How to Setup Outlook 2013

This guide will show step-by-step instructions for setting up email on Outlook 2013 for Windows. While it can be used for other versions of Outlook, some screens and steps might vary.

Adding a new account:

1. Select the File menu and choose Info2. Click the Add Account button.3. Choose Manual setup or additional server types

4. Click Next.5. Choose POP or IMAP .

6. Click Next.

Account Settings:

Enter your Name as you want it to appear on your outbound email messages.

Enter your email address. Enter mail.example.com as your Incoming Mail Server.

You would not enter example.com but your own domain name.

The Outgoing Mail Server is the same as your Incoming Mail Server.

Enter your email address for the User Name. Enter your email password.

More Settings

1. Click the More Settings button.

2. Click the Outgoing Server tab.

3. Click the "My outgoing server (SMTP) requires authentication" checkbox.

4. Make sure that it is using the same settings as your incoming mail server.

5. Click the Advanced tab.o If you are using POP3 with SSL, please enter 995 for your port.

Otherwise leave the port at 110.o If you are using POP3, you may choose when messages are removed

from the server.o If you are using IMAP with SSL, please enter 993 for your port.

Otherwise leave the port at 143.o If you are using SMTP with SSL, please enter 465 for your port.

Otherwise change the port to 26.6. Click the OK button.Completing the Setup

1. Click Next on the E-mail Accounts window.2. Click the Finish button.

Outlook 2013 is now correctly configured to send and receive emails.

File ->

Select Manually configure server settings or additional server types

Select Internet email

Your name : Sanu P

Email address

IMAP -

mail.gharissaicecream.com

Username = Email address shopdel@

Password

2, CLICK ON MORE SETTINGS

1. Outgoing server2. My outgoing server requires authentication3. Advanced

How to Setup Outlook 2010

Adding a new account:

1. Select the 'File' menu.2. Select Info.

3. Click the Add Account button.

4. Choose to Manually configure server settings.

5. Click Next.6. Choose Internet E-Mail.

7. Click Next.

Account Settings

1. Enter your name as you want it to appear on your outbound email messages.

2. Enter your email address.3. Enter your full email address as the User Name.4. Enter your email password.5. Your mail server is mail.YourDomain.com, eg mail.example.com.6. The Outgoing Mail Server is the same as your incoming mail server.

More Settings

1. Click the More Settings button.

2. Click the Outgoing Server tab.

3. Check the "My outgoing server (SMTP) requires authentication" checkbox.

4. Ensure you are using the same settings as your incoming mail server.

5. Click the Advanced tab.6. If you are using POP3 with SSL, click the checkbox and select 995 for

your port. Otherwise leave the port at 110.7. If you are using POP3, you may choose when messages are removed

from the server.8. If you are using IMAP with SSL, click the checkbox and select 993 for

your port. Otherwise leave the port at 143.9. If you are using SMTP with SSL, click the checkbox and select 465 for

your port. Otherwise change the port to 26.10. Click the OK button.

Testing Settings

1. While on the E-mail Accounts screen, click the Test Account Settings

button.2. This will both check your settings and send a test email to yourself to

confirm that everything is working. If you receive any errors, please check your configuration.

3. Click the Close button on the Test Account Settings window.4. Click Next on the E-mail Accounts window.5. Click the Finish button.

You should now be able to send and receive mail.

Tools -> Account -> Email Accounts