Home Monitoring and Control Kit2244-352Quick Start Guide

View the Quick Start Guides for all of your devices.

Home Monitoring and Control KitIncluded Devices

INSTEON Hub

Dimmer Modules

WiFi Camera

Motion Sensor

Open/Close Sensor

INSTEON Hub

Ethernet Port

Ethernet Cable

Factory Reset Button

Power

Power Cable

Status LEDIdleOnOff

INSTEON Hub

Setup Your Hub1 Connect the Hub to power and your

internet router using only the cables provided.

Avoid power strips and switched outlets

X

Don’t feel like searching? Scan the QR Code and tap your store.

2 Download and install the latest INSTEON for Hub App from the Apple App Store, Google Play or Amazon App Store.

insteon for hub

INSTEON for Hub

X

INSTALL

3 Join the the same WiFi network to which the INSTEON Hub is connected and launch the App. Create a new account.

INSTEON Login

New Account

Existing Account

Remote AccessYou can monitor and control your devices when away if you setup Remote Access. You can even see your IP Camera from anywhere in the world.

We’re here to help. Call us, chat with us online or visit insteon.com/kits!

If you need help setting up the Hub and/or camera for remote access, give our support team a call.

Gathering the following information will help speed up the process:

Router IP Address

Router User Name (if any)

Router Password

Wi-Fi Network Name

Wi-Fi Password

_________________

_________________

_________________

_________________

_________________

866.243.80225AM - 7PM M-F, 6AM - 3PM SAT Pacific Time

Add Devices4 Follow the on-screen instructions to

add your INSTEON devices. Quick Start Guides are included for your convenience.

Add Device

Plug-In Module Wired In

LED Bulb Thermostat

You’re done configuring your INSTEON Hub.

Create a ScheduleSchedules can be set for individual devices or entire scenes. Go to the device or scene properties and tap Schedule.

Time of Day Sunset Sunrise

12 1

23

4

567

89

10

11

Configure AlertsReceive an email or text message alert every time a sensor or device is activated. Enable alerts by visiting the device properties and tapping Alerts.

!!

Trigger a SceneSensors can activate scenes. To setup a trigger, simply add a sensor to a scene.

INSTEON SupportFor the video tutorials, product support and more, visit: insteon.com/kits

MANUAL

RAW-1323 Rev 08.05.14Protected under U.S. and foreign patents (see www.insteon.com/patents)©2013 INSTEON