How To Connect with WiFi App1: Download TuyaSmart from App Store, or scan the below QR code to download direclty.

Add Device2: Add Manually. Open App, click Add Device.

2.1: Select Small Home ApplianceRobot Vacuum in the below picture.

2.2: Input WiFi password, only support 2.4G WiFi

2.3: Now turn on Vacuum Robot Cleaner and long press button about 3 secs, until thegreen light flashes rapidly. (0.5 secs/time)

2.4: Tick Confirm, then click Next, The App will scan available Vacuum Robot Cleaner.

2.5: Use App to control the Vacuum Robot if the connection succeeded.

3: Add device by Auto Scan (Auto Scan may take a longer time to connect. Manual add device advised.)

3.1: Make sure your phone connected to a stable WiFi network.Turn on Vacuum Robot Cleaner, long press button about 3 secs, until the green lightflashes rapidly. (0.5 secs/time).

3.2: Click Auto Scan, and start to Scanning.

3.3: Similar steps to manual add device, if connection succeeded. You can control VacuumRobot on the App.

Due to the App (Tuya) is a third-party platform and it will upgrade from time to time. The

actual App interface may be different from this manual, but the basic operation will be the

same. Thank you for your understanding.

FAQ

Q: I had connected my robot vacuum cleaner to my phone before, but I my cleaner doesn’tmove when click the App User Interface.A: Please make sure your cleaner is online, press Power button, and your vacuum robot willback online again. (In order to save the battery, the robot will be powered off if there’s no anyoperation in 5 mins.) Or check your WiFi network connection is good.