Upload
mahmoud-ali
View
224
Download
0
Embed Size (px)
Citation preview
8/13/2019 HSPA configue.pptx
1/26
HUAWEI TECHNOLOGIES CO., LTD.
www.huawei.com
Huawei Confidential
Security Level:
FeatureConfiguration
2014/1/22
8/13/2019 HSPA configue.pptx
2/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 2
Table of Contents
Parameter/License ConfigurationHSDPAHSUPAHSPA+DC-HSPA+
8/13/2019 HSPA configue.pptx
3/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 3
Table of Contents
Parameter/License ConfigurationHSDPAHSUPAHSPA+DC-HSPA+
8/13/2019 HSPA configue.pptx
4/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 4
Parameter/License Configuration(HSDPA RNC )
The threshold to determine whetherthe service is carried out on HSDPA ornot
DL streaming traffic threshold on HSDPA:Rate threshold for decision to use HS-DSCH tocarry DL PS streaming services. When themaximum DL service rate is higher than or equalto this threshold, the service will be carried on
HS-DSCH. Otherwise, it will be carried on DCH.traffic threshold on HSDPA
8/13/2019 HSPA configue.pptx
5/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 5
Code allocation
-RNC-controlled static or dynamic code allocation is enabledthrough the parameter AllocCodeMode . NodeB-controlleddynamic code allocation is enabled through the parameterDynCodeSw .-The dynamic code allocation controlled by the NodeB ismore flexible than that controlled by the RNC. It shortens theresponse time and saves the Iub signaling used for code
reallocation.
8/13/2019 HSPA configue.pptx
6/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 6
Parameter/License Configuration(HSDPA Cell per RNC)
The Allocate Code Mode is setto Manual, which means the codeallocation will be determined byNode B instead of RNCCode number is valid only if themode is manual.HS-SCCH code number is set as2, this will make the maximumavailable codes left for HSDPA isonly 15 .HSDPA must be activated.
8/13/2019 HSPA configue.pptx
7/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 7
Parameter/License Configuration(HSDPA Node B)
If the Allocation CodeMode is set to manual(as mentioned in previousslide), the Dynamic CodeSwitch must set toOPEN at Node B side toallocate the code.
8/13/2019 HSPA configue.pptx
8/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 8
Parameter/License Configuration(HSDPA Node B)
In order for the HSDPA tofunction, the HSDPA Function
and HSDPA RRM Package1 must be activated (YES) The Max HS-PDSCH CodeNumber will be determined byhow many of the Local Cell. Eachlocal cell need at least 15 codes.
8/13/2019 HSPA configue.pptx
9/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 9
Table of Contents
Parameter/License ConfigurationHSDPAHSUPAHSPA+DC-HSPA+
8/13/2019 HSPA configue.pptx
10/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 10
Parameter/License Configuration(HSUPA RNC)
Type of Channel PreferablyCarrying Signaling RB(HSUPA(UL_EDCH,DL_DCH))In order to achieve HSUPA5.76Mbps, the SRB over HSUPA
must be turn on.The traffic threshold is todetermine whether the service iscarried out on HSDUA or not
8/13/2019 HSPA configue.pptx
11/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 11
Parameter/License Configuration(HSUPA RNC)
Other than the SRB over HSUPA,the HSUPA TTI_2ms must beactivated as well to obtain HSUPA5.76.
8/13/2019 HSPA configue.pptx
12/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 12
Parameter/License Configuration(HSUPA RNC)
HSUPA Must be activated.
8/13/2019 HSPA configue.pptx
13/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 13
Parameter/License Configuration(HSUPA Node B)
The license in Node B for theHSUPA Function & HSUPA TTIFunction must be activated.
8/13/2019 HSPA configue.pptx
14/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 14
Table of Contents
Parameter/License ConfigurationHSDPAHSUPAHSPA+DC-HSPA+
8/13/2019 HSPA configue.pptx
15/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 15
Parameter/License Configuration(HSPA+ RNC)
HSPA+ is similar to HSDPA, just that it added one moreModulation Schemes, whichis 64QAM.
Thus, in RNC, theHSDPA_64QAM_Switchmust be turned on in orderto use HSPA+
8/13/2019 HSPA configue.pptx
16/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 16
Parameter/License Configuration(HSPA+ RNC)
LST UCELLALGOSWITCH: CELLID=9132;
Other than RNC level, the64QAM and DL L2Enhancedfunction on Cell level must beactivated as well.
8/13/2019 HSPA configue.pptx
17/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 17
Parameter/License Configuration(HSPA+ Node B)
The license in Node B is similarwith HSDPA, but the license forLocal cells to support DL64QAM must be activated aswell.
8/13/2019 HSPA configue.pptx
18/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 18
Table of Contents
Parameter/License ConfigurationHSDPAHSUPAHSPA+DC-HSPA+
8/13/2019 HSPA configue.pptx
19/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 19
Parameter/License Configuration(DC-HSPA+ RNC)
DC-HSPA+ is using thesame HSPA+ technique, butwith data from two differentfrequencies, F1 & F2 (DualCell)Hence, the 64QAM andHSDPA DC switch must beactivated.
8/13/2019 HSPA configue.pptx
20/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 20
Parameter/License Configuration(DC-HSPA+ RNC)
In the Fundamental ResourceConfiguration (FRC), the preferenceused of technology must be selectedas DC-HSDPA
8/13/2019 HSPA configue.pptx
21/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 21
Parameter/License Configuration(DC-HSPA+ RNC)
LST UCELLALGOSWITCH: CELLID=9132;
During the cell level, 64QAM,DL L2Enhanced and DC-HSDPA function switch must beturned on.
8/13/2019 HSPA configue.pptx
22/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 22
Parameter/License Configuration(DC-HSPA+ RNC)
In order for DC-HSPA+ to work, the TCell (TimeOffset) for F1 & F2, must be set as the same value.
8/13/2019 HSPA configue.pptx
23/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 23
Parameter/License Configuration(DC-HSPA+ Node B)
The license in Node B for theDC must be activated so thatthe local cell can support theDC function.
8/13/2019 HSPA configue.pptx
24/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 24
Parameter/License Configuration(DC-HSPA+ Node B)
The two cells at the samesector must be set in the dualcell group at the Node B side.
8/13/2019 HSPA configue.pptx
25/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 25
Parameter/License Configuration(DC-HSPA+ Node B)
Display the local cell in Node Bto check the DC mode isenabled.
8/13/2019 HSPA configue.pptx
26/26
HUAWEI TECHNOLOGIES CO., LTD. Huawei Confidential Page 26
Thanks