Upload
loren-farmer
View
224
Download
0
Embed Size (px)
DESCRIPTION
RFQAssignment & LabELC-213 Lab: Fill out a RFQ Form Create in a spread sheet or word document: a Purchase Requisition form for a Level Transmitter, then fill it out properly and to me. You can also use one that you find on the web, BUT, you must be able to fill it out properly and it to me The form must include a Actual firm that you can purchase a the level transmitter from It also must include your name and date of assignment
Citation preview
Honeywell Chapter 1
Specifications ELC-213Today
Instrumentation and Control SystemsDocumentation
Presentation by Clifford T. Johnson, PE, Control Systems Engineer
Purchasing & REQUISITIONS Chapter
5
Today Assignment & Lab ELC-213
Assignment , Lab & Video Purchasing & Requisitions
Honeywell Intro to Process Control
Instrument Techs & Engineers DO NOT PURCHASEDO NOT PURCHASE
RFQ Assignment & Lab ELC-213
Lab: Fill out a RFQ FormCreate in a spread sheet or word document:
a Purchase Requisition form for a Level Transmitter, then fill it out properly and email to me.
You can also use one that you find on the web, BUT, you must be able to fill it out properly and email it to me
The form must include a Actual firm that you can purchase a the level transmitter from
It also must include your name and date of assignment
Bid Assignment & Lab ELC-213
The Bid Package
Acquisition Assignment & Lab ELC-213
7 Steps of Acquisition
RFQ Assignment & Lab ELC-213
Req. Form
Intro Honeywell ELC-213
Process Control
Disturbances Honeywell ELC-213
Process Heater Control
Disturbances Assignment & Lab ELC-213
Control Disturbances Disturbance Definition
Change in Setpoint The setpoint is the desired value of the measured variable. Its value establishes the level of energy flow in steady state conditions.Any change in its setting will require a completely new energy picture. For instance, a higher temperature for the product out will require the control system to provide a higher rate of fuel flow.Change in Supply This is a variation in any of the energy inputs to the process. A variation in the supply pressure of the fuel, for instance, or a variation in thetemperature of the raw materials, would be supply changes.Change in Demand This is a disturbance in the output flow of energy.The most common source of such a disturbance is a change in the production rate itself. If the front office asks for more output and theproduction rate is increased, the energy would certainly have to be increased.Environmental Changes Ambient temperature or atmospheric pressurealso affect the energy balance. If the equipment is outdoors, the wind velocity and direction may also play a part in altering these energy requirements.
Feedback Honeywell ELC-213
Manual Feedback control loop
Feedback Honeywell ELC-213
Automatic Feedback control loop
Feedback Honeywell ELC-213
Feedback control loop Components
No-Feedback Honeywell ELC-213
Open vrs Closed loop control
subjects Assignment ELC-213
Homework ASSIGNMENT Web Link
SubjectSubject::Your last Name-Subject-Assignment Date
Email subject Ex:Email subject Ex: Johnson-Requisition- Johnson-Requisition-AADD
All Emails Subjects and File names must haveAll Emails Subjects and File names must have
File name Ex:File name Ex: Johnson-RFQ- Johnson-RFQ-AAD.xlsD.xls
You will lose 1-3 points for incorrect subject
Find a Purchase Requisition form on the web for an industrial device and email the
link to me
ELC-213End