Honeywell Solar Water Heater Brochure

5/20/2018 Honeywell Solar Water Heater Brochure

1/8

high performancegreat savings


2/8

With cost and energy savings like never before, Honeywell solar water heating

systems address heating requirements for varying family sizes, climatic conditions

& building types. Besides, through a strong dealer network across country & well

trained installation team, the systems are easily accessible to end users, thus

bringing solar to every home.

bringing solar to everyHoneywell solar water heating system

Easy installation & maintenance features make

the systems suitable for varied projects, right

from bungalows, apartments to large

townships, hotels, commercial and industrialbuildings

Durable and long life life expectation

more than 15 years

Specially insulated storage tanks retain hot

water for considerable amount of time, with

minimal temperature drop at night and are

suitable for Indian hard water conditions

Compact and sleek design of the system

adds to aesthetics

Triple layer evacuated tube technology for

rapid water heating

02

Corrosion resistant aluminium alloy stand for

longer life

15


3/8

homeHoneywell solar water heaters work on thermosiphon principle, a highly trusted and

efficient system of water heating. Based on phenomenon of natural convection, water

stored in the collector heats up by solar energy, becomes lighter and rises naturally into

the tank above. At the same time the cooler water in the tank flows down the pipe to

bottom of the collector, and this circulation continues to occur naturally, resulting in

overall temperature rise of water stored in the tank.

the thermosiphon principle

Solar water heating technology is

fast emerging as the most energy-efficient and inexpensive method

of water heating and perhaps the

only solution to today's challenge

of increasing energy costs, rising

pollution levels and rapidly

depleting energy sources.

Cold Water

Hot Water

Warm Water

types of solar water heating systems

the standard system specifications

Item Code CA47-1515-30 CA58-1820-30 CA58-1830-30

Capacity 100L 200L 300L

Size: Dia/Length Thermosiphon, Pressure withstand capacity: 0.5 bar

Dimensions (L x W x H) mm 1670x1920x1330 2500x1920x13301020x1590x1135

15 20 30

Inner Tank Diameter: 350mm, Thickness: = 0.6mm Diameter:370mm, Thickness: = 0.6mm

Automatic Argon-arc seamless welding:Stainless SteelSUS304-2B,

Outer Tank Diameter: 450mm, Thickness: = 0.426mm Diameter:472mm, Thickness: = 0.426mm

Standard Red Side Cover: White Painted Steel

Insulation PUF 45 mm (Honeywell HFC-245 FA)

Stand Aluminum Alloy 6063 Thickness:1.5mm-3mm Inclination: 30 Degree

Collector Triple layer Evacuated Tubes

No. of. Tubes

Size: Dia/Length 58/1800 mm 58/1800 mm47/1500 mm

Others Provision for Electrical Heater

Anode protection Included Included

Connections 3/4 3/4 3/4

03

open loopcollector system evacuated tubecpc collectorsystem

standardsystem pressurizedsystem MPP series forhard water

stand alone Commercial


4/8

technology advantageThe solar collector comprises evacuated

tubes that are optimized in geometry and

performance. These tubes are constructed

from two concentric glass tubes, half

spherically closed on one side & fused

together on the other side; the gapbetween them is evacuated & afterwards

hermetically plugged (vacuum insulation).

The internal glass tube has a highly

selective & eco friendly aluminum nitrite

sputter layer on its external surface, that

acts as an absorber, to effectively capture

solar power.

Evacuated tube specifications

Item Specification Target

Absorbance Rate after Coating (AM 1.5) 94.5%

Absorbance Rate after Evacuating (AM!.5) 93.5%

Emission Rate after Coating (80+ 50C ) 6.0%

Emission Rate after Evacuating (80+ 50C ) 6.5%2

Stagnation Parameter 240m C/KW2

Solar Radiance Exposure 3.0MJ/ m2

Average Heat Loss Coefficient 0.70W/(m.0C)

Selective Coating Material SS-Al-N/Cu

Impact Resistance Steel Ball Test: Steel ball with diameter of 30mm fall

on the evacuated tube vertically from 450mm height,the evacuated tube is not damaged

Coating No besmirching, crusting or flaking off.

Coating Lighter Area The coating colour shall be even, with

lighter area shall be smaller than 50mm

Vaccum Degree 3 x 10 -3PA

Pressure 0.6MPa

Transparent 0.89 (AM1.51S09806-1: 1994

1. Metal Insulation Layer (Copper)

Reduces heat loss and low emission rate

2. Absorption Layer

(Stainless Steel & AI-N-AI Enameled Mirror)

Anti -corrosion & Anti-oxidation

3. Anti-reflection Layer (AI-N-AI)

Ensure high absorption rate & low emission rate by

reducing reflection

the evacuated tubes

1. Inner tube

2. Solar Selective Absorption Coating

3. Vaccum Gap

4. Outer tube

5. Supporter

6. Getter

7. Absorption film

1 2 3 4 5 6 7

L

D

S

04


5/8

Capacity 100L, 200L Type: Thermosiphon

Inner Tank MPP Anti corrosion material better than SUS316 L Material: Modified Polypropylene Plastic Thickness: = 4mm

Outer Tank Material: White Painted Steel, Thickness: = 0.426mm

Insulation PUF 45mm ( Honeywell HFC-245FA)

Stand Inclination: 30 degrees, Material: Aluminum Alloy 6063, Thickness:1.5mm-3mm

No. of Tubes : 15,20 nos. Type: 58/1800 mm Evacuated Tubes

1. Metal insulation layer (Copper) 2. Absorption layer (SS & AI-N-AI) enameled mirror 3. Anti reflection layer (AI-N-AI)

Inlet-Outlet: 3/4Connections

Collector

Three target layer

tubes Impact Resistant TubesOthers Provision for Electrical Heater

stand alone system

05

specifications

specifications

Model LPHBA58-2030-30

Capacity 285L

Inner Tank Diameter: 370mm, Material: SUS304-2B, Thickness: = 0.6mmOuter Tank Diameter: 472mm, Material: SUS304-BA, Thickness: = 0.4mm, Side Cover Shining Stainless steel

Insulation PUF 45mm ( Honeywell HFC-245FA)

Copper Coil Diameter: 12mm, Thickness: 0.8mm, Length: 35m

Diameter: 58mm, Length: 2010mm, Qty: 30 Nos.

Inclination: 30 degrees(flat roof), Material: Aluminum alloy (1.5mm-3mm)

Diameter: 180/245mm(inner/outer), Material: SUS304-2B-0.5mmFilling Tank

Tube

Stand

Others Provision for EH : 1.5KW, 220V, 50Hz (opt ional ) Anode protect ion : Inc luded

Pressurized System

MPP Series for Hard Water

Honeywell Pressurised Solar Water Heaters are suitable for

bungalows, row houses and villas having hydro pneumatic water

supply system.

A high pressure withstanding capacity upto 5 bars make these

systems ideal for high pressure water applications such as shower

panels and Jacuzzis. Here heating occurs thorough a coil type heat

exchanger inside the tank.

These systems are ideal for areas having hard water supply with

hardness above 400 ppm. The tanks are made of modified

polypropylene that has a very high hardness withstanding capacity

better than SS 316.

The MPP systems can sustain hot water of hardness as high as

2000 ppm without damage to tanks.


6/8

centralized system

Open Loop collector systems are ideal for large scale heating

requirements such as in hotels, swimming pools and sports center,

where hot water is required round-the-clock.

This is an open loop system where heating occurs via natural

circulation process through non pressurized collectors, transferring

hot water to large storage tanks for further use

Open Loop Collector System

SERIES Unit LPC 1550 LPC 1570 LPC 1830 LPC 1860

Capacity 350 500 300 600

Number of evacuated tubes

LPD

50 70 30 60

Grid Measurement (Length, width) m 1942 3070x x2622 3070 x2572 1830 x2572 36702Gross Area m

m

5.96 8.05 4.7 9.462

Aperture Area 4.8 6.72 3.16 7.92

Weight of collector kg 82 112 75 135

Max. Working Pressure 0.5 0.5 0.5 0.5

Connector Diameter of inlet and outlet DN25 DN25 DN25 DN25

Material of Collector & Material of Glass Tube Header- Stainless steel, stand - Al alloy Borosilicate glass 3.3

specifications

65 91 84 168

10 13.5 12 12

75 104.5 96 180

Material of Selective Absorber Coating Aluminium nitrite

Glass tube (outside and inside thickness/wall mm 47/37/1.6/1500 58/47/1.6/1800thickness/length of tube

Color Surface treated steel

Total Water Capacity inside Tubes L

L

L

Manifold Capacity

Total Capacity

Evacuated Tube CPC Collector System

Evacuated tube collector systems cater to commercial and industrial water

heating requirements. These systems are ideal for high temperature water

applications such as process heating, boiler feeds and restaurants.

Heating occurs in a continuous copper loop with one time heat exchange.

These are fully pre-mounted units comprising CPC (compound parabolic

concentrated collector) reflector and evacuated tubes with an additional

protection sheet for better performance .

SERIES Unit CPC 1518

Number of evacuated tubes 18

o (Aperture Area), DIN 4757-4 or EN 12975 % 66.12

C with wind, in relation to aperture area W/(m k) 0.8212 2

C with wind, in relation to aperture area W/(m k ) 0.00642

oK , long (50 ), in relation to aperture area 0.9

oK , trans (50 ), in relation to aperture area 1

2Yield Forecast kWh/m a 586

Grid Measurement (length x height x depth) m 2.08x 1.64x 0.102

Gross Area m 3.412

2

Aperture Area m 3.0

Absorber Capacity m 2.4

Weight kg 54

Max. Working Pressure Burden bar 100

Max. Stagnation Temperature C 295

Connector Diameter of Inlet and Outlet Tube mm 15

Material of Collector & Material of Glass Tube Al/Cu/Glass/Silicon/PBT/EPDM/TE Borosilicate 3.3

specifications

mmMaterial of Selective Absorber Coating Aluminium Nitrite

Glass tube (ext. /int../wall thickness/tube len.) mm 47/37/1.6/150006

Bar


7/8

project gallery

Honeywell Solar Water Heating Systems are suitable for varied projects right from bungalows, villas,

apartments to large townships, hotels, commercial and industrial application.buildings

Honeywell is a Fortune 100 diversified technology and manufacturing leader, serving customers worldwide with

aerospace products and services; control technologies for buildings, homes and industry; automotive products;turbochargers; and specialty materials. Honeywell employs about 123,000 persons in more than 100 countries.Honeywell invents and manufactures innovative technologies that address tough challenges linked to global megatrends such as personal & public security; safety in the air and on the ground; and energy efficiency for factories,refineries, homes, buildings, cars and trucks. Around 50% of the companys portfolio is dedicated to solving globaldemand for more energy efficient products and services.

about Honeywell


8/8

2008 Honeywell International Inc. All rights reserved.www.honeywellautomationindia.com

BANGALORE

No.2234, 23rd Cross,

Banashankari 2nd stage,

Bangalore - 560070 (India).

Tel: 91-80-66146565

Fax: 91-80-66146589/66

CHENNAI3rd Floor, Dowlath Towers,

57, 59, 61&63, Taylors Road, Kilpauk

Chennai - 600010 (India).

Tel: 91-44-66789000

Fax: 91-44-66789189

HYDERABAD

SURANA HOUSE, 6-3-569/1,

4th Floor, Land Mark,

Opp. RTO Office, Erramanzil X Roads,

Khairtabad, Hyderabad - 500034 (India).

Tel: 91-40-66410911

Fax: 91-40-66410930

KOLKATA

PS Srijan Tech Park, 8th floor

DN-52, Sector 5, Salt Lake City

Kolkata - 700 091 (India).

Tel: 91-33-66283600

MUMBAI

Eco-elite Building, Near Marol Fire

Bridge, Marol Maroshi Road,

Next to Zakaria Industrial Estate,

Andheri (East),

Mumbai - 400059 (India).

Tel: 91-22-67650500

Fax: 91-22-67022694

NEW DELHI

Unitech Trade Center

1st Floor, Sector-43

Block C, Sushant Lok Phase-1

Gurgaon-122002 (India).

Tel: 91-124-6715000

ECC Help desk : +91-124-4172727

PUNE

56 & 57, Hadapsar Industrial Estate,

Pune - 411013. (India).

Tel: 91-20-66039400

Fax: 91-20-66039979

Email: [email protected]

REGIONAL OFFICES:

HEAD OFFICE:

Documents

Honeywell Solar Water Heater Brochure