Upload
others
View
24
Download
0
Embed Size (px)
Citation preview
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
WARNING Pressing the printer icon or “quick printing” this document will print
all of the guides in this compilation.
Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle.
Print only the pages for your vehicle using the advanced options in the Print menu.
Install your DSR1 module according to the guide for your vehicle.
HOW TO USE THIS INSTALL GUIDE1
2
3
SELECT VEHICLE PRINT PAGES NEEDED
OPTIONAL ACCESSORIES
PROGRAMMED FIRMWAREADS-DSR1-FOR02
PRODUCTS REQUIREDRockford Fosgate DSR1iDatalink Maestro aFO2 Installation Harness
INSTALL GUIDEFORD EDGE
2011-2017ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION,
WITHOUT CHANGING YOUR RADIO.
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-DSR1-FOR02 maestro.idatalink.com
FORD EDGE 2011-2017
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifi er replacement solution. You are now a few simple steps away from enjoying your new car amplifi er. Before starting your installation, please ensure that your module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Vehicle Wire Reference Chart 5
ADS-DSR1-FOR02 maestro.idatalink.com
FORD EDGE 2011-2017
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS STEP 1
• Remove the factory amplifi er (refer to wire chart for amplifi er location).
• Confi gure the 2 pin connectors on the aFO2 T-harness as shown on the wiring diagram.
STEP 2• Connect the factory amplifi er harnesses to the aFO2
T-harness.
STEP 3• Connect the wires from the aFO2 T-harness to the
aftermarket amplifi er.
Note 1:
If you are running your own speaker wires from the amplifi er to the speakers, this step is not necessary.
Note 2:
The amplifi er output colors and labels on the aFO2 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, see the wiring chart.
• Plug the RCA cables in the aftermarket amplifi er.
STEP 4• Connect all the harnesses to the DSR1 module.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-DSR1-FOR02 maestro.idatalink.com
FORD EDGE 2011-2017
Automotive Data Solutions Inc. © 2017 4
1
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
LF TWEETER
RF TWEETER
CENTER CH
REAR CNTR CH
SUB 1
SUB 2
LEFT FRONT OUT 1LEFT FRONT OUT 1
RIGHT FRONT OUT 2RIGHT FRONT OUT 2
LEFT SPARE OUT 3LEFT SPARE OUT 3
RIGHT SPARE OUT 4RIGHT SPARE OUT 4
LEFT REAR OUT 5LEFT REAR OUT 5
RIGHT REAR OUT 6RIGHT REAR OUT 6
LEFT SUB OUT 7LEFT SUB OUT 7
RIGHT SUB OUT 8RIGHT SUB OUT 8
WIRING DIAGRAM
STEP 1
STEP 2STEP 3FACTORY AMPLIFIER
HARNESSES
WIRES FROMVEHICLE
WHITEWHITE
GREENGREEN
GRAYGRAY
BLUE
PURPLEPURPLE
RED RED
WHITEWHITE/BLACK
GRAYGRAY/BLACK
GREENGREEN/BLACK
PURPLE/BLACKWHITE
WHITE/BLACKGRAY
PURPLE
GRAY/BLACKRED
RED/BLACKRED
RED/BLACK
BLACKBLACK/WHITE
BLACKBLACK/WHITE
CONNECTIONS NOT REQUIRED
AMPLIFIER
N.C.
STEP 4DSR1 MODULE
RCA CABLES
aFO2 T-HARNESS
ADS-DSR1-FOR02 maestro.idatalink.com
FORD EDGE 2011-2017
Automotive Data Solutions Inc. © 2017 5
VEHICLE WIRE REFERENCE CHART
T-Harness Wires Vehicle Wires
WireTag
WireColor Speaker Wire Description Component
Position
LF SPEAKERWhite Left Front Speaker (+)
~White/Black Left Front Speaker (-)
LF TWEETERWhite Left Front Tweeter (+)
~White/Black Left Front Tweeter (-)
RF SPEAKERGray Right Front Speaker (+)
~Gray/Black Right Front Speaker (-)
RF TWEETERGray Right Front Tweeter (+)
~Gray/Black Right Front Tweeter (-)
LR SPEAKERGreen Left Rear Speaker (+)
~Green/Black Left Rear Speaker (-)
RR SPEAKERPurple Right Rear Speaker (+)
~Purple/Black Right Rear Speaker (-)
REAR CNTR CH Red Rear Tweeter (+)
~Red/Black Rear Tweeter (-)
CENTER CH Orange Center Channel (+)
~Orange/Black Center Channel (-)
SUB 1Black Left Rear Subwoofer (+)
~Black/White Left Rear Subwoofer (-)
SUB 2Black Right Rear Subwoofer (+)
~Black/White Right Rear Subwoofer (-)
Amplifi er location
(2011-2014): Right C-pillar(2015-2017): Behind left quarter panel
Note: The amplifi er output colors and labels on the AR-FO2 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, follow this wiring chart.
OPTIONAL ACCESSORIES
PROGRAMMED FIRMWAREADS-DSR1-FOR02
PRODUCTS REQUIREDRockford Fosgate DSR1iDatalink Maestro aFO2 Installation Harness
INSTALL GUIDEFORD ESCAPE
2013-2016ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION,
WITHOUT CHANGING YOUR RADIO.
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-DSR1-FOR02 maestro.idatalink.com
FORD ESCAPE 2013-2016
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifi er replacement solution. You are now a few simple steps away from enjoying your new car amplifi er. Before starting your installation, please ensure that your module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Vehicle Wire Reference Chart 5
ADS-DSR1-FOR02 maestro.idatalink.com
FORD ESCAPE 2013-2016
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS STEP 1
• Remove the factory amplifi er (refer to wire chart for amplifi er location).
• Confi gure the 2 pin connectors on the aFO2 T-harness as shown on the wiring diagram.
STEP 2• Connect the factory amplifi er harnesses to the aFO2
T-harness.
STEP 3• Connect the wires from the aFO2 T-harness to the
aftermarket amplifi er.
Note 1:
If you are running your own speaker wires from the amplifi er to the speakers, this step is not necessary.
Note 2:
The amplifi er output colors and labels on the aFO2 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, see the wiring chart.
• Plug the RCA cables in the aftermarket amplifi er.
STEP 4• Connect all the harnesses to the DSR1 module.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-DSR1-FOR02 maestro.idatalink.com
FORD ESCAPE 2013-2016
Automotive Data Solutions Inc. © 2017 4
1
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
LF TWEETER
RF TWEETER
CENTER CH
REAR CNTR CH
SUB 1
SUB 2
LEFT FRONT OUT 1LEFT FRONT OUT 1
RIGHT FRONT OUT 2RIGHT FRONT OUT 2
LEFT SPARE OUT 3LEFT SPARE OUT 3
RIGHT SPARE OUT 4RIGHT SPARE OUT 4
LEFT REAR OUT 5LEFT REAR OUT 5
RIGHT REAR OUT 6RIGHT REAR OUT 6
LEFT SUB OUT 7LEFT SUB OUT 7
RIGHT SUB OUT 8RIGHT SUB OUT 8
WIRING DIAGRAM
STEP 1
STEP 2STEP 3FACTORY AMPLIFIER
HARNESSES
WIRES FROMVEHICLE
WHITEWHITE
GREENGREEN
GRAYGRAY
BLUE
PURPLEPURPLE
RED RED
WHITEWHITE/BLACK
GRAYGRAY/BLACK
GREENGREEN/BLACK
PURPLE/BLACKWHITE
WHITE/BLACKGRAY
PURPLE
GRAY/BLACKRED
RED/BLACKRED
RED/BLACK
BLACKBLACK/WHITE
BLACKBLACK/WHITE
CONNECTIONS NOT REQUIRED
AMPLIFIER
N.C.
STEP 4DSR1 MODULE
RCA CABLES
aFO2 T-HARNESS
ADS-DSR1-FOR02 maestro.idatalink.com
FORD ESCAPE 2013-2016
Automotive Data Solutions Inc. © 2017 5
VEHICLE WIRE REFERENCE CHART
T-Harness Wires Vehicle Wires
WireTag
WireColor Speaker Wire Description Component
Position
LF SPEAKERWhite Left Front Speaker (+)
~White/Black Left Front Speaker (-)
LF TWEETERWhite Left Front Tweeter (+)
~White/Black Left Front Tweeter (-)
RF SPEAKERGray Right Front Speaker (+)
~Gray/Black Right Front Speaker (-)
RF TWEETERGray Right Front Tweeter (+)
~Gray/Black Right Front Tweeter (-)
LR SPEAKERGreen Left Rear Speaker (+)
~Green/Black Left Rear Speaker (-)
RR SPEAKERPurple Right Rear Speaker (+)
~Purple/Black Right Rear Speaker (-)
REAR CNTR CH Red n/a
~Red/Black n/a
CENTER CH Orange Center Channel (+)
~Orange/Black Center Channel (-)
SUB 1Black Left Rear Subwoofer (+)
~Black/White Left Rear Subwoofer (-)
SUB 2Black Right Rear Subwoofer (+)
~Black/White Right Rear Subwoofer (-)
Amplifi er location
Left front of luggage compartment
Note: The amplifi er output colors and labels on the AR-FO2 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, follow this wiring chart.
OPTIONAL ACCESSORIES
PROGRAMMED FIRMWAREADS-DSR1-FOR02
PRODUCTS REQUIREDRockford Fosgate DSR1iDatalink Maestro aFO2 Installation Harness
INSTALL GUIDEFORD ExPEDITION
2015-2017ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION,
WITHOUT CHANGING YOUR RADIO.
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-DSR1-FOR02 maestro.idatalink.com
FORD ExPEDITION 2015-2017
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifi er replacement solution. You are now a few simple steps away from enjoying your new car amplifi er. Before starting your installation, please ensure that your module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Vehicle Wire Reference Chart 5
ADS-DSR1-FOR02 maestro.idatalink.com
FORD ExPEDITION 2015-2017
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS STEP 1
• Remove the factory amplifi er (refer to wire chart for amplifi er location).
• Confi gure the 2 pin connectors on the aFO2 T-harness as shown on the wiring diagram.
STEP 2• Connect the factory amplifi er harnesses to the aFO2
T-harness.
STEP 3• Connect the wires from the aFO2 T-harness to the
aftermarket amplifi er.
Note 1:
If you are running your own speaker wires from the amplifi er to the speakers, this step is not necessary.
Note 2:
The amplifi er output colors and labels on the aFO2 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, see the wiring chart.
• Plug the RCA cables in the aftermarket amplifi er.
STEP 4• Connect all the harnesses to the DSR1 module.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-DSR1-FOR02 maestro.idatalink.com
FORD ExPEDITION 2015-2017
Automotive Data Solutions Inc. © 2017 4
1
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
LF TWEETER
RF TWEETER
CENTER CH
REAR CNTR CH
SUB 1
SUB 2
LEFT FRONT OUT 1LEFT FRONT OUT 1
RIGHT FRONT OUT 2RIGHT FRONT OUT 2
LEFT SPARE OUT 3LEFT SPARE OUT 3
RIGHT SPARE OUT 4RIGHT SPARE OUT 4
LEFT REAR OUT 5LEFT REAR OUT 5
RIGHT REAR OUT 6RIGHT REAR OUT 6
LEFT SUB OUT 7LEFT SUB OUT 7
RIGHT SUB OUT 8RIGHT SUB OUT 8
WIRING DIAGRAM
STEP 1
STEP 2STEP 3FACTORY AMPLIFIER
HARNESSES
WIRES FROMVEHICLE
WHITEWHITE
GREENGREEN
GRAYGRAY
BLUE
PURPLEPURPLE
RED RED
WHITEWHITE/BLACK
GRAYGRAY/BLACK
GREENGREEN/BLACK
PURPLE/BLACKWHITE
WHITE/BLACKGRAY
PURPLE
GRAY/BLACKRED
RED/BLACKRED
RED/BLACK
BLACKBLACK/WHITE
BLACKBLACK/WHITE
CONNECTIONS NOT REQUIRED
AMPLIFIER
N.C.
STEP 4DSR1 MODULE
RCA CABLES
aFO2 T-HARNESS
ADS-DSR1-FOR02 maestro.idatalink.com
FORD ExPEDITION 2015-2017
Automotive Data Solutions Inc. © 2017 5
VEHICLE WIRE REFERENCE CHART
T-Harness Wires Vehicle Wires
WireTag
WireColor Speaker Wire Description Component
Position
LF SPEAKERWhite Left Front Speaker (+)
~White/Black Left Front Speaker (-)
LF TWEETERWhite Left Front Tweeter (+)
~White/Black Left Front Tweeter (-)
RF SPEAKERGray Right Front Speaker (+)
~Gray/Black Right Front Speaker (-)
RF TWEETERGray Right Front Tweeter (+)
~Gray/Black Right Front Tweeter (-)
LR SPEAKERGreen Left Rear Speaker (+)
~Green/Black Left Rear Speaker (-)
RR SPEAKERPurple Right Rear Speaker (+)
~Purple/Black Right Rear Speaker (-)
REAR CNTR CH Red Mono Rear Tweeters (+)
~Red/Black Mono Rear Tweeters (-)
CENTER CH Orange Center Channel (+)
~Orange/Black Center Channel (-)
SUB 1Black Left Rear Subwoofer (+)
~Black/White Left Rear Subwoofer (-)
SUB 2Black Right Rear Subwoofer (+)
~Black/White Right Rear Subwoofer (-)
Amplifi er location
Behind left quarter panel
Note: The amplifi er output colors and labels on the AR-FO2 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, follow this wiring chart.
OPTIONAL ACCESSORIES
PROGRAMMED FIRMWAREADS-DSR1-FOR02
PRODUCTS REQUIREDRockford Fosgate DSR1iDatalink Maestro aFO2 Installation Harness
INSTALL GUIDEFORD ExPLORER
2011-2015ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION,
WITHOUT CHANGING YOUR RADIO.
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-DSR1-FOR02 maestro.idatalink.com
FORD ExPLORER 2011-2015
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifi er replacement solution. You are now a few simple steps away from enjoying your new car amplifi er. Before starting your installation, please ensure that your module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Vehicle Wire Reference Chart 5
ADS-DSR1-FOR02 maestro.idatalink.com
FORD ExPLORER 2011-2015
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS STEP 1
• Remove the factory amplifi er (refer to wire chart for amplifi er location).
• Confi gure the 2 pin connectors on the aFO2 T-harness as shown on the wiring diagram.
STEP 2• Connect the factory amplifi er harnesses to the aFO2
T-harness.
STEP 3• Connect the wires from the aFO2 T-harness to the
aftermarket amplifi er.
Note 1:
If you are running your own speaker wires from the amplifi er to the speakers, this step is not necessary.
Note 2:
The amplifi er output colors and labels on the aFO2 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, see the wiring chart.
• Plug the RCA cables in the aftermarket amplifi er.
STEP 4• Connect all the harnesses to the DSR1 module.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-DSR1-FOR02 maestro.idatalink.com
FORD ExPLORER 2011-2015
Automotive Data Solutions Inc. © 2017 4
1
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
LF TWEETER
RF TWEETER
CENTER CH
REAR CNTR CH
SUB 1
SUB 2
LEFT FRONT OUT 1LEFT FRONT OUT 1
RIGHT FRONT OUT 2RIGHT FRONT OUT 2
LEFT SPARE OUT 3LEFT SPARE OUT 3
RIGHT SPARE OUT 4RIGHT SPARE OUT 4
LEFT REAR OUT 5LEFT REAR OUT 5
RIGHT REAR OUT 6RIGHT REAR OUT 6
LEFT SUB OUT 7LEFT SUB OUT 7
RIGHT SUB OUT 8RIGHT SUB OUT 8
WIRING DIAGRAM
STEP 1
STEP 2STEP 3FACTORY AMPLIFIER
HARNESSES
WIRES FROMVEHICLE
WHITEWHITE
GREENGREEN
GRAYGRAY
BLUE
PURPLEPURPLE
RED RED
WHITEWHITE/BLACK
GRAYGRAY/BLACK
GREENGREEN/BLACK
PURPLE/BLACKWHITE
WHITE/BLACKGRAY
PURPLE
GRAY/BLACKRED
RED/BLACKRED
RED/BLACK
BLACKBLACK/WHITE
BLACKBLACK/WHITE
CONNECTIONS NOT REQUIRED
AMPLIFIER
N.C.
STEP 4DSR1 MODULE
RCA CABLES
aFO2 T-HARNESS
ADS-DSR1-FOR02 maestro.idatalink.com
FORD ExPLORER 2011-2015
Automotive Data Solutions Inc. © 2017 5
VEHICLE WIRE REFERENCE CHART
T-Harness Wires Vehicle Wires
WireTag
WireColor Speaker Wire Description Component
Position
LF SPEAKERWhite Left Front Speaker (+)
~White/Black Left Front Speaker (-)
LF TWEETERWhite Left Front Tweeter (+)
~White/Black Left Front Tweeter (-)
RF SPEAKERGray Right Front Speaker (+)
~Gray/Black Right Front Speaker (-)
RF TWEETERGray Right Front Tweeter (+)
~Gray/Black Right Front Tweeter (-)
LR SPEAKERGreen Left Rear Speaker (+)
~Green/Black Left Rear Speaker (-)
RR SPEAKERPurple Right Rear Speaker (+)
~Purple/Black Right Rear Speaker (-)
REAR CNTR CH Red Mono Rear Tweeters (+)
~Red/Black Mono Rear Tweeters (-)
CENTER CH Orange Center Channel (+)
~Orange/Black Center Channel (-)
SUB 1Black Left Rear Subwoofer (+)
~Black/White Left Rear Subwoofer (-)
SUB 2Black Right Rear Subwoofer (+)
~Black/White Right Rear Subwoofer (-)
Amplifi er location
Base of right C-pillar
Note: The amplifi er output colors and labels on the AR-FO2 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, follow this wiring chart.
OPTIONAL ACCESSORIES
PROGRAMMED FIRMWAREADS-DSR1-FOR02
PRODUCTS REQUIREDRockford Fosgate DSR1iDatalink Maestro aFO2 Installation Harness
INSTALL GUIDEFORD ExPLORER
2016-2017ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION,
WITHOUT CHANGING YOUR RADIO.
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-DSR1-FOR02 maestro.idatalink.com
FORD ExPLORER 2016-2017
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifi er replacement solution. You are now a few simple steps away from enjoying your new car amplifi er. Before starting your installation, please ensure that your module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Vehicle Wire Reference Chart 5
ADS-DSR1-FOR02 maestro.idatalink.com
FORD ExPLORER 2016-2017
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS STEP 1
• Remove the factory amplifi er (refer to wire chart for amplifi er location).
• Confi gure the 2 pin connectors on the aFO2 T-harness as shown on the wiring diagram.
STEP 2• Connect the factory amplifi er harnesses to the aFO2
T-harness.
STEP 3• Connect the wires from the aFO2 T-harness to the
aftermarket amplifi er.
Note 1:
If you are running your own speaker wires from the amplifi er to the speakers, this step is not necessary.
Note 2:
The amplifi er output colors and labels on the aFO2 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, see the wiring chart.
• Plug the RCA cables in the aftermarket amplifi er.
STEP 4• Connect all the harnesses to the DSR1 module.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-DSR1-FOR02 maestro.idatalink.com
FORD ExPLORER 2016-2017
Automotive Data Solutions Inc. © 2017 4
1
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
LF TWEETER
RF TWEETER
CENTER CH
REAR CNTR CH
SUB 1
SUB 2
LEFT FRONT OUT 1LEFT FRONT OUT 1
RIGHT FRONT OUT 2RIGHT FRONT OUT 2
LEFT SPARE OUT 3LEFT SPARE OUT 3
RIGHT SPARE OUT 4RIGHT SPARE OUT 4
LEFT REAR OUT 5LEFT REAR OUT 5
RIGHT REAR OUT 6RIGHT REAR OUT 6
LEFT SUB OUT 7LEFT SUB OUT 7
RIGHT SUB OUT 8RIGHT SUB OUT 8
WIRING DIAGRAM
STEP 1
STEP 2STEP 3FACTORY AMPLIFIER
HARNESSES
WIRES FROMVEHICLE
WHITEWHITE
GREENGREEN
GRAYGRAY
BLUE
PURPLEPURPLE
RED RED
WHITEWHITE/BLACK
GRAYGRAY/BLACK
GREENGREEN/BLACK
PURPLE/BLACKWHITE
WHITE/BLACKGRAY
PURPLE
GRAY/BLACKRED
RED/BLACKRED
RED/BLACK
BLACKBLACK/WHITE
BLACKBLACK/WHITE
CONNECTIONS NOT REQUIRED
AMPLIFIER
N.C.
STEP 4DSR1 MODULE
RCA CABLES
aFO2 T-HARNESS
ADS-DSR1-FOR02 maestro.idatalink.com
FORD ExPLORER 2016-2017
Automotive Data Solutions Inc. © 2017 5
VEHICLE WIRE REFERENCE CHART
T-Harness Wires Vehicle Wires
WireTag
WireColor Speaker Wire Description Component
Position
LF SPEAKERWhite Left Front Speaker (+)
~White/Black Left Front Speaker (-)
LF TWEETERWhite Left Front Tweeter (+)
~White/Black Left Front Tweeter (-)
RF SPEAKERGray Right Front Speaker (+)
~Gray/Black Right Front Speaker (-)
RF TWEETERGray Right Front Tweeter (+)
~Gray/Black Right Front Tweeter (-)
LR SPEAKERGreen Left Rear Speaker (+)
~Green/Black Left Rear Speaker (-)
RR SPEAKERPurple Right Rear Speaker (+)
~Purple/Black Right Rear Speaker (-)
REAR CNTR CH Red Mono Rear Tweeters (+)
~Red/Black Mono Rear Tweeters (-)
CENTER CH Orange Center Channel (+)
~Orange/Black Center Channel (-)
SUB 1Black Left Rear Speaker (+)
~Black/White Left Rear Speaker (-)
SUB 2Black Right Rear Speaker (+)
~Black/White Right Rear Speaker (-)
Amplifi er location
Base of right C-pillar
Note 1: The amplifi er output colors and labels on the AR-FO2 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, follow this wiring chart.
Note 2: The wires for the subwoofer are not pinned in the FO2 harness.Because the subwoofer is located near the factory amplifi er, the wires can be connected directly at the subwoofer instead.
OPTIONAL ACCESSORIES
PROGRAMMED FIRMWAREADS-DSR1-FOR02
PRODUCTS REQUIREDRockford Fosgate DSR1iDatalink Maestro aFO2 Installation Harness
INSTALL GUIDEFORD F150
2013-2017ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION,
WITHOUT CHANGING YOUR RADIO.
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-DSR1-FOR02 maestro.idatalink.com
FORD F150 2013-2017
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifi er replacement solution. You are now a few simple steps away from enjoying your new car amplifi er. Before starting your installation, please ensure that your module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Vehicle Wire Reference Chart 5
ADS-DSR1-FOR02 maestro.idatalink.com
FORD F150 2013-2017
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS STEP 1
• Remove the factory amplifi er (refer to wire chart for amplifi er location).
• Confi gure the 2 pin connectors on the aFO2 T-harness as shown on the wiring diagram.
STEP 2• Connect the factory amplifi er harnesses to the aFO2
T-harness.
STEP 3• Connect the wires from the aFO2 T-harness to the
aftermarket amplifi er.
Note 1:
If you are running your own speaker wires from the amplifi er to the speakers, this step is not necessary.
Note 2:
The amplifi er output colors and labels on the aFO2 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, see the wiring chart.
• Plug the RCA cables in the aftermarket amplifi er.
STEP 4• Connect all the harnesses to the DSR1 module.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-DSR1-FOR02 maestro.idatalink.com
FORD F150 2013-2017
Automotive Data Solutions Inc. © 2017 4
1
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
LF TWEETER
RF TWEETER
CENTER CH
REAR CNTR CH
SUB 1
SUB 2
LEFT FRONT OUT 1LEFT FRONT OUT 1
RIGHT FRONT OUT 2RIGHT FRONT OUT 2
LEFT SPARE OUT 3LEFT SPARE OUT 3
RIGHT SPARE OUT 4RIGHT SPARE OUT 4
LEFT REAR OUT 5LEFT REAR OUT 5
RIGHT REAR OUT 6RIGHT REAR OUT 6
LEFT SUB OUT 7LEFT SUB OUT 7
RIGHT SUB OUT 8RIGHT SUB OUT 8
WIRING DIAGRAM
STEP 1
STEP 2STEP 3FACTORY AMPLIFIER
HARNESSES
WIRES FROMVEHICLE
WHITEWHITE
GREENGREEN
GRAYGRAY
BLUE
PURPLEPURPLE
RED RED
WHITEWHITE/BLACK
GRAYGRAY/BLACK
GREENGREEN/BLACK
PURPLE/BLACKWHITE
WHITE/BLACKGRAY
PURPLE
GRAY/BLACKRED
RED/BLACKRED
RED/BLACK
BLACKBLACK/WHITE
BLACKBLACK/WHITE
CONNECTIONS NOT REQUIRED
AMPLIFIER
N.C.
STEP 4DSR1 MODULE
RCA CABLES
aFO2 T-HARNESS
ADS-DSR1-FOR02 maestro.idatalink.com
FORD F150 2013-2017
Automotive Data Solutions Inc. © 2017 5
VEHICLE WIRE REFERENCE CHART
T-Harness Wires Vehicle Wires
WireTag
WireColor Speaker Wire Description Component
Position
LF SPEAKERWhite Left Front Speaker (+)
~White/Black Left Front Speaker (-)
LF TWEETERWhite Left Front Tweeter (+)
~White/Black Left Front Tweeter (-)
RF SPEAKERGray Right Front Speaker (+)
~Gray/Black Right Front Speaker (-)
RF TWEETERGray Right Front Tweeter (+)
~Gray/Black Right Front Tweeter (-)
LR SPEAKERGreen Left Rear Speaker (+)
~Green/Black Left Rear Speaker (-)
RR SPEAKERPurple Right Rear Speaker (+)
~Purple/Black Right Rear Speaker (-)
REAR CNTR CH Red n/a
~Red/Black n/a
CENTER CH Orange Center Channel (+)
~Orange/Black Center Channel (-)
SUB 1Black Left Rear Subwoofer (+)
~Black/White Left Rear Subwoofer (-)
SUB 2Black Right Rear Subwoofer (+)
~Black/White Right Rear Subwoofer (-)
Amplifi er location
(2013-2014) : Under center console
(2015-2017 regular cab) : Base of left B-pillar
(2015-2017 Super cab/Crew cab) : Base of left C-pillar
Note: The amplifi er output colors and labels on the AR-FO2 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, follow this wiring chart.
OPTIONAL ACCESSORIES
PROGRAMMED FIRMWAREADS-DSR1-FOR02
PRODUCTS REQUIREDRockford Fosgate DSR1iDatalink Maestro aFO2 Installation Harness
INSTALL GUIDEFORD F250
2013-2017ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION,
WITHOUT CHANGING YOUR RADIO.
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-DSR1-FOR02 maestro.idatalink.com
FORD F250 2013-2017
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifi er replacement solution. You are now a few simple steps away from enjoying your new car amplifi er. Before starting your installation, please ensure that your module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Vehicle Wire Reference Chart 5
ADS-DSR1-FOR02 maestro.idatalink.com
FORD F250 2013-2017
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS STEP 1
• Remove the factory amplifi er (refer to wire chart for amplifi er location).
• Confi gure the 2 pin connectors on the aFO2 T-harness as shown on the wiring diagram.
STEP 2• Connect the factory amplifi er harnesses to the aFO2
T-harness.
STEP 3• Connect the wires from the aFO2 T-harness to the
aftermarket amplifi er.
Note 1:
If you are running your own speaker wires from the amplifi er to the speakers, this step is not necessary.
Note 2:
The amplifi er output colors and labels on the aFO2 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, see the wiring chart.
• Plug the RCA cables in the aftermarket amplifi er.
STEP 4• Connect all the harnesses to the DSR1 module.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-DSR1-FOR02 maestro.idatalink.com
FORD F250 2013-2017
Automotive Data Solutions Inc. © 2017 4
1
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
LF TWEETER
RF TWEETER
CENTER CH
REAR CNTR CH
SUB 1
SUB 2
LEFT FRONT OUT 1LEFT FRONT OUT 1
RIGHT FRONT OUT 2RIGHT FRONT OUT 2
LEFT SPARE OUT 3LEFT SPARE OUT 3
RIGHT SPARE OUT 4RIGHT SPARE OUT 4
LEFT REAR OUT 5LEFT REAR OUT 5
RIGHT REAR OUT 6RIGHT REAR OUT 6
LEFT SUB OUT 7LEFT SUB OUT 7
RIGHT SUB OUT 8RIGHT SUB OUT 8
WIRING DIAGRAM
STEP 1
STEP 2STEP 3FACTORY AMPLIFIER
HARNESSES
WIRES FROMVEHICLE
WHITEWHITE
GREENGREEN
GRAYGRAY
BLUE
PURPLEPURPLE
RED RED
WHITEWHITE/BLACK
GRAYGRAY/BLACK
GREENGREEN/BLACK
PURPLE/BLACKWHITE
WHITE/BLACKGRAY
PURPLE
GRAY/BLACKRED
RED/BLACKRED
RED/BLACK
BLACKBLACK/WHITE
BLACKBLACK/WHITE
CONNECTIONS NOT REQUIRED
AMPLIFIER
N.C.
STEP 4DSR1 MODULE
RCA CABLES
aFO2 T-HARNESS
ADS-DSR1-FOR02 maestro.idatalink.com
FORD F250 2013-2017
Automotive Data Solutions Inc. © 2017 5
VEHICLE WIRE REFERENCE CHART
T-Harness Wires Vehicle Wires
WireTag
WireColor Speaker Wire Description Component
Position
LF SPEAKERWhite Left Front Speaker (+)
~White/Black Left Front Speaker (-)
LF TWEETERWhite Left Front Tweeter (+)
~White/Black Left Front Tweeter (-)
RF SPEAKERGray Right Front Speaker (+)
~Gray/Black Right Front Speaker (-)
RF TWEETERGray Right Front Tweeter (+)
~Gray/Black Right Front Tweeter (-)
LR SPEAKERGreen Left Rear Speaker (+)
~Green/Black Left Rear Speaker (-)
RR SPEAKERPurple Right Rear Speaker (+)
~Purple/Black Right Rear Speaker (-)
REAR CNTR CH Red n/a
~Red/Black n/a
CENTER CH Orange Center Channel (+)
~Orange/Black Center Channel (-)
SUB 1Black Left Rear Subwoofer (+)
~Black/White Left Rear Subwoofer (-)
SUB 2Black Right Rear Subwoofer (+)
~Black/White Right Rear Subwoofer (-)
Amplifi er location
Crew cab : Base of left C-pillar
Super cab : Rear center of fl oor
Note: The amplifi er output colors and labels on the AR-FO2 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, follow this wiring chart.
OPTIONAL ACCESSORIES
PROGRAMMED FIRMWAREADS-DSR1-FOR02
PRODUCTS REQUIREDRockford Fosgate DSR1iDatalink Maestro aFO2 Installation Harness
INSTALL GUIDEFORD F350
2013-2017ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION,
WITHOUT CHANGING YOUR RADIO.
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-DSR1-FOR02 maestro.idatalink.com
FORD F350 2013-2017
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifi er replacement solution. You are now a few simple steps away from enjoying your new car amplifi er. Before starting your installation, please ensure that your module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Vehicle Wire Reference Chart 5
ADS-DSR1-FOR02 maestro.idatalink.com
FORD F350 2013-2017
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS STEP 1
• Remove the factory amplifi er (refer to wire chart for amplifi er location).
• Confi gure the 2 pin connectors on the aFO2 T-harness as shown on the wiring diagram.
STEP 2• Connect the factory amplifi er harnesses to the aFO2
T-harness.
STEP 3• Connect the wires from the aFO2 T-harness to the
aftermarket amplifi er.
Note 1:
If you are running your own speaker wires from the amplifi er to the speakers, this step is not necessary.
Note 2:
The amplifi er output colors and labels on the aFO2 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, see the wiring chart.
• Plug the RCA cables in the aftermarket amplifi er.
STEP 4• Connect all the harnesses to the DSR1 module.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-DSR1-FOR02 maestro.idatalink.com
FORD F350 2013-2017
Automotive Data Solutions Inc. © 2017 4
1
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
LF TWEETER
RF TWEETER
CENTER CH
REAR CNTR CH
SUB 1
SUB 2
LEFT FRONT OUT 1LEFT FRONT OUT 1
RIGHT FRONT OUT 2RIGHT FRONT OUT 2
LEFT SPARE OUT 3LEFT SPARE OUT 3
RIGHT SPARE OUT 4RIGHT SPARE OUT 4
LEFT REAR OUT 5LEFT REAR OUT 5
RIGHT REAR OUT 6RIGHT REAR OUT 6
LEFT SUB OUT 7LEFT SUB OUT 7
RIGHT SUB OUT 8RIGHT SUB OUT 8
WIRING DIAGRAM
STEP 1
STEP 2STEP 3FACTORY AMPLIFIER
HARNESSES
WIRES FROMVEHICLE
WHITEWHITE
GREENGREEN
GRAYGRAY
BLUE
PURPLEPURPLE
RED RED
WHITEWHITE/BLACK
GRAYGRAY/BLACK
GREENGREEN/BLACK
PURPLE/BLACKWHITE
WHITE/BLACKGRAY
PURPLE
GRAY/BLACKRED
RED/BLACKRED
RED/BLACK
BLACKBLACK/WHITE
BLACKBLACK/WHITE
CONNECTIONS NOT REQUIRED
AMPLIFIER
N.C.
STEP 4DSR1 MODULE
RCA CABLES
aFO2 T-HARNESS
ADS-DSR1-FOR02 maestro.idatalink.com
FORD F350 2013-2017
Automotive Data Solutions Inc. © 2017 5
VEHICLE WIRE REFERENCE CHART
T-Harness Wires Vehicle Wires
WireTag
WireColor Speaker Wire Description Component
Position
LF SPEAKERWhite Left Front Speaker (+)
~White/Black Left Front Speaker (-)
LF TWEETERWhite Left Front Tweeter (+)
~White/Black Left Front Tweeter (-)
RF SPEAKERGray Right Front Speaker (+)
~Gray/Black Right Front Speaker (-)
RF TWEETERGray Right Front Tweeter (+)
~Gray/Black Right Front Tweeter (-)
LR SPEAKERGreen Left Rear Speaker (+)
~Green/Black Left Rear Speaker (-)
RR SPEAKERPurple Right Rear Speaker (+)
~Purple/Black Right Rear Speaker (-)
REAR CNTR CH Red n/a
~Red/Black n/a
CENTER CH Orange Center Channel (+)
~Orange/Black Center Channel (-)
SUB 1Black Left Rear Subwoofer (+)
~Black/White Left Rear Subwoofer (-)
SUB 2Black Right Rear Subwoofer (+)
~Black/White Right Rear Subwoofer (-)
Amplifi er location
Crew cab : Base of left C-pillar
Super cab : Rear center of fl oor
Note: The amplifi er output colors and labels on the AR-FO2 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, follow this wiring chart.
OPTIONAL ACCESSORIES
PROGRAMMED FIRMWAREADS-DSR1-FOR02
PRODUCTS REQUIREDRockford Fosgate DSR1iDatalink Maestro aFO2 Installation Harness
INSTALL GUIDEFORD FLEx
2013-2017ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION,
WITHOUT CHANGING YOUR RADIO.
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-DSR1-FOR02 maestro.idatalink.com
FORD FLEx 2013-2017
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifi er replacement solution. You are now a few simple steps away from enjoying your new car amplifi er. Before starting your installation, please ensure that your module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Vehicle Wire Reference Chart 5
ADS-DSR1-FOR02 maestro.idatalink.com
FORD FLEx 2013-2017
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS STEP 1
• Remove the factory amplifi er (refer to wire chart for amplifi er location).
• Confi gure the 2 pin connectors on the aFO2 T-harness as shown on the wiring diagram.
STEP 2• Connect the factory amplifi er harnesses to the aFO2
T-harness.
STEP 3• Connect the wires from the aFO2 T-harness to the
aftermarket amplifi er.
Note 1:
If you are running your own speaker wires from the amplifi er to the speakers, this step is not necessary.
Note 2:
The amplifi er output colors and labels on the aFO2 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, see the wiring chart.
• Plug the RCA cables in the aftermarket amplifi er.
STEP 4• Connect all the harnesses to the DSR1 module.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-DSR1-FOR02 maestro.idatalink.com
FORD FLEx 2013-2017
Automotive Data Solutions Inc. © 2017 4
1
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
LF TWEETER
RF TWEETER
CENTER CH
REAR CNTR CH
SUB 1
SUB 2
LEFT FRONT OUT 1LEFT FRONT OUT 1
RIGHT FRONT OUT 2RIGHT FRONT OUT 2
LEFT SPARE OUT 3LEFT SPARE OUT 3
RIGHT SPARE OUT 4RIGHT SPARE OUT 4
LEFT REAR OUT 5LEFT REAR OUT 5
RIGHT REAR OUT 6RIGHT REAR OUT 6
LEFT SUB OUT 7LEFT SUB OUT 7
RIGHT SUB OUT 8RIGHT SUB OUT 8
WIRING DIAGRAM
STEP 1
STEP 2STEP 3FACTORY AMPLIFIER
HARNESSES
WIRES FROMVEHICLE
WHITEWHITE
GREENGREEN
GRAYGRAY
BLUE
PURPLEPURPLE
RED RED
WHITEWHITE/BLACK
GRAYGRAY/BLACK
GREENGREEN/BLACK
PURPLE/BLACKWHITE
WHITE/BLACKGRAY
PURPLE
GRAY/BLACKRED
RED/BLACKRED
RED/BLACK
BLACKBLACK/WHITE
BLACKBLACK/WHITE
CONNECTIONS NOT REQUIRED
AMPLIFIER
N.C.
STEP 4DSR1 MODULE
RCA CABLES
aFO2 T-HARNESS
ADS-DSR1-FOR02 maestro.idatalink.com
FORD FLEx 2013-2017
Automotive Data Solutions Inc. © 2017 5
VEHICLE WIRE REFERENCE CHART
T-Harness Wires Vehicle Wires
WireTag
WireColor Speaker Wire Description Component
Position
LF SPEAKERWhite Left Front Speaker (+)
~White/Black Left Front Speaker (-)
LF TWEETERWhite Left Front Tweeter (+)
~White/Black Left Front Tweeter (-)
RF SPEAKERGray Right Front Speaker (+)
~Gray/Black Right Front Speaker (-)
RF TWEETERGray Right Front Tweeter (+)
~Gray/Black Right Front Tweeter (-)
LR SPEAKERGreen Left Rear Speaker (+)
~Green/Black Left Rear Speaker (-)
RR SPEAKERPurple Right Rear Speaker (+)
~Purple/Black Right Rear Speaker (-)
REAR CNTR CH Red Rear Center Channel (+)
~Red/Black Rear Center Channel (-)
CENTER CH Orange Front Center Channel (+)
~Orange/Black Front Center Channel (-)
SUB 1Black Left Rear Subwoofer (+)
~Black/White Left Rear Subwoofer (-)
SUB 2Black Right Rear Subwoofer (+)
~Black/White Right Rear Subwoofer (-)
Amplifi er location
Behind right rear quarter panel
Note: The amplifi er output colors and labels on the AR-FO2 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, follow this wiring chart.
OPTIONAL ACCESSORIES
PROGRAMMED FIRMWAREADS-DSR1-FOR02
PRODUCTS REQUIREDRockford Fosgate DSR1iDatalink Maestro aFO2 Installation Harness
INSTALL GUIDEFORD FOCUS
2012-2017ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION,
WITHOUT CHANGING YOUR RADIO.
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-DSR1-FOR02 maestro.idatalink.com
FORD FOCUS 2012-2017
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifi er replacement solution. You are now a few simple steps away from enjoying your new car amplifi er. Before starting your installation, please ensure that your module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Vehicle Wire Reference Chart 5
ADS-DSR1-FOR02 maestro.idatalink.com
FORD FOCUS 2012-2017
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS STEP 1
• Remove the factory amplifi er (refer to wire chart for amplifi er location).
• Confi gure the 2 pin connectors on the aFO2 T-harness as shown on the wiring diagram.
STEP 2• Connect the factory amplifi er harnesses to the aFO2
T-harness.
STEP 3• Connect the wires from the aFO2 T-harness to the
aftermarket amplifi er.
Note 1:
If you are running your own speaker wires from the amplifi er to the speakers, this step is not necessary.
Note 2:
The amplifi er output colors and labels on the aFO2 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, see the wiring chart.
• Plug the RCA cables in the aftermarket amplifi er.
STEP 4• Connect all the harnesses to the DSR1 module.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-DSR1-FOR02 maestro.idatalink.com
FORD FOCUS 2012-2017
Automotive Data Solutions Inc. © 2017 4
1
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
LF TWEETER
RF TWEETER
CENTER CH
REAR CNTR CH
SUB 1
SUB 2
LEFT FRONT OUT 1LEFT FRONT OUT 1
RIGHT FRONT OUT 2RIGHT FRONT OUT 2
LEFT SPARE OUT 3LEFT SPARE OUT 3
RIGHT SPARE OUT 4RIGHT SPARE OUT 4
LEFT REAR OUT 5LEFT REAR OUT 5
RIGHT REAR OUT 6RIGHT REAR OUT 6
LEFT SUB OUT 7LEFT SUB OUT 7
RIGHT SUB OUT 8RIGHT SUB OUT 8
WIRING DIAGRAM
STEP 1
STEP 2STEP 3FACTORY AMPLIFIER
HARNESSES
WIRES FROMVEHICLE
WHITEWHITE
GREENGREEN
GRAYGRAY
BLUE
PURPLEPURPLE
RED RED
WHITEWHITE/BLACK
GRAYGRAY/BLACK
GREENGREEN/BLACK
PURPLE/BLACKWHITE
WHITE/BLACKGRAY
PURPLE
GRAY/BLACKRED
RED/BLACKRED
RED/BLACK
BLACKBLACK/WHITE
BLACKBLACK/WHITE
CONNECTIONS NOT REQUIRED
AMPLIFIER
N.C.
STEP 4DSR1 MODULE
RCA CABLES
aFO2 T-HARNESS
ADS-DSR1-FOR02 maestro.idatalink.com
FORD FOCUS 2012-2017
Automotive Data Solutions Inc. © 2017 5
VEHICLE WIRE REFERENCE CHART
T-Harness Wires Vehicle Wires
WireTag
WireColor Speaker Wire Description Component
Position
LF SPEAKERWhite Left Front Speaker (+)
~White/Black Left Front Speaker (-)
LF TWEETERWhite Left Front Tweeter (+)
~White/Black Left Front Tweeter (-)
RF SPEAKERGray Right Front Speaker (+)
~Gray/Black Right Front Speaker (-)
RF TWEETERGray Right Front Tweeter (+)
~Gray/Black Right Front Tweeter (-)
LR SPEAKERGreen Left Rear Speaker (+)
~Green/Black Left Rear Speaker (-)
RR SPEAKERPurple Right Rear Speaker (+)
~Purple/Black Right Rear Speaker (-)
REAR CNTR CH Red n/a
~Red/Black n/a
CENTER CH Orange Center Channel (+)
~Orange/Black Center Channel (-)
SUB 1Black Left Rear Subwoofer (+)
~Black/White Left Rear Subwoofer (-)
SUB 2Black Right Rear Subwoofer (+)
~Black/White Right Rear Subwoofer (-)
Amplifi er location
Left front of luggage compartment
Note: The amplifi er output colors and labels on the AR-FO2 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, follow this wiring chart.
OPTIONAL ACCESSORIES
PROGRAMMED FIRMWAREADS-DSR1-FOR02
PRODUCTS REQUIREDRockford Fosgate DSR1iDatalink Maestro aFO2 Installation Harness
INSTALL GUIDEFORD FUSION
2013-2016ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION,
WITHOUT CHANGING YOUR RADIO.
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-DSR1-FOR02 maestro.idatalink.com
FORD FUSION 2013-2016
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifi er replacement solution. You are now a few simple steps away from enjoying your new car amplifi er. Before starting your installation, please ensure that your module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Vehicle Wire Reference Chart 5
ADS-DSR1-FOR02 maestro.idatalink.com
FORD FUSION 2013-2016
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS STEP 1
• Remove the factory amplifi er (refer to wire chart for amplifi er location).
• Confi gure the 2 pin connectors on the aFO2 T-harness as shown on the wiring diagram.
STEP 2• Connect the factory amplifi er harnesses to the aFO2
T-harness.
STEP 3• Connect the wires from the aFO2 T-harness to the
aftermarket amplifi er.
Note 1:
If you are running your own speaker wires from the amplifi er to the speakers, this step is not necessary.
Note 2:
The amplifi er output colors and labels on the aFO2 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, see the wiring chart.
• Plug the RCA cables in the aftermarket amplifi er.
STEP 4• Connect all the harnesses to the DSR1 module.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-DSR1-FOR02 maestro.idatalink.com
FORD FUSION 2013-2016
Automotive Data Solutions Inc. © 2017 4
1
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
LF TWEETER
RF TWEETER
CENTER CH
REAR CNTR CH
SUB 1
SUB 2
LEFT FRONT OUT 1LEFT FRONT OUT 1
RIGHT FRONT OUT 2RIGHT FRONT OUT 2
LEFT SPARE OUT 3LEFT SPARE OUT 3
RIGHT SPARE OUT 4RIGHT SPARE OUT 4
LEFT REAR OUT 5LEFT REAR OUT 5
RIGHT REAR OUT 6RIGHT REAR OUT 6
LEFT SUB OUT 7LEFT SUB OUT 7
RIGHT SUB OUT 8RIGHT SUB OUT 8
WIRING DIAGRAM
STEP 1
STEP 2STEP 3FACTORY AMPLIFIER
HARNESSES
WIRES FROMVEHICLE
WHITEWHITE
GREENGREEN
GRAYGRAY
BLUE
PURPLEPURPLE
RED RED
WHITEWHITE/BLACK
GRAYGRAY/BLACK
GREENGREEN/BLACK
PURPLE/BLACKWHITE
WHITE/BLACKGRAY
PURPLE
GRAY/BLACKRED
RED/BLACKRED
RED/BLACK
BLACKBLACK/WHITE
BLACKBLACK/WHITE
CONNECTIONS NOT REQUIRED
AMPLIFIER
N.C.
STEP 4DSR1 MODULE
RCA CABLES
aFO2 T-HARNESS
ADS-DSR1-FOR02 maestro.idatalink.com
FORD FUSION 2013-2016
Automotive Data Solutions Inc. © 2017 5
VEHICLE WIRE REFERENCE CHART
T-Harness Wires Vehicle Wires
WireTag
WireColor Speaker Wire Description Component
Position
LF SPEAKERWhite Left Front Speaker (+)
~White/Black Left Front Speaker (-)
LF TWEETERWhite Left Front Tweeter (+)
~White/Black Left Front Tweeter (-)
RF SPEAKERGray Right Front Speaker (+)
~Gray/Black Right Front Speaker (-)
RF TWEETERGray Right Front Tweeter (+)
~Gray/Black Right Front Tweeter (-)
LR SPEAKERGreen Left Rear Speaker (+)
~Green/Black Left Rear Speaker (-)
RR SPEAKERPurple Right Rear Speaker (+)
~Purple/Black Right Rear Speaker (-)
REAR CNTR CH Red Rear Center Channel (+)
~Red/Black Rear Center Channel (-)
CENTER CH Orange Front Center Channel (+)
~Orange/Black Front Center Channel (-)
SUB 1Black Left Rear Subwoofer (+)
~Black/White Left Rear Subwoofer (-)
SUB 2Black Right Rear Subwoofer (+)
~Black/White Right Rear Subwoofer (-)
Amplifi er location
Right front of luggage compartment
Note: The amplifi er output colors and labels on the AR-FO2 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, follow this wiring chart.
OPTIONAL ACCESSORIES
PROGRAMMED FIRMWAREADS-DSR1-FOR02
PRODUCTS REQUIREDRockford Fosgate DSR1iDatalink Maestro aFO2 Installation Harness
INSTALL GUIDEFORD TAURUS
2013-2017ENABLE A SEAMLESS AFTERMARKET AMPLIFIER INSTALLATION,
WITHOUT CHANGING YOUR RADIO.
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
ADS-DSR1-FOR02 maestro.idatalink.com
FORD TAURUS 2013-2017
Automotive Data Solutions Inc. © 2017 2
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro / Rockford Fosgate DSR1 Amplifi er replacement solution. You are now a few simple steps away from enjoying your new car amplifi er. Before starting your installation, please ensure that your module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Vehicle Wire Reference Chart 5
ADS-DSR1-FOR02 maestro.idatalink.com
FORD TAURUS 2013-2017
Automotive Data Solutions Inc. © 2017 3
INSTALLATION INSTRUCTIONS STEP 1
• Remove the factory amplifi er (refer to wire chart for amplifi er location).
• Confi gure the 2 pin connectors on the aFO2 T-harness as shown on the wiring diagram.
STEP 2• Connect the factory amplifi er harnesses to the aFO2
T-harness.
STEP 3• Connect the wires from the aFO2 T-harness to the
aftermarket amplifi er.
Note 1:
If you are running your own speaker wires from the amplifi er to the speakers, this step is not necessary.
Note 2:
The amplifi er output colors and labels on the aFO2 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, see the wiring chart.
• Plug the RCA cables in the aftermarket amplifi er.
STEP 4• Connect all the harnesses to the DSR1 module.
• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”
1
ADS-DSR1-FOR02 maestro.idatalink.com
FORD TAURUS 2013-2017
Automotive Data Solutions Inc. © 2017 4
1
LF SPEAKER
RF SPEAKER
LR SPEAKER
RR SPEAKER
LF TWEETER
RF TWEETER
CENTER CH
REAR CNTR CH
SUB 1
SUB 2
LEFT FRONT OUT 1LEFT FRONT OUT 1
RIGHT FRONT OUT 2RIGHT FRONT OUT 2
LEFT SPARE OUT 3LEFT SPARE OUT 3
RIGHT SPARE OUT 4RIGHT SPARE OUT 4
LEFT REAR OUT 5LEFT REAR OUT 5
RIGHT REAR OUT 6RIGHT REAR OUT 6
LEFT SUB OUT 7LEFT SUB OUT 7
RIGHT SUB OUT 8RIGHT SUB OUT 8
WIRING DIAGRAM
STEP 1
STEP 2STEP 3FACTORY AMPLIFIER
HARNESSES
WIRES FROMVEHICLE
WHITEWHITE
GREENGREEN
GRAYGRAY
BLUE
PURPLEPURPLE
RED RED
WHITEWHITE/BLACK
GRAYGRAY/BLACK
GREENGREEN/BLACK
PURPLE/BLACKWHITE
WHITE/BLACKGRAY
PURPLE
GRAY/BLACKRED
RED/BLACKRED
RED/BLACK
BLACKBLACK/WHITE
BLACKBLACK/WHITE
CONNECTIONS NOT REQUIRED
AMPLIFIER
N.C.
STEP 4DSR1 MODULE
RCA CABLES
aFO2 T-HARNESS
ADS-DSR1-FOR02 maestro.idatalink.com
FORD TAURUS 2013-2017
Automotive Data Solutions Inc. © 2017 5
VEHICLE WIRE REFERENCE CHART
T-Harness Wires Vehicle Wires
WireTag
WireColor Speaker Wire Description Component
Position
LF SPEAKERWhite Left Front Speaker (+)
~White/Black Left Front Speaker (-)
LF TWEETERWhite Left Front Tweeter (+)
~White/Black Left Front Tweeter (-)
RF SPEAKERGray Right Front Speaker (+)
~Gray/Black Right Front Speaker (-)
RF TWEETERGray Right Front Tweeter (+)
~Gray/Black Right Front Tweeter (-)
LR SPEAKERGreen Left Rear Speaker (+)
~Green/Black Left Rear Speaker (-)
RR SPEAKERPurple Right Rear Speaker (+)
~Purple/Black Right Rear Speaker (-)
REAR CNTR CH Red Rear Center Channel (+)
~Red/Black Rear Center Channel (-)
CENTER CH Orange Front Center Channel (+)
~Orange/Black Front Center Channel (-)
SUB 1Black Left Rear Subwoofer (+)
~Black/White Left Rear Subwoofer (-)
SUB 2Black Right Rear Subwoofer (+)
~Black/White Right Rear Subwoofer (-)
Amplifi er location
Left front of luggage compartment
Note: The amplifi er output colors and labels on the AR-FO2 T-harness do not correspond to the vehicle. For vehicle specifi c wiring designation, follow this wiring chart.