How to Install BIDET4ME Electric Bidets

** Take off the existing seat

** Shut off water by turning valve

** 3. Flush the toilet

** 4. Disconnect incoming water source pipe from water inlet valve

PS: Tee Details (7/8 inch)

Tee inside with filter

Rubber Ring (Prevent Water Leaking)

Correct Tee Adapter (7/8 inch)

** 5. Connect T-valve to water inlet valve

** 6. Connect the water pipe to the T-valve

Details:

** 7. Install base plate to the SHS unit

** 8. Slide the toilet seat to connect to base plate

** 9. Connect the other pipe from t-valve to valve behind seat

PS: Blue Click

** 10. Connect the power (about 6 feet long - facing bidet it's on your right hand side)