Upload
derick-thornton
View
222
Download
0
Tags:
Embed Size (px)
Citation preview
HUMAN RESOURCE TRAINING & CONSULTANCY INSTITUTE
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
Test Facilities and Amenities Infrastructure.
A. Practical Test Facilities Provision
1. Roofing construction with insulation1. Roofing construction with insulation2. Ventilated chain link fence2. Ventilated chain link fence3. Adequate fan ventilation3. Adequate fan ventilation4. Bright lighting4. Bright lighting5. Adequate power point provided for tools5. Adequate power point provided for tools6. 20 days for Plastering/Tiling trade6. 20 days for Plastering/Tiling trade7. Washing bays for Plastering/Tiling/Bricklaying7. Washing bays for Plastering/Tiling/Bricklaying8. Big clock for candidates to view the time8. Big clock for candidates to view the time9. Fire Extinguishers9. Fire Extinguishers10. First Aid Boxes10. First Aid Boxes11. Number for each work bay11. Number for each work bay12. Sufficient space for each worker12. Sufficient space for each worker13. Workshop space – 18 m. X 18 m.13. Workshop space – 18 m. X 18 m.14. Floor level to eaves of roof – at least 4 m.14. Floor level to eaves of roof – at least 4 m.15. Adequate power generators for backup 15. Adequate power generators for backup electricity supplyelectricity supply16. Adequate plumbing and sanitary facilities.16. Adequate plumbing and sanitary facilities.
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
B. B. Tester’s OfficeTester’s Office
1. Attached toilet1. Attached toilet
2. Air-conditioning2. Air-conditioning
3. Half-height glass3. Half-height glass
4. Raised Floor (2 or more steps)4. Raised Floor (2 or more steps)
5. Bright lighting5. Bright lighting
C. C. Fingerprint Identification System (FIS)Fingerprint Identification System (FIS)
1. 2 numbers of Laptops with adequate RAM, hard disk and interfaces1. 2 numbers of Laptops with adequate RAM, hard disk and interfaces
2. at least 2 compatible digital cameras with necessary drivers and 2. at least 2 compatible digital cameras with necessary drivers and functionsfunctions
3. Compatible Softwares, including Operating Softwares3. Compatible Softwares, including Operating Softwares
4. Admin support/comply procedures4. Admin support/comply procedures
5. Uninterrupted Power Supply with backup for at least 1 hour5. Uninterrupted Power Supply with backup for at least 1 hour
CROSS SECTIONAL VIEW (Building Trades)
Raised Ground level1
Height not
less than 4m
At least
0.5m.
Roof- Insulation Material
Chain link fencing
above wall
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
D. SEK (K) Exam Room/BEA/Classroom
1. Air-conditioning & ventilation2. Bright lighting3. Chairs and tables for 100 person4. 1 Office table for FIS operation5. Curtains to window6. Audio system & speakers7. Heavy duty shredding machines (at least 16 forms per feed)8. Sound insulation (low noise)9. Power points for FIS/shredder10. Clock.
E. OTC General Office
1. High speed fax machine2. Phone line with internet connection3. Computer 4. Email5. Air-conditioning &ventilation
Gate Gate
GateGate
Gate
Door
Door
Registratio
n Area
Washing
Bay
Min. distance
desk/chair-1m side
by side
18m 18m
18m
18m
Finishing
Structure
Tester Room
-Air conditioned
-Attached toilet
-2.1m height
-Glass panel on all sides
-Raised floor (2steps)
-1 Door
Lect
ure
Room
wit
h A
/C
Typical Layout Plan
OTC Premises (Building Trades)
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
• The Facility Plan should be developed in consultation with CIDB to ensure maximum efficiency.
• The structure and building of the test centers should be certified by a locally certified Engineer according to the local building codes to be structurally safe.
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
Training Courses1. Steel Reinforcement Work
2. Metal Form work
3. Timber Form Work
4. Brick laying
5. Plastering
6. Tiles laying
7. Steel Structure Fitter
8. Pipe Fitter
9. Welder
10. Others
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
All the courses include 2 (two) Parts:
PART – 1: THEORITICAL PART – 2: PRACTICAL
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
Part – 1 THEORITICAL
FUNDAMENTAL JOB KNOWLEDGE
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
1. TOOLS AND MATERIALS APPLICATION2. DRAWING AND DESIGN APPLICATION
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
SYMBOL
LANGUAGE
SAFETY
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
Basic Understanding of: SOCIAL CODES CRIMINAL LAW LABOR LAW
SELF DEVELOPMENT
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
Part – 2 PRACTICAL
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
• IMPROVING WORKING SKILL
• OPERATING TOOLS IN THE FIELD OF MATERIALS
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
1. MAINTAINING THE PARAMETER OF DESIGN & DRAWING
2. TO ACHIEVE TARGET TO FINISH THE PROJECT WITHIN TIMELIMIT
3. MAINTAINING TECHNICAL REQUIREMENTS AND QUALITY
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
Course Evaluation Criteria
WRITTEN TEST (1 HOUR)
PRACTICAL TEST (4 HOURS)
STEEL REINFORCEMENT
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
TOPIC 1- BUILDING ELEMENTS
a) The main components of RC buildings are namely the beams, columns, walls, slabs, footings and pile caps;
b) Slabs transfer loads to the beams, beams transfer loads to the columns, pile caps
TOPIC 2- GENERAL KNOWLEDGE OF STEEL REINFORCEMENT WORKS• Corner main bars to the stirrups in a beam, column, slab and wall
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
TEST PAPERTEST PAPERSAMPLESAMPLE
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
WRITTEN TEST (1.5 HOUR)
PRACTICAL TEST (5 HOURS)
METAL FORMWORKS
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
TOPIC 1- GENERAL KNOWLEDGE OF FORMWORK
RC building elements
1. Two main building materials, concrete and steel reinforcement bars.2. Know the names of the main components (columns, beams, stabs, walls, footings
and pile caps)3. Know that slabs transfer loads to beams, beams transfer loads to columns to pile
caps or footings,
Types of formworkThe formwork is a temporary structure.
1. Conventional timber formwork2. Metal Framework3. System formwork4. Formwork materials and accessories
TOPIC 2
• Corner main beam, column, slab and wall
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
TIMBER FORMWORK
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
FOR MIDDLE EAST
1. Basic Arabic knowledge on working tools and related items.
2. Basic spoken English
3. Basic UAE criminal, social and labor laws.
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
Basic Training For Cleaner
Development of fundamental English Conversations and Communication Skill development. Basic knowledge of cleaning tools. Introduce Cleaning chemicals and mixing Health and Safety. Commercial and Residential and Outdoor cleaning
knowledge Health and Safety.
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
Basic Training For Security Guards
Development of fundamental English Conversations and Communication Skill development. Basic IQ development. Development of Gesture and Posture. Role of Security Guards. Health and Safety. Emergency and Fire Awareness.
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
ROLE OF SECURITY GUARDS.
1. what is the importance of guards.2. Different types of guards. Construction/Building/Bank/etc3. Duties of a guard.4. Discipline, Attendance, Timing, Learning interest, grooming.5. Customer service – Professional and Public Relations.
HEALTH and SAFETY.
1. What is safety?2. What is occupational safety.3. Accident and Incident reporting.4. Healthy eating habits.5. Personal cleanliness and grooming.
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
• FIRE AWARENESS :
1. Fire alarms, false alarms, notifications reporting fire alarms.2. Usage of different types of fire Extinguishers.3. Usage of Sprinklers/Hose Reels/Smoke Detectors.4. Emergency evacuation procedure.5. Fire Fighting.6. Responding to immediate crisis.
• FIRST AID :
1. First aid usage2. when to call ambulance.
• INCIDENTS / ACCIDENTS :1. Reporting procedure and systems
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
DISCUSSION
MAX MANAGEMENT AND SERVICES
GOVT. APPROVED. RL NO # 1084
Md. Mahfujur RahmanProprietor
MAX MANAGEMENT AND SERVICES. GOVT. APPROVED RL NO # 1084