Upload
flyinggecko
View
129
Download
7
Embed Size (px)
Citation preview
HOWTO: INSTALL CM93ED3 CHARTS WITH WINDOWS 7 (32/64BITS)
The information in this article applies to:
- Chapter : - Installation
- MaxSea Version : - 12.6.4.1
- OS : - Windows 7 32/64Bits
- Update. : - June 2011
DESCRIPTION
To be able to use the MaxSea 12.6.4.1 and CM93ed 3 chart with C-Map etoken on Windows 7, you have to install
it in the correct way.
NO dongles / keys should be attached the computer during this procedure (only when this guide say so).
On the following page you will find step by step, illustrated instructions to guide you thru the process.
RESOLUTION
Turn off the User account control ............................................................................................................................ 2
Install MaxSea version 12.6.4.1 ................................................................................................................................ 3
Download and extract C_map utilities files .............................................................................................................. 3
Install eToken driver ................................................................................................................................................. 4
Install CMap RTE ....................................................................................................................................................... 4
Register and open your charts in MaxSea ................................................................................................................ 6
TURN OFF THE USER ACCOUNT CONTROL
- Click on the Windows symbol down to the
left on the screen
- Click on Control panel.
- Select « View by: Category »
- Then click on the « System and Security »
- Click on Change User Account Control
settings
- Move the slider down to the bottom (Never
notify)
- Click so on OK
- Confirm with Yes on the User control popup
- Close all the windows and restart the
computer
INSTALL MAXSEA VERSION 12.6.4.1
- Insert the CD into the CD/DVD spiller
- Select then Run setup.exe from the window Autorun that is
being displayed (If not you have to double click on the
setup.exe that is on the CD)
- Select language and then click on OK
- Click on Next in the windows Welcome to…
- Confirm the license by clicking on Yes.
- Click then on Next in the window Choose destination
- Select MapMedia (MM1/MM2), C-Map NT/MAX, Maptech
(BSB), ARCS from the window Information
- Click on the Next.
- Complete the installation process.
DOWNLOAD AND EXTRACT C_MAP UTILITIES FILES
- Download C_map drivers and utilities from MaxSea SAV
FTP by clicking the following link : ftp://ftp.maxsea.fr/PUB/DOWNLOAD/SAV/MaxSea_v12/CM93_etoken_x64_Compatib
le.zip
- Do a « Save as »
- Go to « Save as » destination folder.
- Right click on the archive
- Select « extract All… »
- Open “CM93_etoken_x64_Compatible” folder
INSTALL ETOKEN DRIVER
- Open “eToken” folder
- Double click on “PKIClient-x64-5.1-SP1.msi”
- Then Click Next to start the installation Wizard
- Select eToken language then click Next
- Accept the license agreement then click Next
- Select Destination Folder and then Next
- Then click Finish to validate the installation
INSTALL CMAP RTE
- Open “CM93_etoken_x64_Compatible” folder
- Double click on “CMapRTE.msi”
- Then Click Next to start the installation Wizard
- Select Destination Folder and then Next
- A new windows asking you to calibrate your screen will be
displayed just click OK (not used by MaxSea)
- Insert the eToken as indicated
- Click “Yes”
Note : If Windows detects the eToken Key and tries to install
drivers the cancel the Windows drivers installation.
- Click “Finish” to complete the C-Map RTE installation
REGISTER AND OPEN YOUR CHARTS IN MAXSEA
Register your CM93 database
- From file menu click on “Manage CM93ed3 & S57 Charts…”
- Click on “Databases manager…”
- From CM-93/3 Database Administrator
- Browse and select CM93_3 Installation CD
- Click on “Register Database”
- World chart should be then available in the Registered DB list
Insert your license
- From file menu click on “Manage CM93ed3 & S57 Charts…”
- Click on “License order…”
- Select Area ordered
- Enter license string
- Click on “Add License”
A dialog box should be then displayed to indicate that “License
has been added successfully” Click OK to validate.
Open your charts
- From file menu click on “Open Chart…”
- Then Select “CM93ed3/S57” and click “Open”
- If the “Measure the Screen” window appears then just click “OK”
without adjusting.