Upload
doanthuy
View
219
Download
0
Embed Size (px)
Citation preview
Home Pressure Systems
The Lifestyle Series (HM) with Torrium®2Water Pressure System
Model Numbers: L6T (HM160-15T) L7T (HM60-08T) L8T (HM90-11T) L9T (HM160-19T)Compact, all stainless steel horizontal multistage centrifugal pump pressure system control options to suit application. Flows to 430lpm and heads to 65m.
APPLICATIONSAutomatic pressure system for: • Household and domestic water supply• Farming and agricultural water systems• Irrigation and turf watering systems• Automatic general water transfer
Tested in compliance with
for use in contact with safe drinking water
WHY CHOOSE THE DAVEY LIFESTYLE SERIES (HM) WITH TORRIUM®2?Horizontal multistage centrifugal pump with all hydraulic parts in stainless steel:• Suitable for high water temperatures• Corrosion & wear resistant
Axial suction & vertical discharge:• Compact design• Easy to install
Stainless steel impellers with high efficiency impeller profile & thick self-centring impeller neck rings for:• High efficiency• Reduced power consumption:• Low noise output
Air purging valve and stage porting:• Easier priming• Less susceptible to air leaks• Improved dependability
Impellers mounted directly on extended motor shaft:• Maximise performance per stage• High efficiency• Long motor & pump life• Increased wear resistance
Pump casing assembly attached to motor bracket at 8 points with o-ring seal:• Complete stainless casing• Better sealing• Longer service life
Davey built, totally enclosed fan cooled (TEFC) electric motor:• Single-phase motors have built in thermal overload
protection with automatic reset and 1.8m long power lead and Australian 3 pin plug
• Sealed and greased for life motor bearings• Over sized drive bearing• Longer life• Easy service • Economical & quiet running
TORRIUM2 CONTROLLERFor more information visit www.davey.com.au
Home Pressure Systems
HYDRAULIC LOSS
HYDRAULIC PERFORMANCE
ModelsSingle Phase
Motor(P2)
Ports (BSP) NominalOperating
Pressure kPa
MaximumPump
Pressure kPa
Tank AirPre-charge
kPaNominal Flow lpmSuction Discharge
HM60-06T 0.58 11/4" F 1" M 280 460 320 60
L7T (HM60-08T) 0.72 11/4" F 1" M 360 575 400 60
HM60-10T 0.94 11/4" F 1" M 430 690 480 60
HM90-08T 0.78 11/4" F 1" M 310 460 320 90
L8T (HM90-11T) 1.05 11/4" F 1" M 420 585 410 90
HM90-13T 1.4 11/4" F 1" M 480 680 475 90
L6T (HM160-15T) 1.5 11/2" F 1" M 340 460 320 160
L9T (HM160-19T) 1.8 11/2" F 1" M 400 600 420 160
DIMENSIONS (MM)
Type A B C D E F G H INet
Weight kg
HM60-06T 411 100 127 410 171 316 98 115 215 12.7
L7T (HM60-08T) 459 100 175 410 171 316 98 115 215 13.6
HM60-10T 459 100 175 410 171 316 98 115 215 18.4
HM90-08T 411 100 127 410 171 316 98 115 215 13.1
L8T (HM90-11T) 459 100 175 410 171 316 98 115 215 17.8
HM90-13T 502 124 175 435 206 340 98 115 215 23.6
L6T (HM160-15T) 509 124 178 435 206 340 98 115 215 23.2
L9T (HM160-19T) 509 124 178 435 206 340 98 115 215 23.5
OPERATING LIMITS
Maximum continuous flow rate 200 lpm
Maximum operating pressure 700 kPa*
Maximum current 10 amp
Cut-in pressure range 80% of pump shut-off head
Maximum water temperature 65ºC
*Dependent on optional tank pressure rating, operating pressure to 820kPa may be achieved.
Torrium2 controlled HM Series provides a constant flow water supply system with an all stainless steel pump unit. The Torrium2 is adaptive, eliminating cycling, provides loss of prime protection and over temperature cut out. Pressure tanks can be added if site conditions require additional draw off.
E
F
G
AC
B
D
H I TOTAL HEAD (m)18
0
0 50 100 150FLOW (lpm)
200
2
4
6
8
10
12
14
16
Home Pressure SystemsHome Pressure Systems
HYDRAULIC PERFORMANCE
ModelsSingle Phase
Motor(P2)
Ports (BSP) NominalOperating
Pressure kPa
MaximumPump
Pressure kPa
Tank AirPre-charge
kPa
Nominal Flow lpmSuction Discharge
HM270-19P 1.9 2" F 1½" F 200 300 180 270
HM270-25P 2.5 2" F 1½" F 250 400 230 270
INSTALLATION
Pressure switch settings assume zero suction. If the pump is to be operated on suction lift or positive inlet pressure application, pressure settings must be adjusted to suit.
PACKAGED SETS
Complete packaged systems are available on request. Pressure tank and pump mounted on common base plate.
Optional control panels also available for single and three phase models.
DIMENSIONS (MM)
E
F
H
A
C
B
D
Type A B C D E F H Net Weight kg
HM270-19P 512 124 178 280 206 240 160 26.1
HM270-25P 512 124 178 280 206 240 160 33.4
For detailed performance graphs, please refer to the HM Series technical datasheet, available at www.davey.com.au.*Three phase units on request.
OPERATING LIMITS
Maximum continuous flow rate 430 lpm
Maximum operating pressure 1000 kPa*
Maximum inlet pressure 600 kPa
Maximum water temperature 95ºC
*Dependent on optional tank pressure rating, operating pressure to 820kPa may be achieved.
All stainless steel HM Series pump unit with adjustable pressure switch and pressure gauge. Provision for Davey Supercell large draw-off capacity tank.
EnvironmentISO 14001
H/O
& M
FG S
CO
RES
BY
QualityISO 9001
H/O
& M
FG S
CO
RES
BY davey.com.au | daveynz.co.nz This literature is not a complete guide to product usage. All images provided in this document are for illustration purposes only. Further information is available from your Davey Dealer, Davey Support Centre and from the relevant product Installation and Operating Instructions. Must be read in conjunction with the relevant product Installation and Operating Instructions and all applicable statutory requirements. Product specifi cations may change without notice. ® Davey is a registered trademark of Davey Water Products Pty Ltd. © Davey Water Products Pty Ltd 2017.
Home Pressure Systems
DW
P04
75-6
/081
7
MATERIALS OF CONSTRUCTION
PART MATERIAL
Casing 304 stainless steel
Impellers 304 stainless steel
Stages (casing) 304 stainless steel
Pump shaft 316L stainless steel
Stage centring device 304 stainless steel
Mechanical seal Carbon/ceramic
Orings EPDM
Plugs 316L stainless steel
Motor shell & lantern bracketAluminium with baked polyester powder coat finish
Motor feet Xenoy
Fan cowl / rear foot (models up to 1.05kW)
Polypropylene
HYDRAULIC PERFORMANCE
0
10
20
30
40
50
60
70
80TOTAL HEAD (m)
HM90-13T
HM90-08T
FLOW (lpm)0 20 40 60 80 100 120 140
HM60HM90
50Hz
HM60-10THM60-08THM60-06T
HM90-11T
0
10
20
30
40
50
60
70
0 50 100 150 200 250 300 350 400 450
HM270-25
HM160-19T
HM160-15T
HM270-19
TOTAL HEAD (m)
FLOW (lpm)
HM160HM270
50Hz
ELECTRICAL DATA
Pump
Speed 2900rpm
Supply Voltage Single phase Three phase (selected models)
230V ±10%415V ±10%
Supply frequency 50Hz
Enclosure class HM60-06, HM60-08, HM60-10, HM90-08 & HM90-11 All other models
IP55IP56
Insulation class Class F
Torrium2
Voltage 220V-240V ± 10%
Phase Single
Hz 50 / 60
IP rating 56
Maximum load current 10A
Maximum motor size @ 240V input 1.8kW
Surge protection Varistor