2
800-421-7471 adlertankrentals.com Capacity: 4,630 gal Height: 8'5" Width: 8' Length: 20'9½" Tare Weight: 10,200 lbs All sizes are approximate 4,630 Gallon Horizontal Roll-Off Poly Tank At Adler Tank Rentals, we are committed to providing safe and reliable containment solutions for all types of applications where performance matters. This new tank is fabricated with 1" thick walls, floor and controlled radius corner; the top is ¾" thick. With an increased yield to strength and temperature range. The insulation has improved welding strength and a longer expected life. • Reinforced frames for added durability and support • 4" high strength super duty drain valves • New poly hatch, improved seal & no fasteners • New manway door hatches: (installed) black PG-HDPE & hot dip galvanized integrated to top support hinges. EPDM "Q" seal for fumes, new SS swing bolts & safety decals. All above installed to tank support frame. • Removable 20" I.D manway with viton seal • Higher molecular weight • Lower permeation against cross contamination chemical use • Higher temperature variations • UV stabilizes for outdoor use • 1" thick walls, flow and controlled radius corners, top is ¾" thick. • Repairable if damaged, unlike others cross link materials • Two 3" NPT ports top side • One 3" NPT future level Mechanical Features *Berm is not included with rental of this product.

Horizontal Roll-Off Poly Tank

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Horizontal Roll-Off Poly Tank

800-421-7471 adlertankrentals.com

Capacity: 4,630 galHeight: 8'5"Width: 8'Length: 20'9½"Tare Weight: 10,200 lbsAll sizes are approximate

4,630 GallonHorizontal Roll-Off Poly Tank

At Adler Tank Rentals, we are committed to providing safe and reliable containment solutions for all types of applications where performance matters.

This new tank is fabricated with 1" thick walls, fl oor and controlled radius corner; the top is ¾" thick. With an increased yield to strength and temperature range. The insulation has improved welding strengthand a longer expected life.

• Reinforced frames for added durabilityand support

• 4" high strength super duty drain valves• New poly hatch, improved seal & no fasteners• New manway door hatches: (installed) black

PG-HDPE & hot dip galvanized integrated to top support hinges. EPDM "Q" seal for fumes, new SS swing bolts & safety decals. All above installed to tank support frame.

• Removable 20" I.D manway with viton seal• Higher molecular weight

• Lower permeation against cross contamination chemical use

• Higher temperature variations• UV stabilizes for outdoor use• 1" thick walls, fl ow and controlled radius corners,

top is ¾" thick.• Repairable if damaged, unlike others cross link

materials• Two 3" NPT ports top side • One 3" NPT future level

Mechanical Features

*Berm is not includedwith rental of this product.

Page 2: Horizontal Roll-Off Poly Tank

AT-6086-TS-v1.1© 2019 McGrath RentCorp. All rights reserved.

800-421-7471 adlertankrentals.com

Safety Features

• Non-slip step material on stairs and catwalks• "Safety yellow" fold down rails and catwalks for high visibility• Safe operation reminder decals• Safety side stairway – no mechanical guard rails to set up

Options

• 8" Atmospheric vent, PRV optional• Drain pipe spools: (installed) 4" viton elastomers with full suction. (PP) cam lock fittings. (PP) removable

saddle support. All above installed to tank support frame.• Drain pipe solid cam: (installed) 4" solid machined male cam lock with steel core (PP) molded backing ring• 3" pipe level float

Comprehensive Service

Adler Tank Rentals provides containment solutions for hazardous and non-hazardous liquids and solids. We offer 24-hour emergency service, expert planning assistance, transportation, repair and cleaning services. All of our rental equipment is serviced by experienced Adler technicians and tested to exceed even the most stringent industry standards.

4,630 Gallons Horizontal Roll-Off Poly Tank