1
7/21/2019 How to Collect Logs in Winrar Form http://slidepdf.com/reader/full/how-to-collect-logs-in-winrar-form 1/1 Steps to collect rmem folder on the eNodeB eCCM-root-root> cd / eCCM-root-/> ls -lrt eCCM-root-/> cp -r rmem /tmp cd /tmp tar cvfz rmem.tar.gz rmem ----zip the file change the permission write chmod 777 rmem.tar.gz then use file zilla to transfer the file MPR ISSUE Ping ok but telnet NOK troubleshooting steps 1. The problem is always at the end of the MPR conecting to the router. 2. Remove SFP and plug it again .If NOK continue the next step 3.change sfp port on MPR connecting to the router ---- that is if you are using port 5 on the MPR change it to port 6. 4. Enable the port 6 and configure the vlan before connecting the fiber 5.Use the right SFP 5.If NOK change the CORE E card on the MPR

How to Collect Logs in Winrar Form

Embed Size (px)

DESCRIPTION

how to collect logs from eccm u

Citation preview

Page 1: How to Collect Logs in Winrar Form

7/21/2019 How to Collect Logs in Winrar Form

http://slidepdf.com/reader/full/how-to-collect-logs-in-winrar-form 1/1

Steps to collect rmem folder on the eNodeB

eCCM-root-root> cd /eCCM-root-/> ls -lrt

eCCM-root-/> cp -r rmem /tmpcd /tmp

tar cvfz rmem.tar.gz rmem ----zip the file

change the permission writechmod 777 rmem.tar.gz

then use file zilla to transfer the file

MPR ISSUE

Ping ok but telnet NOK troubleshooting steps

1. The problem is always at the end of the MPR conecting to the router.

2. Remove SFP and plug it again .If NOK continue the next step

3.change sfp port on MPR connecting to the router ---- that is if you are usingport 5 on the MPR change it to port 6.

4. Enable the port 6 and configure the vlan before connecting the fiber

5.Use the right SFP

5.If NOK change the CORE E card on the MPR