Upload
lyhuong
View
219
Download
2
Embed Size (px)
Citation preview
www.morbark.com
HT1042 SHREDDER
The HT1042 features a single-rotor design and adjustable
anvil, allowing the operator to quickly change machine
set-up based on material to be processed.
FEATURES
» The HT1042 is an aggressive, versatile slow-speed shredder designed as a universal machine for reducing wood (pallets, demolition wood, green waste, etc.), industrial waste (railroad ties, construction, demolition, tires, plastic, etc.) and other waste streams
» Belly Conveyor is 17'10" x 40" (5.44 m x 12.19 m), featuring pan support with Dura-lite™ slides and EP 400/3 smooth belting
» Stacking Conveyor is 25'6" x 48" (7.77 m x 121.92 cm), featuring pan support with Dura-lite™ slides and 3-ply aggregate belt with chevron cleats
» Optional Cross Belt Magnet for removing trapped metal contamination
MORBARK® HT1042 SHREDDER
www.morbark.com 800.831.0042SPECIFICATIONS MAY VARY WITH EQUIPMENT OPTIONS 2/15/17
SPECIFICATIONS US METRICWeight 70,547 lbs 31,999.58 kg
Length (transport) 32'5" 9.88 m
Length (operating) 51'7" 15.72 m
Height (transport) 13' 3.96 m
Height (operating) 11'11" 3.63 m
Width 8'4" 2.54 m
Discharge Height 15' 4.57 m
Engine CAT
Horsepower 540 HP 402.7 kW
Fuel Capacity (tank) 184 gallons 696.5 litres
Hydraulic Oil Capacity 200 gallons 757 litres
Rotor Chamber 3'6" x 9'8" 1.06 m x 2.95 m
Rotor Length 9'10" 3 m
Rotor Diameter 3'5" 1.04 m
Rotor Weight 9,500 lbs 4,309.1 kg
Rotor Speed Variable 0 to 40 RPM
Rotor Torque 2.2 million inch pounds 248,566.6 N•m
Tracks Optional
2
3/8" AR400 steel welded onto Rotor Drum for added strength and durability.
ROTOR SURFACE WEAR PLATES
3
Machined and Heat Treated Alloy Steel with tungsten carbide applied for extended wear.
INSERTS 4
2½" thick 4140HT steel welded to the rotor tube for secure bolting of inserts.
HAMMER/INSERT HOLDER
5
1 ¼" AR400 steel welded to 1" A572 GR 50 steel. This is where the hammer passes through to make the initial cut/breakdown of material.
COUNTER KNIFE/ANVIL TOOTH ASSEMBLY
6 COUNTER KNIFE/ANVIL DOOR POSITION ADAPTER
1 ½" A572 GR 50 steel, the door can be arranged in 6 different positions to alter size of end product and tolerance level for trapped metal contamination.
1" thick A572 GR 50 steel used for supporting the Rotor Drives and as the foundation for the base.
BASE END WALL1
2
56
1 3 4