Why Mission?Experience. Reliability. Vision.

Mission’s management had an

integral role in developing data

cellular transport technologies with

Bell South in 1996. In late 1999, we

used that experience to create

Mission. We were the first to bring

the technology to the water/waste-

water industry; first to transport

data on the digital cellular system;

first to stream data continuously on

it and first to offer service on major

cellular systems. In all these areas,

Mission was the first and is still the

best. Nobody has near the experience,

volume of field units, or numbers of

satisfied customers.

When it’s critical, trust Mission.

So why don’t you get started

today? Our SCADA experts are waiting

to hear from you. Contact a Missionrepresentative at 1-877-993-1911 to

learn how we can deploy the right

solution to fit your needs, at a fraction

of the cost of building a customized

SCADA platform. Discover more

about the Mission approach

yourself by visiting our web site:

www.123mc.com.

©2013 Mission Communications. The Mission Communicationslogo is property of Mission Communications.

No part of this publication may be reproduced or transmitted bymeans of photocopying, scanning, or printing, without the priorwritten permission of Mission Communications.

Literature Code: #PB1- 0914

SPECIFICATIONSMODELSRemote Terminal Units (RTUs)

Manhole Monitor in-sewer overflow tracking and alarmsystem, 5+ year battery-powered and waterproof.

M110 real-time alarm system with hourly check-ins thatinclude pump reports, analog values and more.

M800 real-time alarm system with streaming data foranalog trending, real-time pump starts, optional automaticremote control and more.

Enclosures

Manhole Monitor self-contained, solid metal enclosureis IP68 rated for watertightness NEMA 1 aluminum indoor enclosure with battery insideNEMA 1 FlatPak in panel enclosure with battery outsideNEMA 4X water resistant, fiberglass outdoor enclosure

ELECTRICALDigital Inputs: 8 dry contact inputs on M110 and M800series support alarms, status, or accumulating pumpsruntimes/starts. The M110 and M800 can be expandedto 16 digital inputs. The Manhole Monitor in-sewer RTUhas 2 digital inputs that are typically used with floats tosense surcharge and high sewer level.

Built-in Inputs: The M110 and M800 RTUs have 4 built-ininputs: temperature, signal strength, battery voltage andA/C voltage. This status information is transmitted hourly.

Key Reader Input: The key reader, included with M110and M800 RTUs, allow on-site personnel to log a sitevisit and suspend alarms while service is performed atthe station. Management can track the key entries forproductivity and regulatory reporting purposes.

Analog Inputs: M110 and M800 RTUs come with 2 analoginputs to report pressure, level or any 4-20mA or 0-5Vinput from a transducer. The inputs can be expanded to 6 with the analog expansion board. Analog inputssupport 4 threshold alarms settings that can be remotelyconfigured.

Pulse Inputs (optional): 2 pulse inputs can be used toreport data such as flow, water meter or rainfall totals.If no rainfall data is monitored at the site, Mission’s website presents data from the closest National WeatherService reporting station.

Input Wiring Supervision: M110 and M800 RTU digitalinput wires use End-Of-Line resistors for wiring super-vision similar to fire alarm panels. Wiring supervisiondetects if wires break or become disconnected and thusunable to respond to alarm conditions.

Digital Outputs:The M110 and M800 series support 3relay outputs that can be remotely controlled. These areused for many purposes including turning on an emer-gency pump or security light. Multiple M800s can belinked so an event at one station causes a relay change atanother. Mission’s Tank and Well Control package relieson this feature.

Wet Well Module:The Model 110 and 800 have a quickconnect for the optional wet well module. This deviceconveniently packages 2 strap-on current sensors fortrue pump run information with a patented high levelfloat circuit that “T” taps into the existing high float.This greatly reduces installation time and provides for abattery backed up high float alarm. Now you can gethigh-level alarms even when there is no A/C power.

Power and Backup Power: The M110 and M800 RTUsoperate safely on 12V via the supplied UL recognizedtransformer.They include a 5 amp hour battery with acharging circuit that powers the units for 24-72 hoursduring a power failure.There is an automatic alarm forexternal power failure and low battery conditions. Theincluded 120VAC to 12VAC transformer mounts sepa-rate from the RTU to protect the main board and radiofrom voltage spikes. A solar panel option is available forremote locations. The Manhole Monitor unit includes asealed 5+ year life battery so no external power sourceis required.

(877) 993-1911sales@123mc.com

www.123mc.com

PHYSICALEnclosures

NEMA 1 Regular: 11" w x 11" h x 3.5" d

NEMA 1 FlatPak: 7.75" w x 10.5" h x 1.5" d

NEMA 4X: 13.25" w x 13.75" h x 5.5" d

Manhole Monitor: 9.01" w x 5.15" h x 1.53" d

NEMA 4X enclosures have sunshades on the front tomoderate internal high temperatures, prolonging electronics and battery life.

Antennas

M110 and M800 RTUs come standard with a dual band,3db gain, omni-directional, pole mount, weatherproofantenna. They come with 11' of antenna cable and analuminum antenna mounting bracket.

Many antenna accessories are available. See theAccessories brochure for more details.

Manhole Monitor RTUs come standard with an in-ground,water-tight antenna.

ENVIRONMENTALOperating Temperature: -20F to +140F

COMMUNICATIONSMission provides wireless communications through the data transmission services of several cellularproviders in the US. Mission employs redundant, private,firewalled gateways through the cellular system toredundant servers. M110 and M800 make continuousand secure socket connections through the cellular systems to our servers resulting in virtually instantaneousdata transmissions. Alarms and data are end-to-endacknowledged (from the RTU to the servers and back).

INITIAL SYSTEM SETUPRTU and software screen setup is done through Mission’sweb-based software. Mission makes it very simple forcustomers to bring a new unit online. Simply fill out aone-page setup form, e-mail or fax it to us and we’llcomplete the setup for you. Advanced setup optionsare available. As always, everything is included in theflat Annual Service Fee.

ALARM AND SYSTEM MESSAGESMission’s alarm system offers flexibility and versatility.You can have one callout group during the week andanother on nights and weekends. Different categoriesof alarms can notify different alarm callout groups.Simultaneously have the on-call person get a call ontheir cell and their pager while also emailing the bossand sending a fax to the plant. For every alarm, you alsoget a full log of every call, page, email and fax withwhat happened in each notification attempt; we evenrecord each alarm phone call. Customers can listen tothe alarm call on any web-enabled device with speakers.

OPERATOR INTERFACEMission’s SCADA screens and reports are deliveredsecurely via the web. Screens and data exchanges useSSL (Secure Socket Layer) security. The screens havepoint and click simplicity. The main screen is a map ofthe customers’ service area with their sites. The map is animated to indicate when pumps are running (M800).Click on a site icon and the most current information forthe site is displayed in a small “popup” box. Site iconschange color to indicated alarms, service mode, disabledalarms and more. Reports and graphs have “fly over”data point value display and many have zoom and printfunctions.

WARRANTYOne year parts warranty; FOB Atlanta, GA. Additionally,Mission offers low, fixed RTU board and radio replace-ment costs for the life of the RTU. Refer to the ManagedSCADA document for more information on the warrantyand what is included with the annual service.

FIELD UPGRADESThe Mission RTU firmware upgrades are free with chipexchange.

C O M M U N I C A T I O N S

3060-C Business Park Dr. Norcross, GA 30071

Folder printed on FSC Certified Paper

Where Can You Use Mission Systems?

1. Complete stand alone alarm and SCADA systemTypically, small to medium size municipalities use the Mission system as a complete stand-alone alarm ormanaged SCADA system. This works especially well for lift stations, at less than half the price of customSCADA. Mix and match the M110, M800 and Manhole Monitor to meet your needs.

2. Dialer replacementA full Mission SCADA system costs less than a dialer. Mission SCADA tracks levels, pump runtimes, pumpstarts and prepares reports too. You can upgrade one dialer at a time or the whole collection system.

3. Backup to existing problem or critical sitesMission can provide end-to-end backup at problem or critical sites that should have redundant monitor-ing and alarming. This improves system reliability and effectiveness for daily operations.

4. Fill-in to existing SCADA – Hybrid or blended systemView your Mission data through our portal or send the data into your existing SCADA software via Mission’sOPC client for redundant HMIs! This will allow you to monitor low priority, hard to reach or expensive toaccess sites. It will also help you to expand your SCADA system to new sites or monitor sites that are farfrom your existing SCADA system. Some sites are complex and need custom SCADA while other sites arestraightforward and can use Mission. System savings are typically in the tens of thousands of dollars, bothup-front and over time.

5. In-sewer monitoring and alarmingMonitoring your manholes can identify problems before they escalate and ultimately lead to spills. This savesyou from regulatory problems and fines, it creates a cleaner environment and it may allow you to locate otherproblem areas throughout your system. These battery driven systems are completely under the road bed,waterproof and rugged, low maintenance and cost less than $1 per day to operate.

Add rainfall tipping buckets to get a complete rainfall monitoring system!

The Bottom LineWhen it comes to value, the pricing structure of Mission simply makes more sense. Custom SCADA providers willtell you that you only need to pay one up front fee to use their technology. What they’re leaving out is the continued onsite maintenance, repair and license fee that their systems require.

Wastewater Water• Lift Stations • Tanks• Manhole Sites • Wells• Pump Stations • Booster Stations• Ponds • Flow Meters

• PRV Stations• Streams, Ponds, Reservoirs, etc.

Monitoring and Reporting:• Real-time Alarms, Pumps Starts and Runtimes, Level, Flow, Current, Pressure,

Chlorine, Turbidity and more

Remote Control:• Tanks and Wells, Valves, Standby Equipment, Chemical Dosers and more• Automatic or Manual

How Can You Use Mission Systems?

Gain on-the-goaccess to yourSCADA systemwith the user-friendly mobilewebsite.

Electronic keystrack site visits.

Mission offers manygraphing and reportoptions.

Advanced Monitoring • Low Cost • Managed SCADA

Single Point of Responsibility • Up and Running In a Few Hours • Simple – No Programming

How Mission Is Fundamentally DifferentMission makes it easier than ever to operate your water or wastewater system by offering the most importantSCADA hardware and software features pre-packaged into a turnkey setup. We call it managed SCADA. It’shassle-free and there’s no programming. The whole system can be up and running in a few hours. Andbecause the system is web-based, upgrades and enhancements are available in real-time, all the time. Whatdoes this mean for you? It means you won’t get blindsided by maintenance and license fees year after year.It means you get the latest and greatest now – not later. Our focus has been on the water/wastewater industrysince we began over a decade ago. All reports, graphs and data are tailored to your needs. Mission’s “no-hassle”SCADA means you can spend more time doing what you do best – using data intuitively to make your utility’swater or wastewater system better than ever. But don't take our word for it - ask any of our customersthroughout the U.S. and Canada.

Here’s How We Deliver Value for You• Expandable field RTUs come with the features operators want built in

• Operates on the data side of most cellular networks (4G, 3G, and 2G) for enhanced reliability

• Sophisticated alarm scheduling features deliver unparalleled flexibility

• Access your data on the Mission web-based HMI optimized for computers, smartphones and tablets

• Send data to your existing SCADA software using industry standard OPC protocols

• No radio path studies, no unsightly antenna towers, no network maintenance

• No investment or maintenance of back end hardware or software of those systems

• Predictable cost of ownership with technology obsolescence and price stability guarantees

• Highly technical, customer-driven support staff, free webinars and training resources

Mission CentralizedHardware and SoftwareServer Centers

Alarms and Data to:• Phones • Pagers • Fax • Email • Tablets • Your HMI

SecureEncryptedAccessThroughthe Internet

Reports

Multiple LocalCell Towers

Field RTUs1

2 3 4

5

6

Standardized, purpose built RTUscost less to buy, install and operate.Our RTUs require no programming and aresimple enough to install yourself. This resultsin minimized installation and training costs.

National wireless networks are reliable and readywhen you are.Mission has direct relationships with major cellular companies.This uniquely allows us to have redundant, private gateways (signalpaths) through the data side of the cellular system. These redundancyand data protocols are part of what allows Mission to deliver end-to-end uptime reliability even better than traditional phonelines or private radio. We purchase data in “bulk” and pass the savings on to you.

A Managed SCADA System Built for You, Without the Complexities of Customization.

Model 110• Real-time alarms• Hourly updates• Continuous and secure

RTU connection• Manual remote control(NEMA 4X Enclosure Option)

Model 800• Real-time alarms and streaming

analog data for trending• Continuous and secure RTU

connection• Automated remote control

(Flatpak Enclosure Option)

Manhole Monitor• In-sewer, real-time CSO/SSO alarm system• Rugged, solid metal, waterproof enclosure• LCD simplifies startup• 5+ year battery• In-road antenna

1

2Eliminate paper logs with electronic keysthat track site visits. The electronic key readeris included with M110 and M800 RTUs.

s

A log of every attempt to send you an alarm and its outcome elimi-nates wondering about what happened in an alarm callout.

3

5

6

4

Security and redundancy built and designed for you- managed by us.We manage it - so you don't have to. Mission hosts and managesredundant server banks housing our software and databases. Thisallows us to stay in control of performance standards and featureupgrades to deliver unsurpassed performance and reliability.

High Level AlarmMission recordsevery alarm.Listen to alarmphone calls fromany computer.

An alarm system with functionality and versatility.Alarms are delivered by any combination of voice call, textmessage, email, fax and page. Our diagnostic alert systemcatches problems and notifies you before they escalate. Thishelps you reduce power usage, pump wear and overtime. Thesystem's flexibility allows you to create simple or elaborate callout schedules.

Simple and secure access to your infor-mation anywhere—even in the field.The data from your RTUs can be accessed fromdesktop computers, smartphones and tablets.Now you can get to your system and data anytimeand anywhere, securely through the web.

Intuitive reports and graphs helpyou maintain and optimizeyour system.Whether you need to compare pumpstation flow with local rainfall to studyinflow/infiltration, reduce wear andtear on your pumps by analyzing pumpruntimes for anomalies, track siteaccess for maintenance records orrecord chlorine residual for compliancereporting, Mission's reporting andgraphing features have it covered.

Single Point of Responsibility • Up and Running In a Few Hours • Simple – No Programming

How Mission Is Fundamentally DifferentMission makes it easier than ever to operate your water or wastewater system by offering the most importantSCADA hardware and software features pre-packaged into a turnkey setup. We call it managed SCADA. It’shassle-free and there’s no programming. The whole system can be up and running in a few hours. Andbecause the system is web-based, upgrades and enhancements are available in real-time, all the time. Whatdoes this mean for you? It means you won’t get blindsided by maintenance and license fees year after year.It means you get the latest and greatest now – not later. Our focus has been on the water/wastewater industrysince we began over a decade ago. All reports, graphs and data are tailored to your needs. Mission’s “no-hassle”SCADA means you can spend more time doing what you do best – using data intuitively to make your utility’swater or wastewater system better than ever. But don't take our word for it - ask any of our customersthroughout the U.S. and Canada.

Here’s How We Deliver Value for You• Expandable field RTUs come with the features operators want built in

• Operates on the data side of most cellular networks (4G, 3G, and 2G) for enhanced reliability

• Sophisticated alarm scheduling features deliver unparalleled flexibility

• Access your data on the Mission web-based HMI optimized for computers, smartphones and tablets

• Send data to your existing SCADA software using industry standard OPC protocols

• No radio path studies, no unsightly antenna towers, no network maintenance

• No investment or maintenance of back end hardware or software of those systems

• Predictable cost of ownership with technology obsolescence and price stability guarantees

• Highly technical, customer-driven support staff, free webinars and training resources

Mission CentralizedHardware and SoftwareServer Centers

Alarms and Data to:• Phones • Pagers • Fax • Email • Tablets • Your HMI

SecureEncryptedAccessThroughthe Internet

Reports

Multiple LocalCell Towers

Field RTUs1

2 3 4

5

6

Standardized, purpose built RTUscost less to buy, install and operate.Our RTUs require no programming and aresimple enough to install yourself. This resultsin minimized installation and training costs.

National wireless networks are reliable and readywhen you are.Mission has direct relationships with major cellular companies.This uniquely allows us to have redundant, private gateways (signalpaths) through the data side of the cellular system. These redundancyand data protocols are part of what allows Mission to deliver end-to-end uptime reliability even better than traditional phonelines or private radio. We purchase data in “bulk” and pass the savings on to you.

A Managed SCADA System Built for You, Without the Complexities of Customization.

Model 110• Real-time alarms• Hourly updates• Continuous and secure

RTU connection• Manual remote control(NEMA 4X Enclosure Option)

Model 800• Real-time alarms and streaming

analog data for trending• Continuous and secure RTU

connection• Automated remote control

(Flatpak Enclosure Option)

Manhole Monitor• In-sewer, real-time CSO/SSO alarm system• Rugged, solid metal, waterproof enclosure• LCD simplifies startup• 5+ year battery• In-road antenna

1

2Eliminate paper logs with electronic keysthat track site visits. The electronic key readeris included with M110 and M800 RTUs.

s

A log of every attempt to send you an alarm and its outcome elimi-nates wondering about what happened in an alarm callout.

3

5

6

4

Security and redundancy built and designed for you- managed by us.We manage it - so you don't have to. Mission hosts and managesredundant server banks housing our software and databases. Thisallows us to stay in control of performance standards and featureupgrades to deliver unsurpassed performance and reliability.

High Level AlarmMission recordsevery alarm.Listen to alarmphone calls fromany computer.

An alarm system with functionality and versatility.Alarms are delivered by any combination of voice call, textmessage, email, fax and page. Our diagnostic alert systemcatches problems and notifies you before they escalate. Thishelps you reduce power usage, pump wear and overtime. Thesystem's flexibility allows you to create simple or elaborate callout schedules.

Simple and secure access to your infor-mation anywhere—even in the field.The data from your RTUs can be accessed fromdesktop computers, smartphones and tablets.Now you can get to your system and data anytimeand anywhere, securely through the web.

Intuitive reports and graphs helpyou maintain and optimizeyour system.Whether you need to compare pumpstation flow with local rainfall to studyinflow/infiltration, reduce wear andtear on your pumps by analyzing pumpruntimes for anomalies, track siteaccess for maintenance records orrecord chlorine residual for compliancereporting, Mission's reporting andgraphing features have it covered.

Single Point of Responsibility • Up and Running In a Few Hours • Simple – No Programming

How Mission Is Fundamentally DifferentMission makes it easier than ever to operate your water or wastewater system by offering the most importantSCADA hardware and software features pre-packaged into a turnkey setup. We call it managed SCADA. It’shassle-free and there’s no programming. The whole system can be up and running in a few hours. Andbecause the system is web-based, upgrades and enhancements are available in real-time, all the time. Whatdoes this mean for you? It means you won’t get blindsided by maintenance and license fees year after year.It means you get the latest and greatest now – not later. Our focus has been on the water/wastewater industrysince we began over a decade ago. All reports, graphs and data are tailored to your needs. Mission’s “no-hassle”SCADA means you can spend more time doing what you do best – using data intuitively to make your utility’swater or wastewater system better than ever. But don't take our word for it - ask any of our customersthroughout the U.S. and Canada.

Here’s How We Deliver Value for You• Expandable field RTUs come with the features operators want built in

• Operates on the data side of most cellular networks (4G, 3G, and 2G) for enhanced reliability

• Sophisticated alarm scheduling features deliver unparalleled flexibility

• Access your data on the Mission web-based HMI optimized for computers, smartphones and tablets

• Send data to your existing SCADA software using industry standard OPC protocols

• No radio path studies, no unsightly antenna towers, no network maintenance

• No investment or maintenance of back end hardware or software of those systems

• Predictable cost of ownership with technology obsolescence and price stability guarantees

• Highly technical, customer-driven support staff, free webinars and training resources

Mission CentralizedHardware and SoftwareServer Centers

Alarms and Data to:• Phones • Pagers • Fax • Email • Tablets • Your HMI

SecureEncryptedAccessThroughthe Internet

Reports

Multiple LocalCell Towers

Field RTUs1

2 3 4

5

6

Standardized, purpose built RTUscost less to buy, install and operate.Our RTUs require no programming and aresimple enough to install yourself. This resultsin minimized installation and training costs.

National wireless networks are reliable and readywhen you are.Mission has direct relationships with major cellular companies.This uniquely allows us to have redundant, private gateways (signalpaths) through the data side of the cellular system. These redundancyand data protocols are part of what allows Mission to deliver end-to-end uptime reliability even better than traditional phonelines or private radio. We purchase data in “bulk” and pass the savings on to you.

A Managed SCADA System Built for You, Without the Complexities of Customization.

Model 110• Real-time alarms• Hourly updates• Continuous and secure

RTU connection• Manual remote control(NEMA 4X Enclosure Option)

Model 800• Real-time alarms and streaming

analog data for trending• Continuous and secure RTU

connection• Automated remote control

(Flatpak Enclosure Option)

Manhole Monitor• In-sewer, real-time CSO/SSO alarm system• Rugged, solid metal, waterproof enclosure• LCD simplifies startup• 5+ year battery• In-road antenna

1

2Eliminate paper logs with electronic keysthat track site visits. The electronic key readeris included with M110 and M800 RTUs.

s

A log of every attempt to send you an alarm and its outcome elimi-nates wondering about what happened in an alarm callout.

3

5

6

4

Security and redundancy built and designed for you- managed by us.We manage it - so you don't have to. Mission hosts and managesredundant server banks housing our software and databases. Thisallows us to stay in control of performance standards and featureupgrades to deliver unsurpassed performance and reliability.

High Level AlarmMission recordsevery alarm.Listen to alarmphone calls fromany computer.

An alarm system with functionality and versatility.Alarms are delivered by any combination of voice call, textmessage, email, fax and page. Our diagnostic alert systemcatches problems and notifies you before they escalate. Thishelps you reduce power usage, pump wear and overtime. Thesystem's flexibility allows you to create simple or elaborate callout schedules.

Simple and secure access to your infor-mation anywhere—even in the field.The data from your RTUs can be accessed fromdesktop computers, smartphones and tablets.Now you can get to your system and data anytimeand anywhere, securely through the web.

Intuitive reports and graphs helpyou maintain and optimizeyour system.Whether you need to compare pumpstation flow with local rainfall to studyinflow/infiltration, reduce wear andtear on your pumps by analyzing pumpruntimes for anomalies, track siteaccess for maintenance records orrecord chlorine residual for compliancereporting, Mission's reporting andgraphing features have it covered.

Why Mission?Experience. Reliability. Vision.

Mission’s management had an

integral role in developing data

cellular transport technologies with

Bell South in 1996. In late 1999, we

used that experience to create

Mission. We were the first to bring

the technology to the water/waste-

water industry; first to transport

data on the digital cellular system;

first to stream data continuously on

it and first to offer service on major

cellular systems. In all these areas,

Mission was the first and is still the

best. Nobody has near the experience,

volume of field units, or numbers of

satisfied customers.

When it’s critical, trust Mission.

So why don’t you get started

today? Our SCADA experts are waiting

to hear from you. Contact a Missionrepresentative at 1-877-993-1911 to

learn how we can deploy the right

solution to fit your needs, at a fraction

of the cost of building a customized

SCADA platform. Discover more

about the Mission approach

yourself by visiting our web site:

www.123mc.com.

©2013 Mission Communications. The Mission Communicationslogo is property of Mission Communications.

No part of this publication may be reproduced or transmitted bymeans of photocopying, scanning, or printing, without the priorwritten permission of Mission Communications.

Literature Code: #PB1- 0914

SPECIFICATIONSMODELSRemote Terminal Units (RTUs)

Manhole Monitor in-sewer overflow tracking and alarmsystem, 5+ year battery-powered and waterproof.

M110 real-time alarm system with hourly check-ins thatinclude pump reports, analog values and more.

M800 real-time alarm system with streaming data foranalog trending, real-time pump starts, optional automaticremote control and more.

Enclosures

Manhole Monitor self-contained, solid metal enclosureis IP68 rated for watertightness NEMA 1 aluminum indoor enclosure with battery insideNEMA 1 FlatPak in panel enclosure with battery outsideNEMA 4X water resistant, fiberglass outdoor enclosure

ELECTRICALDigital Inputs: 8 dry contact inputs on M110 and M800series support alarms, status, or accumulating pumpsruntimes/starts. The M110 and M800 can be expandedto 16 digital inputs. The Manhole Monitor in-sewer RTUhas 2 digital inputs that are typically used with floats tosense surcharge and high sewer level.

Built-in Inputs: The M110 and M800 RTUs have 4 built-ininputs: temperature, signal strength, battery voltage andA/C voltage. This status information is transmitted hourly.

Key Reader Input: The key reader, included with M110and M800 RTUs, allow on-site personnel to log a sitevisit and suspend alarms while service is performed atthe station. Management can track the key entries forproductivity and regulatory reporting purposes.

Analog Inputs: M110 and M800 RTUs come with 2 analoginputs to report pressure, level or any 4-20mA or 0-5Vinput from a transducer. The inputs can be expanded to 6 with the analog expansion board. Analog inputssupport 4 threshold alarms settings that can be remotelyconfigured.

Pulse Inputs (optional): 2 pulse inputs can be used toreport data such as flow, water meter or rainfall totals.If no rainfall data is monitored at the site, Mission’s website presents data from the closest National WeatherService reporting station.

Input Wiring Supervision: M110 and M800 RTU digitalinput wires use End-Of-Line resistors for wiring super-vision similar to fire alarm panels. Wiring supervisiondetects if wires break or become disconnected and thusunable to respond to alarm conditions.

Digital Outputs:The M110 and M800 series support 3relay outputs that can be remotely controlled. These areused for many purposes including turning on an emer-gency pump or security light. Multiple M800s can belinked so an event at one station causes a relay change atanother. Mission’s Tank and Well Control package relieson this feature.

Wet Well Module:The Model 110 and 800 have a quickconnect for the optional wet well module. This deviceconveniently packages 2 strap-on current sensors fortrue pump run information with a patented high levelfloat circuit that “T” taps into the existing high float.This greatly reduces installation time and provides for abattery backed up high float alarm. Now you can gethigh-level alarms even when there is no A/C power.

Power and Backup Power: The M110 and M800 RTUsoperate safely on 12V via the supplied UL recognizedtransformer.They include a 5 amp hour battery with acharging circuit that powers the units for 24-72 hoursduring a power failure.There is an automatic alarm forexternal power failure and low battery conditions. Theincluded 120VAC to 12VAC transformer mounts sepa-rate from the RTU to protect the main board and radiofrom voltage spikes. A solar panel option is available forremote locations. The Manhole Monitor unit includes asealed 5+ year life battery so no external power sourceis required.

(877) 993-1911sales@123mc.com

www.123mc.com

PHYSICALEnclosures

NEMA 1 Regular: 11" w x 11" h x 3.5" d

NEMA 1 FlatPak: 7.75" w x 10.5" h x 1.5" d

NEMA 4X: 13.25" w x 13.75" h x 5.5" d

Manhole Monitor: 9.01" w x 5.15" h x 1.53" d

NEMA 4X enclosures have sunshades on the front tomoderate internal high temperatures, prolonging electronics and battery life.

Antennas

M110 and M800 RTUs come standard with a dual band,3db gain, omni-directional, pole mount, weatherproofantenna. They come with 11' of antenna cable and analuminum antenna mounting bracket.

Many antenna accessories are available. See theAccessories brochure for more details.

Manhole Monitor RTUs come standard with an in-ground,water-tight antenna.

ENVIRONMENTALOperating Temperature: -20F to +140F

COMMUNICATIONSMission provides wireless communications through the data transmission services of several cellularproviders in the US. Mission employs redundant, private,firewalled gateways through the cellular system toredundant servers. M110 and M800 make continuousand secure socket connections through the cellular systems to our servers resulting in virtually instantaneousdata transmissions. Alarms and data are end-to-endacknowledged (from the RTU to the servers and back).

INITIAL SYSTEM SETUPRTU and software screen setup is done through Mission’sweb-based software. Mission makes it very simple forcustomers to bring a new unit online. Simply fill out aone-page setup form, e-mail or fax it to us and we’llcomplete the setup for you. Advanced setup optionsare available. As always, everything is included in theflat Annual Service Fee.

ALARM AND SYSTEM MESSAGESMission’s alarm system offers flexibility and versatility.You can have one callout group during the week andanother on nights and weekends. Different categoriesof alarms can notify different alarm callout groups.Simultaneously have the on-call person get a call ontheir cell and their pager while also emailing the bossand sending a fax to the plant. For every alarm, you alsoget a full log of every call, page, email and fax withwhat happened in each notification attempt; we evenrecord each alarm phone call. Customers can listen tothe alarm call on any web-enabled device with speakers.

OPERATOR INTERFACEMission’s SCADA screens and reports are deliveredsecurely via the web. Screens and data exchanges useSSL (Secure Socket Layer) security. The screens havepoint and click simplicity. The main screen is a map ofthe customers’ service area with their sites. The map is animated to indicate when pumps are running (M800).Click on a site icon and the most current information forthe site is displayed in a small “popup” box. Site iconschange color to indicated alarms, service mode, disabledalarms and more. Reports and graphs have “fly over”data point value display and many have zoom and printfunctions.

WARRANTYOne year parts warranty; FOB Atlanta, GA. Additionally,Mission offers low, fixed RTU board and radio replace-ment costs for the life of the RTU. Refer to the ManagedSCADA document for more information on the warrantyand what is included with the annual service.

FIELD UPGRADESThe Mission RTU firmware upgrades are free with chipexchange.

C O M M U N I C A T I O N S

3060-C Business Park Dr. Norcross, GA 30071

Folder printed on FSC Certified Paper

Where Can You Use Mission Systems?

1. Complete stand alone alarm and SCADA systemTypically, small to medium size municipalities use the Mission system as a complete stand-alone alarm ormanaged SCADA system. This works especially well for lift stations, at less than half the price of customSCADA. Mix and match the M110, M800 and Manhole Monitor to meet your needs.

2. Dialer replacementA full Mission SCADA system costs less than a dialer. Mission SCADA tracks levels, pump runtimes, pumpstarts and prepares reports too. You can upgrade one dialer at a time or the whole collection system.

3. Backup to existing problem or critical sitesMission can provide end-to-end backup at problem or critical sites that should have redundant monitor-ing and alarming. This improves system reliability and effectiveness for daily operations.

4. Fill-in to existing SCADA – Hybrid or blended systemView your Mission data through our portal or send the data into your existing SCADA software via Mission’sOPC client for redundant HMIs! This will allow you to monitor low priority, hard to reach or expensive toaccess sites. It will also help you to expand your SCADA system to new sites or monitor sites that are farfrom your existing SCADA system. Some sites are complex and need custom SCADA while other sites arestraightforward and can use Mission. System savings are typically in the tens of thousands of dollars, bothup-front and over time.

5. In-sewer monitoring and alarmingMonitoring your manholes can identify problems before they escalate and ultimately lead to spills. This savesyou from regulatory problems and fines, it creates a cleaner environment and it may allow you to locate otherproblem areas throughout your system. These battery driven systems are completely under the road bed,waterproof and rugged, low maintenance and cost less than $1 per day to operate.

Add rainfall tipping buckets to get a complete rainfall monitoring system!

The Bottom LineWhen it comes to value, the pricing structure of Mission simply makes more sense. Custom SCADA providers willtell you that you only need to pay one up front fee to use their technology. What they’re leaving out is the continued onsite maintenance, repair and license fee that their systems require.

Wastewater Water• Lift Stations • Tanks• Manhole Sites • Wells• Pump Stations • Booster Stations• Ponds • Flow Meters

• PRV Stations• Streams, Ponds, Reservoirs, etc.

Monitoring and Reporting:• Real-time Alarms, Pumps Starts and Runtimes, Level, Flow, Current, Pressure,

Chlorine, Turbidity and more

Remote Control:• Tanks and Wells, Valves, Standby Equipment, Chemical Dosers and more• Automatic or Manual

How Can You Use Mission Systems?

Gain on-the-goaccess to yourSCADA systemwith the user-friendly mobilewebsite.

Electronic keystrack site visits.

Mission offers manygraphing and reportoptions.

Advanced Monitoring • Low Cost • Managed SCADA

Why Mission?Experience. Reliability. Vision.

Mission’s management had an

integral role in developing data

cellular transport technologies with

Bell South in 1996. In late 1999, we

used that experience to create

Mission. We were the first to bring

the technology to the water/waste-

water industry; first to transport

data on the digital cellular system;

first to stream data continuously on

it and first to offer service on major

cellular systems. In all these areas,

Mission was the first and is still the

best. Nobody has near the experience,

volume of field units, or numbers of

satisfied customers.

When it’s critical, trust Mission.

So why don’t you get started

today? Our SCADA experts are waiting

to hear from you. Contact a Missionrepresentative at 1-877-993-1911 tolearn how we can deploy the right

solution to fit your needs, at a fraction

of the cost of building a customized

SCADA platform. Discover more

about the Mission approach

yourself by visiting our web site:

www.123mc.com.

©2014 Mission Communications. The Mission Communicationslogo is property of Mission Communications.

No part of this publication may be reproduced or transmitted bymeans of photocopying, scanning, or printing, without the priorwritten permission of Mission Communications.

Literature Code: #PB1- 0914

SPECIFICATIONSMODELSRemote Terminal Units (RTUs)

Manhole Monitor in-sewer overflow tracking and alarmsystem, 5+ year battery-powered and waterproof.

M110 real-time alarm system with hourly check-ins thatinclude pump reports, analog values and more.

M800 real-time alarm system with streaming data foranalog trending, real-time pump starts, optional automaticremote control and more.

Enclosures

Manhole Monitor self-contained, solid metal enclosureis IP68 rated for watertightness NEMA 1 aluminum indoor enclosure with battery insideNEMA 1 FlatPak in panel enclosure with battery outsideNEMA 4X water resistant, fiberglass outdoor enclosure

ELECTRICALDigital Inputs: 8 dry contact inputs on M110 and M800series support alarms, status, or accumulating pumpsruntimes/starts. The M110 and M800 can be expandedto 16 digital inputs. The Manhole Monitor in-sewer RTUhas 2 digital inputs that are typically used with floats tosense surcharge and high sewer level.

Built-in Inputs: The M110 and M800 RTUs have 4 built-ininputs: temperature, signal strength, battery voltage andA/C voltage. This status information is transmitted hourly.

Key Reader Input: The key reader, included with M110and M800 RTUs, allow on-site personnel to log a sitevisit and suspend alarms while service is performed atthe station. Management can track the key entries forproductivity and regulatory reporting purposes.

Analog Inputs: M110 and M800 RTUs come with 2 analoginputs to report pressure, level or any 4-20mA or 0-5Vinput from a transducer. The inputs can be expanded to 6 with the analog expansion board. Analog inputssupport 4 threshold alarms settings that can be remotelyconfigured.

Pulse Inputs (optional): 2 pulse inputs can be used toreport data such as flow, water meter or rainfall totals.If no rainfall data is monitored at the site, Mission’s website presents data from the closest National WeatherService reporting station.

Input Wiring Supervision: M110 and M800 RTU digitalinput wires use End-Of-Line resistors for wiring super-vision similar to fire alarm panels. Wiring supervisiondetects if wires break or become disconnected and thusunable to respond to alarm conditions.

Digital Outputs:The M110 and M800 series support 3relay outputs that can be remotely controlled. These areused for many purposes including turning on an emer-gency pump or security light. Multiple M800s can belinked so an event at one station causes a relay change atanother. Mission’s Tank and Well Control package relieson this feature.

Wet Well Module:The Model 110 and 800 have a quickconnect for the optional wet well module. This deviceconveniently packages 2 strap-on current sensors fortrue pump run information with a patented high levelfloat circuit that “T” taps into the existing high float.This greatly reduces installation time and provides for abattery backed up high float alarm. Now you can gethigh-level alarms even when there is no A/C power.

Power and Backup Power: The M110 and M800 RTUsoperate safely on 12V via the supplied UL recognizedtransformer.They include a 5 amp hour battery with acharging circuit that powers the units for 24-72 hoursduring a power failure.There is an automatic alarm forexternal power failure and low battery conditions. Theincluded 120VAC to 12VAC transformer mounts sepa-rate from the RTU to protect the main board and radiofrom voltage spikes. A solar panel option is available forremote locations. The Manhole Monitor unit includes asealed 5+ year life battery so no external power sourceis required.

(877) 993-1911sales@123mc.com

www.123mc.com

PHYSICALEnclosures

NEMA 1 Regular: 11" w x 11" h x 3.5" d

NEMA 1 FlatPak: 7.75" w x 10.5" h x 1.5" d

NEMA 4X: 13.25" w x 13.75" h x 5.5" d

Manhole Monitor: 9.01" w x 5.15" h x 1.53" d

NEMA 4X enclosures have sunshades on the front tomoderate internal high temperatures, prolonging electronics and battery life.

Antennas

M110 and M800 RTUs come standard with a dual band,3db gain, omni-directional, pole mount, weatherproofantenna. They come with 11' of antenna cable and analuminum antenna mounting bracket.

Many antenna accessories are available. See theAccessories brochure for more details.

Manhole Monitor RTUs come standard with an in-ground,water-tight antenna.

ENVIRONMENTALOperating Temperature: -20F to +140F

COMMUNICATIONSMission provides wireless communications through the data transmission services of several cellularproviders in the US. Mission employs redundant, private,firewalled gateways through the cellular system toredundant servers. M110 and M800 make continuousand secure socket connections through the cellular systems to our servers resulting in virtually instantaneousdata transmissions. Alarms and data are end-to-endacknowledged (from the RTU to the servers and back).

INITIAL SYSTEM SETUPRTU and software screen setup is done through Mission’sweb-based software. Mission makes it very simple forcustomers to bring a new unit online. Simply fill out aone-page setup form, e-mail or fax it to us and we’llcomplete the setup for you. Advanced setup optionsare available. As always, everything is included in theflat Annual Service Fee.

ALARM AND SYSTEM MESSAGESMission’s alarm system offers flexibility and versatility.You can have one callout group during the week andanother on nights and weekends. Different categoriesof alarms can notify different alarm callout groups.Simultaneously have the on-call person get a call ontheir cell and their pager while also emailing the bossand sending a fax to the plant. For every alarm, you alsoget a full log of every call, page, email and fax withwhat happened in each notification attempt; we evenrecord each alarm phone call. Customers can listen tothe alarm call on any web-enabled device with speakers.

OPERATOR INTERFACEMission’s SCADA screens and reports are deliveredsecurely via the web. Screens and data exchanges useSSL (Secure Socket Layer) security. The screens havepoint and click simplicity. The main screen is a map ofthe customers’ service area with their sites. The map is animated to indicate when pumps are running (M800).Click on a site icon and the most current information forthe site is displayed in a small “popup” box. Site iconschange color to indicated alarms, service mode, disabledalarms and more. Reports and graphs have “fly over”data point value display and many have zoom and printfunctions.

WARRANTYOne year parts warranty; FOB Atlanta, GA. Additionally,Mission offers low, fixed RTU board and radio replace-ment costs for the life of the RTU. Refer to the ManagedSCADA document for more information on the warrantyand what is included with the annual service.

FIELD UPGRADESThe Mission RTU firmware upgrades are free with chipexchange.

C O M M U N I C A T I O N S

3060-C Business Park Dr. Norcross, GA 30071

Folder printed on FSC Certified Paper

Where Can You Use Mission Systems?

1. Complete stand alone alarm and SCADA systemTypically, small to medium size municipalities use the Mission system as a complete stand-alone alarm ormanaged SCADA system. This works especially well for lift stations, at less than half the price of customSCADA. Mix and match the M110, M800 and Manhole Monitor to meet your needs.

2. Dialer replacementA full Mission SCADA system costs less than a dialer. Mission SCADA tracks levels, pump runtimes, pumpstarts and prepares reports too. You can upgrade one dialer at a time or the whole collection system.

3. Backup to existing problem or critical sitesMission can provide end-to-end backup at problem or critical sites that should have redundant monitor-ing and alarming. This improves system reliability and effectiveness for daily operations.

4. Fill-in to existing SCADA – Hybrid or blended systemView your Mission data through our portal or send the data into your existing SCADA software via Mission’sOPC client for redundant HMIs! This will allow you to monitor low priority, hard to reach or expensive toaccess sites. It will also help you to expand your SCADA system to new sites or monitor sites that are farfrom your existing SCADA system. Some sites are complex and need custom SCADA while other sites arestraightforward and can use Mission. System savings are typically in the tens of thousands of dollars, bothup-front and over time.

5. In-sewer monitoring and alarmingMonitoring your manholes can identify problems before they escalate and ultimately lead to spills. This savesyou from regulatory problems and fines, it creates a cleaner environment and it may allow you to locate otherproblem areas throughout your system. These battery driven systems are completely under the road bed,waterproof and rugged, low maintenance and cost less than $1 per day to operate.

Add rainfall tipping buckets to get a complete rainfall monitoring system!

The Bottom LineWhen it comes to value, the pricing structure of Mission simply makes more sense. Custom SCADA providers willtell you that you only need to pay one up front fee to use their technology. What they’re leaving out is the continued onsite maintenance, repair and license fee that their systems require.

Wastewater Water• Lift Stations • Tanks• Manhole Sites • Wells• Pump Stations • Booster Stations• Ponds • Flow Meters

• PRV Stations• Streams, Ponds, Reservoirs, etc.

Monitoring and Reporting:• Real-time Alarms, Pumps Starts and Runtimes, Level, Flow, Current, Pressure,Chlorine, Turbidity and more

Remote Control:• Tanks and Wells, Valves, Standby Equipment, Chemical Dosers and more• Automatic or Manual

How Can You Use Mission Systems?

Gain on-the-goaccess to yourSCADA systemwith the user-friendly mobilewebsite.

Electronic keystrack site visits.

Mission offers manygraphing and reportoptions.

Advanced Monitoring • Low Cost • Managed SCADA