8/11/2019 Huawei Embedded Power System ETP48200-A6A1 B6
DataSheet
1/2
Embedded DC Power System
ETP48200-A6A1 and ETP48200-B6 are AC/DC embedded power
system with excellent performance such as high power
efficiency,
intelligent battery management, remote monitoring, wide range
of
AC input voltage, etc. The system configures 50A of 2U high
rectifier modules, and provides rated current output of
200A.
ETP48200-A6A1 and ETP48200-A6A3 can be embedded in 19-inch
rack or cabinet.
Wireless base station
Transmission network
Communication network of enterprise
Application Scenarios
Features
Introduction
ETP48200-A6A1, ETP48200-B6
Wide range of AC input voltage from 85V to 300V
Wide operation temperature range of rectifier from -40 to 75
Online-swappable rectifier provides easy installation and
maintenance
Standard installation structure design, adapting to various
scenarios
Compact design, saving space and installation cost
High rectifier efficiency over 96% helps to save energy
Excellent rectifier dormancy function helps to increase
system
efficiency
Intelligent battery management and protection helps to
prolong
battery lifespan
Support environment monitoring and remote management
through dry contact, serial interface or Ethernet interface
ETP48200-A6A1
ETP48200-A6A3
8/11/2019 Huawei Embedded Power System ETP48200-A6A1 B6
DataSheet
2/2
HUAWEITECHNOLOGIESCO.,LTD.
HuaweiIndustrialBase
Bantian
LonggangShenzhen518129,P.R.China
Tel:+86-755-28780808
www.huawei.com
Copyright Huawei Technologies Co., Ltd. 2013. All rights
reserved.
No part of this document may be reproduced or transmitted in any
form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
General DisclaimerThe information in this document may contain
predictive statements including,without limitation, statements
regarding the future
financial and operating results, future product portfolio, new
technology, etc. There are a number of factors that could cause
actual
results and developments to differ materially from those
expressed or implied in the predictive statements. Therefore,
such information is provided for reference purpose only and
constitutes neither an offer nor an acceptance.
Huawei may change the information at any time without
notice.
Specifications
Type ETP48200-A6A1 ETP48200-B6
System
Dimension 482.6mm(W)310mm(D)266.7mm(6U,H)
Weight 20kg (without rectifiers)
Cooling mode Natural cooling
Installation mode Installed on 19-inch rack or cabinet
Cabling mode Left inlet and right outlet
Maintenance mode Front access, support module grade change
Protection level IP20
ACDistribution
Input mode 220/380VAC 3-phase or 220VAC single phase 220VAC
single phase or 110VAC dual-live wire
Input voltage 220VAC/380VAC 220VAC/110VAC
Input breakers 163A/3P 1100A/2P
Output breakers 120A/1P, 216A/1P 116A/2P
Input frequency 45~66Hz, rated value: 50Hz/60Hz
SPD 30kA/60kA, 8/20s 30kA/60kA, 8/20s
DCDistribution
Output voltage 42~58V DC, rated value: 53.5V DC
Maximum capacity 12kW
Battery breakers 2125A/1P
Load breakersLLVD: 2100A/1PBLVD: 163A/1P, 132A/1P, 316A/1P
LLVD: 2100A/1P, 120A/1PBLVD: 163A/1P, 132A/1P, 316A/1P
SPD 10kA/20kA8/20s NA
Rectifier
Input voltage 85VAC300 VAC, rated value: 220VAC
Efficiency 96%
Rated Power 3000W(176~300VAC)
Workingtemperature
-40~+75(derated output above 55)
Dimension 103mm(W)243mm(D)88.9mm(2U,H)
Weight 2.8kg
Cooling mode Forced cooling
Power factor 0.99
THD 5%
Controller
Signal input6 digital input, 1 door magnetism, 1 water logging,
1 smoke, 2 temperature, 1 battery temperature, 1environment
temperature and humidity
Alarm output 8 dry contact output
Communication port RS232/485, FE
Display mode LCD
Environment
Operatingtemperature
-40~+65
Storage temperature -40~+70
Operating humidity 5%~95%(non-condensing)
Altitude0~4000m(If the altitude is within the range of 2000m to
4000m, the maximum operating temperaturedecreases by 1 as the
altitude increases by 200m.)
Remark: Optional rectifiers with power efficiency >92% are
available for this system.
