Upload
max-haymes
View
290
Download
0
Tags:
Embed Size (px)
DESCRIPTION
INTERNATIONAL GRAPHIC WEBSTER SRL ARMADORA DE REVISTAS HORIZON SPF-200A/FC-200A
Citation preview
100318/SO/SPF200A/06E/TV
510 Kuze Ooyabu-cho, Minami-ku, Kyoto, 601-8206, Japan Phone : +81-(0)75-934-6700, Fax : +81-(0)75-934+6708, www.horizon.co.jp
HORIZON INTERNATIONAL, INC.
OptionEnhance the SPF-200A/FC-200A with Horizon’s unique pXnet bindery control system.
The Horizon pXnet system leverages the power of JDF across the bindery, allowing jobs to flow seamlessly through the entire print production process from MIS, Prepress, Press and Postpress.
pXnet Bindery Control System based on the view of CIP4
JDF (Based on CIP4)
M I S
JMF (Based on CIP4)
JDF (Based on CIP4)
P r e p r e s s P r e s s P o s t p r e s s
J D F JDF (Based on CIP4)
D i g i t a l P r e s s
J D F JDF (Based on CIP4)
J D F J D F
J M F
Control PC
Options
SPF-200A+FC-200A+ST-40+Collator (VAC-100/60H)
SPF-200A+HP-200A+FC-200A+HOF-30+Collator (VAC-100/60H)
SPF-200A+FC-200A+HOF-20
SPF-200A/FC-200A
Es tan fácil de usar.El Nuevo Standard en Terminación.
Functions
Sheet Size
Sheet Weight Range
Booklet Size
Stitch Thickness
Fold Thickness
Stitch Distance
Stitching WireError Detector / Indicator
CounterProduction Speed
Voltage / Frequency
Rated Current
Power Consumption
Heat Output
Motors
Machine DimensionsNoise Level
Machine Weight
Options
Saddle Stitch and Fold only (Option : Top/Side Stitch, Top Stitch and Fold, Rear Corner Stitch, Front Corner Stitch, Pass Through)
Option :
*The range of sheet size available can be limited when the sheets are fed from VAC/HOF.VAC-100/60H : Max. 350(W) x 500(L) mm (13.775” x 19.685”) Min. 120(W) x 148(L) mm (4.725” x 5.830”)
HOF-20/30 : Max. 350(W) x 500(L) mm (13.775” x 19.685”) Min. 200(W) x 275(L) mm (7.875” x 10.830”)Normal Paper : 64 to 157 gsm, Art Coated Paper : 85 to 157 gsm
Option :
Max. 4 mm (About 48 sheets of Normal Paper 64 gsm) only for Top/Side Stitch and Corner StitchMax. 2 mm (About 24 sheets of Normal Paper 64 gsm) (About 16 sheets of Normal Paper 82 gsm)73 to 290 mm (2.875” x 11.400”) AdjustableIn saddle stitching, the stitch position can be limited by the fold knife.Optional stitching head is available for four stitches.Standard : No.26 (0.5 mm), Option : No.28 (0.4 mm)Jam Detection, Wire Feeding Detection, Jog Error Detection, Option : Stitch DetectionTotal Booklet Count, Batch CountMax. 4,000 booklets/hr. (A4-Finish), Max. 4,500 booklets/hr. (A5-Finish)Single Phase 200 / 220 / 230 / 240 V, 50 / 60 Hz
SPF Main Body : 2,830 kJ (680 kcal)Delivery Conveyor (SC-200 / LC-200) : 10 kJ (4 kcal)SPF Main Body : 400 W x 1, 200 W x 1, 25 W x 1Delivery Conveyor (SC-200 / LC-200) : 15 W x 12,765(W) x 810(D) x 1,250(H) mm (108.9” x 31.9” x 49.3”) (with IFU-200 and SC-200)LA peak : 82.0 dB, LAeq : 77.9 dBSPF-200A+SSK-200 : 468 kg (SPF Accessory 14 kg), IFU-200 : 22 kg, SC-200 : 20 kgSide/Corner Stitch Kit : SSK-200, Paper Insertion Knife Unit : PN-200, Stitch Detector : SDS-200, Four Stitching Unit : FST-200, Short Conveyor : SC-200, Long Conveyor : LC-200
Booklet Size (Before Trim)
Booklet Size (After Trim)
Trimming WidthTrimming ThicknessProduction Speed
Error Detector / Indicator
CounterOther Function
Heat OutputMotors
Machine DimensionsMachine Weight
Options
Max. 356(W) x 254(L) mm (14.000” x 10.000”)Min. 120(W) x 90(L) mm (4.725” x 3.545”)Max. 356(W) x 250(L) mm (14.000” x 9.840”)Min. 120(W) x 85(L) mm (4.725” x 3.350”)Max. 20 mm (0.785”)Max. 4 mm (0.157”)Max. 4,000 booklets/hr. (A4-Finish), Max. 4,500 booklets/hr. (A5-Finish)Jam Detection, Trim Full Detection, Faulty Set Ejection Tray Jam Detection, Option : Booklet Thickness DetectionFore-edge Trimming CounterFaulty Set Ejection1,360 kJ (330 kcal)400 W x 1, 90 W x 1, 60 W x 11,335(W) x 810(D) x 1,070(H) mm (52.6” x 31.9” x 42.2”) (with Short Conveyor SC-200)244 kg (FC Accessory 14 kg)Chip Extractor : TB-200, Booklet Thickness Detector : TD-200, Preset Kicker : PK-30
The SPF-200A/FC-200A bookletmaker features high productivity,quick fully-automatic changeover and user-friendly operation.
Infeeder Unit : IFU-200Side/Corner Stitch Kit : SSK-200Short Conveyor : SC-200Long Conveyor : LC-200Stitch Detector : SDS-200Four Stitching Unit : FST-200Preset Kicker : PK-30
Booklet Thickness Detector : TD-200Paper Insertion Knife Unit : PN-200Loop Stitch Kit (Part No. 9964401)*Required for each stitcher head.
Chip Extractor : TB-200Press Stacker : PST-40Mobile Knife Fold Unit : MKU-54
Selection
FC-200A+HP-200A+SPF-200A+ST-40+VAC-100a+VAC-100c+PJ-77R
Advanced AutomationAll necessary settings can be performed automatically through the touchscreen display. Even the fold roller gap adjustment is automated.
Non-stop OperationA reject function allows non-stop operation. Errored booklets are rejected into the built-in reject tray so only good booklets are delivered to the conveyor.
Color TouchscreenThe 10.4 inch large color touchscreen features intuitive, icon-based operation for easy operation and quick troubleshooting.
High Speed ProductionMaximum production speed is 4,500 books per hour with A5 booklets.
Quality ControlThe wire feeding sensor and jog sensor are equipped to maximize productivity and efficiency. Optional mis-stitch detector and thickness detector are available for higher quality control.
JDF WorkflowSystem can be enhanced with JDF workflow from upstream to the postpress using pXnet bindery control system.
Features
SPF-200A Major Specifications Machine Dimensions Unit : mm (inch)
System Configuration
*The machine design and specifications are subject to change without any notice.
FC-200A Major Specifications
Max. 356(W) x 508(L) mm (14.000” x 20.000”)Min. 120(W) x 180(L) mm (4.725” x 7.090”)
Max. 356(W) x 432(L) mm (14.000” x 17.000”)Min. 180(W) x 138(L) mm (7.090” x 5.435”)Max. 356(W) x 432(L) mm (14.000” x 17.000”)Min. 180(W) x 180(L) mm (7.090” x 7.090”)Max. 326(W) x 364(L) mm (12.820” x 14.330”)Min. 210(W) x 210(L) mm (8.270” x 8.270”)Max. 356(W) x 508(L) mm (14.000” x 20.000”)Min. 120(W) x 180(L) mm (4.725” x 7.090”)
Saddle Stitchand Fold only
Top/Side Stitch
Top Stitch and Fold
Corner Stitch
Pass Through
Saddle Stitchand Fold only
Top Stitch and Fold
SPF-200A+FC-200A
SPF-200A Only
SPF-200A+FC-200A
SPF-200A Only
Max. 356(W) x 254(L) mm (14.000” x 10.000”)With Trimming : Max. 356(W) x 250(L) mm (14.000” x 9.840”)Min. 120(W) x 90(L) mm (4.725” x 3.545”)With Trimming : Min. 120(W) x 85(L) mm (4.725” x 3.350”)
Max. 356(W) x 254(L) mm (14.000” x 10.000”)Min. 180(W) x 90(L) mm (7.090” x 3.545”)
200 V, 50 Hz, 6.6 A / 60 Hz, 6.4 A 220 V, 50 Hz, 6.4 A / 60 Hz, 5.9 A230 V, 50 Hz, 5.3 A / 60 Hz, 5.1 A 240 V, 50 Hz, 5.1 A / 60 Hz, 4.8 A200 V, 50 Hz, 4.4 A / 60 Hz, 4.2 A 220 V, 50 Hz, 4.3 A / 60 Hz, 4.0 A230 V, 50 Hz, 3.4 A / 60 Hz, 3.2 A 240 V, 50 Hz, 3.1 A / 60 Hz, 3.0 A200 V, 50 Hz, 1,020 W / 60 Hz, 1,060 W 220 V, 50 / 60 Hz, 1,050 W230 V, 50 / 60 Hz, 1,040 W 240 V, 50 Hz, 1,050 W / 60 Hz, 1,030 W200 V, 50 / 60 Hz, 650 W 220 V, 50 / 60 Hz, 680 W230 V, 50 Hz, 680 W / 60 Hz, 660 W 240 V, 50 / 60 Hz, 640 W
650 (25.6”) 955
(37.6”)
810 (31.9”)670 (26.4”)
1,210 (47.7”) 1,295 (51.0”)2,280 (89.8”)
810(31.9”)
LC-200
SC-200 FC-200A : Height 1,070 (42.2”)
VAC Collator
ST-40 : Height 1,027 (40.5”)
SPF-200A : Height 1,250 (49.3”)
650 (25.6”) 955
(37.6”)
810 (31.9”)670 (26.4”) 1,470 (57.9”)2,780 (109.5”)
810(31.9”)
SC-200
FC-200A : Height 1,070 (42.2”)
HP-200A : Height 1,035 (40.8”)
VAC Collator
HOF-30 : Height 945 (37.3”)
SPF-200A : Height 1,250 (49.3”)
630 (24.9”)
670 (26.4”) 1,700 (67.0”)2,280 (89.8”)
810(31.9”)
SC-200
FC-200A : Height 1,070 (42.2”)
HOF-20 : Height 945 (37.3”)SPF-200A : Height 1,250 (49.3”)
ST-CV
500
ST-40
CCRCCR-DX
ST-CV
SA-40
FC-200A HP-200A
BC-20
CollatorVAC-100VAC-60H
SC-200
IFU-200
SPF-200A
SSK-200
MKU-54
HOF-30
HOF-20
LC-200
PST-40
Bookletmaker SP F-200A/F C-200ABookletmaker SP F-200A/F C-200A Armadora de Revistas SPF-200A/FC-200A
100318/SO/SPF200A/06E/TV
510 Kuze Ooyabu-cho, Minami-ku, Kyoto, 601-8206, Japan Phone : +81-(0)75-934-6700, Fax : +81-(0)75-934+6708, www.horizon.co.jp
HORIZON INTERNATIONAL, INC.
OpciónConecte el SPF-200A/FC-200A al sistema Horizon pXnet de control de terminación.
pXnet Bindery Control System based on the view of CIP4
JDF (Based on CIP4)
M I S
JMF (Based on CIP4)
JDF (Based on CIP4)
P r e p r e s s P r e s s P o s t p r e s s
J D F JDF (Based on CIP4)
D i g i t a l P r e s s
J D F JDF (Based on CIP4)
J D F J D F
J M F
Control PC
Options
SPF-200A+FC-200A+ST-40+Collator (VAC-100/60H)
SPF-200A+HP-200A+FC-200A+HOF-30+Collator (VAC-100/60H)
SPF-200A+FC-200A+HOF-20
SPF-200A/FC-200A
It’s so easy to use.The New Standard for Bookletmaking.
Functions
Sheet Size
Sheet Weight Range
Booklet Size
Stitch Thickness
Fold Thickness
Stitch Distance
Stitching WireError Detector / Indicator
CounterProduction Speed
Voltage / Frequency
Rated Current
Power Consumption
Heat Output
Motors
Machine DimensionsNoise Level
Machine Weight
Options
Saddle Stitch and Fold only (Option : Top/Side Stitch, Top Stitch and Fold, Rear Corner Stitch, Front Corner Stitch, Pass Through)
Option :
*The range of sheet size available can be limited when the sheets are fed from VAC/HOF.VAC-100/60H : Max. 350(W) x 500(L) mm (13.775” x 19.685”) Min. 120(W) x 148(L) mm (4.725” x 5.830”)
HOF-20/30 : Max. 350(W) x 500(L) mm (13.775” x 19.685”) Min. 200(W) x 275(L) mm (7.875” x 10.830”)Normal Paper : 64 to 157 gsm, Art Coated Paper : 85 to 157 gsm
Option :
Max. 4 mm (About 48 sheets of Normal Paper 64 gsm) only for Top/Side Stitch and Corner StitchMax. 2 mm (About 24 sheets of Normal Paper 64 gsm) (About 16 sheets of Normal Paper 82 gsm)73 to 290 mm (2.875” x 11.400”) AdjustableIn saddle stitching, the stitch position can be limited by the fold knife.Optional stitching head is available for four stitches.Standard : No.26 (0.5 mm), Option : No.28 (0.4 mm)Jam Detection, Wire Feeding Detection, Jog Error Detection, Option : Stitch DetectionTotal Booklet Count, Batch CountMax. 4,000 booklets/hr. (A4-Finish), Max. 4,500 booklets/hr. (A5-Finish)Single Phase 200 / 220 / 230 / 240 V, 50 / 60 Hz
SPF Main Body : 2,830 kJ (680 kcal)Delivery Conveyor (SC-200 / LC-200) : 10 kJ (4 kcal)SPF Main Body : 400 W x 1, 200 W x 1, 25 W x 1Delivery Conveyor (SC-200 / LC-200) : 15 W x 12,765(W) x 810(D) x 1,250(H) mm (108.9” x 31.9” x 49.3”) (with IFU-200 and SC-200)LA peak : 82.0 dB, LAeq : 77.9 dBSPF-200A+SSK-200 : 468 kg (SPF Accessory 14 kg), IFU-200 : 22 kg, SC-200 : 20 kgSide/Corner Stitch Kit : SSK-200, Paper Insertion Knife Unit : PN-200, Stitch Detector : SDS-200, Four Stitching Unit : FST-200, Short Conveyor : SC-200, Long Conveyor : LC-200
Booklet Size (Before Trim)
Booklet Size (After Trim)
Trimming WidthTrimming ThicknessProduction Speed
Error Detector / Indicator
CounterOther Function
Heat OutputMotors
Machine DimensionsMachine Weight
Options
Max. 356(W) x 254(L) mm (14.000” x 10.000”)Min. 120(W) x 90(L) mm (4.725” x 3.545”)Max. 356(W) x 250(L) mm (14.000” x 9.840”)Min. 120(W) x 85(L) mm (4.725” x 3.350”)Max. 20 mm (0.785”)Max. 4 mm (0.157”)Max. 4,000 booklets/hr. (A4-Finish), Max. 4,500 booklets/hr. (A5-Finish)Jam Detection, Trim Full Detection, Faulty Set Ejection Tray Jam Detection, Option : Booklet Thickness DetectionFore-edge Trimming CounterFaulty Set Ejection1,360 kJ (330 kcal)400 W x 1, 90 W x 1, 60 W x 11,335(W) x 810(D) x 1,070(H) mm (52.6” x 31.9” x 42.2”) (with Short Conveyor SC-200)244 kg (FC Accessory 14 kg)Chip Extractor : TB-200, Booklet Thickness Detector : TD-200, Preset Kicker : PK-30
El sistema SPF-200A/FC-200A ofrece alta productividad, rápidoquick fully-automatic changeover and user-friendly operation.
Infeeder Unit : IFU-200Side/Corner Stitch Kit : SSK-200Short Conveyor : SC-200Long Conveyor : LC-200Stitch Detector : SDS-200Four Stitching Unit : FST-200Preset Kicker : PK-30
Booklet Thickness Detector : TD-200Paper Insertion Knife Unit : PN-200Loop Stitch Kit (Part No. 9964401)*Required for each stitcher head.
Chip Extractor : TB-200Press Stacker : PST-40Mobile Knife Fold Unit : MKU-54
Selection
FC-200A+HP-200A+SPF-200A+ST-40+VAC-100a+VAC-100c+PJ-77R
Automatización Avanzada
Operación Non-stop
Touchscreen Color
Producción a Alta VelocidadSu velocidad máxima de producción es de 4,500 juegos/hora en formato A5.
Control de Calidad
JDF Workflow
Características
SPF-200A Major Specifications Machine Dimensions Unit : mm (inch)
System Configuration
*The machine design and specifications are subject to change without any notice.
FC-200A Major Specifications
Max. 356(W) x 508(L) mm (14.000” x 20.000”)Min. 120(W) x 180(L) mm (4.725” x 7.090”)
Max. 356(W) x 432(L) mm (14.000” x 17.000”)Min. 180(W) x 138(L) mm (7.090” x 5.435”)Max. 356(W) x 432(L) mm (14.000” x 17.000”)Min. 180(W) x 180(L) mm (7.090” x 7.090”)Max. 326(W) x 364(L) mm (12.820” x 14.330”)Min. 210(W) x 210(L) mm (8.270” x 8.270”)Max. 356(W) x 508(L) mm (14.000” x 20.000”)Min. 120(W) x 180(L) mm (4.725” x 7.090”)
Saddle Stitchand Fold only
Top/Side Stitch
Top Stitch and Fold
Corner Stitch
Pass Through
Saddle Stitchand Fold only
Top Stitch and Fold
SPF-200A+FC-200A
SPF-200A Only
SPF-200A+FC-200A
SPF-200A Only
Max. 356(W) x 254(L) mm (14.000” x 10.000”)With Trimming : Max. 356(W) x 250(L) mm (14.000” x 9.840”)Min. 120(W) x 90(L) mm (4.725” x 3.545”)With Trimming : Min. 120(W) x 85(L) mm (4.725” x 3.350”)
Max. 356(W) x 254(L) mm (14.000” x 10.000”)Min. 180(W) x 90(L) mm (7.090” x 3.545”)
200 V, 50 Hz, 6.6 A / 60 Hz, 6.4 A 220 V, 50 Hz, 6.4 A / 60 Hz, 5.9 A230 V, 50 Hz, 5.3 A / 60 Hz, 5.1 A 240 V, 50 Hz, 5.1 A / 60 Hz, 4.8 A200 V, 50 Hz, 4.4 A / 60 Hz, 4.2 A 220 V, 50 Hz, 4.3 A / 60 Hz, 4.0 A230 V, 50 Hz, 3.4 A / 60 Hz, 3.2 A 240 V, 50 Hz, 3.1 A / 60 Hz, 3.0 A200 V, 50 Hz, 1,020 W / 60 Hz, 1,060 W 220 V, 50 / 60 Hz, 1,050 W230 V, 50 / 60 Hz, 1,040 W 240 V, 50 Hz, 1,050 W / 60 Hz, 1,030 W200 V, 50 / 60 Hz, 650 W 220 V, 50 / 60 Hz, 680 W230 V, 50 Hz, 680 W / 60 Hz, 660 W 240 V, 50 / 60 Hz, 640 W
650 (25.6”) 955
(37.6”)
810 (31.9”)670 (26.4”)
1,210 (47.7”) 1,295 (51.0”)2,280 (89.8”)
810(31.9”)
LC-200
SC-200 FC-200A : Height 1,070 (42.2”)
VAC Collator
ST-40 : Height 1,027 (40.5”)
SPF-200A : Height 1,250 (49.3”)
650 (25.6”) 955
(37.6”)
810 (31.9”)670 (26.4”) 1,470 (57.9”)2,780 (109.5”)
810(31.9”)
SC-200
FC-200A : Height 1,070 (42.2”)
HP-200A : Height 1,035 (40.8”)
VAC Collator
HOF-30 : Height 945 (37.3”)
SPF-200A : Height 1,250 (49.3”)
630 (24.9”)
670 (26.4”) 1,700 (67.0”)2,280 (89.8”)
810(31.9”)
SC-200
FC-200A : Height 1,070 (42.2”)
HOF-20 : Height 945 (37.3”)SPF-200A : Height 1,250 (49.3”)
ST-CV
500
ST-40
CCRCCR-DX
ST-CV
SA-40
FC-200A HP-200A
BC-20
CollatorVAC-100VAC-60H
SC-200
IFU-200
SPF-200A
SSK-200
MKU-54
HOF-30
HOF-20
LC-200
PST-40
Bookletmaker SP F-200A/F C-200ABookletmaker SP F-200A/F C-200A Bookletmaker SP F-200A/F C-200A
Todos los ajustes pueden se realizados desde el panel touchscreen, incluso la presión de los rodillos de doblado.
Su función de eyección permite una producción contínua sin paradas. Los juegos defectuosos son desviados a una bandeja. Solo los juegos correctos son entregados en la salida.
Su pantalla touchscreen es de operación intuitiva, basada en íconos para facilitar el manejo y la corrección de probelmas.
Incluye sensor de emparejado y sensor de alambre para maximizar su productividad y eficiencia. Además ofrece como opcionales un detector de broche y un detector de espesor para mayor control de calidad.
El sistema puede ser conectado a un workflow JDF mediante el sistema de control de terminación pXnet.
El sistema Horizon pXnet aprovecha el poder del JDF a través de la terminación, permitiendo a los trabajos fluir en todo el proceso de producción desde MIS, Pre-prensa, Impresión y Post-prensa
100318/SO/SPF200A/06E/TV
510 Kuze Ooyabu-cho, Minami-ku, Kyoto, 601-8206, Japan Phone : +81-(0)75-934-6700, Fax : +81-(0)75-934+6708, www.horizon.co.jp
HORIZON INTERNATIONAL, INC.
OptionEnhance the SPF-200A/FC-200A with Horizon’s unique pXnet bindery control system.
The Horizon pXnet system leverages the power of JDF across the bindery, allowing jobs to flow seamlessly through the entire print production process from MIS, Prepress, Press and Postpress.
Sistema de Control de Terminación pXnet basado en CIP4
JDF
M I S
JMF
JDF
P r e p r e s s P r e s s P o s t p r e s s
J D F JDF
D i g i t a l P r e s s
J D F JDF (Basado on CIP4)
J D F J D F
J M F
Control PC
Options
SPF-200A+FC-200A+ST-40+Collator (VAC-100/60H)
SPF-200A+HP-200A+FC-200A+HOF-30+Collator (VAC-100/60H)
SPF-200A+FC-200A+HOF-20
SPF-200A/FC-200A
It’s so easy to use.The New Standard for Bookletmaking.
Functions
Sheet Size
Sheet Weight Range
Booklet Size
Stitch Thickness
Fold Thickness
Stitch Distance
Stitching WireError Detector / Indicator
CounterProduction Speed
Voltage / Frequency
Rated Current
Power Consumption
Heat Output
Motors
Machine DimensionsNoise Level
Machine Weight
Options
Saddle Stitch and Fold only (Option : Top/Side Stitch, Top Stitch and Fold, Rear Corner Stitch, Front Corner Stitch, Pass Through)
Option :
*The range of sheet size available can be limited when the sheets are fed from VAC/HOF.VAC-100/60H : Max. 350(W) x 500(L) mm (13.775” x 19.685”) Min. 120(W) x 148(L) mm (4.725” x 5.830”)
HOF-20/30 : Max. 350(W) x 500(L) mm (13.775” x 19.685”) Min. 200(W) x 275(L) mm (7.875” x 10.830”)Normal Paper : 64 to 157 gsm, Art Coated Paper : 85 to 157 gsm
Option :
Max. 4 mm (About 48 sheets of Normal Paper 64 gsm) only for Top/Side Stitch and Corner StitchMax. 2 mm (About 24 sheets of Normal Paper 64 gsm) (About 16 sheets of Normal Paper 82 gsm)73 to 290 mm (2.875” x 11.400”) AdjustableIn saddle stitching, the stitch position can be limited by the fold knife.Optional stitching head is available for four stitches.Standard : No.26 (0.5 mm), Option : No.28 (0.4 mm)Jam Detection, Wire Feeding Detection, Jog Error Detection, Option : Stitch DetectionTotal Booklet Count, Batch CountMax. 4,000 booklets/hr. (A4-Finish), Max. 4,500 booklets/hr. (A5-Finish)Single Phase 200 / 220 / 230 / 240 V, 50 / 60 Hz
SPF Main Body : 2,830 kJ (680 kcal)Delivery Conveyor (SC-200 / LC-200) : 10 kJ (4 kcal)SPF Main Body : 400 W x 1, 200 W x 1, 25 W x 1Delivery Conveyor (SC-200 / LC-200) : 15 W x 12,765(W) x 810(D) x 1,250(H) mm (108.9” x 31.9” x 49.3”) (with IFU-200 and SC-200)LA peak : 82.0 dB, LAeq : 77.9 dBSPF-200A+SSK-200 : 468 kg (SPF Accessory 14 kg), IFU-200 : 22 kg, SC-200 : 20 kgSide/Corner Stitch Kit : SSK-200, Paper Insertion Knife Unit : PN-200, Stitch Detector : SDS-200, Four Stitching Unit : FST-200, Short Conveyor : SC-200, Long Conveyor : LC-200
Booklet Size (Before Trim)
Booklet Size (After Trim)
Trimming WidthTrimming ThicknessProduction Speed
Error Detector / Indicator
CounterOther Function
Heat OutputMotors
Machine DimensionsMachine Weight
Options
Max. 356(W) x 254(L) mm (14.000” x 10.000”)Min. 120(W) x 90(L) mm (4.725” x 3.545”)Max. 356(W) x 250(L) mm (14.000” x 9.840”)Min. 120(W) x 85(L) mm (4.725” x 3.350”)Max. 20 mm (0.785”)Max. 4 mm (0.157”)Max. 4,000 booklets/hr. (A4-Finish), Max. 4,500 booklets/hr. (A5-Finish)Jam Detection, Trim Full Detection, Faulty Set Ejection Tray Jam Detection, Option : Booklet Thickness DetectionFore-edge Trimming CounterFaulty Set Ejection1,360 kJ (330 kcal)400 W x 1, 90 W x 1, 60 W x 11,335(W) x 810(D) x 1,070(H) mm (52.6” x 31.9” x 42.2”) (with Short Conveyor SC-200)244 kg (FC Accessory 14 kg)Chip Extractor : TB-200, Booklet Thickness Detector : TD-200, Preset Kicker : PK-30
The SPF-200A/FC-200A bookletmaker features high productivity,cambio automatizado de trabajo y operación simple.
Infeeder Unit : IFU-200Side/Corner Stitch Kit : SSK-200Short Conveyor : SC-200Long Conveyor : LC-200Stitch Detector : SDS-200Four Stitching Unit : FST-200Preset Kicker : PK-30
Booklet Thickness Detector : TD-200Paper Insertion Knife Unit : PN-200Loop Stitch Kit (Part No. 9964401)*Required for each stitcher head.
Chip Extractor : TB-200Press Stacker : PST-40Mobile Knife Fold Unit : MKU-54
Selection
FC-200A+HP-200A+SPF-200A+ST-40+VAC-100a+VAC-100c+PJ-77R
Advanced AutomationAll necessary settings can be performed automatically through the touchscreen display. Even the fold roller gap adjustment is automated.
Non-stop OperationA reject function allows non-stop operation. Errored booklets are rejected into the built-in reject tray so only good booklets are delivered to the conveyor.
Color TouchscreenThe 10.4 inch large color touchscreen features intuitive, icon-based operation for easy operation and quick troubleshooting.
High Speed ProductionMaximum production speed is 4,500 books per hour with A5 booklets.
Quality ControlThe wire feeding sensor and jog sensor are equipped to maximize productivity and efficiency. Optional mis-stitch detector and thickness detector are available for higher quality control.
JDF WorkflowSystem can be enhanced with JDF workflow from upstream to the postpress using pXnet bindery control system.
Features
SPF-200A Major Specifications Machine Dimensions Unit : mm (inch)
System Configuration
*The machine design and specifications are subject to change without any notice.
FC-200A Major Specifications
Max. 356(W) x 508(L) mm (14.000” x 20.000”)Min. 120(W) x 180(L) mm (4.725” x 7.090”)
Max. 356(W) x 432(L) mm (14.000” x 17.000”)Min. 180(W) x 138(L) mm (7.090” x 5.435”)Max. 356(W) x 432(L) mm (14.000” x 17.000”)Min. 180(W) x 180(L) mm (7.090” x 7.090”)Max. 326(W) x 364(L) mm (12.820” x 14.330”)Min. 210(W) x 210(L) mm (8.270” x 8.270”)Max. 356(W) x 508(L) mm (14.000” x 20.000”)Min. 120(W) x 180(L) mm (4.725” x 7.090”)
Saddle Stitchand Fold only
Top/Side Stitch
Top Stitch and Fold
Corner Stitch
Pass Through
Saddle Stitchand Fold only
Top Stitch and Fold
SPF-200A+FC-200A
SPF-200A Only
SPF-200A+FC-200A
SPF-200A Only
Max. 356(W) x 254(L) mm (14.000” x 10.000”)With Trimming : Max. 356(W) x 250(L) mm (14.000” x 9.840”)Min. 120(W) x 90(L) mm (4.725” x 3.545”)With Trimming : Min. 120(W) x 85(L) mm (4.725” x 3.350”)
Max. 356(W) x 254(L) mm (14.000” x 10.000”)Min. 180(W) x 90(L) mm (7.090” x 3.545”)
200 V, 50 Hz, 6.6 A / 60 Hz, 6.4 A 220 V, 50 Hz, 6.4 A / 60 Hz, 5.9 A230 V, 50 Hz, 5.3 A / 60 Hz, 5.1 A 240 V, 50 Hz, 5.1 A / 60 Hz, 4.8 A200 V, 50 Hz, 4.4 A / 60 Hz, 4.2 A 220 V, 50 Hz, 4.3 A / 60 Hz, 4.0 A230 V, 50 Hz, 3.4 A / 60 Hz, 3.2 A 240 V, 50 Hz, 3.1 A / 60 Hz, 3.0 A200 V, 50 Hz, 1,020 W / 60 Hz, 1,060 W 220 V, 50 / 60 Hz, 1,050 W230 V, 50 / 60 Hz, 1,040 W 240 V, 50 Hz, 1,050 W / 60 Hz, 1,030 W200 V, 50 / 60 Hz, 650 W 220 V, 50 / 60 Hz, 680 W230 V, 50 Hz, 680 W / 60 Hz, 660 W 240 V, 50 / 60 Hz, 640 W
650 (25.6”) 955
(37.6”)
810 (31.9”)670 (26.4”)
1,210 (47.7”) 1,295 (51.0”)2,280 (89.8”)
810(31.9”)
LC-200
SC-200 FC-200A : Height 1,070 (42.2”)
VAC Collator
ST-40 : Height 1,027 (40.5”)
SPF-200A : Height 1,250 (49.3”)
650 (25.6”) 955
(37.6”)
810 (31.9”)670 (26.4”) 1,470 (57.9”)2,780 (109.5”)
810(31.9”)
SC-200
FC-200A : Height 1,070 (42.2”)
HP-200A : Height 1,035 (40.8”)
VAC Collator
HOF-30 : Height 945 (37.3”)
SPF-200A : Height 1,250 (49.3”)
630 (24.9”)
670 (26.4”) 1,700 (67.0”)2,280 (89.8”)
810(31.9”)
SC-200
FC-200A : Height 1,070 (42.2”)
HOF-20 : Height 945 (37.3”)SPF-200A : Height 1,250 (49.3”)
ST-CV
500
ST-40
CCRCCR-DX
ST-CV
SA-40
FC-200A HP-200A
BC-20
CollatorVAC-100VAC-60H
SC-200
IFU-200
SPF-200A
SSK-200
MKU-54
HOF-30
HOF-20
LC-200
PST-40
Bookletmaker SP F-200A/F C-200AArmadora de Revistas SPF-200A/FC-200A Bookletmaker SP F-200A/F C-200A
(Basado on CIP4) (Basado on CIP4) (Basado on CIP4)
Errored sets are rejected to the reject tray so that only the correct booklets are delivered to the conveyor.
The servo-motor is employed for knife driving to provide high speed and sharp fore-edge trimming.The top-bottom transport belt insures smooth booklet transportation and delivery.Trimmings are blown down into the external trim box by air so that no chips are left in the trimming area.Durable casting structure for quality trimming.
The SC-200 is compact conveyor which saves the floor space. Finished booklets are neatly delivered to the exit conveyor.
SC-200 Short Conveyor
The LC-200 is 54 cm (21”) longer than the SC-200 Short Conveyor. The large number of booklets are neatly delivered.
LC-200 Long Conveyor
1
345
2
1
3
2
Fore-edge Trimming Collating
Folding Stitching
SPF-200A Abrochado y Doblado FC-200A Refilado Frontal
Options HP-200A Hole Punch Unit
Either the SC-200 Short Conveyor or the LC-200 Long Conveyor is selected.Conveyor belt running time and batch counter can be controlled from the SPF-200A touchscreen.The booklet on the conveyor can be easily delivered pressing eject button.The conveyor is connectable to the SPF-200A directly.
Connects the collators to the SPF-200A, the ST-40 serves as a high-capacity offset or straight stacking device.Errored sets are delivered to the built-in reject tray for non-stop operation.
ST-40 Bypass StackerAccording to a preset number input on the touchscreen, one booklet is skewed to easily identify and separate the end of a series.
PK-30 Preset Kicker
One-touch switching between the bookletmaker and Criss-Cross receiving tray.A built-in reject tray is provided for non-stop collation.
BC-20 Bypass Conveyor
The SA-40 temporarily accumulates the sheets delivered from the collator and stabilizes the sheet jog for quality stitching and bookletmaking.
SA-40 Sub Accumulator
The TD-200 checks the thickness of each booklet. An errored book is rejected to the reject tray for non-stop operation.
TD-200 Booklet Thickness Detector
The SSK-200 enables the SPF-200A to perform Side/Corner stitching.Side/Corner stitched set can be delivered to the same delivery conveyor used for booklets without any change.
SSK-200 Side/Corner Stitch KitThe first rollers remove the air and the second rollers powerfully compress the booklet for reduced bulk and tighter finishing.
PST-40 Press Stacker
Additional stitcher heads can be mounted for up to 4 stitches per booklet. Optional stitcher heads (#28 – thickness 0.4 mm) are available.
FST-200 Four Stitching Unit
An optional loop stitch kit can be fitted to the standard stitcher heads to meet a variety of customer applications.Loop stitch kit is required for each stitcher head.
Loop Stitch Kit (Part No. 9964401)
The PN-200 inserts a single sheet into the center spread of a booklet. For example, an A4 size single sheet can be inserted into the A3 size booklet.
PN-200 Paper Insertion Knife Unit
The SDS-200 checks the stitch on each booklet for higher quality control. A mis-stitched booklet is rejected to the reject tray for non-stop operation.
SDS-200 Mis-Stitch Detector
Finished booklets can folded in line with the SPF-200A.Knife unit reverse function provides flexibility to choose fold-up or fold-down.
MKU-54 Mobile Knife Fold Unit
Powerfully extracts cutting waste from the fore-edge trimmer.
TB-200 Chip Extractor
Option
Near-Line Solution with HOF-20/30
FC-200A+SPF-200A+HOF-30+VAC-100 (20 bins)
FC-200A+SPF-200A+HOF-20
As digital printing becomes more popular, the finishing required has become more diverse. Variable data applications with different contents or a different number of pages per book are increasing. Horizon offers the HOF series off-line sheet feeder as the best near-line solution for bookletmaking of digitally-imaged output.
The advantages of this near-line solution;1. High Productivity - Since the printer and finisher are
physically separate, the printer and finisher can run at highest speed independent of the production speed of the other system.
2. Economic Efficiency - A single system can handle the output from multiple printers.
3. Flexibility - The HOF-30 can be connected to the collators to handle both offset and digital output.
HOF-20 / HOF-30 High Speed Off-line Feeder Option
*ST-40 requires to connect SA-40.
User FriendlinessNecessary settings and operation can be performed automatically by inputting the sheet size in the color touchscreen on the SPF-200A. Changeover for 2 holes and 4 holes is easy for user-friendly operation.
StabilityThe top-bottom transport belt insures stable booklet transportation. Blower air at fore-edge jog section is equipped as a standard for more accurate and stable production.
High ProductivityHigh speed hole punching can be performed without effect on *the production speed of the SPF-200A. Hole punch, press and through modes can be selected for efficient in-line bookletmaking production.
*Production speed changes depending on the binding mode, booklet thickness and sheet condition.
User-friendly, highly productive performance for efficient hole-punched bookletmaking.
Specifications
Sheet Size
Sheet Weight RangePunch ThicknessNumber of HolesPunch Hole PitchPunch Hole PositionPunch Hole DiameterProduction Speed
Machine DimensionsMachine Weight
Punch / Max. 356(W) x 254(L) mm (14.00” x 10.00”)
Press (When inserting a paper, 356(W) x 235(L) mm [14.00” x 9.25”])
Min. 210(W) x 148(L) mm (8.27” x 5.83”)
Through Max. 356(W) x 508(L) mm (14.00” x 20.00”)
Min. 120(W) x 90(L) mm (4.73” x 3.55”)
Max. Thickness of Sheet Block 4 mm (0.15”) (Depending on sheet weight)
64 to 157 gsm Normal Paper / 85 to 157 gsm Coated Paper Max. 3.2 mm (0.12”) (Up to 40 sheets, 20 sheets stitched and folded, of 64 gsm)
4 / 2 holes80 mmDimension from the booklet spine to center of hole can be adjusted from 9 through 14 mm with panel setting.6 mmSaddle Stitch Max. 4,300 booklets/hr. (A5 Booklet, Booklet Thickness 2.5 mm [0.098”] or less)
Fold Only Max. 4,000 booklets/hr. (A5 Booklet, Booklet Thickness 2.5 mm [0.098”] or less)
500(W) x 770(D) x 1,035(H) mm (19.7” x 30.4” x 40.8”)
186 kg (410 lb)
ModelSheet Size
Sheet Weight Range
Feed Speed
Sheet Pile Height on Feed TrayMachine DimensionsMachine Weight
HOF-30Max. 350(W) x 500(L) mm (13.77” x 19.68”)
Min. 200(W) x 275(L) mm (7.88” x 10.83”)
Bypass mode: Min. 120(W) x 180(L) mm (4.73” x 7.09”)
52 to 130 gsm Normal Paper73 to 160 gsm Coated Paper
Max. 27,000 sheets/hr.
Max. 430 mm (16.9”)
1,460(W) x 630(D) x 945(H) mm (57.5” x 24.9” x 37.3”)
180 kg (396 lb)
HOF-20Max. 350(W) x 500(L) mm (13.77” x 19.68”)
Min. 200(W) x 275(L) mm (7.88” x 10.83”)
Sheet Feed Station: 52 to 130 gsm Normal Paper 73 to 160 gsm Coated PaperCover Feed Station: 64 to 256 gsm Normal Paper 79 to 256 gsm Coated PaperSheet Feed Station: Max. 27,000 sheets/hr.Cover Feed Station: Max. 8,000 sheets/hr.Sheet Feed Station: Max. 430 mm (16.9”)
Cover Feed Station: Max. 130 mm (5.1”)
1,750(W) x 630(D) x 950(H) mm (68.9” x 24.9” x 37.5”)
210 kg (463 lb)
Specifications
Abrochado 3
Emparejado 4
Doblado 5
Touchscreen Color 1 Fore-edge Trimming 1 SelectionConveyor 2
Faulty Set Rejection 3
Insertadora Manual: IFU-200 2
Bookletmaker SP F-200A/F C-200A
El SPF-200A/FC-200A es un sistema en línea de alta performance con alzado, abrochado, doblado y refilado frontal de una producción de hasta 4,500 juegos/hora.
Su pantalla color touchscreen es intuitiva, basada en íconos, para fácil operación.Puede memorizar y guardar hasta 200 trabajos de manera alphanumérica, para una rápida búsqueda.La alzadora puede ser controlada desde el SPF-200A.Los ajustes finos se pueden realizar durante la producción para mayor calidad de terminación.
Incluye 3 modos de insertado:Combinación pliegos sobre los pliegos alzados.Combinación pliegos bajo los pliegos alzados.Insertado simple de pliegos.
El sensor de alambre alerta cuando el rollo de alambre estar por terminarse o trabado, y detiene el sistema para evitar juegos sin abrochado.Hasta 48 pliegos de papel normal (64g) pueden ser abrochados ó hasta 24 pliegos de papel normal (64g) pueden ser abrochados y doblados.Incluye confiables cabezales de abrochado marca Hohner.La posición y distancia de abrochados se ajustan de forma automática.
El emparejado puede ser ajustado para manejar variedades de tipo de papel.
Los rodillos de doblado y presión se ajustan de forma automática de acuerdo con el espesor de la revista.El sensor de emparejado detecta revistas con errores y las desvía a la bandeja de error.Los pleigos son registra-dos firmemente en todas las direcciónes para lograr un doblado preciso.
SC-200 Mesa de Entrega Corta
LC-200 Mesa de Entrega Larga
1
345
2
1
3
2
Refilado Frontal Alzado
Doblado Cosido
SPF-200A Abrochado y Doblado FC-200A Refilado Frontal
Options HP-200A Hole Punch Unit
Connects the collators to the SPF-200A, the ST-40 serves as a high-capacity offset or straight stacking device.Errored sets are delivered to the built-in reject tray for non-stop operation.
ST-40 Bypass StackerAccording to a preset number input on the touchscreen, one booklet is skewed to easily identify and separate the end of a series.
PK-30 Preset Kicker
One-touch switching between the bookletmaker and Criss-Cross receiving tray.A built-in reject tray is provided for non-stop collation.
BC-20 Bypass Conveyor
The SA-40 temporarily accumulates the sheets delivered from the collator and stabilizes the sheet jog for quality stitching and bookletmaking.
SA-40 Sub Accumulator
The TD-200 checks the thickness of each booklet. An errored book is rejected to the reject tray for non-stop operation.
TD-200 Booklet Thickness Detector
The SSK-200 enables the SPF-200A to perform Side/Corner stitching.Side/Corner stitched set can be delivered to the same delivery conveyor used for booklets without any change.
SSK-200 Side/Corner Stitch KitThe first rollers remove the air and the second rollers powerfully compress the booklet for reduced bulk and tighter finishing.
PST-40 Press Stacker
Additional stitcher heads can be mounted for up to 4 stitches per booklet. Optional stitcher heads (#28 – thickness 0.4 mm) are available.
FST-200 Four Stitching Unit
An optional loop stitch kit can be fitted to the standard stitcher heads to meet a variety of customer applications.Loop stitch kit is required for each stitcher head.
Loop Stitch Kit (Part No. 9964401)
The PN-200 inserts a single sheet into the center spread of a booklet. For example, an A4 size single sheet can be inserted into the A3 size booklet.
PN-200 Paper Insertion Knife Unit
The SDS-200 checks the stitch on each booklet for higher quality control. A mis-stitched booklet is rejected to the reject tray for non-stop operation.
SDS-200 Mis-Stitch Detector
Finished booklets can folded in line with the SPF-200A.Knife unit reverse function provides flexibility to choose fold-up or fold-down.
MKU-54 Mobile Knife Fold Unit
Powerfully extracts cutting waste from the fore-edge trimmer.
TB-200 Chip Extractor
Option
Near-Line Solution with HOF-20/30
FC-200A+SPF-200A+HOF-30+VAC-100 (20 bins)
FC-200A+SPF-200A+HOF-20
As digital printing becomes more popular, the finishing required has become more diverse. Variable data applications with different contents or a different number of pages per book are increasing. Horizon offers the HOF series off-line sheet feeder as the best near-line solution for bookletmaking of digitally-imaged output.
The advantages of this near-line solution;1. High Productivity - Since the printer and finisher are
physically separate, the printer and finisher can run at highest speed independent of the production speed of the other system.
2. Economic Efficiency - A single system can handle the output from multiple printers.
3. Flexibility - The HOF-30 can be connected to the collators to handle both offset and digital output.
HOF-20 / HOF-30 High Speed Off-line Feeder Option
*ST-40 requires to connect SA-40.
User FriendlinessNecessary settings and operation can be performed automatically by inputting the sheet size in the color touchscreen on the SPF-200A. Changeover for 2 holes and 4 holes is easy for user-friendly operation.
StabilityThe top-bottom transport belt insures stable booklet transportation. Blower air at fore-edge jog section is equipped as a standard for more accurate and stable production.
High ProductivityHigh speed hole punching can be performed without effect on *the production speed of the SPF-200A. Hole punch, press and through modes can be selected for efficient in-line bookletmaking production.
*Production speed changes depending on the binding mode, booklet thickness and sheet condition.
User-friendly, highly productive performance for efficient hole-punched bookletmaking.
Specifications
Sheet Size
Sheet Weight RangePunch ThicknessNumber of HolesPunch Hole PitchPunch Hole PositionPunch Hole DiameterProduction Speed
Machine DimensionsMachine Weight
Punch / Max. 356(W) x 254(L) mm (14.00” x 10.00”)
Press (When inserting a paper, 356(W) x 235(L) mm [14.00” x 9.25”])
Min. 210(W) x 148(L) mm (8.27” x 5.83”)
Through Max. 356(W) x 508(L) mm (14.00” x 20.00”)
Min. 120(W) x 90(L) mm (4.73” x 3.55”)
Max. Thickness of Sheet Block 4 mm (0.15”) (Depending on sheet weight)
64 to 157 gsm Normal Paper / 85 to 157 gsm Coated Paper Max. 3.2 mm (0.12”) (Up to 40 sheets, 20 sheets stitched and folded, of 64 gsm)
4 / 2 holes80 mmDimension from the booklet spine to center of hole can be adjusted from 9 through 14 mm with panel setting.6 mmSaddle Stitch Max. 4,300 booklets/hr. (A5 Booklet, Booklet Thickness 2.5 mm [0.098”] or less)
Fold Only Max. 4,000 booklets/hr. (A5 Booklet, Booklet Thickness 2.5 mm [0.098”] or less)
500(W) x 770(D) x 1,035(H) mm (19.7” x 30.4” x 40.8”)
186 kg (410 lb)
ModelSheet Size
Sheet Weight Range
Feed Speed
Sheet Pile Height on Feed TrayMachine DimensionsMachine Weight
HOF-30Max. 350(W) x 500(L) mm (13.77” x 19.68”)
Min. 200(W) x 275(L) mm (7.88” x 10.83”)
Bypass mode: Min. 120(W) x 180(L) mm (4.73” x 7.09”)
52 to 130 gsm Normal Paper73 to 160 gsm Coated Paper
Max. 27,000 sheets/hr.
Max. 430 mm (16.9”)
1,460(W) x 630(D) x 945(H) mm (57.5” x 24.9” x 37.3”)
180 kg (396 lb)
HOF-20Max. 350(W) x 500(L) mm (13.77” x 19.68”)
Min. 200(W) x 275(L) mm (7.88” x 10.83”)
Sheet Feed Station: 52 to 130 gsm Normal Paper 73 to 160 gsm Coated PaperCover Feed Station: 64 to 256 gsm Normal Paper 79 to 256 gsm Coated PaperSheet Feed Station: Max. 27,000 sheets/hr.Cover Feed Station: Max. 8,000 sheets/hr.Sheet Feed Station: Max. 430 mm (16.9”)
Cover Feed Station: Max. 130 mm (5.1”)
1,750(W) x 630(D) x 950(H) mm (68.9” x 24.9” x 37.5”)
210 kg (463 lb)
Specifications
Abrochado 3
Emparejado 4
Doblado 5
Touchscreen Color 1 Refilado Frontal 1 SelecciónEntrega 2
Bandeja de Eyección 3
Insertadora Manual: IFU-200 2
Bookletmaker SP F-200A/F C-200A
El SPF-200A/FC-200A es un sistema en línea de alta performance con alzado, abrochado, doblado y refilado frontal de una producción de hasta 4,500 juegos/hora.
Su pantalla color touchscreen es intuitiva, basada en íconos, para fácil operación.Puede memorizar y guardar hasta 200 trabajos de manera alphanumérica, para una rápida búsqueda.La alzadora puede ser controlada desde el SPF-200A.Los ajustes finos se pueden realizar durante la producción para mayor calidad de terminación.
Incluye 3 modos de insertado:Combinación pliegos sobre los pliegos alzados.Combinación pliegos bajo los pliegos alzados.Insertado simple de pliegos.
El sensor de alambre alerta cuando el rollo de alambre estar por terminarse o trabado, y detiene el sistema para evitar juegos sin abrochado.Hasta 48 pliegos de papel normal (64g) pueden ser abrochados ó hasta 24 pliegos de papel normal (64g) pueden ser abrochados y doblados.Incluye confiables cabezales de abrochado marca Hohner.La posición y distancia de abrochados se ajustan de forma automática.
El emparejado puede ser ajustado para manejar variedades de tipo de papel.
Los rodillos de doblado y presión se ajustan de forma automática de acuerdo con el espesor de la revista.El sensor de emparejado detecta revistas con errores y las desvía a la bandeja de error.Los pleigos son registra-dos firmemente en todas las direcciónes para lograr un doblado preciso.
Un servo motor es empleado para controlar la cuchilla para proveer velocidad y corte preciso.Su correa de transporte inferior-superior asegura una entrega suave.El desperdicio de corte es soplado a un recipiente externo para despejar el área de corte.Estructura de fundición para mayor durabilidad y calidad de corte.
Se puede optar por la mesa de entrega larga LC-200 ó corta SC-200.La velocidad y el contador de la salida pueden ser controlados desde el SPF-200A.Los juegos pueden ser entregados presionando el botón de eyección.La mesa puede ser conectada directamente al SPF-200A
La mesa de entrega SC-200 es compacta para ahorrar espacio. Los juegos termina-dos son apilados prolijamente.
La mesa de entrega LC-200 es 54 cm mas larga que la SC-200. Los juegos terminados son prolijamente apilados.
Los juegos erroneos son desviados a la bandeja de eyección para que solo los juegos correctos sean entregados en la salida.
Jog count and stroke can be set to handle a wide variety of sheets.
Errored sets are rejected to the reject tray so that only the correct booklets are delivered to the conveyor.
Folding roller and press roller gaps are automatically adjusted according to the booklet thickness.The jog sensor detects jog faults and rejects any errored booklets to the reject tray.The sheet is firmly registered with tail edge and top-bottom guides to provide accurate folds.
Three kinds of hand marrying mode are available.Hand marrying mode (top feed) :Merge a hand fed set on a set from the collator.Hand marrying mode (bottom feed) :Merge a set from the collator on a hand fed set.Simple hand feeding mode : Insert one booklet.
The 10.4 inch color touchscreen is intuitive and icon-based for user-friendly operation.200 job settings can be entered and stored alphanumerically, for quick easy search and retrieval.Collating system can be controlled from the SPF-200A.Fine adjustments can be performed on-the-fly while running for high quality finishing.
The wire feeding sensor alerts when the wire spool is nearly empty or jamming, and stops the system to eliminate non-stitched booklets.Up to 48 sheets of normal paper (64 gsm) can be stitched or up to 24 sheets of normal paper (64 gsm) can be stitched and folded.Reliable Hohner stitcher heads are equipped for quality book production.The stitching position and distance are automatically set up for the input size.
The servo-motor is employed for knife driving to provide high speed and sharp fore-edge trimming.The top-bottom transport belt insures smooth booklet transportation and delivery.Trimmings are blown down into the external trim box by air so that no chips are left in the trimming area.Durable casting structure for quality trimming.
The SPF-200A/FC-200A is a high-performance in-line bookletmaking system with collating, stitching, folding and fore-edge trimming at production speeds up to 4,500 books per hour.
The SC-200 is compact conveyor which saves the floor space. Finished booklets are neatly delivered to the exit conveyor.
SC-200 Short Conveyor
The LC-200 is 54 cm (21”) longer than the SC-200 Short Conveyor. The large number of booklets are neatly delivered.
LC-200 Long Conveyor
1
345
2
1
3
2
Fore-edge Trimming Collating
Folding Stitching
SPF-200A Stitcher & Folder FC-200A Fore-edge Trimmer
Opcionales HP-200A Hole Punch Unit
Either the SC-200 Short Conveyor or the LC-200 Long Conveyor is selected.Conveyor belt running time and batch counter can be controlled from the SPF-200A touchscreen.The booklet on the conveyor can be easily delivered pressing eject button.The conveyor is connectable to the SPF-200A directly.
ST-40 Apilador Bypass PK-30 Pateador Contador
BC-20 Apilador en Cruz Bypass
SA-40 Sub Acumulador
TD-200 Detector de Espesor
SSK-200 Abrochado de Lado/Esquina PST-40 Stacker con Presión
FST-200 Unidad para 4 Cabezales
Kit para Broche Omega PN-200 Cuchilla Insertadora
SDS-200 Detector de Broche
MKU-54 Cuchilla Móvil Reversible
TB-200 Extractor de Desperdicio
Option
Near-Line Solution with HOF-20/30
FC-200A+SPF-200A+HOF-30+VAC-100 (20 bins)
FC-200A+SPF-200A+HOF-20
As digital printing becomes more popular, the finishing required has become more diverse. Variable data applications with different contents or a different number of pages per book are increasing. Horizon offers the HOF series off-line sheet feeder as the best near-line solution for bookletmaking of digitally-imaged output.
The advantages of this near-line solution;1. High Productivity - Since the printer and finisher are
physically separate, the printer and finisher can run at highest speed independent of the production speed of the other system.
2. Economic Efficiency - A single system can handle the output from multiple printers.
3. Flexibility - The HOF-30 can be connected to the collators to handle both offset and digital output.
HOF-20 / HOF-30 High Speed Off-line Feeder Option
*ST-40 requerido para conectar SA-40.
User FriendlinessNecessary settings and operation can be performed automatically by inputting the sheet size in the color touchscreen on the SPF-200A. Changeover for 2 holes and 4 holes is easy for user-friendly operation.
StabilityThe top-bottom transport belt insures stable booklet transportation. Blower air at fore-edge jog section is equipped as a standard for more accurate and stable production.
High ProductivityHigh speed hole punching can be performed without effect on *the production speed of the SPF-200A. Hole punch, press and through modes can be selected for efficient in-line bookletmaking production.
*Production speed changes depending on the binding mode, booklet thickness and sheet condition.
User-friendly, highly productive performance for efficient hole-punched bookletmaking.
Specifications
Sheet Size
Sheet Weight RangePunch ThicknessNumber of HolesPunch Hole PitchPunch Hole PositionPunch Hole DiameterProduction Speed
Machine DimensionsMachine Weight
Punch / Max. 356(W) x 254(L) mm (14.00” x 10.00”)
Press (When inserting a paper, 356(W) x 235(L) mm [14.00” x 9.25”])
Min. 210(W) x 148(L) mm (8.27” x 5.83”)
Through Max. 356(W) x 508(L) mm (14.00” x 20.00”)
Min. 120(W) x 90(L) mm (4.73” x 3.55”)
Max. Thickness of Sheet Block 4 mm (0.15”) (Depending on sheet weight)
64 to 157 gsm Normal Paper / 85 to 157 gsm Coated Paper Max. 3.2 mm (0.12”) (Up to 40 sheets, 20 sheets stitched and folded, of 64 gsm)
4 / 2 holes80 mmDimension from the booklet spine to center of hole can be adjusted from 9 through 14 mm with panel setting.6 mmSaddle Stitch Max. 4,300 booklets/hr. (A5 Booklet, Booklet Thickness 2.5 mm [0.098”] or less)
Fold Only Max. 4,000 booklets/hr. (A5 Booklet, Booklet Thickness 2.5 mm [0.098”] or less)
500(W) x 770(D) x 1,035(H) mm (19.7” x 30.4” x 40.8”)
186 kg (410 lb)
ModelSheet Size
Sheet Weight Range
Feed Speed
Sheet Pile Height on Feed TrayMachine DimensionsMachine Weight
HOF-30Max. 350(W) x 500(L) mm (13.77” x 19.68”)
Min. 200(W) x 275(L) mm (7.88” x 10.83”)
Bypass mode: Min. 120(W) x 180(L) mm (4.73” x 7.09”)
52 to 130 gsm Normal Paper73 to 160 gsm Coated Paper
Max. 27,000 sheets/hr.
Max. 430 mm (16.9”)
1,460(W) x 630(D) x 945(H) mm (57.5” x 24.9” x 37.3”)
180 kg (396 lb)
HOF-20Max. 350(W) x 500(L) mm (13.77” x 19.68”)
Min. 200(W) x 275(L) mm (7.88” x 10.83”)
Sheet Feed Station: 52 to 130 gsm Normal Paper 73 to 160 gsm Coated PaperCover Feed Station: 64 to 256 gsm Normal Paper 79 to 256 gsm Coated PaperSheet Feed Station: Max. 27,000 sheets/hr.Cover Feed Station: Max. 8,000 sheets/hr.Sheet Feed Station: Max. 430 mm (16.9”)
Cover Feed Station: Max. 130 mm (5.1”)
1,750(W) x 630(D) x 950(H) mm (68.9” x 24.9” x 37.5”)
210 kg (463 lb)
Specifications
Stitching 3
Jogging 4
Folding 5
Color Touchscreen 1 Fore-edge Trimming 1 SelectionConveyor 2
Faulty Set Rejection 3
Hand Marrying : IFU-200 2
Bookletmaker SP F-200A/F C-200A
Conecta las alzadoras con el SPF-200A. El ST-40 es un apilador de apilado offset o recto de alta capacidad.Los juegos erroneos son desviados a una bandeja para evitar paradas.
De acuerdo a un número ingresado en el panel de operación, una revista es desfasada para identificar el final de una serie.
El TD-200 controla el espesor de cada juego. Los juegos erroneos son desviados a la bandeja de eyección para producción continua.
Potente extractor para los desperdicios de corte.
Los primeros rodillos remueven el aire y los segundos rodillos comprimen firmemente las revistas para reducir el bulto y mejorar la terminación.
Las revistas pueden ser dobladas en línea con el SPF-200A. Gracias a su flexibilidad se puede invertir la cara del doblés.
El PN-200 inserta un pliego en el centro de cada revista. Se puede insertar por ejemplo, un pliego A4 dentro de una revista de formato A3.
El SDS-200 controla broche de cada revista para mejorar el control de calidad. Las revistas sin broche son desviadas a la bandeja de eyección para no detener la producción.
Cambiar entre cosido o apilado en cruz mediante un solo botón.Los juegos erroneos son desviados a una bandeja para evitar paradas.
El SA-40 acumula temporalmente los pliegos alzados y estabiliza los juegos para mejorar la calidad de terminación.
EL SSK-200 permite al SPF-200A abrochado de lado/esquina.Los pliegos abrochados pueden ser enviados a la misma mesa de entrega sin modificaciones.
Se pueden montar hasta 4 cabezales de abrochado. Ademas hay dipsonible como opción cabezales para 0.4 mm de espesor.
Un Kit de abrochado tipo omega puede ser colocado para cumplir con mas demandas de clientes.
Jog count and stroke can be set to handle a wide variety of sheets.
Errored sets are rejected to the reject tray so that only the correct booklets are delivered to the conveyor.
Folding roller and press roller gaps are automatically adjusted according to the booklet thickness.The jog sensor detects jog faults and rejects any errored booklets to the reject tray.The sheet is firmly registered with tail edge and top-bottom guides to provide accurate folds.
Three kinds of hand marrying mode are available.Hand marrying mode (top feed) :Merge a hand fed set on a set from the collator.Hand marrying mode (bottom feed) :Merge a set from the collator on a hand fed set.Simple hand feeding mode : Insert one booklet.
The 10.4 inch color touchscreen is intuitive and icon-based for user-friendly operation.200 job settings can be entered and stored alphanumerically, for quick easy search and retrieval.Collating system can be controlled from the SPF-200A.Fine adjustments can be performed on-the-fly while running for high quality finishing.
The wire feeding sensor alerts when the wire spool is nearly empty or jamming, and stops the system to eliminate non-stitched booklets.Up to 48 sheets of normal paper (64 gsm) can be stitched or up to 24 sheets of normal paper (64 gsm) can be stitched and folded.Reliable Hohner stitcher heads are equipped for quality book production.The stitching position and distance are automatically set up for the input size.
The servo-motor is employed for knife driving to provide high speed and sharp fore-edge trimming.The top-bottom transport belt insures smooth booklet transportation and delivery.Trimmings are blown down into the external trim box by air so that no chips are left in the trimming area.Durable casting structure for quality trimming.
The SPF-200A/FC-200A is a high-performance in-line bookletmaking system with collating, stitching, folding and fore-edge trimming at production speeds up to 4,500 books per hour.
The SC-200 is compact conveyor which saves the floor space. Finished booklets are neatly delivered to the exit conveyor.
SC-200 Short Conveyor
The LC-200 is 54 cm (21”) longer than the SC-200 Short Conveyor. The large number of booklets are neatly delivered.
LC-200 Long Conveyor
1
345
2
1
3
2
Fore-edge Trimming Collating
Folding Stitching
SPF-200A Stitcher & Folder FC-200A Fore-edge Trimmer
Options HP-200A Unidad de Ponchado
Either the SC-200 Short Conveyor or the LC-200 Long Conveyor is selected.Conveyor belt running time and batch counter can be controlled from the SPF-200A touchscreen.The booklet on the conveyor can be easily delivered pressing eject button.The conveyor is connectable to the SPF-200A directly.
Connects the collators to the SPF-200A, the ST-40 serves as a high-capacity offset or straight stacking device.Errored sets are delivered to the built-in reject tray for non-stop operation.
ST-40 Bypass StackerAccording to a preset number input on the touchscreen, one booklet is skewed to easily identify and separate the end of a series.
PK-30 Preset Kicker
One-touch switching between the bookletmaker and Criss-Cross receiving tray.A built-in reject tray is provided for non-stop collation.
BC-20 Bypass Conveyor
The SA-40 temporarily accumulates the sheets delivered from the collator and stabilizes the sheet jog for quality stitching and bookletmaking.
SA-40 Sub Accumulator
The TD-200 checks the thickness of each booklet. An errored book is rejected to the reject tray for non-stop operation.
TD-200 Booklet Thickness Detector
The SSK-200 enables the SPF-200A to perform Side/Corner stitching.Side/Corner stitched set can be delivered to the same delivery conveyor used for booklets without any change.
SSK-200 Side/Corner Stitch KitThe first rollers remove the air and the second rollers powerfully compress the booklet for reduced bulk and tighter finishing.
PST-40 Press Stacker
Additional stitcher heads can be mounted for up to 4 stitches per booklet. Optional stitcher heads (#28 – thickness 0.4 mm) are available.
FST-200 Four Stitching Unit
An optional loop stitch kit can be fitted to the standard stitcher heads to meet a variety of customer applications.Loop stitch kit is required for each stitcher head.
Loop Stitch Kit (Part No. 9964401)
The PN-200 inserts a single sheet into the center spread of a booklet. For example, an A4 size single sheet can be inserted into the A3 size booklet.
PN-200 Paper Insertion Knife Unit
The SDS-200 checks the stitch on each booklet for higher quality control. A mis-stitched booklet is rejected to the reject tray for non-stop operation.
SDS-200 Mis-Stitch Detector
Finished booklets can folded in line with the SPF-200A.Knife unit reverse function provides flexibility to choose fold-up or fold-down.
MKU-54 Mobile Knife Fold Unit
Powerfully extracts cutting waste from the fore-edge trimmer.
TB-200 Chip Extractor
Opción
Soluciónes en Línea HOF-20/30
FC-200A+SPF-200A+HOF-30+VAC-100 (20 Estaciones)
FC-200A+SPF-200A+HOF-20
Ventajas de los alimetadores HOF:1. Alta Productividad
2. Eficiencia Económica
3. Flexibilidad
HOF-20 / HOF-30 Alimentador In/Off-line Opción
*ST-40 requires to connect SA-40.
Fácil Operación
Estabilidad
High Productivity
Especificaciones
Tamaño de Pliego
Rango de GramajeEspsor de PerforadoCant. PerforacionesIntervalo de PerforadoPosición de PerforadoDiametro de PerforaciónVelocidad de Producción
DimensionesPeso
Perforado/ Max. 356( A) x 254(L) mm (14.00” x 10.00”)
Prensado (Insertando un papel, 356 ( A) x 235(L) mm [14.00” x 9.25”])
Min. 210( A) x 148(L) mm (8.27” x 5.83”)
By-Pass Max. 356( A) x 508(L) mm (14.00” x 20.00”)
Min. 120( A) x 90(L) mm (4.73” x 3.55”)
Max. Espesor de Block 4 mm (0.15”) (Dependiendo del Gramaje)
64 a 157 gsm Papel Normal / 85 a 157 gsm Paper EncapadoMax. 3.2 mm (0.12”) (Hasta 40 pliegos, 20 pliegos abrochados y doblados, de 64 gsm)
4 / 2 Agujeros80 mm
6 mmAbrochado Max. 4,300 juegos/hr. (En A5, Espesor 2.5 mm o menos) Solo Doblado Max. 4,000 juegos/hr. (En A5, Espesor 2.5 mm o menos)500( A) x 770(L ) x 1,035(H) mm (19.7” x 30.4” x 40.8”)
186 kg (410 lb)
ModeloTamaño de Pliego
Rango de Gramaje
Velocidad
Capacidad de Carga
DimensionsPeso
HOF-30Max. 350( A) x 500(L) mm (13.77” x 19.68”)
Min. 200( A) x 275(L) mm (7.88” x 10.83”)
Modo Bypass: Min. 120( A) x 180(L) mm (4.73” x 7.09”)
52 to 130 gsm Papel Normal73 to 160 gsm Papel Encapado
Max. 27,000 pliegos/hr.
Max. 430 mm (16.9”)
1,460( A) x 630( L) x 945(H) mm (57.5” x 24.9” x 37.3”)
180 kg (396 lb)
HOF-20Max. 350( A) x 500(L) mm (13.77” x 19.68”)
Min. 200( A) x 275(L) mm (7.88” x 10.83”)
Aliment. de Pliegos: 52 to 130 gsm Papel Normal 73 to 160 gsm Papel EncapadoAliment. de Tapas: 64 to 256 gsm Papel Normal
79 to 256 gsm Papel EncapadoAliment. de Pliegos: Max. 27,000 pliegos/hr.Aliment. de Tapas: Max. 8,000 tapas/hr.Aliment. de Pliegos: Max. 430 mm (16.9”)
Aliment. de Tapas: Max. 130 mm (5.1”)
1,750( A) x 630(L ) x 950(H) mm (68.9” x 24.9” x 37.5”)
210 kg (463 lb)
Especificaciones
Stitching 3
Jogging 4
Folding 5
Color Touchscreen 1 Fore-edge Trimming 1 SelectionConveyor 2
Faulty Set Rejection 3
Hand Marrying : IFU-200 2
Armadora de Revistas SPF-200A/FC-200A
Fácil operación, alta productividad y eficiencia para revistas perforadas.
Todos los ajustes necesarios se realizan automáti-camente ingresando las medidas en el panel touchscreen. Es muy sencillo cambiar de 2 a 4 perforaciones.
Las correas superior e inferior aseguran un transporte estable de los pliegos. Incluye ademas un soplador de air para mayor precisión y estabili-dad de producción.
Su perforado de alta velocidad no afecta la velocidad de producción del SPF-200A. Los modos perforado, prensado o bypass pueden ser seleccionados para una eficiente producción en línea.
*La velocidad de producción puede variar de acuerdo al tipo de trabajo, espesor y condición del papel.
La distancia desde el lomo hasta el perforado puede ser ajustada entre 9 mm hasta 14 mm desde el panel.
Mientras la impresión digital se vuelve mas popular, las soluciones de terminación se tornan mas diversas. La impresión variable con distinto contenido ó cantidad de páginas esta creciendo. Horizon ofrece los alimentadores serie HOF como la mejor solución dentro o fuera de línea para la producción de revistas de impresión digital.
- Cuando la impresión y la terminación se encuentran fisicamente separadas, los procesos pueden funcionar independientemente a máxima velocidad sin depender de la producción del otro sistema. - Un solo sistema puede mane-jar la producción de varias impresoras. - El HOF-30 puede ser conectado también con las alzadoras para combinar impresión Offset y Digital.
100318/SO/SPF200A/06E/TV
510 Kuze Ooyabu-cho, Minami-ku, Kyoto, 601-8206, Japan Phone : +81-(0)75-934-6700, Fax : +81-(0)75-934+6708, www.horizon.co.jp
HORIZON INTERNATIONAL, INC.
OptionEnhance the SPF-200A/FC-200A with Horizon’s unique pXnet bindery control system.
The Horizon pXnet system leverages the power of JDF across the bindery, allowing jobs to flow seamlessly through the entire print production process from MIS, Prepress, Press and Postpress.
pXnet Bindery Control System based on the view of CIP4
JDF (Based on CIP4)
M I S
JMF (Based on CIP4)
JDF (Based on CIP4)
P r e p r e s s P r e s s P o s t p r e s s
J D F JDF (Based on CIP4)
D i g i t a l P r e s s
J D F JDF (Based on CIP4)
J D F J D F
J M F
Control PC
Opcionales
SPF-200A+FC-200A+ST-40+Alzadora (VAC-100/60H)
SPF-200A+HP-200A+FC-200A+HOF-30+Alzadora (VAC-100/60H)
SPF-200A+FC-200A+HOF-20
SPF-200A/FC-200A
It’s so easy to use.The New Standard for Bookletmaking.
Funciones
Tamaño de Pliego
Rango de Gramaje
Tamaño de Revista
Espesor de Abrochado
Espesor de Doblado
Distancia de Abrochado
Tipo de AlambreDetector / Indicador de Error
ContadorVelocidad de Producción
Voltaje / Frecuencia
Corriente Nominal
Consumo
Emisión de Calor
Motores
DimensionesNivel de Ruido
Peso
Opcionales
Abrochado y Doblado (Opcional: Abrochado de Esquina/Lado con Doblado, Abrochado de Esquina en ambos lados, Bypass)
Opción:
*El Rango de tamaño puede limitarse cuando es alimentado por VAC/HOF.VAC-100/60H : Max. 350( A) x 500(L) mm (13.775” x 19.685”) Min. 120(A ) x 148(L) mm (4.725” x 5.830”)
HOF-20/30 : Max. 350(A ) x 500(L) mm (13.775” x 19.685”) Min. 200(A ) x 275(L) mm (7.875” x 10.830”)Papel Normal: 64 a 157 gsm, Papel Ilustración: 85 a 157 gsmt
Opción:
Max. 4 mm (Aprox 48 pliegos de Papel Normal de 64g) Solo para abrochado de lado o esquina.Max. 2 mm (Aprox 24 pliegos de Papel Normal 64 gsm) (Aprox 16 pliegos de Papel Normal 82 gsm)73 a 290 mm (2.875” x 11.400”) AjustableLa distancia en producción de revistas puede ser limitada por la cuchilla de doblado.Opcional para 4 cabezales abrochadores.Standard : No.26 (0.5 mm), Opción : No.28 (0.4 mm)
Total y ParcialMax. 4,000 revistas/hr. (A4-Finish), Max. 4,500 revistas/hr. (A5-Finish)Fase Única 200 / 220 / 230 / 240 V, 50 / 60 Hz
SPF Main Body : 2,830 kJ (680 kcal)Mesa de Entrega (SC-200 / LC-200) : 10 kJ (4 kcal)SPF Main Body : 400 W x 1, 200 W x 1, 25 W x 1Mesa de Entrega (SC-200 / LC-200) : 15 W x 12,765(W) x 810(D) x 1,250(H) mm (108.9” x 31.9” x 49.3”) (with IFU-200 and SC-200)LA peak : 82.0 dB, LAeq : 77.9 dBSPF-200A+SSK-200 : 468 kg (SPF Accessory 14 kg), IFU-200 : 22 kg, SC-200 : 20 kgKit abrochado de lado/esquina: SSK-200, Cuchilla Insertadora: PN-200, Detector de Broche : SDS-200, Unidad 4 Cabezales : FST-200, Salida Corta : SC-200, Salida Larga : LC-200
Tamaño (previo al corte)
Tamaño Final
CorteEspesor
Velocidad de Producción
ContadorOtras FuncionesEmisión de Calor
Motores Dimensiones
PesoOpciones
Max. 356( A) x 254(L) mm (14.000” x 10.000”)Min. 120( A) x 90(L) mm (4.725” x 3.545”)Max. 356( A) x 250(L) mm (14.000” x 9.840”)Min. 120( A) x 85(L) mm (4.725” x 3.350”)Max. 20 mm (0.785”)Max. 4 mm (0.157”)Max. 4,000 revistas/hr. (A4-Finish), Max. 4,500 revistas/hr. (A5-Finish)Detector de Atasco, Detector de Atasco en la bandeja deEyección, Opción : Detector de EspesorContador de CortesEyección de Juegos Defectuosos1,360 kJ (330 kcal)400 W x 1, 90 W x 1, 60 W x 11,335(A) x 810(L ) x 1,070(H) mm (52.6” x 31.9” x 42.2”) (con salida SC-200)244 kg (FC Accesorios 14 kg)
Extractor de Cortes: TB-200, Detector de Espesor: TD-200, Pateador Contador: PK-30
The SPF-200A/FC-200A bookletmaker features high productivity,quick fully-automatic changeover and user-friendly operation.
Alimentador Manual : IFU-200Abrochado Lado/Esquinat : SSK-200Salida Corta : SC-200Salida Larga : LC-200Detector de Broche : SDS-200Unidad para 4 Cabezales : FST-200Pateador Contador : PK-30
Detector de Espesor : TD-200Cuchilla Insertadora : PN-200Kit Broche Omega *Uno por Cabezalt.
Extractor de Cortes : TB-200Stacker con Presión : PST-40Cuchilla Móvil Reversible : MKU-54
Selección
FC-200A+HP-200A+SPF-200A+ST-40+VAC-100a+VAC-100c+PJ-77R
Advanced AutomationAll necessary settings can be performed automatically through the touchscreen display. Even the fold roller gap adjustment is automated.
Non-stop OperationA reject function allows non-stop operation. Errored booklets are rejected into the built-in reject tray so only good booklets are delivered to the conveyor.
Color TouchscreenThe 10.4 inch large color touchscreen features intuitive, icon-based operation for easy operation and quick troubleshooting.
High Speed ProductionMaximum production speed is 4,500 books per hour with A5 booklets.
Quality ControlThe wire feeding sensor and jog sensor are equipped to maximize productivity and efficiency. Optional mis-stitch detector and thickness detector are available for higher quality control.
JDF WorkflowSystem can be enhanced with JDF workflow from upstream to the postpress using pXnet bindery control system.
Features
SPF-200A Especificaciones Dimensiones Unit : mm (inch)
Configuración del Sistema
*El diseño y especificaciones están sujetos a cambios sin previo aviso.
FC-200A Especificaciones
Max. 356( A) x 508(L) mm (14.000” x 20.000”)Min. 120( A) x 180(L) mm (4.725” x 7.090”)
Max. 356( A) x 432(L) mm (14.000” x 17.000”)Min. 180( A) x 138(L) mm (7.090” x 5.435”)Max. 356( A) x 432(L) mm (14.000” x 17.000”)Min. 180( A) x 180(L) mm (7.090” x 7.090”)Max. 326( A) x 364(L) mm (12.820” x 14.330”)Min. 210( A) x 210(L) mm (8.270” x 8.270”)Max. 356( A) x 508(L) mm (14.000” x 20.000”)Min. 120( A) x 180(L) mm (4.725” x 7.090”)
Abrochadoy Doblado
Abroch. de Lado
Abroch de Lado y Doblado
Abroch Esq.
By-Pass
SPF-200A+FC-200A
SPF-200A Solo
SPF-200A+FC-200A
SPF-200A Solo
Max. 356( A) x 254(L) mm (14.000” x 10.000”)Con Refilado : Max. 356 (A ) x 250(L) mm (14.000” x 9.840”)Min. 120( A) x 90(L) mm (4.725” x 3.545”)Con Refilado : Min. 120 (A ) x 85(L) mm (4.725” x 3.350”)
Max. 356(A ) x 254(L) mm (14.000” x 10.000”)Min. 180(A ) x 90(L) mm (7.090” x 3.545”)
200 V, 50 Hz, 6.6 A / 60 Hz, 6.4 A 220 V, 50 Hz, 6.4 A / 60 Hz, 5.9 A230 V, 50 Hz, 5.3 A / 60 Hz, 5.1 A 240 V, 50 Hz, 5.1 A / 60 Hz, 4.8 A200 V, 50 Hz, 4.4 A / 60 Hz, 4.2 A 220 V, 50 Hz, 4.3 A / 60 Hz, 4.0 A230 V, 50 Hz, 3.4 A / 60 Hz, 3.2 A 240 V, 50 Hz, 3.1 A / 60 Hz, 3.0 A200 V, 50 Hz, 1,020 W / 60 Hz, 1,060 W 220 V, 50 / 60 Hz, 1,050 W230 V, 50 / 60 Hz, 1,040 W 240 V, 50 Hz, 1,050 W / 60 Hz, 1,030 W200 V, 50 / 60 Hz, 650 W 220 V, 50 / 60 Hz, 680 W230 V, 50 Hz, 680 W / 60 Hz, 660 W 240 V, 50 / 60 Hz, 640 W
650 (25.6”) 955
(37.6”)
810 (31.9”)670 (26.4”)
1,210 (47.7”) 1,295 (51.0”)2,280 (89.8”)
810(31.9”)
LC-200
SC-200 FC-200A : Altura 1,070 (42.2”)
VAC Collator
ST-40 : Altura 1,027 (40.5”)
SPF-200A : Height 1,250 (49.3”)
650 (25.6”) 955
(37.6”)
810 (31.9”)670 (26.4”) 1,470 (57.9”)2,780 (109.5”)
810(31.9”)
SC-200
FC-200A : Altura 1,070 (42.2”)
HP-200A : Altura 1,035 (40.8”)
VAC Collator
HOF-30 : Altura 945 (37.3”)
SPF-200A : Altura 1,250 (49.3”)
630 (24.9”)
670 (26.4”) 1,700 (67.0”)2,280 (89.8”)
810(31.9”)
SC-200
FC-200A : Altura 1,070 (42.2”)
HOF-20 : Altura 945 (37.3”)SPF-200A : Altura 1,250 (49.3”)
ST-CV
500
ST-40
CCRCCR-DX
ST-CV
SA-40
FC-200A HP-200A
BC-20
AlzadoraVAC-100VAC-60H
SC-200
IFU-200
SPF-200A
SSK-200
MKU-54
HOF-30
HOF-20
LC-200
PST-40
Armadora de Revistas SPF-200A/FC-200ABookletmaker SP F-200A/F C-200A Bookletmaker SP F-200A/F C-200A
Abrochadoy Doblado
Abroch de Lado y Doblado
Detector de Atasco, Alimentación, y Emparejado, Opción: Detector de Borche.
Detector / Indicador de Error