Upload
ahmad-kibirige
View
229
Download
0
Embed Size (px)
Citation preview
8/8/2019 HP0-P20 RONNIE
1/97
HP HP0-P20
HP0-P20 HP-UX 11i v3 System Administration
Practice TestVersion 2.3
8/8/2019 HP0-P20 RONNIE
2/97
ActualTe
sts.com
QUESTION NO: 1
Click the Exhibit button.
In the exhibit, why do you see an "x" for the users in the second field of the /etc/passwd file?
A. Blank password is used.
B. Shadow password is enabled.
C. User is currently deactivated.
D. Password has expired.
Answer: B
QUESTION NO: 2
What are the main components of DNS? (Select three.)
A. Name Servers
B. Hierarchical Name Space
C. Name Clients
D. ResolversE. ARPA Name Space
F. Start of Authority (SOA)
Answer: A,B,D
QUESTION NO: 3
Which command shows the general status of a Serviceguard cluster?
A. cmclstat
B. cmshowcluster
C. cmviewcl
D. cmviewconf
E. cmgetconf
Answer: C
QUESTION NO: 4
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 2
8/8/2019 HP0-P20 RONNIE
3/97
ActualTe
sts.com
Which servers support HP-UX 11i v3? (Select two.)
A. HP9000 PA-RISC servers
B. HP ProLiant servers
C. HP Integrity servers
D. HP Integrity NonStop servers
Answer: A,C
QUESTION NO: 5
Which commands, run from the VM Host command line, can be used to turn on an Integrity Virtual
Machine? (Select two.)
A. hpvmrun -P vm1B. hpvmconsole -P vm1 start
C. hpvmconsole -P vm1 -c pc -on
D. hpvmmodify -P vm1 start
E. hpvmconsole -P vm1 -init F. hpvmstart -P vm1
Answer: C
QUESTION NO: 6
What are advantages of the Online JFS file system? (Select two.)
A. allows more files per file system
B. supports 128-bit encryption of system files
C. supports larger disk drives
D. supports online defragmentation
E. supports dynamic online resizing of the file system
Answer: D,E
QUESTION NO: 7
Click the Exhibit button.
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 3
8/8/2019 HP0-P20 RONNIE
4/97
ActualTe
sts.com
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 4
8/8/2019 HP0-P20 RONNIE
5/97
ActualTe
sts.com
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 5
8/8/2019 HP0-P20 RONNIE
6/97
ActualTe
sts.com
Using the ioscan output, which command creates a virtual partition called vpar1 with two CPUs
and 1GB memory with one valid boot path?
A. vparcreate -p vpar1 -a cpu::2 -a mem:1024 -a io:1.0.0 -a io:1/0/0/1/0/4/0.8.0:BOOTB. vparcreate -p vpar1 -a cpu::2 -a mem:1024 -a io:0.0.0 -a io:1/0/0/1/0/4/0.8.0:BOOT
C. vparcreate -p vpar1 -a cpu::2 -a mem:1024 -a io:1.0.0 -a io:1/0/1/1/0.8:ALTBOOT
D. vparcreate -p vpar1 -a cpu::2 -a mem:1024 -a io:1.0.0 -a io:1/0/1/1/0.8:BOOT
Answer: A
QUESTION NO: 8
Which VxVM command should be used to examine the volume configuration?
A. vgdisplay -v
B. vxdisplay -v
C. lvdisplay -vt
D. vxprint -hvt
Answer: D
QUESTION NO: 9
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 6
8/8/2019 HP0-P20 RONNIE
7/97
ActualTe
sts.com
Which command is used to see the attached hardware using the new agile view addressing?
A. ioscan -fnN
B. ioscan -kfC
C. scsimgr scan hardware
D. hwinfo -v
Answer: A
QUESTION NO: 10
What can be determined using the which or whence command?
A. current version and release of an executable
B. compiler options used to create an executableC. absolute path for an executable
D. pseudo terminal your session is currently logged on
Answer: C
QUESTION NO: 11
Which log file do you review to determine if the kernel module was modified on the command line?
A. /var/log/messages
B. /var/adm/syslog/syslog.log
C. /stand/vmunix.log
D. /var/adm/kc.log
Answer: D
QUESTION NO: 12
Which command is available to give you details about a command, including its options?
A. what
B. man
C. read
D. how
Answer: B
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 7
8/8/2019 HP0-P20 RONNIE
8/97
ActualTe
sts.com
QUESTION NO: 13
Which command is helpful to identify the size, owner, permissions and modification date of all files
in a directory?
A. ls -al
B. ls -ulC. lsf
D. ls -alx
Answer: A
QUESTION NO: 14
Which statements are true about multi-threading? (Select two.)
A. Multi-threaded processes are easier to program.
B. Only multi-processor systems can run multi-threaded processes.
C. Multi-threading only works for system processes, not for application processes.
D. Multi-threaded processes may run faster on multi-core systems.
E. A multi-threaded process can run on multiple CPU cores.
Answer: D,E
QUESTION NO: 15
In which shell variable is the exit code of a command stored?
A. $$
B. $?
C. $!
D. $#
E. $*
Answer: B
QUESTION NO: 16
Which configuration file is used to configure the IP address of a network interface?
A. /etc/inetd.conf
B. /etc/rc.config.d/netconf
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 8
8/8/2019 HP0-P20 RONNIE
9/97
ActualTe
sts.com
C. /etc/networking/interfaces
D. /etc/hosts
E. /etc/netconfig
Answer: B
QUESTION NO: 17
Which vPar feature is available on HP-UX 11i v3?
A. shared I/O
B. CPU percentage granularity
C. dynamic migration of memory
D. dynamic migration of I/O cards
Answer: C
QUESTION NO: 18
Which tasks does the shutdown command perform? (Select two.)
A. sends a broadcast message to all users
B. grants a 300 second grace period for users to log out
C. kills all user logins
D. quickly kills all processes
E. unmounts only non-critical file systems
Answer: A,C
QUESTION NO: 19
If most of the available memory is locked, the system may deadlock. Some nonlockable memory
must be available to prevent deadlock. Which kernel parameter determines the amount of memory
that cannot be locked?
A. dbc_min_pct
B. dbc_max_pct
C. unlockable_mem
D. free_mem_limitE. shmmax
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 9
8/8/2019 HP0-P20 RONNIE
10/97
ActualTe
sts.com
Answer: C
QUESTION NO: 20
Which files control the HP-UX System Management Homepage (SMH) configuration? (Select
two.)
A. /opt/smh/conf/envvars
B. /opt/hpsmh/lbin/envvars
C. /opt/hpsmh/hpsmh.conf
D. /opt/smh/conf/timeout.conf
E. /opt/smh/smh.conf
F. /opt/hpsmh/conf/timeout.conf
Answer: B,F
QUESTION NO: 21
Which features/functionalities does HP-UX System Management Homepage (SMH) in HPUX 11i
v3 have that SAM does not? (Select three.)
A. uses standard HP-UX commands to perform tasks
B. integrates with HP SIM
C. intuitive Terminal User Interface (TUI)
D. built-in help facility
E. Windows, Linux support
Answer: A,B,E
QUESTION NO: 22
What are key features of HP SIM without any additional plugin? (Select four.)
A. network maps
B. secure command fan-out to multiple systems
C. application management
D. automatic event handling
E. inventory reports
F. role-based access control
G. historical performance reports
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 10
8/8/2019 HP0-P20 RONNIE
11/97
ActualTe
sts.com
Answer: B,D,E,F
QUESTION NO: 23
Which tool can be used to manage multiple HP-UX servers, provide robust role-based security
and key-based authentication, and is included with HP-UX 11i v3?
A. SAM
B. SCM
C. SIM
D. SMH
Answer: C
QUESTION NO: 24
What should be used to ensure that background processes continue running after logout?
A. nohup command line& ; exit
B. nohup command line; init 1 &
C. nohup command line &; nice 10 nohup
D. command line; nohup &
Answer: A
QUESTION NO: 25
Which information does the ioscan -e command provide?
A. EFI boot options
B. EFI version
C. HP-UX and EFI address correlation
D. HP-UX version
Answer: C
QUESTION NO: 26
Which statements are true about HP-UX 11i v3 multipathing support? (Select two.)
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 11
8/8/2019 HP0-P20 RONNIE
12/97
ActualTe
sts.com
A. Native multipathing is bundled with theEnterprise and Mission Critical Operating Environments.
B. Native multipathing is bundled with all of the HP-UX Operating Environments except the
Technical Compute.
C. Native multipathing works with both legacy and persistent device special files (DSFs).
D. Native multipathing only works with persistent device special files (DSFs).
E. Native multipathing is bundled with all the HP-UX Operating Environments.
Answer: C,E
QUESTION NO: 27
Which statements are true about the new 11i v3 mass storage stack device special files (DSFs)?
(Select three.)
A. You can mix legacy and persistent DSFs.
B. You can set a flag to have legacy DSFs created for current and future storage devices.
C. Both legacy and persistent DSFs are created by default.
D. You must choose either legacy or persistent DSFs.
E. You can choose for the entire system to use only persistent DSFs.
Answer: A,C,E
QUESTION NO: 28
Which functionality is included in the Base-VxVM product? (Select two.)
A. striping
B. boot mirroring
C. dynamic multipathing support
D. RAID 5
E. dynamic relayout support
Answer: A,B
QUESTION NO: 29
Which functionalities are provided by Online JFS that are not provided by Base JFS? (Select two.)
A. online defragmentationB. fast recovery
C. online file system resizing
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 12
8/8/2019 HP0-P20 RONNIE
13/97
ActualTe
sts.com
D. intent log
E. online fsck
Answer: A,C
QUESTION NO: 30
Which command can be used to list the contents of a tar archive?
A. pax -rv < archive
B. tar rl archive
C. cpio -lv < archive
D. pax -l < archive
Answer: A
QUESTION NO: 31
Which command lists all file system paging areas with totals?
A. machinfo -v
B. swapon -l
C. lvlnboot -s
D. swapinfo -ft
Answer: D
QUESTION NO: 32
Which command configures an IP address on an HP-UX system?
A. ipconfig
B. ifconfig
C. netconfig
D. lanconfig
Answer: B
QUESTION NO: 33
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 13
8/8/2019 HP0-P20 RONNIE
14/97
ActualTe
sts.com
Which protocols are used to authenticate CIFS users on an HP-UX 11i v3 system? (Select two.)
A. Kerberos
B. Public/Private Key
C. SSH
D. NTLM
E. EAP
Answer: A,D
QUESTION NO: 34
Which Directory Server product is available for HP-UX 11i v3?
A. NIS+ ServerB. Netscape Directory Server
C. SUSE Directory Server
D. Red Hat Directory Server
Answer: D
QUESTION NO: 35
Which protocol is used by HP-UX to assign an IP address to a client host?
A. DNS
B. NIS
C. BIND
D. DHCP
Answer: D
QUESTION NO: 36
As the system administrator, you issue the following command:
# set_parms addl_netwrk
Which value can be changed in the /etc/rc.config.d/netconf?
A. subnet mask
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 14
8/8/2019 HP0-P20 RONNIE
15/97
ActualTe
sts.com
B. IP address
C. hostname
D. MAC address
Answer: A
QUESTION NO: 37
The HP-UX nwmgr command can be used to display which values?
A. neighboring host network IP addresses
B. Standard Mode Security Extensions for a network
C. performance statistics about a LAN card
D. Install-Time Security details for the network
Answer: C
QUESTION NO: 38
Which statements are true about IPFilter on HP-UX 11i v3? (Select three.)
A. It supports X.25 interfaces.
B. It is installed and enabled by default.
C. It provides extensive logs.
D. It supports Network Address Translation (NAT).
E. It can be configured with multiple rules per line.
Answer: A,C,D
QUESTION NO: 39
You have been asked to disable telnet on one of the HP-UX servers you manage. Which file
should you edit to make this change?
A. /etc/networks
B. /etc/allow
C. /etc/inetd.conf
D. /etc/telnetd
Answer: C
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 15
8/8/2019 HP0-P20 RONNIE
16/97
ActualTe
sts.com
QUESTION NO: 40
Which Operating Environment (OE) is the minimum required to use Auto Port Aggregation?
A. Base OE (BOE)
B. Virtual Server OE (VSE-OE)
C. Technical Computing OE (TCOE)D. High Availability OE (HA-OE)
E. Data Center OE (DC-OE)
Answer: A
QUESTION NO: 41
Which security tool can be used to detect an attack on HP-UX systems?
A. IPSec
B. Secure Shell (ssh)
C. NIS+
D. Host IDS
Answer: D
QUESTION NO: 42
Which file has a valid setuid bit?
-rw-r--r-S 1 root sys 8015 Apr 29 01:32 aaa
-rwSr--r-x 1 root sys 23451 Apr 29 01:32 bbb
-rw-r--r-T 1 root sys 9030 Apr 29 01:32 ccc
-rwxr-xr-x 1 root sys 12850 Apr 29 01:32 ddd
A. aaa
B. bbb
C. ccc
D. ddd
Answer: B
QUESTION NO: 43
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 16
8/8/2019 HP0-P20 RONNIE
17/97
ActualTe
sts.com
Which command identifies known security vulnerabilities on the system?
A. swa scan
B. swa ident
C. swa report
D. swa sec_chk
Answer: C
QUESTION NO: 44
After starting a preloaded system, which command can be used to set the initial system
parameters?
A. initB. set_parms
C. setparms
D. initparms
Answer: B
QUESTION NO: 45
What is the best approach to increase user password security?
A. Lock the user account after entering the password incorrectly one time.
B. Use the file /etc/default/security to define requirement of special characters, digits and upper
case characters to be used for user passwords.
C. Increase the minimal password length to 16 characters.
D. Force the users to change their password every week by configuring password aging in
/etc/default/security.
Answer: B
QUESTION NO: 46
What is the purpose of Role-Based Access Control (RBAC)? (Select two.)
A. It provides a database containing all valid definitions of all user passwords.
B. It allows non-root users to invoke commands to manage their authorization information.
C. It is an alternative to the all-or-nothing security model of traditional root user-based systems.
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 17
8/8/2019 HP0-P20 RONNIE
18/97
ActualTe
sts.com
D. It uses an LDAP-UX directory for storing definitions of user roles.
E. It allows non-root users to invoke system administration commands.
Answer: C,E
QUESTION NO: 47
Which command can you use to remove superseded patches from your system and free up
space?
A. patchremove -s level
B. swmodify -x superseded=true
C. swremove -x superseded=true
D. cleanup -c level
Answer: D
QUESTION NO: 48
Where can you find HP-UX patches, patch bundles and enhancement patches? (Select two.)
A. http://www.hp.com/go/hpux-patches
B. http://patches.hp.com/
C. http://software.hp.com/
D. http://itrc.hp.com/
E. http://www.hp-ux.hp.com/patches/
Answer: C,D
QUESTION NO: 49
How can you minimize downtime when simultaneously installing multiple patches and a reboot is
necessary?
A. Create a script to install the patches step by step.
B. Install the patches in the required order.
C. First install all prerequisite patches and filesets,then install the desired patches.
D. Create a patch depot with the patches and all prerequisite patches.
Answer: D
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 18
8/8/2019 HP0-P20 RONNIE
19/97
ActualTe
sts.com
QUESTION NO: 50
Which command is used to add a boot option that includes an Ignite server on the EFI shell?
A. dbprofile
B. lanboot
C. nbp.efiD. iuxprofile
Answer: A
QUESTION NO: 51
What are capabilities of Dynamic Root Disk (DRD)? (Select two.)
A. clones an HP-UX system image to an inactive disk
B. performs system maintenance on the clone while the HP-UX 11i system is offline
C. performs system maintenance on the clone while the HP-UX 11i system is online
D. provides synchronous mirroring of an HP-UX Root Disk
E. automatically resizes the root disk if free space falls below thresholds
Answer: A,C
QUESTION NO: 52
With regard to user account security, which files are important? (Select three.)
A. /etc/pwd
B. /etc/shadow
C. /etc/default/security
D. /etc/shadow/passwd
E. /var/adm/inetd.sec
F. /etc/passwd
G. /etc/rc.config.d/netconf
Answer: B,C,F
QUESTION NO: 53 DRAG DROP
Click Next or More to continue. Click the Task button.
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 19
8/8/2019 HP0-P20 RONNIE
20/97
ActualTe
sts.comAnswer:
Explanation:
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 20
8/8/2019 HP0-P20 RONNIE
21/97
ActualTe
sts.com
QUESTION NO: 54 DRAG DROP
Click Next or More to continue.Click the Task button.Label the HW components on the entry level
rx2660.
Answer:
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 21
8/8/2019 HP0-P20 RONNIE
22/97
ActualTe
sts.com
Explanation:
QUESTION NO: 55 DRAG DROP
Click Next or More to continue. Click the Task button. Build the LVMv1 command line to create thevolume group control file of vg01.
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 22
8/8/2019 HP0-P20 RONNIE
23/97
ActualTe
sts.com
Note: Command components need not be used or can be used multiple times.
Answer:
Explanation:
QUESTION NO: 56 DRAG DROP
Click Next or More to continue. Click the Task button. Place the basic SD-UX object types in the
correct order.
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 23
8/8/2019 HP0-P20 RONNIE
24/97
ActualTe
sts.com
Answer:
Explanation:
QUESTION NO: 57 DRAG DROP
Click Next or More to continue. Click the Task button. Match the Install-Time Security bundles with
their effects on system behavior.
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 24
8/8/2019 HP0-P20 RONNIE
25/97
ActualTe
sts.comAnswer:
Explanation:
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 25
8/8/2019 HP0-P20 RONNIE
26/97
ActualTe
sts.com
QUESTION NO: 58 DRAG DROP
Click Next or More to continue. Click the Task button. Match each Integrity server partitioning
technology with its description.
Answer:
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 26
8/8/2019 HP0-P20 RONNIE
27/97
ActualTe
sts.com
Explanation:
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 27
8/8/2019 HP0-P20 RONNIE
28/97
ActualTe
sts.com
QUESTION NO: 59
Click Next or More to continue. Click the Task button. Place the steps in the correct order to bring
a running Integrity system into single user mode.
Explanation:
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 28
8/8/2019 HP0-P20 RONNIE
29/97
ActualTe
sts.com
QUESTION NO: 60 DRAG DROP
Click Next or More to continue. Click the Task button. Place an "X" next to supported update paths
from HP-UX 11i v2 to HP-UX 11i v3 and from the original Operating Environments (OEs) to the
new OEs.
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 29
8/8/2019 HP0-P20 RONNIE
30/97
ActualTe
sts.com
Answer:
Explanation:
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 30
8/8/2019 HP0-P20 RONNIE
31/97
ActualTe
sts.com
QUESTION NO: 61 DRAG DROP
Click Next or More to continue. Click the Task button. Place the steps for updating your system
with Update-UX (terminal user interface) in the correct order.
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 31
8/8/2019 HP0-P20 RONNIE
32/97
ActualTe
sts.com
Answer:
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 32
8/8/2019 HP0-P20 RONNIE
33/97
ActualTe
sts.com
Explanation:
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 33
8/8/2019 HP0-P20 RONNIE
34/97
ActualTe
sts.com
QUESTION NO: 62 DRAG DROP
Click Next or More to continue. Click the Task button. A customer has installed Ignite C.7.x on an
rp3440 running HP-UX 11i v1. Indicate which operating systems the customer can deploy from
this Ignite server.
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 34
8/8/2019 HP0-P20 RONNIE
35/97
ActualTe
sts.com
Answer:
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 35
8/8/2019 HP0-P20 RONNIE
36/97
ActualTe
sts.com
Explanation:
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 36
8/8/2019 HP0-P20 RONNIE
37/97
ActualTe
sts.com
QUESTION NO: 63 HOTSPOT
Click Next or More to continue. Click the Task button.
Answer:
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 37
8/8/2019 HP0-P20 RONNIE
38/97
ActualTe
sts.com
Explanation:
QUESTION NO: 64
With HP-UX 11i v3, at which run level does sendmail begin delivering mail?
A. run level 1
B. run level 2
C. .run level 3
D. run level 5
Answer: B
QUESTION NO: 65
What is the purpose of the lvextend command?
A. increases the size of active swap
B. extends a logical volume across volume groups
C. increases the size of a logical volume
D. shares a logical volume with another system
Answer: C
QUESTION NO: 66
You want to create a mirror of a logical volume forcing the use of two controllers. Which
configuration file is used to accomplish this?
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 38
8/8/2019 HP0-P20 RONNIE
39/97
ActualTe
sts.com
A. /etc/lvmrc
B. /etc/dualcontroller
C. /etc/lvmtab
D. /etc/lvmpvg
Answer: D
QUESTION NO: 67
Which LVM command allows you to take advantage of dynamic LUN expansion?
A. vgmove
B. vgmodify
C. vgextend
D. vgchange
Answer: B
QUESTION NO: 68
Which command is used to identify the mapping between legacy device files and persistent device
special files (DSFs)?
A. scsimgr -m dsf
B. ioscan -map dsf
C. ioscan -m dsf
D. hwinfo -m dsf
Answer: C
QUESTION NO: 69
Which grouping demonstrates the hierarchical relationship?
A. Thread -> Program -> Shell
B. Shell -> Thread -> Program
C. Shell -> Program -> Thread
D. Program -> Shell -> Thread
Answer: C
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 39
8/8/2019 HP0-P20 RONNIE
40/97
ActualTe
sts.com
QUESTION NO: 70
You want to read the man page entry for a command that has multiple man pages in different
sections of the on-line manuals. Which command allows you to read the man pages of a specific
manual section? (Assume you want to read the passwd man page in section 4.)
A. man passwdB. man 4 passwd
C. man -k passwd
D. man passwd 4
Answer: B
QUESTION NO: 71
Which syntax redirects stderr to stdout?
A. 1>2&
B. 2>&1
C. 1&2
Answer: B
QUESTION NO: 72
Which commands copy a file to another HP-UX system? (Select three.)
A. remsh
B. ftp
C. rftp
D. login
E. rlogin
F. rcp G.scp H.cp
I.telnet
Answer: B,F
QUESTION NO: 73
What are benefits of HP-UX 11i v3 mass storage stacks when using parallel probing of HBAs,
targets, and LUNs at boot time and in response to an ioscan? (Select two.)
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 40
8/8/2019 HP0-P20 RONNIE
41/97
ActualTe
sts.com
A. improved boot time
B. improved availability
C. improved I/Oscan time
D. improved I/O performance
E. improved virtualization
Answer: A,C
QUESTION NO: 74
Which log file do you review to determine if the kernel was modified by a daemon?
A. /var/log/messages
B. /var/adm/kc.log
C. /var/adm/syslog/syslog.log
D. /stand/vmunix.log
Answer: B
QUESTION NO: 75
Which HP-UX System Management Homepage (SMH) authentication allows administrators to
monitor and manage multiple servers and devices from a central management station?
A. IP binding
B. IP restricted login
C. local/anonymous access
D. Local Server Certificate
E. Trust mode
Answer: E
QUESTION NO: 76
Which command can be used to switch the system console to the terminal where you are logged
in, thus making it the virtual system console?
A. init 0
B. init 1C. init s
D. init S
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 41
8/8/2019 HP0-P20 RONNIE
42/97
ActualTe
sts.com
E. init 2
F. init 3
Answer: D
QUESTION NO: 77
Which statement describes the configuration of HP SIM users and authorizations in an HP-UX 11i
v3 environment?
A. HP SIM authorizations are derived from the operating system login account permissions.
B. HP SIM authorizations are configured in Select Access.
C. User accounts must exist on the HP SIM central management server and authorizations are
configured within HP SIM.
D. User accounts and authorizations in HP SIM are independent of operating system accounts.
Answer: C
QUESTION NO: 78
Which bundle extends the functionality of the Sec10Host security bundle by configuring IPFilter to
block all incoming connections except common, secured, management protocols?
A. Sec10Host
B. Sec99MngDMZ
C. Sec30DMZ
D. Sec20MngDMZ
E. Sec00Tools
Answer: D
QUESTION NO: 79
Usernames in HP-UX 11i v3 can be up to 255 characters in length. Which statement is true about
this functionality?
A. It is enabled by default and the User ID must be greater than 256.
B. It is enabled by default and can be disabled at any time after installation.
C. It can be manually enabled by temporarily stopping pwgrd and executing the lugadmincommand. Once enabled, long usernames can be disabled.
D. It must be manually enabled by temporarily stopping pwgrd and executing the lugadmin
command. Once enabled, long usernames cannot be disabled.
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 42
8/8/2019 HP0-P20 RONNIE
43/97
ActualTe
sts.com
Answer: D
QUESTION NO: 80
Which command determines which device files are configured for boot, root, swap and dump?
A. vgdisplay -v vg00
B. lvlnboot -v vg00
C. lifls -v vg00
D. lvdisplay -v /dev/vgroot
Answer: B
QUESTION NO: 81
What are functionalities of the LVM included with the Base Operating Environment (BOE)?
(Select two.)
A. mirroring volumes
B. extending volumes
C. configuring RAID 5
D. load balancing across multiple disk controllers
E. dynamically changing the extent size
F. improved virtualization
Answer: B,D
QUESTION NO: 82
Which tool is used to configure VxVM volumes?
A. vea
B. VRTSexplorer
C. vxsvc
D. vxinstall
Answer: A
QUESTION NO: 83
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 43
8/8/2019 HP0-P20 RONNIE
44/97
ActualTe
sts.com
What are accurate descriptions of an inode? (Select two.)
A. is identified by a unique inode number within its parent directory
B. identifies the file system type
C. contains the file's permissions and attributes
D. is used by the kernel to find the file's data blocks
E. can be listed with the command ls -n
Answer: C,D
QUESTION NO: 84
Which command can be used to duplicate a disk?
A. tarB. dd
C. fbackup
D. cpio
Answer: B
QUESTION NO: 85
You need to add a new local printer to your system. The printer is an HP LaserJet using device file
/dev/lp. The name of the print queue will be my_lj. Which command should you use?
A. lpcreate -l -pmy_lj -v/dev/lp -sdisable
B. lpr -add -g7 -pmy_lj -mlaserjet -v/dev/lp
C. lpadd -pmy_lj -mdumb -v/dev/lp
D. lpadmin -pmy_lj -v/dev/lp -mlaserjet
Answer: D
QUESTION NO: 86
How is an "alias" IP address used?
A. It is another (secondary) host using your host address.
B. It is a short form of the IP address used to simplify connections.
C. It is an additional IP address on a single NIC.
D. It is a duplicate (identical) address configured on two separate NICs on the same system.
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 44
8/8/2019 HP0-P20 RONNIE
45/97
ActualTe
sts.com
Answer: C
QUESTION NO: 87
Which function does the HP-UX CIFS Client provide?
A. mounts Windows file systems on an HP-UX system
B. mountsWindows CIFS-formatted disks on an HP-UX system
C. shares HP-UX CIFS formatted disks with Windows clients
D. shares HP-UXfile systems with Windows clients
Answer: A
QUESTION NO: 88
What is the default protocol version for NFS running on HP-UX 11i v3?
A. 1
B. 2
C. 3
D. 4
Answer: C
QUESTION NO: 89
In which file should you set the DHCP_ENABLE variable to '1' to allow a client to use DHCP on
boot?
A. /etc/nsswitch.conf
B. /etc/hosts
C. /etc/rc.config.d/netconf
D. /etc/rc.config.d/dhcp.conf
Answer: C
QUESTION NO: 90
If you run the set_parms command without any options and do not get prompted for the IP
address, what could be the reason?
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 45
8/8/2019 HP0-P20 RONNIE
46/97
ActualTe
sts.com
A. Thereare no additional network cards that need to be configured.
B. The /etc/rc.config.d/netconf file is missing or corrupted.
C. The ip_address option was not given when the command was issued.
D. There is no networking installed on the system.
Answer: D
QUESTION NO: 91
Which information can be displayed using the ndd command?
A. IP forwarding parameters
B. network daemon details
C. network domain daemon
D. IP addresses used on the host
Answer: A
QUESTION NO: 92
Which file can be used to define client access to network services?
A. /etc/services
B. /etc/inetd.conf
C. /etc/access.conf
D. /etc/network
Answer: A
QUESTION NO: 93
Which file is involved in the configuration and operation of the default Apache software for HP-UX
11i v3?
A. /etc/http/conf/http.conf
B. /etc/apache.conf
C. /opt/hpws/apache/conf/httpd.conf
D. /etc/rc.config.d/apache.conf
Answer: C
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 46
8/8/2019 HP0-P20 RONNIE
47/97
ActualTe
sts.com
QUESTION NO: 94
Which Operating Environments (OEs) include MirrorDisk/UX by default? (Select three.)
A. Base OE (BOE)
B. Foundation OE (FOE)
C. Virtual Server OE (VSE-OE)D. Data Center Operating Environment (DC-OE)
E. High Availability OE (HA-OE)
F. Technical Computing OE (TCOE)
Answer: C,D,E
QUESTION NO: 95
Which current Operating Environment (OE) includes Serviceguard on HP-UX 11i v3?
A. Enterprise OE (EOE)
B. Virtual Server OE (VSE-OE)
C. High Availability OE (HA-OE)
D. Base OE (BOE)
Answer: C
QUESTION NO: 96
Which information is delivered by running the msv2v3check script prior to an upgrade from 11i v2
to 11i v3?
A. if any unsupported firmware, network cards and third-party applications are found
B. exactly which host bus adapters and storage devices you have to check the Support Matrix
C. if any unsupported drivers, mass storage I/O cards and mass storage devices are found
D. exactly which system, processor and chipset you have to check the HP-UX Server Support
Matrix
Answer: C
QUESTION NO: 97
What are default configuration files for HP-UX Software Assistant? (Select two.)
A. /etc/swa.conf
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 47
8/8/2019 HP0-P20 RONNIE
48/97
ActualTe
sts.com
B. /etc/opt/swa/swa.cfg
C. /var/opt/swa/swa.conf
D. $HOME/.swa.conf
E. /etc/opt/swa/swa.conf
Answer: D,E
QUESTION NO: 98
Which utilities are provided by SD-UX? (Select three.)
A. swinstall
B. swsetup
C. swremove
D. swdelete
E. swmove
F. swcopy
G. swcheck
Answer: A,C,F
QUESTION NO: 99
Why does HP release patches? (Select three.)
A. to add new functionality
B. toimplement customer needs
C. to fix bugs
D. to add new hardware support
E. toremove unneeded software packages
F. to check the license state of installed applications
Answer: A,C,D
QUESTION NO: 100
Which command is used to install patches from a depot or patch bundle without interaction?
A. swinstall -s source -x reboot=true -x match_target=trueB. swinstall -s source -x autoreboot=true -x match_what_target_has=true
C. swinstall -s source -x autoreboot=true -x patch_match_target=true
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 48
8/8/2019 HP0-P20 RONNIE
49/97
ActualTe
sts.com
D. swinstall -s source -x reboot=true -x patch_match_target=true
Answer: C
QUESTION NO: 101
Issuing the command make_tape_recovery -s will create a recovery archive. What is included in
this archive? (Select two.)
A. a boot image to bring up the system again
B. an archive of all files and directories contained in the file systems in vg00
C. LVM configuration information for the root volume group
D. all customized configuration files needed to rebuild the system
E. a bootable client of Data Protector to recover all lost files from the backup server
Answer: A,C
QUESTION NO: 102
Which command is used to maintain the Ignite-UX configuration files?
A. save_config
B. instl_adm
C. make_config
D. auto_adm
Answer: B
QUESTION NO: 103
Click the Exhibit button.
Given the information provided in the exhibit, which statements are true? (Select three.)
The image is missing.
A. There is a user name 21001 or there is no entry for the user 21001 in the /etc/passwd file.
B. Users in the group users can remove the directory SG.
C. Every user on the system can execute the file active_path.sh.D. Every user on the system can modify the file act.zone.
E. The user jdoe can list files in the directory QPKs.bak.
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 49
8/8/2019 HP0-P20 RONNIE
50/97
ActualTe
sts.com
F. The user jdoe can create files in the directory Mycust.
Answer: A,C,E
QUESTION NO: 104
In which location are security restrictions (like a password policy or allowed login times for a single
user) stored using the Standard Mode Security Extension (SMSE)?
A. /etc/default/security
B. /tcb/files/auth
C. /var/adm/userdb
D. /etc/shadow
Answer: C
QUESTION NO: 105
Click the Exhibit button.
Given the information provided in the exhibit, which statements are true? (Select two.)
The image is missing.
A. Users must use at least one special character in their passwords.
B. Users must use lower case characters in their passwords.
C. Users must change their passwords every 14 days. D.Usersare not warned before their
passwords expire.
E.Users must use at least one upper case character in their passwords.
F.Users are allowed to log in only one time.
Answer: B
QUESTION NO: 106
From a security perspective, what should you do to connect to a system without being asked for a
password?
A. Use the .shosts file.
B. Use the public/private key of SecureShell.
C. Use the .rhosts file.D. Use telnet and a user without a password.
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 50
8/8/2019 HP0-P20 RONNIE
51/97
ActualTe
sts.com
Answer: B
QUESTION NO: 107
What is PAM used for?
A. to authorize user access
B. to perform an auditing service
C. to authenticate user access
D. to protect auditing services
Answer: C
QUESTION NO: 108
Which command determines if a local user account has been locked?
A. acctstat
B. passwd -l
C. userdbstat
D. userstat
Answer: D
QUESTION NO: 109
On which type of server hardware are vPars versions 4.x and 5.x supported?
A. processor-based servers
B. virtual machines
C. cell-based servers
D. ProLiant servers
Answer: C
QUESTION NO: 110
You have connected to an HP Virtual Machine's (HPVM) console, while logged in at the VM Host
MP console. Which command sequence must be given to drop out of the HPVM console, leaving
you at the vMP prompt?
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 51
8/8/2019 HP0-P20 RONNIE
52/97
ActualTe
sts.com
A. ^Z
B. ^A
C. ^B
D. ^X
Answer: D
QUESTION NO: 111
PRM is software in an HP-UX instance that allows you to create a partitioning scheme that is
based on which items?
A. CPU, Network, and Disk Space groups
B. Cell, Memory, and Application groups
C. CPU, Memory, Disk I/O, Application, and User groups
D. Disk I/O, Network, and Process Thread groups
Answer: C
QUESTION NO: 112
While starting a Serviceguard cluster, one node is not available to join due to a failure. Which
command can you use to start the cluster with the remaining nodes?
A. cmrunnode -n node1 ... -n nodex
B. cmmodnode -n nodex
C. cmruncluster -n node1 ...-n nodex
D. cmruncl -n node1 ... -n nodex
E. cmruncl -v
Answer: D
QUESTION NO: 113
What does the linkloop command test?
A. router activity
B. Maximum Transmission Unit (MTU) size
C. MAC address connectivity between network cardsD. loopback address connectivity between network cards
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 52
8/8/2019 HP0-P20 RONNIE
53/97
ActualTe
sts.com
Answer: C
QUESTION NO: 114
Which file contains the information sent in response to a bootp request?
A. /etc/services
B. /etc/bootptab
C. /etc/in etd.conf
D. /etc/bootp.conf
Answer: B
QUESTION NO: 115
Which commands can confirm host name resolution (DNS/Bind) is working correctly?
A. whois
B. uname
C. nsquery
D. hostname
E. gethostbyname
Answer: C
QUESTION NO: 116
What is IP multiplexing on a UNIX host?
A. increasing throughput on the network interface
B. binding the same IP address to multiple network interface
C. binding more than one IP address to a single network interface
D. binding more than one MAC address to a single network interface
Answer: C
QUESTION NO: 117
Which tools have been deprecated with the introduction of the nwmgr command? (Select three)
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 53
8/8/2019 HP0-P20 RONNIE
54/97
ActualTe
sts.com
A. netstat
B. ifconfig
C. linkloop
D. lanscan
E. lanadmin
Answer: C,D,E
QUESTION NO: 118
How can you enable only NFS version 4 support on HP-UX 11 i v3?
A. HP-UX v3 does not support NFSv4.
B. Change the NFSv4 kernel parameter to yes, recompile the kernel and reboot.
C. Using only NFSv4 is not supported; NFSv2 and NFSv3 are always enabled.
D. Set the configuration parameters NFS_SERVER_VERSMIN and NFS_SERVER_VERSMAX to
4.
Answer: D
QUESTION NO: 119
Which NFS server file contains a list of clients that currently have the server's NFS file systems
mounted?
A. /etc/fstab
B. /etc/rmtab
C. /etc/nfstab
D. /etc/mnttab
E. /etc/exports
Answer: B
QUESTION NO: 120
What is the length of an IPv4 address?
A. 32 bits
B. 48 bitsC. 64 bits
D. 128 bits
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 54
8/8/2019 HP0-P20 RONNIE
55/97
ActualTe
sts.com
Answer: A
QUESTION NO: 121
Which command displays Internet to Ethernet address resolution?
A. arp
B. lanscan
C. ifconfig
D. traceroute
Answer: A
QUESTION NO: 122
What are the new features offered in NFS version 4? (Select three.)
A. integrated security
B. asynchronous write support
C. integrated file locking support
D. simplified firewall configuration
E. support for the UDP network transport
Answer: A,C,D
QUESTION NO: 123
Which feature of HP CIFS allows a Unix uid or gid to be mapped to a Windows account or group?
A. nmbd
B. smbd
C. winbind
D. smbclient
Answer: C
QUESTION NO: 124 DRAG DROP
Click the Task button.
Using drag and drop, match each network configuration file with its common definition.
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 55
8/8/2019 HP0-P20 RONNIE
56/97
ActualTe
sts.com
Drag and drop question. Drag the items to the proper locations.
Answer:
Explanation:
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 56
8/8/2019 HP0-P20 RONNIE
57/97
ActualTe
sts.com
QUESTION NO: 125
Which file contains the modified configuration values that will be used the next time the cimserver
starts?
A. cimserver.conf
B. cimserver_start.conf
C. cimserver_planned.confD. cimserver_nextboot.conf
Answer: C
QUESTION NO: 126
Which pair of statements is true when launching a tool using HP System Insight Manager (HP
SIM)?
A. - authorizations are configured in HP SIM
- users are authenticated using PAM on the HP SIM Server
B. - authorizations are configured in HP SIM
- users are authenticated using HP SIM's internal user database
C. - authorizations are configured in Select Access
- users are authenticated using HP SIM's internal user database
D. - authorizations are derived from operating system login account permissions
- users are authenticated using PAM on the HP SIM Server
Answer: A
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 57
8/8/2019 HP0-P20 RONNIE
58/97
ActualTe
sts.com
QUESTION NO: 127
What does the pvcreate command create?
A. a hard partitionB. the physical links
C. a physical volume device file
D. the Ivm disk resident structures
Answer: D
QUESTION NO: 128
The HP-UX System Management Homepage is started using which URL?
A. http://hostname
B. http://hostname:80
C. http://hostname:2301
D. http://hostname/hpsmh
Answer: C
QUESTION NO: 129
Which areas can be locations of system bottlenecks? (Select three.)
A. disk
B. cpu
C. VPMON
D. memory
E. hard partition size
F. graphical interface
G. size of filesystems
Answer: A,B,D
QUESTION NO: 130
Which commands are recommended to clear the contents an active file called log-file? (Select
two.)
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 58
8/8/2019 HP0-P20 RONNIE
59/97
ActualTe
sts.com
A. >log-file
B. trim log-file "
C. freset log-file
D. cat /dev/null > log-file
Answer: A,D
QUESTION NO: 131
Where are system startup/shutdown scripts located?
A. /etc/rc2.d
B. /sbin/init.d
C. /sbin/config.d
D. /etc/rc.config.d
Answer: B
QUESTION NO: 132 DRAG DROP
Click the Task button.
Using drag and drop, match each backup/archive tool with its operation.
Drag and drop question. Drag the items to the proper locations.
Answer:
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 59
8/8/2019 HP0-P20 RONNIE
60/97
ActualTe
sts.com
Explanation:
QUESTION NO: 133
What are benefits of the HP-UX 11i v3 parallel probing of HBAs, targets, and LUNs? (Select two.)
A. improved boot time
B. improved availability
C. improved virtualization
D. improved I/O scan time
E. improved I/O performance
Answer: A,D
QUESTION NO: 134
How do you change a volume group name without reloading the data?
A. It is not possible.
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 60
8/8/2019 HP0-P20 RONNIE
61/97
ActualTe
sts.com
B. vgchange
C. vgexport, mkdir, mknod, vgimport
D. vgremove, mkdir, mknod, vgcreate
Answer: C
QUESTION NO: 135
How do you remove a virtual partition?
A. from the vPar monitor: MON>VPARREMOVE -p
B. from the MP: CM>VPARDELETE and select the name of the vParfrom the list
C. execute vparstatus, then verify the vPar is down using vparremove -p
D. bring down all the vPar kernels made from the same nPar and reboot the kernel into the nPar
Answer: C
QUESTION NO: 136
If ioscan shows no device files for a claimed hardware path, which command can be used to
recreate them?
A. Issf
B. reboot
C. insf-e
D. /sbin/ioinitrc
Answer: C
QUESTION NO: 137
Which feature is new to 11 i v3 and is only available on Integrity servers?
A. NUMA
B. ccNUMA
C. concurrent dumps
D. single CPU per socket
Answer: C
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 61
8/8/2019 HP0-P20 RONNIE
62/97
ActualTe
sts.com
QUESTION NO: 138
Which file systems are included with the HP-UX Foundation Operating Environment (OE)? (Select
two.)
A. ext3
B. hfsC. VxVM
D. memfs
E. BaseJFS
F. Online JFS
Answer: B,E
QUESTION NO: 139
You want to create a mirror of a logical volume using two controllers. Which configuration file is
used to accomplish this?
A. /etc/lvmrc
B. /etc/lvmtab
C. /etc/lvmpvg
D. /etc/dualcontroller
Answer: C
QUESTION NO: 140
Which HW components are always found in an HP Integrity processor-based system? (Select
three.)
A. core I/O
B. cell boards
C. ltanium2CPU
D. PCI I/O cards
E. PA 8900 CPU
F. HP-PB I/O cards
Answer: A,C,D
QUESTION NO: 141
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 62
8/8/2019 HP0-P20 RONNIE
63/97
ActualTe
sts.com
Which HP-UX 11 i v3 command allows SCSI device management and diagnoses?
A. ioinit
B. iofind
C. scsiutil
D. scsimgr
Answer: D
QUESTION NO: 142
Which are structures inside a journal file system? (Select two.)
A. mcells
B. intent logC. fragment
D. inode table
E. cylinder group
Answer: B,D
QUESTION NO: 143
HP-UX typically has multiple file systems configured. What is an advantage single HP-UX system?
A. enables the creation of very large files
B. required for a demand paging system
C. helps to avoid excessive file fragmentation
D. allows each file system to be tuned separately
Answer: D
QUESTION NO: 144
What do physical volume links provide in HP-UX 11i v2?
A. access to a spare disk
B. automatic load balancing
C. an alternate path to a disk
D. improved RAID performance
Answer: C
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 63
8/8/2019 HP0-P20 RONNIE
64/97
ActualTe
sts.com
QUESTION NO: 145
Which command determines which device files are configured for boot, root, swap and dump?
A. lifls-vvg00B. Ivlnboot-v vg00
C. vgdisplay-v vg00
D. Ivdisplay -v /dev/vgroot
Answer: B
QUESTION NO: 146
What is the purpose of the extendfs command?
A. increases the size of active swap
B. increases the size of a logical volume
C. extends a file system within a logical volume
D. shares a logical volume with another system
E. extends a logical volume across volume groups
Answer: C
QUESTION NO: 147
Which symbol is used to append error messages to a file in the POSIX shell?
A. 2>
B. >>2
C. 2>
Answer: D
QUESTION NO: 148
How do you search through all man pages for a command?
A. man -c keyword
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 64
8/8/2019 HP0-P20 RONNIE
65/97
ActualTe
sts.com
B. man -k keyword
C. man -s keyword
D. man -v keyword
Answer: B
QUESTION NO: 149
What can be determined using the file command?
A. type of file selected
B. absolute path for an executable
C. compiler options used to create an executable
D. pseudo terminal your session is currently logged on
Answer: A
QUESTION NO: 150
Which command makes additional crontab entries?
A. cron-a
B. crontab-e
C. vi /etc/crontab
D. /usr/sbin/cron -e
Answer: B
QUESTION NO: 151
What does a hard link between two files do?
A. allows two users to own the same file
B. ensures that two files get deleted together
C. allows multiple file names to reference the same data in a filesystem
D. allows multiple file names to reference the same data across two filesystems
Answer: C
QUESTION NO: 152 CORRECT TEXT
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 65
8/8/2019 HP0-P20 RONNIE
66/97
ActualTe
sts.com
Click the Task button.
Using point and click, identify the User ID field in the /etc/passwd file shown in the graphic.
Click on the correct location or locations in the exhibit.
Answer:
QUESTION NO: 153
Which command does root use to send an instant message to all users?
A. wall
B. talk
C. send
D. write
Answer: A
QUESTION NO: 154
What does find /-name datafile return?
A. path names of all files called datafile
B. number of files called datafile in your current directory
C. relative path of files called datafile from your current directory down
D. relative path names of all files called datafile in your current directory
Answer: A
QUESTION NO: 155
Which command can be used to verify a network interface card (NIC) is enabled?
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 66
8/8/2019 HP0-P20 RONNIE
67/97
ActualTe
sts.com
A. arp
B. ping
C. lanscan
D. nslookup
Answer: C
QUESTION NO: 156
What does the command touch myfile do if myfile exists?
A. nothing
B. gives an error
C. sets the file size to zero
D. updates the date/time stamp
Answer: D
QUESTION NO: 157
Information about the currently installed software for the local system is stored in which location?
A. /var/adm/sw/depot
B. A/ar/adm/sw/products
C. /var/adm/sw/filesets
D. /var/adm/sw/swinstall.log
Answer: B
QUESTION NO: 158
How do you determine which patches are currently installed on the system?
A. check_patches
B. swlist -I product | grep -i ph
C. swlist -I depot | grep -i ph
D. swlist -I product | grep -i patch
Answer: B
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 67
8/8/2019 HP0-P20 RONNIE
68/97
ActualTe
sts.com
QUESTION NO: 159
What is the smallest component that you can install with swinstall?
A. file
B. fileset
C. productD. sub-product
Answer: B
QUESTION NO: 160
Which file transfer protocols are used by an Ignite server? (Select two.)
A. nfs
B. rep
C. scp
D. tftp
E. cifs
Answer: A,D
QUESTION NO: 161
Which HP Role-Based Access Control (RBAC) command allows a user to execute a program
under a different user id?
A. exec
B. sudo
C. runas
D. privrun
Answer: D
QUESTION NO: 162
Which file configures PAM (Pluggable Authentication Module)?
A. /etc/pam.conf
B. /sbin/init.d/pam
C. /opt/PAM/pam.conf
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 68
8/8/2019 HP0-P20 RONNIE
69/97
ActualTe
sts.com
D. /etc/rc.config.d/pam
Answer: A
QUESTION NO: 163
Which security features are available on 11 i v2 and not available on 11i v1? (Select three.)
A. IPSec
B. Bastille
C. LDAP-UX
D. Install-time Security
E. Security Containment
F. Encypted Volume and File System
Answer: D,E,F
QUESTION NO: 164
What is the default umask value for a non-root user?
A. 022
B. 200
C. 440
D. 644
Answer: A
QUESTION NO: 165
The anonymous user (nobody) is pre-configured on HP-UX to have which user ID?
A. 0
B. 2
C. -2
D. 65534
E. -65534
Answer: C
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 69
8/8/2019 HP0-P20 RONNIE
70/97
ActualTe
sts.com
QUESTION NO: 166
Which statement is true about a Virtual Private Network (VPN)?
A. It is only used behind a firewall.
B. It is a very fast dedicated network.
C. It allows for clear text transmission.D. It is an encrypted stream over a public network.
Answer: D
QUESTION NO: 167
Which command compares the current state of the system to a saved Bastille baseline?
A. bastille_diff
B. bastille_drift
C. bastille_verify
D. bastille_compare
Answer: B
QUESTION NO: 168
Which benefit does PV-Links provide?
A. multiple paths to the same U\N card
B. multiple paths to the same physical disk
C. symbolic link to the same physical device
D. multiple physical disks combined into a volume group
Answer: B
QUESTION NO: 169
Which I/O bus technology is supported on Integrity based systems?
A. PCI
B. EISA
C. HSC
D. EIDE
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 70
8/8/2019 HP0-P20 RONNIE
71/97
ActualTe
sts.com
Answer: A
QUESTION NO: 170
Which file system component contains information describing file attributes?
A. inode
B. intent log
C. superblock
D. journal cache
Answer: A
QUESTION NO: 171
Which command can be used to show all physical volumes in a volume group?
A. vgdisplay
B. pvdisplay
C. Ivdisplay
D. Ivmdisplay
Answer: A
QUESTION NO: 172
What is a use of the intent log in a journaled file system?
A. logmeta data changes
B. provide an audit trail log
C. track mirror transactions
D. improve buffer cache performance
E. log user data prior to a physical write
Answer: A
QUESTION NO: 173
Which new features of HP-UX 11 i v3 potentially increase the overall I/O performance compared to
previous releases of HP-UX 11i? (Select two.)
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 71
8/8/2019 HP0-P20 RONNIE
72/97
8/8/2019 HP0-P20 RONNIE
73/97
ActualTe
sts.com
Answer: D
QUESTION NO: 177
Which technology does the Intel Itanium2 processor use?
A. Complex Instruction Set Computing
B. Reduced Instruction Set Computing
C. Explicity Parallel Instruction Computing
D. Super Scalar Reduced Instruction Computing
Answer: C
QUESTION NO: 178 DRAG DROP
Click the Task button.
Using drag and drop, match each partitioning technology with the correct description.
Answer:
Explanation:
Drag and drop question. Drag the items to the proper locations
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 73
8/8/2019 HP0-P20 RONNIE
74/97
ActualTe
sts.com
QUESTION NO: 179
What is the function of the HP CIFS Server?
A. to share HP-UXfile systems with Windows clients
B. tomount Windows file systems on an HP-UX system
C. to share HP-UX CIFS-formatted disks with Windows clients
D. tomount Windows CIFS-formatted disks on an HP-UX system
Answer: A
QUESTION NO: 180
What are the new features of BIND 9.3.2? (Select three.)
A. integration with IPFilter
B. storing of IPv6 addresses
C. support for new DNSSEC features
D. new method of listing master servers
E. configure the ordering of records in a multi-record response
Answer: C,D,E
QUESTION NO: 181
Which Directory Server products are available for HP-UX 11i v3? (Select two.)
A. NIS Server
B. NIS+Server
C. LDAP-UX IntegrationD. SuSe Directory Server
E. Red Hat Directory Server
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 74
8/8/2019 HP0-P20 RONNIE
75/97
ActualTe
sts.com
Answer: A,E
QUESTION NO: 182
Which network transport protocol is supported by NFS version 4?
A. rtp
B. tcp
C. ntp
D. udp
Answer: B
QUESTION NO: 183
Which command displays the IP address to hardware address translation table?
A. arp
B. netstat
C. linkloop
D. lanscan
E. nslookup
Answer: A
QUESTION NO: 184
Which file is used during network startup to identify the network interface name, IPv4 address, and
subnet mask of your U\N card?
A. netconf
B. nfsconf
C. auditing
D. swconfig
Answer: A
QUESTION NO: 185
Which configuration file determines the synchronization sources and operating modes of NTP?
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 75
8/8/2019 HP0-P20 RONNIE
76/97
ActualTe
sts.com
A. /etc/xntpd
B. /etc/ntp.conf
C. /etc/rc.config.d/ntpconf
D. /etc/rc.config.d/netdaemons
Answer: B
QUESTION NO: 186
On an NFS server, which commands can you use to determine which clients have mounted
exported file systems? (Select two.)
A. mount -v
B. showmount-a
C. more /etc/rmtab
D. more /etc/nfstab
E. more /etc/mounts
Answer: B,C
QUESTION NO: 187
Which command is used to verify remote host connectivity?
A. inet
B. ping
C. netstat
D. portmap
Answer: B
QUESTION NO: 188
Which HP service and support tool is offered free-of-charge and provides proactive event
notification to HP in case of failure of HP-UX servers?
A. Support Tools Manager
B. Event Monitoring Service
C. Instant SupportEnterprise EditionD. HP Online Diagnostics Environment
E. HP Offline Diagnostics Environment
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 76
8/8/2019 HP0-P20 RONNIE
77/97
ActualTe
sts.com
Answer: C
QUESTION NO: 189
Which Ignite command makes a recovery tape of all files in vgOO?
A. make_net_recovery -xinc=/dev/vgOO -d /dev/rmt/1 mn
B. make_tape_recovery -x inc_vgOO=all -a /dev/rmt/1 mn
C. make_recovery -x inc_entire=/dev/vgOO -a /dev/rmt/1 mn
D. make_tape_recovery -x inc_entire=/dev/VgOO -a /dev/rmt/1 mn
Answer: D
QUESTION NO: 190
A customer wants to migrate to HP-UX 11 i v3. The customer has several HP 9000 and Integrity
systems to test on. Which options or systems will support HP-UX 11i v3? (Select two.)
A. L3000 currently running HP-UX 11 i v2
B. BL60p currently running HP-UX 11 i v2
C. rp3410 currently running HP-UX 11 i v2
D. vPar (version A.03.X) on HP 9000 Superdome running HP-UX 11 i v1
Answer: B,C
QUESTION NO: 191 DRAG DROP
Click on the Task button.
Using drag and drop, match the commands with the functions performed.
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 77
8/8/2019 HP0-P20 RONNIE
78/97
ActualTe
sts.com
Drag and drop question. Drag the item to the proper location.
Answer:
Explanation:
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 78
8/8/2019 HP0-P20 RONNIE
79/97
ActualTe
sts.com
QUESTION NO: 192
Which operator will start a process in the background?
A. ;B. ||
C. &
D. |&
E. SS
Answer: C
QUESTION NO: 193
Which statements are true regarding threads and processes? (Select two.)
A. A thread is a component of a process
B. A process is a component of a thread.
C. Threads and processes have nothing to do with each other.
D. A thread forces the entire process to run on a single set of resources.
E. A process is a container for a set of instructions that carry out a task of the program.
Answer: A,E
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 79
8/8/2019 HP0-P20 RONNIE
80/97
ActualTe
sts.com
QUESTION NO: 194
Which environmental variable allows you to override the default directories searched for man
pages?
A. PATH
B. PATHVIC. MANPATH
D. MANPAGE
QUESTION NO: 195
Which command can you use to terminate a process?
A. killB. stop
C. abort
D. signal
E. terminate
Answer: A
QUESTION NO: 196
Which sftp command allows a user to copy the contents of an entire directory?
A. get
B. rep
C. mget
D. getall
E. mpull
Answer: C
QUESTION NO: 197
Which statement describes the configuration of HP System Insight Manager (HP SIM) users and
authorizations?
A. HP SIM authorizations are configured in Select Access.
B. HP SIM authorizations are derived from the operating system login account permissions.
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 80
8/8/2019 HP0-P20 RONNIE
81/97
ActualTe
sts.com
C. User accounts and authorizations in HP SIM are independent of operating system accounts.
D. User accounts must exist on the HP SIM central management server and authorizations are
configured within HP SIM.
Answer: D
QUESTION NO: 198 DRAG DROP
Click the Task button.
Using drag and drop, match the process or daemon name with the correct definition.
Drag and drop question. Drag the items to the proper locations.
Answer:
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 81
8/8/2019 HP0-P20 RONNIE
82/97
ActualTe
sts.com
QUESTION NO: 199 DRAG DROP
Click the Task button.
Using drag and drop, match each command with the corresponding description.
Drag and drop question. Drag the items to the proper locations.
Answer:
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 82
8/8/2019 HP0-P20 RONNIE
83/97
8/8/2019 HP0-P20 RONNIE
84/97
ActualTe
sts.com
C. umount, Ivextend, fsadm
D. umount, Ivextend, extendfs
Answer: A
QUESTION NO: 203
By default, where does the cpio command send its output?
A. /tmp
B. stdout
C. stderr
D. cpio.out
Answer: B
QUESTION NO: 204
How do you add 16GB of memory to a vPar?
A. from the vPar monitor: MON> vparmodify -p # -a mem:16Gb
B. from the MP: CM>VPARMOD .select the vPar name from the list, then select Add Memory and
type 16G
C. from the HP-UX command line: execute vparremove -p and recreate the vPar
with the desired amount of memory
D. from the HP-UX command line: execute vparstatus to determine the vPar is down,then execute
vparmodify -p -a mem::16348
Answer: D
QUESTION NO: 205
Which commands should be used to monitor disk I/O statistics? (Select two.)
A. sar
B - top
C - iostat
D. netstat
E. linkloop
Answer: A
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 84
8/8/2019 HP0-P20 RONNIE
85/97
ActualTe
sts.com
QUESTION NO: 206
Which command displays active shared memory segments?
A. ipcsB. mstat
C. vmstat
D. strings /dev/kmem
Answer: A
QUESTION NO: 207
Which Pluggable Authentication Module (PAM) restricts login access for a set of users?
A. pam_unix
B. pam_hpux
C. pam_authz
D. pam_access
E. pam_validate
Answer: C
QUESTION NO: 208
What is a benefit of Secure Shell?
A. increase security of POSIX shell
B. prevents denial of service attacks
C. authentication through hidden identity
D. privacy of data through strong encryption
Answer: D
QUESTION NO: 209
What does the file /var/adm/inetd.sec do?
A. controls access to kernel subsystems
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 85
8/8/2019 HP0-P20 RONNIE
86/97
ActualTe
sts.com
B. stores internet security services history
C. specifies extra security for anonymous ftp users
D. provides an extra layer of security for HP-UX systems
Answer: D
QUESTION NO: 210
Which statements are true for a LVM logical volume? (Select two.)
A. It is not a file system.
B. It may contain a file system.
C. You can have one logical volume per volume group.
D. A logical volume contains one or more volume groups.
Answer: A,B
QUESTION NO: 211
Which LVM command allows dynamic size expansion of LUNs?
A. vgmove
B. vgmodify
C. vgextend
D. vgchange
Answer: B
QUESTION NO: 212
What is the purpose of the Ivextend command?
A. extends a file system within a logical volume
B. increases the size of active swap
C. extends a logical volume across volume groups
D. increases the size of a logical volume
E. shares a logical volume with another system
Answer: D
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 86
8/8/2019 HP0-P20 RONNIE
87/97
ActualTe
sts.com
QUESTION NO: 213
Which users are included in the /etc/ftpd/ftpusers file?
A. those allowed ftp access
B. those not allowed ftp access
C. those allowed anonymous ftp accessD. those allowed ftp access without a password
Answer: B
QUESTION NO: 214
Which file contains information about unsuccessful login attempts?
A. /etc/wtmp
B. /var/adm/btmps
C. /var/adm/utmps
D. /var/syslog/failed_logins
Answer: B
QUESTION NO: 215
Which command determines if a local user account has been locked?
A. acctstat
B. userstat
C. passwd-l
D. userdbstat
Answer: B
QUESTION NO: 216
What is PAM (Pluggable Authentication Module) used for?
A. to tell each service which authentication module to use
B. to indicate which service can run in a nonsecure mode
C. to enable the ftp service with pluggable module encryption
D. to encrypt and authenticate IP packets at the network layer
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 87
8/8/2019 HP0-P20 RONNIE
88/97
ActualTe
sts.com
Answer: A
QUESTION NO: 217
What are benefits of Encrypted Volume and File System? (Select two.)
A. protects data at rest
B. protects data in use C. encrypts any mounted filesystem
D. works with any supported volume manager
E. provides additional file system access control
Answer: A
QUESTION NO: 218
What is the result when a user enters the telnet command without arguments?
A. An error is returned.
B. Telnet enters command mode.
C. The system connects to its loopback address.
D. The system connects to the last known system address.
Answer: B
QUESTION NO: 219
In which order are cron.allow and cron.deny evaluated on an HP-UX system when both files exist?
A. first cron.allow then cron.deny
B. first cron.deny then cron.allow
C. only cron.allow; cron.deny is ignored
D. only cron.deny; cron.allow is ignored
Answer: C
QUESTION NO: 220 DRAG DROP
Click the Task button.
Using drag and drop, arrange the steps in sequence to create a file system.
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 88
8/8/2019 HP0-P20 RONNIE
89/97
ActualTe
sts.com
Drag and drop question. Drag the items to the proper locations.
Answer:
QUESTION NO: 221
How is the priority of a child process assigned?
A. assigned randomly
B. inherited from the parent process
C. assigned the next lowest available priority
D. assigned the next highest available priority
Answer: B
QUESTION NO: 222
Which command scans for system hardware, interface cards, and usable I/O system devices?
A. ioscan
B. lanscan
C. sysviewD. scansys
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 89
8/8/2019 HP0-P20 RONNIE
90/97
ActualTe
sts.com
Answer: A
QUESTION NO: 223
Which variable holds the result status of an executed command?
A. $!
B. $#
C. $?
D. $error
Answer: C
QUESTION NO: 224
You need information about linking files but don't know the specific command to use. Which
command points you to the right command?
A. which link
B. man-c link
C. man-k link
D. apropos link
Answer: C
QUESTION NO: 225
What is a benefit of using Ignite-UX?
A. reduces the cost of software distribution
B. updates all applications to their current versions
C. searches the internet for updates to all applications listed in the /etc/update file
D. automatically installs all current OS patches fromwww.hp.com/HP-UX/patches
Answer: A
QUESTION NO: 226
Which information is provided in the swiist output by default? (Select three.)
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 90
8/8/2019 HP0-P20 RONNIE
91/97
ActualTe
sts.com
A. version number
B. product/bundle size
C. product/bundle name
D. description of the product/bundle
E. directory where product/bundle is installed
Answer: A,C,D
QUESTION NO: 227
The /etc/resolv.conf file effects which service
A. NIS
B. NTP
C. DHCP
D. DNS/BIND
Answer: D
QUESTION NO: 228
On an NFS client, which configuration file is used to name the local mount point when mounting a
file system from an NFS server during system boot?
A. fstab
B. nfstab
C. exports
D. nfs.conf
Answer: A
QUESTION NO: 229
On HP-UX 11iv3, what is the default maximum protocol version of the NFS server and client?
A. 1
B. 2
C. 3
D. 4
Answer: C
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 91
8/8/2019 HP0-P20 RONNIE
92/97
ActualTe
sts.com
QUESTION NO: 230
The set_parms command is an interactive system set-up command that allows you to specify
which various parameters? (Select two.)
A. sendmail
B. timezone
C. IP address
D. security parameters
Answer: B,C
QUESTION NO: 231
Which commands query the DNS name server for IP related information? (Select two.)
A. dig
B. iplist
C. ipview
D. nslookup
Answer: A,D
QUESTION NO: 232
Which program invokes Internet server processes as needed?
A. inetd
B. ifconfig
C. swconfig
D. svrconfig
Answer: A
QUESTION NO: 233
What is the length of an IPv6 address?
A. 32 bits
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 92
8/8/2019 HP0-P20 RONNIE
93/97
ActualTe
sts.com
B. 48 bits
C. 64 bits
D. 128 bits
Answer: D
QUESTION NO: 234
What is the function of the HP CIFS Client?
A. to share HP-UXfile systems with Windows clients
B. tomount Windows file systems on an HP-UX system
C. to share HP-UX CIFS formatted disks with Windows clients
D. tomount Windows CIFS-formatted disks on an HP-UX system
Answer: B
QUESTION NO: 235
To enable the DHCP client on boot, the DHCP_ENABLE variable is set to '1' in which file?
A. /etc/hosts
B. /etc/nsswitch.conf
C. /etc/rc.config.d/netconf
D. /etc/rc.config.d/dhcp.conf
Answer: C
QUESTION NO: 236
What is an "alias" IP address?
A. an additional IP address on a single NIC
B. another (secondary) host using your host address
C. a short form of the IP address used to simplify connections
D. a duplicate (identical) address configured on two separate NICs on the same system
Answer: A
QUESTION NO: 237
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 93
8/8/2019 HP0-P20 RONNIE
94/97
ActualTe
sts.com
Which configuration file determines the mail relay behavior of the sendmail daemon?
A. /etc/sendmail.relay
B. /etc/mail/relay.conf
C. /etc/mail/sendmail.cf
D. /etc/rc.config.d/netdaemons
Answer: C
QUESTION NO: 238
Which file configures whether AutoFS is enabled or disabled on an HP-UX: system?
A. /etc/netconf
B. /etc/nfsconfC. /etc/a utomount.conf
D. /etc/rc.config.d/nfsconf
Answer: D
QUESTION NO: 239
You are installing an rx7640 with two internal disks and Mirror/Disk UX. Which RAID level provides
data protection for this environment?
A. RAID 0
B. RAID 1
C. RAID 3
D. RAID 5
E. RAID 1 +0
Answer: B
QUESTION NO: 240
Which file needs to be configured to automatically check and mount file systems?
A. /etc/sbtab
B. /etc/fstab
C. /etc/mnttab
D. /var/adm/fstab
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 94
8/8/2019 HP0-P20 RONNIE
95/97
ActualTe
sts.com
Answer: B
QUESTION NO: 241
Which default system setting is located in /etc/default directory?
A. default system time
B. default file system type
C. default disk space usage limits
D. default password for new users
Answer: B
QUESTION NO: 242
What is the main script that controls the start up of system services?
A. /sbin/rc
B. /sbin/ioinitrc
C. /sbin/bcheckrc
D. /sbin/preinitre
Answer: A
QUESTION NO: 243
Which features are enabled by the HP-UX WBEM (Web-Based Enterprise Management) provider
instrumentation? (Select three.)
A. HP-UX Software Assistant capabilities
B. HP Systems Insight Manager (HP SIM) inventory reports
C. HP Systems Insight Manager (HP SIM) user configuration
D. Management processor display of health of the server it is managing
E. HP Systems Management Homepage (SMH) display of component health
F. HP SIM and SMH display of system health and properties
G. HP System Management Homepage (SMH) configuration snapshots and inventory reports
Answer: B,E,F
QUESTION NO: 244
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 95
8/8/2019 HP0-P20 RONNIE
96/97
ActualTe
sts.com
Where is the default run-state found?
A. /etc/rc
B. /etc/rc3.d
C. /etc/inittab
D. /sbin/bcheckrc
E. defined by the user at boot time
Answer: C
QUESTION NO: 245
Which command is used to pvcreate a disk that has been previously used in LVM?
A. pvcreate-F/dev/dsk/c1t2d0B. pvcreate -f /dev/dsk/dt2d0
C. pvcreate-B/dev/rdsk/c1t2d0
D. pvcreate-f/dev/rdsk/cTt2d0
Answer: D
QUESTION NO: 246
What can an administrator do to optimize an existing JFS filesystem?
A. increase SWAP size
B. change mount options
C. change syslog.log size
D. increase the number of logical volumes
Answer: B
QUESTION NO: 247
If the console output displays a FAIL message of a service or application during system startup,
which file can provide additional information on the symptoms?
A. /etc/salog
B. /etc/rc.log
C. /etc/messages.log
D. /var/adm/sw/swagent.log
HP HP0-P20: Practice Exam
"Pass Any Exam. Any Time." - www.actualtests.com 96
8/8/2019 HP0-P20 RONNIE
97/97
ActualTe
sts.com
Answer: B
QUESTION NO: 248
Why do you use the HP-UX System Management Homepage (SMH) and its functional areas?
(Select three.)
A. to configure the HP-UX Event Monitoring System
B. to see the health of the system and its components
C. to manage a small number of systems in your environment
D. to perform HP-UX management tasks such as configuration
E. to run inventory reports and snapshot comparisons on the HP-UX system
F. to manage Web-BasedEnterprise Management subscriptions and view events on the system
Answer: B,D,F
QUESTION NO: 249
Identify the guidelines for selecting device swap areas. (Select two.)
A. one swap area per disk
B. dissimilar size of the disks
C. consider speed of the disks
D. 1st swap should have priority
E. minimum two swap areas per disk
Answer: A,C
QUESTION NO: 250
HP HP0-P20: Practice Exam