Upload
tyrone-owen
View
220
Download
0
Tags:
Embed Size (px)
Citation preview
H.Taureg Technical Forum June 2003 1
B and T monitoring
•News on
•B field mapping
•B field monitoring
•Temperature monitoring
H.Taureg Technical Forum June 2003 2
B field mapping
• measuring machine for dipole is being constructed
• solenoid machine to be modified
• mapping in September /October 2004
H.Taureg Technical Forum June 2003 3
Dipole measuring machine LHC-b, view along beam
H.Taureg Technical Forum June 2003 4
Dipole measuring machineLHC-b, view of vertical plane through the beam
H.Taureg Technical Forum June 2003 5
Solenoid measuring machine
sensors
rotation axis
rail
chariot
H.Taureg Technical Forum June 2003 6
Sensor head for solenoid
H.Taureg Technical Forum June 2003 7
56.5 mm30 mm
56.5 mm
30 mm
precision hole for dowel pin
hall probes
ADC
addressing
thermistor
mux
Hall probe plate
H.Taureg Technical Forum June 2003 8
probe 1
probe 2 probe 3
thermistor
glass cube
“bond”
support
Hall probes
H.Taureg Technical Forum June 2003 9
NMR and Hall probes
NMR
Hall
H.Taureg Technical Forum June 2003 10
• Try to monitor ‘environment’ inside L3 solenoid and UX cavern
• Temperature probes NOT part of any specific sub-detector
• Counting rooms (PX, SX) and racks not included in this job
Temperature probes
H.Taureg Technical Forum June 2003 11
Temperature probes
H.Taureg Technical Forum June 2003 12
8 along cavern roof,
4 above cooling units
along gangways
above racks below muon arm
Locations in the cavern
H.Taureg Technical Forum June 2003 13
Locations on the support frames
18 probes around outer rim of support frames,
3 times along beam direction, at the two ends and in the center,
54 total