HQ-1

Embed Size (px)

DESCRIPTION

ijj

Citation preview

term len 0HQ-1#sh runBuilding configuration...Current configuration : 3218 bytes!version 12.4service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname HQ-1!boot-start-markerboot-end-marker!enable password cisco!no aaa new-model!resource policy!no network-clock-participate wic 1 no network-clock-participate wic 3 !!ip cefno ip dhcp use vrf connectedip dhcp excluded-address 10.1.2.0 10.1.2.175ip dhcp excluded-address 10.1.3.0 10.1.3.175!ip dhcp pool pod1-Voice network 10.1.2.0 255.255.255.0 default-router 10.1.2.101 !ip dhcp pool pod1-Data network 10.1.3.0 255.255.255.0 default-router 10.1.3.101 !!no ip domain lookup!!voice-card 0 no dspfarm!!!!!!!!!!!!!!!!!controller T1 0/1/0 framing esf linecode b8zs!controller T1 0/1/1 framing esf linecode b8zs!controller E1 0/3/0!!!!interface Loopback0 description Pod1 HQ loopback interface ip address 10.1.250.101 255.255.255.255!interface GigabitEthernet0/0 description Pod1, HQ (to Switch-1, fa0/5) no ip address duplex auto speed auto!interface GigabitEthernet0/0.101 description Pod1 HQ CCM VLAN (CCM1-1 and CCM2-1) encapsulation dot1Q 101 ip address 10.1.1.101 255.255.255.0 no snmp trap link-status!interface GigabitEthernet0/0.102 description Pod1 HQ Voice VLAN (HQ Phones) encapsulation dot1Q 102 ip address 10.1.2.101 255.255.255.0 ip helper-address 10.1.1.1 no snmp trap link-status!interface GigabitEthernet0/0.103 description Pod1 HQ Data VLAN (PC-1) encapsulation dot1Q 103 ip address 10.1.3.101 255.255.255.0 no snmp trap link-status!interface GigabitEthernet0/0.198 description Allows telnet to Switch-1 from Pod1 encapsulation dot1Q 198 ip address 3.1.0.1 255.255.255.0 no snmp trap link-status!interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto!interface Serial0/0/0 description To Pod2,HQ-2 (HQ-2, Serial0/0/0) bandwidth 128 ip address 10.12.1.101 255.255.0.0 encapsulation ppp no fair-queue clock rate 128000!interface Serial0/0/1 description To Pod1,BR-1 (BR-1, Serial0/0/1) bandwidth 128 ip address 10.1.4.101 255.255.255.0 encapsulation ppp clock rate 128000!interface Service-Engine1/0 no ip address shutdown!router ospf 1 log-adjacency-changes passive-interface GigabitEthernet0/0.101 passive-interface GigabitEthernet0/0.102 passive-interface GigabitEthernet0/0.103 passive-interface GigabitEthernet0/0.198 passive-interface Loopback0 network 3.1.0.0 0.0.0.255 area 0 network 10.1.1.0 0.0.0.255 area 0 network 10.1.2.0 0.0.0.255 area 0 network 10.1.3.0 0.0.0.255 area 0 network 10.1.4.0 0.0.0.255 area 0 network 10.1.250.101 0.0.0.0 area 0 network 10.12.0.0 0.0.255.255 area 0!!ip http server!!!!control-plane!!!voice-port 0/2/0!voice-port 0/2/1!!!!!!!gatekeeper shutdown!!line con 0 exec-timeout 0 0 privilege level 15 password cisco logging synchronous login ip netmask-format decimalline aux 0line 66 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120line vty 0 4 privilege level 15 password cisco logging synchronous login!scheduler allocate 20000 1000!endHQ-1#