Upload
lecong
View
256
Download
0
Embed Size (px)
Citation preview
WISCO CHINAWISCO CHINAWISCO CHINA
2013 version2013 version
Currently, WISCO’s capacity of hot rolled products is 13.4 million tons, in which hot rolled commercial products are about 6 million tons per year. The rests are mainly used for downstream producing procedures (such as cold rolling, coating and electrical steel products etc.).
Hot rolled steel capacity of WISCO
Production Line Width of Hot Rolling mill (mm)
Thickness(mm)
Width(mm) Design Capacity(million tons)
No. 1 Hot Strip Mill 1700 1.2~12.7 800~1550 3.8
No. 2 Hot Strip Mill 2250 1.5~25.4 1000~2130 4.5
No. 3 Hot Strip Mill 1580 1.2~12.7 730~1430 2.8
CSP Line 1800 0.8~12.7 900~1600 2.5
Total 13.6
▪ High-strength & Weathering Steel
Available Steel Grade, Delivery Standard & Function
Steel Grade Delivery Standard Function
S355MC, S420MC, S460MC, S500MC,
S550MCEN10149-2: 1995
Applied to manufacturing high-yield strength steel products or machining components for welding & cold forming usage.
S355J0W+AR, S355J2W+AR, S355K2W+AR, S355J0WP+AR, S355J2WP+AR
EN10025-5: 2004 Applied to making workshop building structure, manufacturing the railway vehicles and kinds of engineering components with improved atmospheric corrosion resistance.
WS460L4W WJX(RZ)428-2012
The series of products is with high-strength and high-plasticity with various cold forming, welding and/or machining, coating usages. The flat products reputed with strictly controlled level of size and flatness accuracy. Finished goods can be delivered as steel coils and slitting sheets.
Product Size
Steel Grade Steel Sheetmm
Steel Coilmm
S355MC, S420MC, S460MC, S500MC,
S550MC2.5~12.0×1000~2000×3000~16000 2.5~12.0×1000~2050×C
S355J0W+AR, S355J2W+AR, S355K2W+AR, S355J0WP+AR, S355J2WP+AR
2.5~12.0×1000~2000×3000~16000 2.5~12.0×1000~2050×C
WS460L4W 2.5~12.0×1000~2000×3000~16000 2.5~12.0×1000~2050×C
Size & Appearance Tolerance: as per EN10051
Chemical Composition(Wt%)
Steel Grade C Si Mn P S Cu Cr Ni Nb+V+Ti
S355MC ≤0.12 ≤0.50 ≤1.30 ≤0.025 ≤0.020 — — — ≤0.22
S420MC ≤0.12 ≤0.50 ≤1.50 ≤0.025 ≤0.020 — — — ≤0.22
S460MC ≤0.12 ≤0.50 ≤1.60 ≤0.025 ≤0.015 — — — ≤0.22
S500MC ≤0.12 ≤0.50 ≤1.60 ≤0.025 ≤0.015 — — — ≤0.22
S550MC ≤0.12 ≤0.50 ≤1.70 ≤0.025 ≤0.015 — — — ≤0.22
S355J0W+AR, S355J2W+AR, S355K2W+AR
≤0.16 ≤0.50 ≤1.50 ≤0.030 ≤0.030 0.25~0.55 ≤0.80 ≤0.65 —
S355J0WP+AR, S355J2WP+AR ≤0.12 ≤0.75 ≤1.00 ≤0.15 ≤0.030 0.25~0.55 ≤1.25 ≤0.65 —
WS460L4W ≤0.12 ≤0.75 ≤1.50 ≤0.025 ≤0.008 ≤0.55 ≤1.25 ≤0.65 —
Mechanical Property
Steel GradePlate
Thicknessmm
Yield Strength Rel
MPa
Tensile Strength Rm
MPa
Elongation A% 180°Cold Bend Test
d=Bend Diametera=Sample Thickness<3
L0=80mm
≥3L0=5.65√S0
S355MC 2.5≤T≤12.0 355 430 - 550 19 23 d=a
S420MC 2.5≤T≤12.0 420 480 - 620 16 19 d=a
S460MC 2.5≤T≤12.0 460 520 - 670 14 17 d=1.5a
S500MC 2.5≤T≤12.0 500 550 - 700 12 14 d=2a
S550MC 2.5≤T≤12.0 550 600 - 760 12 14 d=2a
S355J0W+AR, S355J2W+AR, S355K2W+AR
2.5≤T≤12.0 355 470-680 18 22 d=2a
S355J0WP+AR, S355J2WP+AR 2.5≤T≤12.0 355 470-680 18 22 d=2a
WS460L4W 2.5≤T≤12.0 460 560-760 18 22 d=2a
Conventional Continuous Hot-rolled Products▪ Shipbuilding Steel
This series of products has a strict control on chemical composition of steel as per requirements of domestic and international shipbuilding standards CCS, GL, BV, DNV, LR, NK, KR, RINA or GB712. The use of controlled-rolling and controlled-cooling process as per carbon equivalent in hot-rolling leads to stable chemical composition and excellent mechanical properties.
The surface of steel plates is flat, the edge is even, and the diagonal bias is small. The precision of size is high, and the thickness difference of the same plate is small. The steel, with about 0.1% copper, has a good corrosion resistance. The steel also has a good welding performance with a low carbon equivalent.
Available Steel Grade, Delivery Standard & Function
Steel Grade Delivery Standard Function
A、B、D、A32、D32、A36、D36
Corresponding Shipbuilding Standard
GBT/712
Mainly for manufacturing superstructures, sterns, helms and separated helms of ocean-going ships, and the hull and superstructure of inland ships.
Product Size
Steel Grade Plate Thicknessmm
Plate Widthmm
Plate Lengthmm
A、B 2.5~25.4 900~2100 2000~16000
D、A32、D32、A36、D36 2.5~25.4 900~2100 2000~16000
Size & Appearance Tolerance:as per GB/T709.
Chemical Composition(Wt%)
Steel Grade C Mn Si P S Als Nb V
A ≤0.21 ≥2.5C ≤0.50 ≤0.035 ≤0.035 --— — —
B ≤0.21 ≥0.80 ≤0.35 ≤0.035 ≤0.035 — — —
D ≤0.21 ≥0.60 ≤0.35 ≤0.035 ≤0.035 ≥0.015 — —
A32 ≤0.18 0.90~1.60 ≤0.50 ≤0.035 ≤0.035 ≥0.015 0.02~0.05 0.05~0.10
D32 ≤0.18 0.90~1.60 ≤0.50 ≤0.035 ≤0.035 ≥0.015 0.02~0.05 0.05~0.10
A36 ≤0.18 0.90~1.60 ≤0.50 ≤0.035 ≤0.035 ≥0.015 0.02~0.05 0.05~0.10
D36 ≤0.18 0.90~1.60 ≤0.50 ≤0.035 ≤0.035 ≥0.015 0.02~0.05 0.03~0.10
Remarks:Above are chemical compositions of steel (CCS).
Mechanical Property(CCS)
Steel Grade
Yield Strength
RelMPa
Tensile Strength Rm
MPa
ElongationA%
Impact Test
Temperature℃
Ballistic Work Akv(J)
vertical horizontal
A ≥235 400~520 ≥22 — — —
B ≥235 400~520 ≥22 0 ≥27 ≥20
D ≥235 400~520 ≥22 -20 ≥27 ≥20
A32 ≥315 440~590 ≥22 0 ≥31 ≥22
D32 ≥315 440~590 ≥22 -20 ≥31 ≥22
A36 ≥355 490~620 ≥21 0 ≥34 ≥24
D36 ≥355 490~620 ≥21 -20 ≥34 ≥24
This series of products has low chemical composition and high-intensity, i.e. C and Mn content lower than that of all similar products at the same intensity level in China. And the plasticity is better. Given full play to the advantages of controlled-rolling and controlled-cooling of the equipments, high-performance products can be produced with low chemical composition. This will help improve the plasticity, the toughness, the cold stamping performance and the welding performance of steel. The specific hot-rolled process as per carbon equivalent
will help improve the precision of product size and bring about high hit rate. Goods can be delivered as steel plates, steel coils and slitting strips to meet different needs of users.
▪ General Carbon Constructional Steel
Available Steel Grade, Delivery Standard & Function
Steel Grade Delivery StandardCorresponding
Foreign Standard & Steel Grade
Function
SS400 JIS G3101 Widely used in manufacturing general structures and stampings for engineering machinery, transportation machinery, construction machinery, hoisting machinery, agricultural machinery and light industry for civil use etc.
S235JR+ARS235J0+ARS275JR+ARS275J0+AR
EN10025-2:2004
Product Size
Steel Grade Steel Platemm
Steel Coil(able to deliver as original reel)
mm
SS400、SS330、S235JR+AR、S275JR+ARS235J0+AR、S275J0+AR
2.0~16.0×900~2100×2000~16000 2.0~16.0×900~2130×C
▪ Size & Appearance Tolerance
Steel Grade Appropriate Standard
SS400 JIS G3101
S235JR+AR S275JR+ARS235J0+AR, S275J0+AR EN10025-2:2004
▪ Chemical Composition(Wt%)
Steel Grade C Si Mn P S Cu
SS400 — — — ≤0.050 ≤0.050 —
S235JR+AR ≤0.17 — ≤1.4 ≤0.035 ≤0.035 ≤0.55
S275JR+AR ≤0.21 — ≤1.5 ≤0.035 ≤0.035 ≤0.55
S235J0+AR ≤0.17 — ≤1.4 ≤0.030 ≤0.030 ≤0.55
S275J0+AR ≤0.18 — ≤1.5 ≤0.030 ≤0.030 ≤0.55
▪ Mechanical Property(I)
Steel Grade
Yield Strength RelMPa Tensile
Strength Rm
MPa
Elongation A%
thickness(mm) Thickness(mm)
≤16 >16~≤25 ≤5 >16~≤16 >16
SS400 ≥245 ≥235 400~510 ≥21 ≥17 ≥21
Steel Grade
Yield Strength RelMPa
Tensile Strength RmMPa
Elongation A%
thickness(mm) thickness(mm) L0=80mm L0=
≤16 >16~≤25 <3 ≥3~
<25>1.5~≤2
>2~≤2.5
>2.5~<3 ≥3~<40
S235JR+AR ≥235 ≥225 360~510 360~510 ≥19 ≥20 ≥21 ≥26
S235J0+AR ≥235 ≥225 360~510 360~510 ≥17 ≥18 ≥19 ≥24
S275JR+AR ≥275 ≥265 430~580 410~560 ≥17 ≥18 ≥19 ≥23
S275J0+AR ≥275 ≥265 340~500 410~560 ≥15 ≥16 ≥17 ≥21
▪ Mechanical Property(II)
065.5 S
This series of products is with clean steel and low content of P and S. The composition of C and Mn is low, and the process of controlled-rolling and controlled-cooling as per carbon equivalent is used. This leads to moderate intensity, high plasticity, good cold stamping performance and good welding performance. The structure of plates is homogeneous with small grains, and the difference of mechanical properties between vertical and horizontal is small. The surface is flat and smooth with good coating performance. Goods can be delivered as steel plates, steel coils and slitting coils to meet different needs of users.
▪ Carbon Constructional Quality Steel
Available Steel Grade, Delivery Standard & Function:
Steel Grade Delivery Standard
Corresponding Foreign Standard & Steel
GradeFunction
SAE1010、SAE1008、SAE1006
ASTM A568/A568M 91a
Applicable to manufacturing cold stampings and structural pieces for automobiles, tractors, motorcycles and small- and medium-sized light industrial machinery for civil use.
▪ Product Size
Steel Grade Steel Plate (mm) Steel Coil(able to deliver as original reel)(mm)
SAE1010、SAE1008、SAE1006
2.0~16.0×900~2100×2000~16000 2.0~16.0×900~2130×C
▪ Size & Appearance ToleranceSteel Grade Appropriate Standard
SAE1010、SAE1008、SAE1006 ASTM A568M
▪ Chemical Composition(Wt%)
Steel Grade C Si Mn P S Cu
SAE1010 0.08~0.13 — 0.30~0.60 ≤0.04 ≤0.050 —
SAE1008 ≤0.10 — ≤0.50 ≤0.04 ≤0.050 —
SAE1006 ≤0.08 — ≤0.45 ≤0.04 ≤0.050 —
This series of products is with clean steel and low content of P and S. The plasticity is high, the re-processing ability is high and the welding performance is good. The quality is stable with small grains, small difference of mechanical properties between vertical & horizontal and flat smooth surface. It is widely used in many areas.
Available Steel Grade, Delivery Standard & Function
Steel Grade Delivery Standard Function
SPHC, SPHD, SPHE JIS G3131 For general structural pieces and stampings
Product Size
Steel Grade Steel Platemm
Steel Coil(able to deliver as original reel)(mm)
SPHC, SPHD, 1.8~14.0×900~2100×2000~16000 1.8~14.0×900~2130×C
SPHE 1.8~6.0×900~2100×2000~12000 1.8~6.0×900~2130×C
▪ Low-carbon Mild Steel
▪ Size & Appearance ToleranceThickness Tolerance:
Steel Grade Appropriate Standard
SPHC, SPHD, SPHE JIS G3131
Width, Length & Appearance ToleranceSteel Grade Appropriate Standard
SPHC, SPHD, SPHE JIS G3193
Chemical Composition(Wt%)
Steel Grade
C Si Mn P S Cu
SPHC ≤0.15 — ≤0.60 ≤0.050 ≤0.050 —
SPHD ≤0.10 — ≤0.50 ≤0.040 ≤0.040 —
SPHE ≤0.10 — ≤0.50 ≤0.030 ≤0.035 —
Mechanical Property(I)
Steel Grade
TensileStrengthRmMPa
Elongation A%
Tensile Sample
180°Cold Bend Testd =Bend Diameter
a=Sample ThicknessThickness(mm)
≥1.2~<1.6
≥1.6~<2.0
≥2.0~<2.5
≥2.5~<3.2
≥3.2~<4.0
≥4.0
Thickness(mm) Sample
<3.2 ≥3.2
SPHC ≥270 ≥27 ≥29 ≥2
9 ≥29 ≥31 ≥31 5# Sample
L
d=0a d=0.5a 3# Sample
LSPHD ≥270 ≥3
0 ≥32 ≥33 ≥35 ≥37 ≥3
9 — —
SPHE ≥270 ≥31 ≥33 ≥3
5 ≥37 ≥39 ≥41 — —
Mechanical Property(II)
Steel Grade
Yield Strength RelMPa Tensile
Strength RmMPa
Elongation A %
A80mm A
Thickness(mm) Thickness(mm)
≥1.5~<2 ≥2~≤8 ≥1.5~<2 ≥2~<3 ≥3
DD11 170~360 170~340 ≤440 ≥23 ≥24 ≥28
DD12 170~340 170~320 ≤420 ≥25 ≥26 ≥30
DD13 170~330 170~310 ≤400 ≥28 ≥29 ≥33
This series of products is with high-strength and good plasticity. The performance is stable, the precision of size is high, and shape of plates is good with smooth surface. Finished goods can be delivered as steel plates, steel coils and slitting strips.
Available Steel Grade, Delivery Standard & Function:Steel Grade Delivery
StandardCorresponding Foreign Standard & Steel
Grade Function
Q295A
GB/T912GB/T3274
US: ASTM A572M Gr.42Germany, UK, France: EN10025 E295
Applicable to manufacturing the structures and welding pieces of various equipments such as machine building, transport vehicles, chemical equipments, transmission casings and intermediate pressure welding pipes.
Q295B US: ASTM A572M Gr.42Germany, UK, France: EN10025 S275JR
Q345A US: ASTM A572M Gr.50Germany, UK, France: EN10025 E335
Q345B US: ASTM A572M Gr.50Germany, UK, France: EN10025 S335JR
Q345C Germany, UK, France: EN10025 S355J0Q345D Germany, UK, France: EN10025 S355J2
S355J0+AR、S355JR+AR
DIN EN10025-2:2004
For mechanical engineering plants, used in producing high-strength welding structural pieces: booms, outriggers, frames, turntables etc; Also for automotive plants: used in stamping high-intensity automotive frames.
Gr.65, Gr.50 ASTM A572/ A572M
▪ Ordinary Low-alloy Steel
▪ Product Size
Steel Grade Steel Platemm
Steel Coil(able to deliver as original reel)(mm)
Q295, Q345A, Q235B、 2.5~25.4×900~2100×2000~16000 2.5~25.4×900~2130×CS355J0+AR, S355JR+AR、
Gr.65, Gr.50 2.5~16.0×900~2100×2000~16000 2.5~16.0×900~2130×C
▪ Size & Appearance ToleranceSteel Grade Appropriate Standard
Q295, Q345 GB/T709
S355J0+AR, S355JR+AR EN10051-2:2004
Gr.65, Gr.50 ASTM A572/ A572M-03a
▪ Chemical Composition(Wt%)
Steel Grade Quality Grade C Mn Si P S V Nb Ti Al N
S355J0+AR ≤0.18 ≤1.60 ≤0.5
5 ≤0.025 ≤0.025 — 0.020~
0.035 — — ≤0.011
S355JR+AR ≤0.21 ≤1.60 ≤0.5
5 ≤0.025 ≤0.025 — 0.020~
0.035 — — ≤0.011
Gr.65 ≤0.23 ≤1.65 ≤0.4
0 ≤0.040 ≤0.050 — — — — —
Gr.50 ≤0.23 ≤1.35 ≤0.4
0 ≤0.040 ≤0.050 — — — — —
▪ Mechanical Property
Steel Grade
Yield Strength Rel
MPa
Tensile Strength Rm
MPa
Elongation A %
L0=80mm L0=
2 in. 50mm
8 in. 200mm
thickness(mm)
Thickness(mm)
thickness(mm)
≤16>16~≤25
<3 ≥3~≤25
>1.5~≤2
>2~≤2.5
>2.5~≤3
>3~≤40
S355J0+AR ≥355 ≥345 510~680
470~630
≥14 ≥15 ≥16 ≥20 — —
S355JR+AR ≥355 ≥345 ≥16 ≥17 ≥18 ≥22 — —
Gr.65 ≥450 ≥450 ≥15 ≥17 — — — — ≥17 ≥15
Gr.50 ≥345 ≥345 ≥18 ≥21 — — — — ≥21 ≥18
065.5 S
▪ Welded Pipe Steel
This series of products are produced as per foreign standards, with a stable forming, low C content, good welding performance and high-intensity. Moreover, they have small anisotropy of mechanical properties, and a good cold-, crack- and corrosion-resistance.
Available Steel Grade, Delivery Standard & Function
Steel Grade Delivery Standard Function
SPHT1, SPHT2, SPHT3 JIS G3132 Applicable to manufacturing structure & welding pieces of IP welded pipes and other equipments.
Product Size
Steel Grade Steel Coil(able to deliver as original reel)mm
SPHT1 2.0~8.0×900~2130×C
SPHT2 2.0~12.7(16)×900~2130×C
SPHT3 2.0~ 12.7(18)× 900~2130×C
Size & Appearance Tolerance
Steel Grade Standard
SPHT1、SPHT2、SPHT3 JIS G3132
Chemical Composition(Wt%)
Steel Grade C Mn Si P S
SPHT1 ≤0.10 ≤0.50 ≤0.35 ≤0.040 ≤0.040
SPHT2 ≤0.18 ≤0.60 ≤0.35 ≤0.040 ≤0.040
SPHT3 ≤0.25 0.30~0.90 ≤0.35 ≤0.040 ≤0.040
Mechanical Property
Steel Grade
Tensile
StrengthRm
MPa
ElongationA (%)
TensileSample
180°Cold Bend Testd =Bend Diameter
a=Sample Thickness
≥1.2~<1.6
≥1.6~<3.0
≥3.0~<6.0
≥6.0~
≤13
Thickness(mm)Sample
≤3.0 >3.0~13
SPHT1 ≥270 ≥30 ≥32 ≥35 ≥37
#5 Sample
d=0a d=0.5a
#3 Sample
SPHT2 ≥340 ≥25 ≥27 ≥30 ≥32 d=5a d=1.5a
SPHT3 ≥410 ≥20 ≥22 ≥25 ≥27 d=1.5a d=2a
A special rolling unit for centralized rolling has been established in the production process of this series of products. The key technical parameters are strictly controlled and managed. The physical indicators of quality are much higher than the corresponding values of the JIS standard. The addition of rare earth microelements has improved the form of harmful inclusion such as sulfide, so that SPA-H & SM490A steel has an excellent cold-bending processability. The accuracy to thickness of the steel plates is high and the difference between vertical thickness and horizontal thickness is small. The steel plates have good shape and surface quality after rolling and levelling. The use of converter in steel-making and in-mold feeding rare earth wire pouring in continuous casting has made the steel clean with low content of P & S.
▪ Container Steel
Product Size
Steel Grade Steel Sheetmm
Steel Coilmm
Steel Stripmm
SPA-H1.6~8.0×900~2100
×2000~16000 1.6~8.0×900~2130×C 1.6~6.0×120~750×CSM490A
SS400
Size & Appearance Tolerance:as per JIS G3193。
Available Steel Grade, Delivery Standard & FunctionSteel Grade Delivery Standard Function
SS400 JIS G3101 Applied to manufacturing bottom plates and bottom rims of containers.
SM490A JIS G3106 Applied to manufacturing studs, doors and roofs of containers.
SPA-H JIS G3125 Applied to manufacturing panels, side plates and rims of containers.
Mechanical Property
Steel Grade
Plate Thickness
mm
Yield Strength
RelMPa
Tensile Strength
RmMPa
Elongation A%
180°Cold Bend Testd=Bend Diameter
a=Sample Thicknessb=35mmSample Value
SS400≤5.0 ≥245 400~510 #5 ≥21
d=3a>5.0~≤8.0 ≥245 400~510 #1A ≥17
SM490A
≤5.0 ≥325 490~610 #5 ≥22—
>5.0~≤8.0 ≥325 490~610 #1A ≥17
SPA-H≤6.0 ≥345 ≥480 #5 ≥22 d=a
>6.0 ≥355 ≥490 #1A ≥15 d=3a
Chemical Composition(Wt%)
Steel Grade C Si Mn P S Cu Cr Ni
SS400 — — — ≤0.050 ≤0.050 — — —
SM490A ≤0.20 ≤0.55 ≤1.60 ≤0.035 ≤0.035 — — —
SPA-H ≤0.12 0.25~0.75
0.20~0.50
0.07~0.15 ≤0.040 0.25~
0.600.30~1.25 ≤0.65
This product is with high strength, good plasticity and stable performance. The accuracy to size is high, and the shape of plate is good with smooth surface.
Available Steel Grade, Delivery Standard & Function
Steel Grade Delivery Standard Function
SN400B JIS G3136 Widely used in building structures.
Product Size
Steel Grade Steel Plate(mm)Steel Coil(able to deliver as
original coil)mm
SN400B 6.0~25.4×900~2100×2000~16000 26.0~25.40×900~2100×C
Size & Appearance Tolerance:as per Standard JIS G3193.
▪ Construction Steel
Chemical Composition(wt%)
Steel Grade C Si Mn P S
SN400B6~50 ≤0.20
≤0.35 0.60~1.40 ≤0.03 ≤0.015
50~100 ≤0.22
Mechanical Property
Steel Grade
Yield Strength RelMPa
Tensile Strength
RmMPa
Yield RatioRel/Rm
%
Elongation A(%)
Sample 1A
thickness(mm) thickness(mm)
≥6~<12 ≥12~40 ≥6~16 >16~50
SN400B ≤235 235~355 400~510 ≥80 ≥18 ≥22