Horizon Quantum SNMP Documentation v1.3!83!000078-01!01!03

Horizon QuantumTM

SNMP Documentation Software Release 1.02

MIB v1.02.0

Document Version 1.3

This page is left blank intentionally

NOTICE This document contains confidential information, which is proprietary to DragonWave. No part of its contents can be used, copied, disclosed, or conveyed to any party in any manner whatsoever without prior written permission from DragonWave Inc.

Copyright 2012 DragonWave Inc.

Change Log Document Release 1.0 (83-000078-01-01-00) Preliminary release for Quantum

Structure and content based on Horizon DUO SNMP documentation v1.2. Document Release 1.1 (83-000078-01-01-01) Addition of XPIC related SNMP OIDs Document Release 1.2 (83-000078-01-01-02) Addition of PLCM related SNMP OIDs

Addition of Control Queue (Qc) related SNMP OIDs Addition of PLCM configuration procedure

Addition of RLS configuration procedure OID Tables restructured for greater clarity

Document Release 1.3 (83-000078-01-01-03) Addition of SyncE related OIDs Addition of Bandwidth Doubling related OIDs Addition of IDU temperature sensor related OIDs Addition of QoS Cut-through processing related OIDs Addition of Quantum radio power off related OIDs

DragonWave Inc. Horizon Quantum SNMP Documentation

i

Table of Contents

1.0 Overview .................................................................................................... 1

1.1 Tree Structure To DragonWave Enterprise MIB ............................................................. 1 1.2 Horizon Quantum MIB Structure ..................................................................................... 2 1.3 Retrieving SNMP Objects Via Numeric OID .................................................................... 3 1.4 Wireless Ports .................................................................................................................. 3

2.0 Suggested List of Monitored Objects ...................................................... 5 3.0 DragonWave and MIB-II Interfaces .......................................................... 9 4.0 Tables ....................................................................................................... 11

4.1 SNMP Objects ............................................................................................................... 11 4.2 SNMP Traps .................................................................................................................. 38


ii

This page left blank intentionally


- 1 -

1.0 Overview SNMP (Simple Network Management Protocol) is a network management structure and protocol defined by IETF RFCs. SNMP is used for monitoring the status and performance of network devices. It is a TCP/IP based network protocol, using UDP communications.

DragonWave Horizon Quantum products implement SNMP MIB objects in both RFC-1213 defined interfaces and as enterprise branch proprietary objects. RFC-1213 statistics and counters are maintained for the internal loopback interface, and the management system interface. The DragonWave enterprise OID is 7262, and the Horizon family branch is 2, within the DragonWave OID. The Horizon family branch is further sub-divided into Horizon Compact (outdoor/ODU) systems in branch 2, Horizon DUO (indoor) systems in branch 3 and Horizon Quantum (indoor) systems in branch 4.

DragonWave Horizon products are supplied with two standard MIB definition files covering Horizon family definitions (IDU/ODU) and Horizon specific objects.

1.1 Tree Structure To DragonWave Enterprise MIB A graphical- representation of the SNMP tree to DragonWave Horizon product family branch is shown below.


- 2 -

1.2 Horizon Quantum MIB Structure The following diagram illustrates the MIB structure for Horizon Quantum systems. The folders represent the MIB branches or folders. Horizon Quantum systems fall under the DragonWave corporate enterprise number of 7262, therefore all Horizon Quantum numeric OIDs will begin with an OID of:

1 .3 .6 .1 .4 .1 .7262 .2 .4

(The above list is from MIB v1.02 released with Horizon Quantum firmware version 1.02)


- 3 -

1.3 Retrieving SNMP Objects Via Numeric OID

If a commercial NMS system (such as HP OpenView, CastleRock SNMPc, etc.) with MIB definition file import capabilities is unavailable, the SNMP statistics can be retrieved using alternative means. One such solution is to manually retrieve values of interest using programs such as SNMPGET. SNMPGET can be obtained from the NET-SNMP project at http://net-snmp.sourceforge.net. Using the SNMPGET program for example, the following command can be used to retrieve the current RSL from a DragonWave Horizon Quantum product wireless interface 1 with SNMP configured and enabled. The command below assumes we are using SNMP v1 requests, with a read-only community string of public, and accessing a DragonWave Horizon Quantum with a default IP address of 192.168.10.100.

./snmpget v1 cpublic 192.168.10.100 .1.3.6.1.4.1.7262.2.4.5.4.1.1.5

The DragonWave Horizon Quantum branch of the MIB contains sub-branches that cover various statistics and settings. These values can be retrieved and set using SNMP v1 or v2c.

1.4 Wireless Ports

The Horizon Quantum modem is available in several hardware configurations. The IDU may contain one or two Intermediate Frequency interfaces and may be connected to one or two ODU radios. In this case OID objects are referenced by index values of 1 or 2 respectively. For example, the OID of the RSL for the radio connected to wireless port 1 is .1.3.6.1.4.1.7262.2.4.5.4.1.1.5.1, while the OID of the RSL for the radio connected to wireless port 2 is .1.3.6.1.4.1.7262.2.4.5.4.1.1.5.2


- 4 -



- 5 -

2.0 Suggested List of Monitored Objects The following table offers a list of some objects that may be useful to monitor on a DragonWave Horizon Quantum system. Objects are listed by numeric OID. This is useful if the MIB import and compilation facility is not available in the chosen SNMP monitoring software package.

Note that for Ethernet port statistics **, adding numbers 1 through 8 to the numerical OID will return the data associated with specific port numbers 1 through 8.

Example: For hzQtmEnetPortRxBytes the Numeric OIDs for each of the eight ports is 1.3.6.1.4.1.7262.2.4.4.1.3.1.2.1 through 1.3.6.1.4.1.7262.2.4.4.1.3.1.2.8

Numeric OID Name Data type Description

1.3.6.1.4.1.7262.2.4.5.2.1.1.3.1 hzQtmModemChannelizedRSL Integer32

Channelized RSL of Modem 1. (Signal strength on the programmed frequency.) Divide by 10 for the actual value.

1.3.6.1.4.1.7262.2.4.5.2.1.1.3.2 hzQtmModemChannelizedRSL Integer32

Channelized RSL of Modem 2. (Signal strength on the programmed frequency.) Divide by 10 for the actual value.

1.3.6.1.4.1.7262.2.4.5.2.1.1.9.1 hzQtmModemEbToNoiseRatio Integer32

Eb/No (energy per bit/noise) of Modem 1. Divide by 10 for the actual value.

1.3.6.1.4.1.7262.2.4.5.2.1.1.9.2 hzQtmModemEbToNoiseRatio Integer32

Eb/No (energy per bit/noise) of Modem 2. Divide by 10 for the actual value.

1.3.6.1.4.1.7262.2.4.5.2.1.1.10.1 hzQtmModemEqualizerStress Integer32

Equalizer stress of Modem 1. Divide by 10 for the actual value.

1.3.6.1.4.1.7262.2.4.5.2.1.1.10.2 hzQtmModemEqualizerStress Integer32

Equalizer stress of Modem 2. Divide by 10 for the actual value.

1.3.6.1.4.1.7262.2.4.5.2.2.1.4.1 hzQtmModemRxBlocksErrors Counter64 Modem blocks received with errors on Modem 1.

1.3.6.1.4.1.7262.2.4.5.2.2.1.4.2 hzQtmModemRxBlocksErrors Counter64 Modem blocks received with errors on Modem 2.

1.3.6.1.4.1.7262.2.4.5.2.3.1.4 hzQtmWirelessEnetPortRxFramesErrors Counter64

Aggregated modem frames received in error from the RF path.

1.3.6.1.4.1.7262.2.4.5.2.3.1.5 hzQtmWirelessEnetPortRxFramesQueueDiscards Counter64

Aggregated modem frames discarded from the queue. (Unable to deliver to NIC.)


- 6 -

1.3.6.1.4.1.7262.2.4.4.2.2.6.0 hzQtmAggPortBWUtilization Integer32

Current bandwidth utilization, expressed as a percentage of system speed.

1.3.6.1.4.1.7262.2.4.4.1.3.1.2 ** hzQtmEnetPortRxBytes Counter64 The total number of bytes received on the interface, including framing characters.

1.3.6.1.4.1.7262.2.4.4.1.3.1.3 ** hzQtmEnetPortRxUcastPkts Counter64 The number of subnetwork-unicast packets delivered to a higher-layer protocol.

1.3.6.1.4.1.7262.2.4.4.1.3.1.4 ** hzQtmEnetPortRxNUcastPkts Counter64

The number of non-unicast (i.e., subnetwork - broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.

1.3.6.1.4.1.7262.2.4.4.1.3.1.5 ** hzQtmEnetPortRxDiscards Counter64

The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.

1.3.6.1.4.1.7262.2.4.4.1.3.1.6 ** hzQtmEnetPortRxErrors Counter64

The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.

1.3.6.1.4.1.7262.2.4.4.1.3.1.7 ** hzQtmEnetPortRxUnknownProtos Counter64

The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.

1.3.6.1.4.1.7262.2.4.4.1.3.1.8 ** hzQtmEnetPortTxBytes Counter64 The total number of bytes transmitted out of the interface, including framing characters.


- 7 -

1.3.6.1.4.1.7262.2.4.4.1.3.1.9 ** hzQtmEnetPortTxUcastPkts Counter64

The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.

1.3.6.1.4.1.7262.2.4.4.1.3.1.10 ** hzQtmEnetPortTxNUcastPkts Counter64

The total number of packets that higher-level protocols requested be transmitted to a non-unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.

1.3.6.1.4.1.7262.2.4.4.1.3.1.11 ** hzQtmEnetPortTxDiscards Counter64

The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.

1.3.6.1.4.1.7262.2.4.4.1.3.1.12 ** hzQtmEnetPortTxErrors Counter64 The number of outbound packets that could not be transmitted because of errors.


- 8 -



- 9 -

3.0 DragonWave and MIB-II Interfaces The DragonWave Horizon Quantum products currently maintain RFC-1213 statistics for two network interfaces, the internal network loopback interface and the management system interface. In the .iso.org.dod.internet.mgmt.mib-2.interfaces branch, instance 0 refers to the network loopback interface, and instance 1 refers to the management system interface. The data port (P1) or bridged traffic is not monitored at this time via an RFC-1213 compliant interface. A sample of the RFC-1213 defined MIB structure is shown below.


- 10 -

This page is left blank intentionally


- 11 -

4.0 Tables The following two tables contain a full breakdown of all current DragonWave Horizon Quantum SNMP objects and traps as of MIB v1.01.05.

4.1 SNMP Objects Note that Table type oids have the table contents shown in the Description column. The adjacent Table Index column shows the index oid that needs to be added to the end of the Table oid (found in the OID column) to gain access to the information. Where there are Row indexes involved, these are shown in the Name column below the associated table name. The value of a row index (leaf) needs to be added to the overall table/table index oid combination, in order to access the leaf information.

Name OID Access Type Description Table Index

hzSystemType 1.3.6.1.4.1.7262.2.1 r/o Integer The current type of the system- odu=1, idu=2, Quantum=3 horizonQuantum 1.3.6.1.4.1.7262.2.4 hzQtmSystem 1.3.6.1.4.1.7262.2.4.1 hzQtmSysGeneral 1.3.6.1.4.1.7262.2.4.1.1 hzQtmResetSystem 1.3.6.1.4.1.7262.2.4.1.1.1 r/w Integer Writing '1' to this object resets the NIC, Modem, and radio. hzQtmSaveMib 1.3.6.1.4.1.7262.2.4.1.1.2 r/w Integer Writing '1' or 'save' to this object saves all MIB values.

hzQtmOperStatus 1.3.6.1.4.1.7262.2.4.1.1.3 r/o Integer The current operational state of the system. Testing indicates that no operational packets can be passed.

hzQtmAirInterfaceEncryption 1.3.6.1.4.1.7262.2.4.1.1.4 r/o Integer OBSOLETE. This enables encryption on the air interface.

hzQtmSystemCapacityOption 1.3.6.1.4.1.7262.2.4.1.1.5 r/w Integer

Sets the system capacity options. There are four options: singleModem-singleRadio (1), multiModem-singleRadio (2). multiModem-multiRadio (3), singleModem-redundancy (4). Select (1) for a 400Mbps system. Select 2 for 800Mbps when the system is equipped with an internal or external IF Coupler. Select 3 for 800Mbps when the system is equipped with two radios connected to a Dual Polarization Radio Mount (DPRM). Select 4 to provide a redundant 400Mbps link using a Redundant Dual Radio Mount (RDRM). Notes: Setting the system capacity to 4 will fail if the primary path has not been set to either wireless_port1 or wireless_port2. Setting the system capacity to 3 will set the transmit power of wireless_port2 to the same transmit power as wireless_port1.

hzQtmSystemLedStatus 1.3.6.1.4.1.7262.2.4.1.1.6 r/o String Indicates the current LED status and colour.

hzQtmSaveL2SwConfig 1.3.6.1.4.1.7262.2.4.1.1.7 r/w Integer Writing '1' or 'save' to this object will save all L2 Switch config values.

hzQtmIduTemperature 1.3.6.1.4.1.7262.2.4.1.1.8 r/o Integer32 The IDU temperature in degree Celsius. The actual temperature is determined by dividing the number by 100. e.g. 2825 is actually 28.25 degrees Celsius.


- 12 -


hzQtmSysUpgradeSpeed 1.3.6.1.4.1.7262.2.4.1.2

hzQtmLicensedSpeedUpgradeSpeedAndKey 1.3.6.1.4.1.7262.2.4.1.2.1 r/w String Enter your key here along with the maximum speed for that key to upgrade the system. Format:[speed] [key] Example:800 abc123

hzQtmLicensedSpeedCount 1.3.6.1.4.1.7262.2.4.1.2.2 r/o Integer32 This object indicates the number of times the licensed speed has been changed successfully. It is used when generating new license keys for your system.

hzQtmSysDowngradeSpeed 1.3.6.1.4.1.7262.2.4.1.3

hzQtmLicensedSpeedDowngradeSpeed 1.3.6.1.4.1.7262.2.4.1.3.1 r/w Integer32

Reduce your licensed speed by entering a speed to this write-only object and take note of the generated key in hzQtmDowngradeLicensedSpeedKey. Format:[speed] Example:200

hzQtmLicensedSpeedCountUsedForKey 1.3.6.1.4.1.7262.2.4.1.3.2 r/o Integer32 This object indicates the number of times the licensed speed has been changed successfully. It is used when generating new license keys for your system.

hzQtmLicensedSpeedConfirmationKey 1.3.6.1.4.1.7262.2.4.1.3.3 r/o String This read-only object will show a 'key' after successfully downgrading the license speed.

hzQtmSysDowngradeSpeedDecrement 1.3.6.1.4.1.7262.2.4.1.3.4 r/o Integer32 hzQtmSysSpeed 1.3.6.1.4.1.7262.2.4.1.4

hzQtmSystemCurrentSpeed 1.3.6.1.4.1.7262.2.4.1.4.1 r/w Integer32 Changes the working speed of the horizon. Writes are only valid if system is a FLEX. Due to backwards compatibility issue, 0 value should be treated as 0 Mbps.

hzQtmSystemLicensedSpeed 1.3.6.1.4.1.7262.2.4.1.4.2 r/o Integer32 Indicates the maximum speed that this system can operate at. Due to backwards compatibility issue, 0 value should be treated as 0 Mbps.

hzQtmSystemModeTable A table of system mode settings 1.3.6.1.4.1.7262.2.4.1.4.3 r/w Table

hzQtmSystemModeEntry .1

hzQtmSystemModeIndex .1.1

hzQtmSystemModeId .1.2

hzQtmSystemModeName .1.3

hzQtmSystemModeProgrammed .1.4

hzQtmInventory 1.3.6.1.4.1.7262.2.4.1.5 hzQtmHwInventory 1.3.6.1.4.1.7262.2.4.1.5.1 hzQtmFrequencyFilePartNumber 1.3.6.1.4.1.7262.2.4.1.5.1.1 r/o String A textual string containing Part Number of the Frequency File hzQtmUnitSerialNo 1.3.6.1.4.1.7262.2.4.1.5.1.2 r/o String A textual string containing Serial Number of the Unit. hzQtmUnitAssemblyNo 1.3.6.1.4.1.7262.2.4.1.5.1.3 r/o String A textual string containing the Assembly Number of the Unit. hzQtmCcaSerialNo 1.3.6.1.4.1.7262.2.4.1.5.1.4 r/o String A textual string containing Serial no of the NCC. hzQtmCcaPartNo 1.3.6.1.4.1.7262.2.4.1.5.1.5 r/o String A textual string containing assembly no of the NCC. hzQtmRadio1SerialNo 1.3.6.1.4.1.7262.2.4.1.5.1.6 r/o String A textual string containing the serial number of radio 1 hzQtmRadio2SerialNo 1.3.6.1.4.1.7262.2.4.1.5.1.7 r/o String A textual string containing the serial number of radio 2 if configured


- 13 -


hzQtmRadio1HardwareId 1.3.6.1.4.1.7262.2.4.1.5.1.8 r/o String A textual string containing the hardware id of radio 1 hzQtmRadio2HardwareId 1.3.6.1.4.1.7262.2.4.1.5.1.9 r/o String A textual string containing the hardware id of radio 2 if configured hzQtmRadio1HardwareType 1.3.6.1.4.1.7262.2.4.1.5.1.10 r/o String A textual string containing the hardware type for radio 1 hzQtmRadio2HardwareType 1.3.6.1.4.1.7262.2.4.1.5.1.11 r/o String A textual string containing the hardware type for radio 2 hzQtmSwInventory 1.3.6.1.4.1.7262.2.4.1.5.2 hzQtmSwInvAppOmniVersionNo 1.3.6.1.4.1.7262.2.4.1.5.2.1. r/o String The version number of the Omni. hzQtmSwInvAppFirmwareVersionNo 1.3.6.1.4.1.7262.2.4.1.5.2.2. r/o String The version number of the FPGA. hzQtmSwInvFrequencyFileVersionNo 1.3.6.1.4.1.7262.2.4.1.5.2.3. r/o String The version number of the FrequencyFile. hzQtmSwInvMibVersionNo 1.3.6.1.4.1.7262.2.4.1.5.2.4. r/o String The version number of the MIB. hzQtmSwInvRadioFirmware1VersionNo 1.3.6.1.4.1.7262.2.4.1.5.2.5. r/o String The radio firmware1 version. hzQtmSwInvRadioFirmwave2VersionNo 1.3.6.1.4.1.7262.2.4.1.5.2.6. r/o String The radio firmware2 version. hzQtmSwInvAppSoftwareVersionNo 1.3.6.1.4.1.7262.2.4.1.5.2.7. r/o String The version number of the application software hzQtmSwInvBootloaderVersionNo 1.3.6.1.4.1.7262.2.4.1.5.2.8. r/o String The bootloader version number hzQtmSwInvSupportingAppVersionNo 1.3.6.1.4.1.7262.2.4.1.5.2.9. r/o String The version number for the third party applications such as ECFM etc... hzQtmSwInvOperatingSystemVersionNo 1.3.6.1.4.1.7262.2.4.1.5.2.10 r/o String The version number of the running operating system. hzQtmSwInvRadio1CurrentFirmwaveVersionNo 1.3.6.1.4.1.7262.2.4.1.5.2.11 r/o String The current running firmware version for Radio1. hzQtmSwInvRadio2CurrentFirmwaveVersionNo 1.3.6.1.4.1.7262.2.4.1.5.2.12 r/o String The current running firmware version for Radio2. hzQtmAtpc 1.3.6.1.4.1.7262.2.4.1.6

hzQtmAtpcEnable 1.3.6.1.4.1.7262.2.4.1.6.1 r/w Integer Indicates whether Automatic Transmit Power Control (ATPC) is enabled. off = 1, on = 2

hzQtmAtpcStatus 1.3.6.1.4.1.7262.2.4.1.6.2 r/o String Indicates the actual condition of ATPC: Enabled if config is on and no issues. Auto-Disabled if ATPC coordinated power condition, AAM triggered, or radio loss of link. Disabled-manual if config set to off

hzQtmAtpcCoordinatedPower 1.3.6.1.4.1.7262.2.4.1.6.3 r/w String

The Coordinated Power can be enabled by specifying the coordinated power status and coordinated power offset in a string with the following format (without the single quotes): '' The offset can optionally be specified after the 'on' string and after a single space and can be be between 0.0 and 10.0 inclusive. The 'offset' is represented in dBm and indicates the offset below TxPower. The accuracy is limited to tenths of dBm so an offset of 9.99 is recognized as 9.9 dBm. Examples:'on 5.5' or 'off'

hzQtmHitlessAam 1.3.6.1.4.1.7262.2.4.1.7

hzQtmHitlessAamStatus 1.3.6.1.4.1.7262.2.4.1.7.1 r/w Integer Read or set the Hitless Automatic Adaptive Modulation (AAM) as 'on' or 'off'. Off = 1, on = 2

hzQtmHitlessAamManualMode 1.3.6.1.4.1.7262.2.4.1.7.2 r/w Integer

Read or set the Hitless Automatic Adaptive Modulation (HAAM) Manual Mode as 'on' or 'off'.


- 14 -


hzQtmHitlessAamTable A table of Hitless AAM mode settings 1.3.6.1.4.1.7262.2.4.1.7.3 Table

hzQtmHitlessAamEntry .1

hzQtmHitlessAamIndex .1.1

hzQtmHitlessAamCurrentMode .1.2

hzQtmHitlessAamDiagnostics 1.3.6.1.4.1.7262.2.4.1.7.4

hzQtmHitlessAamModem1Diagnose 1.3.6.1.4.1.7262.2.4.1.7.4.1 r/w Integer

This service effecting write-only object accepts either 'up' or 'down' to diagnose whether the modulation speed can be increased or decreased respectively. Poll the hzQtmAamDiagnosticResult object to determine the results. Up = 1, down = 2

hzQtmHitlessAamModem1DiagnosticResult 1.3.6.1.4.1.7262.2.4.1.7.4.2 r/o String The result from Hitless AAM Diagnostic for modem1 is read from this object.

hzQtmHitlessAamModem2Diagnose 1.3.6.1.4.1.7262.2.4.1.7.4.3 r/w Integer

This service effecting write-only object accepts either 'up' or 'down' to diagnose whether the modulation speed can be increased or decreased respectively for modem2. Poll the hzQtmAamModem2DiagnosticResult object to determine the results. Up = 1, down = 2

hzQtmHitlessAamModem2DiagnosticResult 1.3.6.1.4.1.7262.2.4.1.7.4.4 r/o String The result from Hitless AAM Diagnostic for modem2 is read from this object..

hzQtmPeerSysInfo 1.3.6.1.4.1.7262.2.4.1.8 hzQtmPeerMacAddress 1.3.6.1.4.1.7262.2.4.1.8.1 r/o String The MAC Address of the peer network interface card.

hzQtmPeerIpAddress 1.3.6.1.4.1.7262.2.4.1.8.2 r/o IP Address The IP Address of the peer network interface card.

hzQtmPeerSubnetMask 1.3.6.1.4.1.7262.2.4.1.8.3 r/o IP Address The subnet mask for the peer network interface card.

hzQtmBac 1.3.6.1.4.1.7262.2.4.1.9

hzQtmBacTable 1.3.6.1.4.1.7262.2.4.1.9.1 Table

hzQtmBacEntry .1 hzQtmBacQIndex .1.1 hzQtmBacQEnable .1.2 hzQtmBacQBlockSize .1.3

hzQtmSysDiagnostics 1.3.6.1.4.1.7262.2.4.1.10

hzQtmIFPath1LoopbackAndTimeout 1.3.6.1.4.1.7262.2.4.1.10.1 r/w String

To enable or disable IF path1 loopback. If timeout is not specified it's defaulted to 30 sec and if it's set to 0, infinite loopback is intended. Enter loopback on |off along with the timeout value. Format:[on |off] [timeout in sec]. Example:on 40 Enabling loopback is service disruptive.

hzQtmIFPath2LoopbackAndTimeout 1.3.6.1.4.1.7262.2.4.1.10.2 r/w String

To enable or disable IF path2 loopback. If timeout is not specified it's defaulted to 30 sec and if it's set to 0, infinite loopback is intended. Enter loopback on |off along with the timeout value. Format:[on |off] [timeout in sec]. Example:on 40 Enabling loopback is service disruptive.


- 15 -


hzQtmRadio1LoopbackAndTimeout 1.3.6.1.4.1.7262.2.4.1.10.3 r/w String

To enable or disable radio1 loopback. This feature is only supported when 1002+ radio is connected. If timeout is not specified it's defaulted to 30 sec and if it's set to 0, infinite loopback is intended. Enter loopback on |off along with the timeout value. Format:[on |off] [timeout in sec]. Example:on 40 Enabling loopback is service disruptive.

hzQtmRadio2LoopbackAndTimeout 1.3.6.1.4.1.7262.2.4.1.10.4 r/w String

To enable or disable radio2 loopback. This feature is only supported when 1002+ radio is connected. If timeout is not specified it's defaulted to 30 sec and if it's set to 0, infinite loopback is intended. Enter loopback on |off along with the timeout value. Format:[on |off] [timeout in sec]. Example:on 40 Enabling loopback is service disruptive.

hzQtmSysLicensedFeatureGroups 1.3.6.1.4.1.7262.2.4.1.11

hzQtmSysUpgradeFeatureGroupsTable A table of system upgrade feature groups 1.3.6.1.4.1.7262.2.4.1.11.1 Table

hzQtmSysUpgradeFeatureGroupsEntry .1 hzQtmUpgradeLicensedFeatureIndex .1.1 hzQtmUpgradeLicensedFeatureKey .1.2 hzQtmUpgradeLicensedFeatureCount .1.3

hzQtmSysDowngradeFeatureGroupsTable A table of system downgrade system groups. 1.3.6.1.4.1.7262.2.4.1.11.2 Table

hzQtmSysDowngradeFeatureGroupsEntry .1 hzQtmDowngradeLicensedFeatureIndex .1.1 hzQtmDowngradeLicensedFeature .1.2 hzQtmDowngradeLicensedFeatureCount .1.3 hzQtmDowngradeLicensedFeatureKey .1.4

hzQtmSysLicensedFeatureGroupsTable 1.3.6.1.4.1.7262.2.4.1.11.3 Table

hzQtmSysLicensedFeatureGroupsEntry .1 hzQtmSysLicensedFeatureGroupIndex .1.1 hzQtmSysLicensedFeatureGroup .1.2 hzQtmSysLicensedFeatureGroupStatus .1.3

hzQtmXpic 1.3.6.1.4.1.7262.2.4.1.12

hzQtmXpicStatus 1.3.6.1.4.1.7262.2.4.1.12.1 r/w Integer Read or set the XPIC as 'on' or 'off'. XPIC feature is only available when system peer link compatibility mode is Quantum. Off = 1, on = 2

hzQtmXpicActualStatus 1.3.6.1.4.1.7262.2.4.1.12.2 r/o Integer Read the actual XPIC status as 'on' or 'off'. XPIC feature is only available when system peer link compatibility mode is Quantum. Off = 1, on = 2

hzQtmPlcm 1.3.6.1.4.1.7262.2.4.1.13

hzQtmPlcmMode 1.3.6.1.4.1.7262.2.4.1.13.1 r/w Integer Determines if the peer in the link is a Quantum or a Duo. Qtm = 1, Duo = 2. See Note 1 below.

Note 1 : This OID requires the following procedure before it will become active: Once this PLCM configuration setting has been made, the system requires writing 1 to hzQtmPlcmApplySaveResetSystem, to apply the setting, and which also resets the system. This enables PLCM after the system comes back up. Note that you need only perform this procedure once, after all PLCM settings that require this procedure have been made.


- 16 -


hzQtmPlcmConfigQtmAsDuo 1.3.6.1.4.1.7262.2.4.1.13.2 r/w Integer When enabled, a DUO compatible configuration is used when PLCM is configured as QTM. Disabled = 1, enabled = 2 See Note 1 below

hzQtmPlcmPeerOmniVersionTable A table of omni version of the peer when PLCM mode is configured as Duo

1.3.6.1.4.1.7262.2.4.1.13.3 Table

hzQtmPlcmPeerOmniVersionEntry .1 hzQtmPlcmPeerOmniVersionIndex .1.1 hzQtmPlcmPeerOmniVersionName See Note 1 below. .1.2 hzQtmPlcmPeerOmniVersionProgrammed See Note 1 below. .1.3

hzQtmPlcmMgtInterface 1.3.6.1.4.1.7262.2.4.1.13.4 r/w Integer Determines the peer link management interface when PLCM mode is configured as a Duo. In band = 1, out of band = 2, port2 extended = 3 See Note 1 below.

hzQtmPlcmDataPort 1.3.6.1.4.1.7262.2.4.1.13.5 r/w Integer

Describes the Ethernet traffic Port when PLCM mode is configured as a Duo. Data port and management port have to be same when configured as 'inband' management and data port and management port cannot be same for 'outOfBand' and 'port2 extended' configuration.See Note 1 below.

hzQtmPlcmDataVlanTag 1.3.6.1.4.1.7262.2.4.1.13.6 r/w Integer Indicates the Vlan Tag Id (1...4095)for Ethernet data when PLCM mode is configured as a Duo. See Note 1 below.

hzQtmPlcmMgmtPort 1.3.6.1.4.1.7262.2.4.1.13.7 r/w Integer

Describes the network management traffic port when PLCM mode is configured as a Duo. Data port and management port have to be same when configured as 'inband' management and data port and management port cannot be same for 'outOfBand' and 'port2 extended' configuration. See Note 1 below.

hzQtmPlcmMgmtVlanTagging 1.3.6.1.4.1.7262.2.4.1.13.8 r/w Integer Describes the network management traffic on has VLAN tagging on or not when PLCM mode is configured as a Duo.Disabled = 1, enabled = 2 See Note 1 below.

hzQtmPlcmMgmtVlanTag 1.3.6.1.4.1.7262.2.4.1.13.9 r/w Integer Indicates the Vlan Tag Id (1...4095) for management data when PLCM mode is configured as a Duo. See Note 1 below.

hzQtmPlcmMgmtTagPriority 1.3.6.1.4.1.7262.2.4.1.13.10 r/w Integer The priority for vlan tagging (0...7) for management data when PLCM mode is configured as a Duo. See Note 1 below.

hzQtmPlcmApplySaveResetSystem 1.3.6.1.4.1.7262.2.4.1.13.20 r/w Integer Writing '1' to this object applies peer link compatibility mib changes, save the mib and resets the NIC, Modem, and radio.

hzQtmBandwidthDoubling 1.3.6.1.4.1.7262.2.4.1.14 hzQtmBandwidthDoublingMode 1.3.6.1.4.1.7262.2.4.1.14.1 r/w Integer Read or set bandwidth doubling mode. hzQtmBandwidthDoublingActualMode 1.3.6.1.4.1.7262.2.4.1.14.2 r/o Integer Read the actual bandwidth doubling mode. 1=off, 2=primary, 3=secondary

hzQtmBandwidthDoublingPort 1.3.6.1.4.1.7262.2.4.1.14.3 r/w Integer

Read or set the bandwidth doubling data port interconnected between two systems. enet-port-none (1), enet-port-1 (2), enet-port-2 (3), enet-port-3 (4), enet-port-4 (5), enet-port-5 (6), enet-port-6 (7), enet-port-7 (8), enet-port-8 (9)

Note 1 : This OID requires the following procedure before it will become active: Once this PLCM configuration setting has been made, the system requires writing 1 to hzQtmPlcmApplySaveResetSystem, to apply the setting, and which also resets the system. This enables PLCM after the system comes back up. Note that you need only perform this procedure once, after all PLCM settings that require this procedure have been made.


- 17 -


hzQtmBandwidthDoublingActualPort 1.3.6.1.4.1.7262.2.4.1.14.4 r/o Integer

Read the actual bandwidth doubling data port interconnected between two systems. enet-port-none (1), enet-port-1 (2), enet-port-2 (3), enet-port-3 (4), enet-port-4 (5), enet-port-5 (6), enet-port-6 (7), enet-port-7 (8), enet-port-8 (9)

hzQtmSyncE 1.3.6.1.4.1.7262.2.4.1.15

hzQtmSyncEMode 1.3.6.1.4.1.7262.2.4.1.15.1 r/w Integer

Synchronous Ethernet support. When synchE is enabled, it can take clock from the following sources: free-run, Ethernet port3 to port8, wireless port1 or wireless port2. off (1):disables synchE support. manual (2)user specifies which port's incoming clock is to be used as clock source. If the specified port has no incoming clock, free-run will be used. auto (3):using user configured clock source priority, Quantum selects the best available clock as source. esmc (4):Quantum works in Ethernet Synchronization Messaging Channel mode. It supports Synchronous Status Message.

hzQtmSyncEPrimarySource 1.3.6.1.4.1.7262.2.4.1.15.2 r/w Integer Selects which port to be used as syncE primary clock source. p3 (1), p4 (2), p5 (3), p6 (4), p7 (5), p8 (6), wp1 (7), wp2 (8), free-run (9)

hzQtmSyncESecondarySource 1.3.6.1.4.1.7262.2.4.1.15.3

r/w Integer Selects which port to be used as syncE secondary when the master syncE is not available. p3 (1), p4 (2), p5 (3), p6 (4), p7 (5), p8 (6), wp1 (7), wp2 (8), free-run (9)

hzQtmSyncEMemberPorts 1.3.6.1.4.1.7262.2.4.1.15.4 r/w String Enter a string indicating all SyncE member ports. Example:p3 wp1 Port options:p3 p4 p5 p6 p7 p8 wp1 wp2

hzQtmSyncEForcedHoldover 1.3.6.1.4.1.7262.2.4.1.15.5

r/w String This forces SyncE into holdover mode. After the configurable timeout value, the forced holdover will be over. The forced timeout can be 0 to 300sec, 0 means infinite and default is 30sec.

hzQtmSyncERevertive 1.3.6.1.4.1.7262.2.4.1.15.6

r/w String In revertive mode, if the current source is secondary and the primary is Ok for configured amount of time, the primary will be used. The default revertive time is 10sec.

hzQtmSyncEClockSource 1.3.6.1.4.1.7262.2.4.1.15.7 r/o Integer Retrieves Synce clock source. p3 (1), p4 (2), p5 (3), p6 (4), p7 (5), p8 (6), wp1 (7), wp2 (8), free-run (9) hzQtmSyncEAcquisitionStatus 1.3.6.1.4.1.7262.2.4.1.15.8 r/o String Retrieves Synce acquisition status.

hzQtmSyncEWanderFilter

1.3.6.1.4.1.7262.2.4.1.15.9 r/w Integer

ITU G.8262 specifies different wander filter requirements for networks based on the 2.048 kbit/s hierarchy , option1(1), vs those based on the 1.544kbit/s hierarchy, option2 (2) . Option 2 specifies a low pass filter bandwidth of 0.1Hz, while option1 specifies a bandwidth between 1 and10 Hz.

hzQtmAuthentication 1.3.6.1.4.1.7262.2.4.2

hzQtmUniquePeerAuthenticationKey 1.3.6.1.4.1.7262.2.4.2.1 r/w String The serial number of the peer node that this node will communicate with. This is only used when authentication mode is set to unique.

hzQtmPeerDetectedSerialNumber 1.3.6.1.4.1.7262.2.4.2.2 r/o String The serial number of the peer node that the system is presently communicating with. This is only used when authentication is set to unique.


- 18 -


hzQtmAuthenticationMode 1.3.6.1.4.1.7262.2.4.2.3 r/w Integer

This sets the authentication mode for the system. If configured for unique authentication, a horizon node only exchanges user traffic with one other horizon node. The serial number is used in this case. If configured for group authentication, a horizon node exchanges user traffic with another horizon node of the same group and uses the authentication keys. None = 1, Unique = 2, Group = 3

hzQtmAuthenticationFailureAction 1.3.6.1.4.1.7262.2.4.2.4 r/w Integer

This sets the authentication failure action for the system. Block traffic will block all user traffic including remote management access. Pass traffic will allow all user traffic to be sent and received. Block Traffic = 1, Pass Traffic = 2

hzQtmPeerAuthenticationStatus 1.3.6.1.4.1.7262.2.4.2.5 r/o Integer

Specifies the current authentication status of the system. Authenticated means authentication is on and the system has been authenticated, notAuthenticated means authentication is off or the system has not communicated yet with the other node, explicit authentication failure means authentication is on and authentication has failed. Not Authenticated = 1, Authenticated = 2, Explicit Authentication Failure = 3

hzQtmGroupAuthenticationKey 1.3.6.1.4.1.7262.2.4.2.6 r/w String The serial number of the group that this node will communicate within. This is only used when authentication mode is set to group.

hzQtmNetworkManagement 1.3.6.1.4.1.7262.2.4.3 hzQtmMacAddress 1.3.6.1.4.1.7262.2.4.3.1 r/o String The MAC Address of the network interface card.

hzQtmIpAddress 1.3.6.1.4.1.7262.2.4.3.2 r/o IP address The IP Address of the network interface card.

hzQtmSubnetMask 1.3.6.1.4.1.7262.2.4.3.3 r/o IP address The subnet mask for the network interface card.

hzQtmDefaultGateway 1.3.6.1.4.1.7262.2.4.3.4 r/o IP address The default gateway for the network interface card

hzQtmTelnetAccessMode 1.3.6.1.4.1.7262.2.4.3.5 r/w Integer Indicates whether Telnet access is allowed. Disabled = 1, enabled = 2 hzQtmSshAccessMode 1.3.6.1.4.1.7262.2.4.3.6 r/w Integer Indicates whether ssh access is allowed. Disabled = 1, enabled = 2 hzQtmNetworkManagementInterface 1.3.6.1.4.1.7262.2.4.3.8 hzQtmNetMgmtPortList 1.3.6.1.4.1.7262.2.4.3.8.1 r/w String hzQtmNetMgmtVlanTagId 1.3.6.1.4.1.7262.2.4.3.8.2 r/w Integer32 hzQtmNetMgmtVlanTagPriority 1.3.6.1.4.1.7262.2.4.3.8.3 r/w Integer32 hzQtmNetworkInterface 1.3.6.1.4.1.7262.2.4.4 hzQtmEnetPort 1.3.6.1.4.1.7262.2.4.4.1

hzQtmEnetPortConfigTable 1.3.6.1.4.1.7262.2.4.4.1.1 Table

hzQtmEnetPortConfigEntry .1 hzQtmEnetPortIndex .1.1 hzQtmEnetPortName .1.2 hzQtmEnetPortAutoNegotiation .1.3 hzQtmEnetPortSpeed .1.4 hzQtmEnetPortDuplex .1.5


- 19 -


hzQtmEnetPortMedia .1.6 hzQtmEnetPortAdminState .1.7 hzQtmEnetPortPauseFrame .1.8 hzQtmEnetPortMaxFrameSize .1.9

hzQtmEnetPortStatusTable 1.3.6.1.4.1.7262.2.4.4.1.2 Table

hzQtmEnetPortStatusEntry .1 hzQtmEnetPortStatusIndex .1.1 hzQtmEnetPortLinkStatus .1.2 hzQtmEnetPortAutoNegotiationStatus .1.3 hzQtmEnetPortSpeedStatus .1.4 hzQtmEnetPortDuplexStatus .1.5 hzQtmEnetPortMediaStatus .1.6

hzQtmEnetPortStatsTable 1.3.6.1.4.1.7262.2.4.4.1.3 Table

hzQtmEnetPortStatsEntry .1 hzQtmEnetPortStatsIndex .1.1 hzQtmEnetPortRxBytes .1.2 hzQtmEnetPortRxUcastPkts .1.3 hzQtmEnetPortRxNUcastPkts .1.4 hzQtmEnetPortRxDiscards .1.5 hzQtmEnetPortRxErrors .1.6 hzQtmEnetPortRxUnknownProtos .1.7 hzQtmEnetPortTxBytes .1.8 hzQtmEnetPortTxUcastPkts .1.9 hzQtmEnetPortTxNUcastPkts .1.10 hzQtmEnetPortTxDiscards .1.11 hzQtmEnetPortTxErrors .1.12

hzQtmAggregatedEnetPort 1.3.6.1.4.1.7262.2.4.4.2 hzQtmAggregatedEnetPortConfig 1.3.6.1.4.1.7262.2.4.4.2.1

hzQtmEnetPortDroppedEnetFramesThresholdParameters 1.3.6.1.4.1.7262.2.4.4.2.1.1 r/w String

A read-write string:The threshold, in percent, and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows:'70 10'. The first parameter is the percentage of frames that are dropped, the second is the time in seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command.


- 20 -


hzQtmEnetPortBWUtilizationThresholdParameters 1.3.6.1.4.1.7262.2.4.4.2.1.2 r/w String

A read-write string: The percentage of available bandwidth threshold and the number of seconds that it must exceed this threshold are programmed by the user. An example of the format of the string is as follows:'70 10'. The first parameter is the threshold point in percent, the number of seconds that the threshold must be exceeded. The single quote marks i.e. ' ' are not used in the command.

hzQtmAggregatedEnetPortStats 1.3.6.1.4.1.7262.2.4.4.2.2 hzQtmAggPortTxFrames 1.3.6.1.4.1.7262.2.4.4.2.2.1 r/o Counter The current count of aggregated port egress frames. hzQtmAggPortTxBytes 1.3.6.1.4.1.7262.2.4.4.2.2.2 r/o Counter The current count of aggregated port egress bytes. hzQtmAggPortRxFramesOK 1.3.6.1.4.1.7262.2.4.4.2.2.3 r/o Counter The current count of aggregated port ingress frames. hzQtmAggPortRxBytesOK 1.3.6.1.4.1.7262.2.4.4.2.2.4 r/o Counter The current count of aggregated port ingress bytes. hzQtmAggPortRxFramesError 1.3.6.1.4.1.7262.2.4.4.2.2.5 r/o Counter The current count of aggregated port ingress errors. hzQtmAggPortBWUtilization 1.3.6.1.4.1.7262.2.4.4.2.2.6 r/o Integer The carried load over link capacity for port.

hzQtmAggPortIngressDataRate 1.3.6.1.4.1.7262.2.4.4.2.2.7 r/o Integer The data rate coming into the ethernet for port. The data rate you see is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs

hzQtmAggPortEgressDataRate 1.3.6.1.4.1.7262.2.4.4.2.2.8 r/o Integer The data rate going out of the ethernet for port. The data rate you see is multiplied by 100. e.g. A display of 1530 is actually 15.30 Mpbs.

hzQtmAggPortFramesInQueue1 1.3.6.1.4.1.7262.2.4.4.2.2.9 r/o Counter The current count of frames passed through queue 1. hzQtmAggPortFramesInQueue2 1.3.6.1.4.1.7262.2.4.4.2.2.10 r/o Counter The current count of frames passed through queue 2. hzQtmAggPortFramesInQueue3 1.3.6.1.4.1.7262.2.4.4.2.2.11 r/o Counter The current count of frames passed through queue 3. hzQtmAggPortFramesInQueue4 1.3.6.1.4.1.7262.2.4.4.2.2.12 r/o Counter The current count of frames passed through queue 4.

hzQtmAggPortFramesInQueue1Discarded 1.3.6.1.4.1.7262.2.4.4.2.2.13 r/o Counter The current count of frames received in queue 1 that were discarded due to an error. One possible reason is lack of buffer space.




hzQtmAggPortFramesInQueueC 1.3.6.1.4.1.7262.2.4.4.2.2.17 r/o Counter The current count of frames passed through queue C.

hzQtmAggPortFramesInQueueCDiscarded 1.3.6.1.4.1.7262.2.4.4.2.2.18 r/o Counter The current count of frames received in queue C that were discarded due to an error. One possible reason is lack of buffer space.

hzQtmWirelessInterface 1.3.6.1.4.1.7262.2.4.5 hzQtmWirelessInterfaceNames 1.3.6.1.4.1.7262.2.4.5.1


- 21 -


hzQtmWirelessInterfaceNameTable A table of Wireless Interface Modems 1.3.6.1.4.1.7262.2.4.5.1.1 Table

hzQtmWirelessInterfaceNameEntry .1 hzQtmWirelessInterfaceNameIndex .1.1 hzQtmWirelessInterfaceName .1.2

hzQtmWirelessInterfaceModems 1.3.6.1.4.1.7262.2.4.5.2

hzQtmModemTable A table of Wireless Interface Modems

1.3.6.1.4.1.7262.2.4.5.2.1 Table

hzQtmModemEntry .1 hzQtmModemIndex .1.1 hzQtmModemOperStatus .1.2 hzQtmModemChannelizedRSL .1.3 hzQtmModemChannelizedRSLUnsignedInt .1.4 hzQtmModemModulationType .1.5 hzQtmModemRxSpeed .1.6 hzQtmModemTxSpeed .1.7 hzQtmModemSNR .1.8 hzQtmModemEbToNoiseRatio .1.9 hzQtmModemEqualizerStress .1.10 hzQtmModemSNRThresholdParameters .1.11 . hzQtmModemChannelizedRslBelowThresholdParameters .1.12 hzQtmModemXpicEqualizerStress .1.13 hzQtmModemXPI .1.14

hzQtmModemStatsTable A table of Wireless Interface Modem Statistics

1.3.6.1.4.1.7262.2.4.5.2.2

Table

hzQtmModemStatsEntry .1 hzQtmModemStatsIndex .1.1 hzQtmModemTxBlocks .1.2 hzQtmModemRxBlocksOKs .1.3 hzQtmModemRxBlocksErrors .1.4

hzQtmWirelessEnetPortStatsTable 1.3.6.1.4.1.7262.2.4.5.2.3 Table

hzQtmWirelessEnetPortStatsEntry .1 hzQtmWirelessEnetPortIndex .1.1 hzQtmWirelessEnetPortTxFrames .1.2 hzQtmWirelessEnetPortRxFramesOK .1.3 hzQtmWirelessEnetPortRxFramesErrors .1.4 hzQtmWirelessEnetPortRxFramesQueueDiscards .1.5


- 22 -


hzQtmWirelessInterfaceIF 1.3.6.1.4.1.7262.2.4.5.3

hzQtmIntermediateFrequencyTable A table of Intermediate Frequency pat (pliu) 1.3.6.1.4.1.7262.2.4.5.3.1 Table

hzQtmIntermediateFrequencyEntry .1 hzQtmIFPathIndex .1.1 hzQtmIFPathTxLockStatus .1.2 hzQtmIFPathRxLockStatus .1.3 hzQtmIFPathLoopbackLockStatus .1.4

hzQtmWirelessInterfaceRadios 1.3.6.1.4.1.7262.2.4.5.4

hzQtmRadioTable A table of Wireless Interface Radios 1.3.6.1.4.1.7262.2.4.5.4.1 Table

hzQtmRadioEntry .1 hzQtmRadioIndex .1.1 hzQtmRadioDescription .1.2 hzQtmRadioOperStatus .1.3 hzQtmRadioLastChanged .1.4 hzQtmRadioReceiveSignalLevel .1.5 hzQtmRadioReceiveSignalLevelUnsigned .1.6 hzQtmRadioTxGain .1.7 hzQtmRadioRxGain .1.8 hzQtmRadioReset .1.9 hzQtmRadioTransmitPowerdBm .1.10 hzQtmRadioPowerOption .1.11 hzQtmRadioTxState .1.12 hzQtmRadioActualTxState .1.13 hzQtmRadioTemperature .1.14 hzQtmRadioRxCableLoss .1.15 hzQtmRadioTxCableLoss .1.16 hzQtmRadioTxCableLossChange .1.17 hzQtmRadioMaxTransmitPowerdBm .1.18 hzQtmRadioActualTransmitPowerdBm .1.19

hzQtmWirelessInterfaceRadioFrequencies 1.3.6.1.4.1.7262.2.4.5.5 hzQtmWirelessInterfaceRadio1Frequencies 1.3.6.1.4.1.7262.2.4.5.5.1

hzQtmRadio1FreqGroupSelected 1.3.6.1.4.1.7262.2.4.5.5.1.1 r/w Integer

The frequency group selected for Radio 1. The frequency sub bands are divided into frequency groups txHigh and txLow. An horizon system must have one node configured to txLow and the other node configure to txHigh


- 23 -


hzQtmRadio1BandTable A table of radio bands for Radio 1. Frequency bands are divided into sub bands. i.e. FCC 23 Ghz Band is comprised of fcc23a, fcc23b, fcc23c and fcc23d which make up the entire FCC23 band

1.3.6.1.4.1.7262.2.4.5.5.1.2 Table

hzQtmRadio1BandEntry .1 hzQtmRadio1BandIndex .1.1 hzQtmRadio1BandId .1.2 hzQtmRadio1BandName .1.3 hzQtmRadio1BandProgrammed .1.4

hzQtmRadio1TxHighFreqTable A table of txHigh frequency settings for Radio 1

1.3.6.1.4.1.7262.2.4.5.5.1.3 Table

hzQtmRadio1TxHighFreqEntry .1 hzQtmRadio1TxHighFreqIndex .1.1 hzQtmRadio1TxHighFreqChannelIndex .1.2 hzQtmRadio1TxHighFreqTransmitRfFrequency .1.3 hzQtmRadio1TxHighFreqReceiveRfFrequency .1.4 hzQtmRadio1TxHighFreqProgrammed .1.5

hzQtmRadio1TxLowFreqTable A table of txLow frequency settings for Radio 1

1.3.6.1.4.1.7262.2.4.5.5.1.4 Table

hzQtmRadio1TxLowFreqEntry .1 hzQtmRadio1TxLowFreqIndex .1.1 hzQtmRadio1TxLowFreqChannelIndex .1.2 hzQtmRadio1TxLowFreqTransmitRfFrequency .1.3 hzQtmRadio1TxLowFreqReceiveRfFrequency .1.4 hzQtmRadio1TxLowFreqProgrammed .1.5

hzQtmRadio1ProgrammedFrequency 1.3.6.1.4.1.7262.2.4.5.5.1.5 hzQtmRadio1ProgrammedFrequencyChannel 1.3.6.1.4.1.7262.2.4.5.5.1.5.1 r/o String The channel that has been programmed for Radio 1. hzQtmRadio1ProgrammedFrequencyTxRf 1.3.6.1.4.1.7262.2.4.5.5.1.5.2 r/o Integer The programmed RF TX frequency in KHz. hzQtmRadio1ProgrammedFrequencyRxRf 1.3.6.1.4.1.7262.2.4.5.5.1.5.3 r/o Integer The RF RX frequency in KHz. hzQtmWirelessInterfaceRadio2Frequencies 1.3.6.1.4.1.7262.2.4.5.5.2

hzQtmRadio2FreqGroupSelected 1.3.6.1.4.1.7262.2.4.5.5.2.1 r/o Integer

The frequency group selected for Radio 2. The frequency sub-bands are divided into frequency groups txHigh and txLow. An horizon system must have one node configured to txLow and the other node configure to txHigh

hzQtmRadio2BandTable A table of Radio Bands for Radio 2

1.3.6.1.4.1.7262.2.4.5.5.2.2 Table

hzQtmRadio2BandEntry .1 hzQtmRadio2BandIndex .1.1 hzQtmRadio2BandId .1.2 hzQtmRadio2BandName .1.3 hzQtmRadio2BandProgrammed .1.4

hzQtmRadio2TxHighFreqTable 1.3.6.1.4.1.7262.2.4.5.5.2.3 Table hzQtmRadio2TxHighFreqEntry .1


- 24 -


A table of txHigh frequency settings for Radio 2

hzQtmRadio2TxHighFreqIndex .1.1 hzQtmRadio2TxHighFreqChannelIndex .1.2 hzQtmRadio2TxHighFreqTransmitRfFrequency .1.3 hzQtmRadio2TxHighFreqReceiveRfFrequency .1.4 hzQtmRadio2TxHighFreqProgrammed .1.5

hzQtmRadio2TxLowFreqTable A table of txLow frequency settings for Radio 2

1.3.6.1.4.1.7262.2.4.5.5.2.4 Table

hzQtmRadio2TxLowFreqEntry .1 hzQtmRadio2TxLowFreqIndex .1.1 hzQtmRadio2TxLowFreqChannelIndex .1.2 hzQtmRadio2TxLowFreqTransmitRfFrequency .1.3 hzQtmRadio2TxLowFreqReceiveRfFrequency .1.4 hzQtmRadio2TxLowFreqProgrammed .1.5

hzQtmRadio2ProgrammedFrequency 1.3.6.1.4.1.7262.2.4.5.5.2.5 hzQtmRadio2ProgrammedFrequencyChannel 1.3.6.1.4.1.7262.2.4.5.5.2.5.1 r/o String The channel that has been programmed for Radio 2. hzQtmRadio2ProgrammedFrequencyTxRf 1.3.6.1.4.1.7262.2.4.5.5.2.5.2 r/o Integer The programmed RF TX frequency in KHz. hzQtmRadio2ProgrammedFrequencyRxRf 1.3.6.1.4.1.7262.2.4.5.5.2.5.3 r/o Integer The RF RX frequency in KHz. hzQtmWirelessInterfaceAntenna 1.3.6.1.4.1.7262.2.4.5.6

hzQtmAntennaDiameter 1.3.6.1.4.1.7262.2.4.5.6.1 r/o Integer This defines the diameter of the antenna represented in inches. 12 = 1, 24 = 2, 36 = 3, 48 = 4, 72 = 5

hzQtmAntenna1Tilt 1.3.6.1.4.1.7262.2.4.5.6.2 r/o Integer This defines the position of the antenna for radio 1. Unknown = 1, vertical = 2, horizontal = 3, flat = 4 hzQtmAntenna2Tilt 1.3.6.1.4.1.7262.2.4.5.6.3 r/o Integer This defines the position of the antenna for radio 2. Unknown = 1, vertical = 2, horizontal = 3, flat = 4 hzQtmWirelessInterfaceRedundancy 1.3.6.1.4.1.7262.2.4.5.7

hzQtmWirelessInterfaceRedundancyActiveWirelessPort 1.3.6.1.4.1.7262.2.4.5.7.1 r/o Integer This attribute indicates the active wireless port and is only applicable when the system capacity has been configured to singleCarrier-redundancy. wireless port 1 = 1, wireless port 2 = 2, none = 3

hzQtmWirelessInterfaceRedundancyPrimaryWirelessPort 1.3.6.1.4.1.7262.2.4.5.7.2 r/w Integer

This attribute indicates the primary wireless port and is only applicable when the system capacity has been configured to singleCarrier-redundancy. The primary wireless port indicates which wireless port is connected to the 'primary' port on the RDRM coupler. wireless port 1 = 1, wireless port 2 = 2, none = 3

hzQtmWirelessInterfaceRedundancySwitchingAlgorithm 1.3.6.1.4.1.7262.2.4.5.7.3 r/w Integer

This attribute selects the rule that will determine when a redundant path switch will take place. There are two options: manual and algorithm-based. The 'Manual' option turns off the automatic path switching feature. Only an operator can switch the active path. Manual = 1, algorithm based = 2

hzQtmWirelessInterfaceRedundancySwitchCause 1.3.6.1.4.1.7262.2.4.5.7.4 r/o String This string indicates the reason that a redundancy switch has occurred. If the active port is the primary port then this string is empty.

hzQtmWirelessInterfaceRedundancyRemoveFaulty 1.3.6.1.4.1.7262.2.4.5.7.5 r/w Integer This object removes the specified port from the faulty port list. wireless port 1 = 1, wireless port 2 = 2


- 25 -


hzQtmWirelessInterfaceRedundancyDiagnostics 1.3.6.1.4.1.7262.2.4.5.7.6

hzQtmWirelessInterfaceRedundancyDiagnose 1.3.6.1.4.1.7262.2.4.5.7.6.1 r/w Integer This write-only object will diagnose problems with switching paths. Write diagnose (1) to this object and check results in hzQtmWirelessInterfaceRedundancyDiagnosticResult object

hzQtmWirelessInterfaceRedundancyDiagnosticResult 1.3.6.1.4.1.7262.2.4.5.7.6.2 r/o String

The result from Redundancy Diagnostic is read from this object. Note that the diagnostic result presented in this object is private to SNMP initiated diagnostics. If a diagnostic is initiated from the CLI or WEB, this result will remain unchanged.

hzQtmWirelessInterfaceRedundancyRadioSwitch 1.3.6.1.4.1.7262.2.4.5.7.7

hzQtmWirelessInterfaceRedundancySwitchRadio 1.3.6.1.4.1.7262.2.4.5.7.7.1 r/w Integer This write-only object will switch radio redunancy. Write switch (1) to this object and check results in hzQtmWirelessInterfaceRedundancySwitchRadioResult object.

hzQtmWirelessInterfaceRedundancySwitchRadioResult 1.3.6.1.4.1.7262.2.4.5.7.7.2 r/o String The Switch Radio result is presented in this object. hzQtmCalendar 1.3.6.1.4.1.7262.2.4.6

hzQtmDate 1.3.6.1.4.1.7262.2.4.6.1 r/w String

A string in the format as follows: XX/YY/ZZ Where XX =day of month (range 01 to 31) YY =month of year(range 01 to 12) ZZ =year (range 01 - 99)

hzQtmTime 1.3.6.1.4.1.7262.2.4.6.2 r/w String

A string in the format as follows: aa:bb:cc.ddd Where aa =hour of day ( range 00 to 23 ) bb =minute of hour ( range 00 to 59 ) cc =second of minute( range 00 to 59 ) ddd =thousandths of second (range 000 to 999)

hzQtmAlarms 1.3.6.1.4.1.7262.2.4.7

hzQtmClearAlarmCounters 1.3.6.1.4.1.7262.2.4.7.1 r/w Integer Clears the alarm counters for the specified group. nic counters = 1, modem counters = 2, radio counters = 3, all counters = 4, other counters = 5

hzQtmSystemAlarms 1.3.6.1.4.1.7262.2.4.7.2

hzQtmExplicitiAuthenticationFailureAlarm 1.3.6.1.4.1.7262.2.4.7.2.1 r/o Integer

Authentication of the peer horizon node has failed. The severity is critical, the probable cause is an incorrect authentication configuration on horizon faulty cable between the modem and radio, and recommended course of action is to check both ends of the link. Off = 1, on = 2

hzQtmExplicitiAuthenticationFailureCounts 1.3.6.1.4.1.7262.2.4.7.2.2 r/o Counter Indicates the number of times explicit authentication has failed.

hzQtmAamConfigMismatchAlarm 1.3.6.1.4.1.7262.2.4.7.2.3 r/o Integer In the near end Automatic Adaptive Modulation(AAM) feature set to on and in peer it is set to off. Off = 1, on = 2

hzQtmAamConfigMismatchCounts 1.3.6.1.4.1.7262.2.4.7.2.4 r/o Counter Indicates the approximate number of seconds AAMConfigMismatch alarm has been active.

hzQtmAamActiveAlarm 1.3.6.1.4.1.7262.2.4.7.2.5 r/o Integer Indicates aam is active and system running on lower modulation. Off = 1, on = 2

hzQtmAamActiveCounts 1.3.6.1.4.1.7262.2.4.7.2.6 r/o Counter Indicates the approximate number of seconds AamActive alarm has been active.

hzQtmSntpServerUnreachableAlarm 1.3.6.1.4.1.7262.2.4.7.2.7 r/o Integer All of the SNTP servers are not available. Off = 1, on = 2


- 26 -


hzQtmSntpServerUnreachableCounts 1.3.6.1.4.1.7262.2.4.7.2.8 r/o Counter Indicates how long in seconds all of the SNTP servers are not available. hzQtmFrequencyFileInvalidAlarm 1.3.6.1.4.1.7262.2.4.7.2.9 r/o Integer Executing frequency file is invalid. Off = 1, on = 2 hzQtmFrequencyFileInvalidCounts 1.3.6.1.4.1.7262.2.4.7.2.10 r/o Counter Indicates the time (in secs) since this alarm exist hzQtmFanFailureAlarm 1.3.6.1.4.1.7262.2.4.7.2.11 r/o Integer Indicates whether any of the two Fans have failed. Off = 1, on = 2 hzQtmFanFailureCounts 1.3.6.1.4.1.7262.2.4.7.2.12 r/o Counter Indicates the number of seconds that the fan has failed for.

hzQtmRedundancyPrimaryPortNotSetAlarm 1.3.6.1.4.1.7262.2.4.7.2.13 r/o Integer The redundancy primary port used for redundancy has not been set. Off = 1, on = 2

hzQtmRedundancyPrimaryPortNotSetCounts 1.3.6.1.4.1.7262.2.4.7.2.14 r/o Counter Indicates the approximate number of seconds that this alarm has been active.

hzQtmRedundancySecondaryPortActiveAlarm 1.3.6.1.4.1.7262.2.4.7.2.15 r/o Integer The active wireless port has switched to the secondary wireless port. Off = 1, on = 2

hzQtmRedundancySecondaryPortActiveCounts 1.3.6.1.4.1.7262.2.4.7.2.16 r/o Counter Indicates the approximate number of seconds that this alarm has been active.

hzQtmRedundancyPrimaryPortFaultyAlarm 1.3.6.1.4.1.7262.2.4.7.2.17 r/o Integer The redundancy primary wireless port is faulty. Off = 1, on = 2

hzQtmRedundancyPrimaryPortFaultyCounts 1.3.6.1.4.1.7262.2.4.7.2.18 r/o Counter Indicates the approximate number of seconds that this alarm has been active.

hzQtmRedundancySecondaryPortFaultyAlarm 1.3.6.1.4.1.7262.2.4.7.2.19 r/o Integer The redundancy secondary wireless port is faulty. Off = 1, on = 2

hzQtmRedundancySecondaryPortFaultyCounts 1.3.6.1.4.1.7262.2.4.7.2.20 r/o Counter Indicates the approximate number of seconds that this alarm has been active.

hzQtmAtpcConfigMismatchAlarm 1.3.6.1.4.1.7262.2.4.7.2.21 r/o Integer In the near end ATPC feature is set to on and in peer it is set to off. Off = 1, on = 2

hzQtmAtpcConfigMismatchCounts 1.3.6.1.4.1.7262.2.4.7.2.22 r/o Counter Indicates the approximate number of seconds AtpcConfigMismatch alarm has been active.

hzQtmDroppedEnetFramesThresholdAlarm 1.3.6.1.4.1.7262.2.4.7.2.23 r/o Integer The threshold for number of frames dropped has been exceeded. The threshold and the number of seconds that it must exceed this threshold are programmed by the user. Off = 1, on = 2

hzQtmDroppedEnetFramesThresholdCounts 1.3.6.1.4.1.7262.2.4.7.2.24 r/o Counter Indicates the approximate time, in seconds, that this alarm has been in the active state

hzQtmBandwidthUtilizationThresholdAlarm 1.3.6.1.4.1.7262.2.4.7.2.25 r/o Integer The threshold for the percentage of available bandwidth has been exceeded. The threshold and the number of seconds that it must exceed this threshold are programmed by the user. Off = 1, on = 2

hzQtmBandwidthUtilizationThresholdCounts 1.3.6.1.4.1.7262.2.4.7.2.26 r/o Counter Indicates the approximate time, in seconds, that this alarm has been in the active state hzQtmRlsMismatchAlarm 1.3.6.1.4.1.7262.2.4.7.2.27 r/o Integer RLS configurations on the pair of systems are mismatched. Off = 1, on = 2 hzQtmRlsMismatchCounts 1.3.6.1.4.1.7262.2.4.7.2.28 r/o Counter Indicates the approximate time, in seconds, that this alarm has been in the active state hzQtmRLSQueueBasedShutdownActivatedAlarm 1.3.6.1.4.1.7262.2.4.7.2.29 r/o Integer RLS Queue-Based shutdown is activated. Off = 1, on = 2 hzQtmRLSQueueBasedShutdownActivatedCounts 1.3.6.1.4.1.7262.2.4.7.2.30 r/o Counter Indicates the approximate time, in seconds, that this alarm has been in the active state hzQtmFpgaProgrammingErrorAlarm 1.3.6.1.4.1.7262.2.4.7.2.31 r/o Integer Encountered some problem while programming the modem. Off = 1, on = 2 hzQtmFpgaProgrammingErrorCounts 1.3.6.1.4.1.7262.2.4.7.2.32 r/o Counter Indicates the approximate number of seconds that this alarm has been active.


- 27 -


hzQtmMibChangeNotSavedAlarm 1.3.6.1.4.1.7262.2.4.7.2.33 r/o Integer The system has automatically re-programmed the mib. It requires a save mib action to save the changes to flash, otherwise the changes will be lost on reset. View the logs to see what was modified in the mib. Off = 1, on = 2

hzQtmMibChangeNotSavedCounts 1.3.6.1.4.1.7262.2.4.7.2.34 r/o Counter Indicates the approximate number of seconds that this alarm has been active. hzQtmBadSystemConfigurationAlarm 1.3.6.1.4.1.7262.2.4.7.2.35 r/o Integer The system has been configured incorrectly. Check the logs or use the CLI get alarms to isolate the cause. Off = 1, on = 2 hzQtmBadSystemConfigurationCounts 1.3.6.1.4.1.7262.2.4.7.2.36 r/o Counter Indicates the approximate number of seconds that this alarm has been active. hzQtmPartnerNodeAlarm 1.3.6.1.4.1.7262.2.4.7.2.37 r/o Integer The configuration in the partner node does not match this system. hzQtmPartnerNodeAlarmCounts 1.3.6.1.4.1.7262.2.4.7.2.38 r/o Counter Indicates the approximate number of seconds that this alarm has been active.

hzQtmBandwidthDoublingInvalidLinkConfigAlarm 1.3.6.1.4.1.7262.2.4.7.2.39 r/o Integer Bandwidth doubling link is configured incorrectly. i.e., Primary is synchronized with remote primary, and secondary is synchronized with remote secondary.

hzQtmBandwidthDoublingInvalidLinkConfigCounts 1.3.6.1.4.1.7262.2.4.7.2.40 r/o Counter Indicates the approximate number of seconds that this alarm has been active. hzQtmBandwidthDoublingWrongPortConnectedAlarm 1.3.6.1.4.1.7262.2.4.7.2.41 r/o Integer Bandwidth doubling wrong port is connected to local partner. hzQtmBandwidthDoublingWrongPortConnectedCount 1.3.6.1.4.1.7262.2.4.7.2.42 r/o Counter Indicates the approximate number of seconds that this alarm has been active. hzQtmSynceLostLockAlarm 1.3.6.1.4.1.7262.2.4.7.2.43 r/o Integer SyncE feature is currently out of lock. hzQtmSynceLostLockCount 1.3.6.1.4.1.7262.2.4.7.2.44 r/o Counter Indicates the approximate number of seconds that this alarm has been active. hzQtmSynceSecondarySourceInUseAlarm 1.3.6.1.4.1.7262.2.4.7.2.45 r/o Integer SyncE feature is synchronized to secondary clock source. hzQtmSynceSecondarySourceInUseCount 1.3.6.1.4.1.7262.2.4.7.2.46 r/o Counter Indicates the approximate number of seconds that this alarm has been active. hzQtmNetworkInterfaceAlarms 1.3.6.1.4.1.7262.2.4.7.3

hzQtmEnetPortAlarmsTable 1.3.6.1.4.1.7262.2.4.7.3.1 Table

hzQtmEnetPortAlarmsEntry .1 hzQtmEnetPortAlarmsIndex .1.1 hzQtmEnetPortEthernetLinkDownAlarm .1.2 hzQtmEnetPortEthernetLinkDownCounts .1.3

hzQtmWirelessInterfaceAlarms 1.3.6.1.4.1.7262.2.4.7.4 hzQtmModemAlarms 1.3.6.1.4.1.7262.2.4.7.4.1

hzQtmModemAlarmsTable A table of Modem Alarms.

1.3.6.1.4.1.7262.2.4.7.4.1.1 Table

hzQtmModemAlarmsEntry .1 hzQtmModemAlarmsIndex .1.1 hzQtmModemRxLossOfSignalAlarm .1.2 hzQtmModemRxLossOfSignalCounts .1.3 hzQtmModemTxLossOfSyncAlarm .1.4 hzQtmModemTxLossOfSyncCounts .1.5


- 28 -


hzQtmModemSnrBelowThresholdAlarm .1.6 hzQtmModemSnrBelowThresholdCounts .1.7 hzQtmModemEqualizerStressExceedThresholdAlarm .1.8 hzQtmModemEquilizerStressExceedThresholdCounts .1.9 hzQtmModemRLSShutdownActivatedAlarm .1.10 hzQtmModemRLSShutdownActivatedCounts .1.11 hzQtmModemXPICEquStressExceedThresholdAlarm .1.12 hzQtmModemXPICEquStressExceedThresholdCounts .1.13

hzQtmRadioAlarms 1.3.6.1.4.1.7262.2.4.7.4.2

hzQtmRadioAlarmsTable A table of radio alarms

1.3.6.1.4.1.7262.2.4.7.4.2.1 Table

hzQtmRadioAlarmsEntry .1 hzQtmRadioAlarmsIndex .1.1 hzQtmRadioSynthLostLockAlarm .1.2 hzQtmRadioSynthLostLockCounts .1.3 hzQtmRadioLostCommunicationAlarm .1.4 hzQtmRadioLostCommunicationCounts .1.5 hzQtmRadioMismatchAlarm .1.6 hzQtmRadioMismatchCounts .1.7 hzQtmRadioPowerAmpAlarm .1.8 hzQtmRadioPowerAmpCounts .1.9 hzQtmRadioExcessiveTxCableLossAlarm .1.10 hzQtmRadioExcessiveTxCableLossCounts .1.11 hzQtmRadioRslBelowThresholdAlarm .1.12 hzQtmRadioRslBelowThresholdCounts .1.13 hzQtmRadioHighPowerTxDetectorAlarm .1.14 hzQtmRadioHighPowerTxDetectorCounts .1.15 hzQtmRadioRedundancySerialNumMismatchAlarm .1.16 hzQtmRadioRedundancySerialNumMismatchCounts .1.17 hzQtmRadioExcessiveTxCableLossChangeAlarm .1.18 hzQtmRadioExcessiveTxCableLossChangeCounts .1.19 hzQtmRadioExcessiveRxCableLossAlarm .1.20 hzQtmRadioExcessiveRxCableLossCounts .1.21 hzQtmRadioAtpcTxAtMaxPowerAlarm .1.22 hzQtmRadioAtpcTxAtMaxPowerCounts .1.23


- 29 -


hzQtmRadioSwDownloadFailedAlarm .1.24 hzQtmRadioSwDownloadFailedCounts .1.25 hzQtmRadioDrainCurrentAlarm .1.26 hzQtmRadioDrainCurrentCounts .1.27

hzQtmRadioPowerOffAlarm .1.28 hzQtmRadioPowerOffCounts .1.29 hzQtmIFAlarms 1.3.6.1.4.1.7262.2.4.7.4.3

hzQtmIFAlarmsTable A table of IF Alarms

1.3.6.1.4.1.7262.2.4.7.4.3.1 Table

hzQtmIFAlarmsEntry .1 hzQtmIFAlarmsIndex .1.1 hzQtmIFLostLockAlarm .1.2 hzQtmIFLostLockCounts .1.3

hzQtmTrapConfig 1.3.6.1.4.1.7262.2.4.8

hzQtmSnmpTrapHostTable 1.3.6.1.4.1.7262.2.4.8.1 Table

hzQtmSnmpTrapHostEntry .1 hzQtmSnmpTrapHostIndex .1.1 hzQtmSnmpTrapHostMode .1.2 hzQtmSnmpTrapHostIpAddress .1.3 hzQtmSnmpTrapHostCommunityName .1.4 hzQtmSnmpTrapHostActivated .1.5

hzQtmSnmpV3TrapHostsTable Table containing snmp V3 trap host entries

1.3.6.1.4.1.7262.2.4.8.2 Table

hzQtmSnmpV3TrapHostsEntry .1 hzQtmSnmpV3TrapHostsIndex .1.1 snmpV3TrapHostIpAddress .1.2 snmpV3TrapHostUserName .1.3 snmpV3TrapHostAuthProtocol .1.4 snmpV3TrapHostAuthPassword .1.5 snmpV3TrapHostPrivProtocol .1.6 snmpV3TrapHostPrivPassword .1.7 snmpV3TrapHostActivated .1.8

hzQtmTrapEnable 1.3.6.1.4.1.7262.2.4.8.3 hzQtmColdStartTrap 1.3.6.1.4.1.7262.2.4.8.3.1 r/w Integer Specifies whether this trap is to be sent or not. hzQtmLinkDownTrap 1.3.6.1.4.1.7262.2.4.8.3.2 r/w Integer Specifies whether this trap is to be sent or not. hzQtmLinkUpTrap 1.3.6.1.4.1.7262.2.4.8.3.3 r/w Integer Specifies whether this trap is to be sent or not. hzQtmExplicitiAuthenticationFailureTrap 1.3.6.1.4.1.7262.2.4.8.3.4 r/w Integer Specifies whether this trap is to be sent or not.


- 30 -


hzQtmHitlessAamConfigMismatchTrap 1.3.6.1.4.1.7262.2.4.8.3.5 r/w Integer Enables or disables the Hitless Aam ConfigMismatch trap. hzQtmHitlessAamActiveTrap 1.3.6.1.4.1.7262.2.4.8.3.6 r/w Integer Enables or disables the Hitless AAM Active trap. hzQtmAtpcConfigMismatchTrap 1.3.6.1.4.1.7262.2.4.8.3.7 r/w Integer Enables or disables the trap. hzQtmSntpServersUnreachableTrap 1.3.6.1.4.1.7262.2.4.8.3.8 r/w Integer Enables or disables the trap. hzQtmFrequencyFileInvalidTrap 1.3.6.1.4.1.7262.2.4.8.3.9 r/w Integer Enables or disables the trap. hzQtmEnetPortDroppedFramesThresholdExceedTrap 1.3.6.1.4.1.7262.2.4.8.3.10 r/w Integer Enables or disables the trap. hzQtmEnetPortBandwidthUtilizationThresholdExceedTrap 1.3.6.1.4.1.7262.2.4.8.3.11 r/w Integer Enables or disables the trap. hzQtmEnetPortRlsMismatchTrap 1.3.6.1.4.1.7262.2.4.8.3.12 r/w Integer Enables or disables the trap. hzQtmRlsQueueBasedShutdownActivatedTrap 1.3.6.1.4.1.7262.2.4.8.3.13 r/w Integer Enables or disables the Queue-Based RLS Shutdown trap. hzQtmModemRxLossOfSignalLockTrap 1.3.6.1.4.1.7262.2.4.8.3.14 r/w Integer Specifies whether this trap is to be sent or not. hzQtmModemTxLossOfSyncTrap 1.3.6.1.4.1.7262.2.4.8.3.15 r/w Integer Specifies whether this trap is to be sent or not. hzQtmModemSnrBelowThresholdTrap 1.3.6.1.4.1.7262.2.4.8.3.16 r/w Integer Specifies whether this trap is to be sent or not. hzQtmModemEqualizerStressExceededThresholdTrap 1.3.6.1.4.1.7262.2.4.8.3.17 r/w Integer Specifies whether this trap is to be sent or not. hzQtmModemChannelizedRslBelowThresholdTrap 1.3.6.1.4.1.7262.2.4.8.3.18 r/w Integer Enables or disables the trap. hzQtmFpgaProgrammingErrorTrap 1.3.6.1.4.1.7262.2.4.8.3.19 r/w Integer Specifies whether this trap is to be sent or not. hzQtmUserManagementSessionCommencedTrap 1.3.6.1.4.1.7262.2.4.8.3.20 r/w Integer Specifies whether this trap is to be sent or not. hzQtmUserManagementSessionTerminatedTrap 1.3.6.1.4.1.7262.2.4.8.3.21 r/w Integer Specifies whether this trap is to be sent or not. hzQtmAtpcTxAtMaxPwrTrap 1.3.6.1.4.1.7262.2.4.8.3.22 r/w Integer Specifies whether this trap is to be sent or not. hzQtmRadioSynthLostLockTrap 1.3.6.1.4.1.7262.2.4.8.3.23 r/w Integer Specifies whether this trap is to be sent or not. hzQtmRadioLostCommunicationTrap 1.3.6.1.4.1.7262.2.4.8.3.24 r/w Integer Specifies whether this trap is to be sent or not. hzQtmRadioMismatchTrap 1.3.6.1.4.1.7262.2.4.8.3.25 r/w Integer Specifies whether this trap is to be sent or not. hzQtmRadioPowerAmpTrap 1.3.6.1.4.1.7262.2.4.8.3.26 r/w Integer Specifies whether this trap is to be sent or not. hzQtmRadioExcessiveTxCableLossTrap 1.3.6.1.4.1.7262.2.4.8.3.27 r/w Integer Specifies whether this trap is to be sent or not. hzQtmHiPowerRadioTxDetectorTrap 1.3.6.1.4.1.7262.2.4.8.3.28 r/w Integer Specifies whether this trap is to be sent or not. hzQtmSecondaryRadioIsActiveTrap 1.3.6.1.4.1.7262.2.4.8.3.29 r/w Integer Specifies whether this trap is to be sent or not. hzQtmRedundancySerialNumberMisMatchTrap 1.3.6.1.4.1.7262.2.4.8.3.30 r/w Integer Specifies whether this trap is to be sent or not. hzQtmRadioFirmwareMismatchTrap 1.3.6.1.4.1.7262.2.4.8.3.31 r/w Integer Specifies whether this trap is to be sent or not. hzQtmSecondaryRadioNotdetectedTrap 1.3.6.1.4.1.7262.2.4.8.3.32 r/w Integer Specifies whether this trap is to be sent or not. hzQtmPrimaryRadioNotdetectedTrap 1.3.6.1.4.1.7262.2.4.8.3.33 r/w Integer Specifies whether this trap is to be sent or not. hzQtmFaultyPrimaryRadioTrap 1.3.6.1.4.1.7262.2.4.8.3.34 r/w Integer Specifies whether this trap is to be sent or not. hzQtmRadioExcessiveTxCableLossChangeTrap 1.3.6.1.4.1.7262.2.4.8.3.35 r/w Integer Specifies whether this trap is to be sent or not. hzQtmRadioExcessiveRxCableLossTrap 1.3.6.1.4.1.7262.2.4.8.3.36 r/w Integer Specifies whether this trap is to be sent or not. hzQtmRedundancyPrimaryPortNotSetTrap 1.3.6.1.4.1.7262.2.4.8.3.37 r/w Integer Specifies whether this trap is to be sent or not.


- 31 -


hzQtmRedundancySecondaryPortIsActiveTrap 1.3.6.1.4.1.7262.2.4.8.3.38 r/w Integer Specifies whether this trap is to be sent or not. hzQtmRedundancyPrimaryPortFaultyTrap 1.3.6.1.4.1.7262.2.4.8.3.39 r/w Integer Specifies whether this trap is to be sent or not. hzQtmRedundancySecondaryPortFaultyTrap 1.3.6.1.4.1.7262.2.4.8.3.40 r/w Integer Specifies whether this trap is to be sent or not. hzQtmFanFailedTrap 1.3.6.1.4.1.7262.2.4.8.3.41 r/w Integer Specifies whether this trap is to be sent or not. hzQtmModemRlsShutdownActivatedTrap 1.3.6.1.4.1.7262.2.4.8.3.42 r/w Integer Enables or disables the RLS Shutdown trap. hzQtmRadioUnitHwChangedTrap 1.3.6.1.4.1.7262.2.4.8.3.43 r/w Integer Enables or disables the Radio Unit Hardware changed trap. hzQtmRadioSwDownloadFailedTrap 1.3.6.1.4.1.7262.2.4.8.3.44 r/w Integer Enables or disables the Radio software download failure trap. hzQtmRadioRestartedOKTrap 1.3.6.1.4.1.7262.2.4.8.3.45 r/w Integer Enables or disables the Radio restarted OK trap. hzQtmMibChangeNotSavedTrap 1.3.6.1.4.1.7262.2.4.8.3.46 r/w Integer Enables or disables the 'Mib changed not saved' trap. hzQtmRadioDrainCurrentTrap 1.3.6.1.4.1.7262.2.4.8.3.47 r/w Integer Enables or disables the Radio Drain Current trap. hzQtmIFLostLockTrap 1.3.6.1.4.1.7262.2.4.8.3.48 r/w Integer Enables or disables the 'IF Synthesizer Lost Lock' trap. hzQtmInvalidSystemConfigurationTrap 1.3.6.1.4.1.7262.2.4.8.3.49 r/w Integer Enables or disables the Invalid System Configuration trap. hzQtmHitlessAamEventTrap 1.3.6.1.4.1.7262.2.4.8.3.50 r/w Integer Enables or disables the Hitless AAM Event trap. hzQtmModemXPICEqualizerStressExceedThresholdTrap 1.3.6.1.4.1.7262.2.4.8.3.51 r/w Integer Specifies whether this trap is to be sent or not. hzQtmPartnerNodeAlarmTrap 1.3.6.1.4.1.7262.2.4.8.3.52 r/w Integer Enables or disables the Partner node trap. hzQtmBandwidthDoublingInvalidLinkConfigTrap 1.3.6.1.4.1.7262.2.4.8.3.53 r/w Integer Enables or disables the bandwidth doubling invalid link configuration trap hzQtmBandwidthDoublingWrongPortConnectedTrap 1.3.6.1.4.1.7262.2.4.8.3.54 r/w Integer Enables or disables the bandwidth doubling wrong link connected trap hzQtmRadioPowerOffTrap 1.3.6.1.4.1.7262.2.4.8.3.55 r/w Integer Specifies whether this trap is to be sent or not. hzQtmSynceLostLockTrap 1.3.6.1.4.1.7262.2.4.8.3.56 r/w Integer hzQtmSynceSecondarySourceInUseTrap 1.3.6.1.4.1.7262.2.4.8.3.57 r/w Integer hzQtmSnmp 1.3.6.1.4.1.7262.2.4.9

hzQtmSnmpUserAccess 1.3.6.1.4.1.7262.2.4.9.1 r/o Integer

Specifies the user access to the system. If access is set to 'explicitManagers' then only managers with ip addresses set in snmpManagersTable will be able to gain SNMP access to the system. If access is set to 'any' then any manager will be able to gain SNMP access to the system

hzQtmSnmpManagerAnyCommunityName 1.3.6.1.4.1.7262.2.4.9.2 r/o String The community string name used by the 'any' manager. hzQtmSnmpSetRequests 1.3.6.1.4.1.7262.2.4.9.3 r/o Integer Indicates whether SNMP SET requests are allowed.

hzQtmSnmpManagersTable Table containing snmp manager entries

1.3.6.1.4.1.7262.2.4.9.4 Table

hzQtmSnmpManagersEntry .1 hzQtmSnmpManagersIndex .1.1 hzQtmSnmpManagerIpAddress .1.2 hzQtmSnmpManagerCommunityName .1.3 hzQtmSnmpManagerActivated .1.4

hzQtmSnmpV3ManagersTable 1.3.6.1.4.1.7262.2.4.9.5 Table hzQtmSnmpV3ManagersEntry .1


- 32 -


Table containing snmp V3 manager entries

hzQtmSnmpV3ManagersIndex .1.1 hzQtmSnmpV3ManagerUserName .1.2 hzQtmSnmpV3ManagerAuthProtocol .1.3 hzQtmSnmpV3ManagerAuthPassword .1.4 hzQtmSnmpV3ManagerPrivProtocol .1.5 hzQtmSnmpV3ManagerPrivPassword .1.6 hzQtmSnmpV3ManagerActivated .1.7

hzQtmManagementSessions 1.3.6.1.4.1.7262.2.4.10

hzQtmUserSessionUserTable 1.3.6.1.4.1.7262.2.4.10.1 Table

hzQtmUserSessionUserEntry .1 hzQtmUserSessionUserIndex .1.1 hzQtmUserSessionUserName .1.2 hzQtmUserSessionUserConnectionType .1.3 hzQtmUserSessionUserState .1.4

hzQtmHttp 1.3.6.1.4.1.7262.2.4.11 hzQtmHttpEnable 1.3.6.1.4.1.7262.2.4.11.1 r/w Integer Indicates whether HTTP is enabled. Disabled = 1, enabled = 2 hzQtmHttpSecure 1.3.6.1.4.1.7262.2.4.11.2 hzQtmHttpSecureCertificateStatus 1.3.6.1.4.1.7262.2.4.11.2.1 r/o String Returns the HTTPS certificate status hzQtmHttpSecureAccessForAdminUsers 1.3.6.1.4.1.7262.2.4.11.2.2 r/w Integer the HTTPS access requirement for Admin user group. Off = 1, on = 2 hzQtmHttpSecureAccessForNocUsers 1.3.6.1.4.1.7262.2.4.11.2.3 r/w Integer the HTTPS access requirement for Noc user group. Off = 1, on = 2 hzQtmHttpSecureAccessForSuperUsers 1.3.6.1.4.1.7262.2.4.11.2.4 r/w Integer the HTTPS access requirement for Super user group. Off = 1, on = 2 hzQtmQos 1.3.6.1.4.1.7262.2.4.12 hzQtmQosEnable 1.3.6.1.4.1.7262.2.4.12.1 r/w Integer Indicates whether QOS is enabled.

hzQtmCosType 1.3.6.1.4.1.7262.2.4.12.2 r/w Integer Indicates the class of service tag type. Based on the setting Horizon will use the CoS value in the VLAN tag, or Q-in-Q inner VLAN tag, or Q-in-Q outer VLAN tag.

hzQtmCoSQinQiTag 1.3.6.1.4.1.7262.2.4.12.3 r/w String Sets the value of the Q-in-Q inner tag. This tag is also used to classify the non-Q-in-Q VLAN. Default value is 0x8100.

hzQtmCoSQinQoTag 1.3.6.1.4.1.7262.2.4.12.4 r/w String Sets the value of the Q-in-Q outer VLAN tag. Default value is 0x8100.

hzQtmCosQueueMapping 1.3.6.1.4.1.7262.2.4.12.5 r/w String

User queue assignments for CoS values 0 to 7. There are 4 CoS queues. Their corresponding queue numbers are 1,2, 3, where 1 is the lowest priority queue and 4 is the highest priority queue. CoS to queue mapping example:1 1 2 2 3 3 4 4.


- 33 -


hzQtmCosExpediteQueue 1.3.6.1.4.1.7262.2.4.12.6 r/w Integer

This sets the user queue operation mode. (a) In expedite mode, any Queue can be assigned 100% of CIR. Queue 4 is serviced first and queue 1 is serviced last.(b) In non expedite mode, the sum of all CIRs must be equal to 100%. In this mode higher priority queues will be serviced first until that queue is emptied or the defined CIR is reached.

hzQtmCosQueueCIR 1.3.6.1.4.1.7262.2.4.12.7 r/w String

Committed Information Rate (CIR) assignments for CoS queues 1 to 4. CIR is assigned as the percentage of system current speed. When expedite queue is enabled any queue can be assigned 100% bandwidth. When expedite queue is disabled the sum of CIR of all queues should be 100.

hzQtmCosQueueCBS 1.3.6.1.4.1.7262.2.4.12.8 r/w String Committed Burst Size (CBS) for CoS queues 1 to 4. CBS is the percentage of total packet buffer size. The sum of CBS's of all 4 queues must be equal to 100. Minimum CBS assignable to any queue is 1.

hzQtmCosDefaultValue 1.3.6.1.4.1.7262.2.4.12.9 r/w Integer Default CoS value assigned to the Ethernet frames that don't have VLAN or Q-in-Q tag.

hzQtmQosPolicy 1.3.6.1.4.1.7262.2.4.12.10 r/w Integer Sets the QoS policy.

hzQtmCosWfqWeight 1.3.6.1.4.1.7262.2.4.12.11 r/w String

The weight assigned to each of the 4 cos queue. The wireless bandwidth is distributed amongst the queues proportional to their weight. The weights have values from 0-15, where 0 is the lowest weight and 15 is the highest weight. Setting the Cos weight example:1 2 3 4.

hzQtmCutThroughProcessing 1.3.6.1.4.1.7262.2.4.12.12 r/w Integer This value enables or disables the cut through feature in Quantum hardware. Disabled = 1, enabled = 2

hzQtmCosEcfmFlowMapping 1.3.6.1.4.1.7262.2.4.12.13 r/w Integer

Select a queue to route ECFM frames. The mapping is only active when ECFM is disabled. If QoS is disabled then Q1, Q2 and Q3 cannot be selected. Disabled = 1, q1 = 2, q2 = 3, q3 = 4, q4 = 5,qC = 6

hzQtmCosControlFlowMapping 1.3.6.1.4.1.7262.2.4.12.14 r/w Integer

Select a queue to route slow protocol frames (with destination mac address 0x180C200xxxx). If QoS is disabled then Q1, Q2 and Q3 cannot be selected. Disabled = 1, q1 = 2, q2 = 3, q3 = 4, q4 = 5,qC = 6

hzQtmRapidLinkShutdown 1.3.6.1.4.1.7262.2.4.13

hzQtmRlsEnable 1.3.6.1.4.1.7262.2.4.13.1 r/w Integer The Rapid Link Shutdown feature:enabled or disabled. Changing this option requires a system reset. Disabled = 1, enabled = 2

hzQtmRlsHardFaultMonitor 1.3.6.1.4.1.7262.2.4.13.2 r/w Integer Enable the rlsHardFaultMonitor for rapid detection of severely degrade link. When disabled only the RLS Link Degrade Monitor is used. Off 1, on = 2

hzQtmRlsWirelessPortOption 1.3.6.1.4.1.7262.2.4.13.3 r/w Integer

anyport - If the IDU is operating with two wireless ports and any one of the wireless ports goes down disables the Ethernet port. bothports - In the above condition, this feature disables the Ethernet traffic through the faulty wireless link but continuously send Ethernet traffic through the other good wireless port. If the remaining wireless port also exceeds the error threshold, Ethernet port will be disabled. Anyport = 1, both


- 34 -


ports = 2

hzQtmRlsAutomaticLinkReestablish 1.3.6.1.4.1.7262.2.4.13.4 r/w Integer If this feature is enabled, the link will be automatically reestablished. If this feature is disabled, the user must explicitly use the manualReestablish object to bring the link back up. Disabled = 1, enabled = 2

hzQtmRlsManualLinkReestablish 1.3.6.1.4.1.7262.2.4.13.5 r/w Integer

This object is writeable ONLY if automaticLinkReestablish is set to disabled. The user explicitly brings the link back up by setting this object to enabled. The user explicitly brings the link down by setting this object to disabled. Disabled = 1, enabled = 2

hzQtmWriteRlsMonitorParametersToSystem 1.3.6.1.4.1.7262.2.4.13.6 r/w Integer This writes RLS soft and hard fault monitor parameters to RAM. Reading this object returns '1'.

hzQtmRlsDroppedFramesThresholdOverride 1.3.6.1.4.1.7262.2.4.13.7 r/w Integer If the Ethernet is down due to Queue-Based Rls shutdown, this will bring the ethernet back and obey the queue settings. Reading this object returns '1'.

hzQtmRlsDroppedFramesThresholdTable A table of RLS Queue Monitor Parameters

1.3.6.1.4.1.7262.2.4.13.8 Table

hzQtmRlsDroppedFramesThresholdEntry .1 hzQtmRlsDroppedFramesThresholdIndex .1.1 hzQtmRlsAllowedDroppedFrameRateValue .1.2 hzQtmRlsDroppedFrameMonitorPeriod .1.3

hzQtmRlsSoftFaultMonitorTable A table of RLS Soft Fault Monitor Parameters.

1.3.6.1.4.1.7262.2.4.13.9 Table

hzQtmRlsSoftFaultMonitorEntry .1 hzQtmRlsSoftFaultMonitorIndex .1.1 hzQtmRlsEstablishErredFrameThreshold See Note 2 below. .1.2 hzQtmRlsShutdownErredFrameThreshold See Note 2 below. .1.3 hzQtmRlsEstablishNumberOfSamples See Note 2 below. .1.4 hzQtmRlsShutdownNumberOfSamples See Note 2 below. .1.5 hzQtmRlsEstablishSamplePeriod See Note 2 below. .1.6 hzQtmRlsShutdownSamplePeriod See Note 2 below. .1.7 hzQtmRlsQuickShutdownSamplePeriod See Note 2 below. .1.8

hzQtmHardFaultMonitorTable A table of RLS Hard Fault Monitor Parameters.

1.3.6.1.4.1.7262.2.4.13.10 Table

hzQtmHardFaultMonitorEntry .1 hzQtmHardFaultMonitorIndex .1.1 hzQtmRlsHardFaultSamplePeriod See Note 2 below. .1.2 hzQtmRlsHardFaultThreshold See Note 2 below. .1.3

hzQtmRlsReceiveSignalLevelMonitorTable A table of RLS RSL Monitor Parameters

1.3.6.1.4.1.7262.2.4.13.11 Table

hzQtmRlsReceiveSignalLevelMonitorEntry .1 hzQtmRlsReceiveSignalLevelMonitorIndex .1.1 hzQtmRlsMakeRslMonitorRslValue .1.2 hzQtmRlsMakeRslMonitorPeriod .1.3

hzQtmRlsStatus 1.3.6.1.4.1.7262.2.4.13.12 Note 2: This OID requires the following procedure before it will become active: Once this RLS setting has been made, the system requires writing 1 to hzQtmWriteRlsMonitorParametersToSystem for the setting to take effect in hardware. Note that you need only perform this procedure once, after all RLS settings that require this procedure have been made.


- 35 -


hzQtmRlsCurrentDroppedFramesTable A table of RLS Currently Observed Queue Monitor Parameters

1.3.6.1.4.1.7262.2.4.13.12.1 Table

hzQtmRlsCurrentDroppedFramesEntry .1 hzQtmRlsCurrentDroppedFramesIndex .1.1 hzQtmRlsCurrentDroppedFramesRateValue .1.2 hzQtmRlsCurrentDroppedFrameMonitorPeriod .1.3 hzQtmRlsCurrentQueueStatus .1.4

hzQtmRlsStatusTable A table of RLS Parameters and states

1.3.6.1.4.1.7262.2.4.13.12.2 Table

hzQtmRlsStatusEntry .1 hzQtmRlsStatusIndex .1.1 hzQtmRlsOption .1.2 hzQtmRlsState .1.3 hzQtmRlsMismatchState .1.4 hzQtmDegradeMonitorState .1.5 hzQtmHardFaultMonitorState .1.6 hzQtmMakeRslThresholdState .1.7 hzQtmPeerRlsState .1.8 hzQtmRadioInterfaceState .1.9 hzQtmNetworkInterfaceState .1.10 hzQtmUserConfiguredEstablishFer .1.11 hzQtmMinimumAchievableEstablishFer .1.12 hzQtmUserConfiguredShutdownFer .1.13 hzQtmMinimumAchievableShutdownFer .1.14 hzQtmUserConfiguredEstablishMonitorTime .1.15 hzQtmActualEstablishMonitorTime .1.16 hzQtmUserConfiguredShutdownMonitorTime .1.17 hzQtmActualShutdownMonitorTime .1.18

hzQtmRlsPortGroup 1.3.6.1.4.1.7262.2.4.13.13 r/w Integer


- 36 -


hzQtmRlsPort1 1.3.6.1.4.1.7262.2.4.13.13.1 r/w Integer

This is an important configuration!!!! There are three groups GR-A (OR-A), GR-B (OR-B) and GR-C (AND). Any Ethernet port can belong to any one of these three groups.These port groups are mutually exclusive. That means, one port cannot belongs to two or more groups Example: OR-A ={Port1, Port2}, OR-B {Port3,Port5}and AND ={Port4} RLS will not trigger due to local Ethernet port state if 1. Either Port1 or Port2 is up AND 2. Either Port2 or Port5 is up AND 3. Port4 is up. For any reason if RLS triggers, Port1, Port2, Port3, Port4 and Port5 will all be shutdown.

hzQtmRlsPort2 1.3.6.1.4.1.7262.2.4.13.13.2 r/w Integer See description for hzQtmRlsPort1 hzQtmRlsPort3 1.3.6.1.4.1.7262.2.4.13.13.3 r/w Integer See description for hzQtmRlsPort1 hzQtmRlsPort4 1.3.6.1.4.1.7262.2.4.13.13.4 r/w Integer See description for hzQtmRlsPort1 hzQtmRlsPort5 1.3.6.1.4.1.7262.2.4.13.13.5 r/w Integer See description for hzQtmRlsPort1 hzQtmRlsPort6 1.3.6.1.4.1.7262.2.4.13.13.6 r/w Integer See description for hzQtmRlsPort1 hzQtmRlsPort7 1.3.6.1.4.1.7262.2.4.13.13.7 r/w Integer See description for hzQtmRlsPort1 hzQtmRlsPort8 1.3.6.1.4.1.7262.2.4.13.13.8 r/w Integer See description for hzQtmRlsPort1 hzQtmRlsPauseEnable 1.3.6.1.4.1.7262.2.4.13.14 r/w Integer hzQtmSntp 1.3.6.1.4.1.7262.2.4.14 hzQtmSntpEnable 1.3.6.1.4.1.7262.2.4.14.1 r/w Integer Indicates whether SNTP feature is enabled.

hzQtmSntpOffset 1.3.6.1.4.1.7262.2.4.14.2 r/w Integer System time offset from GMT in tenths of hours. For example, an offset of 10 indicates 10 tenths, or 1 hour. An offset of 5 indicates half an hour.

hzQtmSntpServerTable Table containing sntp server entries

1.3.6.1.4.1.7262.2.4.14.3 Table

hzQtmSntpServerEntry .1 hzQtmSntpServerIndex .1.1 hzQtmSntpServerIpAddress .1.2 hzQtmSntpServerStatus .1.3 hzQtmSntpServerStratum .1.4

hzQtmSntpRestoreDefault 1.3.6.1.4.1.7262.2.4.14.4 r/w Integer Restores SNTP servers to default Addresses. hzQtmLogs 1.3.6.1.4.1.7262.2.4.15

hzQtmEventLogEnable 1.3.6.1.4.1.7262.2.4.15.1 r/w Integer Indicates and controls whether the event logging facility is enabled. 1=disabled, 2=enabled

hzQtmPerfmLogEnable 1.3.6.1.4.1.7262.2.4.15.2 r/w Integer Indicates whether performance log is enabled.

hzQtmPerfmLogInterval 1.3.6.1.4.1.7262.2.4.15.3 r/w String Performance statistics are logged periodically by this interval. The interval can be up to 24:00:00 (24 hours) and as short as 00:00:1 (1 seconds).

hzQtmSysLog 1.3.6.1.4.1.7262.2.4.15.4


- 37 -


hzQtmSysLogEnable 1.3.6.1.4.1.7262.2.4.15.4.1 r/w Integer hzQtmSysLogIpAddress 1.3.6.1.4.1.7262.2.4.15.4.2 r/w IP address hzQtmRadius 1.3.6.1.4.1.7262.2.4.16 hzQtmRadiusSuperUserAuthentication 1.3.6.1.4.1.7262.2.4.16.1 r/w Integer The set strict mode on or off. hzQtmRadiusServerTimeOut 1.3.6.1.4.1.7262.2.4.16.2 r/o Integer Timeout period for authentication requests. hzQtmRadiusServerDeadTime 1.3.6.1.4.1.7262.2.4.16.3 r/o Integer Time to declare an unresponsive server 'dead

hzQtmRadiusServerReTransmit 1.3.6.1.4.1.7262.2.4.16.4 r/o Integer

Maximum number of retransmits to an unresponsive server

hzQtmRadiusServerTable Table containing radius server entries

1.3.6.1.4.1.7262.2.4.16.5 Table

hzQtmRadiusServerEntry .1

hzQtmRadiusServerIndex .1.1 hzQtmRadiusCfgdHostIpAddress .1.2 hzQtmRadiusActiveHostIpAddress .1.3

hzQtmSnmpNotifications 1.3.6.1.4.1.7262.2.4.21 See Section 4.2 for a list of SNMP traps


- 38 -

4.2 SNMP Traps Suggested trap severity ratings have been provided. Critical alarms indicate that the link has failed, Major alarms indicate events that will or are affecting link performance, Minor alarms indicate configuration problems or conditions that are transient, and Information alarms are notices of non-traffic or performance affecting events including clearing of any Critical, Major, or Minor traps. All traps sent using SNMP are sent with Enterprise OID .1.3.6.1.4.1.7262.2.4.21 unless otherwise specified, generic and specific values are detailed in the table below. Generic Specific Name Severity Description

0 ColdStart 4 AuthenticationFailure

6 1 hzQtmlinkDown Critical A linkDown trap signifies that the sending protocol entity recognizes a failure in one of the communication links represented in the agent's configuration.

6 2 hzQtmlinkUp Information A linkUp trap signifies that the sending protocol entity recognizes that one of the communication links represented in the agent's configuration has come up.

6 3 hzQtmExplicitAuthenticationFailure Major Authentication of the peer horizon node has failed. The severity is critical, the probable cause is an incorrect authentication configuration on horizon faulty cable between the modem and radio, and recommended course of action is to check both ends of the link.

6 4 hzQtmExplicitAuthenticationFailureCleared Information The condition has cleared. The peer node is now authenticated. 6 5 hzQtmHitlessAamConfigMisMatch Minor Hitless Automatic Adaptive modulation configuration mismatch 6 6 hzQtmHitlessAamConfigMisMatchCleared Information Hitless Automatic Adaptive modulation configuration mismatch cleared. 6 7 hzQtmHitlessAamActive Major Hitless Automatic Adaptive m

Documents

Horizon Quantum SNMP Documentation v1.3!83!000078-01!01!03