1
Output current Max. compliance voltage Current noise Current overshoot Analog modulation Current settling time (full-scale) Current setting input Current monitor TEC controller TEC current: TEC voltage: TEC setpoint: TEC stability: Laser-Fire: Supply voltage Power dissipation Dimensions in mm Weight Operating temperature 0 .. 3 A Pulse or 0.5 A cw Single laser diode < 3% 0 .. 1000 mV (3 A/V) 4.8 A/V 1.2 A -1.2 .. 0 .. 1.2 A -2.3 .. 0 .. 2.3 V Via RS232 Up to 0.001 K 500 ns TTL (retriggerable Monoflop, back-facet Monitor) 5 V DC (laser voltage) 3 5 V DC (TEC voltage) 0 to + 55 ° C < 5 % < 15 ns 12 W 65 x 85 x 15 < 400 Mhz , 25 MHz 110 g 1 2 BFS-VRM 03 HP / LP 1 2 High-Speed Seed-Driver Product Description: 1 2 3 4 BFS-VRM 03 HP. BFS-VRM 03 LP. With duty-cycles up to 1 %. Typical 3 A, guaranteed 2.5 A. Specifications measured with a fast recovery diode instead of a laser diode. Technical data is preliminary and subject to change without further notice. ! ! ! ! ! ! ! Innovative current regulation concept actively prevents laser diode from overshoots and over-current Protection against transients through regulated current rise time Over-temperature shutdown Enable/Disable input Pulser status output Laser fire monitor Protection of the laser diode against reverse currents Optional Accessories: PLCS 40 PLB-21 The BFS-VRM 03 is one of the worlds fastest analogue modulated driver for seed applications, DVD-Disk mastering, printing applications, etc. With an output current from zero to 3 A it delivers enough power to overdrive single mode diodes for short pulses. The pulse widths span from 1 ns to cw is continuously adressable via the anlaogue input signal. This wide span is world unique. Of course there are protective features and the driver is base plate cooled like all other drivers from PicoLAS. ! ! ! ! HP-version Analog modulation dc .. 400 MHz Pulse width: 1 ns .. cw LP-version Analog modulation dc .. 25 MHz Pulse width: 20 ns .. cw Output current: 0 .. 3 A 1 1 2 2 3 ! ! ! Baseplate cooling Technical Data: 4 PicoLAS GmbH Kaiserstr. 100 52134 Herzogenrath Phone: +49 (0)2407 563 58-0 [email protected] Fax: +49 (0)2407 563 58-29 www.picolas.de Rev.1503

HP-version BFS-VRM 03 HP / LP 1 2 - Startseite - PicoLASpicolas.de/wp-content/uploads/2016/11/BFS-VRM-03_datasheet_Rev1… · Output current Max. compliance voltage Current noise

  • Upload
    lekhue

  • View
    222

  • Download
    1

Embed Size (px)

Citation preview

Output currentMax. compliance voltage

Current noiseCurrent overshootAnalog modulationCurrent settling time(full-scale)Current setting inputCurrent monitor

TEC controllerTEC current:TEC voltage:TEC setpoint:TEC stability:

Laser-Fire:

Supply voltage

Power dissipationDimensions in mmWeightOperating temperature

0 .. 3 A Pulse or 0.5 A cwSingle laser diode

< 3%

0 .. 1000 mV (3 A/V)4.8 A/V

1.2 A-1.2 .. 0 .. 1.2 A-2.3 .. 0 .. 2.3 VVia RS232Up to 0.001 K

500 ns TTL (retriggerableMonoflop, back-facet Monitor)

5 V DC (laser voltage)

3

5 V DC (TEC voltage)

0 to + 55 ° C

< 5 %

< 15 ns

12 W65 x 85 x 15

< 400 Mhz , 25 MHz

110 g

1 2

BFS-VRM 03 HP / LP1 2

High-Speed Seed-Driver

Product Description:

1234

BFS-VRM 03 HP.BFS-VRM 03 LP.With duty-cycles up to 1 %. Typical 3 A, guaranteed 2.5 A.Specifications measured with a fast recovery diode instead of alaser diode. Technical data is preliminary and subject to changewithout further notice.

!

!

!

!

!

!

!

Innovative current regulation concept actively preventslaser diode from overshoots and over-currentProtection against transients through regulatedcurrent rise timeOver-temperature shutdownEnable/Disable inputPulser status outputLaser fire monitorProtection of the laser diode against reverse currents

Optional Accessories: PLCS 40

PLB-21

The BFS-VRM 03 is one of the worlds fastestanalogue modulated driver for seed applications,DVD-Disk mastering, printing applications, etc.With an output current from zero to 3 A itdelivers enough power to overdrive single modediodes for short pulses.The pulse widths span from 1 ns to cw iscontinuously adressable via the anlaogue inputsignal. This wide span is world unique.Of course there are protective features and thedriver is base plate cooled like all other driversfrom PicoLAS.

!

!

!

!

HP-versionAnalog modulation dc .. 400 MHzPulse width: 1 ns .. cw

LP-versionAnalog modulation dc .. 25 MHzPulse width: 20 ns .. cw

Output current: 0 .. 3 A

1

1

2

2

3

!

!

! Baseplate cooling

Technical Data:4

PicoLAS GmbHKaiserstr. 10052134 Herzogenrath

Phone: +49 (0)2407 563 58-0 [email protected]: +49 (0)2407 563 58-29 www.picolas.de

Rev.1503