1.5.0 HONEY COMB BRICK WORK The brick honey comb work shall be done with specified class of brick, laid in specified mortar. All joints and edges shall be struck flush to give an even surface. The thickness of the brick honeycomb work shall be half-brick only, unless otherwise specified. Openings shall be equal and alternate with half brick laid with a bearing of 2 cm on either side. 1.5.1 MEASUREMENTS The length and height shall be measured correct to a cm. Area shall be calculated in square meters correct to two places of decimal. Honeycomb openings shall not be deducted. 1.5.2 RATE The rate includes the cost of materials and labour involved in all the operations described above. 1.7 MOULDING AND CORNICES 1.6.0 The specifications described under 5.2 shall apply in so far these are applicable. Mouldings and cornices shall be made with bricks as specified for brick work. The bricks shall be cut and dressed to the required shape as shown in the architectural drawings. 1.6.1 Cornices shall not ordinarily project by more than 15 cm to 20 cm and this projection shall be obtained by projecting each brick course by not more than one fourth of the brick course by not more than one fourth of the brick length. For cornices projecting more than 20 cm and requiring more than quarter bricks projection, metal clamps shall be used and paid for separately.

Honey Comb

Download DOC Report

Upload
suresh84123
View
214
Download
1

Embed Size (px)

DESCRIPTION

Brick Work

Citation preview

1.5.0 HONEY COMB BRICK WORK

The brick honey comb work shall be done with specified class of brick, laid in specified mortar. All joints and edges shall be struck flush to give an even surface.

The thickness of the brick honeycomb work shall be half-brick only, unless otherwise specified. Openings shall be equal and alternate with half brick laid with a bearing of 2 cm on either side.

1.5.1 MEASUREMENTS

The length and height shall be measured correct to a cm. Area shall be calculated in square meters correct to two places of decimal. Honeycomb openings shall not be deducted.

1.5.2 RATE

The rate includes the cost of materials and labour involved in all the operations described above.

1.7 MOULDING AND CORNICES

1.6.0 The specifications described under 5.2 shall apply in so far these are applicable. Mouldings and cornices shall be made with bricks as specified for brick work. The bricks shall be cut and dressed to the required shape as shown in the architectural drawings.

1.6.1 Cornices shall not ordinarily project by more than 15 cm to 20 cm and this projection shall be obtained by projecting each brick course by not more than one fourth of the brick course by not more than one fourth of the brick length. For cornices projecting more than 20 cm and requiring more than quarter bricks projection, metal clamps shall be used and paid for separately.

1.6.2 Corbelling shall be brought roughly to shape by plastering with the specified mortar. When the mortar is still green, the mouldings shall be finished straight and true with the help of metal templates.