HOSES AND HOSES FITTINGS - Milano · HOSES AND HOSES FITTINGS 100R1AT - MEDIUM PRESSURE HYDRAULIC HOSE - Page 135 Standards: EN 853 1SN - SAE 100 R1AT - ISO 1436-1 1SN/R1AT Construction:

MILANO - TECHNICAL CATALOG

HOSES AND HOSES FITTINGS

100R1AT - MEDIUM PRESSURE HYDRAULIC HOSE - Page 135Standards: EN 853 1SN - SAE 100 R1AT - ISO 1436-1 1SN/R1ATConstruction: Inner Tube - Synthetic Rubber / Reinforcement - One steel yarn braid. Coverage - Synthetic rubber, resistant to weather, fuels, ozone and abrasion.Temperature: -40 ° C / + 100 ° C (-40 ° F / + 212 ° F)

Main applications: Petroleum-based oils hydraulic circuit in pulse application; synthetic oils, lubricants oils,

crude oil, hot oil, air, water and oil in aqueous emulsion. Max. Temperature (Intermittent) 257 ° F - 125 ° C

100R2AT - HIGH PRESSURE HYDRAULIC HOSE - Page 135Standards: EN 853 2SN - SAE 100 R2AT - ISO 1436-1 2SN/R2ATConstruction: Inner tube - Synthetic Rubber / Reinforcement - Two steel yarns braids, separated by a rubber layer. Coverage - Synthetic rubber, resistant to weather, fuels, ozone and abrasion.Temperature: -40 ° C / + 100 ° C (-40 ° F / + 212 ° F)

Main applications: Petroleum-based oils hydraulic circuit in pulse application; synthetic oils, lubricants, crude

oil, hot oil, air, water and oil in aqueous emulsion. Max Temperature (Intermittent) 257 ° F - 125 ° C

100R5 - MEDIUM PRESSURE HYDRAULIC HOSE - Page 147Standards: SAE 100 R5Construction: Inner Tube - Synthetic Rubber / Reinforcement - One steel yarn braid and a braided textile yarns separated by a layer of rubber. Coverage - A braided textile yarns, impregnated with synthetic rubber.Temperature: -40 ° C / + 100 ° C (-40 ° F / + 212 ° F)

Main applications: Petroleum-based oils hydraulic circuit in pulse applications, gasoline, lubricants oils, fuel, air

brake, water and oil in aqueous emulsion. Max Temperature (Intermittent) 257 ° F - 125 ° C

100R6 - LOW PRESSURE HYDRAULIC HOSE - Page 156Standards: SAE 100 R6 - 854 R6/1TE EN - ISO 4079-1 R6/1TEConstruction: Inner Tube - Synthetic Rubber / Reinforcement - A braided textile yarn. Coverage - Black synthetic rubber, fuel oil resistant, ozone and abrasion.

Main applications: Low-pressure hydraulic circuits, fuel oils, anti-coagulant solutions, return lines, drain lines,

water or air (max. 70 ° C / 160 ° F). Hose fitting compatible with "push-on".

Print�Page

Print�Chapter

128

http://www.milano.ind.br/downloads/hoses_128.pdf

http://www.milano.ind.br/downloads/hoses.pdf





129

IMPORTANT: In this catalog you will find the main products, applications and combinations. If you need products,

applications or combinations in different sizes, please contact us.

site: www.milano.ind.br - E-mail = [email protected]. Phone (19) 2102-2500 - Fax (19) 2102-2510

STAINLESS STEEL FEXIBLE METAL TUBE (TFI) - Page 201

Specifications: Ribbed with stainless steel yarn external mesh.Construction: Stainless steel flexible ribbed hose AISI 321/304 Reinforcement / Coverage - One or more stainless steel twisted yarns AISI 304.Temperature: - 196 ° C to 600 ° C (-196 ° F / + 1112 ° F )

Main applications: Conduction of liquids, vapors, corrosive gases, fuels and lubricants, liquid oxygen,

nitrogen, argon, LPG, Ammonia, food products, pharmaceuticals, etc.

PTFE HOSE (MTF) - Page 192

Standards: Exceeds SAE J517 / SAE 100R14AConstruction: Inner tube: PTFE Increase / Coverage - A braided stainless steel yarn.Temperature: -50 ° C / + 200 ° C (-40 ° F / + 450 ° F )

Main applications: Hydraulic fluids petroleum-based, water or synthetics, gases and corrosive liquids, circuits

for compressed air, steam and chemicals compatible with Teflon or high temperature.

100R12 - SUPER HIGH PRESSURE HYDRAULIC HOSE - Page 180Standards: EN 856 R12 - SAE 100 R12 - R12 ISO 3862-1Construction: Inner Tube - Synthetic Rubber / Reinforcement – Four spirals steel yarns on a twisted textile yarn. Coverage - Synthetic rubber, resistant to weather, fuels, ozone and abrasion.Temperature: -40 ° C / + 121 ° C (-40 ° F / +250 ° F)

Main applications: Petroleum-based oils hydraulic circuit in pulse application; synthetic oils, lubricants, crude oil, hot oil, air, water and oil in aqueous emulsion.Max Temperature (Intermittent) 257 ° F - 125 ° C

100R8 - HIGH PRESSURE HYDRAULIC HOSE - Page 171

Main applications: High-pressure hydraulic applications, movements and hydraulic transmission. Max Operating

Temperature: 100 ° C for oils and 65 ° C for air, water and aqueous solutions.

Standards: EN 855 R8 - SAE J517 SAE 100R8Construction: Inner tube (Without Sewing) - Thermoplastic elastomer oil resistant/ Reinforcement - Braided high resistant aramid. Coverage - Thermoplastic elastomer with high resistance to weathering, ozone and abrasion.Temperature: -40 ° C / + 100 ° C (-40 ° F / + 212 ° F)

100R7 - MEDIUM PRESSURE HYDRAULIC HOSE - Page 162

Main applications: Medium pressure hydraulic applications, movements and hydraulic transmissions .Max

Operating Temperature: 100 ° C for oils and 65 ° C for air, water and aqueous solutions.

Standards: EN 855 R7 - SAE J517 SAE 100R7Construction: Inner tube (Without Sewing) - Thermoplastic elastomer oil resistant / Reinforcement - Braided polyester. Coverage - Elastomer thermoplastic with high resistance to weathering and abrasion.Temperature: -40 ° C / + 100 ° C (-40 ° F / + 212 ° F)

Print�Page

Print�Chapter










TECHNICAL INFORMATION

Exception 100R5

- 3 3/16 -

- 4 1/4 3/16

- 5 5/16 1/4

- 6 3/8 5/16

- 8 1/2 13/32

-10 5/8 1/2

-12 3/4 5/8

-14 7/8 -

-16 1 7/8

-20 1.1/4 1.1/8

-24 1.1/2 1.3/8

-32 2 1.13/16

-40 - 2.3/8

Raw material

Components Steel Brass

Body Fitting

linear and Nut

SAE 12L14 SAE CA 360 SAE 303169SMnPb Drawn DrawnDrawn

Body Fitting SAE 1020 SAE CA377 SAE 30316Angular 1030 / 1035 Forged Forged

Forged

Ring (Washer) SAE 1008 SAE CA370 SAE 303161010 Drawn Drawn

MATERIALS AND SURFACE TREATMENT

HOSES

Flexible elements for under pressure fluid conduction.

Hoses and Hose fitting allow various combinations and

when mounted are called mounted assembly, identified

by its own coding.

HOSES’ CARACTHERISTICS

Hoses and Hose fitting have all the characteristics

(dimensions, raw materials, etc.) based on standard

SAE J516, SAE J517, SAE J846 and SAE 1231.

The hose has three basic elements

- Inner tube

- Reinforcement

- Coverage

INNER TUBE

Manufactured with high resistant synthetic rubbers,

are responsible for the fluid conduction.

The type of the inner tube rubber must be compatible

with the fluid to be driven (see table of chemical

compatibility information techniques). For any other,

the technical department must be consulted.

REINFORCEMENT

Made of textile or metallic yarns, arranged in one or

more layers (which may also be combined between the

two types of yarn) in accordance with the pressure

range that will be used.

COVERAGE

Made of high resistant synthetic rubber, its function is

the inner tube and reinforcement damage protection

caused by chemical action, abrasion and weathering.

DIMENSIONAL IDENTIFICATION SYSTEM

The hose is dimensionally identified by its inner

diameter, by a system called dash. This system divides

inch in 16 parts, whereby the numerator identifies the

dash.

Ex: hose -4 = 4/16 = 1/4 (hose inner diameter).

The hose SAE 100R5 is an exception from the above

system.

HOSE FITTING

Mounted at the hydraulic hoses ends. The Hose fitting can be:

1 - Hose fitting for a Tube:

End with tube side. Allows connection between tubes of

diameters 4-42 mm.

2 - Hose fitting Flat Edge:

Similar end with cutting ring and nut crimping tube (DIN

Standard)

Allows connection to fittings with tube side.

3 - Hose fitting Male:

End with male threads

Allows connection to the female threads.

- NPT (tapered) - ANSI / ASME B1.20.1-1983

- Bolt - DIN ISO 228 (DIN 259)

- Metric - DIN 13

- Thread UNF / UN - ISO 725

4 - Bend Hose fitting:

End similar to a 90 ° bend tube, for a nut and cutting ring

crimping.

Allows connection to fitting with tube side.

5 - Flange Hose fitting:

End with SAE flange.

Flange SAE J518c - Code 61, mounted with Flange Set -

SAE 3000 PSI.

Flange SAE J518c - Code 62, mounted with Reinforced

Flange Set - SAE 6000 PSI, or Reinforced Metric Flange

Set - SAE 6000 PSI.

6 -Hose fitting "DKO" (24°):

End part similar to the tube, cone 24 ° constructed in one

piece (flexible seal)

7 - Hose fitting SAE Male JIC 37°:

UNF male threaded end with flared JIC 37°.

Allows connection to JIC flared tube 37°.

8 - Hose fitting SAE Female JIC 37° Swivel:

End female thread UNF JIC seal 37°.

Allows connection to any product with male thread UNF

flared JIC 37°.

SURFACE ECOLOGICAL TREATMENT

The MILANO has been using the treatment of zinc electrodepositing

with blue chromate (Trivalent) environmentally friendly, with the use

of trivalent chromium.

Stainless

Steel

Print�Page

Print�Chapter

130




HOSE MANUFACTURER'S RECOMMENDATIONS FOR PROPER INSTALLATION OF MOUNTED, ASSEMBLY


131

WRONG RIGHT

WRONG RIGHT

WRONG RIGHT

WRONG RIGHT

WRONG RIGHTWRONG RIGHT

1 - When straight, the hose installation should leave a

little slack, enough to guarantee that when

pressurized, do not occur leaking on the hose fitting,

due to its length change.

WRONG

WRONG

RIGHT

RIGHT

9 - Avoid contact from hose to parts in high-

temperature. If this is not possible, isolate the hose.

5 - Appropriate length of hose is necessary to

distribute movement on flexing applications and to

prevent abrasion.

8 - Avoid twisting, bending the hose in the same plane

of movement of the piece in which the hose fittings are

connected.

4 - When the bend radius is smaller than the

minimum specified, use angle fittings to prevent

bending.

3 – In a bend case, pay attention to the minimum

bend radius specified for each type of hose, as well as

to calculate the length of it, remember that the hose

fittings are not flexible.

7- Use elbows or other fittings as necessary in

order to eliminate excessive length of hose and

provide a rational installation and easy

maintenance.

6 - To avoid bend hose, in two planes, twisting

trough a clamp fixed to the change of plane.

2 – Be sure that the hose is not twisted.

WRONG RIGHT

Print�Page

Print�Chapter




SELECTION, INSTALLATION AND MAINTENANCE OF HOSES AND MOUNTED ASSEMBLY.


1. ObjectThe hoses (including assemblies) have a finite duration. There are a lot of factors that can reduce its lifetime.This practice is intended to guide and assist the system designers and / or users in the selection, installation and maintenance of hoses. The designers and users should conduct a systematic review of each application and then select, install and maintain hoses to match the conditions and requirements of your particular application.We give below a general guideline, which is not necessarily completed.

WARNING:AN INCORRECT SELECTING, INSTALLATION OR MAINTENANCE COULD RESULT IN PREMATURE FAILURE, LOSS OR INJURY.

2. Selection:We give below a list of factors that must be taken into consideration before deciding on the hose selection.

2.1 Pressure:After determining the system pressure, the hose must be selected so that the recommended maximum working pressure equal to or greater than the system pressure. Pressure peaks above the maximum operating pressure will shorten the hose’s lifetime and must be considered by the hydraulic designer.

2.2 Suction:The hoses used in suction apply, must be selected so that the hose to resist the negative system pressure.

2.3 Temperature:The room and fluid temperature, both the static and transient should be cacodeully considered in order to not exceed the limitations of the hose. Installation deserves special care when performed in multiple hot connections.

2.4 Fluids Compatibility:The hose selection must ensure compatibility between the tube, the cover and the fitting with the fluid carried. Additional precautions should be taken in case of hose to use with gaseous fluids.

2.5 Dimension:The force transmission by pressurized fluid varies according to the pressure and flow velocity. The components dimension must be appropriate in order to maintain minimum pressure losses, and to avoid damage to the hose due to heat generation or excessive turbulence.

2.6 Positioning:The placing on the equipment must be cacodeully done to minimize the problems.

2.7 Environmental conditions:It must be cacodeully secured that the hose and fittings are compatible or are protected in relation to environmental conditions that they will be exposed. Environmental factors such as ultraviolet rays, ozone, salt water, chemicals and air pollutants can cause degradation and premature failure and should thecodeore be taken into consideration.

2.8 Mechanical Loads:External forces can considerably reduce the hose’s lifetime. Mechanical loads which must be considered include: excessive bending, twisting, folding, tensile or side forces, bending radius and vibration. Dare or rotating connection adapters may be necessary to ensure that the hose does not undergo any torsion. In the case of unusual applications, it may be necessary to conduct special tests before selecting the hose.

2.9 Abrasion:Even that the hoses are designed with a reasonable index of abrasion resistance, they should be protected from excessive abrasion, which could result in erosion, weakening or cuts in coverage. Increased exposure will accelerate considerably the failure of the hose.

2.10 Correct connection:There should be proper compatibility between the selected hoses and the fittings based on manufacturer's recommendations, and with the aid of tests by industry standards, such as SAE J517d.

2.11 Length:When establishing the appropriate length of the hose, should considered the absorption of movement, changes in length due to pressure, and the tolerances of the hose and the machine.

2.12 Specifications and Standards:When selecting hose, you should consult the respective specifications and official recommendations, and the industrial manufacturer.

2.13 Hose Cleanliness:The cleaning degree varies on the various hose components. It should be ensured that the selected sets have the cleanliness suitable for the intended application.

2.14 Electrical conductivity:Certain applications require that a hose be nonconductive to prevent electrical current flow. Other applications require the hose has sufficient conductivity to drain static electricity. Hoses and connections should be selected with these factors in mind.

3. Installation:After selecting the proper hose, you should consider the following before installation:

3.1 Pre-Installation Inspection:Before installation, you should make a cacodeul examination of the hose. All components must be checked to determine if they are correct in type, size, etc. Moreover, the responsible must examine the cleanliness, obstructions, blisters, cover looseness or any other visible defects.

3.2 Follow the manufacturer's instructions for the assembly.

3.3 Minimum bend radius:An installation with less than the recommended minimum bend radius can significantly reduce the useful life of the hose. Particular attention should not be missed in order to avoid a sharp bend at the junction hose/fitting.

3.4 Twist Angle and Orientation:The hose must be installed so that relative movement of the machine components produce a hose bend and does not twist.

3.5 Fixing:In many applications it may be necessary to restrict, protect or guide the hose in order to protect it from damage by unnecessary flexing, pressure surges and contact with other mechanical components. Such restrictions must be applied very cacodeully in order to avoid any undue stress or wear points further.

3.6 Proper connection of Ports:The hose physic installation requires a connection point correctly installed so that the hose does not undergo any torsion or torque.

3.7 Avoid outside damage:A proper installation is completed only when the tensile loads, side loads, kinking, flattening, potential abrasion, thread damage, or damage to sealing surface are corrected or eliminated.

3.8 System verification:After completing the installation, you must eliminate all the trapped air, pressurize the system to its maximum pressure, and verify that it works well and if its free of leaks.NOTE: Avoid areas of potential risk during the test.

4. Maintenance:Even with a correct selection and installation, hose life may be significantly reduced if there is an ongoing program of maintenance. The frequency is determined by the severity of application and risk potential. A maintenance program must include at least the following:

4.1 Hose Storage:Hoses stored may suffer adverse effects caused by temperature, moisture, ozone, sunlight, oils, solvents, corrosive liquids and fumes, insects, rodents and radioactive materials. Storage areas should be relatively cool, dark and free from dust, dirt, humidity and dew.

4.2 Visual Inspection:In any case below, the hose must be replaced:(A) Leaks in the hose or fittings. (The leaking fluid is a fire hazard).(B) Damage, cuts or abrasions on the roof (exposed reinforcement).(C) Hose kinked, crushed, flattened or twisted.(D) Hose hard, stiff, heat cracked or charred.(E) Coverage with bubbles, soft, degraded or loose.(I) Fittings cracked, damaged or very corroded.(G) Escaping from the hose connection.

4.3 Visual Inspection:The following items must be tightened, repaired or replaced, where appropriate:(A) Conditions of leakage for binding sites.(B) Clamps, guards, protective covers.(C) Remove excessive buildup of dirt.(D) Fluid level of the circuit, type of fluid and any trapped air.

4.4 Functional Test:Operate the circuit to the maximum working pressure and make sure everything is working fine and no leaks.NOTE: During the test, avoid areas of potential risk.

4.5 Replacement Intervals:Must be observed at specific intervals for replacement based on life before, official recommendations or industrial, or when failures could result in unacceptable machine stoppages, damage or injury.

Print�Page

Print�Chapter

132




133


Type of Coatings application indicatedCode

Coatings

1 weft yarn asbestos

1 plot of galvanized

steel wire

1 plot of stainless

steel wire

2 webs of yarns

of asbestos

2 plots of asbestos

yarn impregnated

with Neoprene

2 plots of asbestos

yarn impregnated

with PTFE

Protection from abrasive action

in corrosive ambient

Protection from abrasive

action

Ambient temperature

to 200 º C

Ambient temperature

to 300 º C

Ambient temperature

up to 260 º C

Ambient temperature

to 300º C and action of oils

and / or grease

Ambient temperature

to 300º C and action of oils

and / or grease

Ambient temperature

to 300º C and action of oils,

grease or corrosive products

compatible with PTFE

Protection from abrasive

action and / or prevent the

radius of curvature becomes

smaller than the minimum

recommended for the hose

* TRAM

* 2TRAM

* TRAMN

* TRAMT

* TRAG

* TRAI

* MC

* MR

* TRAVS

Permissible variation (tolerance)

in length (mm)

Length

(mm) For Hoses For Hosesto -16 above -20 to -32

To 500

Above 500To 1000

Above 1000To 2000

+ 10

- 5

+ 15- 5

+ 20- 10 -

+

-

+ -

+

12

5

208

2510

Above 2000To 6500

Above 6500

+ 1,5 %

- 1,0 %

+ 3 %

- 1 %

DIMENSIONAL IDENTIFICATION SYSTEM

The hose is identified dimensionally by its inner

diameter, by a system called dash. The system

divides a inch in 16 parts, and the denominator

identifies the dash.

Ex: hose -4 = 4/16 = 1/4 (Hose)

The hose SAE 100R5 is an exception to the system

described above.

CODE SYSTEM FOR HOSE FITTING SAE 37 ° JIC.

The code system used is similar to SAE J846 and

consists of two sets of numbers. The first group of

numbers identifies the hose and hose fitting, the

second one identifies the sizes, as described below:

1 – Hose fitting identification:

The hose fitting identification consist of six digits,

divided into three groups of 2 digits, symbolizing

in sequence:

a) the hose fitting type

b) hose fitting format

c) hydraulic hose type

2 – Size identification:

The hose fitting size and the hose is identified by

two numbers codes (dashes). The hose fitting

must precede the hose.

HOW TO ORDER:

1-Hose: Request by the catalog code

2-Hose fittings: Request by the catalog code

3 - Hose Assembled With Hose Fitting:

3.1 - Hose fitting on one end:

Specify the hose with the hose fitting without the

hose trace, the "ST" code, plus the length of the

hose.

Ex: 100R6-8* TLR6 12L * ST * 1000

3.2- Same hose fittings assembled at both ends:

Specify the two hose fittings without the trace of

the hose, plus hose length.

Ex: 100R1AT-12*PTR2 20S*PTR2 20S*800

3.3- Both side with angled hose fittings:

To specify hoses fitted with angled hose fittings at

the ends, put the angle between the hose fittings

considering 0 ° to 360 ° (After the hose length)

in a counterclockwise direction, as the front end

(Figure A).

Ex: 100R2AT PCR2-6 * 12L * 12L PCR2 * 600 * 270

3.4- Hose length (Figure B):

1.The end of the code should specify the length

of the hose with the hose fittings included, if any.

2.The maximum possible length of hose may vary

depending on its dash. Upon request we can

provide up to big lengths.

3. When it is possible, pcodeer to specify hoses lengths

multiples of:

50 mm for lengths up to 1000 mm

100mm length above 1000 mm

4. Permissible variation (tolerance) in the hose length:

3.5- Coatings:

When necessary we can provide, upon request, protective

coatings against the action of the environment (abrasion,

corrosion, temperature).

Coil spring with

a circular cross

section

Coil spring with

rectangular cross section

1 glass fiber fabric

impregnated with

silicone

Print�Page

Print�Chapter




SPECIFICATION SETS FITTED


For Hoses Fit SAE JIC 37°

Assembly length (mm)

Hose code

Second hose fitting code

Angle (expressed in degrees) between the hoses fittings

First hose fitting code

Additional element

ASSEMBLED HOSE LENGTH SPECIFICATION

Figure B

SPECIFICATION OF ANGLES OF HOSE FITTINGS

180º

270º 90º

0º

Figure A

(See Figure A)

(See page 132 ITEM 3.5)

(See Figure B)

100R2AT-20 * PTR2-20 * PMR2 3/4NPT-20 * 900 * xx * xx

100R2AT-20 * 210154-20 * 240154-20 * 900 * xx * xx

For assembled hose with bend hose fittings at both ends, is necessary to specify the angle between the hose fittings. This angle is expressed in degrees, measured between the centerlines of the hose fittings, at front seen and measured in the counterclockwise direction.

Print�Page

Print�Chapter

134




135


MEDIUM PRESSURE HYDRAULIC HOSE100R1AT

100R2AT

Important:

HIGH PRESSURE HYDRAULIC HOSE

# Inch.ID

mm

OD

mm

Pressure WP

bar psi

Pressure B P

bar psi

-4 1/4” 6,4 14,7 400 5800 1600 23200 100-5 5/16” 7,9 16,3 350 5070 1400 20300 114-6 3/8” 9,5 18,7 330 4780 1320 19140 127-8 1/2” 12,7 21,8 275 3980 1100 15950 178-10 5/8” 15,9 25 250 3620 1000 14500 200-12 3/4” 19,1 29 215 3110 860 12470 240-16 1” 25,4 36,8 165 2390 650 9420 300-20 1.1/4” 31,8 47 125 1810 500 7250 419-24 1.1/2” 38,1 53,4 90 1300 360 5220 500-32 2” 50,8 66,2 80 1160 320 4640 630

Specifications: SAE 100 R1AT / EN 853 1SN / ISO 1436-1 1SN/R1AT

Construction: Inner Tube: Synthetic rubberReinforcement: A twisted steel yarn.Coverage: Synthetic rubber, resistant to weather, fuels, ozone and abrasion.

Specifications: SAE 100 R2AT / EN 853 2SN / ISO 1436-1 2SN/R2AT

Construction: Inner Tube: Synthetic rubberReinforcement: Two braided yarn.Coverage: Synthetic rubber, resistant to weather, fuels, ozone and abrasion.

# Inch. IDmm

ODmm

Pressure WPbar psi

Pressure B P bar psi

Min.BendRadius mm

-4 1/4” 6,4 13,2 225 3260 900 13050 100-5 5/16” 7,9 14,8 215 3110 850 12320 114-6 3/8” 9,5 17,1 180 2610 720 10440 127-8 1/2” 12,7 19,4 160 2320 640 9280 178-10 5/8” 15,9 23,3 130 1880 520 7540 200-12 3/4” 19,1 27,3 105 1520 420 6090 240-16 1” 25,4 35,1 88 1270 350 5070 300-20 1.1/4” 31,8 43,3 63 910 250 3620 419-24 1.1/2” 38,1 49,7 50 720 200 2900 500-32 2” 50,8 63,1 40 580 160 2320 630

ID = Inside OD = Outside Pressure WP = Max Working Pressusre Pressure BP = Min Burst Pressure

The hose fittings used in hoses 100R1AT and 100R2AT are common and applied on both types of hoses. Standard Supply Hose fitting in Carbon Steel. The hose fittings can also be supplied in Stainless Steel (See how to request each item)

Min.BendRadius mm


Print�Page

Print�Chapter

Onlinequotation

Onlinequotation




http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=148&category_id=13&keyword=mangueira&option=com_virtuemart&Itemid=1

http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=149&category_id=13&keyword=mangueira&option=com_virtuemart&Itemid=1


Male 24°DIN 8434-1 - PTR2

Page 137

Female Metric Swivel WithO’ring (DKO) - 90° Elbow - PASR2

Page 139

Female Metric SwivelWith O’ring (DKO) - PASR2

Page 138

MALE METRIC STUD and FEMALE METRIC SWIVEL

SAE CODE 61 FLANGE (3000 PSI - STANDARD)

SAE Code 61 Flange Straight SAE Code 61 Flange 45° Elbow SAE Code 61 Flange 90° Elbow - PFR2PFR2 PFR2

Page 146 Page146 Page146

FEMALE JIC 37° SWIVEL

Female JIC 37°Swivel - 240154

Female JIC 37° Swivel45° Elbow - 240354

Female JIC 37° Swivel 90° Elbow - 241454

Female JIC 37°Swivel 90° Elbow(Long) - 241554Page 144 145Page Page 145

Pág. 145

MALE TAPER, MALE PARALLEL and MALE JIC 37°

Male TaperNPT, BSPT e Metric Taper

PMR2Page 142

Male ParallelBSP, METRIC and UN/UNF

PMR2Page 142/143

Male JIC 37°210154Page 144

METRIC STANDPIPES

Metric StandpipesPLR2Page 140

Metric Standpipes 90° ElbowPCR2Page 141

Print�Page

Print�Chapter

136



















137

MALE 24° METRIC STUD

I

EX1EX2

ØT

Important:


6810121518222835426810121416202025 25303838

-4-4-4-6-8-10-12-16-20-32-4-4-4-6-8-8-10-12-12-16-16-20-24

PTR2 6Lx4PTR2 8Lx4PTR2 10Lx4PTR2 12Lx6PTR2 15Lx8PTR2 18Lx10PTR2 22Lx12PTR2 28Lx16PTR2 35Lx20PTR2 42Lx32PTR2 6Sx4PTR2 8Sx4PTR2 10Sx4PTR2 12Sx6PTR2 14Sx8PTR2 16Sx8PTR2 20Sx10PTR2 20Sx12PTR2 25Sx12PTR2 25Sx16PTR2 30Sx16PTR2 38Sx20PTR2 38Sx24

26,527,527,526,530,530,535,539,545,548,526,527,527,526,530,5 30,530,535,535,539,540,547,548,5

1/29/1611/1613/167/81.1/161.1/41.5/81.7/82.1/41/29/1611/1613/167/811.1/41.1/41.3/81.3/81.3/422

9/1611/163/47/81.1/161.1/41.3/81.5/822.3/811/163/47/815/161.1/161.1/41.3/81.3/81.3/41.3/422.3/82.3/8

Part #T I EX2EX1

L

S

Const.Serie

Tubes ( T ) Metric

1 – To order Stainless Steel add the letter “I” in code.Ex PTR2 12L-Ix6, PTR2 20S-Ix12.2 – The assembly working pressure is limited by the hose pressure.3 – On request we can provide the hose fittings with different sizes combination as not seen on the table above:Ex. PTR2 16Sx12, PTR2 12Sx10, PTR2 10Lx8, PTR2 18Lx12.

Hose #

Print�Page

Print�Chapter

Onlinequotation




http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=99&category_id=13&option=com_virtuemart&Itemid=7


FEMALE METRIC SWIVEL WITH O’RING (DKO)

EX2

I

EX1

ØT

Important:

39,9

39,9 44,9

6810121518222835426810121416202025 25303838

-4-4-4-6-8-10-12-16-20-32-4-4-4-6-8-8-10-12-12-16-16-20-24

15Lx8

14Sx816Sx8

PASR2

PASR2 6Lx4PASR2 8Lx4PASR2 10Lx4PASR2 12Lx6PASR2 PASR2 18Lx10PASR2 22Lx12PASR2 28Lx16PASR2 35Lx20PASR2 42Lx32PASR2 6Sx4PASR2 8Sx4PASR2 10Sx4PASR2 12Sx6PASR2 PASR2 PASR2 20Sx10PASR2 20Sx12

25Sx12PASR2 25Sx16PASR2 30Sx16PASR2 38Sx20PASR2 38Sx24

35,335,435,338,2

46,547,15456,561,535,335,435,338,2

46,547,152,156,556,561,561,5

1/21/21/25/813,1611.1/81.3/81.7/82.1/41/21/21/25/813/1613/1611.1/81.1/81.3/81.3/81.7/81.7/8

9/1611/163/47/81.1/161.1/41.3/81.5/822.3/811/163/47/815/161.1/161.1/41.3/81.3/81.3/41.3/422.3/82.3/8

Part #T I EX2EX1

L

S

Const.Serie

Tubes ( T ) Metrics

1 – To order Stainless Steel add the letter “I” in code.Ex PASR2 12L-Ix8, PASR2 9,5-Ix6.2 – The assembly working pressure is limited by the hose pressure.3 – On request we can provide the hose fittings with different sizes combination as not seen on the table above:Ex. PASR2 12,7x8, PASR2 16Sx12, PASR2 12Sx10, PASR2 10Lx8.

Hose #

Print�Page

Print�Chapter

138


Onlinequotation




139

FEMALE METRIC SWIVEL WITH O’RING (DKO) 90° ELBOW

Important:

I

EX2ØT

C


6810121518222835426810121416202025 25303838

-4-4-4-6-8-10-12-16-20-32-4-4-4-6-8-8-10-12-12-16-16-20-24

16Sx90x8 20Sx90x10 20Sx90x12 25Sx90x12 25Sx90x16

PASR2 PASR2 PASR2 PASR2 PASR2 PASR2 PASR2 PASR2 PASR2 PASR2 PASR2 PASR2 PASR2 PASR2 PASR2 PASR2 PASR2 PASR2 PASR2 PASR2 PASR2 PASR2 PASR2

18Lx90x10 22Lx90x12

6Lx90x4 8Lx90x4 10Lx90x4 12Lx90x6 15Lx90x8

28Lx90x16 35Lx90x20 42Lx90x32 6Sx90x4 8Sx90x4 10Sx90x4 12Sx90x6 14Sx90x8

30Sx90x16 38Sx90x20 38Sx90x24

33,541,547,55156,5

76,5 82,5

114,5125,5135,533,541,547,55158,5

62,5 81,5 81,5 91,5 94,5

124,5135,5135,5

30,537414553606610011012030,5374145525465658080110120120

9/1611/163/47/81.1/161.1/41.3/81.5/822.3/811/163/47/815/161.1/161.1/41.3/81.3/81.3/41.3/422.3/82.3/8

Part #T I EX2C

L

S

Const.Serie

Tubes ( T ) Metrics

1 – To order Stainless Steel add the letter “I” in code.Ex PASR2 12L-Ix90x6, PASR2 16S-Ix90x8.2 – The assembly working pressure is limited by the hose pressure.3 – On request we can provide the hose fittings with different sizes combination as not seen on the table above:Ex. PASR2 12,7x90x8, PASR2 16Sx90x12, PASR2 12Sx90x10, PASR2 10Lx90x8.

Hose #

Print�Page

Print�Chapter


Onlinequotation





METRIC STANDPIPES

I

EX1

ØT

Important:

6810121415161820202225 25283035383842

-4-4-4-6-8-8-8-10-10-12-12-12-16-16-16-20-20-24-32

PLR2 6x4PLR2 8x4PLR2 10x4PLR2 12x6PLR2 14x8PLR2 15x8PLR2 16x8PLR2 18x10PLR2 20x10PLR2 20x12PLR2 22x12PLR2 25x12PLR2 25x16PLR2 28x16PLR2 30x16PLR2 35x20PLR2 38x20PLR2 38x24PLR2 42x32

35,335,435,338,239,9 39,944,946,546,547,147,152,156,55456,556,561,561,561,5

1/21/21/25/813/1613,1613/16111.1/81.1/81.1/81.3/81.3/81.3/81.7/81.7/81.7/82.1/4

Part #T I EX1

Tubes ( T ) Metrics

1 – To order Stainless Steel add the letter “I” in code.Ex PLR2 12-Ix6.2 - To request Nut/Cutting Ring pre-crimped, add "M" at the code beginning. Ex MPLR2 20Sx12, MPLR2 25x16.3 – The assembly working pressure is limited by the hose pressure.4 – On request we can provide the hose fittings with different sizes combination as not seen on the table above:Ex PLR2 12x8, PLR2 16x12, PLR2 12x10, PLR2 10x8.

Hose #

Print�Page

Print�Chapter

140


Onlinequotation




METRIC STANDPIPES 90° ELBOW

Important:

I

ØT

C


681012141516182020222525283035383842

-4-4-4-6-8-8-8-10-10-12-12-12-16-16-16-20-20-24-32

PCRPCRPCR2 PCR2 PCR2 PCR2 PCR2 PCR2 PCR2 PCR2 PCR2 PCR2 PCR2 PCR2 PCR2 PCR2 PCR2 PCR2 PCR2

2 6x42 8x4

10x412x614x815x816x818x1020x1020x1222x1225x1225x1628x1630x1635x2038x2038x2442x32

33,541,547,55158,556,562,576,581,581,582,591,594,5114,5124,5125,5135,5135,5135,5

Part #T I

30,5374145525354606565668080100110110120120120

C

Tubes ( T ) Metrics

1 – To order Stainless Steel add the letter “I” in code.Ex PCR2 12-Ix6.2 - To request Nut/Cutting Ring pre-crimped, add "M" at the code beginning. Ex MPCR2 20Sx12, MPCR2 25x16.3 – The assembly working pressure is limited by the hose pressure.4 – On request we can provide the hose fittings with different sizes combination as not seen on the table above:Ex. PCR2 12x8, PCR2 16x12, PCR2 12x10, PCR2 10x8.

Hose #

Print�Page

Print�Chapter

141

Online�quotation(High�Pressure)

Online�quotation(Mean�pressure)




http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=102&category_id=13&keyword=Terminal+Prensado&option=com_virtuemart&Itemid=7



A

.

MALE NPT PIPE

I

EX1

1/8-27

1/4-181/4-18

3/8-18

3/8-18

1/2-141/2-143/4-141/2-143/4-143/4-141-11.1/21.1/4-11.1/21.1/2-11.1/22-11.1/2

-4

-4 -6

-6

-8

-8 -10 -10 -12 -12 -16 -16 -20 -24 -32

PMR2 1/8 NPTx4

PMR2 1/4 NPTx4PMR2 1/4 NPTx6

PMR2 3/8 NPTx6

PMR2 3/8 NPTx8

PMR2 1/2 NPTx8PMR2 1/2 NPTx10PMR2 3/4 NPTx10PMR2 1/2 NPTx12PMR2 3/4 NPTx12PMR2 3/4 NPTx16PMR2 1 NPTx16PMR2 1.1/4 NPTx20PMR2 1.1/2 NPTx24PMR2 2 NPTx32

10

14,214,2

14,2

14,2

191919 191919242525,526

24

2930,5

30,5

32

38,538,538,5 38,5

,38 5455056,555,559,5

1/2

11/165/8

11/16

13/16

7/815/161.1/161.1/81.1/81.3/81.3/81.7/822.1/2

Part # I EX1NPT A

1/8-28 23,5 9/16

1/4-19 29 3/4

1/4-19 30 3/4

3/8-19 30,5

3/8-19 34

1/2-14 34,5 1/2-14 36,5

7/8

7/8

1.1/161.1/16

3/4-14 38,5 1.1/41/2-14 33,5 1.1/83/4-14 33,5 1.1/43/4-14 44,5 1.3/81-11 46,5 1.1/21.1/4-11 51,5 21.1/2-11 55 2.1/42-11

-4

-4

-6

-6

-8

-8 -10 -10 -12 -12 -16 -16 -20 -24 -32

PMR2 1/8 BSPx4

PMR2 1/4 BSPx4

PMR2 1/4 BSPx6

PMR2 3/8 BSPx6

PMR2 3/8 BSPx8

PMR2 1/2 BSPx8PMR2 1/2 BSPx10PMR2 3/4 BSPx10PMR2 1/2 BSPx12PMR2 S3/4 B Px12PMR2 3/4 BSPx16PMR2 1 BSPx16PMR2 1.1/4 BSPx20PMR2 1.1/2 BSPx24PMR2 2 BSPx32

8

12

12

12

12

14 14 1614161618202224 61 2.3/4

Part # I EX1BSP A

MALE THREAD BSP

I

EX1

A

A

Important:

1 – To order Stainless Steel add the letter “I” in code.Ex PMR2 1/4 NPT-Ix6, PMR2 1/4 BSP-Ix6.2 – The assembly working pressure is limited by the hose pressure.3 – On request we can provide the hose fittings with different sizes (thread, hose side) combination, as not seen on the table above.We also provide the BSP Taper (BSPT), and Metric Taper (MK).

Hose #

Hose #

Print�Page

Print�Chapter

142


Onlinequotation

Onlinequotation



http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=155&category_id=13&keyword=&option=com_virtuemart&Itemid=1

http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=156&category_id=13&keyword=terminal+macho+bsp&option=com_virtuemart&Itemid=1

Onlinequotation




Important:

I

.

M12X1,5

M18X1,5

M22X1,5M27X2M33X2M42X2M48X2M60X2M60X2

-4

-6

-8 -10 -12 -16 -20 -24 -32

PMR2 M12x1,5x4

PMR2 M18x1,5x6

PMR2 M22x1,5x8PMR2 M27X2x10PMR2 M33x2x16PMR2 M42x2x16PMR2 M48x2x20PMR2 M60x2x24PMR2 M60x2x32

12

12

14161820222424

28

28

34,537,537,584 ,5

51,55561

11/16

15/16

1.1/161.1/41.5/822.1/42.3/42.3/4

Hose Part # I EX1METRIC AMALE THREAD METRIC

1.5/8-12 -20

9/16-18

9/16-18

7/8-14

7/8-141.1/16-121.5/16-12

1.7/8-121.7/8-12

-4

-6

-8

-10 -12 -16

-24 -32

PMR2 9/16 UNFx4

PMR2 9/16 UNFx6

PMR2 7/8 UNFx8

PMR2 7/8 UNFx10 PMR2 1.1/16 UNFx12 PMR2 1.5/16 UNFx16 PMR2 1.5/8 UNFx20 PMR2 1.7/8 UNFx24 PMR2 1.7/8 UNFx32

10

10

12,7

12,7 15 15 15 15 15

28

27,5

30,5

28 34,5 37 41,5 4551

11/16

11/16

1

11.1/41.1/21.3/422

Hose Part # I EX1UNF AMALE THREAD UNF

I

EX1

A

EX1

A

I

1 – To order Stainless Steel add the letter “I” in code.Ex PMR2 M18X1,5-Ix6, PMR2 9/16 UNF-Ix4.2 – The assembly working pressure is limited by the hose pressure.3 – On request we can provide the hose fittings with different sizes (thread, hose side) combination, as not seen on the table above.We also provide the BSP Taper (BSPT), and Metric Taper (MK).

#

#

Print�Page

Print�Chapter

143




http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=105&category_id=13&keyword=terminal+macho&option=com_virtuemart&Itemid=1

http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=157&category_id=13&keyword=metrica&option=com_virtuemart&Itemid=1

http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=158&category_id=13&keyword=terminal+macho+unf&option=com_virtuemart&Itemid=1

Onlinequotation


240154-4-4 27

240154-5-4 28,4240154-6-4 28,4

240154-4-6 29,9

240154-6-6 31,3240154-10-6

240154-6-8

240154-8-8

36

33

3 ,5 7

240154-10-8 37,7

240154-8-10 37,3240154-10-10 39,3240154-12-10 41,7

240154-8-12 37,9

240154-12-12 42,3240154-16-12 43,6240154-12-16 46,7240154-16-16 48240154-16-20 45240154-20-20 56,2240154-24-24 59,4

7/16-20

1/2-209/16-18

7/16-20

9/16-187/8-14

9/16-18

3/4-16

7/8-14

3/4-167/8-141.1/16-12

3/4-16

1.1/16-121-5/16-121.1/16-121-5/16-121-5/16-121.5/8-121.7/8-122.1/2-12

-4

-5 -6

-4

-6 -10

-6

-8

-10

-8 -10 -12

-8

-12 -16 -12 -16 -16 -20 -24 -32

-4

-4-4

-6

-6-6

-8

-8

-8

-10-10-10

-12

-12-12-16-16-20-20-24-32 240154-32-32 72,4

#

HosePart # I


I

Th

re

ad

U

NF

UNF #

Important:

210154-4-4 28,7

210154-5-4 28,7

210154-6-4 28,9210154-6-6 30,2

210154-10-6 35,4

210154-6-8 31,9

210154-8-10 38,6

210154-10-10 42

210154-12-10 39210154-12-12 43,1210154-16-12 47,1210154-12-16 45,5210154-16-16 49,5210154-20-20 52,5210154-24-24 52,5

7/16-20

1/2-209/16-189/16-18

7/8-14

9/16-18

3/4-16

7/8-141.1/16-121.1/16-121.5/16-121.1/16-121.5/16-121.5/8-121.7/8-122.1/2-12

-4

-5 -6 -6

-10

-6

-8

-10 -12 -12 -16 -12 -16 -20 -24 -32

-4

-4-4-6

-6

-8

-10

-10-10-12-12-16-16-20-24-32 210154-32-32 65,5

#

Hose

Part # IUNF #

MALE JIC 37°

Thread UNF

I

JIC 37°

1 – To order Stainless Steel add the letter “S” in code.Ex 210154-10-8 S, 240154-8-8 S.2 – The assembly working pressure is limited by the hose pressure.3 – On request we can provide the hose fittings with different size combination, as not seen on the table above.

Print�Page

Print�Chapter

144


Onlinequotation

http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=160&category_id=13&keyword=terminal+macho+jic&option=com_virtuemart&Itemid=7



http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=159&category_id=13&keyword=terminal+macho+jic&option=com_virtuemart&Itemid=7

145


Important:

240354-4-4 31,7 8,4

240354-5-4 33 9,1

240354-6-4 34,6 10

240354-6-6 ,34 5 10

240354-8-6 39,8 14

240354-8-8 46 14

240354-10-8 46,5 16240354-10-10 48,6 16240354-12-10 58,2 19,8240354-12-12 58,3 19,8240354-14-12 63 21,4240354-16-16 65,3 22,6240354-20-20 74,5 28,1240354-24-24 79,5 30,5

7/16-20

1/2-20

9/16-18

9/16-18

3/4-16

3/4-16

7/8-14 7/8-14 1.1/16-12 1.1/16-12 1.3/16-12 1.5/16-12 1.5/8-12 1.7/8-12 2.1/2-12

-4

-5

-6

-6

-8

-8

-10 -10 -12 -12 -14 -16 -20 -24 -32 240354-32-32 125 53

-4

-4

-4

-6

-6

-8

-8 -10 -10 -12 -12 -16 -20 -24 -32

Part # IUNF #

FEMALE JIC 37° SWIVEL 45° ELBOW

I

C

ThreadUNF

C

Part # IUNF

-4 -4 241454-4-4 28,8 17,2

-5 -4 241454-5-4 30,3 19,6

-6 -4 241454-6-4 32 21,6-6 -6 241454-6-6 32 21,6

-8 -6 241454-8-6 35,2 27,7

-8 -8 241454-8-8 41,4 27,7

-10 -8 241454-10-8 43,4 31,2

-10 -10 241454-10-10 45,5 31,2

-12 -10 241454-12-10 55,2 46,2-12 -12 241454-12-12 59,3 46,2-14 -12 241454-14-12 57,5 50,8-16 -16 241454-16-16 61,2 54,3-20 -20 241454-20-20 ,78 5 65,5-24 -24 241454-24-24 80 74

7/16-20

1/2-20

9/16-18 9/16-18

3/4-16

3/4-16

7/8-14

7/8-14

1.1/16-12 1.1/16-12 1.3/16-12 1-5/16-12 1.5/8-12 1.7/8-12 2.1/2-12 -32 -32 241454-32-32 121,5 125


C

I

ThreadUNF

C

Part # IUNF

-4 -4 28,8 45,7

-5 -4 30,3 45,7-6 -4 32 55,3-6 -6 32 55,3

-8 -6 35,2 61,7

-8 -8 41,4 61,7

-10 -8 43,4 65,3

-10 -10 43,5 65,3-12 -10 55,2 94,7-12 -12 59,3 94,7-14 -12 57,5 99,8-16 -16 61,3 110

7/16-20

1/2-20 9/16-18 9/16-18

3/4-16

3/4-16

7/8-14

7/8-14 1.1/16-12 1.1/16-12 1.3/16-12 1-5/16-12 1.5/8-12 -20 -20

241554-4-4

241554-5-4241554-6-4241554-6-6

241554-8-6

241554-8-8

241554-10-8

241554-10-10241554-12-10241554-12-12241554-14-12241554-16-16241554-20-20 88,5 134

LONG FEMALE JIC 37° SWIVEL 90° ELBOW

C

I

ThreadUNF

C

1 – To order Stainless Steel add the letter “S” in code.Ex 240354-8-8 S, 241454-8-8 S, 241554-12-12 S.2 – The assembly working pressure is limited by the hose pressure.3 – On request we can provide the hose fittings with different size combination, as not seen on the table above.

Hose #

Hose #

#

Hose #

#

Print�Page

Print�Chapter





Online�quotation(Low�Pressure)





http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=111&category_id=13&keyword=terminal+femea&option=com_virtuemart&Itemid=7



http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=118&category_id=13&keyword=Terminal+90%C2%B0+Flange+SAE&option=com_virtuemart&Itemid=7



OnlinequotationOnline

quotation

Onlinequotation

Onlinequotation


Important:

1 – To order Stainless Steel add the letter “S” in code.Ex PFR2 3/4-Ix8, PFR2 3/4-Ix45x8, PFR2 3/4-Ix90x8.2 – The assembly working pressure is limited by the hose pressure.3 – On request we can provide the hose fittings with different size combination, as not seen on the table above.

PFR2 3/4x8 50,4 38

PFR2 3/4x10 51,7 38

PFR2 3/4x12 51,8 38

PFR2 1x12 52,8 44,6

PFR2 1x16 55,7 44,6

PFR2 1.1/4x20 57,7

PFR2 1.1/2x20 65,3

PFR2 1.1/2x24 66

51

60,5

60,5

3/4

3/4

3/4

1

1

1.1/4

1.1/2

1.1/2

2

-8

-10

-12

-12

-16

-20

-20

-24

-32 PFR2 2x32 66,5 71,6

Part # ISAE CODE 61 FLANGE STRAIGHT

I

ØD

FlangeØD

Hose #Size

58,6 21,3

64,2 22,7

66,8 25,4

38

38

38

67,1 25,4 44,6

73,8 27,2 44,6

80 29,3 51

81,1 30,4 60,5

95 36 ,60 5

3/4

3/4

3/4

1

1

1.1/4

1.1/2

1.1/2

2

-8

-10

-12

-12

-16

-20

-20

-24

-32

3/4x45x8

3/4x45x10

3/4x45x12

1x45x12

1x45x16

1.1/4x45x20

1.1/2x45x20

1.1/2x45x24

PFR2

PFR2

PFR2

PFR2

PFR2

PFR2

PFR2

PFR2

PFR2 2x45x32 128 49,5 71,6

I CSAE CODE 61 FLANGE 45° ELBOW

I

ØD

C

ØDFlangeSize

Hose

# Part #

-8 48,4 43,2 38

-10 48,5 43,2 38

-12 57,6 52,2 38

-12 57,6 52,2 44,6

-16 68,5 60,2 44,6

-20 76,5 67,2 51

-20 76,5 68,8 60,5

-24 87 79 60,5

3/4

3/4

3/4

1

1

1.1/4

1.1/2

1.1/2

2 -32

PFR2

PFR2

PFR2

PFR2

PFR2

PFR2

PFR2

PFR2

PFR2

3/4x90x8

3/4x90x10

3/4x90x12

1x90x12

1x90x16

1.1/4x90x20

1.1/2x90x20

1.1/2x90x24

2x90x32 122 114 71,6

I CSAE CODE 61 FLANGE 90° ELBOW

IØD

C

ØDFlangeSize

Hose

# Part #

Print�Page

Print�Chapter

146







147

100R5 - MEDIUM PRESSURE HYDRAULIC HOSE

#mm m

Inch. ID ODm

Pressure WPbar psi

Pressure BPbar psi

-4 3/16” 4,8 13,2 210 840 75-5 1/4” 6,4 14,8 210 840 85-6 5/16” 7,9 17,1 157 630 100-8 13/32” 10,3 19,4 140 560 115-10 1/2” 12,7 23,3 122 490 140-12 5/8” 15,9 27,3 105 420 165-16 7/8” 22,2 31,2 56 224 185-20 1.1/8” 28,6 38,0 43 175 229-24 1.3/8” 34,9 44,3 35 140 265-32 1.13/16” 46,0 56,1 24

304030402270203017601520810625500350 98

121801218091308120710060903250253020301420 335


Specifications: SAE 100 R5

Construction: Inner Tube: Synthetic Rubber

Reinforcement: A twisted steel and a braided yarn are

separated by a rubber layer.

Coverage: A twisted yarn, impregnated with synthetic

rubber.

Important:


Female JIC 37° SwivelFemale JIC 37°

Swivel 45° Elbow

Female JIC 37°

Swivel 90° Elbow

Female JIC 37°

Swivel 90° Elbow (Long)250146 250346 251446 251546Page 154 Page 155 Page 155 Page 155


Male Taper

NPT, BSPT e Metric Taper

TMR5

Male Parallel

BSP, METRIC and UN/UNF

TMR5

Male JIC 37°220146

Page 154Page 152 Page152/153

METRIC STANDPIPES

Metric Standpipes Metric Standpipes 90° ElbowTLR5 - Page 151 TCR5 - Page 151

Male 24°

DIN 8434-1 - TTR5

Female Metric Swivel

With O’ring (DKO) - TASR5

Female Metric Swivel With

O’ring (DKO) - 90° ElbowPage 148 149Page TASR5 - Page 150


Standard Supply Hose fitting in Carbon Steel. The hose fittings can also be supplied in Stainless Steel or Brass (See how to request each item)


Min.BendRadius mm

Print�Page

Print�Chapter

Onlinequotation



















I

EX1EX2

ØT

EX3

Important:

6 TTR5 6Lx4 28 1/2 9/16 5/8

8 TTR5 8Lx5 32 9/16 11/16 3/4

10 TTR5 10Lx6 31 11/16 3/4 13/16

12 TTR5 12Lx6 31 7/8 7/8 13/16

12 TTR5 12Lx8 34 13/16 7/8 15/16

15 TTR5 15Lx10 35 7/8 1.1/16 1.1/818 TTR5 18Lx12 37 1.1/16 1.1/4 1.1/422 TTR5 22Lx12 37 1.1/4 1.3/8 1.1/428 TTR5 28Lx16 35 1.5/8 1.5/8 1.1/235 -20 TTR5 35Lx20 38,5 1.7/8 2 1.3/442 TTR5 42Lx32 49 2.1/4 2.3/8 2.1/26 TTR5 6Sx4 28 1/2 11/16 5/88 TTR5 8Sx5 32 9/16 3/4 3/410 TTR5 10Sx6 31 11/16 7/8 13/1612 TTR5 12Sx6 31 7/8 15/16 13/1612 TTR5 12Sx8 34 13/16 15/16 15/1614 TTR5 14Sx8 34 7/8 1.1/16 15/1616 TTR5 16Sx10 35 1 1.1/4 1.1/820 TTR5 20Sx12 37 1.1/4 1.3/8 1.1/425 -12 TTR5 25Sx12 38,5 1.3/8 1.3/4 1.1/425 TTR5 25Sx16 35 1.3/8 1.3/4 1.1/230

-4

-6

-4

-5

-6

-8

-10 -12 -12 -16

-32

-5 -6 -6 -8 -8 -10 -12

-16 -16 TTR5 30Sx16 36 1.3/4 2 1.1/2

38 -20 TTR5 38Sx20 39,5 2 2.3/8 1.3/438 -24 TTR5 38Sx24 38,5 2 2.3/8 2

#

HosePart #T I EX2EX1

L

S

Const.Serie

EX3

Tubes ( T ) Metric

1 - To order Stainless Steel, add the letter "I" and to order Brass add the letter "C" in code.Ex TTR5 12L-Ix8, TTR5 16S-Cx10, TTR5 9,5-Ix6, TTR5 12,7-Cx8.2 – The assembly working pressure is limited by the hose pressure.3 – On request we can provide the hose fittings with different size combination, as not seen on the table above.Ex. TTR5 12,7x16, TTR5 16Sx12, TTR5 12Sx10, TTR5 10Lx8.

Print�Page

Print�Chapter

148


Onlinequotation




149



Important:

ØT

I

EX1EX2EX3

6 42 7/16 9/16 5/8

8 42 7/16 11/16 3/4

10 41 1/2 3/4 13/16

12 41 5/8 7/8 13/16

12 5/8 7/8 15/16

15

44

44 3/4 1.1/16 1.1/818 51 7/8 1.1/4 1.1/422 15/16 1.3/8 1.1/428 1.1/8 1.5/8 /1.1 235

5154,5

,54 5 1.1/2 2 1.3/442 64 2.1/4 /2.3 8 /2.1 2

6 42 7/16 11/16 5/88 42 7/16 3/4 3/410 41 1/2 7/8 13/1612 41 1/2 15/16 13/1612 44 5/8 15/16 15/16

14 44 5/8 1.1/16 15/1616 49 3/4 1.1/4 1.1/820 51 7/8 1.3/8 1.1/425 58 1.1/16 1.3/4 1.1/425 54,5 1.1/8 1.3/4 1.1/230 1.1/4 2 1.1/238

54,561,5 2.3/8 1.3/4

38

-4

-5

-6

-6

-8

-10 -12 -12 -16 -20 -32

-4 -5 -6 -6 -8 -8 -10 -12 -12 -16 -16 -20 -24

TASR5 6Lx4

TASR5 8Lx5

TASR5 10Lx6

TASR5 12Lx6

TASR5 12Lx8

TASR5 15Lx10TASR5 18Lx12TASR5 22Lx12TASR5 28Lx16TASR5 35Lx20TASR5 42Lx32

TASR5 6Sx4TASR5 8Sx5TASR5 10Sx6TASR5 12Sx6TASR5 12Sx8

TASR5 14Sx8TASR5 16Sx10TASR5 20Sx12TASR5 25Sx12TASR5 25Sx16TASR5 30Sx16TASR5 38Sx20TASR5 38Sx24 61,5

1.5/81.5/8 2.3/8 2

#Hose Part #T I EX2EX1

L

S

Const.Serie

EX3

Tubes ( T ) Metric

1 - To order Stainless Steel, add the letter "I" and to order Brass add the letter "C" in code.Ex TASR5 12L-Ix8, TASR5 16S-Cx10, TASR5 12,7-Ix8, TASR5 9,5-Cx6.2 – The assembly working pressure is limited by the hose pressure.3 – On request we can provide the hose fittings with different size combination, as not seen on the table above.Ex. TASR5 12,7x16, TASR5 16Sx12, TASR5 12Sx10, TASR5 10Lx8.

Print�Page

Print�Chapter


Onlinequotation





ØTI

CEX2

EX1EX3


Important:

6 -4 TASR5 6Lx90x4 30,5 37 7/16 9/16 5/8

8 -5 TASR5 8Lx90x5 37 47 1/2 11/16 3/410 -6 TASR5 10Lx90x6 41 52 5/8 3/4 13/16

12 -6 TASR5 12Lx90x6 45 56 5/8 7/8 13/16

12 -8 TASR5 12Lx90x8 63 11/16 7/8 15/1615 -10 TASR5 15Lx90x10

4553 62 13/16 1.1/16 1.1/8

18 -12 TASR5 18Lx90x12 60 82 1 1.1/4 1.1/422 -12 TASR5 22Lx90x12 66 88 1 1.3/8 1.1/428 -16 TASR5 28Lx90x16 100 113,5 1.1/4 1.5/8 1.1/235 -20 TASR5 35Lx90x20 110 124,5 1.3/4 2 1.3/442 -32 TASR5 42Lx90x32 135 152,5 2.1/4 2.3/8 2.1/26 -4 TASR5 6Sx90x4 30,5 37 7/16 11/16 5/88 -5 TASR5 8Sx90x5 37 47 1/2 3/4 3/410 -6 TASR5 10Sx90x6 41 52 5/8 7/8 13/1612 -6 TASR5 12Sx90x6 45 56 5/8 15/16 13/1612 -8 TASR5 45 63 11/16 15/16 15/1614 -8 TASR5 52 64 11/16 1.1/16 15/1616 -10 TASR5 54 68 13/16 1.1/4 1.1/820 -12 TASR5 65 87 1 1.3/8 1.1/425 -12 TASR5

12Sx90x814Sx90x816Sx90x1020Sx90x1225Sx90x12 80 97 1 1.3/4 1.1/4

25 -16 TASR5 25Sx90x16 80 93,5 1.1/4 1.3/4 1.1/230 -16 TASR5 30Sx90x16 110 123,5 1.1/4 2 1.1/238 -20 TASR5 38Sx90x20 120 134,5 1.3/4 2.3/8 1.3/438 -24 TASR5 38Sx90x24 120 134,5 1.7/8 2.3/8 2

#Hose Part #T C EX2EX1

L

S

Const.Serie

EX3I

Tubes ( T ) Metric

1 - To order Stainless Steel, add the letter "I" and to order Brass add the letter "C" in code.Ex TASR5 12L-Ix90x8, TASR5 16S-Cx90x10, TASR5 9,5-Ix90x6.2 – The assembly working pressure is limited by the hose pressure.3 – On request we can provide the hose fittings with different size combination, as not seen on the table above.Ex. TASR5 12,7x90x16, TASR5 16Sx90x12, TASR5 12Sx90x10, TASR5 10Lx90x8.

Print�Page

Print�Chapter

150


Onlinequotation



http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=122&category_id=13&keyword=terminal&option=com_virtuemart&Itemid=7


Important:

42 7/16 5/842 7/16 3/441 1/2 13/16

41 1/2 13/16

44 5/8 15/1644 5/844 3/44951

3/47/8

15/161.1/81.1/81.1/4

7/8 1.1/45151 15/16 1.1/458 1.1/16 1.1/454,5 1.1/8 1.1/254,5 1.1/8 1.1/254,5 1.1/4 1.1/254,5 1.3/461,5

1.1/21.5/8

61,5 1.5/8

6

8101212

141516

18202225 -1225 -1628 -1630 -1635 -2038 -2038 -2442 -32

-4 -5 -6 -6 -8 -8 -10

-10 -12

-12 -12

TLR5 6x4

TLR5 8x5TLR5 10x6TLR5 12x6TLR5 12x8TLR5 14x8

TLR5 15x10 TLR5 16x10 TLR5 18x12

TLR5 20x12TLR5 22x12

TLR5 25x12 TLR5 25x16

TLR5 28x16 TLR5 30x16 TLR5 35x20 TLR5 38x20

TLR5 38x24

TLR5 42x32 64 2.1/4

1.3/422.1/2

#Hose

Part #T I EX1 EX3

METRIC STANDPIPES

ØT

I

EX1EX3

-4 37 30,5 7/16 5/85/83/413/1613/16

-6 56 45 5/8

13/16-8 63 45 11/16

15/1615/16

-8 64 52 11/16

15/16

-10 62 53 13/16

1.1/8

-10 68 54 13/16

1.1/8

-12 82 60 1

1.1/41.1/4

-12 65 1

1.1/4

-12

8788 66 1

1.1/4

-12 97 80 1-16 93,5 80 1.1/4-16 113,5 100 1.1/4-16 123,5 110 1.1/4-20 124,5 110 1.3/4 1.3/4-20 134,5 120 1.3/4 1.3/4-24 134,5 120 1.7/8 2

68 -5 TCR5 8x5 47 37 1/2

10 -6 TCR5 10x6 52 41 5/812121415

161820

222525283035383842 -32

15x10

16x1018x1220x12

22x1225x12

TCR5 25x1628x1630x1635x2038x2038x24

TCR5 6x4

TCR5 12x6TCR5 12x8TCR5 14x8TCR5

TCR5 TCR5 TCR5

TCR5 TCR5

TCR5 TCR5 TCR5 TCR5 TCR5 TCR5 42x32 152,5 135 2.1/4 2.1/2

#Hose

Part #T I C EX1 EX3METRIC STANDPIPES 90° ELBOW

ØTI

EX1EX3

C

1 – The assembly working pressure is limited by the hose pressure.2 – On request we can provide the hose fittings with different size combination, as not seen on the table above.Ex. TLR5 12,7x16, TLR5 16x12, TCR5 12x10, TCR5 10x8.

To order Stainless Steel, add the letter "I", and to order Brass add the letter "C" in code.Ex TCR5 12-Ix8, TCR5 16-Cx10.

To order Stainless Steel, add the letter "I", and to order Brass add the letter "C" in code.Ex TLR5 12-Ix8, TLR5 16-Cx10.

Print�Page

Print�Chapter

151


Onlinequotation

Onlinequotation





Onlinequotation

Onlinequotation


Important:

TMR5 1/8 NPTx4 25 7/16 5/8

TMR5 1/4 NPTx4 29 9/16 5/8

TMR5 3/8 NPTx4 29 11/16 5/8

TMR5 3/8 NPTx5 32 11/16 3/4

TMR5 1/4 NPTx6 31 5/8 13/16

TMR5 3/8 NPTx6 31 11/16 13/16

TMR5 3/8 NPTx8 34,5 11/16 15/16

TMR5 1/2 NPTx8 40 7/8 15/16TMR5 1/2 NPTx10 40 7/8 1.1/8TMR5 3/4 NPTx10 41 1.1/8 1.1/8TMR5 1/2 NPTx12 40 1 1.1/4TMR5 3/4 NPTx12 40 1.1/16 1.1/4TMR5 1 NPTx12 47 1.3/8 1.1/4TMR5 3/4 NPTx16 38,5 1.1/4 1.1/2TMR5 1 NPTx16 43,5 1.3/8 1.1/2TMR5 1 NPTx20 43,5 1.1/2 1.3/4TMR5 1.1/4 NPTx20 44,5 1.3/4 1.3/4TMR5 1.1/4 NPTx24 46,5 1.3/4 2

1/8-27

1/4-18

3/8-18

3/8-18

1/4-18

3/8-18

3/8-18

1/2-141/2-143/4-141/2-143/4-141-11.1/23/4-141-11.1/21-11.1/21.1/41.1/41.1/2

-4

-4

-4

-5

-6

-6

-8

-8 -10 -10 -12 -12 -12 -16 -16 -20 -20 -24 -24 TMR5 1.1/2 NPTx24 47 2 2

2 -32 TMR5 2 NPTx32 52 2.1/2 2.1/2

#Hose Part # I EX1NPT EX3MALE NPT PIPE

I

EX1EX3

Th

re

ad

NP

T

1/8-28 TMR5 1/8 BSPx4 24,5 9/16

1/4-19 TMR5 1/4 BSPx4 29 3/4

3/8-19 TMR5 3/8 BSPx4 29,5 7/8

3/8-19 TMR5 3/8 BSPx5 33 3/41/4-19 TMR5 1/4 BSPx6 3/4

3/8-19 TMR5 3/8 BSPx6

/3 8-19 TMR5 3/8 BSPx8

32

32,5

35,5

7/8

7/8

1/2-14 TMR5 1/2 BSPx8 38 1.1/161/2-14 TMR5 1/2 BSPx10 39 1.1/163/4-14 TMR5 3/4 BSPx10 40 1.1/41/2-14 TMR5 1/2 BSPx12 38 1.1/163/4-14 TMR5 3/4 BSPx12 40 1.1/41-11 TMR5 1 BSPx12 42 1.5/83/4-14 TMR5 3/4 BSPx16 38,5 1.1/41-11 TMR5 1 BSPx16 40,5 1.5/81.1/4-11 TMR5 1.1/4 BSPx20 ,42 5 21.1/4-11 TMR5 1.1/4 BSPx24 43,5 21.1/2-11 TMR5 1.1/2 BSPx24 45,5 2.1/42-11

-4

-4

-4

-5 -6

-6

-8

-8 -10 -10 -12 -12 -12 -16 -16 -20 -24 -24 -32 TMR5 2 BSPx32 53,5 2.3/4

5/8

5/8

5/8

3/413/16

13/16

15/16

15/161.1/81.1/81.1/41.1/41.1/41.1/21.1/21.3/4222.1/2

#Hose Part # I EX1BSP EX3MALE PARALLEL BSP

I

EX1EX3

Th

re

ad

BS

P

1 – The assembly working pressure is limited by the hose pressure.2 – On request we can provide the hose fittings with different size combination, as not seen on the table above.We also provide the BSP Taper (BSPT) and Metric Taper (MK).

To order Stainless Steel, add the letter "I", and to order Brass add the letter "C" in code.Ex TMR5 1/4 BSP-Ix6, TMR5 3/4 BSP-Cx10.

To order Stainless Steel, add the letter "I", and to order Brass add the letter "C" in code.Ex TMR5 1/4 NPT-Ix6, TMR5 3/4 NPT-Cx10.

Print�Page

Print�Chapter

152






153


Important:

M12X1,5 TMR5 M12x1,5x4 31 11/16 5/8

M18X1,5 TMR5 M18x1,5x6 32 15/16 13/16

M22X1,5 TMR5 M22x1,5x8 38 1.1/16 15/16M27X2 TMR5 M27X2x10 42 1.1/4 1.1/8M33X2 TMR5 M33x2x16 42 1.5/8 1.1/4M42X2

-4

-6

-8 -10 -12 -16 TMR5 M42x2x16 42,5 2 1.1/2

#Hose Part # I EX1METRIC EX3

MALE THREAD METRIC

I

EX1EX3

Th

read

METR

IC

TMR5 9/16 UNFx4 29 11/16 5/8

1/2 TMR5 UNFx5 28 5/8 3/4

TMR5 9/16 UNFx6 28 11/16 13/16

TMR5 7/8 UNFx8 34 1 15/16TMR5 7/8 UNFx10 34 1 1.1/8

7/8 TMR5 UNFx12 35 1 1.1/4TMR5 1.1/16 UNFx12 34,5 1.1/4 1.1/4

9/16-18

1/2-20

9/16-18

7/8-147/8-147/8-141.1/16-121.5/16-12

-4

-5

-6

-8 -10 -12 -12 -16 TMR5 1.5/16 UNFx16 34,5 1.1/2 1.1/2

#Hose Part # I EX1UNF EX3

MALE THREAD UNF

I

EX1EX3

Th

re

ad

UN

F

1 – The assembly working pressure is limited by the hose pressure.2 – On request we can provide the hose fittings with different size combination, as not seen on the table above.We also provide the BSP Taper (BSPT) and Metric Taper (MK).

To order Stainless Steel, add the letter "I", and to order Brass add the letter "C" in code.Ex TMR5 9/16 UNF-Ix4, TMR5 7/8 UNF-Cx8.

To order Stainless Steel, add the letter "I", and to order Brass add the letter "C" in code.Ex TMR5 M12X1,5-Ix4, TMR5 M22X1,5-Cx8.

Print�Page

Print�Chapter


Onlinequotation

Onlinequotation






33,7

35,1

250146-4-4

250146-5-4

250146-6-4

250146-5-52 0 6 65 14 - -5

250146-4-6

35,1

37,137,1

35,2

250146-5-6 36,6250146-6-6 36,6

250146-6-8 41,6

250146-8-8 44,3

250146-10-8 46,3

250146-10-10 46250146-12-10 48,4

250146-8-12 44

250146-12-12 48,4250146-16-12 49,7250146-12-16 45,7250146-16-16 47250146-16-20 48,5250146-20-20 57,6250146-20-24 56,6250146-24-24 58

7/16-20

1/2-20

9/16-18

1/2-209/16-18

7/16-20

1/2-209/16-18

9/16-18

3/4-16

7/8-14

7/8-141.1/16-12

3/4-16

1.1/16-121-5/16-121.1/16-121-5/16-121-5/16-121.5/8-121.5/8-121.7/8-122.1/2-12

-4

-5

-6

-5 -6

-4

-5 -6

-6

-8

-10

-10 -12

-8

-12 -16 -12 -16 -16 -20 -20 -24 -32

-4

-4

-4

-5-5

-6

-6-6

-8

-8

-8

-10-10

-12

-12-12-16-16-20-20-24-24-32 250146-32-32 75,9

#Hose Part # I


I

Th

re

ad

U

NF

UNF #

Important:

220146-4-4 28,4

220146-5-4 28,9220146-6-4 28,5

220146-5-5 28,9

220146-5-6 30,5220146-6-6 34

220146-8-8 37,4

220146-10-8

220146-8-10

39

36,941,5464143,544,542,845,1

7/16-20

1/2-209/16-18

1/2-20

1/2-209/16-18

3/4-16

7/8-14

3/4-167/8-141.1/16-121.5/16-121.5/16-121.5/8-121.5/8-121.7/8-122.1/2-12

-4

-5 -6

-5

-5 -6

-8

-10

-8 -10 -12 -16 -16 -20 -20 -24 -32

-4

-4-4

-5

-6-6

-8

-8

-10-10-12-16-20-20-24-24-32

220146-10-10220146-12-12220146-16-16220146-16-20220146-20-20220146-20-24220146-24-24220146-32-32 50

#Hose Part # IUNF #

MALE JIC 37°

Th

re

ad

U

NF

I

JIC 37°

To order Stainless Steel, add the letter "S", and to order Brass add the letter "B" in code.Ex 250146-8-8 S, 250146-6-6 B.


1 – The assembly working pressure is limited by the hose pressure.2 – On request we can provide the hose fittings with different size combination, as not seen on the table above.

Print�Page

Print�Chapter

154


Onlinequotation

Onlinequotation





155


Important:

250346-4-4 8,4

250346-5-5

43 2,

46 9,1

250346-6-6 46,8 9,9

250346-8-8 55,8 14

250346-10-10 60,4 16250346-12-12 70,2 19,8250346-16-16 73,1 22,6250346-20-20 70,4 27,9250346-24-24 72,7 27,9

7/16-20

1/2-20

9/16-18

3/4-16

7/8-14 1.1/16-12 1.5/16-12 1.5/8-12 1.7/8-12 2.1/2-12

-4

-5

-6

-8

-10 -12 -16 -20 -24 -32

-4

-5

-6

-8

-10 -12 -16 -20 -24 -32 250346-32-32 63,2 27,9

#Hose Part # I

FEMALE JIC 37° SWIVEL 45° ELBOWUNF #

I

C

ThreadUNF

C


1 – The assembly working pressure is limited by the hose pressure.

I


251446-4-4 40,7 17,2

251446-5-5 44,5 19,5251446-6-6 44,3 21,6

251446-8-8 52 27,7

251446-10-10 55,6 31,2251446-12-12 68,9 46 2251446-16-16 71,1

,54,4

251446-20-20 68,6 65 5251446-24-24 71,4

,65,5

7/16-20

1/2-20 9/16-18

3/4-16

7/8-14 1.1/16-12 1-5/16-12 1.5/8-12 1.7/8-12 2.1/2-12

-4

-5 -6

-8

-10 -12 -16 -20 -24 -32

-4

-5 -6

-8

-10 -12 -16 -20 -24 -32 251446-32-32 61,9 65,5

C

I

C


Part #UNF # #Hose

ILONG FEMALE JIC 37° SWIVEL 90° ELBOW

7/16-20 -4 -4 251546-4-4 40,7 45,7

1/2-20 -5 -5 251546-5-5 44,5 45,79/16-18 -6 -6 251546-6-6 44,3 55,4

3/4-16 -8 -8 251546-8-8 52 61,7

7/8-14 -10 -10 251546-10-10 55,6 65,31.1/16-12 -12 -12 251546-12-12 68,9 94,71.5/16-12 -16 -16 251546-16-16 71,1 1101.5/8-12 -20 -20 251546-20-20 68,6 134,11.7/8-12 -24 -24 251546-24-24 71,4 134,12.1/2-12 -32 -32 251546-32-32 61,9 134,1

C

I

C


Part #UNF # #Hose

Print�Page

Print�Chapter


Onlinequotation

Onlinequotation

Onlinequotation






#Inch ID OD.

mm mm

Pressure WP Pressure BP

bar psi bar psi

12,6 30 12014,1 30 12015,8 30 12019,4 30 12023,0 30 12026,0 30 120

-4-5-6-8-10-12-16

1/4”5/16”3/8”1/2”5/8”3/4”1”

6,47,99,512,715,919,025,4 32,0 30

426426426426426426426 120

1705170517051705170517051705

45657590115140150


100R6 - LOW PRESSURE HYDRAULIC HOSE

Specifications: SAE 100 R6 - EN 854 R6/1TE - ISO 4079-1 R6/1TE

Construction: Inner Tube: Synthetic RubberReinforcement: A twisted textile yarnCoverage: Black synthetic rubber, resistant to oil, fuel, ozone and abrasion.


Female JIC 37° Swivel2401R6

Female JIC 37° Swivel 45° Elbow - 2403R6


Female JIC 37° Swivel 90° Elbow (Long)2415R6 - Page 161 Pág. 161 Page 161 Page 161


Male JIC 37°2101R6

Page 161

Male TaperNPT, BSPT e Metric TaperTMR6Page 160

Male ParallelBSP, METRIC and UN/UNFTMR6Page 160

MALE METRIC STUD, METRIC STANDPIPES AND FEMALE METRIC SWIVEL

Male 24°DIN 8434-1 - TTR6

Metric Standpipes90° Elbow - TCR6

Female Metric Swivel With O’ring (DKO) - 90° ElbowTASR6 -

Page 157

Metric StandpipesTLR6

Page 158Page 159

Female Metric SwivelWith O’ring (DKO)TASR6 -

Page158Page 159


Min.BendRadius mm

Print�Page

Print�Chapter

156


Onlinequotation
















157

6 TTR6 6Lx4 22 1/2 9/16

8 TTR6 8Lx4 22 9/16 11/1610 TTR6 10Lx6 24 11/16 3/4

12 TTR6 12Lx6 24 13/16 7/8

12 TTR6 12Lx8 23,5 13/16 7/815 TTR6 15Lx10 26 7/8 1.1/1618 TTR6 18Lx10 27,5 1.1/16 1.1/422 TTR6 22Lx12 29 1.1/4 1.3/828 TTR6 28Lx16 30,5 1.5/8 1.5/8

6 TTR6 6Sx4 22 1/2 11/168 TTR6 8Sx4 22 9/16 3/410 TTR6 10Sx6 24 11/16 7/812 TTR6 12Sx6 24 13/16 15/1612 TTR6 12Sx8 23,5 13/16 15/1614 TTR6 14Sx8 24 7/8 1.1/1616 TTR6 16Sx10 26 7/8 1.1/420 TTR6 20Sx12 29 1.1/4 1.3/825

-4

-4 -6

-6

-8 -10 -10 -12 -16

-4 -4 -6 -6 -8 -8 -10 -12 -12 TTR6 25Sx12 30,5 1.3/8 1.3/4

#

Hose Part #T I EX2EX1

L

S

Const.Serie



I

EX1EX2

ØT

Important:

To order Stainless Steel, add the letter "I", and to order Brass add the letter "C" in code.Ex TTR6 12L-Ix8, TTR6 16S-Cx10, TTR6 12,7-Ix8, TTR6 9,5-Cx6.

1 – The assembly working pressure is limited by the hose pressure.2 – On request we can provide the hose fittings with different size combination, as not seen on the table above.Ex. TTR6 12,7x16, TTR6 16Sx12, TTR6 12Sx10, TTR6 10Lx8.

Print�Page

Print�Chapter


Onlinequotation





ØT

I

EX1EX2

FEMALE METRIC SWIVEL WITH O’RING

6 TASR6 6Lx4 32 7/16 9/16

8 TASR6 8Lx4 32 7/16 11/16

10 TASR6 10Lx6 32 1/2 3/4

12 TASR6 12Lx6 32 1/2

12 TASR6 12Lx8 32 11/16

7/8

7/8

15 TASR6 15Lx10 33 13/16 1.1/1618 TASR6 18Lx10 40 13/16 1.1/422 TASR6 22Lx12 40 15/16 1.3/828 TASR6 28Lx16 47 1.1/4 1.5/86 TASR6 6Sx4 32 7/16 11/168 TASR6 8Sx4 32 7/16 3/410 TASR6 10Sx6 32 1/2 7/812 TASR6 12Sx6 32 1/2 15/1612 TASR6 12Sx8 32 11/16 15/1614 TASR6 14Sx8 32 11/16 1.1/1616 TASR6 16Sx10 38 13/16 1.1/420 TASR6 20Sx12 40 15/16 /1.3 825

-4

-4

-6

-6

-8

-10 -10 -12 -16 -4 -4 -6 -6 -8 -8 -10 -12 -12 TASR6 25Sx12 47 1.1/16 1.3/4

#Hose

Part #T I EX2EX1

L

S

Const.Serie

ØT

I

C

EX2


6 TASR6 6Lx90x4 30,5 30,5

8 TASR6 8Lx90x4 38,5 37 11/1610 TASR6 10Lx90x6 44,5 41

12 TASR6 12Lx90x6 48,5 45

9/16

3/4

7/8

12 TASR6 12Lx90x8 52,5 45 7/815 TASR6 15Lx90x10 53,5 53 1.1/1618 TASR6 18Lx90x10 73,5 60 1.1/422 TASR6 22Lx90x12 79,5 1.3/828 TASR6 28Lx90x16 108,5

6 TASR6 6Sx90x4 30,5

66100

30,5

1 5/8.

11/168 TASR6 8Sx90x4 38,5 37 3/410 TASR6 10Sx90x6 44,5 41 7/812 TASR6 12Sx90x6 48,5 45 15/1612 TASR6 12Sx90x8 52,5 45 15/1614 TASR6 14Sx90x8 53,5 52 1.1/1616 TASR6 16Sx90x10 59,5 54 1.1/420 TASR6 20Sx90x12 78,5 65 1.3/825

-4

-4 -6

-6

-8 -10 -10 -12 -16

-4 -4 -6 -6 -8 -8 -10 -12 -12 TASR6 25Sx90x12 88,5 80 1.3/4

#

Hose Part #T I EX2C

L

S

Const.Serie

Important:

To order Stainless Steel, add the letter "I", and to order Brass add the letter "C" in code.Ex TASR6 12L-Ix8, TASR6 16S-Cx10 TASR6 12,7-Ix8, TASR6 9,5-Cx6.

To order Stainless Steel, add the letter "I", and to order Brass add the letter "C" in code.Ex TASR6 12L-Ix90x8, TASR6 16S-Cx90x10 TASR6 9,5-Ix90x6.

1 – The assembly working pressure is limited by the hose pressure.2 – On request we can provide the hose fittings with different size combination, as not seen on the table above.Ex. TASR6 12,7x90x16, TASR6 16Sx90x12, TASR6 12Sx10, TASR6 10Lx8.

(DKO) 90° ELBOW

Print�Page

Print�Chapter

158


Onlinequotation

Onlinequotation





159

METRIC STANDPIPES

ØT

I

EX16 TLR6 6x4 32 7/168 TLR6 8x4 32 7/1610 TLR6 10x6 32 1/212 TLR6 12x6 32 1/212 TLR6 12x8 32 11/1614 TLR6 14x8 32 11/1615 TLR6 15x10 33 13/16

TLR6 16x10 38 13/161618 TLR6 18x10 40 13/1620 TLR6 20x12 40 15/1622 TLR6 22x12 40 15/1625 TLR6 25x12 47 1.1/1625 TLR6 25x16 47 1.1/4

28

-4 -4 -6 -6 -8 -8 -10 -10 -10 -12 -12 -12 -16

-16 TLR6 28x16 47 1.1/4

#

HosePart #T I EX1


ØT

I

C

6 TCR6 6x4 30,5 30,5

8 TCR6 8x4 38,5 3710 TCR6 10x6 ,44 5 4112 TCR6 12x6 48,5 4512 TCR6 12x8 52,5 4514 53,5 5215 53,5 5316 59,5 5418 73,5 6020

TCR6 14x8 TCR6 15x10 TCR6 16x10 TCR6 18x10 TCR6 20x12 78,5 65

22 TCR6 22x12 79,5 6625 TCR6 25x12 88,5 8025 TCR6 25x16 88,5 8028

-4

-4 -6 -6 -8 -8 -10 -10 -10 -12 -12 -12 -16 -16 TCR6 28x16 108,5 100

#Hose

Part #T I C

Important:


To order Stainless Steel, add the letter "I", and to order Brass add the letter "C" in code.Ex TLR6 12-Ix8, TLR6 16-Cx10.

To order Stainless Steel, add the letter "I", and to order Brass add the letter "C" in code.Ex TCR6 12-Ix8, TCR6 16-Cx10.

1 – The assembly working pressure is limited by the hose pressure.2 – On request we can provide the hose fittings with different size combination, as not seen on the table above.Ex. TLR6 12,7x16, TLR6 16x12, TCR6 12x10, TCR6 10x8.

Print�Page

Print�Chapter


Onlinequotation

Onlinequotation



http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=140&category_id=13&keyword=tcr6&option=com_virtuemart&Itemid=1



Important:

M8X1 TMR6 M8x1x4 17,5

TMR6 M10x1,5x4 17,5M10X1 5,

M12X1,5 TMR6 M12x1,5x4 22,5,M16X1 5 TMR6 M16x1,5x6 22,5

7/16

9/16

11/169/16

M18X1,5 TMR6 M18x1,5x6 23,0 11/16

M18X1,5 TMR6 M18x1,5x6 24,5 7/8

M20X1,5 TMR6 M20x1,5x8 11/16

M18X1,5 TMR6 M18X1,5x8 7/8M22X1,5 TMR6 M22x1,5x10

26,5

25,528,0 7/8

M27X2 TMR6 M27X2x10 30,5 1.1/16M24X2 28,0 1M26X2 32,0 1.3/8M33X2 34,0 /1.1 4M33X2 34,0 1.3/8M42X2

-4

-4

-4 -6

-6

-8

-8

-10 -10 -10 -12 -12 -12 -16 -16

TMR6 M24x2x12TMR6 M26x2x12TMR6 M33x2x16TMR6 M33x2x16TMR6 M42x2x16 38,0 2

Hose Part # I EX1#

METRICMALE METRIC PARALLEL

I

EX1

Th

re

ad

METR

IC

To order Stainless Steel, add the letter "I",and to order Brass add the letter "C" in code.Ex TMR6 M12X1,5-Ix6 TMR6 M20X1,5-Cx10.

1/8-28 TMR6 1/8 BSPx4 17,5

1/4-19 TMR6 1/4 BSPx4 22,0

3/8-19 TMR6 3/8 BSPx4 24,5

1/4-19 TMR6 1/4 BSPx6 22,5

3/8-19 TMR6 3/8 BSPx6 24,5

1/2-14 TMR6 1/2 BSPx6 27,0

3/8-19 TMR6 3/8 BSPx8 24,5

7/16

9/16

11/16

9/16

11/16

7/8

11/16

1/2-14 TMR6 1/2 BSPx8 26,0 7/8

1/2-14 TMR6 1/2 BSPx10 28,0 7/83/4-14 TMR6 3/4 BSPx10 30,0 1.1/161/2-14 TMR6 1/2 BSPx12 30,0 11-11 TMR6 1 BSPx12 32,0 1.3/83/4-14 TMR6 3/4 BSPx16 30,0 1.1/41-11

-4

-4

-4

-6

-6

-6

-8

-8

-10 -10 -12 -12 -16 -16 TMR6 1 BSPx16 32,0 1.3/8

Hose Part # I EX1#

BSPMALE PARALLEL BSP

I

EX1

Th

re

ad

BS

P

To order Stainless Steel, add the letter "I", and to order Brass add the letter "C" in code.Ex TMR6 1/4 BSP-Ix6 TMR6 3/4 BSP-Cx10.

1/8-27 TMR6 1/8 NPTx4 18,5 7/16

1/4-18 TMR6 1/4 NPTx4 22,5 9/16

3/8-18 TMR6 3/8 NPTx4 22,5 11/161/4-18 TMR6 1/4 NPTx6 24,0 9/16

3/8-18 TMR6 3/8 NPTx6 24,0 11/16

1/2-14 TMR6 1/2 NPTx6 ,29 5

3/8-18 TMR6 3/8 NPTx8 24,0 11/16

1/2-14 TMR6 1/2 NPTx8 29,0

7/8

7/81/2-14 TMR6 1/2 NPTx10 30,5 7/83/4-14 TMR6 3/4 NPTx10 30,5 1.1/161/2-14 TMR6 1/2 NPTx12 30,5 11-11.1/2 TMR6 1 NPTx12 37,5 1.3/83/4-14 TMR6 3/4 NPTx16 32,5 1.1/41-11.1/2

-4

-4

-4 -6

-6

-6

-8

-8 -10 -10 -12 -12 -16 -16 TMR6 1 NPTx16 37,5 1.3/8

#Hose Part # I EX1NPT

MALE NPT PIPE

I

EX1

Th

re

ad

NP

T

To order Stainless Steel, add the letter "I", and to order Brass add the letter "C" in code.Ex TMR6 1/4 NPT-Ix6 TMR6 3/4 NPT-Cx10.

1 – The assembly working pressure is limited by the hose pressure.2 – On request we can provide the hose fittings with different size combination, as not seen on the table above.We also provide the BSP Taper (BSPT), Metric Taper (MK) and UN/UNF.

Print�Page

Print�Chapter

160


Onlinequotation

Onlinequotation

Onlinequotation



http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=143&category_id=13&keyword=tmr6&option=com_virtuemart&Itemid=1



161


7/16-20 2501R6-4-4 25,7 9/16

1/2-20 2501R6-5-4 27,1 5/8

9/16-18 2501R6-6-6 25,1 11/16

3/4-16 2501R6-8-6 27,8

3/4-16 2501R6-8-8 28,3

2501R6-10-8 30,37/8-14

7/8-14 2501R6-10-10 32,81.1/16-12 2501R6-12-12 36,7

7/8

7/8

1

11.1/4

1-5/16-12

-4

-5

-6

-8

-8

-10

-10 -12 -16

-4

-4

-6

-6

-8

-8

-10 -12 -16 2501R6-16-16 39,3 1.1/2

IFEMALE JIC 37° SWIVEL

I

Th

re

ad

U

NF

EX2EX2

2503R6-4-4 28,9 8,4 9/16

2503R6-5-4 30,1 9,2 5/8

2503R6-6-6 31,8 10,0 11/16

2503R6-8-6 37,1 14,0 7/8

2503R6-8-8 41,1 14,0 7/8

2503R6-10-8 43,5 16,0 1

2503R6-10-10 45,5 16,0 12503R6-12-12 55,2 19,8 1.1/4

7/16-20

1/2-20

9/16-18

3/4-16

3/4-16

7/8-14

7/8-14 1.1/16-12 1-5/16-12

-4

-5

-6

-8

-8

-10

-10 -12 -16

-4

-4

-6

-6

-8

-8

-10 -12 -16 2503R6-16-16 59,2 22,6 1.1/2

IFEMALE JIC 37° SWIVEL 45° ELBOW

EX2

I

Thread UNF

EX2

C

I


C

I

Thread UNF

EX2

EX2

7/16-20 2514R6-4-4 37,0 21,0 9/16

1/2-20 2514R6-5-4 37,7 22,5 5/8

9/16-18 2514R6-6-6 43,4 23,0 11/16

3/4-16 2514R6-8-6 40,5 35,0 7/8

3/4-16 2514R6-8-8 44,5 35,0 7/8

7/8-14 2514R6-10-8 57,4 35,0 1

7/8-14 2514R6-10-10 56,0 31,2 11.1/16-12 2514R6-12-12 56,8 46,2 1.1/41-5/16-12

-4

-5

-6

-8

-8

-10

-10 -12 -16

-4

-4

-6

-6

-8

-8

-10 -12 -16 2514R6-16-16 73,3 54,3 1.1/2

I


EX2

-4 2515R6-4-4 37,0 45,7 9/16

-4 2515R6-5-4 37,7 45,7 5/8

-6 2515R6-6-6 43,4 55,4 11/16

-6 2515R6-8-6 40,5 61,7 7/8

-8 2515R6-8-8 44,5 61,7 7/8

-8 2515R6-10-8 57,4 63,5 1

-10 2515R6-10-10 56,0 65,3 1-12 2515R6-12-12 56,8 94,7 1.1/4

7/16-20

1/2-20

9/16-18

3/4-16

3/4-16

7/8-14

7/8-14 1.1/16-12 1-5/16-12

-4

-5

-6

-8

-8

-10

-10 -12 -16 -16 2515R6-16-16 73,3 110,0 1.1/2

C

Thread UNF

EX2

I

Important:

7/16-20 2201R6-4-4 22,3

1/2-20 2201R6-5-4 22,3

9/16-18 2201R6-6-6 23,5

3/4-16 2201R6-8-6 26,0

3/4-16 2201R6-8-8 26,0

7/8-14 2201R6-10-8 30,0

2201R6-10-10 31,07/8-141.1/16-12 2201R6-12-12 35,51-5/16-12

-4

-5

-6

-8

-8

-10

-10 -12 -16

-4

-4

-6

-6

-8

-8

-10-12-16 2201R6-16-16 37,0

#Hose Part # I

MALE JIC 37°UNF #

I

Th

re

ad

U

NF

JIC 37°

To order Stainless Steel, add the letter "S", and to order Brass add the letter "B" in code.

Ex 2515R6-8-8 S, 2515R6-6-6 B.


Ex 2514R6-8-8 S, 2514R6-6-6 B.



Ex 2501R6-8-8 S, 2501R6-6-6 B.


Ex 2201R6-8-8 S, 2201R6-6-6 B.

1 – The assembly working pressure is limited by the hose pressure.

#Hose Part #UNF #

#Hose

Part #UNF #

#Hose Part #UNF #

#Hose Part #UNF #

Print�Page

Print�Chapter


Onlinequotation

Onlinequotation

Onlinequotation

Onlinequotation

Onlinequotation









100R7 - HYDRAULIC HOSE THERMOPLASTIC

Specifications: EN 855 R7 - SAE 100 R7 - ISO 3949 - SAE J517Construction: Inner Tube – Seamless tube of thermoplastic polyester resistant to

oils / Reinforcement - A network of high-strength polyester.

Coverage - Thermoplastic Oil resistant and weatherproof.

Temperatura: -40 °C / + 100 °C (-40 °F / + 212 °F)

Main applications: Hydraulic petroleum-based oils. Safety factor of 4:1 to high temperature

fluids based on water plus 65 °C.

#mm mm bar psi bar psi

-3-4-5-6-8-10-12-16

3/16” 1/4” 5/16” /3 8”

1/2” 5/8” 3/4” 1”

4,6-5,46,2-7,07,7-8,59,3-10,312,3-13,515,5-16,718,6-19,825,0-26,4

11,413,715,618,422,525,828,636,7

2101921751571401058770

30502800255022802030152012601015

840768700628560420348280

12200112001020091208120608050404060

90100115125180205240300

Male 24° DIN 8434-1 PTR7

Female Metric SwivelWith O’ring (DKO)PASR7 -

Female Metric Swivel WithO’ring (DKO) - 90° ElbowPASR7 -

Metric StandpipesPLR7

Metric Standpipes90° ElbowPCR7 -

Page163 164Page Page 165 Page 166 Page 167


MALE TAPER and MALE PARALLEL

Male Taper NPT, BSPT and Metric Taper - PMR7

Male Parallel BSP, METRIC and UN/UNF - PMR7

Page 168 Page 168

Male JIC 37°2101R7Page 169

MALE JIC 37° and FEMALE JIC 37° SWIVEL

Female JIC 37°Swivel - 2401R7

Female JIC 37°Swivel 90° Elbow2414R7 - Page 169 Page 170

Inch ID OD Pressure WP Pressure BP


Min.BendRadius mm

Print�Page

Print�Chapter

162














163


I

EX1EX2

ØT

Important:


6 1/2 9/168 9/16 11/1610 11/16 3/412 13/16 7/815 7/8 1.1/1618 1.1/16 1.1/422 /1.1 4 1.3/828 1.5/8 1.5/835 1.7/8 242 2.1/4 2.3/86 1/2 11/168 9/16 3/410 11/16 7/812 13/16 15/1614 7/8 1.1/1616 1 1.1/420 1.1/4 1.3/820 1.1/4 1.3/825 1.3/8 1.3/425 1.3/8 /1.3 430 1.3/4 238 2 2.3/838

-4-4-4-6-8-10-12-16-20-32-4-4-4-6-8-8-10-12-12-16-16-20-24


26,527,527,526,530,530,535,539,545,548,526,527,527,526,530,5 30,530,535,535,539,540,547,548,5 2 2.3/8

#


L

S

Const.Serie

Tubes ( T ) Metrics

1 – To order Stainless Steel add the letter “I” in code.Ex PTR7 12L-Ix6, PTR7 20S-Ix12.2 – The assembly working pressure is limited by the hose pressure.3 – On request we can provide the hose fittings with different size combination, as not seen on the able above.Ex. PTR7 16Sx12, PTR7 12Sx10, PTR7 10Lx8, PTR7 18Lx12.

Print�Page

Print�Chapter


Onlinequotation



http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=151&category_id=13&keyword=TERMINAL+PRENSADO+RETO+%5D&option=com_virtuemart&Itemid=1


FEMALE METRIC SWIVEL WITH O’ORING (DKO)

I

EX1EX2

ØT

6 PASR7 6Lx4 35,3 1/2 9/168 PASR7 8Lx4 35,4 1/2 11/1610 35,3 1/2 3/412 38,2 5/8 7/815 39,9 13,16 1.1/1618 46,5 1 1.1/422 47,1 1.1/8 1.3/828 54 1.3/8 1.5/835

PASR7 10Lx4PASR7 12Lx6PASR7 15Lx8PASR7 18Lx10PASR7 22Lx12PASR7 28Lx16PASR7 35Lx20 56,5 1.7/8 2

42 PASR7 42Lx32 61,5 2.1/4 2.3/86 PASR7 6Sx4 35,3 1/2 /11 168 PASR7 8Sx4 35,4 1/2 3/410 PASR7 10Sx4 35,3 1/2 7/812 PASR7 12Sx6 38,2 5/8 15/1614 PASR7 14Sx8 39,9 13/16 1.1/1616 PASR7 16Sx8 44,9 13/16 1.1/420 PASR7 20Sx10 1 1.3/820 PASR7 20Sx12

46,547,1 1.1/8 1.3/8

25 PASR7 25Sx12 52,1 1.1/8 1.3/425 PASR7 25Sx16 56,5 1.3/8 1.3/430 PASR7 30Sx16 56,5 1.3/8 238 PASR7 38Sx20 61,5 1.7/8 2.3/838

-4-4-4-6-8-10-12-16-20-32-4-4-4-6-8-8-10-12-12-16-16-20-24 PASR7 38Sx24 61,5 1.7/8 2.3/8

#


L

S

Const.Serie

Tubes ( T ) Metrics

1 – To order Stainless Steel add the letter “I” in code.Ex PASR7 12L-Ix8,PASR7 9,5-Ix6.2 – The assembly working pressure is limited by the hose pressure.3 – On request we can provide the hose fittings with different size combination, as not seen on the able above.Ex. PASR7 12,7x8, PASR7 16Sx12, PASR7 12Sx10, PASR7 10Lx8.

Print�Page

Print�Chapter

164


Onlinequotation



http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=151&category_id=13&keyword=TERMINAL+PRENSADO+RETO+%5D&option=com_virtuemart&Itemid=1

165


Important:

I

EX2ØT

C


PASR7 6Lx90x4 33,5 30,5 9/16PASR7 8Lx90x4 41,5 37 11/16PASR7 10Lx90x4 47,5 41 /3 4PASR7 12Lx90x6 51 45 7/8PASR7 15Lx90x8 56,5 53 1.1/16PASR7 18Lx90x10 76,5 60 1.1/4PASR7 22Lx90x12 82,5 66 1.3/8PASR7 28Lx90x16 114,5 100 1.5/8PASR7 35Lx90x20 125,5 110 2PASR7 42Lx90x32 135,5 120 2.3/8PASR7 6Sx90x4 33,5 30,5 11/16PASR7 8Sx90x4 41,5 37 3/4PASR7 10Sx90x4 47,5 41 7/8PASR7 12Sx90x6 51 45 15/16PASR7 14Sx90x8 58,5 52 1.1/16PASR7 16Sx90x8 62,5 54 1.1/4PASR7 20Sx90x10 81,5 65 1.3/8PASR7 20Sx90x12 81,5 65 1.3/8PASR7 25Sx90x12 91,5 80 1.3/4PASR7 25Sx90x16 94,5 80 1.3/4PASR7 30Sx90x16 ,124 5 110 2PASR7 38Sx90x20 135,5 120 2.3/8

6810121518222835426810121416202025 25303838

-4-4-4-6-8-10-12-16-20-32-4-4-4-6-8-8-10-12-12-16-16-20-24 PASR7 38Sx90x24 135,5 120 2.3/8

#

Hose Part #T I EX2C

L

S

Const.Serie

Tubes ( T ) Metrics

1 – To order Stainless Steel add the letter “I” in code.Ex PASR7 12L-Ix90x6, PASR7 16S-Ix90x8.2 – The assembly working pressure is limited by the hose pressure.3 – On request we can provide the hose fittings with different size combination, as not seen on the able above.Ex. PASR7 12,7x90x8, PASR7 16Sx90x12, PASR7 12Sx90x10, PASR7 10Lx90x8.

Print�Page

Print�Chapter


Onlinequotation



http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=152&category_id=13&keyword=terminal+prensado+curva&option=com_virtuemart&Itemid=1


METRIC STANDPIPES

I

EX1

ØT

Important:

PLR7 6x4 35,3PLR7 8x4 ,35 4PLR7 10x4 35,3

1/21/21/2

PLR7 12x6 38,2 5/8PLR7 14x8 39,9 13/16PLR7 15x8 39,9 13,16PLR7 16x8 44,9 13/16

8PLR7 1 x10 46,5 1PLR7 20x10 46,5 1PLR7 20x12 47,1 1.1/8PLR7 22x12 47,1 1.1/8PLR7 25x12 52,1 1.1/8PLR7 25x16 56,5 1.3/8PLR7 28x16 54 1.3/8PLR7 30x16 56,5 1.3/8PLR7 35x20 56,5 1.7/8PLR7 38x20 61,5 1.7/8PLR7 38x24 61,5 1.7/8

6810121415161820202225 25283035383842

-4-4-4-6-8-8-8-10-10-12-12-12-16-16-16-20-20-24-32 PLR7 42x32 61,5 2.1/4

#

Hose Part #T I EX1

Tubes ( T ) Metric

1 – To order Stainless Steel add the letter “I” in code.Ex PLR7 12-Ix6, PLR7 9,5-Ix4.2 - To request Nut/Cutting Ring pre-crimped, add "M" at the code beginning.Ex. MPLR7 20Sx12, MPLR7 25,4x16.3 – The assembly working pressure is limited by the hose pressure.4 – On request we can provide the hose fittings with different size combination, as not seen on the able above.Ex.: PLR7 12,7x8, PLR7 16x12, PLR7 12x10, PLR7 10x8.

Print�Page

Print�Chapter

166


Onlinequotation



http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=153&category_id=13&keyword=terminal+prensado+reto&option=com_virtuemart&Itemid=1

167


Important:

I

ØT

C


PCR7 6x4 33,5 30,5

PCR7 8x4 41,5 37

PCR7 10x4 47,5 41

PCR7 12x6 51 45PCR7 14x8 58,5 52PCR7 15x8 56,5 53

62,5 5476,5 6081,5 6581,5 6582,5

PCR7 16x8 PCR7 18x10PCR7 20x10PCR7 20x12PCR7 22x12PCR7 25x12 91,5PCR7 25x16 94,5PCR7 28x16 114,5

668080100

PCR7 30x16 124,5 110PCR7 35x20 125,5 110PCR7 38x20 135,5 120PCR7 38x24 135,5 120

6

8

10

12141516182020222525283035383842

-4

-4

-4

-6 -8 -8 -8 -10-10-12-12-12-16-16-16-20-20-24-32 PCR7 42x32 135,5 120

#

HosePart #T I C

Tubes ( T ) Metric

1 – To order Stainless Steel add the letter “I” in code.Ex PCR7 12-Ix6, PCR7 9,5-Ix4.2 - To request Nut/Cutting Ring pre-crimped, add "M" at the code beginning.Ex MPCR7 20Sx12, MPCR7 25,4x16.3 – The assembly working pressure is limited by the hose pressure.4 – On request we can provide the hose fittings with different size combination, as not seen on the able above.Ex. PCR7 12,7x8, PCR7 16x12, PCR7 12x10, PCR7 10x8.

Print�Page

Print�Chapter


Onlinequotation



http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=154&category_id=13&keyword=TERMINAL+PRENSADO+CURVa&option=com_virtuemart&Itemid=1


Important:

MALE NPT PIPE

A

I

EX1

1/8-27 PMR7 1/8 NPTx4 10 24

1/4-18 PMR7 1/4 NPTx4 14,2 29

1/4-18 PMR7 1/4 NPTx6 14,2 30,5

3/8-18 PMR7 3/8 NPTx6 14,2 30,5

3/8-18 PMR7 3/8 NPTx8 14,2 32

1/2

11/16

5/8

11/16

13/16

1/2-14 PMR7 1/2 NPTx8 19 38,5 7/81/2-14 PMR7 1/2 NPTx10 19 38,5 15/163/4-14 PMR7 3/4 NPTx10 19 38,5 1.1/161/2-14 PMR7 1/2 NPTx12 19 38,5 1.1/83/4-14 PMR7 3/4 NPTx12 19 38,5 1.1/83/4-14 PMR7 3/4 NPTx16 19 45 1.3/81-11.1/2 PMR7 1 NPTx16 24 50 1.3/81.1/4-11.1/2 25 56,5 1.7/81.1/2-11.1/2 25,5 55,5 22-11.1/2

-4

-4

-6

-6

-8

-8 -10 -10 -12 -12 -16 -16 -20 -24 -32

PMR7 1.1/4 NPTx20PMR7 1.1/2 NPTx24PMR7 2 NPTx32 26 59,5 2.1/2

#Hose

Part # I EX1NPT A

MALE BSP THREADPMR7 1/8 BSPx4 8 23,5 9/16

PMR7 1/4 BSPx4 12 29 3/4

PMR7 1/4 BSPx6 12 30 3/4

PMR7 3/8 BSPx6 12 30,5 7/8

PMR7 3/8 BSPx8 12 34 7/8

PMR7 1/2 BSPx8 14 34,5 1.1/16PMR7 1/2 BSPx10 14 36,5 1.1/16PMR7 3/4 BSPx10 16 38,5 /1.1 4

1/2 PMR7 BSPx12 14 33,5 1.1/8PMR7 3/4 BSPx12 16 33,5 1.1/4PMR7 3/4 BSPx16 16 44,5 1.3/8PMR7 1 BSPx16 18 46,5 1.1/2PMR7 1.1/4 BSPx20 20 51,5 2

22 55 2.1/4

1/8-28

1/4-19

1/4-19

3/8-19

3/8-19

1/2-141/2-143/4-141/2-143/4-143/4-141-111.1/4-111.1/2-112-11

-4

-4

-6

-6

-8

-8 -10 -10 -12 -12 -16 -16 -20 -24 -32

PMR7 1.1/2 BSPx24PMR7 2 BSPx32 24 61 2.3/4

Hose Part # I EX1#

BSP A

I

EX1

A

1 – To order Stainless Steel add the letter “I” in code.Ex PMR7 1/4 NPT-Ix6, PMR7 1/4 BSP-Ix6.2 – The assembly working pressure is limited by the hose pressure.3 – On request we can provide the hose fittings with different size combination, as not seen on the table above.We also provide the BSP Taper (BSPT) and Metric Taper (MK).

Print�Page

Print�Chapter

168


Onlinequotation

Onlinequotation



http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=155&category_id=13&keyword=terminal+macho+npt&option=com_virtuemart&Itemid=1


169


2401R7-4-4 27

2401R7-5-4 28,4

2401R7-6-4 28,4

2401R7-4-6 29,9

2401R7-6-6 31,3

2401R7-10-6 36

2401R7-6-8 33

2401R7-8-8 35,7

2401R7-10-8 37,7

2401R7-8-10 37,3

2401R7-10-10 39,3

2401R7-12-10 41,7

2401R7-8-12 37,9

2401R7-12-12 42,3

2401R7-16-12 43,6

2401R7-12-16 46,7

2401R7-16-16 48

2401R7-16-20 45

2401R7-20-20 56,2

2401R7-24-24 59,4

7/16-20

1/2-20

9/16-18

7/16-20

9/16-18

7/8-14

9/16-18

3/4-16

7/8-14

3/4-16

7/8-14

1.1/16-12

3/4-16

1.1/16-12

1-5/16-12

1.1/16-12

1-5/16-12

1-5/16-12

1.5/8-12

1.7/8-12

2.1/2-12

-4

-5

-6

-4

-6

-10

-6

-8

-10

-8

-10

-12

-8

-12

-16

-12

-16

-16

-20

-24

-32

-4

-4

-4

-6

-6

-6

-8

-8

-8

-10

-10

-10

-12

-12

-12

-16

-16

-20

-20

-24

-32 2401R7-32-32 72,4

I


I

Th

re

ad

U

NF

Important:

2101R7-4-4 28,7

2101R7-5-4 28,7

2101R7-6-4 28,9

2101R7-6-6 30,2

2101R7-10-6 35,4

2101R7-6-8 31,9

2101R7-8-10 38,6

2101R7-10-10 42

2101R7-12-10 39

2101R7-12-12 43,1

2101R7-16-12 47,1

2101R7-12-16 45,5

2101R7-16-16 49,5

2101R7-20-20 52,5

2101R7-24-24 52,5

7/16-20

1/2-20

9/16-18

9/16-18

7/8-14

9/16-18

3/4-16

7/8-14

1.1/16-12

1.1/16-12

1.5/16-12

1.1/16-12

1.5/16-12

1.5/8-12

1.7/8-12

2.1/2-12

-4

-5

-6

-6

-10

-6

-8

-10

-12

-12

-16

-12

-16

-20

-24

-32

-4

-4

-4

-6

-6

-8

-10

-10

-10

-12

-12

-16

-16

-20

-24

-32 2101R7-32-32 65,5

#Hose

Part # I

MALE JIC 37°

UNF #

Thread UNF

I

JIC 37°

1 – To order Stainless Steel add the letter “S” in code.Ex. 2101R7-10-8 S, 2401R7-8-8 S.2 – The assembly working pressure is limited by the hose pressure.3 – On request we can provide the hose fittings with different size combination, as not seen on the table above.

#Hose Part #UNF #

Print�Page

Print�Chapter


Onlinequotation

Onlinequotation




http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=107&category_id=13&keyword=terminal+macho&option=com_virtuemart&Itemid=1

Important:


NOTES

IFEMALE JIC 37° SWIVEL 90° ELBOW

2414R7-4-4 ,28 8

2414R7-5-4 30,3

2414R7-6-4 32

2414R7-6-6 32

2414R7-8-6 35,2

2414R7-8-8 41,4

2414R7-10-8 43,4

2414R7-10-10 45,5

2414R7-12-10 55,2

2414R7-12-12 59,3

2414R7-14-12 57,5

2414R7-16-16 61,2

2414R7-20-20 78,5

2414R7-24-24 80

7/16-20

1/2-20

9/16-18

9/16-18

3/4-16

3/4-16

7/8-14

7/8-14

1.1/16-12

1.1/16-12

1.3/16-12

1-5/16-12

1.5/8-12

1.7/8-12

2.1/2-12

-4

-5

-6

-6

-8

-8

-10

-10

-12

-12

-14

-16

-20

-24

-32

-4

-4

-4

-6

-6

-8

-8

-10

-10

-12

-12

-16

-20

-24

-32 2414R7-32-32 121,5

17,2

19,6

21,6

21,6

27,7

27,7

31,2

31,2

46,2

46,2

50,8

54,3

65,5

74

125

I

C

ThreadUNF

C

1 - To order Stainless Steel, add the letter "S" in code.Ex 2414R7-8-8 S, 2414R7-12-12 S.2 – The assembly working pressure is limited by the hose pressure.3 – On request we can provide the hose fittings with different size combination, as not seen on the table above.

#Hose

Part #UNF #

Print�Page

Print�Chapter

170


Onlinequotation



http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=163&category_id=13&keyword=terminal+90&option=com_virtuemart&Itemid=1

171


-3-4-6-8-10-12-16

3/16” 1/4” 3/8” 1/2” 5/8” 3/4” 1”

4,6-5,46,2-7,09,3-10,312,3-13,515,5-16,718,6-19,825,0-26,4

14,616,820,324,629,833,038,6

350350280245192157140

5100510040603550280022802030

140014001120980768628560

204002040016240142001120091208120

90100125180205240300

100R8 - THERMOPLASTIC HYDRAULIC HOSE


Male 24°DIN 8434-1PTR8 -

Female Metric SwivelWith O’ring (DKO)PASR8 -

Female Metric Swivel WithO’ring (DKO) - 90° ElbowPASR8 -

Metric StandpipesPLR8

Metric Standpipes90° ElbowPCR8 -

Page 172 Page 173 Page 174 Page 175 Page 176


MALE TAPER and MALE PARALLEL

Male Taper NPT, BSPT and Metric Taper - PMR8

Male Parallel BSP, METRIC and UN/UNF - PMR8

Page 177 Page 177

Male JIC 37°2101R8Page 178

MALE JIC 37° and FEMALE JIC 37° SWIVEL

Female JIC 37° Swivel2401R8


Page 178 Page179

Specifications: EN 855 R8 - SAE 100 R8 - ISO 3949 - SAE J517

Construction: Inner Tube - Seamless tube of thermoplastic polyester resistant to oils

Reinforcement - 1 aramid web (Kevlar) of high resistance.

Coverage - Thermoplastic oil resistant and weatherproof.

Temperature: -40 ° C / + 100 ° C (-40 ° F / + 212 ° F)

Main applications: Hydraulic circuits petroleum-based oils. Safety factor of 4:1 to high temperature fluids

based on water plus 65 ° C.



Min.BendRadius mm

Print�Page

Print�Chapter















I

EX1EX2

ØT

Important:


6 26,5 9/168 27,5 11/1610 27,5 3/412 26,5 7/815 30,5 1.1/1618 30,5 1.1/422 35,5 1.3/828 39,5 1.5/835 45,5 242 48,5 2.3/86 26,5 11/168 27,5 3/410 27,5 7/812 26,5 15/1614 30,5 1.1/1616 30,5 1.1/420 30,5 1.3/820 35,5 1.3/825 35,5 1.3/425 39,5 1.3/430 40,5 238 47,5 2.3/838

-4-4-4-6-8-10-12-16-20-32-4-4-4-6-8-8-10-12-12-16-16-20-24 48,5 2.3/8

#

Hose


Part #T I EX2

1/29/1611/1613/167/81.1/161.1/41.5/81.7/82.1/41/29/1611/1613/167/811.1/41.1/41.3/81.3/81.3/422

EX1

L

S

Const.Serie

Tubes ( T ) Metric

1 – To order Stainless Steel add the letter “I” in code.Ex PTR8 12L-Ix6, PTR8 20S-Ix12.2 – The assembly working pressure is limited by the hose pressure.3 – On request we can provide the hose fittings with different size combination, as not seen on the able above.Ex. PTR8 16Sx12, PTR8 12Sx10, PTR8 10Lx8, PTR8 18Lx12.

Print�Page

Print�Chapter

172


Onlinequotation



http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=150&category_id=13&keyword=terminal+prensado+tubo&option=com_virtuemart&Itemid=1

173


FEMALE METRIC SWIVEL WITH O’ORING (DKO)

I

EX1EX2

ØT

Important:

6 35,3 1/2 9/168 35,4 1/2 11/1610 35,3 1/2 3/412 38,2 5/8 7/815 39,9 13,16 1.1/1618 46,5 1 1.1/422 47,1 1.1/8 1.3/828 54 1.3/8 1.5/835 56,5 1.7/8 242 61,5 2.1/4 2.3/86 35,3 1/2 11/168 35,4 1/2 3/410 35,3 1/2 7/812 38,2 5/8 15/1614 39,9 13/16 1.1/1616 44,9 13/16 1.1/420 46,5 1 1.3/820 47,1 1.1/8 1.3/825 52,1 1.1/8 1.3/425 56,5 1.3/8 1.3/430 56,5 1.3/8 238 61,5 1.7/8 2.3/838

-4-4-4-6-8-10-12-16-20-32-4-4-4-6-8-8-10-12-12-16-16-20-24

PASR8

PASR8 6Lx4PASR8 8Lx4PASR8 10Lx4PASR8 12Lx6PASR8 15Lx8PASR8 18Lx10PASR8 22Lx12PASR8 28Lx16PASR8 35Lx20PASR8 42Lx32PASR8 6Sx4PASR8 8Sx4PASR8 10Sx4PASR8 12Sx6PASR8 14Sx8PASR8 16Sx8PASR8 20Sx10PASR8 20Sx12

25Sx12PASR8 25Sx16PASR8 30Sx16PASR8 38Sx20PASR8 38Sx24 61,5 1.7/8 2.3/8

#Hose

Part #T I EX2EX1

L

S

Const.Serie

Tubes ( T ) Metric

1 – To order Stainless Steel add the letter “I” in code.Ex PASR8 12L-Ix8, PASR8 9,5-Ix6.2 – The assembly working pressure is limited by the hose pressure.3 – On request we can provide the hose fittings with different size combination, as not seen on the able above.Ex PASR8 12,7x8, PASR8 16Sx12, PASR8 12Sx10, PASR8 10Lx8.

Print�Page

Print�Chapter


Onlinequotation





FEMALE METRIC SWIVEL WITH O’ORING (DKO) 90° ELBOW

Important:

I

EX2ØT

C

PASR8 6Lx90x4 33,5 30,5 9/16PASR8 8Lx90x4 41,5 37 11/16PASR8 10Lx90x4 47,5 41 /3 4PASR8 12Lx90x6 51 45 7/8PASR8 15Lx90x8 56,5 53 1.1/16PASR8 18Lx90x10 76,5 60 1.1/4PASR8 22Lx90x12 82,5 66 1.3/8PASR8 28Lx90x16 114,5 100 1.5/8PASR8 35Lx90x20 125,5 110 2PASR8 42Lx90x32 135,5 120 2.3/8PASR8 6Sx90x4 33,5 30,5 11/16PASR8 8Sx90x4 41,5 37 3/4PASR8 10Sx90x4 47,5 41 7/8PASR8 12Sx90x6 51 45 15/16PASR8 14Sx90x8 58,5 52 1.1/16PASR8 16Sx90x8 62,5 54 1.1/4PASR8 20Sx90x10 81,5 65 1.3/8PASR8 20Sx90x12 81,5 65 1.3/8PASR8 25Sx90x12 91,5 80 1.3/4PASR8 25Sx90x16 94,5 80 1.3/4PASR8 30Sx90x16 ,124 5 110 2PASR8 38Sx90x20 135,5 120 2.3/8

6810121518222835426810121416202025 25303838

-4-4-4-6-8-10-12-16-20-32-4-4-4-6-8-8-10-12-12-16-16-20-24 PASR8 38Sx90x24 135,5 120 2.3/8

#

Hose Part #T I EX2C

L

S

Const.Serie

Tubes ( T ) Metric

1 – To order Stainless Steel add the letter “I” in code.Ex PASR8 12L-Ix90x6, PASR8 16S-Ix90x8.2 – The assembly working pressure is limited by the hose pressure.3 – On request we can provide the hose fittings with different size combination, as not seen on the able above.Ex PASR8 12,7x90x8, PASR8 16Sx90x12, PASR8 12Sx90x10, PASR8 10Lx90x8.

Print�Page

Print�Chapter

174


Onlinequotation




175


METRIC STANDPIPES

I

EX1

ØT

Important:

PLR8 6x4 35,3PLR8 8x4 ,35 4PLR8 10x4 35,3

1/21/21/2

PLR8 12x6 38,2 5/8PLR8 14x8 39,9 13/16PLR8 15x8 39,9 13,16PLR8 16x8 44,9 13/16

8PLR8 1 x10 46,5 1PLR8 20x10 46,5 1PLR8 20x12 47,1 1.1/8PLR8 22x12 47,1 1.1/8PLR8 25x12 52,1 1.1/8PLR8 25x16 56,5 1.3/8PLR8 28x16 54 1.3/8PLR8 30x16 56,5 1.3/8PLR8 35x20 56,5 1.7/8PLR8 38x20 61,5 1.7/8PLR8 38x24 61,5 1.7/8

6810121415161820202225 25283035383842

-4-4-4-6-8-8-8-10-10-12-12-12-16-16-16-20-20-24-32 PLR8 42x32 61,5 2.1/4

#

HosePart #T I EX1

Tubes ( T ) Metrics

1 – To order Stainless Steel add the letter “I” in code.Ex PLR7 12-Ix6, PLR7 9,5-Ix4.2 - To request Nut/Cutting Ring pre-crimped, add "M" at the code beginning.Ex MPLR7 20Sx12, MPLR7 25,4x16.3 – The assembly working pressure is limited by the hose pressure.4 – On request we can provide the hose fittings with different size combination, as not seen on the able above.Ex PLR7 12,7x8, PLR7 16x12, PLR7 12x10, PLR7 10x8.

Print�Page

Print�Chapter


Onlinequotation





Important:

I

ØT

C


PCR8 6x4 33,5 30,5

PCR8 8x4 41,5 37

PCR8 10x4 47,5 41

PCR8 12x6 51 45PCR8 14x8 58,5 52PCR8 15x8 56,5 53PCR8 16x8 62,5 54PCR8 18x10 76,5 60PCR8 20x10 81,5 65PCR8 20x12 81,5 65PCR8 22x12 82,5 66PCR8 25x12 91,5 80PCR8 25x16 94,5 80PCR8 28x16 114,5 100PCR8 30x16 124,5 110PCR8 35x20 125,5 110PCR8 38x20 135,5 120PCR8 38x24 135,5 120

6

8

10

12141516182020222525283035383842

-4

-4

-4

-6 -8 -8 -8 -10-10-12-12-12-16-16-16-20-20-24-32 PCR8 42x32 135,5 120

#

HosePart #T I C

Tubes ( T ) Metric

1 – To order Stainless Steel add the letter “I” in code.Ex PCR8 12-Ix6, PCR8 9,5-Ix4.2 - To request Nut/Cutting Ring pre-crimped, add "M" at the code beginning.Ex MPCR8 20Sx12, MPCR8 25,4x16.3 – The assembly working pressure is limited by the hose pressure.4 – On request we can provide the hose fittings with different size combination, as not seen on the able above.Ex PCR8 12,7x8, PCR8 16x12, PCR8 12x10, PCR8 10x8.

Print�Page

Print�Chapter

176


Onlinequotation




177


Important:

MALE NPT PIPE

A

I

EX1

PMR8 1/8 NPTx4 10 24 1/2

PMR8 1/4 NPTx4 14,2 29 11/16PMR8 1/4 NPTx6 14,2 30,5 5/8

PMR8 3/8 NPTx6 14,2 30,5 11/16

PMR8 3/8 NPTx8 14,2 32 13/16

PMR8 1/2 NPTx8 19 38,5 7/8

PMR8 1/2 NPTx10 19 38,5 15/16PMR8 3/4 NPTx10 19 38,5 1.1/16PMR8 1/2 NPTx12 19 38,5 1.1/8PMR8 3/4 NPTx12 19 38,5 1.1/8PMR8 3/4 NPTx16 19 45 1.3/8PMR8 1 NPTx16 24 50 1.3/8PMR8 1.1/4 NPTx20 25 56,5 1.7/8PMR8 1.1/2 NPTx24 25,5 55,5 2

1/8-27

1/4-18 1/4-18

3/8-18

3/8-18

1/2-14

1/2-14 3/4-14 1/2-14 3/4-14 3/4-14 1-11.1/2 1.1/4-11.1/2 1.1/2-11.1/2 2-11.1/2

-4

-4 -6

-6

-8

-8

-10 -10 -12 -12 -16 -16 -20 -24 -32 PMR8 2 NPTx32 26 59,5 2.1/2

#Hose Part # I EX1NPT A

1/8-28 -4 PMR8 1/8 BSPx4 8 23,5 9/16

1/4-19 -4 PMR8 1/4 BSPx4 12 29 3/4

1/4-19 -6 PMR8 1/4 BSPx6 12 30 3/4

/3 8-19 -6 PMR8 3/8 BSPx6 12 30,5 7/8

3/8-19 -8 PMR8 3/8 BSPx8 12 34 7/8

/1 2-14 -8 PMR8 1/2 BSPx8 14 34,5 1.1/161/2-14 -10 PMR8 1/2 BSPx10 14 36,5 1.1/163/4-14 -10 PMR8 3/4 BSPx10 16 38,5 1.1/41/2-14 -12 PMR8 1/2 BSPx12 14 33,5 1.1/83/4-14 -12 PMR8 3/4 BSPx12 16 33,5 1.1/43/4-14 -16 PMR8 3/4 BSPx16 16 44,5 1.3/81-11 -16 PMR8 1 BSPx16 18 46,5 1.1/21.1/4-11 -20 PMR8 1.1/4 BSPx20 20 51,5 21.1/2-11 -24 PMR8 1.1/2 BSPx24 22 55 2.1/42-11 -32 PMR8 2 BSPx32 24 61 2.3/4

HosePart # I EX1#

BSP A

MALE BSP THREAD

I

EX1

A

1 – To order Stainless Steel add the letter “I” in code.Ex PMR8 1/4 NPT-Ix6, PMR8 1/4 BSP-Ix6.2 – The assembly working pressure is limited by the hose pressure.3 – On request we can provide the hose fittings with different size combination, as not seen on the table above.We also provide the BSP Taper (BSPT) and Metric Taper (MK).

Print�Page

Print�Chapter


Onlinequotation

Onlinequotation






7/16-20 -4 2401R8-4-4 27

1/2-20 -4 2401R8-5-4 28,4

9/16-18 -4 2401R8-6-4 28,4

7/16-20 -6 2401R8-4-6 29,9

9/16-18 -6 2401R8-6-6 31,3

7/8-14 -6 2401R8-10-6 36

9/16-18 -8 2401R8-6-8 33

3/4-16 -8 2401R8-8-8 35,7

7/8-14 -8 2401R8-10-8 37,7

3/4-16 -10 2401R8-8-10 37,3

7/8-14 -10 2401R8-10-10 39,3

1.1/16-12 -10 2401R8-12-10 41,7

3/4-16 -12 2401R8-8-12 37,9

1.1/16-12 -12 2401R8-12-12 42,3

1-5/16-12 -12 2401R8-16-12 43,6

1.1/16-12 -16 2401R8-12-16 46,7

1-5/16-12 -16 2401R8-16-16 48

1-5/16-12 -20 2401R8-16-20 45

1.5/8-12 -20 2401R8-20-20 56,2

1.7/8-12 -24 2401R8-24-24 59,4

2.1/2-12

-4

-5

-6

-4

-6

-10

-6

-8

-10

-8

-10

-12

-8

-12

-16

-12

-16

-16

-20

-24

-32 -32 2401R8-32-32 72,4

#Hose Part # I


I

Th

re

ad

U

NF

UNF #

Important:

7/16-20 -4 2101R8-4-4 28,7

1/2-20 -4 2101R8-5-4 28,7

9/16-18 -4 2101R8-6-4 28,9

9/16-18 -6 2101R8-6-6 30,2

7/8-14 -6 2101R8-10-6 35,4

9/16-18 -8 2101R8-6-8 31,9

3/4-16 -10 2101R8-8-10 38,6

7/8-14 -10 2101R8-10-10 42

1.1/16-12 -10 2101R8-12-10 39

1.1/16-12 -12 2101R8-12-12 43,1

1.5/16-12 -12 2101R8-16-12 47,1

1.1/16-12 -16 2101R8-12-16 45,5

1.5/16-12 -16 2101R8-16-16 49,5

1.5/8-12 -20 2101R8-20-20 52,5

1.7/8-12 -24 2101R8-24-24 52,5

2.1/2-12

-4

-5

-6

-6

-10

-6

-8

-10

-12

-12

-16

-12

-16

-20

-24

-32 -32 2101R8-32-32 65,5

#Hose

Part # IUNF #

MALE JIC 37°

Thread UNF

I

JIC 37°

1 – To order Stainless Steel add the letter “S” in code.Ex. 2101R8-10-8 S, 2401R8-8-8 S.2 – The assembly working pressure is limited by the hose pressure.3 – On request we can provide the hose fittings with different size combination, as not seen on the table above.

Print�Page

Print�Chapter

178


Onlinequotation

Onlinequotation



http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=160&category_id=13&keyword=terminal+femea+jic&option=com_virtuemart&Itemid=1

http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=159&category_id=13&keyword=TERMINAL+MACHO&option=com_virtuemart&Itemid=1

179

#

HosePart # IUNF #

7/16-20 -4 2414R8-4-4 28,8 17,2

1/2-20 -4 2414R8-5-4 30,3 19,6

9/16-18 -4 2414R8-6-4 32 21,6

9/16-18 -6 2414R8-6-6 32 21,6

3/4-16 -6 2414R8-8-6 35,2 27,7

3/4-16 -8 2414R8-8-8 41,4 27,7

7/8-14 -8 2414R8-10-8 43,4 31,2

7/8-14 -10 2414R8-10-10 45,5 31,2

1.1/16-12 -10 2414R8-12-10 55,2 46,2

1.1/16-12 -12 2414R8-12-12 59,3 46,2

1.3/16-12 -12 2414R8-14-12 57,5 50,8

1-5/16-12 -16 2414R8-16-16 61,2 54,3

1.5/8-12 -20 2414R8-20-20 78,5 65,5

1.7/8-12 -24 2414R8-24-24 80 74

2.1/2-12

-4

-5

-6

-6

-8

-8

-10

-10

-12

-12

-14

-16

-20

-24

-32 -32 2414R8-32-32 121,5 125


C

I

ThreadUNF

Important:


Notes

1 - To order Stainless Steel, add the letter "S" in code.

Ex 2414R8-8-8 S, 2414R8-12-12 S.2 – The assembly working pressure is limited by the hose pressure.3 – On request we can provide the hose fittings with different size combination, as not seen on the table above.

Print�Page

Print�Chapter


Onlinequotation



http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=162&category_id=13&keyword=terminal+90+femea&option=com_virtuemart&Itemid=1

SUPER HIGH PRESSURE HYDRAULIC HOSE


-8-12-16-20-24-32

1/2”3/4”1”1.1/4”1.1/2”2”

12,719,125,431,838,150,8

23,530,438,045,953,566,7

280280

210175

280

175

406040604060304025302530

112011201120840700700

162401624016240121801015010150

125150225250500630

100R12

Important:

Specifications: SAE 100 R12 / EN 856 R12 / ISO 3862-1 R12

Construction:


Inner Tube: Synthetic RubberReinforcement: Four coils of steel yarn on spiral yarn.Cover: Synthetic rubber, weatherproof, fuels, ozone and abrasion resistant.

Standard providing Hose fittings in Steel Carbon.The hose fittings can also be supplied in Stainless Steel (See how to request each item).



Min.BendRadius mm

Print�Page

Print�Chapter

180


Onlinequotation




181


SAE CODE 61 / 62 FLANGES (3000 PSI - STANDARD / 6000 - HIGH PRESSURE)

SAE Code 61/62 FlangeStraight - PFR12

SAE Code 61/62 Flange 45° Elbow - PFR12

SAE Code 61/62Flange 90° ElbowPFR12 - Page 190/191 Page190/191 Page190/191


Female JIC 37° Swivel240151



Female JIC 37°Swivel 90° Elbow (Long)241551 -Page 188 Page 189 Page189 Page189


Male TaperNPT, BSPT andMetric TaperPMR12 - Page 187

Male ParallelBSP, METRIC and UN/UNFPMR12 -Page 187

Male JIC 37°210151

Page 188

METRIC STANDPIPES

Metric StandpipesPLR12 - Pag. 185

Metric Standpipes 90° ElbowPCR12 - Pag. 186

Male 24° DIN 8434-1PTR12

Page 182

Female Metric Swivel WithO’ring (DKO) - 90° ElbowPASR12 - Page 184

Female Metric SwivelWith O’ring (DKO) - PASR12

Page 183


Print�Page

Print�Chapter




















I

EX1EX2

ØT


PTR12 12Lx8 29,5 13/16PTR12 15Lx8 30,5 7/8PTR12 18Lx12 34,5 1.1/8PTR12 22Lx12 35,5 1.1/4PTR12 28Lx16 39,5 1.5/8PTR12 35Lx20 45,5 1.7/8PTR12 42Lx24 46 2.1/4PTR22 42Lx32 45,5 2.1/4

PTR12 12Sx8 29,5 13/16

PTR12 14Sx8 30,5 7/8PTR12 16Sx8 30,5 1PTR12 20Sx12 35,5 1.1/4PTR12 25Sx12 35,5 1.3/8PTR12 25Sx16 39,5 1.3/8PTR12 30Sx16 40,5 1.3/4PTR12 38Sx20 47,5 2

1215182228354242

12

14162025 25303838

-8-8-12-12-16-20-24-32

-8-8-8-12-12-16-16-20-24 PTR12 38Sx24 46 2

7/81.1/161.1/41.3/81.5/822.3/82.3/8

15/161.1/16

/1.1 41.3/8

/1.3 41.3/422.3/82.3/8

#


L

S

Const.Serie

Important:

1 – The assembly working pressure is limited by the hose pressure.2 – On request we can provide the hose fittings with different sizes combination as not seen on the table above: Ex PTR12 16Sx12, PTR12 12Sx8, PTR12 42Lx20.

To order Stainless Steel, add the letter "I" in code.

Ex PTR12 12S-Ix8, PTR12 28L-Ix16.

Print�Page

Print�Chapter

182


Onlinequotation



http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=98&category_id=13&keyword=ptr12&option=com_virtuemart&Itemid=7

183



I

EX1EX2

ØT

Important:

12 PASR12 12Lx8 42,3 7/8 7/815 PASR12 15Lx8 42,3 7/8 1.1/1618 PASR12 18Lx12 47,1 1.1/8 1.1/422 PASR12 22Lx12 47,1 1.1/8 1.3/828 PASR12 28Lx16 53,4 /1.3 8 1.5/835 PASR12 35Lx20 55,9 1.3/4 242 PASR12 42Lx24 62,2 2 2.3/842 PASR22 42Lx32 56,5 2.1/2 2.3/8

12 PASR12 12Sx8 42,3 7/8 15/1614 PASR12 14Sx8 42,3 7/8 1.1/1616 47,3 7/8 1.1/420 47,1 1.1/8 1.3/825 52,1 1.1/8 1.3/425 53,4 1.3/8 1.3/430 53,4 1.3/8 238 60,9 1.3/4 2.3/838

-8-8-12-12-16-20-24-32

-8-8-8-12-12-16-16-20-24

PASR12 16Sx8PASR12 20Sx12PASR12 25Sx12PASR12 25Sx16PASR12 30Sx16PASR12 38Sx20PASR12 38Sx24 62,2 2 2.3/8

#


L

S

Const.Serie


Ex PASR12 12L-Ix8, PASR12 20S-Ix12

1 – The assembly working pressure is limited by the hose pressure.2 – On request we can provide the hose fittings with different sizes combination as not seen on the table above:Ex PASR12 16Sx12, PASR12 12Sx8, PTR12 42Lx20.

Print�Page

Print�Chapter


Onlinequotation



http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=99&category_id=13&keyword=ptr12&option=com_virtuemart&Itemid=7


Important:

I

EX2ØT

C


#

HosePart #T I EX2C

L

S

Const.Serie

12 PASR12 12Lx90x8 45 7/815 PASR12 15Lx90x8

53,5,56 5 53 1.1/16

18 PASR12 18Lx90x12 76,5 60 1.1/422 PASR12 22Lx90x12 82,5 66 1.3/828 PASR12 28Lx90x16 114,5 100 1.5/835 PASR12 35Lx90x20 125,5 110 242 PASR12 42Lx90x24 151 135 2.3/842 151,5 135 2.3/812 53,5 45 15/1614 56,5 53 1.1/1616 62,5 54 1.1/420 81,5 65 1.3/825 91,5 80 1.3/425 94,5 80 1.3/430 124,5 110 238

PASR22 42Lx90x32PASR12 12Sx90x8PASR12 14Sx90x8PASR12 16Sx90x8PASR12 20Sx90x12PASR12 25Sx90x12PASR12 25Sx90x16PASR12 30Sx90x16PASR12 38Sx90x20 135,5 120 2.3/8

38

-8-8-12-12-16-20-24-32-8-8-8-12-12-16-16-20-24 PASR12 38Sx90x24 136 120 2.3/8


Ex PASR12 12L-Ix90x8, PASR12 16S-Ix90x8

1 – The assembly working pressure is limited by the hose pressure.2 – On request we can provide the hose fittings with different sizes combination as not seen on the table above:Ex PASR12 12Lx90x12, PASR12 16Sx90x12.

Print�Page

Print�Chapter

184


Onlinequotation



http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=100&category_id=13&keyword=pasr12&option=com_virtuemart&Itemid=7

185


METRIC STANDPIPES

I

EX1

ØT

Important:

12 -8 PLR12 12x8 42 314 -8 PLR12 14x8 42,315 -8 PLR12 15x8 42,316 -8 PLR12 16x8 47,318 -12 PLR12 18x12 47,120 -12 PLR12 20x12 47,122 -12 PLR12 22x12 47,125 -12 PLR12 25x12 52,125 -16 PLR12 25x16 53,4

28 -16 PLR12 28x16 53,430 -16 PLR12 30x16 53,4

35 -20 PLR12 35x20 55,938 -20 PLR12 38x20 60,938 -24 PLR12 38x24 62,242 -24 PLR12 42x24 62,242 -32 PLR12 42x32 56,5

7/87/87/87/81.1/81.1/81.1/81.1/81.3/8

1.3/81.3/8

1.3/41.3/4222.1/2

#

Hose

Part #T I EX1


Ex PLR12 12-Ix8, PLR12 16-Ix8

1 – The assembly working pressure is limited by the hose pressure.2 – On request we can provide the hose fittings with different sizes combination as not seen on the table above:Ex PLR12 12x12, PLR12 16x12, PLR12 22x8.

Print�Page

Print�Chapter


Onlinequotation





Important:

12 PCR12 12x8

14 PCR12 14x815 PCR12 15x816

-8

-8-8-8 PCR12 16x8

18 -12 PCR12 18x1220 -12 PCR12 20x1222 -12 PCR12 22x1225 -12 PCR12 25x1225 -16 PCR12 25x1628 -16 PCR12 28x1630 -16 PCR12 30x1635 -20 PCR12 35x2038 -20 PCR12 38x2038 -24 PCR12 38x2442 -24 PCR12 42x2442 -32 PCR12 42x32

53 5

58,556,562,576 581,582,591,594,5114,5124 5125,5

,135 5136151151,5

45

5253546065668080100110110120120135135

#

HosePart #T I C

I

ØT

C


To order Stainless Steel, add the letter "I" to the code.

Ex PCR12 12-Ix8, PCR12 16-Ix8

1 – The assembly working pressure is limited by the hose pressure.2 – On request we can provide the hose fittings with different sizes combination as not seen on the table above:Ex PCR12 25.4 x12, 16x12 PCR12.

Print�Page

Print�Chapter

186


Onlinequotation




187


Important:

1 – The assembly working pressure is limited by the hose pressure. 2 – On request we can provide the hose fittings with different size combination, as not seen on the table above.We also provide the BSP Taper (BSPT) and Metric Taper (MK).

3/8-18 14,2 32 13/16

1/2-14

-8

-8 19 38,5 7/83/4-14 -12 19 38 1.1/81-11.1/2 -16 24 50 1.3/81.1/4-11.1/2 -20 25 56,5 1.7/81.1/2-11.1/2 -24 25,5 55,5 22-11.1/2 -32

PMR12 3/8 NPTx8

PMR12 1/2 NPTx8PMR12 3/4 NPTx12PMR12 1 NPTx16PMR12 1.1/4 NPTx20

1.1/2 PMR12 NPTx24 PMR12 2 NPTx32 26 59,5 2.1/2

HosePart # I Ex1

MALE NPT PIPE

NPT A

I

EX1

A

To order Stainless Steel, add the letter "I"

to the code. Ex PMR12 3/4 NPT-Ix12.

#

Hose

I EX1BSP

MALE THREAD BSP

I

EX1

A

A

3/8-19 -8 12

1/2-14 -8 14 3/4-14 -12 161-11 -16 181.1/4-11 -20 201.1/2-11 -24 222-11 -32

PMR12 3/8 BSPx8

PMR12 1/2 BSPx8PMR12 3/4 BSPx12PMR12 1 BSPx16PMR12 1.1/4 BSPx20PMR12 1.1/2 BSPx24PMR12 2 BSPx32 24

34

34,5 33,546,551,55561

7/8

1.1/161.1/41.1/222.1/42.3/4


to the code. Ex PMR12 1 BSP-Ix16.

Part ##

HoseI EX1

I

EX1METRIC

MALE THREAD METRIC

A

A

M18x1,5 -8 PMR12 M18x1,5x8 12 32 15/16

M22x1,5 -8 PMR12 M22x1,5x8 14 34,5 1.1/16

M27x2 -12 PMR12 M27x2x12 16 37,5 1.1/4M33x2 -12 PMR12 M33x2x16 18 37,5 1.5/8M42x2 -16 PMR12 M42x2x16 20 48 2

To order Stainless Steel, add the letter "I"to

the code. Ex PMR12 M42x2-Ix16.

Part ##

9/16-18 -8 10 27,5 11/16

7/8-14 -8 12,7 30,5 1

7/8-14 -12 12,7 27,5 1.1/81.1/16-12 -12 15 ,34 5 1.1/41.5/16-12 -16

UNFx8PMR12 9/16

PMR12 7/8 UNFx8

PMR12 7/8 UNFx12PMR12 1.1/16 UNFx16PMR12 1.5/16 UNFx16 15 37 1.1/2

Hose

I EX1

I

EX1UN/UNF

MALE THREAD UN/UNF

A

A


to the code. Ex PMR12 1.5/16 UNF-Ix16.

Part ##

Print�Page

Print�Chapter


Onlinequotation

Onlinequotation

Onlinequotation

Onlinequotation



http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=105&category_id=13&keyword=pmr12&option=com_virtuemart&Itemid=7





Important:

1 – The assembly working pressure is limited by the hose pressure. 2 – On request we can provide the hose fittings with different size combination, as not seen on the table above.

9/16-18 -6 -8

3/4-16 -8 -87/8-14 -10 -8

1.1/16-12 -12 -8

1.1/16-12 -12 -121.5/16-12 -16 -121.1/16-12 -12 -161.5/16-12 -16 -161.5/8-12 -20 -161.5/16-12 -16 -201.5/8-12 -20 -201.7/8-12 -24 -201.7/8-12 -24 -242.1/2-12 -32 -32

210151-6-8

210151-8-8210151-10-8

210151-12-8

210151-12-12210151-16-12210151-12-16210151-16-16210151-20-16210151-16-20210151-20-20210151-24-20210151-24-24210151-32-32

32

34,537,5

39

434742,5

,43 54546475051,565,5

HosePart #

IMALE JIC 37°UNF #

Thread UNF

I

JIC37°

To order Stainless Steel, add the letter "S"

to the code. Ex 210151-12-12 S.

#

IFEMALE JIC 37° SWIVEL

I

Th

re

ad

U

NF

9/16-18 -6 -8 240151-6-8 35,4

3/4-16 -8 -8 240151-8-8 38,1

7/8-14 -10 -8 240151-10-8 40,1

1.1/16-12 -12 -8 240151-12-8 42,51.1/16-12 -12 -12 240151-12-12 40,81.5/16-12 -16 -12 240151-16-12 42,11.1/16-12 -12 -16 240151-12-16 42,91.5/16-12 -16 -16 240151-16-16 44 21.5/8-12 -20 -16 240151-20-16

,53,3

1.5/16-12 -16 -20 240151-16-20 48,91.5/8-12 -20 -20 240151-20-20 581.7/8-12 -24 -20 240151-24-20 59,41.7/8-12 -24 -24 240151-24-24 59,42.1/2-12 -32 -32 240151-32-32 72,4


to the code. Ex 240151-12-12 S.

HosePart #UNF #

#

Print�Page

Print�Chapter

188


Onlinequotation

Onlinequotation





189


Important:

1 – The assembly working pressure is limited by the hose pressure. 2 – On request we can provide the hose fittings with different size combination, as not seen on the table above.


I

C

ThreadUNF

9/16-18 -6 -8 10

3/4-16 -8 -8 14

7/8-14 -10 -8 16

1.1/16-12 -12 -8 201.1/16-12 -12 -12 201.5/16-12 -16 -12 22,51.1/16-12 -12 -16 201.5/16-12 -16 -16 22,51.5/8-12 -20 -16 281.5/16-12 -16 -20 22,51.5/8-12 -20 -20 281.7/8-12 -24 -20 30,51.7/8-12 -24 -24 30,52.1/2-12 -32 -32

240351-6-8

240351-8-8

240351-10-8

240351-12-8240351-12-12240351-16-12240351-12-16240351-16-16240351-20-16240351-16-20240351-20-20240351-24-20240351-24-24240351-32-32 53

41

46

46,5

5858

,62 557617063,5727879,5125

I C


to the code. Ex 240351-8-8 S.

HosePart #UNF #

#


C

ThreadUNF

I I

9/16-18 -6 -8 241451-6-8 21,5

3/4-16 -8 -8 241451-8-8 27,57/8-14 -10 -8 241451-10-8 31

1.1/16-12 -12 -8 241451-12-8 461.1/16-12 -12 -12 241451-12-12 461.5/16-12 -16 -12 241451-16-12 54,51.1/16-12 -12 -16 241451-12-16 461.5/16-12 -16 -16 241451-16-16 54,51.5/8-12 -20 -16 241451-20-16 65,51.5/16-12 -16 -20 241451-16-20 54,51.5/8-12 -20 -20 241451-20-20 65,51.7/8-12 -24 -20 241451-24-20 741.7/8-12 -24 -24 241451-24-24 742.1/2-12 -32 -32 241451-32-32

33

41,543,5

5555,558,5545771,559,573,578,580121,5 125

C


to the code. Ex 241451-8-8 S.

Hose Part #UNF ##


C

I

ThreadUNF

I

9/16-18 -6 -8 241551-6-8 33 55,5

3/4-16 -8 8 241551-8-8 ,41 5 61,57/8-14 -10 -8 241551-10-8 43,5 65,5

1.1/16-12 -12 -8 241551-12-8 55 65,5

1.1/16-12 -12 -12 241551-12-12 55,5 94,51.5/16-12 -16 -12 241551-16-12 ,58 5 94,51.1/16-12 -12 -16 241551-12-16 54 1101.5/16-12 -16 -16 241551-16-16 57 94,51.5/8-12 -20 -16 241551-20-16 71,5 1101.5/16-12 -16 -20 241551-16-20 ,59 5 1341.5/8-12 -20 -20 241551-20-20 73,5 110

C


to the code. Ex 241551-12-12 S.

HosePart #UNF #

#

Print�Page

Print�Chapter


Onlinequotation

Onlinequotation

Onlinequotation






Onlinequotation


Important:

1 – On request we can provide the hose fittings with different size combination, as not seen on the table above.

SAE CODE 61 FLANGE (3000 PSI – STANDARD)

3/4 -12 52

1 -12 53

1 -16 56

1.1/4 -16 56

1.1/4 -20 58

1.1/2 -20 ,65 5

1.1/2 -24 66

2 -32

PFR12 3/4x12

PFR12 1x12

PFR12 1x16

/PFR12 1.1 4x20

PFR12 1.1/4x20

PFR12 1.1/2x20

PFR12 1.1/2x24

PFR12 2x32 66,5

38

44,6

44,6

51

51

60,5

60,5

71,6

SAE CODE 61 FLANGE STRAIGHT

I

ØD

HosePart #

I#

Flange

ØD

To order Stainless Steel, add the letter "I" to the

code. Ex PFR12 1.1/4-Ix16.

Size

SAE CODE 61 FLANGE 90° ELBOW

3/4 -12 PFRR12 3/4x90x12

1 -16 PFRR12 1x90x16

1.1/4 -20 PFRR12 1.1/4x90x20

1.1/2 -24 PFRR12 1.1/2x90x24

2 -32 PFRR12 2x90x32

57,5

68,5

76,5

87

122

52

60

67

79

114

38

44,6

51

,60 5

71,6I

ØD

C

I C ØD

To order Stainless Steel, add the letter "I" to

the code. Ex PFRR12 1.1/2-Ix90x24.

HosePart #

#

FlangeSize


3/4 -12 PFR12 3/4x45x12 67

1 -16 PFR12 1x45x16 74

1.1/4 -20 PFR12 1.1/4x45x20 80

1.1/2 -24 PFR12 1.1/2x45x24 95

2 -32 PFR12 2x45x32 128

25,5

27

29,5

36

49,5

38

44,6

51

60,5

71,6I

ØD

C

I C ØD

To order Stainless Steel, add the letter "I" to the

code. Ex PFR12 3/4-Ix45x12.

HosePart ##

FlangeSize

Print�Page

Print�Chapter

190


Onlinequotation

Onlinequotation



http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=115&category_id=13&keyword=pfr12&option=com_virtuemart&Itemid=7



191


Important:

1 – On request we can provide the hose fittings with different size combination, as not seen on the table above.

SAE CODE 62 FLANGE (6000 PSI – HIGH PRESSURE)

3/4 -12 PFRR12 3/4x12 61,5 41,4

1 -16 PFRR12 1x16 73,5 47,7

1.1/4 -20 PFRR12 1.1/4x20 78,5 54,2

1.1/2 -24 PFRR12 1.1/2x24 84 63,7

2 -32 PFRR12 2x32 89,5 79,2

SAE CODE 62 FLANGE STRAIGHT

I

ØD

I ØD

To order Stainless Steel, add the letter "I" in

code. Ex PFRR12 1.1/4-Ix20.

HosePart ##

FlangeSize


3/4 -12 PFRR12 3/4x45x12 28 41,4

1 -16 PFRR12 1x45x16 32 47,7

1.1/4 -20 PFRR12 1.1/4x45x20 34 54,2

1.1/2 -24 PFRR12 1.1/2x45x24 43 63,7

2 -32 PFRR12 2x45x32

69,5

78,5

85

102

138,5 60 79,2I

ØD

C

I C ØD


code. Ex PFRR12 3/4-Ix45x12.

HosePart ##

FlangeSize


3/4 -12 PFR12 3/4x90x12 56 41,4

1 -16 PFR12 1x90x16 67 47,7

1.1/4 -20 PFR12 1.1/4x90x20 74 54,2

1.1/2 -24 PFR12 1.1/2x90x24 89 63,7

2 -32 PFR12 2x90x32

57,5

,78 5

76,5

87

122,5 129 79,2I

ØD

C

I C ØD


code. Ex PFRR12 1.1/2-Ix90x24.

HosePart ##

FlangeSize

Print�Page

Print�Chapter


Onlinequotation

Onlinequotation

Onlinequotation




http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=117&category_id=13&keyword=pfrr12&option=com_virtuemart&Itemid=7


PTFE HOSE (MTF)

Important:

MTF

-4 3/16” 4,8 7,6 200 2900 800 11600 55-5 1/4” 6,4 8,8 167 2400 670 9600 75-6 5/16” 7,9 11 142 2000 570 8000 100-8 13/32” 10,3 13 125 1800 500 7200 120-10 1/2” 12,7 15,7 113 1600 450 6400 140-12 5/8” 15,9 19,3 103 1500 410 6000 165-16 7/8” 22,2 26,1 68 970 270 3900 240



Specifications: Exceeds SAE J517 / SAE 100R14A

Construction: Inner tube: Smooth PTFE seamless Reinforcement: A braided stainless steel yarn.

Pressed hoses fittings have standard providing in carbon steel. The Hoses Fittings can also be

supplied in Stainless Steel (See how to request each item). Upon request we provide reusable Hoses

Fittings.



Min.BendRadius mm

Print�Page

Print�Chapter

192




193



Female JIC 37° Swivel2401TF

Page 200

Female JIC 37° Swivel 90° Elbow2414TF

Page 200

Male JIC 37°2101TF

Page 199

Male Taper NPTPMTF

Page 199

MALE TAPER and MALE JIC 37°

METRIC STANDPIPES

Metric StandpipesPLTF

Page 197

Metric Standpipes 90° ElbowPCTF

Page 198

Male 24°DIN 8434-1PTTF

Page. 194

Female Metric Swivel WithO’ring (DKO) - 90° ElbowPASTF - Page 196

Female Metric SwivelWith O’ring (DKO) - PASTF

Page 195

MALE METRIC STUD AND FEMALE METRIC SWIVEL

Print�Page

Print�Chapter














I

EX1EX2

ØT


6 -4 PTTF 6Lx4 26,5

8 -4 PTTF 8Lx4 27,5

10 -4 PTTF 10Lx4 27,5

8 -5 PTTF 8Lx5 27,5

12 -6 PTTF 12Lx6 26,515 -8 PTTF 15Lx8 30,518 -10 PTTF 18Lx10 30,522 -12 PTTF 22Lx12 35,528 -16 PTTF 28Lx16 39,5


L

6 -4 PTTF 6Sx4 26,58 -4 PTTF 8Sx4 27,510 -4 PTTF 10Sx4 27,5

8 -5 PTTF 8Sx5 27,512 -6 PTTF 12Sx6 26,514 -8 PTTF 14Sx8 30,5 16 -8 PTTF 16Sx8 30,520 -10 PTTF 20Sx10 30,520 -12 PTTF 20Sx12 35,525 -12 PTTF 25Sx12 35,525 -16 PTTF 25Sx16 39,530 -16 PTTF 30Sx16 40,5

1/2

/9 16

11/16

9/16

13/167/81.1/16

/1.1 41.5/8/1 2

9/1611/16

9/1613/167/811.1/41.1/41.3/8

/1.3 81.3/4

9/16

11/16

3/4

11/16

7/81.1/161.1/41.3/81.5/811/163/47/8

3/415/161.1/161.1/41.3/81.3/81.3/41.3/42

S

#

Constr.

Serie

To order Stainless Steel, add the letter "I" to the code.

Ex-PTTF 12L-Ix8, PTTF 9.5-Ix6.

1 – The assembly working pressure is limited by the hose pressure.2 – On request we can provide the hose fittings with different sizes combination as not seen on the table above:Ex PTTF 12.7 x8, PTTF 16Sx12, PTTF 12Sx10, PTTF 10Lx8.

Important:

Print�Page

Print�Chapter

194


Onlinequotation




195

6 -4 PASTF 6Lx4 35,3

35,3

38,2

35,4

35,4

39,946,547,154

8 -4 PASTF 8Lx4

10 -4 PASTF 10Lx4

8 -5 PASTF 8Lx5

12 -6 PASTF 12Lx615 -8 PASTF 15Lx818 -10 PASTF 18Lx1022 -12 PASTF 22Lx1228 -16 PASTF 28Lx16


L

6 -4 PASTF 6Sx48 -4 PASTF 8Sx410 -4 PASTF 10Sx4

8 -5 PASTF 8Sx512 -6 PASTF 12Sx614 -8 PASTF 14Sx816 -8 PASTF 16Sx820 -10 PASTF 20Sx1020 -12 PASTF 20Sx1225 -12 PASTF 25Sx1225 -16 PASTF 25Sx1630 -16 PASTF 30Sx16

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1/2

1

1

1.1/8

1.1/8

1.3/8

1.1/8

1.1/8

1.3/8

5/8

5/8

13/16

13/1613/16

9/16

11/16

3/4

11/16

7/81.1/161.1/41.3/81.5/811/163/47/8

3/415/161.1/161.1/41.3/81.3/81.3/41.3/42

S

#

Constr.

Serie



I

EX1EX2

ØT

35,3

35,3

38,2

35,4

35,4

39,944,9

46,547,152,156,556,5

1 – The assembly working pressure is limited by the hose pressure.2 – On request we can provide the hose fittings with different sizes combination as not seen on the table above:Ex PASTF 12.7 x8, PASTF 16Sx12, PASTF 12Sx10, PASTF 10Lx8.


Ex. PASTF Ix8 12L-, 9.5-PASTF Ix6.

Important:

Print�Page

Print�Chapter


Onlinequotation



http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=89&category_id=13&keyword=pastf&option=com_virtuemart&Itemid=7


6 -4 PASTF 6Lx90x4 33,5 30,5 9/16

8 -4 PASTF 8Lx90x4 41,5 37 11/16

10 -4 PASTF 10Lx90x4 47,5 41 3/4

8 -5 PASTF 8Lx90x5 41,5 37 11/16

12 -6 PASTF 12Lx90x6 51 45 7/8

15 -8 PASTF 15Lx90x8 56,5 53 1.1/1618 -10 PASTF 18Lx90x10 76,5 60 1.1/422 -12 PASTF 22Lx90x12 82,5 66 1.3/828 -16 PASTF 28Lx90x16 114,5 100 1.5/8

6 -4 PASTF 6Sx90x4 33,5 30,5 11/168 -4 PASTF 8Sx90x4 41,5 37 3/410 -4 PASTF 10Sx90x4 47,5 41 7/8

8 -5 PASTF 8Lx90x5 41,5 37 3/412 -6 PASTF 12Sx90x6 51 45 15/1614 -8 PASTF 14Sx90x8 58,5 52 1.1/1616 -8 PASTF 16Sx90x8 62,5 54 1.1/420 -10 PASTF 20Sx90x10 81,5 65 1.3/820 -12 PASTF 20Sx90x12 81,5 65 1.3/825 -12 PASTF 25Sx90x12 91,5 80 1.3/425 -16 PASTF 25Sx90x16 94,5 80 1.3/430 -16 PASTF 30Sx90x16 124,5 110 2

#

HosePart #

T I EX2C

L

S

Constr.

Serie

I

EX2ØT

C



Ex PASTF 12L-Ix90x8, PASTF 9.5-Ix90x6.

1 – The assembly working pressure is limited by the hose pressure.2 – On request we can provide the hose fittings with different sizes combination as not seen on the table above:Ex PASTF 12.7x90x8, PASTF 16Sx90x12, PASTF 12Sx90x8, PASTF 10Lx90x6.

Important:

Print�Page

Print�Chapter

196


Onlinequotation



http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=90&category_id=13&keyword=pastf&option=com_virtuemart&Itemid=7

197


METRIC STANDPIPES

I

EX1

ØT

6 -4 PLTF 6Lx4 35,3

8 -4 PLTF 8Lx4 35,4

8 -5 PLTF 8Lx5 35,410 -4 PLTF 10Lx4 35,3

12 -6 PLTF 12Lx6 38 2

14 -8 PLTF 14Sx8 39,9 15 -8 PLTF 15Lx8 39,916 -8 PLTF 16Sx8 44,918 -10 PLTF 18Lx10 46 5

20 -10 PLTF 20Sx10 46,520 -12 PLTF 20Sx12 47,122 -12 PLTF 22Lx12 47,125 -12 PLTF 25Sx12 52,125 -16 PLTF 25Sx16 56,528 -16 PLTF 28Lx16 5430 -16 PLTF 30Sx16 56,5

1/2

1/2

1/21/2

5/8

13/1613/1613/161

11.1/8

/1.1 81.1/81.3/81.3/81.3/8

#

Hose

Part #T I EX1


Ex PLTF 12-Ix6, PLTF 9.5-ix4.

1 – The assembly working pressure is limited by the hose pressure.2 – On request we can provide the hose fittings with different sizes combination as not seen on the table above:Ex PLTF 12x8, PLTF 16x12, PLTF 12x10, PLTF 10x8.

Important:

Print�Page

Print�Chapter


Onlinequotation





6 -4 33,5

8 -4 41,5

8 -5 41,5

10 -4 47,5

12 -6 5114 -8 58,515 -8 56,516 -8 62,518 -10 76 5

20 -10 ,81 520 -12 81,522 -12 ,82 525 -12 91,525 16 94 528 -16 114,530 -16 124,5

PCTF 6x4

PCTF 8x4

PCTF 8x5

PCTF 10x4

PCTF 12x6PCTF 14x8PCTF 15x8PCTF 16x8PCTF 18x10

PCTF 20x10PCTF 20x12PCTF 22x12PCTF 25x12PCTF 25x16PCTF 28x16PCTF 30x16

30,5

37

37

41

4552535460

6565668080100110

#Hose

Part #T I C

I

ØT

C


To order Stainless Steel, add the letter "I" to the code.Ex. PCTF 12 Ix8, PCTF 9.5-Ix6.

1 – The assembly working pressure is limited by the hose pressure.2 – On request we can provide the hose fittings with different sizes combination as not seen on the table above:Ex PASTF 12x90x8, PASTF 16Sx90x12, PASTF 12Sx90x10, PASTF 10Lx90x8.

Important:

Print�Page

Print�Chapter

198


Onlinequotation




199


1/8-27 -4 PMTF 1/8 NPTx4 1/2

1/4-18 -4 PMTF 1/4 NPTx4 11/161/4-18 -5 PMTF 1/4 NPTx5 5/81/4-18 -6 PMTF 1/4 NPTx6 5/8

3/8-18 -6 PMTF 3/8 NPTx6 11/16

3/8-18 -8 PMTF 3/8 NPTx8 13/16

1/2-14 -8 PMTF 1/2 NPTx8 7/81/2-14 -10 PMTF 1/2 NPTx10 15/163/4-14 -10 PMTF 3/4 NPTx10 1.1/161/2-14 -12 1/2 PMTF NPTx12 1.1/83/4-14 -12 PMTF 3/4 NPTx12 1.1/83/4-14 -16 3/4 PMTF NPTx16 1.3/81-11.1/2 -16 PMTF 1 NPTx16

10

14,214,214,2

14,2

14,2

19191919191924

24

2930,530,5

30,5

32

38,5,38 538,538,538,54550 1.3/8

#

HosePart #

I EX1MALE NPT PIPE NPTA

I

EX1

A

To order Stainless Steel, add the letter "I" to the code. Ex PMTF 1/4 NPT-Ix6.

1 – The assembly working pressure is limited by the hose pressure.2 – On request we can provide the hose fittings with different size combination, as not seen on the table above.We also provide the BSP Taper (BSPT) and Metric Taper (MK).Ex. BSP, BSPT, metric and MK (Taper), UN / UNF.

7/16-20 -4 -4 2101TF-4-4

1/2-20 -5 -4 2101TF-5-49/16-18 -6 -4 2101TF-6-49/16-18 -6 -5 2101TF-6-59/16-18 -6 -6 2101TF-6-6

7/8-14 -10 -6 2101TF-10-6

9/16-18 -6 -8 2101TF-6-8

3/4-16 -8 -10 2101TF-8-107/8-14 -10 -10 2101TF-10-101.1/16-12 -12 -10 2101TF-12-101.1/16-12 -12 -12 2101TF-12-121.5/16-12 -16 -12 2101TF-16-121.1/16-12 -12 -16 2101TF-12-161.5/16-12 -16 -16 2101TF-16-16

28,7

28,728,930,230,2

35,4

31,9

38,6423943,147,145,549,5

MALE JIC 37°#

HosePart #

IUNF #

ThreadUNF

I

JIC 37°

To order Stainless Steel, add the letter "S" to the code. Ex 2101TF-8-8 S.


Important:

Important:

Print�Page

Print�Chapter


Onlinequotation

Onlinequotation



http://www.milano.ind.br/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=94&category_id=13&keyword=2101tf&option=com_virtuemart&Itemid=7



7/16-20 -4 -4 2401TF-4-4

1/2-20 -5 -4 2401TF-5-4

9/16-18 -6 -4 2401TF-6-49/16-18 -6 -5 2401TF-6-5

7/16-20 -4 -6 2401TF-4-6

9/16-18 -6 -6 2401TF-6-6

7/8-14 -10 -6 2401TF-10-6

9/16-18 -6 -8 2401TF-6-8

3/4-16 -8 -8 2401TF-8-8

7/8-14 -10 -8 2401TF-10-8

3/4-16 -8 -10 2401TF-8-10

7/8-14 -10 -10 2401TF-10-101.1/16-12 -12 -10 2401TF-12-10

3/4-16 -8 -12 2401TF-8-12/1.1 16-12 -12 -12 2401TF-12-12

1-5/16-12 -16 -12 2401TF-16-121.1/16-12 -12 -16 2401TF-12-161-5/16-12 -16 -16 2401TF-16-16

27

28,4

28,428,4

29,9

31,3

36

33

35,7

37,7

37,3

39,341,7

37,942,343,646,748


I

Th

re

ad

U

NF

Trace

Hoses code I

Thread

UNF Trace

To order Stainless Steel, add the letter "S" to the code. Ex 2401TF-8-8 .

C

CHoses code IFEMALE JIC 37° SWIVEL 90° ELBOWTraceThread

UNF Trace

7/16-20 -4 -4 2414TF-4-4 28,8 17,2

1/2-20 -5 -4 2414TF-5-4 ,30 3 19,6

9/16-18 -6 -4 2414TF-6-4 32 21,69/16-18 -6 -5 2414TF-6-5 32 21,69/16-18 -6 -6 2414TF-6-6 32 21,6

3/4-16 -8 -6 2414TF-8-6 ,35 2 27,7

3/4-16 -8 -8 2414TF-8-8 41,4 27,7

7/8-14 -10 -8 2414TF-10-8 43,4 31,2

7/8-14 -10 -10 2414TF-10-10 45,5 31,2

1.1/16-12 -12 -10 2414TF-12-10 ,55 2 46,21.1/16-12 -12 -12 2414TF-12-12 59,3 46,21.3/16-12 -14 -12 2414TF-14-12 57,5 50,81-5/16-12 -16 -16 2414TF-16-16 61,2 54,3

I

ThreadUNF

To order Stainless Steel, add the letter "S"to the code. Ex 2414TF-8-8 S.


Important:

Print�Page

Print�Chapter

200


Onlinequotation

Onlinequotation





201


#Weight

mm mm bar psi bar psi Kg/m

-4 1/4” 8,0 12,2 100 1450 400 6800 25,0 0,30-6 3/8” 11,0 16,0 90 1305 360 5220 40,0 0,40-8 1/2” 12,0 19,5 80 1160 320 4640 50,0 0,50-12 3/4” 20,0 28,0 64 928 256 3712 70,0 0,62-16 1” 25,0 34,0 50 725 200 2900 90,0 0,80-20 1.1/4” 32,0 43,0 40 580 160 2320 110,0 1,20-24 1.1/2” 40,0 51,0 30 435 120 1740 130,0 1,30-32 2” 50,0 65,0 28 406 112 1624 175,0 1,80-40 2.1/2” 65,0 81,0 24 348 96 1392 200,0 2,40-48 3” 80,0 96,0 18 261 72 1044 205,0 3,40-64 4” 100,0 118,0 16 232 64 928 230,0 3,60-80 5” 125,0 150,0 12 174 48 696 280,0 7,40-96 6” 150,0 175,0 10 145 40 580 320,0 8,40-128 8” 198,0 225,0 8 116 32 464 435,0 12,0

STAINLESS STEEL METAL FLEXIBLE HOSE (TFI).(Stainless Steel Flexible Hose, Wavy external mesh with Stainless Steel Yarn).

Specifications: Wavy external mesh with stainless steel yarn.

Construction: Steel ribbed hose AISI 321/304, Reinforcement/ Coverage - One or more twisted steel yarn AISI 304.

Temperature: - 196 ° C to + 600 ° C (-320° F to + 1112° F)

Main applications: Conduction of liquids, vapors, corrosive gases, fuels and lubricants, liquid oxygen, nitrogen, argon, LPG, Ammonia, food products, pharmaceuticals, etc.

The MILANO sells flexible stainless steel tubes mounted with welded hose fittings at the ends.

Main types of welded hose fittings: DKO - Standard DIN 8434-1 · JIC 37 - Standard DIN 8434-2 · FLANGES: Standards ASME / ANSI (Class # 150, # 300, # 600, # 900, # 1500 and # 2500) ISO / SAE / DIN

Flange types: Threaded flanges Plain flanges blinded Flanges with neck Smooth paste with loose flanges Loose flanges with collar neck Loose flanges for pipes

Important:

More information find on our site: www.milano.ind.br

Consult Sales our Technical Department

E-mail: [email protected]

Phone +55 19 2102-2500.



Min.BendRadius mm

Print�Page

Print�Chapter




Documents

HOSES AND HOSES FITTINGS - Milano · HOSES AND HOSES FITTINGS 100R1AT - MEDIUM PRESSURE HYDRAULIC HOSE - Page 135 Standards: EN 853 1SN - SAE 100 R1AT - ISO 1436-1 1SN/R1AT Construction: