Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Note: Schematic and product recommendations are intended as a general guide only. Products listed are typically the product series names. Please refer to equipment builder manual for final lubrication recommendations or consult your Mobil Industrial Lubricants team for additional products. NOT TO SCALE.
From gearboxes and bearings to U-joint shafts and hydraulic systems, whatever equipment you’re lubricating, you’ll find there’s a Mobil Industrial Lubricant to meet your demands — each one formulated to offer outstanding protection and oil life. For a complete list of Mobil Industrial Lubricants, go to mobilindustrial.com.
How we help keep your iron and steel forming operation going strong.
Reheat Furnace •Combustion Air Fans — Mobilith SHC
•Fan Bearings — Mobilith SHC
•Roller Bearings — Mobilith SHC
•Hydraulic System — Mobil SHC 500
Table
•Gearboxes — Mobil SHC 600, Mobil SHC Gear
Hot Strip Mill — Pinion Stands•Central Grease System — Mobil Centaur XHP,
Mobilgrease XHP
•Backup Roll Bearings — Vacuoline 100
•Work Roll Bearings — Mobil Centaur XHP, Mobilgrease XHP
•Gearbox — Mobilgear 600 XP
•Hydraulic System — Mobil DTE 10 Excel
Drive Spindle Connectors
•Geared - Grease — Mobilux EP 111
•Geared - Oiled — Mobilgear 600 XP
•Slipper — Mobilith SHC
•U-joint Shafts — Mobilith SHC
•Spade Connection — Mobil Centaur XHP
Coiler•Mandrel — Mobil Centaur XHP Mine,
Mobilgrease XHP Mine
Descale Pumps•Gearbox — Mobil SHC 600, Mobil SHC Gear
•Couplings — Mobilgrease XTC
Rolling Mill•Fan Bearing — Mobilith SHC
•Conveyor Roller Bearing — Mobilith SHC, Mobil Centaur XHP
Pinion Stand
•Work Roll Bearings — Mobil Centaur XHP, Mobilgrease XHP
•Gearbox — Mobilgear 600 XP
•Hydraulic System — Mobil DTE 10 Excel
Drive Spindle Connectors
•Geared - Grease — Mobilux EP 111
•Geared - Oiled — Mobilgear 600 XP
•Slipper — Mobilith SHC
•U-joint Shafts — Mobilith SHC
•Spade Connection — Mobil Centaur XHP
•Backup Roll Bearings — Mobil Vacuoline 100
•No Twist Rod Mill — Mobil Vacuoline 500
Pickle Line•Drive Gearbox — Mobil SHC 600,
Mobil SHC Gear
•Roller Bearing — Mobilith SHC, Mobil Centaur XHP
Plate MillPinion Stand
•Gearbox — Mobilgear 600 XP
•Hydraulic System — Mobil DTE 10 Excel
Drive Spindle Connectors
•Geared - Grease — Mobilux EP 111
•Geared - Oiled — Mobilgear 600 XP
•Slipper — Mobilith SHC
•U-joint Shafts — Mobilith SHC
•Spade Connection — Mobil Centaur XHP
•Backup Roll Bearings — Mobil Vacuoline 100
Cold Rolling MillPinion Stand
•Gearbox — Mobilgear 600 XP
•Hydraulic System — Mobil DTE 10 Excel
Drive Spindle Connectors
•Geared - Grease — Mobilux EP 111
•Geared - Oiled — Mobilgear 600 XP
•Slipper — Mobilith SHC
•U-joint Shafts — Mobilith SHC
•Spade Connection — Mobil Centaur XHP
•Backup Roll Bearings — Mobil Vacuoline 100
Heavy Duty Forklift•Engine — Mobil Delvac 1300 Super
•Hydraulic System — Mobil DTE 10 Excel
•Grease Points — Mobilgrease XHP
HEAVY-DUTY FORKLIFT TRUCK
BLOOMS AND BILLETS
ROLLING MILL
STRUCTURAL MILL
BARS AND RODS
SEAMLESS TUBE
COLD MILL
PICKLE LINE
HOT STRIP MILL HOT ROLLED COILS OR SHEETS
PLATE MILL
PLATES SLABS AND THIN SLABS
REHEAT FURNACE
FROMSTEELPRODUCTION
PICKLED AND OILED COILS
COLD ROLLED COILS AND SHEETS
HEAT TREATINGCOATING AND FINISHING LINES
© 2011 Exxon Mobil CorporationMobil, Mobil SHC, Mobilgear, Mobilith, Mobilgrease, Delvac, DTE, Centaur, Mobilux, and Vacuoline are trademarks of Exxon Mobil Corporation or one of its subsidiaries.
ANNEALING FURNACE
1
3
7
84
5
62
1
3
8
4
7
6
2
5
PIPE PRODUCTS
9
9