HSM 125.2

BETRIEBSANLEITUNG AKTENVERNICHTER

OPERATING INSTRUCTIONS PAPER SHREDDER

NOTICE D‘UTILISATION DESTRUCTEUR DE DOCUMENTS

MANUALE OPERATIVO DISTRUGGIDOCUMENTI

INSTRUCCIONES DE SERVICIO DESTRUCTORA DE DOCUMENTOS

INSTRUÇÕES DE OPERAÇÃO DESTRUIDORA DE DOCUMENTOS

GEBRUIKSAANWIJZING PAPIERVERNIETIGER

BRUGSVEJLEDNING MAKULERINGSMASKINE

BRUKSANVISNING DOKUMENTFÖRSTÖRARE

KÄYTTÖOHJE PAPERINSILPPURI

1.270.999.153 – 0510

https://www.supplychimp.com

Aktenvernichter

deutsch

HSM 125.2

deutsch: Aktenvernichter HSM 125.2 ........................................................................ 3 – 6

english: Paper shredder HSM 125.2 ...................................................................... 7 – 10

français: Destructeur de documents HSM 125.2 ................................................... 11 – 14

italiano: Distruggidocumenti HSM 125.2 .............................................................. 15 – 18

español: Destructora de documentos HSM 125.2 ................................................. 19 – 22

português: Destruidora de documentos HSM 125.2 ................................................. 23 – 26

nederlands: Papiervernietiger HSM 125.2 ................................................................. 27 – 30

dansk: Makuleringsmaskine HSM 125.2 ............................................................ 31 – 34

svenska: Dokumentförstörare HSM 125.2 ............................................................. 35 – 38

suomi: Paperinsilppuri HSM 125.2 ..................................................................... 39 – 42

Pressen GmbH + Co. KG Bahnhofstraße 115 D-88682 SalemGermany West Chester, PA 19380

Tel.: +49 (0) 75 53 / 822-0 Phone: 001 610 918 4894 4899

E-Mail: support@hsm-online.dewww.hsm-online.de

Fax.: +49 (0) 75 53 / 822-160 Fax: 001 610 918

HSM of America LLC 1075 Andrew Drive Suite C

USA

E-mail: email@hsmofamerica.comwww.hsmofamerica.com

2 0510

https://www.supplychimp.com

Paper shredder HSM 125.2

1. Proper use, warrantyThe shredder is designed exclusively for destroying paper. Depending on the cutting type, it can also handle small quantities of the following materials: Credit and charge cards: 1.9 / 3.9 / 5.8 / 1.9 x 15 / 3.9 x 30 mm only CDs: 3.9 / 5.8 mm only Disks: 5.8 mm only Its sturdy drive mechanism is not damaged by paper clips and staples. Only on machi­nes with safety level HS Level 6 (1 x 5 mm) can the paper not contain staples or paper clips. We provide a warranty for the device in ac­cordance with our general sales and delivery terms. This warranty excludes wear, damage due to improper handling, natural depreciati­on, and actions taken by third parties.

2. Machine components

1

9

3

4

5

6

8

2

7

10

1 Warning advice 2 LEDs 3 Rocker switch 4 Cover 5 Name plate 6 Caution label 7 Bottom frame 8 Door 9 Paper feed opening 10 Feed opening for disks and CDs

3. Safety instructions• Read all instructions before start-up of the

paper shredder. Save these instructionsfor later use.

• Follow all warnings and instructions mar­ked on the product!

• Make sure no liquid is spilled on or in thepaper shredder.

• If the shredder is damaged or does notfunction properly, switch the device off,pull out the mains plug and inform ourservice engineers.

• Keep paper shredder out of the reach ofchildren.

• This shredder should be operated onlywith an operator in attendance.

Risk of injury! Do not reach into the paper feed slot.

Risk of injury from slivers! Wear protective goggles when destroying diskettes, CDs and hard credit cards.

Risk of injury by pulling in! Keep long hair, loose articles of clothing, ties, scarves, jewellery etc. away from feed opening. Material with the tendency to form loops, e.g. tapes, strap­ping material, etc. must not be shredded.

Before changing the location, cleaning or anything else other than normal operation turn off and unplug the paper shredder!

0510 english 7

https://www.supplychimp.com

HSM 125.2 Paper shredder

Mainte nan ce and ser vi ce work may be per for med on ly by: • HSM cu sto mer ser vi ce• spe cial ly trai ned staff

(e.g. qua li fi ed electri cians)• ser vi ce tech ni cians from our

con tracting part ners

4. Installation• This paper shredder should never be

placed near or over a radiator or heatsource.

• The ventilation slots must not be blockedor covered and they must be at a distanceof at least 10 cm away from walls or furni­ture.

• Make sure the mains plug is easily acces­sible.

• Before plugging in the mains plug, checkthat the voltage and frequency of yourlocal mains supply correspond to thosestated on the type plate.

• After putting the collection bag in place,push the frame (with bar A pointing to thefront of the cupboard) back into the guiderails.

A

5. Put ting in to ope ra ti onSwitching the paper shredder on

1 • Press rocker switch pos. 1.• Rocker switch locks in.• Green LED lights.• Paper shredder is ready for ope­

ration (standby).

Feed paper See „Technical data“ for sheet capacity. • The shreddingpro cess is star tedby a pho to –cell inthe paper feedingopening.• When the paper

fee ding opening is free again, the cut ting sy­stem au to ma tical ly swit ches off af ter app rox. 3 sec. and returns to standby.

Shredding CDs and disks (see “Pro­per Use”)

Feed CDs and disks through the slot in the safe­ty element. This protects you from splinters.

Swit ching paper shredder off • Tap rocker switch pos. 2.• Rocker switch resets to zero

position.

2

8 english 0510

!!JiM 22:i.2 P ~ ...o'.----/

https://www.supplychimp.com

Paper shredder HSM 125.2

6. TroubleshootingPa per jamYou have fed in too much paper.

Caution! 1 Do not press rocker switch alter­2 nately forwards/backwards

(pos. 1 / pos. 2): Cutting unit can be damaged.

• Press and hold down rocker2 switch pos. 2.

• Pa per is pus hed out.• Se pa ra te pa per stack.

1 • Press rocker switch pos. 1.• Feed pa per successively.

Cut material container full • Red LED on control panel lights.• Paper shredder switches offEmpty the cut material container,because if it is too full, malfunc­tions can occur in the cutting sys­tem• Tap rocker switch pos. 2.

2 • Remove full shredded materialbag and insert new bag.

Door contact interrupted • Red LED on control panel lights.• Paper shredder switches off.• Check whether front door is

closed properly.

If other faults occur, please check the follo­wing before calling our customer service: • Is mains plug in ser ted?• Is rocker switch tur ned on?• Is the mo tor over lo aded?al low mo tor to cool down for 15 - 20 min.

7. Maintenance and careCleaning:• Switch off the shredder, pull out the mains

plug.• When cleaning only use a soft cloth and a

mild soap-water solution. Never use scou­ring agents, cleaning fluid, petroleum orthinners.

When the cutting capacity drops or the noise increases (Cross cut):

• Switch paper shredder off:Tap rocker switch pos. 2.

2 • Spray special cutting block oil th­

rough paper feed opening acrossthe whole width of the cuttingsystem blades.

• Run cutting system backwards2 (pos. 2) without feeding paper.

• Paper dust and particles areshaken off.

8. Scope of delivery• Paper shredder, ready for connection, in

carton packing• 5 Bags for shredded material• Special cutting block oil 50 ml (cross cut)• Operating instructions

Acces so ries: • Bag for shredded material,

order No.: 1.330.995.000• Special cutting block oil 250 ml,

order No.: 1.235.997.401

0510 english 9

https://www.supplychimp.com

HSM 125.2 Paper shredder

9. Technical Data

Cutting type Strip cut Cross cut Shred size (mm) 5.8 3.9 1.9 3.9 x 30 1.9 x 15 0.78x11 1 x 5 Sa fe ty ra ting DIN 32757 – 1 2 2 3 3 4 5 Level 6* Cutting ca pa ci ty (sheets) 70 g/m2

DIN A4 80 g/m2 28 - 30 22 - 24

23 - 25 18 - 20

17 - 19 13 - 15

16 - 18 12 - 14

12 - 14 9 - 11

7 - 8 6 - 7

4 - 5 3 - 4

Weight 26 kg 30 kg Noise level (Idle running/ load) 60 dB(A) / 64 dB(A) 62 dB(A) / 64 - 70 dB(A) Cutting speed 120 mm/s 130 mm/s Lo ading width 255 mm Voltage 230 V, 50 Hz

100 V, 50/60 Hz – 115 V, 60 Hz Power for the maximum number of sheets 670 W Dimensions W x D x H (mm) 448 x 347x 828 Volume of shredded material bag 76 l

*) HSM-specification Technical and optical modifications reserved

Declaration of Conformity Machinery directive 98 / 37 / EG EMC directive 89 / 336 / EWG Low voltage directive 73 / 23 / EWG

The manufacturer HSM Pressen GmbH + Co. KG, Bahnhofstraße 115, D-88682 Salem declares herewith, that the paper shredders HSM 125.2 correspond with the aboved mentioned EC Machine Directive including all relevant modifications. Applied standards and technical specifications: • EN 55014-1:2000 + A1:2001 + A2:2002 • EN 61000-4-4:1995 + A1:2001 + A2:2001• EN 55014-2:1997 + A1:2001 • EN 61000-4-5:1995 + A1:2001• EN 61000-3-2:2000 • EN 61000-4-6:1996 + A1:2001• EN 61000-3-3:1995 + A1:2001 • EN 61000-4-11:1994 + A1:2001• EN 61000-4-2:1995 + A1:1998 + A2:2001 • EN 60950-1:2001• EN 294:1992

Salem, 01.07.2003 Rolf Gasteier - Technical Director

Machine type inspection for compliance with the requirements of the EC Machine Directive was carried out by the „Admi-nistration“/Inspection Authority Committee of Experts, Subject Area „Office Machines and Devices“, on the premises of the Verwaltungs-Berufsgenossenschaft, Deelbögenkamp 4, D-22297 Hamburg. This inspection authority is the authority respon­sible in accordance with Annex V of the EC Machine Directive.

10 english 0510

https://www.supplychimp.com