Autumn/Winter 2014Issue 36

Valid until 31st March 2015

SUPPORTING YOUR LOCAL DISTRIBUTOR

Hotlist1961 / 1965 MicrometersSee page 9 for details.

Basic Combination Set 521 SeriesSee page 11 for details.

Value Line DBL CaliperSee page 5 for details.

XTA Analogue Bore GaugeSee page 4 for details.

25%SAVING

* Buy one and get the same size caliper FREE!

Buy one get one FREE!*

OFFER EXTENDED

NEW

Prices inclusive of setting ring and

UKASCalibration Certificate

10%SAVING

10%SAVING

117539_MW_Hotlist_October_2014_Issue36.indd 1 15/09/2014 09:14

BORE GAUGES

See back page for Your Distributor Details2

�� Bore Gauge Setting Master Kit for accurately setting any 2 point bore gauge up to 160mm in diameter to an accuracy of 0.01mm

�� Setting master and 33 piece metric gauge block set supplied in aluminium case

Setting Device

�� Internal range 160mm

�� Depth range 25mm

�� Centraliser width 70mm

�� Quick-release holder for fast adjustment

Gauge Block Set

�� Accuracy to DIN 861, Grade2

�� 33 piece metric steel set

�� Includes MOORE & WRIGHT certificate

Bore Gauge Setting Master Kit 720 Series

Bore Gauge Setting Master Kit

Code No Description List HotlistPrice Price

MW720-01 Bore Gauge Setting Master Kit £206.50 £176.00 T

15%SAVING

117539_MW_Hotlist_October_2014_Issue36.indd 2 15/09/2014 09:14

BORE GAUGES

Visit: www.moore-and-wright.co.uk 3

15%SAVING

�� Supplied with set of carbide tipped contact points

�� Unique self centring device

�� Supplied with dial indicator, resolution 0.01mm

�� Packed as set with all necessary accessories to measure the complete range as shown

Digital Bore Gauge Sets

�� Supplied with digital indicator with bar graph and numerical display

Moore & Wright Cylinder Bore Gauge Sets 316 Series

Cylinder Bore Gauges

Code No Range Resolution List Hotlist(mm) (mm) Price Price

MW316-02 10-18 0.01 £82.50 £70.50 TMW316-03 18-35 0.01 £68.50 £58.50 TMW316-04 35-50 0.01 £68.50 £58.50 TMW316-05 50-160 0.01 £74.00 £63.00 TMW316-06 160-250 0.01 £82.50 £70.50 T

Digital Bore Gauge Set

Code No Range Resolution Resolution Measuring Depth Measuring Depth List Hotlist(mm) (mm) (inch) (mm) (inch) Price Price

MW316-12D 35-160 0.001 0.0005 200 8 £422.00 £359.00 T

117539_MW_Hotlist_October_2014_Issue36.indd 3 15/09/2014 09:14

BORE GAUGES

See back page for Your Distributor Details4

�� Range 2-300mm (0.080"-12")

�� Graduation: 0.005mm

�� Tungsten carbide measuring faces on all 3-point heads from 12.5mm

�� Blind bore measurement from 2mm–6mm and above 12.5mm (0.500")

�� Extensions available above 6mm for deep hole measurement

�� Ratchet stop to ensure consistent measurement

�� Setting rings included with individual instruments and sets

�� UKAS certificate supplied as standard with all setting rings

�� UKAS certificate supplied as standard with all XT mechanical micrometers

�� Serial number on all gauges

�� Bore gauges manufactured according to DIN 863, part 4

�� Supplied in fitted case

�� Configured sets available

Prices inclusive of setting ring and

UKASCalibration Certificate

Mechanical Bore Gauge - XT Analogue

Code No Range Setting Ring List Hotlist Code No Range Setting Ring List Hotlist(mm) (mm) Price Price (inch) (inch) Price Price

XTA6M 6-8 8.00 £214.00 £193.00 C XTA6i 1/4-5/16 0.3125 £214.00 £193.00 CXTA8M 8-10 8.00 £222.50 £200.50 C XTA8i 5/16-3/8 0.3125 £222.50 £200.50 CXTA10M 10-12.5 12.50 £222.50 £200.50 C XTA10i 3/8-1/2 0.500 £222.50 £200.50 CXTA12M 12.5-16 12.50 £222.50 £200.50 C XTA12i 1/2-5/8 0.500 £222.50 £200.50 CXTA16M 16-20 20.00 £226.50 £204.00 C XTA16i 5/8-3/4 0.750 £226.50 £204.00 CXTA20M 20-25 20.00 £247.00 £222.50 C XTA20i 3/4-1 0.750 £247.00 £222.50 CXTA25M 25-35 35.00 £355.50 £320.00 C XTA25i 1-1 3/8 1.375 £355.50 £320.00 CXTA35M 35-50 35.00 £362.50 £326.50 C XTA35i 1 3/8-2 1.375 £362.50 £326.50 CXTA50M 50-65 65.00 £431.50 £388.50 C XTA50i 2-2 5/8 2.625 £431.50 £388.50 CXTA65M 65-80 65.00 £431.50 £388.50 C XTA65i 2 5/8-3 1/4 2.625 £431.50 £388.50 CXTA80M 80-100 80.00 £547.00 £492.50 C XTA80i 3 1/4-4 3.250 £547.00 £492.50 C

Sets: Supplied with individual instrument, setting rings and UKAS

Code No Range Measuring Setting List Hotlist Code No Range Measuring Setting List Hotlist(mm) Head Ring Price Price (inch) Head Ring Price Price

SXTA4M 10-20 3 2 £601.50 £541.50 C SXTA4i 3/8-3/4 3 2 £601.50 £541.50 CSXTA5M 20-50 3 2 £946.50 £852.00 C SXTA5i 3/4-2 3 2 £946.50 £852.00 CSXTA6M 50-100 3 2 £1,286.00 £1,157.50 C SXTA6i 2-4 3 2 £1,286.00 £1,157.50 C

Mechanical Bore Gauge - XT Analogue

10%SAVING

117539_MW_Hotlist_October_2014_Issue36.indd 4 15/09/2014 09:14

CALIPERS

Visit: www.moore-and-wright.co.uk 5

Value Line Digital Caliper 110 Series

Dial Caliper 142 Series

�� ABS / INC measurement

�� Large LCD display

�� On/off switch

�� Zero point at any position

�� Displays values in mm and inch

�� All metal parts made of hardened stainless steel

�� CR2032 battery

�� High-quality shockproof dial caliper

�� Rapid movement with thumb wheel

�� Covered rack

�� 4-way measurement

�� Standard yellow metric face

�� Hardened stainless steel rack

��Measuring surface is micro-lapped

Value Line Digital Caliper

Code No Range (mm) Range (inch) Resolution (mm) Resolution (inch) Jaws List PriceMW110-15DBL 0-150 0-6 0.01 0.0005 40mm £38.50 TMW110-20DBL 0-200 0-8 0.01 0.0005 50mm £66.50 TMW110-30DBL 0-300 0-12 0.01 0.0005 60mm £108.50 T

* Buy one and get the same size caliper FREE!

Buy one get one FREE!*

OFFER EXTENDED

Complies with: DIN 862

Complies with: DIN 862

15%SAVING

Dial Caliper 142 Series

Code No Range Resolution List Hotlist(mm) (mm) Price Price

MW142-15 0-150 0.02 £37.50 £32.00 TMW142-20 0-200 0.02 £49.00 £42.00 TMW142-30 0-300 0.02 £81.50 £69.50 T

117539_MW_Hotlist_October_2014_Issue36.indd 5 15/09/2014 09:14

HAND TOOLS

See back page for Your Distributor Details6

Moore & Wright Inside & Outside Calipers

��Manufactured from polished tool steel

�� A large headed nut & screw assembly provides a firm & rigid friction joint, with no play

�� The sizes listed are the effective leg length which is measured from the joint assembly Note: Firm joint caliper capacities are generally

1/3 greater than the effective leg length.

Complies with: BS3123S

Inside Calipers Firm Joint

Code No Size List HotlistPrice Price

3306 150mm / 6" £7.70 £6.50 F3308 200mm / 8" £12.80 £10.50 F33012 300mm / 12" £21.50 £17.50 F

Outside Calipers Firm Joint

Code No Size List HotlistPrice Price

3316 150mm / 6" £9.70 £8.00 F3318 200mm / 8" £13.80 £11.50 F33112 300mm / 12" £35.50 £28.50 F33118 450mm / 18" £107.00 £86.00 F33124 600mm / 24" £157.50 £126.00 F

33163306

20%SAVING

117539_MW_Hotlist_October_2014_Issue36.indd 6 15/09/2014 09:14

HAND TOOLS

Visit: www.moore-and-wright.co.uk 7

Inside Calipers Spring Joint

Code No Size List HotlistPrice Price

513 75mm / 3" £15.90 £13.00 F514 100mm / 4" £15.90 £13.00 F516 150mm / 6" £17.40 £14.00 F518 200mm / 8" £24.50 £20.00 F5110 250mm / 10" £28.00 £22.50 F5112 300mm / 12" £31.50 £25.50 F

Outside Calipers Spring Joint

Code No Size List HotlistPrice Price

523 75mm / 3" £15.90 £13.00 F524 100mm / 4" £15.90 £13.00 F526 150mm / 6" £17.40 £14.00 F528 200mm / 8" £24.50 £20.00 F5210 250mm / 10" £28.00 £22.50 F5212 300mm / 12" £31.50 £25.50 F

Dividers Spring Joint

Code No Size List HotlistPrice Price

503 75mm / 3" £15.90 £13.00 F504 100mm / 4" £15.90 £13.00 F506 150mm / 6" £17.40 £14.00 F508 200mm / 8" £24.50 £20.00 F5010 250mm / 10" £28.00 £22.50 F5012 300mm / 12" £31.50 £25.50 F

526

516

506

Moore & Wright Inside & Outside Calipers

Outside Calipers, Spring Joint

�� Bow spring ensures uniform tension over working range

�� Centrally mounted adjustment screw offers finer setting than firm joint type

Inside Calipers, Spring Joint

�� Bow spring ensures uniform tension over working range

�� Centrally mounted adjustment screw

�� Manufactured from polished tool steel

Spring Dividers

��Manufactured from polished tool steel

�� Points are hardened to over 550Hv

�� Bow spring ensures uniform tension over working range

�� Centrally mounted adjustment screw Note: The nominal size is the distance between the centre

of the roller and the working ends of the legs.

Complies with: BS3123S

20%SAVING

117539_MW_Hotlist_October_2014_Issue36.indd 7 15/09/2014 09:14

See back page for Your Distributor Details8

WORKSHOP TOOLS

Moore & Wright Vee Blocks Standard Pairs

�� Supplied in matched and numbered pairs only

��Manufactured from close grained cast iron

�� Ground faces

Moore & Wright Surface Gauges

Universal type

�� Designed for precise marking out operations

�� Hardened and tempered steel base, ground on one end and bottom face

�� Vee groove for locating on cylindrical workpieces

�� Two retractable locating pins

�� Radial grooves in the side facilitate comfortable handling

�� One handed fine adjustment

�� Supplied with two interchangeable pillars and one 4mm diameter scriber

Fixed type

�� Budget surface gauge designed for general purpose use

�� Cast cylindrical base

�� Fixed pillar

�� Supplied with one 4mm diameter scriber Note: Surface gauges can be used for

mounting dial test indicators with either a 4mm or 6.35mm (1/4") mounting spigot.

Metric / Imperial Surface Gauges

Code No Description Size of Base Height Height List Hotlist(mm) (inch) Price Price

E101B Universal 80 x 65mm, 3 1/8 x 2 1/2" 225 & 300 9 & 12 £99.50 £85.00 FE102B Universal 105 x 85mm, 4 1/8 x 3 3/8" 300 & 450 12 & 18 £154.50 £131.50 FE1079 Fixed 68mm dia., 2 5/8" dia. 225 9 £53.00 £45.50 F

15%SAVING

25%SAVING

E102B

213

E1079

Vee Blocks Standard Pairs

Code No Accuracy Accuracy Range Range Width Width Length Length Height Height List Hotlist(mm) (inch) (mm) (inch) (mm) (inch) (mm) (inch) (mm) (inch) Price Price

211 0.04 0.0015 63 2.48 80 3.15 35 1.38 60 2.36 £115.50 £87.00 F212 0.04 0.0015 80 3.15 100 3.94 40 1.57 75 2.95 £136.00 £102.00 F213 0.05 0.0020 100 3.94 130 5.12 45 1.77 90 3.54 £178.50 £134.00 F214 0.05 0.0020 125 4.92 150 5.90 50 1.97 100 3.94 £240.50 £180.50 F215 0.06 0.0025 160 6.30 180 7.09 60 2.36 130 5.12 £364.50 £273.50 F216 0.06 0.0025 200 7.87 220 8.66 70 2.76 160 6.30 £537.50 £403.50 F

117539_MW_Hotlist_October_2014_Issue36.indd 8 15/09/2014 09:14

Visit: www.moore-and-wright.co.uk 9

MICROMETERS

Moore & Wright Traditional External Micrometer, 1966 Series

Moore & Wright Traditional External Micrometer, 1961 and 1965 Series with Carbide Anvils

All models feature

�� Tungsten carbide measuring faces

�� 6.5mm spindle diameter

�� ’Speeder’ type ratchet

�� Locking lever

�� Choice of standard or vernier type sleeve

�� Supplied in plastic pocket case

�� Adjusting key

1961 Series features

�� Capacity of 0-25mm / 0-1"

�� Pearl chrome plated frame with insulation pads

1965 Series features

�� Capacity from 0-25mm / 0-1"

�� Blue textured frame finish

�� Tapered bow frame

�� Tungsten carbide measuring faces

�� 6.5mm spindle diameter

�� Blue textured frame finish

�� ‘Speeder’ type ratchet

�� Locking lever

�� Adjusting key

�� Supplied in case

�� Choice of standard or vernier type sleeve

�� Tapered bow frame

Complies with: BS870, DIN 863/1, ISO3611

1961MB

1965M

25%SAVING

VISIT WWW.BOWERS.CO.UK TO VIEW OUR FULL RANGE

OF MICROMETERS

Mechanical External Micrometer - Imperial: 0-1" and Metric 0-25mm

Range Range 0.001" 0.01mm List Hotlist 0.0001" 0.002mm List Hotlist(mm) (inch) Reading Price Price Reading Price Price0-25 0-1 1961 1961M £53.00 £40.00 T 1961B 1961MB £60.00 £45.00 T0-25 0-1 1965 1965M £37.50 £28.50 T 1965B 1965MB £43.00 £32.50 T

Mechanical External Micrometer - Imperial: 1-6"

Range 0.001" List Hotlist 0.0001" List Hotlist(inch) Price Price Price Price1-2 19662 £53.00 £40.00 T 1966B2 £60.00 £45.00 T2-3 19663 £70.50 £53.00 T 1966B3 £76.00 £57.00 T3-4 19664 £78.50 £59.00 T 1966B4 £84.50 £63.50 T4-5 19665 £86.00 £64.50 T 1966B5 £91.00 £68.50 T5-6 19666 £89.00 £67.00 T 1966B6 £93.00 £70.00 T

Mechanical External Micrometer - Metric: 25-150mm

Range 0.01mm List Hotlist 0.002mm List Hotlist(mm) Price Price Price Price25-50 1966M50 £53.00 £40.00 T 1966MB50 £60.00 £45.00 T50-75 1966M75 £70.50 £53.00 T 1966MB75 £76.00 £57.00 T75-100 1966M100 £78.50 £59.00 T 1966MB100 £84.50 £63.50 T100-125 1966M125 £86.00 £64.50 T 1966MB125 £91.00 £68.50 T125-150 1966M150 £88.00 £66.00 T 1966MB150 £93.00 £70.00 T

25%SAVING

117539_MW_Hotlist_October_2014_Issue36.indd 9 15/09/2014 09:14

See back page for Your Distributor Details10

MATERIALS TESTING

Portable MTR110 Surface Finish Tester

�� Back-light LCD

�� Dynamic Test Display: progress of cut-off length during testing

�� Li-ion rechargeable batteries

�� Protection slide on pick-up

�� Auto-off after 90 seconds

�� Pocket-size and economically priced

�� Both Ra and Rz parameters in one instrument

�� Features external calibration specimen

Rz and Ra:

�� Rz is the mean of all of the maximum peak to valley heights, from each sampling length, within the assessment length.

�� Ra is the universally recognised and most used international parameter of roughness. It is the arithmetic mean of the absolute departures of the roughness profile from the mean line.

Portable Surface Roughness TesterPortable Surface Roughness Tester

Code No Description List Price Hotlist PriceMTR-110UK Surface Roughness Tester complete with charger £920.50 £828.50 Q

10%SAVING

Analogue Hardness Tester

Code No Description List Price Hotlist PriceW-600A Analogue Hardness Tester £1,172.00 £1055.00 I

10%SAVING

Analogue Rockwell Type Hardness Tester W-600A

�� Basic regular Rockwell bench tester range offering accuracy, reliability and durability at an extremely affordable price

�� Direct analogue display of HRC, B, A, F

�� Rugged construction, will withstand toughest environments

�� Standard delivery includes range of test anvils, indenters and test blocks

�� Accuracy conforms to EN-ISO 6508 and ASTM-E18

�� Large capacity to accommodate large test specimens

Manual bench hardness tester for regular Rockwell scales.

117539_MW_Hotlist_October_2014_Issue36.indd 10 15/09/2014 09:14

Visit: www.moore-and-wright.co.uk 11

HAND TOOLS/LEVELLING

Basic Combination Set 521 Series

Moore & Wright Engineers’ Levels

�� Three measuring heads are attached to the stainless steel ruler, allowing versatile measurements on various types of work pieces

�� Square head, protractor head and centre head

�� For various measuring and marking applications

�� Hardened and ground slide ways

�� Stainless steel rule with engraved graduations; one side metric, one side imperial

��Main vial sensitivity of 1 minute

�� Each level is fitted with a main, cross and plumb vial

��Main vial protected by rotating shroud

�� Vial solution maintains colour and fluidity under all workshop conditions

�� Precision ground cast base with vee groove for location on cylindrical work

Basic Combination Set 521 Series

Code No Description List Price Hotlist PriceMW521-01 4 piece set £87.00 £78.50 T

NEW

Metric / Imperial Engineers’ levels

Code No Length Length Width Width Height Height Resolution Resolution List Hotlist(mm) (inch) (mm) (inch) (mm) (inch) (mm) (inch) Price Price

ELS 165 6.5 34 1.34 46 1.81 0.3mm per metre 0.0035" per foot £177.50 £142.00 VELM 310 12 36 1.42 58 2.28 0.3mm per metre 0.0035" per foot £121.00 £97.00 V

ELS

ELM

10%SAVING

20%SAVING

117539_MW_Hotlist_October_2014_Issue36.indd 11 15/09/2014 09:14

DISTRIBUTED BY: CAT: LIT1036G

MOORE & WRIGHT

Tel: 08708 50 90 50sales@moore-and-wright.co.ukwww.moore-and-wright.co.uk

Visit: www.moore-and-wright.co.uk

INDICATORS

�

Digital Indicator 405 Series

�� Direct Inch / Metric conversion

�� 58mm dial face

�� Lugback and 8mm stem mountings

�� Resolution 0.01mm / 0.0005"

�� Absolute / Incremental reading

�� Floating Zero

�� Also supplied with flatback

�

Moore & Wright low cost digital indicator manufactured to withstand the rigours of shop floor use. Easy to use functions accessed via three buttons.

Digital Indicator 405 Series

Code No Range Range Accuracy Accuracy List Hotlist(mm) (inch) (mm) (inch) Price Price

MW405-04DB 0-12.7 0-0.5 0.02 0.0008 £53.00 £45.50 TMW405-06DB 0-25.0 0-1.0 0.03 0.0012 £64.50 £55.00 T

15%SAVING

117539_MW_Hotlist_October_2014_Issue36.indd 12 15/09/2014 09:14