Hospitality and Audiovisual Products

Catalogue 2016

2

Teleste Hospitality Products

Teleste Luminato headend

The Luminato headend platform provides a cost-effective and efficient solution for live content processing for OTT and/or IPTV delivery. Luminato is a modular platform with hot-swappable modules which can be replaced without any interruptions to the hotel guests’ service. Proven to be the most reliable headend platform on the market, it has a failure rate as low as 0,3.

The Luminato gathers TV and video signals from satellite, cable, local and IP sources and delivers a custom TV service. A fully equipped Luminato manages hundreds of free and scrambled TV channels with an electronic program guide (EPG), consumes less than 100 watts of power and creates practically no heat.

Key benefits:

• Economic efficiency • Reliability • Operational efficiency • Versatility• Over 5000 chassis service

Ethernet over Coax products

Ethernet over Coax (EoC) technology offers an attractive option for building profes-sional, standard-based and next generation IP networks. It enables operators to bring gigabit broadband connections to consumers by utilising the existing coaxial cabling that also carries the free-to-air and CATV signals around the building. Teleste’s Ether-net over Coax product portfolio includes a building-level distributed CMTS architecture called DOCSIS Access HUB (DAH) and MoCA®-based indoor solution for distributing Ethernet around the entire house.

DOCSIS Access Hub (DAH)

The DAH will extend your IP network over the existing coaxial cabling used in the infrastructure of the establishment. It enables high-speed broadband con-nections to your customers with consid-erably low costs and without installing new cabling.

3

Key benefits:

• Trouble-free performance with comprehensive, web-based user interface• Uses standard DOCSIS 3.0 connectivity• 16 downstream and 4 upstream channels• Works with all DOCSIS enabled Wi-Fi access points and TV’s• Capacity of 960 Mbps downstream and 160 Mbps upstream• Remote configuration and management• Advanced management tools allow multiple units to link together for large systems• Casing and fanless operation for use in any environment• Available interfaces: Optical interface SFP slot, Ethernet 2xGbE copper

MoCA®-based products

Based on the MoCA®2 standard, our Ethernet over Coax (EOC) adapters enable the extension of Gigabit Ethernet throughout the home. They also enable in-home Wi-Fi extension using the latest 802.11ac (2.4 + 5 GHz) Wi-Fi.

Key benefits:

• Uses the existing coax (DVB-T or CATV) on the premises• Reliability of a wired connection without installing new cabling• The best-performing Wi-Fi extender• Ethernet connection for Smart TV, PVR, NAS etc.• Does not affect existing TV Signals

Total Wi-Fi coverage for the home and garden

To ensure the most reliable coverage, the EOC adapters can be used to add Wi-Fi hot-spots wherever needed. The EOC04 Wi-Fi adapter utilises the existing coaxial cable, and provides the most reliable Wi-Fi extension. This product also has 4x Gigabit Ether-net ports for connection of Smart TV’s, games consoles and PVR’s.

By connecting two EOC devices together, a point-to-point link of up to 800Mbps can be created using a single coax link. This link extends up to 250 metres, so it is ideal for situations beyond the 100m limit of CAT cable, as well as for extending the short range of Wi-Fi repeaters. The EOC adapters allow a ‘mesh’ network of up to 16 points, so every coax point in the home can become a Gigabit Ethernet outlet. This provides the optimum wired and wireless connectivity in every room of the house.

4

LEGRAND Products – Home Automation

In the UK, Legrand has developed a customer-focused structure, which harnesses the power of its market-leading specialist brands to deliver innovative, integrated solutions for every phase of construction.

ARTEOR™

Arteor is a stylish home automation system that gives users the facility to control their home from wherever they are. The system can integrate the control of lighting, heat-ing, blinds, climate, audio, door entry and also provide household energy management information. It is easy to install, programme, and has an extensive range of high-quality finishes with matching audio visual and 240v outlets.

Arteor utilises standard UK back boxes, designed and manufactured for the European market with full UK-based support. The functions and applications can be customised at will, acting as the home’s brain; it allows users to create their own living scenarios from setting a quiet ambience to enjoying an evening at home with friends.

5

BTICINO®

The Bticino range of door entry products perfectly complements Arteor Home Automa-tion Systems. It has solutions for both simple single dwellings and large apartment blocks. The Bticino range incorporates video and audio handsets, plus a stylish range of hands-free internal units; monobloc, modular or vandal-resistant entrance panels, and a variety of technologies to suit every application. It is both scalable and versatile, with budget and high-end interfaces, Bticino truly offers a solution for all.

NUVO®

Nuvo whole home audio systems guarantee an incomparable listening experience, with wired and wireless distributed audio solutions. These have been designed specifically to match incredible fidelity with the latest in streaming source variety and intuitive control. Nuvo is easy to install and even easier to enjoy, the system is the perfect fit for any home. It also fully integrates with Legrand’s Arteor and Vantage automation systems.

VANTAGETM

Vantage solutions offer unparalleled levels of home automation. This system provides full control of lighting, blinds, AV Equipment, heating, air conditioning as well as securi-ty and access. Vantage allows full conditional programming and has a range of sensors that include light, motion, pressure, rain and wind.

All this coupled with Vantage’s impressive library of 3rd-party drivers gives the integra-tor a tool bag for full integration of the whole home in one comprehensive software interface – including smart device control.

6

PURELINK Products – Video Distribution

Since 2001, PureLink has pioneered a powerful line of matrix-switching, format conver-sion, signal distribution, and long-distance extension systems that are optimised to support any consumer or commercial application. PureLink products are used in some of the world’s most demanding and high-profile projects, such as the world’s largest superyacht, major global fashion retailers, stores of the world’s leading phone manu-facturer, major defence command, control and simulation systems, because of their quality, reliability and innovative advantages.

Latest Ultra HD/4K Technologies

From its flagship PureMedia™ Cross-Platform Matrix Switching Systems to the installer-friendly HDTools™ line of video distribution components and accessories, PureLink products ensure that whatever the application, there is a solution ready to deliver full Ultra HD/4K signal transmission.

PureMedia™ Matrix Switching & Extension

All PureMedia™ matrix chassis are fully customisable with a complete range of 4K input/output cards and extenders, featuring proprietary Don’t Blink 4K Up/Downscaling Technology powered by Motore™. Together with its universal, cross-platform architec-ture up to 256x256, wall plate and rack mountable extension packages, and compre-hensive options, such as Quad View outputs, PureMedia™ truly covers all the bases in Ultra HD - smart, functional, scalable, state-of-the-art, ready.

Benefits include:

• Fully modular and expandable chassis from 8x8 to 256x256• Cross-platform switching technology supports HDMI, DVI, 3G/HD-SDI,• VGA/Component, Fibre, and HDBaseT• Ultra HD/4K support with Motore™ 4K Up/Downscaling• Don’t Blink™ seamless switching• Quad view output• Advanced EDID management• Bi-directional RS-232/LAN control

Ultra HD 4K Scaling Technology

PM-16X Front View

PM-16X Rear View

7

HDTools™ HDMI 2.0a, HDCP 2.2, HDR and CEC Matrix Switching & Extension

PureLink’s third generation of its HDTools HX Series HDMI Integrated Matrix Switchers support the latest technologies in Ultra HD/4K transport, including HDMI 2.0a, HDCP 2.2, and CEC support. e HX-4400-UX and HX-8800-UX provides switching of up to four or eight Ultra HD/4K inputs with advanced EDID management, delivering consistent connectivity and quick, clean switching from source to display for a seamless presenta-tion experience.

Benefits include:

• 4x4 or 8x8 HDMI 2.0a matrix switching• Resolutions up to 4K@50/60Hz (4:4:4 pixel format)• HDMI 2.0a, HDCP 2.2, HDR and CEC support – all ports• Advanced EDID management• Bi-directional RS232/LAN control• Tidy, space and energy efficient racks

EZH 2.0 HDMI 2.0a over Fibre cable

The EZ-H 2.0 offers the easiest install solution for HDMI, supporting resolutions up to 4K@60Hz over long cable runs (up to 100 metres) without the need for additional extenders. With its ultra-thin, flexible cable and small connector, the EZ-H 2.0 delivers ultimate reliability and convenience.

Benefits include:

• Resolutions up to 4K@50/60Hz (4:4:4 pixel format)• HDMI 2.0a, HDCP 2.2, HDR and CEC support• Pre-terminated length up to 100 metres (328 ft.)• Plenum rated• Incorporates active transceivers inside connectors• Immune from electrical noise (EMI & RFI)

HX-8800-UX

HX-4400-UX

8

DEMOPAD Products - Home Automation and Control

DemoPad was established in 1999, and has been offering bespoke software solu-tions and hardware integration services since that time. DemoPad is now recognised throughout the world as one of the most highly qualified home automation control companies.

CENTRO 8

The CENTRO 8 represents a quantum leap in home automation, bringing advanced au-tomation capabilities to the masses, with an affordable control processor and state of the art embedded software. It is easy to get started working with DemoPad regardless of how much experience the installer has working with control systems.

The DemoPad solution communicates via Wi-Fi from Android and IOS devices to any-thing with an IP address, to send commands, request feedback status etc. Anything can be controlled via Infra-Red /RS232/Contact Closure (using an IP gateway). It can also control commands sent directly through the local area network, such as XBMC, Insteon, Z-Wave and KNX. Our installers around the world have interfaced with almost any manufacturer’s equipment, including Sony, Panasonic, LG, Sharp, Epson, Onkyo, Yamaha, etc.

Teleste HAV offers training courses and support services, in order for integrators at all levels to confidently install seamless control and automation systems into any building environment. During the one-day course, a DemoPad partner will learn how to navigate the software program, design a unique user interface and integrate 3rd-party control drivers. Further advanced courses, specification and programming services are also available, providing support for an installation partner at every stage of the DemoPad experience.

9

CENTRO-C IP Control Gateway

The CENTRO-C can access 50 IO Ports from a single professional unit through the launch of their new IP control gateway. The product is an affordable, 19-inch, rack-mountable, control gateway, which can be used with any control system capable of sending TCP IP commands. The CENTRO-C is the heart of the control system, provid-ing a link from the network devices / control system to Infra-Red, RS232 and contact closure devices.

Benefits include:

• FREE App and FREE Pro Graphics included for iOS and Android• 50 individually addressable connectivity ports• Multiple TCP client connectivity• Seamless integration with existing DemoPad software projects• Can be used with any compatible 3rd-party control system / app

Key CENTRO-C features:

• CENTRO-C Connectivity Ports• 16 x individually addressable infra-red output ports• 6 x individually addressable bi-directional RS232 COM ports• 12 x low-voltage contact closure relay outputs• 16 x volt-free digital inputs for connecting PIR sensors etc.• 1 x USB port for firmware updates• 1 x Ethernet LAN port

10

ZeeVee Products

ZeeVee encoder/modulators convert video sources, such as signage players and satel-lite receivers, into DTV channels that are broadcast over the existing coaxial, and CatX cabling as a freeview signal to an unlimited number of HDTVs. ZvPro and HDbridge’s broadcast technology eliminates the need for special equipment (including transmit/ receive devices). It is the easiest and most reliable way to distribute HD video to mul-tiple HDTVs. It is the ideal solution to distribute HD video throughout a facility, replace multiple signage players, and for commercial or residential projects.

4K over IP - ZyPer4K

The ZyPer4K supports distribution of ultra-high definition, uncompressed 4K content, audio and other data signals using an o-the-shell 10Gb Ethernet switching technology. It uses a cost-reducing 10Gb network infrastructure, which is usable for all IP services, differentiating it from matrices, as it is not a stranded investment. The ZyPer4K can also be used in a point-to-point configuration to transmit a 4K video source across a dedicated connection to a display of up to 30 km away. It is designed to include facilities or campuses that have the need to switch digital sources (e.g. digital signage players, such as set-top boxes, PCs/Macs, media players, cameras, video conferencing systems) through utilising the existing infrastructure – to multiple discrete displays (in-cluding panels, projectors, video walls). It has a flexible configuration, as it is not a fixed chassis size and finally, the telnet commands promote easy control.

HD over Coax and IP – ZeeVee Encoders and Modulators

ZeeVee encoder/modulators convert video sources such as signage players and satel-lite receivers into DTV channels that are broadcast over the existing coaxial cabling as a freeview signal to an unlimited number of HDTV’s. ZvPro’s broadcast technology eliminates the need for special equipment (including transmit/receive devices). It is the easiest and most reliable way to distribute a few channels of HD video to multiple HDTV’s. It is the ideal solution to distribute HD video throughout a facility, replace mul-tiple signage players and for commercial or residential projects.

Key benefits:

• HDMI, Component or VGA inputs — address the needs of all deployments• Good, Better and Best Video quality choices— SD, HD or 4K/UHD• Single, dual and quad channel versions in small fan-cooled packages — for simple,

reliable installation anywhere!• Shelf or optional rack mount• Use existing cabling, including coax, CatX, and fibre• RF Video Compatible with any HDTV• HDMI and HD-SDI input stream• RF and IP outputs

11

Cables, Connectors and Tools

Teleste HAV have been supplying cables, connectors and tools to installers for well over 15 years and understand what an installer needs in order to complete a success-ful installation. We have saved installers hundreds of man hours, as we were the first company in the UK to introduce the benefits and simplicities of ‘one piece’ connectors. We can also help with your electronic cable testing and analysing requirements.

We supply an extensive range of cables, including RG59, RG6, CT100 (Equivalent Sky Approved), CT125 Mini RG59 RGB Coax (single, 3, 5 and 8 core available) Cat5e, Cat6 cables, speaker cables (16/2, 16/4 etc.) control cables (Arteor, Vantage, Crestron, Lu-tron etc.) HDMI, Fibre Optic and custom-made cable assemblies.

Ethereal MHY Series HDMI cables bring out the best picture and sound quality that enhanced components were built to deliver. The incredible data transfer speeds and Ethernet support, MHY Series HDMI cables let you plug in to a better home theatre ex-perience; supporting resolutions up to 4K, the MHY Series HDMI cables are ready for all HD formats, including 3D, Blu-ray, satellite, cable and Internet. All MHY Series are DPL Certified and CL rated and come with a life-time warranty.

We supply an extensive range of ‘one piece’ con-nectors, types including F connectors and BNC for CT100F, CT125F, RG6, RG 59, as well a full range of connectors for Mini RGB coax cable and the Unique EZRJ45 connector system. The EZ RJ45 system of-fers time-saving reliable termination of Cat5e, Cat6 shielded and unshielded cables.

At Teleste, we pride ourselves on providing installers with products that make life easier when on site.

Training and SupportOur experts at Teleste have in-depth product knowledge to help assist with all installa-tion requirements. We provide in-house training, in our state-of-the-art demo room, on both the Vantage and Arteor home automation systems and offer ongoing support for our installers and integrators throughout their projects.

Teleste also provides full training for the DemoPad range of products, including ap-plication programming. We have extensive knowledge of HDMI distribution and how to make it work the first time; this is why Teleste is the preferred partner for AV integra-tors and installers.

12

Teleste Hospitality and AV SolutionsUnit A Chiltern Commerce Centre

Asheridge Road, CheshamBuckinghamshire, HP5 2PY, UK

Tel. +44 (0) 1494 79770www.telestehospitality.com P

5P

_Tel

este

Hos

pita

lity

and

AV

pro

duct

cat

alog

ue_0

1/1

6 C

opyr

ight

© 2

01

6 T

eles

te C

orpo

ratio

n. A

ll rig

hts

rese

rved

. TEL

ESTE

is a

reg

iste

red

trad

emar

k of

Tel

este

Cor

pora

tion.

About Teleste Hospitality and AV Solutions

Teleste is an international technology company, based in Finland, which develops and offers video and broadband technologies and related services. The core business of Teleste is video and data processing, transfer and management. Teleste HAV, is a UK based business division working within the Teleste group, offer professional installers and integrators the very best audio visual, home automation and signal distribution equipment from leading manufacturers. We also offer cost-effective Data over Coax broadband and HDTV solutions for the hospitality sector. The equipment is ideal for hotels, yachts, student accommodation, hospitals and stadiums. Additionally, we provide a wide range of high quality cables, connectors and tools. Our team has a comprehensive knowledge of all of our products and solutions, and is available to offer support and technical assistance if needed.