL BE RIGIDLY SUPPORTED FROM THE BUILDING STRUCTURE BY BE RIGIDLY SUPPORTED FROM THE BUILDING STRUCTURE BY BE RIGIDLY SUPPORTED FROM THE BUILDING STRUCTURE BY RIGIDLY SUPPORTED FROM THE BUILDING STRUCTURE BY RIGIDLY SUPPORTED FROM THE BUILDING STRUCTURE BY SUPPORTED FROM THE BUILDING STRUCTURE BY SUPPORTED FROM THE BUILDING STRUCTURE BY FROM THE BUILDING STRUCTURE BY FROM THE BUILDING STRUCTURE BY THE BUILDING STRUCTURE BY THE BUILDING STRUCTURE BY BUILDING STRUCTURE BY BUILDING STRUCTURE BY STRUCTURE BY STRUCTURE BY BY BY MEANS OF APPROVED HANGERS AND SUPPORTS. THIS CONTRACTOR SHALL FURNISH OF APPROVED HANGERS AND SUPPORTS. THIS CONTRACTOR SHALL FURNISH OF APPROVED HANGERS AND SUPPORTS. THIS CONTRACTOR SHALL FURNISH APPROVED HANGERS AND SUPPORTS. THIS CONTRACTOR SHALL FURNISH APPROVED HANGERS AND SUPPORTS. THIS CONTRACTOR SHALL FURNISH HANGERS AND SUPPORTS. THIS CONTRACTOR SHALL FURNISH HANGERS AND SUPPORTS. THIS CONTRACTOR SHALL FURNISH AND SUPPORTS. THIS CONTRACTOR SHALL FURNISH AND SUPPORTS. THIS CONTRACTOR SHALL FURNISH SUPPORTS. THIS CONTRACTOR SHALL FURNISH SUPPORTS. THIS CONTRACTOR SHALL FURNISH THIS CONTRACTOR SHALL FURNISH THIS CONTRACTOR SHALL FURNISH THIS CONTRACTOR SHALL FURNISH CONTRACTOR SHALL FURNISH CONTRACTOR SHALL FURNISH SHALL FURNISH SHALL FURNISH FURNISH FURNISH AND INSTALL ALL NECESSARY INTERMEDIATE SUPPORT STEEL AND THE PROPER INSTALL ALL NECESSARY INTERMEDIATE SUPPORT STEEL AND THE PROPER INSTALL ALL NECESSARY INTERMEDIATE SUPPORT STEEL AND THE PROPER ALL NECESSARY INTERMEDIATE SUPPORT STEEL AND THE PROPER ALL NECESSARY INTERMEDIATE SUPPORT STEEL AND THE PROPER NECESSARY INTERMEDIATE SUPPORT STEEL AND THE PROPER NECESSARY INTERMEDIATE SUPPORT STEEL AND THE PROPER INTERMEDIATE SUPPORT STEEL AND THE PROPER INTERMEDIATE SUPPORT STEEL AND THE PROPER SUPPORT STEEL AND THE PROPER SUPPORT STEEL AND THE PROPER STEEL AND THE PROPER STEEL AND THE PROPER AND THE PROPER AND THE PROPER THE PROPER THE PROPER PROPER PROPER HANGING OF ALL PIPING AND EQUIPMENT. CHAINS, STRAP, PERFORATED BAR OR OF ALL PIPING AND EQUIPMENT. CHAINS, STRAP, PERFORATED BAR OR OF ALL PIPING AND EQUIPMENT. CHAINS, STRAP, PERFORATED BAR OR ALL PIPING AND EQUIPMENT. CHAINS, STRAP, PERFORATED BAR OR ALL PIPING AND EQUIPMENT. CHAINS, STRAP, PERFORATED BAR OR PIPING AND EQUIPMENT. CHAINS, STRAP, PERFORATED BAR OR PIPING AND EQUIPMENT. CHAINS, STRAP, PERFORATED BAR OR AND EQUIPMENT. CHAINS, STRAP, PERFORATED BAR OR AND EQUIPMENT. CHAINS, STRAP, PERFORATED BAR OR EQUIPMENT. CHAINS, STRAP, PERFORATED BAR OR EQUIPMENT. CHAINS, STRAP, PERFORATED BAR OR CHAINS, STRAP, PERFORATED BAR OR CHAINS, STRAP, PERFORATED BAR OR CHAINS, STRAP, PERFORATED BAR OR STRAP, PERFORATED BAR OR STRAP, PERFORATED BAR OR PERFORATED BAR OR PERFORATED BAR OR BAR OR BAR OR OR OR WIRE HANGERS SHALL NOT BE PERMITTED. HANGERS FOR INSULATED STEEL PIPING HANGERS SHALL NOT BE PERMITTED. HANGERS FOR INSULATED STEEL PIPING HANGERS SHALL NOT BE PERMITTED. HANGERS FOR INSULATED STEEL PIPING SHALL NOT BE PERMITTED. HANGERS FOR INSULATED STEEL PIPING SHALL NOT BE PERMITTED. HANGERS FOR INSULATED STEEL PIPING NOT BE PERMITTED. HANGERS FOR INSULATED STEEL PIPING NOT BE PERMITTED. HANGERS FOR INSULATED STEEL PIPING BE PERMITTED. HANGERS FOR INSULATED STEEL PIPING BE PERMITTED. HANGERS FOR INSULATED STEEL PIPING PERMITTED. HANGERS FOR INSULATED STEEL PIPING PERMITTED. HANGERS FOR INSULATED STEEL PIPING HANGERS FOR INSULATED STEEL PIPING HANGERS FOR INSULATED STEEL PIPING HANGERS FOR INSULATED STEEL PIPING FOR INSULATED STEEL PIPING FOR INSULATED STEEL PIPING INSULATED STEEL PIPING INSULATED STEEL PIPING STEEL PIPING STEEL PIPING PIPING PIPING SHALL BE INSTALLED OUTSIDE OF INSULATION AND PROVIDED WITH INSULATION BE INSTALLED OUTSIDE OF INSULATION AND PROVIDED WITH INSULATION BE INSTALLED OUTSIDE OF INSULATION AND PROVIDED WITH INSULATION INSTALLED OUTSIDE OF INSULATION AND PROVIDED WITH INSULATION INSTALLED OUTSIDE OF INSULATION AND PROVIDED WITH INSULATION OUTSIDE OF INSULATION AND PROVIDED WITH INSULATION OUTSIDE OF INSULATION AND PROVIDED WITH INSULATION OF INSULATION AND PROVIDED WITH INSULATION OF INSULATION AND PROVIDED WITH INSULATION INSULATION AND PROVIDED WITH INSULATION INSULATION AND PROVIDED WITH INSULATION AND PROVIDED WITH INSULATION AND PROVIDED WITH INSULATION PROVIDED WITH INSULATION PROVIDED WITH INSULATION WITH INSULATION WITH INSULATION INSULATION INSULATION PROTECTION SADDLES. SADDLE SHALL BE 12" LONG, 1/2 THE CIRCUMFERENCE IN SADDLES. SADDLE SHALL BE 12" LONG, 1/2 THE CIRCUMFERENCE IN SADDLES. SADDLE SHALL BE 12" LONG, 1/2 THE CIRCUMFERENCE IN SADDLE SHALL BE 12" LONG, 1/2 THE CIRCUMFERENCE IN SADDLE SHALL BE 12" LONG, 1/2 THE CIRCUMFERENCE IN SADDLE SHALL BE 12" LONG, 1/2 THE CIRCUMFERENCE IN SHALL BE 12" LONG, 1/2 THE CIRCUMFERENCE IN SHALL BE 12" LONG, 1/2 THE CIRCUMFERENCE IN BE 12" LONG, 1/2 THE CIRCUMFERENCE IN BE 12" LONG, 1/2 THE CIRCUMFERENCE IN 12" LONG, 1/2 THE CIRCUMFERENCE IN 12" LONG, 1/2 THE CIRCUMFERENCE IN LONG, 1/2 THE CIRCUMFERENCE IN LONG, 1/2 THE CIRCUMFERENCE IN 1/2 THE CIRCUMFERENCE IN 1/2 THE CIRCUMFERENCE IN THE CIRCUMFERENCE IN THE CIRCUMFERENCE IN CIRCUMFERENCE IN CIRCUMFERENCE IN IN IN WIDTH. ALL SUPPORT COMPONENTS SHALL CONFORM TO MANUFACTURER'S ALL SUPPORT COMPONENTS SHALL CONFORM TO MANUFACTURER'S ALL SUPPORT COMPONENTS SHALL CONFORM TO MANUFACTURER'S SUPPORT COMPONENTS SHALL CONFORM TO MANUFACTURER'S SUPPORT COMPONENTS SHALL CONFORM TO MANUFACTURER'S COMPONENTS SHALL CONFORM TO MANUFACTURER'S COMPONENTS SHALL CONFORM TO MANUFACTURER'S SHALL CONFORM TO MANUFACTURER'S SHALL CONFORM TO MANUFACTURER'S CONFORM TO MANUFACTURER'S CONFORM TO MANUFACTURER'S TO MANUFACTURER'S TO MANUFACTURER'S MANUFACTURER'S MANUFACTURER'S STANDARDIZATION SOCIETY SPECIFICATION SP-58. THE HANGERS SHALL SOCIETY SPECIFICATION SP-58. THE HANGERS SHALL SOCIETY SPECIFICATION SP-58. THE HANGERS SHALL SPECIFICATION SP-58. THE HANGERS SHALL SPECIFICATION SP-58. THE HANGERS SHALL SP-58. THE HANGERS SHALL SP-58. THE HANGERS SHALL THE HANGERS SHALL THE HANGERS SHALL THE HANGERS SHALL HANGERS SHALL HANGERS SHALL SHALL SHALL ADEQUATELY SUPPORT THE PIPING SYSTEM. THEY SHALL BE LOCATED NEAR OR AT SUPPORT THE PIPING SYSTEM. THEY SHALL BE LOCATED NEAR OR AT SUPPORT THE PIPING SYSTEM. THEY SHALL BE LOCATED NEAR OR AT THE PIPING SYSTEM. THEY SHALL BE LOCATED NEAR OR AT THE PIPING SYSTEM. THEY SHALL BE LOCATED NEAR OR AT PIPING SYSTEM. THEY SHALL BE LOCATED NEAR OR AT PIPING SYSTEM. THEY SHALL BE LOCATED NEAR OR AT SYSTEM. THEY SHALL BE LOCATED NEAR OR AT SYSTEM. THEY SHALL BE LOCATED NEAR OR AT THEY SHALL BE LOCATED NEAR OR AT THEY SHALL BE LOCATED NEAR OR AT THEY SHALL BE LOCATED NEAR OR AT SHALL BE LOCATED NEAR OR AT SHALL BE LOCATED NEAR OR AT BE LOCATED NEAR OR AT BE LOCATED NEAR OR AT LOCATED NEAR OR AT LOCATED NEAR OR AT NEAR OR AT NEAR OR AT OR AT OR AT AT AT CHANGES IN PIPING DIRECTION AND AT CONCENTRATED LOADS. THEY SHALL IN PIPING DIRECTION AND AT CONCENTRATED LOADS. THEY SHALL IN PIPING DIRECTION AND AT CONCENTRATED LOADS. THEY SHALL PIPING DIRECTION AND AT CONCENTRATED LOADS. THEY SHALL PIPING DIRECTION AND AT CONCENTRATED LOADS. THEY SHALL DIRECTION AND AT CONCENTRATED LOADS. THEY SHALL DIRECTION AND AT CONCENTRATED LOADS. THEY SHALL AND AT CONCENTRATED LOADS. THEY SHALL AND AT CONCENTRATED LOADS. THEY SHALL AT CONCENTRATED LOADS. THEY SHALL AT CONCENTRATED LOADS. THEY SHALL CONCENTRATED LOADS. THEY SHALL CONCENTRATED LOADS. THEY SHALL LOADS. THEY SHALL LOADS. THEY SHALL THEY SHALL THEY SHALL THEY SHALL SHALL SHALL PROVIDE VERTICAL ADJUSTMENT TO MAINTAIN PITCH REQUIRED FOR PROPER VERTICAL ADJUSTMENT TO MAINTAIN PITCH REQUIRED FOR PROPER VERTICAL ADJUSTMENT TO MAINTAIN PITCH REQUIRED FOR PROPER ADJUSTMENT TO MAINTAIN PITCH REQUIRED FOR PROPER ADJUSTMENT TO MAINTAIN PITCH REQUIRED FOR PROPER TO MAINTAIN PITCH REQUIRED FOR PROPER TO MAINTAIN PITCH REQUIRED FOR PROPER MAINTAIN PITCH REQUIRED FOR PROPER MAINTAIN PITCH REQUIRED FOR PROPER PITCH REQUIRED FOR PROPER PITCH REQUIRED FOR PROPER REQUIRED FOR PROPER REQUIRED FOR PROPER FOR PROPER FOR PROPER PROPER PROPER DRAINAGE AND ALLOW FOR EXPANSION AND CONTRACTION OF THE PIPING. HANGERS AND ALLOW FOR EXPANSION AND CONTRACTION OF THE PIPING. HANGERS AND ALLOW FOR EXPANSION AND CONTRACTION OF THE PIPING. HANGERS ALLOW FOR EXPANSION AND CONTRACTION OF THE PIPING. HANGERS ALLOW FOR EXPANSION AND CONTRACTION OF THE PIPING. HANGERS FOR EXPANSION AND CONTRACTION OF THE PIPING. HANGERS FOR EXPANSION AND CONTRACTION OF THE PIPING. HANGERS EXPANSION AND CONTRACTION OF THE PIPING. HANGERS EXPANSION AND CONTRACTION OF THE PIPING. HANGERS AND CONTRACTION OF THE PIPING. HANGERS AND CONTRACTION OF THE PIPING. HANGERS CONTRACTION OF THE PIPING. HANGERS CONTRACTION OF THE PIPING. HANGERS OF THE PIPING. HANGERS OF THE PIPING. HANGERS THE PIPING. HANGERS THE PIPING. HANGERS PIPING. HANGERS PIPING. HANGERS HANGERS HANGERS SHALL BE CONSTRUCTED OF MALLEABLE OR WROUGHT IRON, HANGERS SUPPORTING BE CONSTRUCTED OF MALLEABLE OR WROUGHT IRON, HANGERS SUPPORTING BE CONSTRUCTED OF MALLEABLE OR WROUGHT IRON, HANGERS SUPPORTING CONSTRUCTED OF MALLEABLE OR WROUGHT IRON, HANGERS SUPPORTING CONSTRUCTED OF MALLEABLE OR WROUGHT IRON, HANGERS SUPPORTING OF MALLEABLE OR WROUGHT IRON, HANGERS SUPPORTING OF MALLEABLE OR WROUGHT IRON, HANGERS SUPPORTING MALLEABLE OR WROUGHT IRON, HANGERS SUPPORTING MALLEABLE OR WROUGHT IRON, HANGERS SUPPORTING OR WROUGHT IRON, HANGERS SUPPORTING OR WROUGHT IRON, HANGERS SUPPORTING WROUGHT IRON, HANGERS SUPPORTING WROUGHT IRON, HANGERS SUPPORTING IRON, HANGERS SUPPORTING IRON, HANGERS SUPPORTING HANGERS SUPPORTING HANGERS SUPPORTING SUPPORTING SUPPORTING COPPER PIPE SHALL BE COPPER-PLATED.PIPE HANGERS FOR COLD WATER SERVICES PIPE SHALL BE COPPER-PLATED.PIPE HANGERS FOR COLD WATER SERVICES PIPE SHALL BE COPPER-PLATED.PIPE HANGERS FOR COLD WATER SERVICES SHALL BE COPPER-PLATED.PIPE HANGERS FOR COLD WATER SERVICES SHALL BE COPPER-PLATED.PIPE HANGERS FOR COLD WATER SERVICES BE COPPER-PLATED.PIPE HANGERS FOR COLD WATER SERVICES BE COPPER-PLATED.PIPE HANGERS FOR COLD WATER SERVICES COPPER-PLATED.PIPE HANGERS FOR COLD WATER SERVICES COPPER-PLATED.PIPE HANGERS FOR COLD WATER SERVICES HANGERS FOR COLD WATER SERVICES HANGERS FOR COLD WATER SERVICES FOR COLD WATER SERVICES FOR COLD WATER SERVICES COLD WATER SERVICES COLD WATER SERVICES WATER SERVICES WATER SERVICES SERVICES SERVICES SHALL BE LARGE ENOUGH TO ENCOMPASS THE INSULATION, USING A METAL SHIELD, BE LARGE ENOUGH TO ENCOMPASS THE INSULATION, USING A METAL SHIELD, BE LARGE ENOUGH TO ENCOMPASS THE INSULATION, USING A METAL SHIELD, LARGE ENOUGH TO ENCOMPASS THE INSULATION, USING A METAL SHIELD, LARGE ENOUGH TO ENCOMPASS THE INSULATION, USING A METAL SHIELD, ENOUGH TO ENCOMPASS THE INSULATION, USING A METAL SHIELD, ENOUGH TO ENCOMPASS THE INSULATION, USING A METAL SHIELD, TO ENCOMPASS THE INSULATION, USING A METAL SHIELD, TO ENCOMPASS THE INSULATION, USING A METAL SHIELD, ENCOMPASS THE INSULATION, USING A METAL SHIELD, ENCOMPASS THE INSULATION, USING A METAL SHIELD, THE INSULATION, USING A METAL SHIELD, THE INSULATION, USING A METAL SHIELD, INSULATION, USING A METAL SHIELD, INSULATION, USING A METAL SHIELD, USING A METAL SHIELD, USING A METAL SHIELD, A METAL SHIELD, A METAL SHIELD, METAL SHIELD, METAL SHIELD, SHIELD, SHIELD, SO THAT VAPOR BARRIER JACKET WILL NOT BE BROKEN. PIPE SLEEVES AND FIRE STOPPING: FURNISH AND SET SLEEVES TO ACCOMMODATE PIPES PASSING THROUGH AND SET SLEEVES TO ACCOMMODATE PIPES PASSING THROUGH AND SET SLEEVES TO ACCOMMODATE PIPES PASSING THROUGH SET SLEEVES TO ACCOMMODATE PIPES PASSING THROUGH SET SLEEVES TO ACCOMMODATE PIPES PASSING THROUGH SLEEVES TO ACCOMMODATE PIPES PASSING THROUGH SLEEVES TO ACCOMMODATE PIPES PASSING THROUGH TO ACCOMMODATE PIPES PASSING THROUGH TO ACCOMMODATE PIPES PASSING THROUGH ACCOMMODATE PIPES PASSING THROUGH ACCOMMODATE PIPES PASSING THROUGH PIPES PASSING THROUGH PIPES PASSING THROUGH PASSING THROUGH PASSING THROUGH THROUGH THROUGH FOUNDATIONS, WALLS, FLOORS, FURRING AND CEILINGS. COOPERATE WITH GENERAL WALLS, FLOORS, FURRING AND CEILINGS. COOPERATE WITH GENERAL WALLS, FLOORS, FURRING AND CEILINGS. COOPERATE WITH GENERAL FLOORS, FURRING AND CEILINGS. COOPERATE WITH GENERAL FLOORS, FURRING AND CEILINGS. COOPERATE WITH GENERAL FURRING AND CEILINGS. COOPERATE WITH GENERAL FURRING AND CEILINGS. COOPERATE WITH GENERAL AND CEILINGS. COOPERATE WITH GENERAL AND CEILINGS. COOPERATE WITH GENERAL CEILINGS. COOPERATE WITH GENERAL CEILINGS. COOPERATE WITH GENERAL COOPERATE WITH GENERAL COOPERATE WITH GENERAL COOPERATE WITH GENERAL WITH GENERAL WITH GENERAL GENERAL GENERAL CONTRACTOR IN SETTING ALL SLEEVES. SLEEVES SHALL BE FULL THICKNESS OF IN SETTING ALL SLEEVES. SLEEVES SHALL BE FULL THICKNESS OF IN SETTING ALL SLEEVES. SLEEVES SHALL BE FULL THICKNESS OF SETTING ALL SLEEVES. SLEEVES SHALL BE FULL THICKNESS OF SETTING ALL SLEEVES. SLEEVES SHALL BE FULL THICKNESS OF ALL SLEEVES. SLEEVES SHALL BE FULL THICKNESS OF ALL SLEEVES. SLEEVES SHALL BE FULL THICKNESS OF SLEEVES. SLEEVES SHALL BE FULL THICKNESS OF SLEEVES. SLEEVES SHALL BE FULL THICKNESS OF SLEEVES SHALL BE FULL THICKNESS OF SLEEVES SHALL BE FULL THICKNESS OF SLEEVES SHALL BE FULL THICKNESS OF SHALL BE FULL THICKNESS OF SHALL BE FULL THICKNESS OF BE FULL THICKNESS OF BE FULL THICKNESS OF FULL THICKNESS OF FULL THICKNESS OF THICKNESS OF THICKNESS OF OF OF CONSTRUCTION. SLEEVES SHALL BE LARGE ENOUGH TO PERMIT FREE MOVEMENT OF SLEEVES SHALL BE LARGE ENOUGH TO PERMIT FREE MOVEMENT OF SLEEVES SHALL BE LARGE ENOUGH TO PERMIT FREE MOVEMENT OF SHALL BE LARGE ENOUGH TO PERMIT FREE MOVEMENT OF SHALL BE LARGE ENOUGH TO PERMIT FREE MOVEMENT OF BE LARGE ENOUGH TO PERMIT FREE MOVEMENT OF BE LARGE ENOUGH TO PERMIT FREE MOVEMENT OF LARGE ENOUGH TO PERMIT FREE MOVEMENT OF LARGE ENOUGH TO PERMIT FREE MOVEMENT OF ENOUGH TO PERMIT FREE MOVEMENT OF ENOUGH TO PERMIT FREE MOVEMENT OF TO PERMIT FREE MOVEMENT OF TO PERMIT FREE MOVEMENT OF PERMIT FREE MOVEMENT OF PERMIT FREE MOVEMENT OF FREE MOVEMENT OF FREE MOVEMENT OF MOVEMENT OF MOVEMENT OF OF OF PIPE WHERE EXPANSION AND CONTRACTION OCCUR. PROVIDE U.L. LISTED FIRE WHERE EXPANSION AND CONTRACTION OCCUR. PROVIDE U.L. LISTED FIRE WHERE EXPANSION AND CONTRACTION OCCUR. PROVIDE U.L. LISTED FIRE EXPANSION AND CONTRACTION OCCUR. PROVIDE U.L. LISTED FIRE EXPANSION AND CONTRACTION OCCUR. PROVIDE U.L. LISTED FIRE AND CONTRACTION OCCUR. PROVIDE U.L. LISTED FIRE AND CONTRACTION OCCUR. PROVIDE U.L. LISTED FIRE CONTRACTION OCCUR. PROVIDE U.L. LISTED FIRE CONTRACTION OCCUR. PROVIDE U.L. LISTED FIRE OCCUR. PROVIDE U.L. LISTED FIRE OCCUR. PROVIDE U.L. LISTED FIRE PROVIDE U.L. LISTED FIRE PROVIDE U.L. LISTED FIRE PROVIDE U.L. LISTED FIRE U.L. LISTED FIRE U.L. LISTED FIRE LISTED FIRE LISTED FIRE FIRE FIRE STOPPING FOR ALL PENETRATIONS OF FLOORS, WALLS, CEILINGS, ETC. THE FOR ALL PENETRATIONS OF FLOORS, WALLS, CEILINGS, ETC. THE FOR ALL PENETRATIONS OF FLOORS, WALLS, CEILINGS, ETC. THE ALL PENETRATIONS OF FLOORS, WALLS, CEILINGS, ETC. THE ALL PENETRATIONS OF FLOORS, WALLS, CEILINGS, ETC. THE PENETRATIONS OF FLOORS, WALLS, CEILINGS, ETC. THE PENETRATIONS OF FLOORS, WALLS, CEILINGS, ETC. THE OF FLOORS, WALLS, CEILINGS, ETC. THE OF FLOORS, WALLS, CEILINGS, ETC. THE FLOORS, WALLS, CEILINGS, ETC. THE FLOORS, WALLS, CEILINGS, ETC. THE WALLS, CEILINGS, ETC. THE WALLS, CEILINGS, ETC. THE CEILINGS, ETC. THE CEILINGS, ETC. THE ETC. THE ETC. THE THE THE CONTRACTOR SHALL PREPARE AND SUBMIT A COMPLETE DETAILED SUBMITTAL FOR SHALL PREPARE AND SUBMIT A COMPLETE DETAILED SUBMITTAL FOR SHALL PREPARE AND SUBMIT A COMPLETE DETAILED SUBMITTAL FOR PREPARE AND SUBMIT A COMPLETE DETAILED SUBMITTAL FOR PREPARE AND SUBMIT A COMPLETE DETAILED SUBMITTAL FOR AND SUBMIT A COMPLETE DETAILED SUBMITTAL FOR AND SUBMIT A COMPLETE DETAILED SUBMITTAL FOR SUBMIT A COMPLETE DETAILED SUBMITTAL FOR SUBMIT A COMPLETE DETAILED SUBMITTAL FOR A COMPLETE DETAILED SUBMITTAL FOR A COMPLETE DETAILED SUBMITTAL FOR COMPLETE DETAILED SUBMITTAL FOR COMPLETE DETAILED SUBMITTAL FOR DETAILED SUBMITTAL FOR DETAILED SUBMITTAL FOR SUBMITTAL FOR SUBMITTAL FOR FOR FOR ALL FIRE STOPPING CONDITIONS FOR THE PROJECT. THIS SUBMITTAL SHALL FIRE STOPPING CONDITIONS FOR THE PROJECT. THIS SUBMITTAL SHALL FIRE STOPPING CONDITIONS FOR THE PROJECT. THIS SUBMITTAL SHALL STOPPING CONDITIONS FOR THE PROJECT. THIS SUBMITTAL SHALL STOPPING CONDITIONS FOR THE PROJECT. THIS SUBMITTAL SHALL CONDITIONS FOR THE PROJECT. THIS SUBMITTAL SHALL CONDITIONS FOR THE PROJECT. THIS SUBMITTAL SHALL FOR THE PROJECT. THIS SUBMITTAL SHALL FOR THE PROJECT. THIS SUBMITTAL SHALL THE PROJECT. THIS SUBMITTAL SHALL THE PROJECT. THIS SUBMITTAL SHALL PROJECT. THIS SUBMITTAL SHALL PROJECT. THIS SUBMITTAL SHALL THIS SUBMITTAL SHALL THIS SUBMITTAL SHALL THIS SUBMITTAL SHALL SUBMITTAL SHALL SUBMITTAL SHALL SHALL SHALL CLEARLY INDICATE THE FIRE STOPPING INSTALLATION METHODS AND MATERIALS INDICATE THE FIRE STOPPING INSTALLATION METHODS AND MATERIALS INDICATE THE FIRE STOPPING INSTALLATION METHODS AND MATERIALS THE FIRE STOPPING INSTALLATION METHODS AND MATERIALS THE FIRE STOPPING INSTALLATION METHODS AND MATERIALS FIRE STOPPING INSTALLATION METHODS AND MATERIALS FIRE STOPPING INSTALLATION METHODS AND MATERIALS STOPPING INSTALLATION METHODS AND MATERIALS STOPPING INSTALLATION METHODS AND MATERIALS INSTALLATION METHODS AND MATERIALS INSTALLATION METHODS AND MATERIALS METHODS AND MATERIALS METHODS AND MATERIALS AND MATERIALS AND MATERIALS MATERIALS MATERIALS REQUIRED TO MAINTAIN THE FIRE RATING OF THE ASSEMBLY. THIS SUBMITTAL TO MAINTAIN THE FIRE RATING OF THE ASSEMBLY. THIS SUBMITTAL TO MAINTAIN THE FIRE RATING OF THE ASSEMBLY. THIS SUBMITTAL MAINTAIN THE FIRE RATING OF THE ASSEMBLY. THIS SUBMITTAL MAINTAIN THE FIRE RATING OF THE ASSEMBLY. THIS SUBMITTAL THE FIRE RATING OF THE ASSEMBLY. THIS SUBMITTAL THE FIRE RATING OF THE ASSEMBLY. THIS SUBMITTAL FIRE RATING OF THE ASSEMBLY. THIS SUBMITTAL FIRE RATING OF THE ASSEMBLY. THIS SUBMITTAL RATING OF THE ASSEMBLY. THIS SUBMITTAL RATING OF THE ASSEMBLY. THIS SUBMITTAL OF THE ASSEMBLY. THIS SUBMITTAL OF THE ASSEMBLY. THIS SUBMITTAL THE ASSEMBLY. THIS SUBMITTAL THE ASSEMBLY. THIS SUBMITTAL ASSEMBLY. THIS SUBMITTAL ASSEMBLY. THIS SUBMITTAL THIS SUBMITTAL THIS SUBMITTAL THIS SUBMITTAL SUBMITTAL SUBMITTAL SHALL INCLUDE U.L. TEST SHEET FOR THE INSTALLATION AND ALL INSTALLATION INCLUDE U.L. TEST SHEET FOR THE INSTALLATION AND ALL INSTALLATION INCLUDE U.L. TEST SHEET FOR THE INSTALLATION AND ALL INSTALLATION U.L. TEST SHEET FOR THE INSTALLATION AND ALL INSTALLATION U.L. TEST SHEET FOR THE INSTALLATION AND ALL INSTALLATION TEST SHEET FOR THE INSTALLATION AND ALL INSTALLATION TEST SHEET FOR THE INSTALLATION AND ALL INSTALLATION SHEET FOR THE INSTALLATION AND ALL INSTALLATION SHEET FOR THE INSTALLATION AND ALL INSTALLATION FOR THE INSTALLATION AND ALL INSTALLATION FOR THE INSTALLATION AND ALL INSTALLATION THE INSTALLATION AND ALL INSTALLATION THE INSTALLATION AND ALL INSTALLATION INSTALLATION AND ALL INSTALLATION INSTALLATION AND ALL INSTALLATION AND ALL INSTALLATION AND ALL INSTALLATION ALL INSTALLATION ALL INSTALLATION INSTALLATION INSTALLATION INSTRUCTIONS. DO NOT PROCEED WITH INSTALLATION OF FIRE STOPPING UNTIL SHOP DO NOT PROCEED WITH INSTALLATION OF FIRE STOPPING UNTIL SHOP DO NOT PROCEED WITH INSTALLATION OF FIRE STOPPING UNTIL SHOP NOT PROCEED WITH INSTALLATION OF FIRE STOPPING UNTIL SHOP NOT PROCEED WITH INSTALLATION OF FIRE STOPPING UNTIL SHOP PROCEED WITH INSTALLATION OF FIRE STOPPING UNTIL SHOP PROCEED WITH INSTALLATION OF FIRE STOPPING UNTIL SHOP WITH INSTALLATION OF FIRE STOPPING UNTIL SHOP WITH INSTALLATION OF FIRE STOPPING UNTIL SHOP INSTALLATION OF FIRE STOPPING UNTIL SHOP INSTALLATION OF FIRE STOPPING UNTIL SHOP OF FIRE STOPPING UNTIL SHOP OF FIRE STOPPING UNTIL SHOP FIRE STOPPING UNTIL SHOP FIRE STOPPING UNTIL SHOP STOPPING UNTIL SHOP STOPPING UNTIL SHOP UNTIL SHOP UNTIL SHOP SHOP SHOP DRAWINGS HAVE BEEN APPROVED BY THE ARCHITECT AND ENGINEER. THE HAVE BEEN APPROVED BY THE ARCHITECT AND ENGINEER. THE HAVE BEEN APPROVED BY THE ARCHITECT AND ENGINEER. THE BEEN APPROVED BY THE ARCHITECT AND ENGINEER. THE BEEN APPROVED BY THE ARCHITECT AND ENGINEER. THE APPROVED BY THE ARCHITECT AND ENGINEER. THE APPROVED BY THE ARCHITECT AND ENGINEER. THE BY THE ARCHITECT AND ENGINEER. THE BY THE ARCHITECT AND ENGINEER. THE THE ARCHITECT AND ENGINEER. THE THE ARCHITECT AND ENGINEER. THE ARCHITECT AND ENGINEER. THE ARCHITECT AND ENGINEER. THE AND ENGINEER. THE AND ENGINEER. THE ENGINEER. THE ENGINEER. THE THE THE THE CONTRACTOR SHALL HAVE ALL SHOP DRAWINGS AVAILABLE AND SHALL UTILIZE SHALL HAVE ALL SHOP DRAWINGS AVAILABLE AND SHALL UTILIZE SHALL HAVE ALL SHOP DRAWINGS AVAILABLE AND SHALL UTILIZE HAVE ALL SHOP DRAWINGS AVAILABLE AND SHALL UTILIZE HAVE ALL SHOP DRAWINGS AVAILABLE AND SHALL UTILIZE ALL SHOP DRAWINGS AVAILABLE AND SHALL UTILIZE ALL SHOP DRAWINGS AVAILABLE AND SHALL UTILIZE SHOP DRAWINGS AVAILABLE AND SHALL UTILIZE SHOP DRAWINGS AVAILABLE AND SHALL UTILIZE DRAWINGS AVAILABLE AND SHALL UTILIZE DRAWINGS AVAILABLE AND SHALL UTILIZE AVAILABLE AND SHALL UTILIZE AVAILABLE AND SHALL UTILIZE AND SHALL UTILIZE AND SHALL UTILIZE SHALL UTILIZE SHALL UTILIZE UTILIZE UTILIZE APPROVED SHOP DRAWINGS FOR THE INSTALLATION OF FIRE STOPPING. SLEEVES SHOP DRAWINGS FOR THE INSTALLATION OF FIRE STOPPING. SLEEVES SHOP DRAWINGS FOR THE INSTALLATION OF FIRE STOPPING. SLEEVES DRAWINGS FOR THE INSTALLATION OF FIRE STOPPING. SLEEVES DRAWINGS FOR THE INSTALLATION OF FIRE STOPPING. SLEEVES FOR THE INSTALLATION OF FIRE STOPPING. SLEEVES FOR THE INSTALLATION OF FIRE STOPPING. SLEEVES THE INSTALLATION OF FIRE STOPPING. SLEEVES THE INSTALLATION OF FIRE STOPPING. SLEEVES INSTALLATION OF FIRE STOPPING. SLEEVES INSTALLATION OF FIRE STOPPING. SLEEVES OF FIRE STOPPING. SLEEVES OF FIRE STOPPING. SLEEVES FIRE STOPPING. SLEEVES FIRE STOPPING. SLEEVES STOPPING. SLEEVES STOPPING. SLEEVES SLEEVES SLEEVES THROUGH EXTERIOR WALLS BELOW GRADE, THROUGH FOUNDATION WALLS, SHALL BE EXTERIOR WALLS BELOW GRADE, THROUGH FOUNDATION WALLS, SHALL BE EXTERIOR WALLS BELOW GRADE, THROUGH FOUNDATION WALLS, SHALL BE WALLS BELOW GRADE, THROUGH FOUNDATION WALLS, SHALL BE WALLS BELOW GRADE, THROUGH FOUNDATION WALLS, SHALL BE BELOW GRADE, THROUGH FOUNDATION WALLS, SHALL BE BELOW GRADE, THROUGH FOUNDATION WALLS, SHALL BE GRADE, THROUGH FOUNDATION WALLS, SHALL BE GRADE, THROUGH FOUNDATION WALLS, SHALL BE THROUGH FOUNDATION WALLS, SHALL BE THROUGH FOUNDATION WALLS, SHALL BE FOUNDATION WALLS, SHALL BE FOUNDATION WALLS, SHALL BE WALLS, SHALL BE WALLS, SHALL BE SHALL BE SHALL BE BE BE LINK-SEAL” WATER-TIGHT MECHANICAL SLEEVE SEAL. WATER-TIGHT MECHANICAL SLEEVE SEAL. ACCESS PANELS: THE EXTENT OF ACCESS REQUIREMENTS FOR MECHANICAL AND PLUMBING WORK IS EXTENT OF ACCESS REQUIREMENTS FOR MECHANICAL AND PLUMBING WORK IS EXTENT OF ACCESS REQUIREMENTS FOR MECHANICAL AND PLUMBING WORK IS OF ACCESS REQUIREMENTS FOR MECHANICAL AND PLUMBING WORK IS OF ACCESS REQUIREMENTS FOR MECHANICAL AND PLUMBING WORK IS ACCESS REQUIREMENTS FOR MECHANICAL AND PLUMBING WORK IS ACCESS REQUIREMENTS FOR MECHANICAL AND PLUMBING WORK IS REQUIREMENTS FOR MECHANICAL AND PLUMBING WORK IS REQUIREMENTS FOR MECHANICAL AND PLUMBING WORK IS FOR MECHANICAL AND PLUMBING WORK IS FOR MECHANICAL AND PLUMBING WORK IS MECHANICAL AND PLUMBING WORK IS MECHANICAL AND PLUMBING WORK IS AND PLUMBING WORK IS AND PLUMBING WORK IS PLUMBING WORK IS PLUMBING WORK IS WORK IS WORK IS IS IS INDICATED ON THE DRAWINGS. THE ACCESS UNITS REQUIRED ARE RECOGNIZED TO ON THE DRAWINGS. THE ACCESS UNITS REQUIRED ARE RECOGNIZED TO ON THE DRAWINGS. THE ACCESS UNITS REQUIRED ARE RECOGNIZED TO THE DRAWINGS. THE ACCESS UNITS REQUIRED ARE RECOGNIZED TO THE DRAWINGS. THE ACCESS UNITS REQUIRED ARE RECOGNIZED TO DRAWINGS. THE ACCESS UNITS REQUIRED ARE RECOGNIZED TO DRAWINGS. THE ACCESS UNITS REQUIRED ARE RECOGNIZED TO THE ACCESS UNITS REQUIRED ARE RECOGNIZED TO THE ACCESS UNITS REQUIRED ARE RECOGNIZED TO ACCESS UNITS REQUIRED ARE RECOGNIZED TO ACCESS UNITS REQUIRED ARE RECOGNIZED TO UNITS REQUIRED ARE RECOGNIZED TO UNITS REQUIRED ARE RECOGNIZED TO REQUIRED ARE RECOGNIZED TO REQUIRED ARE RECOGNIZED TO ARE RECOGNIZED TO ARE RECOGNIZED TO RECOGNIZED TO RECOGNIZED TO TO TO INCLUDE: (1) THOSE UNITS DIRECTLY INDICATED IN THE CONTRACT DOCUMENTS, (2) (1) THOSE UNITS DIRECTLY INDICATED IN THE CONTRACT DOCUMENTS, (2) (1) THOSE UNITS DIRECTLY INDICATED IN THE CONTRACT DOCUMENTS, (2) THOSE UNITS DIRECTLY INDICATED IN THE CONTRACT DOCUMENTS, (2) THOSE UNITS DIRECTLY INDICATED IN THE CONTRACT DOCUMENTS, (2) UNITS DIRECTLY INDICATED IN THE CONTRACT DOCUMENTS, (2) UNITS DIRECTLY INDICATED IN THE CONTRACT DOCUMENTS, (2) DIRECTLY INDICATED IN THE CONTRACT DOCUMENTS, (2) DIRECTLY INDICATED IN THE CONTRACT DOCUMENTS, (2) INDICATED IN THE CONTRACT DOCUMENTS, (2) INDICATED IN THE CONTRACT DOCUMENTS, (2) IN THE CONTRACT DOCUMENTS, (2) IN THE CONTRACT DOCUMENTS, (2) THE CONTRACT DOCUMENTS, (2) THE CONTRACT DOCUMENTS, (2) CONTRACT DOCUMENTS, (2) CONTRACT DOCUMENTS, (2) DOCUMENTS, (2) DOCUMENTS, (2) (2) (2) THOSE UNITS INDIRECTLY INDICATED IN THE CONTRACT DOCUMENTS BY WAY OF UNITS INDIRECTLY INDICATED IN THE CONTRACT DOCUMENTS BY WAY OF UNITS INDIRECTLY INDICATED IN THE CONTRACT DOCUMENTS BY WAY OF INDIRECTLY INDICATED IN THE CONTRACT DOCUMENTS BY WAY OF INDIRECTLY INDICATED IN THE CONTRACT DOCUMENTS BY WAY OF INDICATED IN THE CONTRACT DOCUMENTS BY WAY OF INDICATED IN THE CONTRACT DOCUMENTS BY WAY OF IN THE CONTRACT DOCUMENTS BY WAY OF IN THE CONTRACT DOCUMENTS BY WAY OF THE CONTRACT DOCUMENTS BY WAY OF THE CONTRACT DOCUMENTS BY WAY OF CONTRACT DOCUMENTS BY WAY OF CONTRACT DOCUMENTS BY WAY OF DOCUMENTS BY WAY OF DOCUMENTS BY WAY OF BY WAY OF BY WAY OF WAY OF WAY OF OF OF MECHANICAL WORK LOCATED BEHIND OTHER CONSTRUCTION OR FINISHES, AND WORK LOCATED BEHIND OTHER CONSTRUCTION OR FINISHES, AND WORK LOCATED BEHIND OTHER CONSTRUCTION OR FINISHES, AND LOCATED BEHIND OTHER CONSTRUCTION OR FINISHES, AND LOCATED BEHIND OTHER CONSTRUCTION OR FINISHES, AND BEHIND OTHER CONSTRUCTION OR FINISHES, AND BEHIND OTHER CONSTRUCTION OR FINISHES, AND OTHER CONSTRUCTION OR FINISHES, AND OTHER CONSTRUCTION OR FINISHES, AND CONSTRUCTION OR FINISHES, AND CONSTRUCTION OR FINISHES, AND OR FINISHES, AND OR FINISHES, AND FINISHES, AND FINISHES, AND AND AND REQUIRING ACCESS, AND (3) THOSE ADDITIONAL UNITS IDENTIFIED SUBSEQUENTLY TO ACCESS, AND (3) THOSE ADDITIONAL UNITS IDENTIFIED SUBSEQUENTLY TO ACCESS, AND (3) THOSE ADDITIONAL UNITS IDENTIFIED SUBSEQUENTLY TO AND (3) THOSE ADDITIONAL UNITS IDENTIFIED SUBSEQUENTLY TO AND (3) THOSE ADDITIONAL UNITS IDENTIFIED SUBSEQUENTLY TO (3) THOSE ADDITIONAL UNITS IDENTIFIED SUBSEQUENTLY TO (3) THOSE ADDITIONAL UNITS IDENTIFIED SUBSEQUENTLY TO THOSE ADDITIONAL UNITS IDENTIFIED SUBSEQUENTLY TO THOSE ADDITIONAL UNITS IDENTIFIED SUBSEQUENTLY TO ADDITIONAL UNITS IDENTIFIED SUBSEQUENTLY TO ADDITIONAL UNITS IDENTIFIED SUBSEQUENTLY TO UNITS IDENTIFIED SUBSEQUENTLY TO UNITS IDENTIFIED SUBSEQUENTLY TO IDENTIFIED SUBSEQUENTLY TO IDENTIFIED SUBSEQUENTLY TO SUBSEQUENTLY TO SUBSEQUENTLY TO TO TO THE CONTRACT DATE, BECAUSE OF THE ACTUAL MANNER IN WHICH MECHANICAL CONTRACT DATE, BECAUSE OF THE ACTUAL MANNER IN WHICH MECHANICAL CONTRACT DATE, BECAUSE OF THE ACTUAL MANNER IN WHICH MECHANICAL DATE, BECAUSE OF THE ACTUAL MANNER IN WHICH MECHANICAL DATE, BECAUSE OF THE ACTUAL MANNER IN WHICH MECHANICAL BECAUSE OF THE ACTUAL MANNER IN WHICH MECHANICAL BECAUSE OF THE ACTUAL MANNER IN WHICH MECHANICAL OF THE ACTUAL MANNER IN WHICH MECHANICAL OF THE ACTUAL MANNER IN WHICH MECHANICAL THE ACTUAL MANNER IN WHICH MECHANICAL THE ACTUAL MANNER IN WHICH MECHANICAL ACTUAL MANNER IN WHICH MECHANICAL ACTUAL MANNER IN WHICH MECHANICAL MANNER IN WHICH MECHANICAL MANNER IN WHICH MECHANICAL IN WHICH MECHANICAL IN WHICH MECHANICAL WHICH MECHANICAL WHICH MECHANICAL MECHANICAL MECHANICAL WORK WAS INSTALLED. PROVIDE ACCESS PANELS FOR NEW EQUIPMENT CONCEALED WAS INSTALLED. PROVIDE ACCESS PANELS FOR NEW EQUIPMENT CONCEALED WAS INSTALLED. PROVIDE ACCESS PANELS FOR NEW EQUIPMENT CONCEALED INSTALLED. PROVIDE ACCESS PANELS FOR NEW EQUIPMENT CONCEALED INSTALLED. PROVIDE ACCESS PANELS FOR NEW EQUIPMENT CONCEALED PROVIDE ACCESS PANELS FOR NEW EQUIPMENT CONCEALED PROVIDE ACCESS PANELS FOR NEW EQUIPMENT CONCEALED ACCESS PANELS FOR NEW EQUIPMENT CONCEALED ACCESS PANELS FOR NEW EQUIPMENT CONCEALED PANELS FOR NEW EQUIPMENT CONCEALED PANELS FOR NEW EQUIPMENT CONCEALED FOR NEW EQUIPMENT CONCEALED FOR NEW EQUIPMENT CONCEALED NEW EQUIPMENT CONCEALED NEW EQUIPMENT CONCEALED EQUIPMENT CONCEALED EQUIPMENT CONCEALED CONCEALED CONCEALED BY NEW FINISHES. ACCESS PANELS SHALL BE PROVIDED IN CEILINGS, EXCEPT IN NEW FINISHES. ACCESS PANELS SHALL BE PROVIDED IN CEILINGS, EXCEPT IN NEW FINISHES. ACCESS PANELS SHALL BE PROVIDED IN CEILINGS, EXCEPT IN FINISHES. ACCESS PANELS SHALL BE PROVIDED IN CEILINGS, EXCEPT IN FINISHES. ACCESS PANELS SHALL BE PROVIDED IN CEILINGS, EXCEPT IN ACCESS PANELS SHALL BE PROVIDED IN CEILINGS, EXCEPT IN ACCESS PANELS SHALL BE PROVIDED IN CEILINGS, EXCEPT IN PANELS SHALL BE PROVIDED IN CEILINGS, EXCEPT IN PANELS SHALL BE PROVIDED IN CEILINGS, EXCEPT IN SHALL BE PROVIDED IN CEILINGS, EXCEPT IN SHALL BE PROVIDED IN CEILINGS, EXCEPT IN BE PROVIDED IN CEILINGS, EXCEPT IN BE PROVIDED IN CEILINGS, EXCEPT IN PROVIDED IN CEILINGS, EXCEPT IN PROVIDED IN CEILINGS, EXCEPT IN IN CEILINGS, EXCEPT IN IN CEILINGS, EXCEPT IN CEILINGS, EXCEPT IN CEILINGS, EXCEPT IN EXCEPT IN EXCEPT IN IN IN REMOVABLE TILE, AND IN WALLS TO PERMIT ACCESS TO CONCEALED VALVES, ETC. TILE, AND IN WALLS TO PERMIT ACCESS TO CONCEALED VALVES, ETC. TILE, AND IN WALLS TO PERMIT ACCESS TO CONCEALED VALVES, ETC. AND IN WALLS TO PERMIT ACCESS TO CONCEALED VALVES, ETC. AND IN WALLS TO PERMIT ACCESS TO CONCEALED VALVES, ETC. IN WALLS TO PERMIT ACCESS TO CONCEALED VALVES, ETC. IN WALLS TO PERMIT ACCESS TO CONCEALED VALVES, ETC. WALLS TO PERMIT ACCESS TO CONCEALED VALVES, ETC. WALLS TO PERMIT ACCESS TO CONCEALED VALVES, ETC. TO PERMIT ACCESS TO CONCEALED VALVES, ETC. TO PERMIT ACCESS TO CONCEALED VALVES, ETC. PERMIT ACCESS TO CONCEALED VALVES, ETC. PERMIT ACCESS TO CONCEALED VALVES, ETC. ACCESS TO CONCEALED VALVES, ETC. ACCESS TO CONCEALED VALVES, ETC. TO CONCEALED VALVES, ETC. TO CONCEALED VALVES, ETC. CONCEALED VALVES, ETC. CONCEALED VALVES, ETC. VALVES, ETC. VALVES, ETC. ETC. ETC. VALVE PANELS SHALL BE 12" BY 12" MINIMUM. FLOOR, WALL AND CEILING ESCUTCHEONS: ESCUTCHEON PLATES SHALL BE INSTALLED ON ALL EXPOSED PIPE PASSING THROUGH PLATES SHALL BE INSTALLED ON ALL EXPOSED PIPE PASSING THROUGH PLATES SHALL BE INSTALLED ON ALL EXPOSED PIPE PASSING THROUGH SHALL BE INSTALLED ON ALL EXPOSED PIPE PASSING THROUGH SHALL BE INSTALLED ON ALL EXPOSED PIPE PASSING THROUGH BE INSTALLED ON ALL EXPOSED PIPE PASSING THROUGH BE INSTALLED ON ALL EXPOSED PIPE PASSING THROUGH INSTALLED ON ALL EXPOSED PIPE PASSING THROUGH INSTALLED ON ALL EXPOSED PIPE PASSING THROUGH ON ALL EXPOSED PIPE PASSING THROUGH ON ALL EXPOSED PIPE PASSING THROUGH ALL EXPOSED PIPE PASSING THROUGH ALL EXPOSED PIPE PASSING THROUGH EXPOSED PIPE PASSING THROUGH EXPOSED PIPE PASSING THROUGH PIPE PASSING THROUGH PIPE PASSING THROUGH PASSING THROUGH PASSING THROUGH THROUGH THROUGH WALLS, FLOORS OR CEILINGS. PLATES SHALL BE AS MANUFACTURED BY RITTER FLOORS OR CEILINGS. PLATES SHALL BE AS MANUFACTURED BY RITTER FLOORS OR CEILINGS. PLATES SHALL BE AS MANUFACTURED BY RITTER OR CEILINGS. PLATES SHALL BE AS MANUFACTURED BY RITTER OR CEILINGS. PLATES SHALL BE AS MANUFACTURED BY RITTER CEILINGS. PLATES SHALL BE AS MANUFACTURED BY RITTER CEILINGS. PLATES SHALL BE AS MANUFACTURED BY RITTER PLATES SHALL BE AS MANUFACTURED BY RITTER PLATES SHALL BE AS MANUFACTURED BY RITTER PLATES SHALL BE AS MANUFACTURED BY RITTER SHALL BE AS MANUFACTURED BY RITTER SHALL BE AS MANUFACTURED BY RITTER BE AS MANUFACTURED BY RITTER BE AS MANUFACTURED BY RITTER AS MANUFACTURED BY RITTER AS MANUFACTURED BY RITTER MANUFACTURED BY RITTER MANUFACTURED BY RITTER BY RITTER BY RITTER RITTER RITTER PATTERN AND CASTING CO., 120 WATER STREET, NEW YORK, N.Y. OR APPROVED AND CASTING CO., 120 WATER STREET, NEW YORK, N.Y. OR APPROVED AND CASTING CO., 120 WATER STREET, NEW YORK, N.Y. OR APPROVED CASTING CO., 120 WATER STREET, NEW YORK, N.Y. OR APPROVED CASTING CO., 120 WATER STREET, NEW YORK, N.Y. OR APPROVED CO., 120 WATER STREET, NEW YORK, N.Y. OR APPROVED CO., 120 WATER STREET, NEW YORK, N.Y. OR APPROVED 120 WATER STREET, NEW YORK, N.Y. OR APPROVED 120 WATER STREET, NEW YORK, N.Y. OR APPROVED WATER STREET, NEW YORK, N.Y. OR APPROVED WATER STREET, NEW YORK, N.Y. OR APPROVED STREET, NEW YORK, N.Y. OR APPROVED STREET, NEW YORK, N.Y. OR APPROVED NEW YORK, N.Y. OR APPROVED NEW YORK, N.Y. OR APPROVED YORK, N.Y. OR APPROVED YORK, N.Y. OR APPROVED N.Y. OR APPROVED N.Y. OR APPROVED OR APPROVED OR APPROVED APPROVED APPROVED EQUAL, CHROME-PLATED STEEL PLATES WITH SET SCREW AND CONCEALED HINGE. SYSTEMS TESTING: UPON COMPLETION OF FABRICATION AND BEFORE ENCLOSING, INSULATING OR COMPLETION OF FABRICATION AND BEFORE ENCLOSING, INSULATING OR COMPLETION OF FABRICATION AND BEFORE ENCLOSING, INSULATING OR OF FABRICATION AND BEFORE ENCLOSING, INSULATING OR OF FABRICATION AND BEFORE ENCLOSING, INSULATING OR FABRICATION AND BEFORE ENCLOSING, INSULATING OR FABRICATION AND BEFORE ENCLOSING, INSULATING OR AND BEFORE ENCLOSING, INSULATING OR AND BEFORE ENCLOSING, INSULATING OR BEFORE ENCLOSING, INSULATING OR BEFORE ENCLOSING, INSULATING OR ENCLOSING, INSULATING OR ENCLOSING, INSULATING OR INSULATING OR INSULATING OR OR OR CONCEALING IN ANY WAY, ALL PIPING, MAINS AND JOINTS SHALL BE TESTED FOR IN ANY WAY, ALL PIPING, MAINS AND JOINTS SHALL BE TESTED FOR IN ANY WAY, ALL PIPING, MAINS AND JOINTS SHALL BE TESTED FOR ANY WAY, ALL PIPING, MAINS AND JOINTS SHALL BE TESTED FOR ANY WAY, ALL PIPING, MAINS AND JOINTS SHALL BE TESTED FOR WAY, ALL PIPING, MAINS AND JOINTS SHALL BE TESTED FOR WAY, ALL PIPING, MAINS AND JOINTS SHALL BE TESTED FOR ALL PIPING, MAINS AND JOINTS SHALL BE TESTED FOR ALL PIPING, MAINS AND JOINTS SHALL BE TESTED FOR PIPING, MAINS AND JOINTS SHALL BE TESTED FOR PIPING, MAINS AND JOINTS SHALL BE TESTED FOR MAINS AND JOINTS SHALL BE TESTED FOR MAINS AND JOINTS SHALL BE TESTED FOR AND JOINTS SHALL BE TESTED FOR AND JOINTS SHALL BE TESTED FOR JOINTS SHALL BE TESTED FOR JOINTS SHALL BE TESTED FOR SHALL BE TESTED FOR SHALL BE TESTED FOR BE TESTED FOR BE TESTED FOR TESTED FOR TESTED FOR FOR FOR LEAKS AT ONE AND ONE-HALF THEIR NORMAL WORKING PRESSURES. BEFORE AT ONE AND ONE-HALF THEIR NORMAL WORKING PRESSURES. BEFORE AT ONE AND ONE-HALF THEIR NORMAL WORKING PRESSURES. BEFORE ONE AND ONE-HALF THEIR NORMAL WORKING PRESSURES. BEFORE ONE AND ONE-HALF THEIR NORMAL WORKING PRESSURES. BEFORE AND ONE-HALF THEIR NORMAL WORKING PRESSURES. BEFORE AND ONE-HALF THEIR NORMAL WORKING PRESSURES. BEFORE ONE-HALF THEIR NORMAL WORKING PRESSURES. BEFORE ONE-HALF THEIR NORMAL WORKING PRESSURES. BEFORE THEIR NORMAL WORKING PRESSURES. BEFORE THEIR NORMAL WORKING PRESSURES. BEFORE NORMAL WORKING PRESSURES. BEFORE NORMAL WORKING PRESSURES. BEFORE WORKING PRESSURES. BEFORE WORKING PRESSURES. BEFORE PRESSURES. BEFORE PRESSURES. BEFORE BEFORE BEFORE TESTING PIPING, REMOVE OR OTHERWISE PROTECT FROM DAMAGE ALL SPECIALTIES PIPING, REMOVE OR OTHERWISE PROTECT FROM DAMAGE ALL SPECIALTIES PIPING, REMOVE OR OTHERWISE PROTECT FROM DAMAGE ALL SPECIALTIES REMOVE OR OTHERWISE PROTECT FROM DAMAGE ALL SPECIALTIES REMOVE OR OTHERWISE PROTECT FROM DAMAGE ALL SPECIALTIES OR OTHERWISE PROTECT FROM DAMAGE ALL SPECIALTIES OR OTHERWISE PROTECT FROM DAMAGE ALL SPECIALTIES OTHERWISE PROTECT FROM DAMAGE ALL SPECIALTIES OTHERWISE PROTECT FROM DAMAGE ALL SPECIALTIES PROTECT FROM DAMAGE ALL SPECIALTIES PROTECT FROM DAMAGE ALL SPECIALTIES FROM DAMAGE ALL SPECIALTIES FROM DAMAGE ALL SPECIALTIES DAMAGE ALL SPECIALTIES DAMAGE ALL SPECIALTIES ALL SPECIALTIES ALL SPECIALTIES SPECIALTIES SPECIALTIES AND EQUIPMENT NOT DESIGNED TO WITHSTAND TEST PRESSURES. THE CONTRACTOR EQUIPMENT NOT DESIGNED TO WITHSTAND TEST PRESSURES. THE CONTRACTOR EQUIPMENT NOT DESIGNED TO WITHSTAND TEST PRESSURES. THE CONTRACTOR NOT DESIGNED TO WITHSTAND TEST PRESSURES. THE CONTRACTOR NOT DESIGNED TO WITHSTAND TEST PRESSURES. THE CONTRACTOR DESIGNED TO WITHSTAND TEST PRESSURES. THE CONTRACTOR DESIGNED TO WITHSTAND TEST PRESSURES. THE CONTRACTOR TO WITHSTAND TEST PRESSURES. THE CONTRACTOR TO WITHSTAND TEST PRESSURES. THE CONTRACTOR WITHSTAND TEST PRESSURES. THE CONTRACTOR WITHSTAND TEST PRESSURES. THE CONTRACTOR TEST PRESSURES. THE CONTRACTOR TEST PRESSURES. THE CONTRACTOR PRESSURES. THE CONTRACTOR PRESSURES. THE CONTRACTOR THE CONTRACTOR THE CONTRACTOR CONTRACTOR CONTRACTOR SHALL NOTIFY THE ARCHITECT OR ENGINEER, IN ADVANCE, OF SCHEDULED TESTS SO NOTIFY THE ARCHITECT OR ENGINEER, IN ADVANCE, OF SCHEDULED TESTS SO NOTIFY THE ARCHITECT OR ENGINEER, IN ADVANCE, OF SCHEDULED TESTS SO THE ARCHITECT OR ENGINEER, IN ADVANCE, OF SCHEDULED TESTS SO THE ARCHITECT OR ENGINEER, IN ADVANCE, OF SCHEDULED TESTS SO ARCHITECT OR ENGINEER, IN ADVANCE, OF SCHEDULED TESTS SO ARCHITECT OR ENGINEER, IN ADVANCE, OF SCHEDULED TESTS SO OR ENGINEER, IN ADVANCE, OF SCHEDULED TESTS SO OR ENGINEER, IN ADVANCE, OF SCHEDULED TESTS SO ENGINEER, IN ADVANCE, OF SCHEDULED TESTS SO ENGINEER, IN ADVANCE, OF SCHEDULED TESTS SO IN ADVANCE, OF SCHEDULED TESTS SO IN ADVANCE, OF SCHEDULED TESTS SO ADVANCE, OF SCHEDULED TESTS SO ADVANCE, OF SCHEDULED TESTS SO OF SCHEDULED TESTS SO OF SCHEDULED TESTS SO SCHEDULED TESTS SO SCHEDULED TESTS SO TESTS SO TESTS SO SO SO THAT THE ARCHITECT OR ENGINEER MAY HAVE A REPRESENTATIVE PRESENT DURING THE ARCHITECT OR ENGINEER MAY HAVE A REPRESENTATIVE PRESENT DURING THE ARCHITECT OR ENGINEER MAY HAVE A REPRESENTATIVE PRESENT DURING ARCHITECT OR ENGINEER MAY HAVE A REPRESENTATIVE PRESENT DURING ARCHITECT OR ENGINEER MAY HAVE A REPRESENTATIVE PRESENT DURING OR ENGINEER MAY HAVE A REPRESENTATIVE PRESENT DURING OR ENGINEER MAY HAVE A REPRESENTATIVE PRESENT DURING ENGINEER MAY HAVE A REPRESENTATIVE PRESENT DURING ENGINEER MAY HAVE A REPRESENTATIVE PRESENT DURING MAY HAVE A REPRESENTATIVE PRESENT DURING MAY HAVE A REPRESENTATIVE PRESENT DURING HAVE A REPRESENTATIVE PRESENT DURING HAVE A REPRESENTATIVE PRESENT DURING A REPRESENTATIVE PRESENT DURING A REPRESENTATIVE PRESENT DURING REPRESENTATIVE PRESENT DURING REPRESENTATIVE PRESENT DURING PRESENT DURING PRESENT DURING DURING DURING ANY OR ALL TESTS. REPEAT ALL TESTS, AS REQUIRED, TO PROVE SYSTEM TIGHT OR ALL TESTS. REPEAT ALL TESTS, AS REQUIRED, TO PROVE SYSTEM TIGHT OR ALL TESTS. REPEAT ALL TESTS, AS REQUIRED, TO PROVE SYSTEM TIGHT ALL TESTS. REPEAT ALL TESTS, AS REQUIRED, TO PROVE SYSTEM TIGHT ALL TESTS. REPEAT ALL TESTS, AS REQUIRED, TO PROVE SYSTEM TIGHT TESTS. REPEAT ALL TESTS, AS REQUIRED, TO PROVE SYSTEM TIGHT TESTS. REPEAT ALL TESTS, AS REQUIRED, TO PROVE SYSTEM TIGHT REPEAT ALL TESTS, AS REQUIRED, TO PROVE SYSTEM TIGHT REPEAT ALL TESTS, AS REQUIRED, TO PROVE SYSTEM TIGHT REPEAT ALL TESTS, AS REQUIRED, TO PROVE SYSTEM TIGHT ALL TESTS, AS REQUIRED, TO PROVE SYSTEM TIGHT ALL TESTS, AS REQUIRED, TO PROVE SYSTEM TIGHT TESTS, AS REQUIRED, TO PROVE SYSTEM TIGHT TESTS, AS REQUIRED, TO PROVE SYSTEM TIGHT AS REQUIRED, TO PROVE SYSTEM TIGHT AS REQUIRED, TO PROVE SYSTEM TIGHT REQUIRED, TO PROVE SYSTEM TIGHT REQUIRED, TO PROVE SYSTEM TIGHT TO PROVE SYSTEM TIGHT TO PROVE SYSTEM TIGHT PROVE SYSTEM TIGHT PROVE SYSTEM TIGHT SYSTEM TIGHT SYSTEM TIGHT TIGHT TIGHT AND IN PERFECT OPERATING CONDITION. PREPARE REPORT OF RECOMMENDATIONS IN PERFECT OPERATING CONDITION. PREPARE REPORT OF RECOMMENDATIONS IN PERFECT OPERATING CONDITION. PREPARE REPORT OF RECOMMENDATIONS PERFECT OPERATING CONDITION. PREPARE REPORT OF RECOMMENDATIONS PERFECT OPERATING CONDITION. PREPARE REPORT OF RECOMMENDATIONS OPERATING CONDITION. PREPARE REPORT OF RECOMMENDATIONS OPERATING CONDITION. PREPARE REPORT OF RECOMMENDATIONS CONDITION. PREPARE REPORT OF RECOMMENDATIONS CONDITION. PREPARE REPORT OF RECOMMENDATIONS PREPARE REPORT OF RECOMMENDATIONS PREPARE REPORT OF RECOMMENDATIONS REPORT OF RECOMMENDATIONS REPORT OF RECOMMENDATIONS OF RECOMMENDATIONS OF RECOMMENDATIONS RECOMMENDATIONS RECOMMENDATIONS FOR CORRECTING UNSATISFACTORY MECHANICAL PERFORMANCES WHEN SYSTEM CORRECTING UNSATISFACTORY MECHANICAL PERFORMANCES WHEN SYSTEM CORRECTING UNSATISFACTORY MECHANICAL PERFORMANCES WHEN SYSTEM UNSATISFACTORY MECHANICAL PERFORMANCES WHEN SYSTEM UNSATISFACTORY MECHANICAL PERFORMANCES WHEN SYSTEM MECHANICAL PERFORMANCES WHEN SYSTEM MECHANICAL PERFORMANCES WHEN SYSTEM PERFORMANCES WHEN SYSTEM PERFORMANCES WHEN SYSTEM WHEN SYSTEM WHEN SYSTEM SYSTEM SYSTEM CANNOT BE SUCCESSFULLY BALANCED; INCLUDING, WHERE NECESSARY, BE SUCCESSFULLY BALANCED; INCLUDING, WHERE NECESSARY, BE SUCCESSFULLY BALANCED; INCLUDING, WHERE NECESSARY, SUCCESSFULLY BALANCED; INCLUDING, WHERE NECESSARY, SUCCESSFULLY BALANCED; INCLUDING, WHERE NECESSARY, BALANCED; INCLUDING, WHERE NECESSARY, BALANCED; INCLUDING, WHERE NECESSARY, INCLUDING, WHERE NECESSARY, INCLUDING, WHERE NECESSARY, WHERE NECESSARY, WHERE NECESSARY, NECESSARY, NECESSARY, MODIFICATIONS WHICH EXCEED REQUIREMENTS OF CONTRACT DOCUMENTS FOR WHICH EXCEED REQUIREMENTS OF CONTRACT DOCUMENTS FOR WHICH EXCEED REQUIREMENTS OF CONTRACT DOCUMENTS FOR EXCEED REQUIREMENTS OF CONTRACT DOCUMENTS FOR EXCEED REQUIREMENTS OF CONTRACT DOCUMENTS FOR REQUIREMENTS OF CONTRACT DOCUMENTS FOR REQUIREMENTS OF CONTRACT DOCUMENTS FOR OF CONTRACT DOCUMENTS FOR OF CONTRACT DOCUMENTS FOR CONTRACT DOCUMENTS FOR CONTRACT DOCUMENTS FOR DOCUMENTS FOR DOCUMENTS FOR FOR FOR PLUMBING WORK. TESTING MAY BE DONE IN SECTIONS TO FACILITATE CONSTRUCTION. WORK. TESTING MAY BE DONE IN SECTIONS TO FACILITATE CONSTRUCTION. WORK. TESTING MAY BE DONE IN SECTIONS TO FACILITATE CONSTRUCTION. TESTING MAY BE DONE IN SECTIONS TO FACILITATE CONSTRUCTION. TESTING MAY BE DONE IN SECTIONS TO FACILITATE CONSTRUCTION. MAY BE DONE IN SECTIONS TO FACILITATE CONSTRUCTION. MAY BE DONE IN SECTIONS TO FACILITATE CONSTRUCTION. BE DONE IN SECTIONS TO FACILITATE CONSTRUCTION. BE DONE IN SECTIONS TO FACILITATE CONSTRUCTION. DONE IN SECTIONS TO FACILITATE CONSTRUCTION. DONE IN SECTIONS TO FACILITATE CONSTRUCTION. IN SECTIONS TO FACILITATE CONSTRUCTION. IN SECTIONS TO FACILITATE CONSTRUCTION. SECTIONS TO FACILITATE CONSTRUCTION. SECTIONS TO FACILITATE CONSTRUCTION. TO FACILITATE CONSTRUCTION. TO FACILITATE CONSTRUCTION. FACILITATE CONSTRUCTION. FACILITATE CONSTRUCTION. CONSTRUCTION. CONSTRUCTION. IF INSPECTION OR TESTS INDICATE DEFECTS, SUCH DEFECTIVE WORK OR MATERIAL INSPECTION OR TESTS INDICATE DEFECTS, SUCH DEFECTIVE WORK OR MATERIAL INSPECTION OR TESTS INDICATE DEFECTS, SUCH DEFECTIVE WORK OR MATERIAL OR TESTS INDICATE DEFECTS, SUCH DEFECTIVE WORK OR MATERIAL OR TESTS INDICATE DEFECTS, SUCH DEFECTIVE WORK OR MATERIAL TESTS INDICATE DEFECTS, SUCH DEFECTIVE WORK OR MATERIAL TESTS INDICATE DEFECTS, SUCH DEFECTIVE WORK OR MATERIAL INDICATE DEFECTS, SUCH DEFECTIVE WORK OR MATERIAL INDICATE DEFECTS, SUCH DEFECTIVE WORK OR MATERIAL DEFECTS, SUCH DEFECTIVE WORK OR MATERIAL DEFECTS, SUCH DEFECTIVE WORK OR MATERIAL SUCH DEFECTIVE WORK OR MATERIAL SUCH DEFECTIVE WORK OR MATERIAL DEFECTIVE WORK OR MATERIAL DEFECTIVE WORK OR MATERIAL WORK OR MATERIAL WORK OR MATERIAL OR MATERIAL OR MATERIAL MATERIAL MATERIAL SHALL BE REPLACED OR REPAIRED AS NECESSARY AND INSPECTION AND TESTS BE REPLACED OR REPAIRED AS NECESSARY AND INSPECTION AND TESTS BE REPLACED OR REPAIRED AS NECESSARY AND INSPECTION AND TESTS REPLACED OR REPAIRED AS NECESSARY AND INSPECTION AND TESTS REPLACED OR REPAIRED AS NECESSARY AND INSPECTION AND TESTS OR REPAIRED AS NECESSARY AND INSPECTION AND TESTS OR REPAIRED AS NECESSARY AND INSPECTION AND TESTS REPAIRED AS NECESSARY AND INSPECTION AND TESTS REPAIRED AS NECESSARY AND INSPECTION AND TESTS AS NECESSARY AND INSPECTION AND TESTS AS NECESSARY AND INSPECTION AND TESTS NECESSARY AND INSPECTION AND TESTS NECESSARY AND INSPECTION AND TESTS AND INSPECTION AND TESTS AND INSPECTION AND TESTS INSPECTION AND TESTS INSPECTION AND TESTS AND TESTS AND TESTS TESTS TESTS REPEATED. REPAIRS TO PIPING SHALL BE MADE WITH NEW MATERIALS. THE REPAIRS TO PIPING SHALL BE MADE WITH NEW MATERIALS. THE REPAIRS TO PIPING SHALL BE MADE WITH NEW MATERIALS. THE REPAIRS TO PIPING SHALL BE MADE WITH NEW MATERIALS. THE TO PIPING SHALL BE MADE WITH NEW MATERIALS. THE TO PIPING SHALL BE MADE WITH NEW MATERIALS. THE PIPING SHALL BE MADE WITH NEW MATERIALS. THE PIPING SHALL BE MADE WITH NEW MATERIALS. THE SHALL BE MADE WITH NEW MATERIALS. THE SHALL BE MADE WITH NEW MATERIALS. THE BE MADE WITH NEW MATERIALS. THE BE MADE WITH NEW MATERIALS. THE MADE WITH NEW MATERIALS. THE MADE WITH NEW MATERIALS. THE WITH NEW MATERIALS. THE WITH NEW MATERIALS. THE NEW MATERIALS. THE NEW MATERIALS. THE MATERIALS. THE MATERIALS. THE THE THE THE SANITARY, WASTE AND VENTING SYSTEMS, SHALL BE TESTED WHEN COMPLETELY WASTE AND VENTING SYSTEMS, SHALL BE TESTED WHEN COMPLETELY WASTE AND VENTING SYSTEMS, SHALL BE TESTED WHEN COMPLETELY AND VENTING SYSTEMS, SHALL BE TESTED WHEN COMPLETELY AND VENTING SYSTEMS, SHALL BE TESTED WHEN COMPLETELY VENTING SYSTEMS, SHALL BE TESTED WHEN COMPLETELY VENTING SYSTEMS, SHALL BE TESTED WHEN COMPLETELY SYSTEMS, SHALL BE TESTED WHEN COMPLETELY SYSTEMS, SHALL BE TESTED WHEN COMPLETELY SHALL BE TESTED WHEN COMPLETELY SHALL BE TESTED WHEN COMPLETELY BE TESTED WHEN COMPLETELY BE TESTED WHEN COMPLETELY TESTED WHEN COMPLETELY TESTED WHEN COMPLETELY WHEN COMPLETELY WHEN COMPLETELY COMPLETELY COMPLETELY ROUGHED-IN, EXCEPTING FIXTURE TRAPS, BY PLUGGING OR CAPPING ALL OUTLETS EXCEPTING FIXTURE TRAPS, BY PLUGGING OR CAPPING ALL OUTLETS EXCEPTING FIXTURE TRAPS, BY PLUGGING OR CAPPING ALL OUTLETS FIXTURE TRAPS, BY PLUGGING OR CAPPING ALL OUTLETS FIXTURE TRAPS, BY PLUGGING OR CAPPING ALL OUTLETS TRAPS, BY PLUGGING OR CAPPING ALL OUTLETS TRAPS, BY PLUGGING OR CAPPING ALL OUTLETS BY PLUGGING OR CAPPING ALL OUTLETS BY PLUGGING OR CAPPING ALL OUTLETS PLUGGING OR CAPPING ALL OUTLETS PLUGGING OR CAPPING ALL OUTLETS OR CAPPING ALL OUTLETS OR CAPPING ALL OUTLETS CAPPING ALL OUTLETS CAPPING ALL OUTLETS ALL OUTLETS ALL OUTLETS OUTLETS OUTLETS EXCEPT STACKS ABOVE THE ROOF AND FILLING THE ENTIRE SYSTEM WITH WATER. STACKS ABOVE THE ROOF AND FILLING THE ENTIRE SYSTEM WITH WATER. STACKS ABOVE THE ROOF AND FILLING THE ENTIRE SYSTEM WITH WATER. ABOVE THE ROOF AND FILLING THE ENTIRE SYSTEM WITH WATER. ABOVE THE ROOF AND FILLING THE ENTIRE SYSTEM WITH WATER. THE ROOF AND FILLING THE ENTIRE SYSTEM WITH WATER. THE ROOF AND FILLING THE ENTIRE SYSTEM WITH WATER. ROOF AND FILLING THE ENTIRE SYSTEM WITH WATER. ROOF AND FILLING THE ENTIRE SYSTEM WITH WATER. AND FILLING THE ENTIRE SYSTEM WITH WATER. AND FILLING THE ENTIRE SYSTEM WITH WATER. FILLING THE ENTIRE SYSTEM WITH WATER. FILLING THE ENTIRE SYSTEM WITH WATER. THE ENTIRE SYSTEM WITH WATER. THE ENTIRE SYSTEM WITH WATER. ENTIRE SYSTEM WITH WATER. ENTIRE SYSTEM WITH WATER. SYSTEM WITH WATER. SYSTEM WITH WATER. WITH WATER. WITH WATER. WATER. WATER. PLUMBER'S TESTING PLUGS SHALL BE USED IN OPENINGS WHERE REQUIRED. TEST TESTING PLUGS SHALL BE USED IN OPENINGS WHERE REQUIRED. TEST TESTING PLUGS SHALL BE USED IN OPENINGS WHERE REQUIRED. TEST PLUGS SHALL BE USED IN OPENINGS WHERE REQUIRED. TEST PLUGS SHALL BE USED IN OPENINGS WHERE REQUIRED. TEST SHALL BE USED IN OPENINGS WHERE REQUIRED. TEST SHALL BE USED IN OPENINGS WHERE REQUIRED. TEST BE USED IN OPENINGS WHERE REQUIRED. TEST BE USED IN OPENINGS WHERE REQUIRED. TEST USED IN OPENINGS WHERE REQUIRED. TEST USED IN OPENINGS WHERE REQUIRED. TEST IN OPENINGS WHERE REQUIRED. TEST IN OPENINGS WHERE REQUIRED. TEST OPENINGS WHERE REQUIRED. TEST OPENINGS WHERE REQUIRED. TEST WHERE REQUIRED. TEST WHERE REQUIRED. TEST REQUIRED. TEST REQUIRED. TEST TEST TEST SHALL BE PREFORMED USING AIR AT 5 PSIG. SYSTEM IDENTIFICATION: ALL EQUIPMENT SHALL BE IDENTIFIED WITH PERMANENT PHENOLIC NAMEPLATES WITH EQUIPMENT SHALL BE IDENTIFIED WITH PERMANENT PHENOLIC NAMEPLATES WITH EQUIPMENT SHALL BE IDENTIFIED WITH PERMANENT PHENOLIC NAMEPLATES WITH SHALL BE IDENTIFIED WITH PERMANENT PHENOLIC NAMEPLATES WITH SHALL BE IDENTIFIED WITH PERMANENT PHENOLIC NAMEPLATES WITH BE IDENTIFIED WITH PERMANENT PHENOLIC NAMEPLATES WITH BE IDENTIFIED WITH PERMANENT PHENOLIC NAMEPLATES WITH IDENTIFIED WITH PERMANENT PHENOLIC NAMEPLATES WITH IDENTIFIED WITH PERMANENT PHENOLIC NAMEPLATES WITH WITH PERMANENT PHENOLIC NAMEPLATES WITH WITH PERMANENT PHENOLIC NAMEPLATES WITH PERMANENT PHENOLIC NAMEPLATES WITH PERMANENT PHENOLIC NAMEPLATES WITH PHENOLIC NAMEPLATES WITH PHENOLIC NAMEPLATES WITH NAMEPLATES WITH NAMEPLATES WITH WITH WITH 1/2" LETTERS. LABEL ALL VALVES WITH 1 1/2" ROUND BRASS TAG SWITCH BLANK LETTERS. LABEL ALL VALVES WITH 1 1/2" ROUND BRASS TAG SWITCH BLANK LETTERS. LABEL ALL VALVES WITH 1 1/2" ROUND BRASS TAG SWITCH BLANK LABEL ALL VALVES WITH 1 1/2" ROUND BRASS TAG SWITCH BLANK LABEL ALL VALVES WITH 1 1/2" ROUND BRASS TAG SWITCH BLANK ALL VALVES WITH 1 1/2" ROUND BRASS TAG SWITCH BLANK ALL VALVES WITH 1 1/2" ROUND BRASS TAG SWITCH BLANK VALVES WITH 1 1/2" ROUND BRASS TAG SWITCH BLANK VALVES WITH 1 1/2" ROUND BRASS TAG SWITCH BLANK WITH 1 1/2" ROUND BRASS TAG SWITCH BLANK WITH 1 1/2" ROUND BRASS TAG SWITCH BLANK 1 1/2" ROUND BRASS TAG SWITCH BLANK 1 1/2" ROUND BRASS TAG SWITCH BLANK 1/2" ROUND BRASS TAG SWITCH BLANK 1/2" ROUND BRASS TAG SWITCH BLANK ROUND BRASS TAG SWITCH BLANK ROUND BRASS TAG SWITCH BLANK BRASS TAG SWITCH BLANK BRASS TAG SWITCH BLANK TAG SWITCH BLANK TAG SWITCH BLANK SWITCH BLANK SWITCH BLANK BLANK BLANK PHENOLIC TAG WITH WHITE LETTERS, SECURED WITH BRASS CHAIN. POST A TAG WITH WHITE LETTERS, SECURED WITH BRASS CHAIN. POST A TAG WITH WHITE LETTERS, SECURED WITH BRASS CHAIN. POST A WITH WHITE LETTERS, SECURED WITH BRASS CHAIN. POST A WITH WHITE LETTERS, SECURED WITH BRASS CHAIN. POST A WHITE LETTERS, SECURED WITH BRASS CHAIN. POST A WHITE LETTERS, SECURED WITH BRASS CHAIN. POST A LETTERS, SECURED WITH BRASS CHAIN. POST A LETTERS, SECURED WITH BRASS CHAIN. POST A SECURED WITH BRASS CHAIN. POST A SECURED WITH BRASS CHAIN. POST A WITH BRASS CHAIN. POST A WITH BRASS CHAIN. POST A BRASS CHAIN. POST A BRASS CHAIN. POST A CHAIN. POST A CHAIN. POST A POST A POST A POST A A A PERMANENT FRAMED VALVE CHART IN THE BOILER ROOM INCLUDING VALVE NUMBER, FRAMED VALVE CHART IN THE BOILER ROOM INCLUDING VALVE NUMBER, FRAMED VALVE CHART IN THE BOILER ROOM INCLUDING VALVE NUMBER, VALVE CHART IN THE BOILER ROOM INCLUDING VALVE NUMBER, VALVE CHART IN THE BOILER ROOM INCLUDING VALVE NUMBER, CHART IN THE BOILER ROOM INCLUDING VALVE NUMBER, CHART IN THE BOILER ROOM INCLUDING VALVE NUMBER, IN THE BOILER ROOM INCLUDING VALVE NUMBER, IN THE BOILER ROOM INCLUDING VALVE NUMBER, THE BOILER ROOM INCLUDING VALVE NUMBER, THE BOILER ROOM INCLUDING VALVE NUMBER, BOILER ROOM INCLUDING VALVE NUMBER, BOILER ROOM INCLUDING VALVE NUMBER, ROOM INCLUDING VALVE NUMBER, ROOM INCLUDING VALVE NUMBER, INCLUDING VALVE NUMBER, INCLUDING VALVE NUMBER, VALVE NUMBER, VALVE NUMBER, NUMBER, NUMBER, LOCATION AND VALVE SERVICE (HEATING, DOMESTIC COLD ETC.). LABEL ALL PIPING AND VALVE SERVICE (HEATING, DOMESTIC COLD ETC.). LABEL ALL PIPING AND VALVE SERVICE (HEATING, DOMESTIC COLD ETC.). LABEL ALL PIPING VALVE SERVICE (HEATING, DOMESTIC COLD ETC.). LABEL ALL PIPING VALVE SERVICE (HEATING, DOMESTIC COLD ETC.). LABEL ALL PIPING SERVICE (HEATING, DOMESTIC COLD ETC.). LABEL ALL PIPING SERVICE (HEATING, DOMESTIC COLD ETC.). LABEL ALL PIPING (HEATING, DOMESTIC COLD ETC.). LABEL ALL PIPING (HEATING, DOMESTIC COLD ETC.). LABEL ALL PIPING DOMESTIC COLD ETC.). LABEL ALL PIPING DOMESTIC COLD ETC.). LABEL ALL PIPING COLD ETC.). LABEL ALL PIPING COLD ETC.). LABEL ALL PIPING ETC.). LABEL ALL PIPING ETC.). LABEL ALL PIPING LABEL ALL PIPING LABEL ALL PIPING ALL PIPING ALL PIPING PIPING PIPING THROUGHOUT THE BUILDING WITH SETON STYLE "B" WRAP AROUND VINYL PIPE THE BUILDING WITH SETON STYLE "B" WRAP AROUND VINYL PIPE THE BUILDING WITH SETON STYLE "B" WRAP AROUND VINYL PIPE BUILDING WITH SETON STYLE "B" WRAP AROUND VINYL PIPE BUILDING WITH SETON STYLE "B" WRAP AROUND VINYL PIPE WITH SETON STYLE "B" WRAP AROUND VINYL PIPE WITH SETON STYLE "B" WRAP AROUND VINYL PIPE SETON STYLE "B" WRAP AROUND VINYL PIPE SETON STYLE "B" WRAP AROUND VINYL PIPE STYLE "B" WRAP AROUND VINYL PIPE STYLE "B" WRAP AROUND VINYL PIPE "B" WRAP AROUND VINYL PIPE "B" WRAP AROUND VINYL PIPE WRAP AROUND VINYL PIPE WRAP AROUND VINYL PIPE AROUND VINYL PIPE AROUND VINYL PIPE VINYL PIPE VINYL PIPE PIPE PIPE LABELS WITH 1" HIGH LETTERS. LABELS SHALL INCLUDE DIRECTION ARROWS AND WITH 1" HIGH LETTERS. LABELS SHALL INCLUDE DIRECTION ARROWS AND WITH 1" HIGH LETTERS. LABELS SHALL INCLUDE DIRECTION ARROWS AND 1" HIGH LETTERS. LABELS SHALL INCLUDE DIRECTION ARROWS AND 1" HIGH LETTERS. LABELS SHALL INCLUDE DIRECTION ARROWS AND HIGH LETTERS. LABELS SHALL INCLUDE DIRECTION ARROWS AND HIGH LETTERS. LABELS SHALL INCLUDE DIRECTION ARROWS AND LETTERS. LABELS SHALL INCLUDE DIRECTION ARROWS AND LETTERS. LABELS SHALL INCLUDE DIRECTION ARROWS AND LABELS SHALL INCLUDE DIRECTION ARROWS AND LABELS SHALL INCLUDE DIRECTION ARROWS AND LABELS SHALL INCLUDE DIRECTION ARROWS AND SHALL INCLUDE DIRECTION ARROWS AND SHALL INCLUDE DIRECTION ARROWS AND INCLUDE DIRECTION ARROWS AND INCLUDE DIRECTION ARROWS AND DIRECTION ARROWS AND DIRECTION ARROWS AND ARROWS AND ARROWS AND AND AND ZONES SERVED. PIPE AND FITTINGS: HEATING PIPING: HYDRONIC HEATING SYSTEM PIPING SHALL BE TYPE "L" HARD PIPING: HYDRONIC HEATING SYSTEM PIPING SHALL BE TYPE "L" HARD PIPING: HYDRONIC HEATING SYSTEM PIPING SHALL BE TYPE "L" HARD HYDRONIC HEATING SYSTEM PIPING SHALL BE TYPE "L" HARD HYDRONIC HEATING SYSTEM PIPING SHALL BE TYPE "L" HARD HYDRONIC HEATING SYSTEM PIPING SHALL BE TYPE "L" HARD HEATING SYSTEM PIPING SHALL BE TYPE "L" HARD HEATING SYSTEM PIPING SHALL BE TYPE "L" HARD SYSTEM PIPING SHALL BE TYPE "L" HARD SYSTEM PIPING SHALL BE TYPE "L" HARD PIPING SHALL BE TYPE "L" HARD PIPING SHALL BE TYPE "L" HARD SHALL BE TYPE "L" HARD SHALL BE TYPE "L" HARD BE TYPE "L" HARD BE TYPE "L" HARD TYPE "L" HARD TYPE "L" HARD "L" HARD "L" HARD HARD HARD COPPER TUBING WITH WROUGHT COPPER FITTINGS FOR SOLDER FITTING ASSEMBLY. ALL SOIL, WASTE AND VENT PIPING SHALL BE ASTM D-1785, AND ASTM D-2665 SOIL, WASTE AND VENT PIPING SHALL BE ASTM D-1785, AND ASTM D-2665 SOIL, WASTE AND VENT PIPING SHALL BE ASTM D-1785, AND ASTM D-2665 WASTE AND VENT PIPING SHALL BE ASTM D-1785, AND ASTM D-2665 WASTE AND VENT PIPING SHALL BE ASTM D-1785, AND ASTM D-2665 AND VENT PIPING SHALL BE ASTM D-1785, AND ASTM D-2665 AND VENT PIPING SHALL BE ASTM D-1785, AND ASTM D-2665 VENT PIPING SHALL BE ASTM D-1785, AND ASTM D-2665 VENT PIPING SHALL BE ASTM D-1785, AND ASTM D-2665 PIPING SHALL BE ASTM D-1785, AND ASTM D-2665 PIPING SHALL BE ASTM D-1785, AND ASTM D-2665 SHALL BE ASTM D-1785, AND ASTM D-2665 SHALL BE ASTM D-1785, AND ASTM D-2665 BE ASTM D-1785, AND ASTM D-2665 BE ASTM D-1785, AND ASTM D-2665 ASTM D-1785, AND ASTM D-2665 ASTM D-1785, AND ASTM D-2665 D-1785, AND ASTM D-2665 D-1785, AND ASTM D-2665 AND ASTM D-2665 AND ASTM D-2665 ASTM D-2665 ASTM D-2665 D-2665 D-2665 SCHEDULE 40, PVC-DWV PIPE. FITTINGS SHALL CONFORM TO ASTM D-2665 AND 40, PVC-DWV PIPE. FITTINGS SHALL CONFORM TO ASTM D-2665 AND 40, PVC-DWV PIPE. FITTINGS SHALL CONFORM TO ASTM D-2665 AND PVC-DWV PIPE. FITTINGS SHALL CONFORM TO ASTM D-2665 AND PVC-DWV PIPE. FITTINGS SHALL CONFORM TO ASTM D-2665 AND PIPE. FITTINGS SHALL CONFORM TO ASTM D-2665 AND PIPE. FITTINGS SHALL CONFORM TO ASTM D-2665 AND FITTINGS SHALL CONFORM TO ASTM D-2665 AND FITTINGS SHALL CONFORM TO ASTM D-2665 AND FITTINGS SHALL CONFORM TO ASTM D-2665 AND SHALL CONFORM TO ASTM D-2665 AND SHALL CONFORM TO ASTM D-2665 AND CONFORM TO ASTM D-2665 AND CONFORM TO ASTM D-2665 AND TO ASTM D-2665 AND TO ASTM D-2665 AND ASTM D-2665 AND ASTM D-2665 AND D-2665 AND D-2665 AND AND AND SHALL BE PVC-DWV FITTINGS. ALL JOINTS SHALL BE CUT SQUARE, DE-BURRED, BE PVC-DWV FITTINGS. ALL JOINTS SHALL BE CUT SQUARE, DE-BURRED, BE PVC-DWV FITTINGS. ALL JOINTS SHALL BE CUT SQUARE, DE-BURRED, PVC-DWV FITTINGS. ALL JOINTS SHALL BE CUT SQUARE, DE-BURRED, PVC-DWV FITTINGS. ALL JOINTS SHALL BE CUT SQUARE, DE-BURRED, FITTINGS. ALL JOINTS SHALL BE CUT SQUARE, DE-BURRED, FITTINGS. ALL JOINTS SHALL BE CUT SQUARE, DE-BURRED, ALL JOINTS SHALL BE CUT SQUARE, DE-BURRED, ALL JOINTS SHALL BE CUT SQUARE, DE-BURRED, JOINTS SHALL BE CUT SQUARE, DE-BURRED, JOINTS SHALL BE CUT SQUARE, DE-BURRED, SHALL BE CUT SQUARE, DE-BURRED, SHALL BE CUT SQUARE, DE-BURRED, BE CUT SQUARE, DE-BURRED, BE CUT SQUARE, DE-BURRED, CUT SQUARE, DE-BURRED, CUT SQUARE, DE-BURRED, SQUARE, DE-BURRED, SQUARE, DE-BURRED, DE-BURRED, DE-BURRED, CLEANED AND THEN PRIMED WITH A COLORED SOLVENT BASED PRIMER. USE AND THEN PRIMED WITH A COLORED SOLVENT BASED PRIMER. USE AND THEN PRIMED WITH A COLORED SOLVENT BASED PRIMER. USE THEN PRIMED WITH A COLORED SOLVENT BASED PRIMER. USE THEN PRIMED WITH A COLORED SOLVENT BASED PRIMER. USE PRIMED WITH A COLORED SOLVENT BASED PRIMER. USE PRIMED WITH A COLORED SOLVENT BASED PRIMER. USE WITH A COLORED SOLVENT BASED PRIMER. USE WITH A COLORED SOLVENT BASED PRIMER. USE A COLORED SOLVENT BASED PRIMER. USE A COLORED SOLVENT BASED PRIMER. USE COLORED SOLVENT BASED PRIMER. USE COLORED SOLVENT BASED PRIMER. USE SOLVENT BASED PRIMER. USE SOLVENT BASED PRIMER. USE BASED PRIMER. USE BASED PRIMER. USE PRIMER. USE PRIMER. USE USE USE USE SOLVENT BASED CEMENT TO WELDED FITTINGS FOLLOWING PRIMER APPLICATION. USE BASED CEMENT TO WELDED FITTINGS FOLLOWING PRIMER APPLICATION. USE BASED CEMENT TO WELDED FITTINGS FOLLOWING PRIMER APPLICATION. USE CEMENT TO WELDED FITTINGS FOLLOWING PRIMER APPLICATION. USE CEMENT TO WELDED FITTINGS FOLLOWING PRIMER APPLICATION. USE TO WELDED FITTINGS FOLLOWING PRIMER APPLICATION. USE TO WELDED FITTINGS FOLLOWING PRIMER APPLICATION. USE WELDED FITTINGS FOLLOWING PRIMER APPLICATION. USE WELDED FITTINGS FOLLOWING PRIMER APPLICATION. USE FITTINGS FOLLOWING PRIMER APPLICATION. USE FITTINGS FOLLOWING PRIMER APPLICATION. USE FOLLOWING PRIMER APPLICATION. USE FOLLOWING PRIMER APPLICATION. USE PRIMER APPLICATION. USE PRIMER APPLICATION. USE APPLICATION. USE APPLICATION. USE USE USE TINTED PRIMER ON ALL FITTINGS. HOT AND COLD WATER DISTRIBUTION PIPING SHALL BE TYPE "L" HARD TEMPER AND COLD WATER DISTRIBUTION PIPING SHALL BE TYPE "L" HARD TEMPER AND COLD WATER DISTRIBUTION PIPING SHALL BE TYPE "L" HARD TEMPER COLD WATER DISTRIBUTION PIPING SHALL BE TYPE "L" HARD TEMPER COLD WATER DISTRIBUTION PIPING SHALL BE TYPE "L" HARD TEMPER WATER DISTRIBUTION PIPING SHALL BE TYPE "L" HARD TEMPER WATER DISTRIBUTION PIPING SHALL BE TYPE "L" HARD TEMPER DISTRIBUTION PIPING SHALL BE TYPE "L" HARD TEMPER DISTRIBUTION PIPING SHALL BE TYPE "L" HARD TEMPER PIPING SHALL BE TYPE "L" HARD TEMPER PIPING SHALL BE TYPE "L" HARD TEMPER SHALL BE TYPE "L" HARD TEMPER SHALL BE TYPE "L" HARD TEMPER BE TYPE "L" HARD TEMPER BE TYPE "L" HARD TEMPER TYPE "L" HARD TEMPER TYPE "L" HARD TEMPER "L" HARD TEMPER "L" HARD TEMPER HARD TEMPER HARD TEMPER TEMPER TEMPER COPPER TUBING, ASTM B-88. FITTINGS SHALL BE WROUGHT COPPER SOLDER JOINT TUBING, ASTM B-88. FITTINGS SHALL BE WROUGHT COPPER SOLDER JOINT TUBING, ASTM B-88. FITTINGS SHALL BE WROUGHT COPPER SOLDER JOINT ASTM B-88. FITTINGS SHALL BE WROUGHT COPPER SOLDER JOINT ASTM B-88. FITTINGS SHALL BE WROUGHT COPPER SOLDER JOINT B-88. FITTINGS SHALL BE WROUGHT COPPER SOLDER JOINT B-88. FITTINGS SHALL BE WROUGHT COPPER SOLDER JOINT FITTINGS SHALL BE WROUGHT COPPER SOLDER JOINT FITTINGS SHALL BE WROUGHT COPPER SOLDER JOINT FITTINGS SHALL BE WROUGHT COPPER SOLDER JOINT SHALL BE WROUGHT COPPER SOLDER JOINT SHALL BE WROUGHT COPPER SOLDER JOINT BE WROUGHT COPPER SOLDER JOINT BE WROUGHT COPPER SOLDER JOINT WROUGHT COPPER SOLDER JOINT WROUGHT COPPER SOLDER JOINT COPPER SOLDER JOINT COPPER SOLDER JOINT SOLDER JOINT SOLDER JOINT JOINT JOINT TYPE. USE SILERBRITE LEAD-FREE SOLDER WITH SUITABLE FLUX FOR JOINING PIPE USE SILERBRITE LEAD-FREE SOLDER WITH SUITABLE FLUX FOR JOINING PIPE USE SILERBRITE LEAD-FREE SOLDER WITH SUITABLE FLUX FOR JOINING PIPE USE SILERBRITE LEAD-FREE SOLDER WITH SUITABLE FLUX FOR JOINING PIPE SILERBRITE LEAD-FREE SOLDER WITH SUITABLE FLUX FOR JOINING PIPE SILERBRITE LEAD-FREE SOLDER WITH SUITABLE FLUX FOR JOINING PIPE LEAD-FREE SOLDER WITH SUITABLE FLUX FOR JOINING PIPE LEAD-FREE SOLDER WITH SUITABLE FLUX FOR JOINING PIPE SOLDER WITH SUITABLE FLUX FOR JOINING PIPE SOLDER WITH SUITABLE FLUX FOR JOINING PIPE WITH SUITABLE FLUX FOR JOINING PIPE WITH SUITABLE FLUX FOR JOINING PIPE SUITABLE FLUX FOR JOINING PIPE SUITABLE FLUX FOR JOINING PIPE FLUX FOR JOINING PIPE FLUX FOR JOINING PIPE FOR JOINING PIPE FOR JOINING PIPE JOINING PIPE JOINING PIPE PIPE PIPE AND FITTINGS. UNIONS SHALL BE OF THE SAME CLASS AND MATERIAL AS THE PIPE AND FITTINGS SHALL BE OF THE SAME CLASS AND MATERIAL AS THE PIPE AND FITTINGS SHALL BE OF THE SAME CLASS AND MATERIAL AS THE PIPE AND FITTINGS BE OF THE SAME CLASS AND MATERIAL AS THE PIPE AND FITTINGS BE OF THE SAME CLASS AND MATERIAL AS THE PIPE AND FITTINGS OF THE SAME CLASS AND MATERIAL AS THE PIPE AND FITTINGS OF THE SAME CLASS AND MATERIAL AS THE PIPE AND FITTINGS THE SAME CLASS AND MATERIAL AS THE PIPE AND FITTINGS THE SAME CLASS AND MATERIAL AS THE PIPE AND FITTINGS SAME CLASS AND MATERIAL AS THE PIPE AND FITTINGS SAME CLASS AND MATERIAL AS THE PIPE AND FITTINGS CLASS AND MATERIAL AS THE PIPE AND FITTINGS CLASS AND MATERIAL AS THE PIPE AND FITTINGS AND MATERIAL AS THE PIPE AND FITTINGS AND MATERIAL AS THE PIPE AND FITTINGS MATERIAL AS THE PIPE AND FITTINGS MATERIAL AS THE PIPE AND FITTINGS AS THE PIPE AND FITTINGS AS THE PIPE AND FITTINGS THE PIPE AND FITTINGS THE PIPE AND FITTINGS PIPE AND FITTINGS PIPE AND FITTINGS AND FITTINGS AND FITTINGS FITTINGS FITTINGS OF THE SYSTEM IN WHICH THEY ARE INSTALLED. DIELECTRIC UNIONS: TO PREVENT THE SYSTEM IN WHICH THEY ARE INSTALLED. DIELECTRIC UNIONS: TO PREVENT THE SYSTEM IN WHICH THEY ARE INSTALLED. DIELECTRIC UNIONS: TO PREVENT SYSTEM IN WHICH THEY ARE INSTALLED. DIELECTRIC UNIONS: TO PREVENT SYSTEM IN WHICH THEY ARE INSTALLED. DIELECTRIC UNIONS: TO PREVENT IN WHICH THEY ARE INSTALLED. DIELECTRIC UNIONS: TO PREVENT IN WHICH THEY ARE INSTALLED. DIELECTRIC UNIONS: TO PREVENT WHICH THEY ARE INSTALLED. DIELECTRIC UNIONS: TO PREVENT WHICH THEY ARE INSTALLED. DIELECTRIC UNIONS: TO PREVENT THEY ARE INSTALLED. DIELECTRIC UNIONS: TO PREVENT THEY ARE INSTALLED. DIELECTRIC UNIONS: TO PREVENT ARE INSTALLED. DIELECTRIC UNIONS: TO PREVENT ARE INSTALLED. DIELECTRIC UNIONS: TO PREVENT INSTALLED. DIELECTRIC UNIONS: TO PREVENT INSTALLED. DIELECTRIC UNIONS: TO PREVENT DIELECTRIC UNIONS: TO PREVENT DIELECTRIC UNIONS: TO PREVENT UNIONS: TO PREVENT UNIONS: TO PREVENT TO PREVENT TO PREVENT TO PREVENT PREVENT PREVENT CORROSION CAUSED BY DISSIMILAR MATERIALS PROVIDE DIELECTRIC UNIONS EQUAL CAUSED BY DISSIMILAR MATERIALS PROVIDE DIELECTRIC UNIONS EQUAL CAUSED BY DISSIMILAR MATERIALS PROVIDE DIELECTRIC UNIONS EQUAL BY DISSIMILAR MATERIALS PROVIDE DIELECTRIC UNIONS EQUAL BY DISSIMILAR MATERIALS PROVIDE DIELECTRIC UNIONS EQUAL DISSIMILAR MATERIALS PROVIDE DIELECTRIC UNIONS EQUAL DISSIMILAR MATERIALS PROVIDE DIELECTRIC UNIONS EQUAL MATERIALS PROVIDE DIELECTRIC UNIONS EQUAL MATERIALS PROVIDE DIELECTRIC UNIONS EQUAL PROVIDE DIELECTRIC UNIONS EQUAL PROVIDE DIELECTRIC UNIONS EQUAL DIELECTRIC UNIONS EQUAL DIELECTRIC UNIONS EQUAL UNIONS EQUAL UNIONS EQUAL EQUAL EQUAL TO WATTS SERIES 3000, WITH MATERIALS TO MATCH PIPING SYSTEM. FLANGED WATTS SERIES 3000, WITH MATERIALS TO MATCH PIPING SYSTEM. FLANGED WATTS SERIES 3000, WITH MATERIALS TO MATCH PIPING SYSTEM. FLANGED SERIES 3000, WITH MATERIALS TO MATCH PIPING SYSTEM. FLANGED SERIES 3000, WITH MATERIALS TO MATCH PIPING SYSTEM. FLANGED 3000, WITH MATERIALS TO MATCH PIPING SYSTEM. FLANGED 3000, WITH MATERIALS TO MATCH PIPING SYSTEM. FLANGED WITH MATERIALS TO MATCH PIPING SYSTEM. FLANGED WITH MATERIALS TO MATCH PIPING SYSTEM. FLANGED MATERIALS TO MATCH PIPING SYSTEM. FLANGED MATERIALS TO MATCH PIPING SYSTEM. FLANGED TO MATCH PIPING SYSTEM. FLANGED TO MATCH PIPING SYSTEM. FLANGED MATCH PIPING SYSTEM. FLANGED MATCH PIPING SYSTEM. FLANGED PIPING SYSTEM. FLANGED PIPING SYSTEM. FLANGED SYSTEM. FLANGED SYSTEM. FLANGED FLANGED FLANGED FLANGED DIELECTRIC FITTINGS SHALL BE EQUAL TO WATTS SERIES 3100 WITH MATERIALS TO FITTINGS SHALL BE EQUAL TO WATTS SERIES 3100 WITH MATERIALS TO FITTINGS SHALL BE EQUAL TO WATTS SERIES 3100 WITH MATERIALS TO SHALL BE EQUAL TO WATTS SERIES 3100 WITH MATERIALS TO SHALL BE EQUAL TO WATTS SERIES 3100 WITH MATERIALS TO BE EQUAL TO WATTS SERIES 3100 WITH MATERIALS TO BE EQUAL TO WATTS SERIES 3100 WITH MATERIALS TO EQUAL TO WATTS SERIES 3100 WITH MATERIALS TO EQUAL TO WATTS SERIES 3100 WITH MATERIALS TO TO WATTS SERIES 3100 WITH MATERIALS TO TO WATTS SERIES 3100 WITH MATERIALS TO WATTS SERIES 3100 WITH MATERIALS TO WATTS SERIES 3100 WITH MATERIALS TO SERIES 3100 WITH MATERIALS TO SERIES 3100 WITH MATERIALS TO 3100 WITH MATERIALS TO 3100 WITH MATERIALS TO WITH MATERIALS TO WITH MATERIALS TO MATERIALS TO MATERIALS TO TO TO MATCH PIPING SYSTEM. VALVES: : SHALL BE LEAD-FREE AND MANUACTURED BY APOLLO, MILWAUKEE OR WATTS. BE LEAD-FREE AND MANUACTURED BY APOLLO, MILWAUKEE OR WATTS. BE LEAD-FREE AND MANUACTURED BY APOLLO, MILWAUKEE OR WATTS. LEAD-FREE AND MANUACTURED BY APOLLO, MILWAUKEE OR WATTS. LEAD-FREE AND MANUACTURED BY APOLLO, MILWAUKEE OR WATTS. AND MANUACTURED BY APOLLO, MILWAUKEE OR WATTS. AND MANUACTURED BY APOLLO, MILWAUKEE OR WATTS. MANUACTURED BY APOLLO, MILWAUKEE OR WATTS. MANUACTURED BY APOLLO, MILWAUKEE OR WATTS. BY APOLLO, MILWAUKEE OR WATTS. BY APOLLO, MILWAUKEE OR WATTS. APOLLO, MILWAUKEE OR WATTS. APOLLO, MILWAUKEE OR WATTS. MILWAUKEE OR WATTS. MILWAUKEE OR WATTS. OR WATTS. OR WATTS. WATTS. WATTS. VALVE TYPE AND NUMBERS NOTED HEREIN ESTABLISH STANDARD OF TYPE AND TYPE AND NUMBERS NOTED HEREIN ESTABLISH STANDARD OF TYPE AND TYPE AND NUMBERS NOTED HEREIN ESTABLISH STANDARD OF TYPE AND AND NUMBERS NOTED HEREIN ESTABLISH STANDARD OF TYPE AND AND NUMBERS NOTED HEREIN ESTABLISH STANDARD OF TYPE AND NUMBERS NOTED HEREIN ESTABLISH STANDARD OF TYPE AND NUMBERS NOTED HEREIN ESTABLISH STANDARD OF TYPE AND NOTED HEREIN ESTABLISH STANDARD OF TYPE AND NOTED HEREIN ESTABLISH STANDARD OF TYPE AND HEREIN ESTABLISH STANDARD OF TYPE AND HEREIN ESTABLISH STANDARD OF TYPE AND ESTABLISH STANDARD OF TYPE AND ESTABLISH STANDARD OF TYPE AND STANDARD OF TYPE AND STANDARD OF TYPE AND OF TYPE AND OF TYPE AND TYPE AND TYPE AND AND AND QUALITY. VALVES SHALL HAVE SCREWED ENDS FOR SCREWED PIPING AND SOLDER VALVES SHALL HAVE SCREWED ENDS FOR SCREWED PIPING AND SOLDER VALVES SHALL HAVE SCREWED ENDS FOR SCREWED PIPING AND SOLDER VALVES SHALL HAVE SCREWED ENDS FOR SCREWED PIPING AND SOLDER SHALL HAVE SCREWED ENDS FOR SCREWED PIPING AND SOLDER SHALL HAVE SCREWED ENDS FOR SCREWED PIPING AND SOLDER HAVE SCREWED ENDS FOR SCREWED PIPING AND SOLDER HAVE SCREWED ENDS FOR SCREWED PIPING AND SOLDER SCREWED ENDS FOR SCREWED PIPING AND SOLDER SCREWED ENDS FOR SCREWED PIPING AND SOLDER ENDS FOR SCREWED PIPING AND SOLDER ENDS FOR SCREWED PIPING AND SOLDER FOR SCREWED PIPING AND SOLDER FOR SCREWED PIPING AND SOLDER SCREWED PIPING AND SOLDER SCREWED PIPING AND SOLDER PIPING AND SOLDER PIPING AND SOLDER AND SOLDER AND SOLDER SOLDER SOLDER JOINT ENDS FOR COPPER TUBE PIPING. PROVIDE VALVES FOR SERVICES LISTED ENDS FOR COPPER TUBE PIPING. PROVIDE VALVES FOR SERVICES LISTED ENDS FOR COPPER TUBE PIPING. PROVIDE VALVES FOR SERVICES LISTED FOR COPPER TUBE PIPING. PROVIDE VALVES FOR SERVICES LISTED FOR COPPER TUBE PIPING. PROVIDE VALVES FOR SERVICES LISTED COPPER TUBE PIPING. PROVIDE VALVES FOR SERVICES LISTED COPPER TUBE PIPING. PROVIDE VALVES FOR SERVICES LISTED TUBE PIPING. PROVIDE VALVES FOR SERVICES LISTED TUBE PIPING. PROVIDE VALVES FOR SERVICES LISTED PIPING. PROVIDE VALVES FOR SERVICES LISTED PIPING. PROVIDE VALVES FOR SERVICES LISTED PROVIDE VALVES FOR SERVICES LISTED PROVIDE VALVES FOR SERVICES LISTED PROVIDE VALVES FOR SERVICES LISTED PROVIDE VALVES FOR SERVICES LISTED VALVES FOR SERVICES LISTED VALVES FOR SERVICES LISTED FOR SERVICES LISTED FOR SERVICES LISTED SERVICES LISTED SERVICES LISTED LISTED LISTED BELOW AND OF THE FOLLOWING TYPES. BALL VALVES SHALL BE EQUAL TO WATTS NO. LF-B-6000, BRONZE BODY, 600 LB. VALVES SHALL BE EQUAL TO WATTS NO. LF-B-6000, BRONZE BODY, 600 LB. VALVES SHALL BE EQUAL TO WATTS NO. LF-B-6000, BRONZE BODY, 600 LB. SHALL BE EQUAL TO WATTS NO. LF-B-6000, BRONZE BODY, 600 LB. SHALL BE EQUAL TO WATTS NO. LF-B-6000, BRONZE BODY, 600 LB. BE EQUAL TO WATTS NO. LF-B-6000, BRONZE BODY, 600 LB. BE EQUAL TO WATTS NO. LF-B-6000, BRONZE BODY, 600 LB. EQUAL TO WATTS NO. LF-B-6000, BRONZE BODY, 600 LB. EQUAL TO WATTS NO. LF-B-6000, BRONZE BODY, 600 LB. TO WATTS NO. LF-B-6000, BRONZE BODY, 600 LB. TO WATTS NO. LF-B-6000, BRONZE BODY, 600 LB. WATTS NO. LF-B-6000, BRONZE BODY, 600 LB. WATTS NO. LF-B-6000, BRONZE BODY, 600 LB. NO. LF-B-6000, BRONZE BODY, 600 LB. NO. LF-B-6000, BRONZE BODY, 600 LB. LF-B-6000, BRONZE BODY, 600 LB. LF-B-6000, BRONZE BODY, 600 LB. BRONZE BODY, 600 LB. BRONZE BODY, 600 LB. BODY, 600 LB. BODY, 600 LB. 600 LB. 600 LB. LB. LB. W.O.G., STAINLESS STEEL BALL AND STEM, EXTENDED HANDLE TO ACCOMMODATE STAINLESS STEEL BALL AND STEM, EXTENDED HANDLE TO ACCOMMODATE STAINLESS STEEL BALL AND STEM, EXTENDED HANDLE TO ACCOMMODATE STEEL BALL AND STEM, EXTENDED HANDLE TO ACCOMMODATE STEEL BALL AND STEM, EXTENDED HANDLE TO ACCOMMODATE BALL AND STEM, EXTENDED HANDLE TO ACCOMMODATE BALL AND STEM, EXTENDED HANDLE TO ACCOMMODATE AND STEM, EXTENDED HANDLE TO ACCOMMODATE AND STEM, EXTENDED HANDLE TO ACCOMMODATE STEM, EXTENDED HANDLE TO ACCOMMODATE STEM, EXTENDED HANDLE TO ACCOMMODATE EXTENDED HANDLE TO ACCOMMODATE EXTENDED HANDLE TO ACCOMMODATE HANDLE TO ACCOMMODATE HANDLE TO ACCOMMODATE TO ACCOMMODATE TO ACCOMMODATE ACCOMMODATE ACCOMMODATE INSULATION THICKNESS, PTFE SEAT AND SEALS, SCREWED ENDS OR LF-B-6001 THICKNESS, PTFE SEAT AND SEALS, SCREWED ENDS OR LF-B-6001 THICKNESS, PTFE SEAT AND SEALS, SCREWED ENDS OR LF-B-6001 PTFE SEAT AND SEALS, SCREWED ENDS OR LF-B-6001 PTFE SEAT AND SEALS, SCREWED ENDS OR LF-B-6001 SEAT AND SEALS, SCREWED ENDS OR LF-B-6001 SEAT AND SEALS, SCREWED ENDS OR LF-B-6001 AND SEALS, SCREWED ENDS OR LF-B-6001 AND SEALS, SCREWED ENDS OR LF-B-6001 SEALS, SCREWED ENDS OR LF-B-6001 SEALS, SCREWED ENDS OR LF-B-6001 SCREWED ENDS OR LF-B-6001 SCREWED ENDS OR LF-B-6001 ENDS OR LF-B-6001 ENDS OR LF-B-6001 OR LF-B-6001 OR LF-B-6001 LF-B-6001 LF-B-6001 SWEAT ENDS, VIRGIN PTFE SEATS AND SEALS. CHECK VALVES: WATTS SERIES LF-CVS, SOLDER ENDS, SERIES CV SCREWED ENDS, VALVES: WATTS SERIES LF-CVS, SOLDER ENDS, SERIES CV SCREWED ENDS, VALVES: WATTS SERIES LF-CVS, SOLDER ENDS, SERIES CV SCREWED ENDS, WATTS SERIES LF-CVS, SOLDER ENDS, SERIES CV SCREWED ENDS, WATTS SERIES LF-CVS, SOLDER ENDS, SERIES CV SCREWED ENDS, WATTS SERIES LF-CVS, SOLDER ENDS, SERIES CV SCREWED ENDS, SERIES LF-CVS, SOLDER ENDS, SERIES CV SCREWED ENDS, SERIES LF-CVS, SOLDER ENDS, SERIES CV SCREWED ENDS, LF-CVS, SOLDER ENDS, SERIES CV SCREWED ENDS, LF-CVS, SOLDER ENDS, SERIES CV SCREWED ENDS, SOLDER ENDS, SERIES CV SCREWED ENDS, SOLDER ENDS, SERIES CV SCREWED ENDS, ENDS, SERIES CV SCREWED ENDS, ENDS, SERIES CV SCREWED ENDS, SERIES CV SCREWED ENDS, SERIES CV SCREWED ENDS, CV SCREWED ENDS, CV SCREWED ENDS, SCREWED ENDS, SCREWED ENDS, ENDS, ENDS, BRONZE BODY, 200 LB. W.O.G. DRAIN VALVES: WATTS NO. LF-B-6000, BRONZE BODY, STAINLESS STEEL BALL VALVES: WATTS NO. LF-B-6000, BRONZE BODY, STAINLESS STEEL BALL VALVES: WATTS NO. LF-B-6000, BRONZE BODY, STAINLESS STEEL BALL WATTS NO. LF-B-6000, BRONZE BODY, STAINLESS STEEL BALL WATTS NO. LF-B-6000, BRONZE BODY, STAINLESS STEEL BALL WATTS NO. LF-B-6000, BRONZE BODY, STAINLESS STEEL BALL NO. LF-B-6000, BRONZE BODY, STAINLESS STEEL BALL NO. LF-B-6000, BRONZE BODY, STAINLESS STEEL BALL LF-B-6000, BRONZE BODY, STAINLESS STEEL BALL LF-B-6000, BRONZE BODY, STAINLESS STEEL BALL BRONZE BODY, STAINLESS STEEL BALL BRONZE BODY, STAINLESS STEEL BALL BODY, STAINLESS STEEL BALL BODY, STAINLESS STEEL BALL STAINLESS STEEL BALL STAINLESS STEEL BALL STEEL BALL STEEL BALL BALL BALL AND STEM, SCREWED ENDS, NO. LF-B-6001 SWEAT ENDS. PROVIDE CAP AND STEM, SCREWED ENDS, NO. LF-B-6001 SWEAT ENDS. PROVIDE CAP AND STEM, SCREWED ENDS, NO. LF-B-6001 SWEAT ENDS. PROVIDE CAP AND SCREWED ENDS, NO. LF-B-6001 SWEAT ENDS. PROVIDE CAP AND SCREWED ENDS, NO. LF-B-6001 SWEAT ENDS. PROVIDE CAP AND ENDS, NO. LF-B-6001 SWEAT ENDS. PROVIDE CAP AND ENDS, NO. LF-B-6001 SWEAT ENDS. PROVIDE CAP AND NO. LF-B-6001 SWEAT ENDS. PROVIDE CAP AND NO. LF-B-6001 SWEAT ENDS. PROVIDE CAP AND LF-B-6001 SWEAT ENDS. PROVIDE CAP AND LF-B-6001 SWEAT ENDS. PROVIDE CAP AND SWEAT ENDS. PROVIDE CAP AND SWEAT ENDS. PROVIDE CAP AND ENDS. PROVIDE CAP AND ENDS. PROVIDE CAP AND PROVIDE CAP AND PROVIDE CAP AND PROVIDE CAP AND CAP AND CAP AND AND AND CHAIN, WITH 1/2" I.P.S. TO 3/4" HOSE. CLEANOUTS: FLOOR CLEANOUTS SHALL BE ZURN 1400 SERIES LEVEL-TROL SUPREME CLEANOUTS CLEANOUTS SHALL BE ZURN 1400 SERIES LEVEL-TROL SUPREME CLEANOUTS CLEANOUTS SHALL BE ZURN 1400 SERIES LEVEL-TROL SUPREME CLEANOUTS SHALL BE ZURN 1400 SERIES LEVEL-TROL SUPREME CLEANOUTS SHALL BE ZURN 1400 SERIES LEVEL-TROL SUPREME CLEANOUTS BE ZURN 1400 SERIES LEVEL-TROL SUPREME CLEANOUTS BE ZURN 1400 SERIES LEVEL-TROL SUPREME CLEANOUTS ZURN 1400 SERIES LEVEL-TROL SUPREME CLEANOUTS ZURN 1400 SERIES LEVEL-TROL SUPREME CLEANOUTS 1400 SERIES LEVEL-TROL SUPREME CLEANOUTS 1400 SERIES LEVEL-TROL SUPREME CLEANOUTS SERIES LEVEL-TROL SUPREME CLEANOUTS SERIES LEVEL-TROL SUPREME CLEANOUTS LEVEL-TROL SUPREME CLEANOUTS LEVEL-TROL SUPREME CLEANOUTS SUPREME CLEANOUTS SUPREME CLEANOUTS CLEANOUTS CLEANOUTS WITH POLISHED BRONZE TOP. CLEANOUTS SHALL BE SET FLUSH AND LEVEL WITH POLISHED BRONZE TOP. CLEANOUTS SHALL BE SET FLUSH AND LEVEL WITH POLISHED BRONZE TOP. CLEANOUTS SHALL BE SET FLUSH AND LEVEL WITH BRONZE TOP. CLEANOUTS SHALL BE SET FLUSH AND LEVEL WITH BRONZE TOP. CLEANOUTS SHALL BE SET FLUSH AND LEVEL WITH TOP. CLEANOUTS SHALL BE SET FLUSH AND LEVEL WITH TOP. CLEANOUTS SHALL BE SET FLUSH AND LEVEL WITH CLEANOUTS SHALL BE SET FLUSH AND LEVEL WITH CLEANOUTS SHALL BE SET FLUSH AND LEVEL WITH CLEANOUTS SHALL BE SET FLUSH AND LEVEL WITH SHALL BE SET FLUSH AND LEVEL WITH SHALL BE SET FLUSH AND LEVEL WITH BE SET FLUSH AND LEVEL WITH BE SET FLUSH AND LEVEL WITH SET FLUSH AND LEVEL WITH SET FLUSH AND LEVEL WITH FLUSH AND LEVEL WITH FLUSH AND LEVEL WITH AND LEVEL WITH AND LEVEL WITH LEVEL WITH LEVEL WITH WITH WITH TOP OF FINISHED FLOOR SURFACE. PROVIDE ANCHOR FLANGES AS REQUIRED FOR OF FINISHED FLOOR SURFACE. PROVIDE ANCHOR FLANGES AS REQUIRED FOR OF FINISHED FLOOR SURFACE. PROVIDE ANCHOR FLANGES AS REQUIRED FOR FINISHED FLOOR SURFACE. PROVIDE ANCHOR FLANGES AS REQUIRED FOR FINISHED FLOOR SURFACE. PROVIDE ANCHOR FLANGES AS REQUIRED FOR FLOOR SURFACE. PROVIDE ANCHOR FLANGES AS REQUIRED FOR FLOOR SURFACE. PROVIDE ANCHOR FLANGES AS REQUIRED FOR SURFACE. PROVIDE ANCHOR FLANGES AS REQUIRED FOR SURFACE. PROVIDE ANCHOR FLANGES AS REQUIRED FOR PROVIDE ANCHOR FLANGES AS REQUIRED FOR PROVIDE ANCHOR FLANGES AS REQUIRED FOR PROVIDE ANCHOR FLANGES AS REQUIRED FOR ANCHOR FLANGES AS REQUIRED FOR ANCHOR FLANGES AS REQUIRED FOR FLANGES AS REQUIRED FOR FLANGES AS REQUIRED FOR AS REQUIRED FOR AS REQUIRED FOR REQUIRED FOR REQUIRED FOR FOR FOR MOUNTING IN PRE-CAST CONCRETE SLABS. WALL CLEANOUTS SHALL BE BRASS, RECESSED HEAD PLUGS WITH ZURN ZN-1443 CLEANOUTS SHALL BE BRASS, RECESSED HEAD PLUGS WITH ZURN ZN-1443 CLEANOUTS SHALL BE BRASS, RECESSED HEAD PLUGS WITH ZURN ZN-1443 SHALL BE BRASS, RECESSED HEAD PLUGS WITH ZURN ZN-1443 SHALL BE BRASS, RECESSED HEAD PLUGS WITH ZURN ZN-1443 BE BRASS, RECESSED HEAD PLUGS WITH ZURN ZN-1443 BE BRASS, RECESSED HEAD PLUGS WITH ZURN ZN-1443 BRASS, RECESSED HEAD PLUGS WITH ZURN ZN-1443 BRASS, RECESSED HEAD PLUGS WITH ZURN ZN-1443 RECESSED HEAD PLUGS WITH ZURN ZN-1443 RECESSED HEAD PLUGS WITH ZURN ZN-1443 HEAD PLUGS WITH ZURN ZN-1443 HEAD PLUGS WITH ZURN ZN-1443 PLUGS WITH ZURN ZN-1443 PLUGS WITH ZURN ZN-1443 WITH ZURN ZN-1443 WITH ZURN ZN-1443 ZURN ZN-1443 ZURN ZN-1443 ZN-1443 ZN-1443 ACCESS FRAME AND COVER. PLUMBING FIXTURES: GENERAL REQUIREMENTS: AMERICAN STANDARD PLATE NUMBERS TO ESTABLISH REQUIREMENTS: AMERICAN STANDARD PLATE NUMBERS TO ESTABLISH REQUIREMENTS: AMERICAN STANDARD PLATE NUMBERS TO ESTABLISH AMERICAN STANDARD PLATE NUMBERS TO ESTABLISH AMERICAN STANDARD PLATE NUMBERS TO ESTABLISH AMERICAN STANDARD PLATE NUMBERS TO ESTABLISH STANDARD PLATE NUMBERS TO ESTABLISH STANDARD PLATE NUMBERS TO ESTABLISH PLATE NUMBERS TO ESTABLISH PLATE NUMBERS TO ESTABLISH NUMBERS TO ESTABLISH NUMBERS TO ESTABLISH TO ESTABLISH TO ESTABLISH ESTABLISH ESTABLISH TYPE AND QUALITY OF MATERIALS. ANGLE STOPS, STRAIGHT STOPS, STOPS AND QUALITY OF MATERIALS. ANGLE STOPS, STRAIGHT STOPS, STOPS AND QUALITY OF MATERIALS. ANGLE STOPS, STRAIGHT STOPS, STOPS QUALITY OF MATERIALS. ANGLE STOPS, STRAIGHT STOPS, STOPS QUALITY OF MATERIALS. ANGLE STOPS, STRAIGHT STOPS, STOPS OF MATERIALS. ANGLE STOPS, STRAIGHT STOPS, STOPS OF MATERIALS. ANGLE STOPS, STRAIGHT STOPS, STOPS MATERIALS. ANGLE STOPS, STRAIGHT STOPS, STOPS MATERIALS. ANGLE STOPS, STRAIGHT STOPS, STOPS ANGLE STOPS, STRAIGHT STOPS, STOPS ANGLE STOPS, STRAIGHT STOPS, STOPS ANGLE STOPS, STRAIGHT STOPS, STOPS STOPS, STRAIGHT STOPS, STOPS STOPS, STRAIGHT STOPS, STOPS STRAIGHT STOPS, STOPS STRAIGHT STOPS, STOPS STOPS, STOPS STOPS, STOPS STOPS STOPS INTEGRAL WITH THE FAUCETS, OR CONCEALED TYPE OF LOCK SHIELD, WHEEL HANDLE WITH THE FAUCETS, OR CONCEALED TYPE OF LOCK SHIELD, WHEEL HANDLE WITH THE FAUCETS, OR CONCEALED TYPE OF LOCK SHIELD, WHEEL HANDLE THE FAUCETS, OR CONCEALED TYPE OF LOCK SHIELD, WHEEL HANDLE THE FAUCETS, OR CONCEALED TYPE OF LOCK SHIELD, WHEEL HANDLE FAUCETS, OR CONCEALED TYPE OF LOCK SHIELD, WHEEL HANDLE FAUCETS, OR CONCEALED TYPE OF LOCK SHIELD, WHEEL HANDLE OR CONCEALED TYPE OF LOCK SHIELD, WHEEL HANDLE OR CONCEALED TYPE OF LOCK SHIELD, WHEEL HANDLE CONCEALED TYPE OF LOCK SHIELD, WHEEL HANDLE CONCEALED TYPE OF LOCK SHIELD, WHEEL HANDLE TYPE OF LOCK SHIELD, WHEEL HANDLE TYPE OF LOCK SHIELD, WHEEL HANDLE OF LOCK SHIELD, WHEEL HANDLE OF LOCK SHIELD, WHEEL HANDLE LOCK SHIELD, WHEEL HANDLE LOCK SHIELD, WHEEL HANDLE SHIELD, WHEEL HANDLE SHIELD, WHEEL HANDLE WHEEL HANDLE WHEEL HANDLE HANDLE HANDLE STOPS FOR SUPPLIES SHALL BE FURNISHED AND INSTALLED WITH FIXTURES AS FOR SUPPLIES SHALL BE FURNISHED AND INSTALLED WITH FIXTURES AS FOR SUPPLIES SHALL BE FURNISHED AND INSTALLED WITH FIXTURES AS SUPPLIES SHALL BE FURNISHED AND INSTALLED WITH FIXTURES AS SUPPLIES SHALL BE FURNISHED AND INSTALLED WITH FIXTURES AS SHALL BE FURNISHED AND INSTALLED WITH FIXTURES AS SHALL BE FURNISHED AND INSTALLED WITH FIXTURES AS BE FURNISHED AND INSTALLED WITH FIXTURES AS BE FURNISHED AND INSTALLED WITH FIXTURES AS FURNISHED AND INSTALLED WITH FIXTURES AS FURNISHED AND INSTALLED WITH FIXTURES AS AND INSTALLED WITH FIXTURES AS AND INSTALLED WITH FIXTURES AS INSTALLED WITH FIXTURES AS INSTALLED WITH FIXTURES AS WITH FIXTURES AS WITH FIXTURES AS FIXTURES AS FIXTURES AS AS AS SPECIFIED BELOW. EXPOSED TRAPS AND SUPPLY PIPES FOR ALL FIXTURES AND BELOW. EXPOSED TRAPS AND SUPPLY PIPES FOR ALL FIXTURES AND BELOW. EXPOSED TRAPS AND SUPPLY PIPES FOR ALL FIXTURES AND EXPOSED TRAPS AND SUPPLY PIPES FOR ALL FIXTURES AND EXPOSED TRAPS AND SUPPLY PIPES FOR ALL FIXTURES AND EXPOSED TRAPS AND SUPPLY PIPES FOR ALL FIXTURES AND TRAPS AND SUPPLY PIPES FOR ALL FIXTURES AND TRAPS AND SUPPLY PIPES FOR ALL FIXTURES AND AND SUPPLY PIPES FOR ALL FIXTURES AND AND SUPPLY PIPES FOR ALL FIXTURES AND SUPPLY PIPES FOR ALL FIXTURES AND SUPPLY PIPES FOR ALL FIXTURES AND PIPES FOR ALL FIXTURES AND PIPES FOR ALL FIXTURES AND FOR ALL FIXTURES AND FOR ALL FIXTURES AND ALL FIXTURES AND ALL FIXTURES AND FIXTURES AND FIXTURES AND AND AND EQUIPMENT SHALL BE CHROME PLATED AND CONNECTED TO THE ROUGH PIPING SHALL BE CHROME PLATED AND CONNECTED TO THE ROUGH PIPING SHALL BE CHROME PLATED AND CONNECTED TO THE ROUGH PIPING BE CHROME PLATED AND CONNECTED TO THE ROUGH PIPING BE CHROME PLATED AND CONNECTED TO THE ROUGH PIPING CHROME PLATED AND CONNECTED TO THE ROUGH PIPING CHROME PLATED AND CONNECTED TO THE ROUGH PIPING PLATED AND CONNECTED TO THE ROUGH PIPING PLATED AND CONNECTED TO THE ROUGH PIPING AND CONNECTED TO THE ROUGH PIPING AND CONNECTED TO THE ROUGH PIPING CONNECTED TO THE ROUGH PIPING CONNECTED TO THE ROUGH PIPING TO THE ROUGH PIPING TO THE ROUGH PIPING THE ROUGH PIPING THE ROUGH PIPING ROUGH PIPING ROUGH PIPING PIPING PIPING SYSTEMS AT THE WALL. WALL ESCUTCHEONS SHALL BE CHROMIUM PLATED OR AT THE WALL. WALL ESCUTCHEONS SHALL BE CHROMIUM PLATED OR AT THE WALL. WALL ESCUTCHEONS SHALL BE CHROMIUM PLATED OR THE WALL. WALL ESCUTCHEONS SHALL BE CHROMIUM PLATED OR THE WALL. WALL ESCUTCHEONS SHALL BE CHROMIUM PLATED OR WALL. WALL ESCUTCHEONS SHALL BE CHROMIUM PLATED OR WALL. WALL ESCUTCHEONS SHALL BE CHROMIUM PLATED OR WALL ESCUTCHEONS SHALL BE CHROMIUM PLATED OR WALL ESCUTCHEONS SHALL BE CHROMIUM PLATED OR WALL ESCUTCHEONS SHALL BE CHROMIUM PLATED OR ESCUTCHEONS SHALL BE CHROMIUM PLATED OR ESCUTCHEONS SHALL BE CHROMIUM PLATED OR SHALL BE CHROMIUM PLATED OR SHALL BE CHROMIUM PLATED OR BE CHROMIUM PLATED OR BE CHROMIUM PLATED OR CHROMIUM PLATED OR CHROMIUM PLATED OR PLATED OR PLATED OR OR OR NICKEL PLATED BRASS WITH POLISHED, BRIGHT SURFACES. FIXTURES SHALL BE PLATED BRASS WITH POLISHED, BRIGHT SURFACES. FIXTURES SHALL BE PLATED BRASS WITH POLISHED, BRIGHT SURFACES. FIXTURES SHALL BE BRASS WITH POLISHED, BRIGHT SURFACES. FIXTURES SHALL BE BRASS WITH POLISHED, BRIGHT SURFACES. FIXTURES SHALL BE WITH POLISHED, BRIGHT SURFACES. FIXTURES SHALL BE WITH POLISHED, BRIGHT SURFACES. FIXTURES SHALL BE POLISHED, BRIGHT SURFACES. FIXTURES SHALL BE POLISHED, BRIGHT SURFACES. FIXTURES SHALL BE BRIGHT SURFACES. FIXTURES SHALL BE BRIGHT SURFACES. FIXTURES SHALL BE SURFACES. FIXTURES SHALL BE SURFACES. FIXTURES SHALL BE FIXTURES SHALL BE FIXTURES SHALL BE FIXTURES SHALL BE SHALL BE SHALL BE BE BE EQUAL TO THE AMERICAN STANDARD MODELS SPECIFIED BELOW. P-1 ACCESSIBLE WATERCLOSET: AMERICAN STANDARD “CADET 3, FLOWISE, RIGHT ACCESSIBLE WATERCLOSET: AMERICAN STANDARD “CADET 3, FLOWISE, RIGHT ACCESSIBLE WATERCLOSET: AMERICAN STANDARD “CADET 3, FLOWISE, RIGHT WATERCLOSET: AMERICAN STANDARD “CADET 3, FLOWISE, RIGHT WATERCLOSET: AMERICAN STANDARD “CADET 3, FLOWISE, RIGHT : AMERICAN STANDARD “CADET 3, FLOWISE, RIGHT AMERICAN STANDARD “CADET 3, FLOWISE, RIGHT AMERICAN STANDARD “CADET 3, FLOWISE, RIGHT STANDARD “CADET 3, FLOWISE, RIGHT STANDARD “CADET 3, FLOWISE, RIGHT “CADET 3, FLOWISE, RIGHT CADET 3, FLOWISE, RIGHT 3, FLOWISE, RIGHT 3, FLOWISE, RIGHT FLOWISE, RIGHT FLOWISE, RIGHT RIGHT RIGHT HEIGHT 16 1/2” HIGH RIM, ELONGATED BOW, 1.28 GPF. SIPHON JET, VITRUOS CHINA, 16 1/2” HIGH RIM, ELONGATED BOW, 1.28 GPF. SIPHON JET, VITRUOS CHINA, 16 1/2” HIGH RIM, ELONGATED BOW, 1.28 GPF. SIPHON JET, VITRUOS CHINA, 1/2” HIGH RIM, ELONGATED BOW, 1.28 GPF. SIPHON JET, VITRUOS CHINA, 1/2” HIGH RIM, ELONGATED BOW, 1.28 GPF. SIPHON JET, VITRUOS CHINA, HIGH RIM, ELONGATED BOW, 1.28 GPF. SIPHON JET, VITRUOS CHINA, HIGH RIM, ELONGATED BOW, 1.28 GPF. SIPHON JET, VITRUOS CHINA, RIM, ELONGATED BOW, 1.28 GPF. SIPHON JET, VITRUOS CHINA, RIM, ELONGATED BOW, 1.28 GPF. SIPHON JET, VITRUOS CHINA, ELONGATED BOW, 1.28 GPF. SIPHON JET, VITRUOS CHINA, ELONGATED BOW, 1.28 GPF. SIPHON JET, VITRUOS CHINA, BOW, 1.28 GPF. SIPHON JET, VITRUOS CHINA, BOW, 1.28 GPF. SIPHON JET, VITRUOS CHINA, 1.28 GPF. SIPHON JET, VITRUOS CHINA, 1.28 GPF. SIPHON JET, VITRUOS CHINA, GPF. SIPHON JET, VITRUOS CHINA, GPF. SIPHON JET, VITRUOS CHINA, SIPHON JET, VITRUOS CHINA, SIPHON JET, VITRUOS CHINA, JET, VITRUOS CHINA, JET, VITRUOS CHINA, VITRUOS CHINA, VITRUOS CHINA, CHINA, CHINA, MODEL 2835.128. MOUNT PER ADA REQUIREMENTS. PROVIDE BEMIS MODEL 1955CT 2835.128. MOUNT PER ADA REQUIREMENTS. PROVIDE BEMIS MODEL 1955CT 2835.128. MOUNT PER ADA REQUIREMENTS. PROVIDE BEMIS MODEL 1955CT MOUNT PER ADA REQUIREMENTS. PROVIDE BEMIS MODEL 1955CT MOUNT PER ADA REQUIREMENTS. PROVIDE BEMIS MODEL 1955CT PER ADA REQUIREMENTS. PROVIDE BEMIS MODEL 1955CT PER ADA REQUIREMENTS. PROVIDE BEMIS MODEL 1955CT ADA REQUIREMENTS. PROVIDE BEMIS MODEL 1955CT ADA REQUIREMENTS. PROVIDE BEMIS MODEL 1955CT REQUIREMENTS. PROVIDE BEMIS MODEL 1955CT REQUIREMENTS. PROVIDE BEMIS MODEL 1955CT PROVIDE BEMIS MODEL 1955CT PROVIDE BEMIS MODEL 1955CT BEMIS MODEL 1955CT BEMIS MODEL 1955CT MODEL 1955CT MODEL 1955CT 1955CT 1955CT OPEN FRONT SEAT WITH COVER. PROVIDE CHROME PLATED WALL SUPPLY WITH FRONT SEAT WITH COVER. PROVIDE CHROME PLATED WALL SUPPLY WITH FRONT SEAT WITH COVER. PROVIDE CHROME PLATED WALL SUPPLY WITH SEAT WITH COVER. PROVIDE CHROME PLATED WALL SUPPLY WITH SEAT WITH COVER. PROVIDE CHROME PLATED WALL SUPPLY WITH WITH COVER. PROVIDE CHROME PLATED WALL SUPPLY WITH WITH COVER. PROVIDE CHROME PLATED WALL SUPPLY WITH COVER. PROVIDE CHROME PLATED WALL SUPPLY WITH COVER. PROVIDE CHROME PLATED WALL SUPPLY WITH PROVIDE CHROME PLATED WALL SUPPLY WITH PROVIDE CHROME PLATED WALL SUPPLY WITH CHROME PLATED WALL SUPPLY WITH CHROME PLATED WALL SUPPLY WITH PLATED WALL SUPPLY WITH PLATED WALL SUPPLY WITH WALL SUPPLY WITH WALL SUPPLY WITH SUPPLY WITH SUPPLY WITH WITH WITH WHEEL HANDLED STOP AND LEAD FREE BRADED STAINLESS-STEEL WATER SUPPLY HANDLED STOP AND LEAD FREE BRADED STAINLESS-STEEL WATER SUPPLY HANDLED STOP AND LEAD FREE BRADED STAINLESS-STEEL WATER SUPPLY STOP AND LEAD FREE BRADED STAINLESS-STEEL WATER SUPPLY STOP AND LEAD FREE BRADED STAINLESS-STEEL WATER SUPPLY AND LEAD FREE BRADED STAINLESS-STEEL WATER SUPPLY AND LEAD FREE BRADED STAINLESS-STEEL WATER SUPPLY LEAD FREE BRADED STAINLESS-STEEL WATER SUPPLY LEAD FREE BRADED STAINLESS-STEEL WATER SUPPLY FREE BRADED STAINLESS-STEEL WATER SUPPLY FREE BRADED STAINLESS-STEEL WATER SUPPLY BRADED STAINLESS-STEEL WATER SUPPLY BRADED STAINLESS-STEEL WATER SUPPLY STAINLESS-STEEL WATER SUPPLY STAINLESS-STEEL WATER SUPPLY WATER SUPPLY WATER SUPPLY SUPPLY SUPPLY CONNECTORS. LOCATE FLUSH HANDLE ON ACCESSIBLE SIDE OF TANK. P-1A CHILDRENS WATERCLOSET: AMERICAN STANDARD “BABY DEVORO, FLOWISE”, CHILDRENS WATERCLOSET: AMERICAN STANDARD “BABY DEVORO, FLOWISE”, CHILDRENS WATERCLOSET: AMERICAN STANDARD “BABY DEVORO, FLOWISE”, WATERCLOSET: AMERICAN STANDARD “BABY DEVORO, FLOWISE”, WATERCLOSET: AMERICAN STANDARD “BABY DEVORO, FLOWISE”, : AMERICAN STANDARD “BABY DEVORO, FLOWISE”, AMERICAN STANDARD “BABY DEVORO, FLOWISE”, AMERICAN STANDARD “BABY DEVORO, FLOWISE”, STANDARD “BABY DEVORO, FLOWISE”, STANDARD “BABY DEVORO, FLOWISE”, “BABY DEVORO, FLOWISE”, BABY DEVORO, FLOWISE”, DEVORO, FLOWISE”, DEVORO, FLOWISE”, FLOWISE”, FLOWISE”, , ROUND FRONT FLUSH TANK TOILET, 1.28 GPF, SIPHON JET, VITREOUS CHINA, MODEL FRONT FLUSH TANK TOILET, 1.28 GPF, SIPHON JET, VITREOUS CHINA, MODEL FRONT FLUSH TANK TOILET, 1.28 GPF, SIPHON JET, VITREOUS CHINA, MODEL FLUSH TANK TOILET, 1.28 GPF, SIPHON JET, VITREOUS CHINA, MODEL FLUSH TANK TOILET, 1.28 GPF, SIPHON JET, VITREOUS CHINA, MODEL TANK TOILET, 1.28 GPF, SIPHON JET, VITREOUS CHINA, MODEL TANK TOILET, 1.28 GPF, SIPHON JET, VITREOUS CHINA, MODEL TOILET, 1.28 GPF, SIPHON JET, VITREOUS CHINA, MODEL TOILET, 1.28 GPF, SIPHON JET, VITREOUS CHINA, MODEL 1.28 GPF, SIPHON JET, VITREOUS CHINA, MODEL 1.28 GPF, SIPHON JET, VITREOUS CHINA, MODEL GPF, SIPHON JET, VITREOUS CHINA, MODEL GPF, SIPHON JET, VITREOUS CHINA, MODEL SIPHON JET, VITREOUS CHINA, MODEL SIPHON JET, VITREOUS CHINA, MODEL JET, VITREOUS CHINA, MODEL JET, VITREOUS CHINA, MODEL VITREOUS CHINA, MODEL VITREOUS CHINA, MODEL CHINA, MODEL CHINA, MODEL MODEL MODEL 2315.228.020 PROVIDE OPEN FRONT SEAT LESS COVER. PROVIDE CHROME PLATED PROVIDE OPEN FRONT SEAT LESS COVER. PROVIDE CHROME PLATED PROVIDE OPEN FRONT SEAT LESS COVER. PROVIDE CHROME PLATED OPEN FRONT SEAT LESS COVER. PROVIDE CHROME PLATED OPEN FRONT SEAT LESS COVER. PROVIDE CHROME PLATED FRONT SEAT LESS COVER. PROVIDE CHROME PLATED FRONT SEAT LESS COVER. PROVIDE CHROME PLATED SEAT LESS COVER. PROVIDE CHROME PLATED SEAT LESS COVER. PROVIDE CHROME PLATED LESS COVER. PROVIDE CHROME PLATED LESS COVER. PROVIDE CHROME PLATED COVER. PROVIDE CHROME PLATED COVER. PROVIDE CHROME PLATED PROVIDE CHROME PLATED PROVIDE CHROME PLATED CHROME PLATED CHROME PLATED PLATED PLATED WALL SUPPLY WITH WHEEL HANDLED STOP AND LEAD FREE BRAIDED SUPPLY WITH WHEEL HANDLED STOP AND LEAD FREE BRAIDED SUPPLY WITH WHEEL HANDLED STOP AND LEAD FREE BRAIDED WITH WHEEL HANDLED STOP AND LEAD FREE BRAIDED WITH WHEEL HANDLED STOP AND LEAD FREE BRAIDED WHEEL HANDLED STOP AND LEAD FREE BRAIDED WHEEL HANDLED STOP AND LEAD FREE BRAIDED HANDLED STOP AND LEAD FREE BRAIDED HANDLED STOP AND LEAD FREE BRAIDED STOP AND LEAD FREE BRAIDED STOP AND LEAD FREE BRAIDED AND LEAD FREE BRAIDED AND LEAD FREE BRAIDED LEAD FREE BRAIDED LEAD FREE BRAIDED FREE BRAIDED FREE BRAIDED BRAIDED BRAIDED STAINLESS-STEEL WATER SUPPLY CONNECTORS. P-2 ACCESSIBLE WALL HUNG LAVATORY: AMERICAN STANDARD “LUCERNE”, MODEL : AMERICAN STANDARD “LUCERNE”, MODEL LUCERNE”, MODEL , MODEL 0355.012, WALL HUNG, VITREOUS CHINA WITH ZURN MODEL Z-1253, ADJUSTABLE CONCEALED ARM CARRIER. FAUCET TO BE SYMMONS MODEL S-20-0-1.5, SINGLE HANDLE, CHROME PLATED BRASS FAUCET, WITHOUT POP-UP WASTE ASSEMBLY, PROVIDE CHROME PLATED BRASS GRID DRAIN OFFSET ASSEMBLY. PROVIDE CHROME PLATED WALL SUPPLY WITH WHEEL HANDLED STOPS AND LEAD FREE BRAIDED STAINLESS STEEL WATER SUPPLY CONNECTORS. PROVIDE TRUEBRO “HANDI-LAV” HANDI-LAV” INSULATION KIT ON ALL EXPOSED PIPING. MOUNT PER ADA REQUIREMENTS UNITS. P-2A CHILDRENS WALL HUNG LAVATORY: WALL HUNG LAVATORY TO BE AMERICAN WALL HUNG LAVATORY TO BE AMERICAN STANDARD “LUCERNE” MODEL 0355.012, MOUNT AT 29” ABOVE FLOOR TO RIM FOR LUCERNE” MODEL 0355.012, MOUNT AT 29” ABOVE FLOOR TO RIM FOR MODEL 0355.012, MOUNT AT 29” ABOVE FLOOR TO RIM FOR ABOVE FLOOR TO RIM FOR CHILDREN. PROVIDE ALL NECESSARY TRIM. FAUCET TO BE SYMMONS MODEL S-20-0-1.5, SINGLE HANDLE, CHROME PLATED BRASS FAUCET, WITHOUT POP-UP WASTE ASSEMBLY, PROVIDE CHROME PLATED BRASS GRID DRAIN OFFSET ASSEMBLY. PROVIDE ZURN MODEL Z-1253 ADJUSTABLE CONCEALED ARM SUPPORTS. PROVIDE CHROME PLATED WALL SUPPLY WITH WHEEL HANDLED STOPS AND LEAD FREE BRAIDED STAINLESS-STEEL WATER SUPPLY CONNECTORS. P-3 CHILDRENS SINK: ELKAY MODEL LRAD191855, 19”X 18” X 5 1/2” DEEP, 18 : ELKAY MODEL LRAD191855, 19”X 18” X 5 1/2” DEEP, 18 X 18” X 5 1/2” DEEP, 18 X 5 1/2” DEEP, 18 DEEP, 18 GAUGE TYPE 304 SELF-RIM SINGLE BOWL KITCHEN SINK DRILLED FOR LISTED FAUCET. PROVIDE BASKET STRAINER WITH 1 1/2” TAILPIECE. FAUCET TO BE TAILPIECE. FAUCET TO BE SYMMONS MODEL S-23-1.5, CHROME SINGLE LEVER HANDLE TYPE WITH SWING SPOUT, 1.5 GPM AERATOR, LESS HAND SPRAY. PROVIDE CHROME PLATED WALL SUPPLIES WITH WHEEL HANDLED STOP. MOUNT AT 29” ABOVE FLOOR TO RIM FOR ABOVE FLOOR TO RIM FOR CHILDREN. P-4 KITCHEN SINK: ELKAY MODEL LR3322, 33”X 22” X 8 1/8” DEEP, 18 GAUGE : ELKAY MODEL LR3322, 33”X 22” X 8 1/8” DEEP, 18 GAUGE X 22” X 8 1/8” DEEP, 18 GAUGE X 8 1/8” DEEP, 18 GAUGE DEEP, 18 GAUGE TYPE 304 SELF-RIM DOUBLE BOWL KITCHEN SINK DRILLED FOR LISTED FAUCET. PROVIDE BASKET STRAINER WITH 1 1/2” TAILPIECE. FAUCET TO BE SYMMONS MODEL TAILPIECE. FAUCET TO BE SYMMONS MODEL S-23-2-1.5, CHROME SINGLE LEVER HANDLE TYPE WITH SWING SPOUT, 1.5 GPM AERATOR AND HAND SPRAY. PROVIDE CHROME PLATED WALL SUPPLIES WITH WHEEL HANDLED STOP. STERILIZATION: AFTER COMPLETION ALL NEW DOMESTIC WATER PIPING SYSTEM THE NEW SYSTEM COMPLETION ALL NEW DOMESTIC WATER PIPING SYSTEM THE NEW SYSTEM COMPLETION ALL NEW DOMESTIC WATER PIPING SYSTEM THE NEW SYSTEM ALL NEW DOMESTIC WATER PIPING SYSTEM THE NEW SYSTEM ALL NEW DOMESTIC WATER PIPING SYSTEM THE NEW SYSTEM NEW DOMESTIC WATER PIPING SYSTEM THE NEW SYSTEM NEW DOMESTIC WATER PIPING SYSTEM THE NEW SYSTEM DOMESTIC WATER PIPING SYSTEM THE NEW SYSTEM DOMESTIC WATER PIPING SYSTEM THE NEW SYSTEM WATER PIPING SYSTEM THE NEW SYSTEM WATER PIPING SYSTEM THE NEW SYSTEM PIPING SYSTEM THE NEW SYSTEM PIPING SYSTEM THE NEW SYSTEM SYSTEM THE NEW SYSTEM SYSTEM THE NEW SYSTEM THE NEW SYSTEM THE NEW SYSTEM NEW SYSTEM NEW SYSTEM SYSTEM SYSTEM SHALL BE DISINFECTED IN ACCORDANCE WITH THE STATE OF VERMONT PLUMBING BE DISINFECTED IN ACCORDANCE WITH THE STATE OF VERMONT PLUMBING BE DISINFECTED IN ACCORDANCE WITH THE STATE OF VERMONT PLUMBING DISINFECTED IN ACCORDANCE WITH THE STATE OF VERMONT PLUMBING DISINFECTED IN ACCORDANCE WITH THE STATE OF VERMONT PLUMBING IN ACCORDANCE WITH THE STATE OF VERMONT PLUMBING IN ACCORDANCE WITH THE STATE OF VERMONT PLUMBING ACCORDANCE WITH THE STATE OF VERMONT PLUMBING ACCORDANCE WITH THE STATE OF VERMONT PLUMBING WITH THE STATE OF VERMONT PLUMBING WITH THE STATE OF VERMONT PLUMBING THE STATE OF VERMONT PLUMBING THE STATE OF VERMONT PLUMBING STATE OF VERMONT PLUMBING STATE OF VERMONT PLUMBING OF VERMONT PLUMBING OF VERMONT PLUMBING VERMONT PLUMBING VERMONT PLUMBING PLUMBING PLUMBING CODE. WATER SOFTENER FURNISH AND INSTALL A CULLIGAN MODEL HE060 1.5 60K COMMERCIAL WATER AND INSTALL A CULLIGAN MODEL HE060 1.5 60K COMMERCIAL WATER AND INSTALL A CULLIGAN MODEL HE060 1.5 60K COMMERCIAL WATER INSTALL A CULLIGAN MODEL HE060 1.5 60K COMMERCIAL WATER INSTALL A CULLIGAN MODEL HE060 1.5 60K COMMERCIAL WATER A CULLIGAN MODEL HE060 1.5 60K COMMERCIAL WATER A CULLIGAN MODEL HE060 1.5 60K COMMERCIAL WATER CULLIGAN MODEL HE060 1.5 60K COMMERCIAL WATER CULLIGAN MODEL HE060 1.5 60K COMMERCIAL WATER MODEL HE060 1.5 60K COMMERCIAL WATER MODEL HE060 1.5 60K COMMERCIAL WATER HE060 1.5 60K COMMERCIAL WATER HE060 1.5 60K COMMERCIAL WATER 1.5 60K COMMERCIAL WATER 1.5 60K COMMERCIAL WATER 60K COMMERCIAL WATER 60K COMMERCIAL WATER COMMERCIAL WATER COMMERCIAL WATER WATER WATER SOFTENER CULLIGAN'S SMART CONTROLLER WITH PROGRAMMING AND MONITORING CULLIGAN'S SMART CONTROLLER WITH PROGRAMMING AND MONITORING CULLIGAN'S SMART CONTROLLER WITH PROGRAMMING AND MONITORING SMART CONTROLLER WITH PROGRAMMING AND MONITORING SMART CONTROLLER WITH PROGRAMMING AND MONITORING CONTROLLER WITH PROGRAMMING AND MONITORING CONTROLLER WITH PROGRAMMING AND MONITORING WITH PROGRAMMING AND MONITORING WITH PROGRAMMING AND MONITORING PROGRAMMING AND MONITORING PROGRAMMING AND MONITORING AND MONITORING AND MONITORING MONITORING MONITORING CAPABILITIES, REGENERATION INITIATION BY COMBINATION OF TIME CLOCK AND FLOW REGENERATION INITIATION BY COMBINATION OF TIME CLOCK AND FLOW REGENERATION INITIATION BY COMBINATION OF TIME CLOCK AND FLOW INITIATION BY COMBINATION OF TIME CLOCK AND FLOW INITIATION BY COMBINATION OF TIME CLOCK AND FLOW BY COMBINATION OF TIME CLOCK AND FLOW BY COMBINATION OF TIME CLOCK AND FLOW COMBINATION OF TIME CLOCK AND FLOW COMBINATION OF TIME CLOCK AND FLOW OF TIME CLOCK AND FLOW OF TIME CLOCK AND FLOW TIME CLOCK AND FLOW TIME CLOCK AND FLOW CLOCK AND FLOW CLOCK AND FLOW AND FLOW AND FLOW FLOW FLOW METER. CORROSION RESISTANT POSITIVE MOTOR-DRIVEN REGENERATION VALVE. CORROSION RESISTANT POSITIVE MOTOR-DRIVEN REGENERATION VALVE. CORROSION RESISTANT POSITIVE MOTOR-DRIVEN REGENERATION VALVE. RESISTANT POSITIVE MOTOR-DRIVEN REGENERATION VALVE. RESISTANT POSITIVE MOTOR-DRIVEN REGENERATION VALVE. POSITIVE MOTOR-DRIVEN REGENERATION VALVE. POSITIVE MOTOR-DRIVEN REGENERATION VALVE. MOTOR-DRIVEN REGENERATION VALVE. MOTOR-DRIVEN REGENERATION VALVE. REGENERATION VALVE. REGENERATION VALVE. VALVE. VALVE. CORROSION RESISTANT TANK MADE FROM FIBERGLASS REINFORCED POLYESTER. FLOW RESISTANT TANK MADE FROM FIBERGLASS REINFORCED POLYESTER. FLOW RESISTANT TANK MADE FROM FIBERGLASS REINFORCED POLYESTER. FLOW TANK MADE FROM FIBERGLASS REINFORCED POLYESTER. FLOW TANK MADE FROM FIBERGLASS REINFORCED POLYESTER. FLOW MADE FROM FIBERGLASS REINFORCED POLYESTER. FLOW MADE FROM FIBERGLASS REINFORCED POLYESTER. FLOW FROM FIBERGLASS REINFORCED POLYESTER. FLOW FROM FIBERGLASS REINFORCED POLYESTER. FLOW FIBERGLASS REINFORCED POLYESTER. FLOW FIBERGLASS REINFORCED POLYESTER. FLOW REINFORCED POLYESTER. FLOW REINFORCED POLYESTER. FLOW POLYESTER. FLOW POLYESTER. FLOW FLOW FLOW METER, ELECTRONIC BY-PASS, THE SOFTENER CAN BE BY-PASSED ELECTRONICALLY ELECTRONIC BY-PASS, THE SOFTENER CAN BE BY-PASSED ELECTRONICALLY ELECTRONIC BY-PASS, THE SOFTENER CAN BE BY-PASSED ELECTRONICALLY BY-PASS, THE SOFTENER CAN BE BY-PASSED ELECTRONICALLY BY-PASS, THE SOFTENER CAN BE BY-PASSED ELECTRONICALLY THE SOFTENER CAN BE BY-PASSED ELECTRONICALLY THE SOFTENER CAN BE BY-PASSED ELECTRONICALLY SOFTENER CAN BE BY-PASSED ELECTRONICALLY SOFTENER CAN BE BY-PASSED ELECTRONICALLY CAN BE BY-PASSED ELECTRONICALLY CAN BE BY-PASSED ELECTRONICALLY BE BY-PASSED ELECTRONICALLY BE BY-PASSED ELECTRONICALLY BY-PASSED ELECTRONICALLY BY-PASSED ELECTRONICALLY ELECTRONICALLY ELECTRONICALLY EITHER FROM THE UNIT OR FROM THE REMOTE MONITOR AND SHALL AUTOMATICALLY FROM THE UNIT OR FROM THE REMOTE MONITOR AND SHALL AUTOMATICALLY FROM THE UNIT OR FROM THE REMOTE MONITOR AND SHALL AUTOMATICALLY THE UNIT OR FROM THE REMOTE MONITOR AND SHALL AUTOMATICALLY THE UNIT OR FROM THE REMOTE MONITOR AND SHALL AUTOMATICALLY UNIT OR FROM THE REMOTE MONITOR AND SHALL AUTOMATICALLY UNIT OR FROM THE REMOTE MONITOR AND SHALL AUTOMATICALLY OR FROM THE REMOTE MONITOR AND SHALL AUTOMATICALLY OR FROM THE REMOTE MONITOR AND SHALL AUTOMATICALLY FROM THE REMOTE MONITOR AND SHALL AUTOMATICALLY FROM THE REMOTE MONITOR AND SHALL AUTOMATICALLY THE REMOTE MONITOR AND SHALL AUTOMATICALLY THE REMOTE MONITOR AND SHALL AUTOMATICALLY REMOTE MONITOR AND SHALL AUTOMATICALLY REMOTE MONITOR AND SHALL AUTOMATICALLY MONITOR AND SHALL AUTOMATICALLY MONITOR AND SHALL AUTOMATICALLY AND SHALL AUTOMATICALLY AND SHALL AUTOMATICALLY SHALL AUTOMATICALLY SHALL AUTOMATICALLY AUTOMATICALLY AUTOMATICALLY GO BACK INTO SERVICE AFTER A PRE-SET TIME. INTERNALLY BLOCKED PROGRESSIVE BACK INTO SERVICE AFTER A PRE-SET TIME. INTERNALLY BLOCKED PROGRESSIVE BACK INTO SERVICE AFTER A PRE-SET TIME. INTERNALLY BLOCKED PROGRESSIVE INTO SERVICE AFTER A PRE-SET TIME. INTERNALLY BLOCKED PROGRESSIVE INTO SERVICE AFTER A PRE-SET TIME. INTERNALLY BLOCKED PROGRESSIVE SERVICE AFTER A PRE-SET TIME. INTERNALLY BLOCKED PROGRESSIVE SERVICE AFTER A PRE-SET TIME. INTERNALLY BLOCKED PROGRESSIVE AFTER A PRE-SET TIME. INTERNALLY BLOCKED PROGRESSIVE AFTER A PRE-SET TIME. INTERNALLY BLOCKED PROGRESSIVE A PRE-SET TIME. INTERNALLY BLOCKED PROGRESSIVE A PRE-SET TIME. INTERNALLY BLOCKED PROGRESSIVE PRE-SET TIME. INTERNALLY BLOCKED PROGRESSIVE PRE-SET TIME. INTERNALLY BLOCKED PROGRESSIVE TIME. INTERNALLY BLOCKED PROGRESSIVE TIME. INTERNALLY BLOCKED PROGRESSIVE INTERNALLY BLOCKED PROGRESSIVE INTERNALLY BLOCKED PROGRESSIVE BLOCKED PROGRESSIVE BLOCKED PROGRESSIVE PROGRESSIVE PROGRESSIVE FLOW SYSTEM. TESTED AND CERTIFIED BY WQA AGAINST NSF/ ANSI 372, CSA B483.1 SYSTEM. TESTED AND CERTIFIED BY WQA AGAINST NSF/ ANSI 372, CSA B483.1 SYSTEM. TESTED AND CERTIFIED BY WQA AGAINST NSF/ ANSI 372, CSA B483.1 TESTED AND CERTIFIED BY WQA AGAINST NSF/ ANSI 372, CSA B483.1 TESTED AND CERTIFIED BY WQA AGAINST NSF/ ANSI 372, CSA B483.1 AND CERTIFIED BY WQA AGAINST NSF/ ANSI 372, CSA B483.1 AND CERTIFIED BY WQA AGAINST NSF/ ANSI 372, CSA B483.1 CERTIFIED BY WQA AGAINST NSF/ ANSI 372, CSA B483.1 CERTIFIED BY WQA AGAINST NSF/ ANSI 372, CSA B483.1 BY WQA AGAINST NSF/ ANSI 372, CSA B483.1 BY WQA AGAINST NSF/ ANSI 372, CSA B483.1 WQA AGAINST NSF/ ANSI 372, CSA B483.1 WQA AGAINST NSF/ ANSI 372, CSA B483.1 AGAINST NSF/ ANSI 372, CSA B483.1 AGAINST NSF/ ANSI 372, CSA B483.1 NSF/ ANSI 372, CSA B483.1 NSF/ ANSI 372, CSA B483.1 ANSI 372, CSA B483.1 ANSI 372, CSA B483.1 372, CSA B483.1 372, CSA B483.1 CSA B483.1 CSA B483.1 B483.1 B483.1 AND NSF/ANSI STANDARD 61 FOR MATERIAL REQUIREMENTS. THE CONTROL NSF/ANSI STANDARD 61 FOR MATERIAL REQUIREMENTS. THE CONTROL NSF/ANSI STANDARD 61 FOR MATERIAL REQUIREMENTS. THE CONTROL STANDARD 61 FOR MATERIAL REQUIREMENTS. THE CONTROL STANDARD 61 FOR MATERIAL REQUIREMENTS. THE CONTROL STANDARD 61 FOR MATERIAL REQUIREMENTS. THE CONTROL 61 FOR MATERIAL REQUIREMENTS. THE CONTROL 61 FOR MATERIAL REQUIREMENTS. THE CONTROL FOR MATERIAL REQUIREMENTS. THE CONTROL FOR MATERIAL REQUIREMENTS. THE CONTROL MATERIAL REQUIREMENTS. THE CONTROL MATERIAL REQUIREMENTS. THE CONTROL REQUIREMENTS. THE CONTROL REQUIREMENTS. THE CONTROL THE CONTROL THE CONTROL CONTROL CONTROL ENCLOSURE SHALL COMPLIES WITH UL 50/50E AND UL 746C STANDARDS FOR A SHALL COMPLIES WITH UL 50/50E AND UL 746C STANDARDS FOR A SHALL COMPLIES WITH UL 50/50E AND UL 746C STANDARDS FOR A COMPLIES WITH UL 50/50E AND UL 746C STANDARDS FOR A COMPLIES WITH UL 50/50E AND UL 746C STANDARDS FOR A WITH UL 50/50E AND UL 746C STANDARDS FOR A WITH UL 50/50E AND UL 746C STANDARDS FOR A UL 50/50E AND UL 746C STANDARDS FOR A UL 50/50E AND UL 746C STANDARDS FOR A 50/50E AND UL 746C STANDARDS FOR A 50/50E AND UL 746C STANDARDS FOR A AND UL 746C STANDARDS FOR A AND UL 746C STANDARDS FOR A UL 746C STANDARDS FOR A UL 746C STANDARDS FOR A 746C STANDARDS FOR A 746C STANDARDS FOR A STANDARDS FOR A STANDARDS FOR A FOR A FOR A A A NEMA 3R ENCLOSURE RATING. PROVIDE CULLIGAN 650 POUND BRINE SYSTEM TANK 3R ENCLOSURE RATING. PROVIDE CULLIGAN 650 POUND BRINE SYSTEM TANK 3R ENCLOSURE RATING. PROVIDE CULLIGAN 650 POUND BRINE SYSTEM TANK ENCLOSURE RATING. PROVIDE CULLIGAN 650 POUND BRINE SYSTEM TANK ENCLOSURE RATING. PROVIDE CULLIGAN 650 POUND BRINE SYSTEM TANK RATING. PROVIDE CULLIGAN 650 POUND BRINE SYSTEM TANK RATING. PROVIDE CULLIGAN 650 POUND BRINE SYSTEM TANK PROVIDE CULLIGAN 650 POUND BRINE SYSTEM TANK PROVIDE CULLIGAN 650 POUND BRINE SYSTEM TANK CULLIGAN 650 POUND BRINE SYSTEM TANK CULLIGAN 650 POUND BRINE SYSTEM TANK 650 POUND BRINE SYSTEM TANK 650 POUND BRINE SYSTEM TANK POUND BRINE SYSTEM TANK POUND BRINE SYSTEM TANK BRINE SYSTEM TANK BRINE SYSTEM TANK SYSTEM TANK SYSTEM TANK TANK TANK AND (16) 40 POUND BAGS OF SALT. CONTACT EVERETT WINDOVER AT CULLIGAN: (16) 40 POUND BAGS OF SALT. CONTACT EVERETT WINDOVER AT CULLIGAN: (16) 40 POUND BAGS OF SALT. CONTACT EVERETT WINDOVER AT CULLIGAN: 40 POUND BAGS OF SALT. CONTACT EVERETT WINDOVER AT CULLIGAN: 40 POUND BAGS OF SALT. CONTACT EVERETT WINDOVER AT CULLIGAN: POUND BAGS OF SALT. CONTACT EVERETT WINDOVER AT CULLIGAN: POUND BAGS OF SALT. CONTACT EVERETT WINDOVER AT CULLIGAN: BAGS OF SALT. CONTACT EVERETT WINDOVER AT CULLIGAN: BAGS OF SALT. CONTACT EVERETT WINDOVER AT CULLIGAN: OF SALT. CONTACT EVERETT WINDOVER AT CULLIGAN: OF SALT. CONTACT EVERETT WINDOVER AT CULLIGAN: SALT. CONTACT EVERETT WINDOVER AT CULLIGAN: SALT. CONTACT EVERETT WINDOVER AT CULLIGAN: CONTACT EVERETT WINDOVER AT CULLIGAN: CONTACT EVERETT WINDOVER AT CULLIGAN: EVERETT WINDOVER AT CULLIGAN: EVERETT WINDOVER AT CULLIGAN: WINDOVER AT CULLIGAN: WINDOVER AT CULLIGAN: AT CULLIGAN: AT CULLIGAN: CULLIGAN: CULLIGAN: PHONE 802-598-4400. PIPE INSULATION: INSULATE DOMESTIC WATER AND HEATING PIPING WITH MANVILLE ASJ FIBERGLASS DOMESTIC WATER AND HEATING PIPING WITH MANVILLE ASJ FIBERGLASS DOMESTIC WATER AND HEATING PIPING WITH MANVILLE ASJ FIBERGLASS WATER AND HEATING PIPING WITH MANVILLE ASJ FIBERGLASS WATER AND HEATING PIPING WITH MANVILLE ASJ FIBERGLASS AND HEATING PIPING WITH MANVILLE ASJ FIBERGLASS AND HEATING PIPING WITH MANVILLE ASJ FIBERGLASS HEATING PIPING WITH MANVILLE ASJ FIBERGLASS HEATING PIPING WITH MANVILLE ASJ FIBERGLASS PIPING WITH MANVILLE ASJ FIBERGLASS PIPING WITH MANVILLE ASJ FIBERGLASS WITH MANVILLE ASJ FIBERGLASS WITH MANVILLE ASJ FIBERGLASS MANVILLE ASJ FIBERGLASS MANVILLE ASJ FIBERGLASS ASJ FIBERGLASS ASJ FIBERGLASS FIBERGLASS FIBERGLASS PIPE INSULATION OR APPROVED EQUAL AS SPECIFIED BELOW. THE INSULATION INSULATION OR APPROVED EQUAL AS SPECIFIED BELOW. THE INSULATION INSULATION OR APPROVED EQUAL AS SPECIFIED BELOW. THE INSULATION OR APPROVED EQUAL AS SPECIFIED BELOW. THE INSULATION OR APPROVED EQUAL AS SPECIFIED BELOW. THE INSULATION APPROVED EQUAL AS SPECIFIED BELOW. THE INSULATION APPROVED EQUAL AS SPECIFIED BELOW. THE INSULATION EQUAL AS SPECIFIED BELOW. THE INSULATION EQUAL AS SPECIFIED BELOW. THE INSULATION AS SPECIFIED BELOW. THE INSULATION AS SPECIFIED BELOW. THE INSULATION SPECIFIED BELOW. THE INSULATION SPECIFIED BELOW. THE INSULATION BELOW. THE INSULATION BELOW. THE INSULATION THE INSULATION THE INSULATION THE INSULATION INSULATION INSULATION SHALL HAVE AN AVERAGE THERMAL CONDUCTIVITY NOT TO EXCEED .25 BTU IN. PER HAVE AN AVERAGE THERMAL CONDUCTIVITY NOT TO EXCEED .25 BTU IN. PER HAVE AN AVERAGE THERMAL CONDUCTIVITY NOT TO EXCEED .25 BTU IN. PER AN AVERAGE THERMAL CONDUCTIVITY NOT TO EXCEED .25 BTU IN. PER AN AVERAGE THERMAL CONDUCTIVITY NOT TO EXCEED .25 BTU IN. PER AVERAGE THERMAL CONDUCTIVITY NOT TO EXCEED .25 BTU IN. PER AVERAGE THERMAL CONDUCTIVITY NOT TO EXCEED .25 BTU IN. PER THERMAL CONDUCTIVITY NOT TO EXCEED .25 BTU IN. PER THERMAL CONDUCTIVITY NOT TO EXCEED .25 BTU IN. PER CONDUCTIVITY NOT TO EXCEED .25 BTU IN. PER CONDUCTIVITY NOT TO EXCEED .25 BTU IN. PER NOT TO EXCEED .25 BTU IN. PER NOT TO EXCEED .25 BTU IN. PER TO EXCEED .25 BTU IN. PER TO EXCEED .25 BTU IN. PER EXCEED .25 BTU IN. PER EXCEED .25 BTU IN. PER .25 BTU IN. PER .25 BTU IN. PER BTU IN. PER BTU IN. PER IN. PER IN. PER PER PER SQ. FT. PER F. PER HOUR AT A MEAN TEMPERATURE OF 75 DEGREES F. FT. PER F. PER HOUR AT A MEAN TEMPERATURE OF 75 DEGREES F. FT. PER F. PER HOUR AT A MEAN TEMPERATURE OF 75 DEGREES F. PER F. PER HOUR AT A MEAN TEMPERATURE OF 75 DEGREES F. PER F. PER HOUR AT A MEAN TEMPERATURE OF 75 DEGREES F. F. PER HOUR AT A MEAN TEMPERATURE OF 75 DEGREES F. F. PER HOUR AT A MEAN TEMPERATURE OF 75 DEGREES F. PER HOUR AT A MEAN TEMPERATURE OF 75 DEGREES F. PER HOUR AT A MEAN TEMPERATURE OF 75 DEGREES F. HOUR AT A MEAN TEMPERATURE OF 75 DEGREES F. HOUR AT A MEAN TEMPERATURE OF 75 DEGREES F. AT A MEAN TEMPERATURE OF 75 DEGREES F. AT A MEAN TEMPERATURE OF 75 DEGREES F. A MEAN TEMPERATURE OF 75 DEGREES F. A MEAN TEMPERATURE OF 75 DEGREES F. MEAN TEMPERATURE OF 75 DEGREES F. MEAN TEMPERATURE OF 75 DEGREES F. TEMPERATURE OF 75 DEGREES F. TEMPERATURE OF 75 DEGREES F. OF 75 DEGREES F. OF 75 DEGREES F. 75 DEGREES F. 75 DEGREES F. DEGREES F. DEGREES F. F. F. THICKNESS OF THE INSULATION SHALL BE AS SCHEDULED BELOW. JACKET SHALL BE OF THE INSULATION SHALL BE AS SCHEDULED BELOW. JACKET SHALL BE OF THE INSULATION SHALL BE AS SCHEDULED BELOW. JACKET SHALL BE THE INSULATION SHALL BE AS SCHEDULED BELOW. JACKET SHALL BE THE INSULATION SHALL BE AS SCHEDULED BELOW. JACKET SHALL BE INSULATION SHALL BE AS SCHEDULED BELOW. JACKET SHALL BE INSULATION SHALL BE AS SCHEDULED BELOW. JACKET SHALL BE SHALL BE AS SCHEDULED BELOW. JACKET SHALL BE SHALL BE AS SCHEDULED BELOW. JACKET SHALL BE BE AS SCHEDULED BELOW. JACKET SHALL BE BE AS SCHEDULED BELOW. JACKET SHALL BE AS SCHEDULED BELOW. JACKET SHALL BE AS SCHEDULED BELOW. JACKET SHALL BE SCHEDULED BELOW. JACKET SHALL BE SCHEDULED BELOW. JACKET SHALL BE BELOW. JACKET SHALL BE BELOW. JACKET SHALL BE JACKET SHALL BE JACKET SHALL BE SHALL BE SHALL BE BE BE WHITE ASJ. THE INSULATION SHALL BE APPLIED OVER CLEAN DRY PIPE WITH ALL ASJ. THE INSULATION SHALL BE APPLIED OVER CLEAN DRY PIPE WITH ALL ASJ. THE INSULATION SHALL BE APPLIED OVER CLEAN DRY PIPE WITH ALL THE INSULATION SHALL BE APPLIED OVER CLEAN DRY PIPE WITH ALL THE INSULATION SHALL BE APPLIED OVER CLEAN DRY PIPE WITH ALL THE INSULATION SHALL BE APPLIED OVER CLEAN DRY PIPE WITH ALL INSULATION SHALL BE APPLIED OVER CLEAN DRY PIPE WITH ALL INSULATION SHALL BE APPLIED OVER CLEAN DRY PIPE WITH ALL SHALL BE APPLIED OVER CLEAN DRY PIPE WITH ALL SHALL BE APPLIED OVER CLEAN DRY PIPE WITH ALL BE APPLIED OVER CLEAN DRY PIPE WITH ALL BE APPLIED OVER CLEAN DRY PIPE WITH ALL APPLIED OVER CLEAN DRY PIPE WITH ALL APPLIED OVER CLEAN DRY PIPE WITH ALL OVER CLEAN DRY PIPE WITH ALL OVER CLEAN DRY PIPE WITH ALL CLEAN DRY PIPE WITH ALL CLEAN DRY PIPE WITH ALL DRY PIPE WITH ALL DRY PIPE WITH ALL PIPE WITH ALL PIPE WITH ALL WITH ALL WITH ALL ALL ALL JOINTS FIRMLY TOGETHER. LONGITUDINAL JACKET LAPS AND THE BUTT STRIPS FIRMLY TOGETHER. LONGITUDINAL JACKET LAPS AND THE BUTT STRIPS FIRMLY TOGETHER. LONGITUDINAL JACKET LAPS AND THE BUTT STRIPS TOGETHER. LONGITUDINAL JACKET LAPS AND THE BUTT STRIPS TOGETHER. LONGITUDINAL JACKET LAPS AND THE BUTT STRIPS LONGITUDINAL JACKET LAPS AND THE BUTT STRIPS LONGITUDINAL JACKET LAPS AND THE BUTT STRIPS LONGITUDINAL JACKET LAPS AND THE BUTT STRIPS JACKET LAPS AND THE BUTT STRIPS JACKET LAPS AND THE BUTT STRIPS LAPS AND THE BUTT STRIPS LAPS AND THE BUTT STRIPS AND THE BUTT STRIPS AND THE BUTT STRIPS THE BUTT STRIPS THE BUTT STRIPS BUTT STRIPS BUTT STRIPS STRIPS STRIPS SHALL BE SMOOTHLY SECURED WITH SELF-SEALING LONGITUDINAL LAP JOINTS. BE SMOOTHLY SECURED WITH SELF-SEALING LONGITUDINAL LAP JOINTS. BE SMOOTHLY SECURED WITH SELF-SEALING LONGITUDINAL LAP JOINTS. SMOOTHLY SECURED WITH SELF-SEALING LONGITUDINAL LAP JOINTS. SMOOTHLY SECURED WITH SELF-SEALING LONGITUDINAL LAP JOINTS. SECURED WITH SELF-SEALING LONGITUDINAL LAP JOINTS. SECURED WITH SELF-SEALING LONGITUDINAL LAP JOINTS. WITH SELF-SEALING LONGITUDINAL LAP JOINTS. WITH SELF-SEALING LONGITUDINAL LAP JOINTS. SELF-SEALING LONGITUDINAL LAP JOINTS. SELF-SEALING LONGITUDINAL LAP JOINTS. LONGITUDINAL LAP JOINTS. LONGITUDINAL LAP JOINTS. LAP JOINTS. LAP JOINTS. JOINTS. JOINTS. PROVIDE 8” LONG, 20 GAUGE GALVANIZED PIPE SADDLES BELOW ALL HANGERS. 8” LONG, 20 GAUGE GALVANIZED PIPE SADDLES BELOW ALL HANGERS. 8” LONG, 20 GAUGE GALVANIZED PIPE SADDLES BELOW ALL HANGERS. LONG, 20 GAUGE GALVANIZED PIPE SADDLES BELOW ALL HANGERS. LONG, 20 GAUGE GALVANIZED PIPE SADDLES BELOW ALL HANGERS. 20 GAUGE GALVANIZED PIPE SADDLES BELOW ALL HANGERS. 20 GAUGE GALVANIZED PIPE SADDLES BELOW ALL HANGERS. GAUGE GALVANIZED PIPE SADDLES BELOW ALL HANGERS. GAUGE GALVANIZED PIPE SADDLES BELOW ALL HANGERS. GALVANIZED PIPE SADDLES BELOW ALL HANGERS. GALVANIZED PIPE SADDLES BELOW ALL HANGERS. PIPE SADDLES BELOW ALL HANGERS. PIPE SADDLES BELOW ALL HANGERS. SADDLES BELOW ALL HANGERS. SADDLES BELOW ALL HANGERS. BELOW ALL HANGERS. BELOW ALL HANGERS. ALL HANGERS. ALL HANGERS. HANGERS. HANGERS. SEAL ALL JACKETING TO MAINTAIN VAPOR BARRIER USING APPROVED SEALING ALL JACKETING TO MAINTAIN VAPOR BARRIER USING APPROVED SEALING ALL JACKETING TO MAINTAIN VAPOR BARRIER USING APPROVED SEALING JACKETING TO MAINTAIN VAPOR BARRIER USING APPROVED SEALING JACKETING TO MAINTAIN VAPOR BARRIER USING APPROVED SEALING TO MAINTAIN VAPOR BARRIER USING APPROVED SEALING TO MAINTAIN VAPOR BARRIER USING APPROVED SEALING MAINTAIN VAPOR BARRIER USING APPROVED SEALING MAINTAIN VAPOR BARRIER USING APPROVED SEALING VAPOR BARRIER USING APPROVED SEALING VAPOR BARRIER USING APPROVED SEALING BARRIER USING APPROVED SEALING BARRIER USING APPROVED SEALING USING APPROVED SEALING USING APPROVED SEALING APPROVED SEALING APPROVED SEALING SEALING SEALING MASTIC. PROVIDE ZESTON PRE-MOLDED PVC FITTINGS FOR ALL FITTINGS AND PROVIDE ZESTON PRE-MOLDED PVC FITTINGS FOR ALL FITTINGS AND PROVIDE ZESTON PRE-MOLDED PVC FITTINGS FOR ALL FITTINGS AND ZESTON PRE-MOLDED PVC FITTINGS FOR ALL FITTINGS AND ZESTON PRE-MOLDED PVC FITTINGS FOR ALL FITTINGS AND PRE-MOLDED PVC FITTINGS FOR ALL FITTINGS AND PRE-MOLDED PVC FITTINGS FOR ALL FITTINGS AND PVC FITTINGS FOR ALL FITTINGS AND PVC FITTINGS FOR ALL FITTINGS AND FITTINGS FOR ALL FITTINGS AND FITTINGS FOR ALL FITTINGS AND FOR ALL FITTINGS AND FOR ALL FITTINGS AND ALL FITTINGS AND ALL FITTINGS AND FITTINGS AND FITTINGS AND AND AND VALVES, INSULATE ALL FITTINGS AND VALVES WITH EQUAL VENT FIBER GLASS INSULATE ALL FITTINGS AND VALVES WITH EQUAL VENT FIBER GLASS INSULATE ALL FITTINGS AND VALVES WITH EQUAL VENT FIBER GLASS ALL FITTINGS AND VALVES WITH EQUAL VENT FIBER GLASS ALL FITTINGS AND VALVES WITH EQUAL VENT FIBER GLASS FITTINGS AND VALVES WITH EQUAL VENT FIBER GLASS FITTINGS AND VALVES WITH EQUAL VENT FIBER GLASS AND VALVES WITH EQUAL VENT FIBER GLASS AND VALVES WITH EQUAL VENT FIBER GLASS VALVES WITH EQUAL VENT FIBER GLASS VALVES WITH EQUAL VENT FIBER GLASS WITH EQUAL VENT FIBER GLASS WITH EQUAL VENT FIBER GLASS EQUAL VENT FIBER GLASS EQUAL VENT FIBER GLASS VENT FIBER GLASS VENT FIBER GLASS FIBER GLASS FIBER GLASS GLASS GLASS INSULATION. HYDRONIC HEATING PIPING SHALL BE INSULATED WITH 1 1/2” THICK PIPE HEATING PIPING SHALL BE INSULATED WITH 1 1/2” THICK PIPE HEATING PIPING SHALL BE INSULATED WITH 1 1/2” THICK PIPE PIPING SHALL BE INSULATED WITH 1 1/2” THICK PIPE PIPING SHALL BE INSULATED WITH 1 1/2” THICK PIPE SHALL BE INSULATED WITH 1 1/2” THICK PIPE SHALL BE INSULATED WITH 1 1/2” THICK PIPE BE INSULATED WITH 1 1/2” THICK PIPE BE INSULATED WITH 1 1/2” THICK PIPE INSULATED WITH 1 1/2” THICK PIPE INSULATED WITH 1 1/2” THICK PIPE WITH 1 1/2” THICK PIPE WITH 1 1/2” THICK PIPE 1 1/2” THICK PIPE 1 1/2” THICK PIPE 1/2” THICK PIPE 1/2” THICK PIPE THICK PIPE THICK PIPE PIPE PIPE INSULATION. ALL DOMESTIC COLD WATER PIPING SHALL BE INSULATED WITH 1/2” THICK DOMESTIC COLD WATER PIPING SHALL BE INSULATED WITH 1/2” THICK DOMESTIC COLD WATER PIPING SHALL BE INSULATED WITH 1/2” THICK COLD WATER PIPING SHALL BE INSULATED WITH 1/2” THICK COLD WATER PIPING SHALL BE INSULATED WITH 1/2” THICK WATER PIPING SHALL BE INSULATED WITH 1/2” THICK WATER PIPING SHALL BE INSULATED WITH 1/2” THICK PIPING SHALL BE INSULATED WITH 1/2” THICK PIPING SHALL BE INSULATED WITH 1/2” THICK SHALL BE INSULATED WITH 1/2” THICK SHALL BE INSULATED WITH 1/2” THICK BE INSULATED WITH 1/2” THICK BE INSULATED WITH 1/2” THICK INSULATED WITH 1/2” THICK INSULATED WITH 1/2” THICK WITH 1/2” THICK WITH 1/2” THICK 1/2” THICK 1/2” THICK THICK THICK INSULATION. ALL DOMESTIC HOT WATER WATER PIPING SHALL BE INSULATED WITH 1” DOMESTIC HOT WATER WATER PIPING SHALL BE INSULATED WITH 1” DOMESTIC HOT WATER WATER PIPING SHALL BE INSULATED WITH 1” HOT WATER WATER PIPING SHALL BE INSULATED WITH 1” HOT WATER WATER PIPING SHALL BE INSULATED WITH 1” WATER WATER PIPING SHALL BE INSULATED WITH 1” WATER WATER PIPING SHALL BE INSULATED WITH 1” WATER PIPING SHALL BE INSULATED WITH 1” WATER PIPING SHALL BE INSULATED WITH 1” PIPING SHALL BE INSULATED WITH 1” PIPING SHALL BE INSULATED WITH 1” SHALL BE INSULATED WITH 1” SHALL BE INSULATED WITH 1” BE INSULATED WITH 1” BE INSULATED WITH 1” INSULATED WITH 1” INSULATED WITH 1” WITH 1” WITH 1” 1” 1” 1” 1” 1” 1” THICK INSULATION.
![, VT[5] LIVE! and VT[5] LIVE SDI! VT[5] VT[5]LIVE] VT[5 ... · Virtual Studios SDI switcher HD/SD Editing VT[5] ... FEATURES Live video mixer ... Dual-channel upstream Effects bus](https://img.pdfslide.net/doc/110x75/5b0b5ac27f8b9ae61b8da9b2/-vt5-live-and-vt5-live-sdi-vt5-vt5live-vt5-studios-sdi-switcher.jpg)
