Husqvarna LGC Catalogues 2011 International

2011LANDSCAPING AND GROUND CARE

2

We have been delivering reliable machines to professional users around the globe for over 50 years. It all started with our ground-breaking chainsaws which featured smart, unique solutions combining high productivity with superb ergonomics. These qualities have been retained over time as we have created an all-inclusive range of wheeled machines for efficient landscaping and ground care. All products are the result of an extensive programme of development in close consultation with end users, who are particularly influential when we design machines such as rotary front mowers, brushcutters and hedge trimmers. Which, at the end of the day, helps them to do the best job possible.

3

Contents.

Innovations and customer cases

Service

Brushcutters and trimmers

Hedge trimmers

Blowers

Chainsaws and power cutters

Zero-turn mowers

Rotary front mowers

Lawnmowers

Lawn care machines

Clothes and protective equipment

We reserve the right to make changes in technology and specifications without prior notice.

4

10

12

26

34

42

60

70

80

94

102

4

Special solutions to us are standard solutions.

Cutting-edge engine technology.We were one of the first to use catalytic converter technology for effective emission control. But the solution that has really been ground breaking is the patented engine technology X-Torq. This technology produces extra torque over a wider rpm range, which provides raw power and rapid accelerations. Also, by using pure air instead of an air / fuel mix to flush out exhaust fumes, the X-Torq engine consumes up to 20 % less fuel and gives up to 75 % lower exhaust emissions. Furthermore, X-Torq is a light and durable engine that requires a minimum maintenance and service. AutoTune™ is another new, unique feature that really boosts productivity. It automatically fine-tunes the engine for optimal operation. Independent of factors like temperature, humidity, altitude, fuel type and air filter condition.

Unique cutting results.Our Combi deck, which makes it possible to switch quickly between mulching and rear discharge, is unique in several respects. The deck is stamped from one single sheet of 4.5 mm steel. The cover and blade system have been primarily developed for efficient mulching, which gives cutting results that are better than other ride-on mowers on the market. The very low design means the driver does not need to dismount the mower to move things like park benches in order to cut all areas of grass. In addition, the mower is fitted with a versatile lifting system to fold the deck into service position. This allows the driver to quickly and easily clean the machine and check that all the blades are sharp – thus guaranteeing the best conceivable cutting results.

That’s what differs our machines from others on the market. Here are some examples of special solutions. All our machines are packed with these and many other unique features, in order to help our customers to work efficiently and comfortably.

5

Optimum driver environment.When we developed our rotary front mowers the aim was, in addition to generating superb performance and cutting results, to design a functional and ergonomic driver environment. As is usually the case, we listened to the requests of users and conducted comprehensive ergonomic studies. The result was that we positioned all the controls at a perfect height close to the driver, we made sure that the steering wheel and seat were adjustable, and ensured the floor level gave the driver ample leg room with the option of changing position. These are just a few measures worth mentioning, all designed to ensure that the driver is able to sit comfortably without the need of leaving his seat, and can work as effectively as possible.

Effective vibration reduction.High performance is vital, but being able to work as effectively as possible for long periods requires machines that are comfortable to hold. Our solution for this is Low Vib, a system for the effective vibration damping of the controls and handles on our brushcutters, trimmers, hedge trimmers and chainsaws. Thorough dynamics and resonance calculations in combination with extensive tests have resulted in a range of unique solutions that contribute to extremely low levels of vibration (in certain cases measured at around 1 m / s²). All this to create the conditions for high productivity – at the same time as our users avoid exposure to tiresome vibrations.

6

Users worldwide are constantly putting our machines to the test.What better way to get a true understand of what our users really think than by talking to the people who put our power products through their paces everyday. These are the people who demand top performance and from what we hear from them, we are delivering just that.

Borussia Dortmund is one of the most successful clubs in German football. In addition to six German football championships and two German Cup victories, Dormund won the Cup Winners’ Cup in 1966 and the UEFA Champions League in 1997. Willi Droste, head greenkeeper together with his 10 employees is responsible for all the club’s green spaces including 6 training fields, other green areas and parking spaces.

His priority is the maintenance and care of the Signal Iduna Park. Originally a farmer, Willi has been with the club thirteen years. His passion for his work and his love for the club means he takes his role seriously and meets every challenge with determination. We asked Willi what it means to be in charge of this kind of work:“Being responsible for the playing field of a premier league club puts you under constant observation, and

pressure. Some match day, millions of people are watching. If you want to play football at the highest level, you also need a perfect lawn. Players and coaches have high expectations and it’s justified. We have a responsibility to the club, the supporters and of course the players – they rely on us to make it work for them. Just as the club relies on me to do a good job, I need to be able to rely 100 % on my machines. Besides from

BUNDESLIGA, GERMANYWilli Droste, Head Greenkeeper Borussia Dortmund.

7

giving top performance and being easy to handle I expect them to be ready at all times, whatever the conditions we are working in. We have to be ready. Service intervals are key. I can’t afford the time for my machines to be out of action.” When asked about his experience with Husqvarna Willi told us: “ When I worked as a farmer, Husqvarna was the power products I relied on. Being a farmer is a tough job and they didn’t let me down. I introduced them here when I started all those years ago. Today I know I made the right decision. Everything works smoothly. Yes I’m satisfied. We have quite an extensive pool of equipment. Currently we are using 5 lawn tractors and 2 front mowers PF 21. 5 different lawnmowers with Bioclip functions and 3 aerators. But it’s not just about the lawns. We also have 2 of each 356BTX and 125BVX blowers. 1 of each 325HE3X and 123HD60 hedge trimmers and a top handle T435 chainsaw. You see, we’re using almost everything Husqvarna has to offer. Because they help us to do not just a good job, but a great job. And that’s the most important thing to me.

You asked me how often I update my equipment and what my reasons are for choosing Husqvarna. We work

with our equipment for 2 years before I changing. Of course I consider other brands but having worked with Husqvarna for so many years I know I can rely on these products. The quality is right and durability high. Handling is not difficult for new members of my team. It doesn’t take long before their work is productive. The assortment is large and I know I’ll find the right product for the job I need to work with. It’s not about one-stop shopping, it’s about a company who understands what we have to achieve and what we need to do the job well. We work with Mertin from Werl. They know their business and their service is exemplary. Whenever a problem occurs they come here and take care of it on the spot. Their repair shop is open on weekends. That’s important, I simply can’t wait until the Monday. A few days can make

a big difference to us when we are working to a set schedule. They are a proactive dealership and give me competent advice. Mertin’s also show me products and keep me up-to-date with the latest developments in Husqvarna technology. They let me try the products for a few days. That definitely helps me to make the best decisions when it comes to buying. And with the constant renewal of my machine pool it’s crucial. If I had to sum up my relationship with Husqvarna’s products and representatives, I would have to say that their consistent reliability and commitment to their products makes them the ideal partner for my business.”

“…their consistent reliability and commitment to their products makes them the ideal partner for my business.”

8

BEILEN, HOLLANDHenk Booiman, Owner of Booiman tuinen BV.Booiman Tuinen is a modern, medium sized landscaping company. Enthusiastic staff and an inspiring leadership has put them right at the forefront of their industry. They specialise in garden construction, garden maintenance, tree care, landscaping and turf care. With 18 years behind them, and 21 employees, they’re a successful growing company. We asked Henk which jobs give him the most satisfaction: “Almost everyday is interesting. We are currently working on a contract with the new Van Der Valk Hotel in Sneek. It’s very challenging as it demands all our skills and experience to develop and manage this vast property.”

What would you say you look for most when buying your equipment: “In our business, every job is different and we need the machines to work the way we do. Especially as we are the ones often moulding the landscape. Reliability, ergonomics, cost of ownership and power ratio are what I’d say our machines have to live up too. That’s what can make or break a company.” You have been working with Husqvarna products since 1998. What difference has this made to the work and the company: “Before we worked with machines from many different companies. I decided that Husqvarna was the right partner for my business. Apart from superb products they offer me the best support. I deal directly with Tiijms in Geesbrug and they are pro-active as well as service orientated. Their advice is always excellent. Apart from

products, they help me with financing, recurrent services, assistance in the field. Yes working with Husqvarna is definately a collaboration that pays off.”

9

StOCkHOLM, SWEDENNicolai Ussing, Manager, Landscaping and Garden Care, HSB Södertörn.HSB is Sweden’s largest organization for housing co-operatives, incorporating some 3900 co-ops around the country. It’s divided into 32 regional associations, one of which is HSB Södertörn in the outskirts of Stockholm. This association manages about 12000 housing units and commercial premises for local housing co-operatives and for organizations that own common property, as well as public and private property owners. Nicolai Ussing is in charge of landscaping and garden care at HSB Södertörn. He plans the construction and maintenance of the green spaces on all the properties that his association manages. Lots of the work is about mowing large lawns. For instance in Botkyrka where Ussing’s staff mows an area equivalent to no less than 160 football fields. In Botkyrka, HSB Södertörn manages the mowing of lawns

corresponding to an area no less than 160 football fields. For this reason, Nicolai Ussing values one quality above all else, when choosing machines:“That they’re reliable. We don’t have time for machines that stop in the middle of a job. You also need a good

service organization, for instance with access to loaners. This is extremely important. In addition to reliability, the machines have to be well thought through from the start, and have the features we want.” HSB Södertörn has used machines from Husqvarna for many years. They have front mowers like the PT 26D and lots of handheld machines such as trimmers, brush cutters and chainsaws. “Apart from the products themselves, another important reason why we use Husqvarna is the attentive, prompt service we get from our dealer in Nynäshamn. They really go out of their way, and give us good support. Also, sometimes we get to test new products and give feedback on them. They listen to us – we simply have a good dialogue.”

10

Innovations that keep you going.Our extensive research and development programme generates an even flow of in-house innovative technical solutions. Solutions that will help you build a profitable business. With us as your partner you can enjoy the benefit of a long-term collaboration with a manufacturer who develops and engineers products specifically adapted for commercial use in your particular line of business.

Access to quick service.Planned services in line with our recommendations is the best way to avoid unexpected and costly operational stoppages. But as you well know, situations sometimes arise that cannot be predicted. In such instances you can rest assured that your distributor has technical expertise, equipment and spare parts to take rapid action to help you. To further ensure productivity, you get a two-year factory guarantee when you buy a PT 26D, P 520D, P 524 or a professional zero-turn mower.

Close cooperation with qualified distributors has always been a cornerstone of our offer to companies in landscaping and ground care. Of course, our responsive and technically proficient distributors can assist you with spare parts, but they can also help you solve any needs that arise.

We maintain your machines and your business.

11

Best solution for you.There is often a difference in the terms and conditions between a large contractor with its own workshop, and a small business with a handful of employees. However, factors such as product knowledge, efficient operation, maintenance and accessibility are always key aspects of your company’s performance, whether you are a large contractor or a small business owner. Together with your distributor, you select the business solution that suits your company best.

Advice on financing.Your distributor can also help you with different investment options and can calculate service costs, product life, and other factors based exclusively on your company’s particular requirements. You can also get tips and advice on appropriate financial solutions.

12

13

Our brushcutter and trimmer range includes products for all conceivable needs and requirements. Everything from high-performance machines for really tough clearing work, to effective edgers and smart combi tools. They all have one thing in common: They are powerful and tireless machines designed for demanding applications in lawn care over many years.

Brushcutters and trimmers.General features 14

Husqvarna 555RXT / 545RXT / 545RX 16

Husqvarna 535RXT / 535RX / 327RX / 327RDX 17

Husqvarna 327LDX 18

Husqvarna 324RX 19

Harness 20

Cutting equipment guide 22

Technical specifications 24

14

those who are looking for strength, flexibility and effectiveness should invest in one of our brushcutters or trimmers.

Features shown are available on applicable models.

Ergonomically designed harnesses with wide, padded shoulder straps and strain relieving waist belt (available on certain models).

X-Torq – more power from less fuel.

Low Vib – effective vibration damping.

Superb manoeuvrability.

Robust and reliable design.

Developed for demanding applications through hard-wearing construction including a three-piece forged crankshaft and surface treated cylinder barrels.

15

Comfortable and ergonomic work through optimally angled handlebars and comfort handle.

The X-Torq engine technology gives increased torque for rapid acceleration – as well as up to 20 % less fuel consumption and up to 75 % lower exhaust emissions.

16

Husqvarna 555RXt / 545RXt / 545RX.Powerful, robust brushcutters developed for extremely demanding clearance work and long work shifts. They have been designed to give perfect working ergonomics. The length of the shaft, height and angle of the offset post and the angle of the handlebars have been developed and tested to suit the needs of most users. In addition, it is easy to make personal settings for the machine and harness.

■■ The X-Torq engine technology gives high torque as well as up to 20 % less fuel consumption and up to 75 % lower exhaust emissions.

■■ Effective vibration damping (Low Vib) and comfort handle make for more comfortable working conditions.

■■ The ergonomic harnesses Balance XT™ (for 555RXT and 545RXT) and Balance X™ (545RX) are included.

■■ Smart Start is a function that contributes to quick starts by up to 40 % reduced resistance in the starter cord.

TECHNICAL SPECIFICATIONS 555RXT 545RXT 545RX

Cylinder displacement, cm³ 53.3 45.7 45.7

Power output, kW / hp* 2.8 / 3.8 2.1 / 2.8 2.1 / 2.8

Equivalent vibration level (a hv , eq ) left / right handle, m / s² 1.5 / 1.6 2.1 / 2.4 3 / 3.6

Weight (excl. cutting equipment), kg 9.2 8.2 8.4

* Read more on engine power rating at page 24.

The X-Torq engine technology gives extra torque, up to 20 % less fuel consumption and up to 75 % lower exhaust emissions.

Low Vib effectively reduces vibrations in the handles, which relieves the stress on the arms and hands of the user.

The brushcutters have ergonomic harnesses with wide shoulder straps and strain relieving waist belts.

17

Husqvarna 535RXt / 535RX / 327RX / 327RDX.Reliable, easy to start and ergonomic brushcutters. Effective machines for normal grass clearing that combines high performance and high capacity with low fuel consumption and very low emissions. All models have been superbly engineered for a long service life.

■■ The X-Torq engine technology gives high torque as well as up to 20 % less fuel consumption and up to 75 % lower exhaust emissions (does not apply to 327RX and 327RDX).

■■ Effective vibration damping (Low Vib) and comfort handle gives a more comfortable working conditions.

■■ Ergonomic harness included.

■■ Smart Start is a function that contributes to quick starts by up to 40 % reduced resistance in the starter cord (does not apply to 535RXT and 535RX).

■■ The 327RDX has a two-part shaft which facilitates transport and storage.

TECHNICAL SPECIFICATIONS 535RXT 535RX 327RX 327RDX

Cylinder displacement, cm³ 34.6 34.6 24.5 24.5

Power output, kW / hp* 1.6 / 2.2 1.6 / 2.2 0.9 / 1.2 0.9 / 1.2

Equivalent vibration level (a hv , eq ) left / right handle, m / s² 2.5 / 2.4 3.4 / 4.1 2.4 / 1.9 2.4 / 1.9

Weight (excl. cutting equipment), kg 6.2 6.1 5.4 5.6


The combi-guard can be used together with both grass blade and trimmer head.

The high offset post produces a raised position and increased legroom when working on slopes.

Smart Start means that the traction in the starter cord is reduced by up to 40 %, which makes the brushcutter easy to start.

18

Husqvarna 327LDX.Robust, reliable trimmer that combines low weight with high performance. A wide range of accessories makes it a versatile machine.

■■ Smart Start means that the traction in the starter cord is reduced by up to 40 %, which makes the trimmers easy to start.

■■ Accessories for grass trimming, hedge trimming, tree pruning, sweeping, cultivating and edging.

■■ A two-part shaft facilitates transsport and storage.

The trimmer is easy to store and transport thanks to the two part shaft.

TECHNICAL SPECIFICATIONS 327LDX

Cylinder displacement, cm³ 24.5

Power output, kW / hp* 0.9 / 1.2

Equivalent vibration level (a hv , eq ) left / right handle, m / s² 2.9 / 3.4

Weight (excl. cutting equipment), kg 5.1


Sweeper Edger Tiller Pole saw Hedge trimmers

Angled handles with soft grip for efficient and comfortable work.


19

Husqvarna 324RX.Effective, easy to start and versatile brushcutter that can handle everything from trimming of grass edges to clearing tall grass. The asymmetric handle and the comfortable harness contribute to the simple handling of the brushcutter.

■■ Fitted with 4 stroke engine which runs exclusively on petrol.

■■ Combi guard for both trimmer heads and grass blades included.


■■ Balance 35 harness included.

TECHNICAL SPECIFICATIONS 324RX

Cylinder displacement, cm³ 25


Equivalent vibration level (a hv , eq ) left / right handle, m / s² 2.7 / 2.2

Weight (excl. cutting equipment), kg 5.5


The combi guard can be used together with both grass blade and trimmer head.


Balance 35 harness that reduces stress on shoulders and arms in all working positions.

20

A harness will improve working movement, enable you to manage your job in a safer way and take the strain from your body. That’s why we have spent time researching and developing harnesses to help you get the most out of your machine. Using a machine the right way also makes a difference to how it handles, and the results you experience. Our ergonomically designed harnesses

effectively spread the machine’s weight to maximise balance, making the machine feel lighter, and manouverable and less strenuous to work with. For more information, visit our website. You’ll find comparison charts, videos and our full range of harnesses.

Our ergonomic harnesses spread the load and help you move in the right manner.

Wide ventilated back plate. Settings over and under the chest to fit both men and women.

Weight distribution from shoulders to hips.

21

Flexible shoulder section and individual height adjustment.

Shock-absorbing, travelling hip pad. Easy-access quick release in case of an emergency.

BALANCE XT™ BALANCE X™ BALANCE 35 / 55

Wide, ventilated back plate

Quick set adjustment points

Padded, ergonomics straps

Shock-absorbing hip pad

Flexible hip pad suspension ―

Wide, supporting hip belt ―

Quick release on hip pad ―

Grass and forest mode ―

Height adjustable back plate ― ―

Flexible shoulder section ― ―

Settings for men and women ― ―

= Available ― = Not available

Balance Xt™.Our most advanced harness with several unique features such as settings for men and women, and a pivoting shoulder section. Gives you an outstanding weight distribution between the shoulders, between the chest and back. Also, it distributes load from the shoulders to the hips.

Balance X™.Delivers great relief to your upper body and arms thanks to outstanding weight distribution between the shoulders, between the chest and back, and from the shoulders to hips.

Balance 55 / Balance 35.Ergonomic harnesses that distribute the load optimally between your shoulders, chest and back.

22

Cutting equipment guide.MODEL GRASS COURSE GRASS BUSHES AND TREES

122C

128C

128L

323L / 327LS / 224L / 326LS

324LDX / 327LDX

122LD

128LDX

535LS

128RJ

233RJ / 327RJX

535RJ

128R

323R / 323RII / 324RX / 233R327RX / 327RDX / 133R / 226R535RX / 535RXT / 336FR235R / 135R

345FR / 545RX / 545RXT

555RXT

343F / 545FX / 545FXT

555FX / 555FXT

555FRM

143R / 153R

143RII / 241R S. Am / 236R

243RJ / 253RJ / 253RB / 243R / 253R

TRIMMER GUARDS SAW BLADE GUARDS KITS COMBINATION

GUARDSPLANT PROT.

GUARDS BLADE GUARDS SUPPORT CUPS

23

Cutting equipment guide.MODEL GRASS COURSE GRASS BUSHES AND TREES

122C

128C

128L

323L / 327LS / 224L / 326LS

324LDX / 327LDX

122LD

128LDX

535LS

128RJ

233RJ / 327RJX

535RJ

128R

323R / 323RII / 324RX / 233R327RX / 327RDX / 133R / 226R535RX / 535RXT / 336FR235R / 135R

345FR / 545RX / 545RXT

555RXT

343F / 545FX / 545FXT

555FX / 555FXT

555FRM

143R / 153R

143RII / 241R S. Am / 236R

243RJ / 253RJ / 253RB / 243R / 253R

TRIMMER GUARDS SAW BLADE GUARDS KITS COMBINATION

GUARDSPLANT PROT.

GUARDS BLADE GUARDS SUPPORT CUPS ATTACHMENTS CUTTING EQUIPMENTS

555RXT 545RXT 545RX 535RXT 535RX 327RX 327RDX 327LDX 324RX

Cylinder displacement, cm³ 53.3 45.7 45.7 34.6 34.6 24.5 24.5 24.5 25

Cylinder bore, mm 45 42 42 38 38 34 34 34 35

Cylinder stroke, mm 33.5 33 33 30.5 30.5 27 27 27 26

Power output, kW / hp 2.8 / 3.8 2.1 / 2.8 2.1 / 2.8 1.6 / 2.2 1.6 / 2.2 0.9 / 1.2 0.9 / 1.2 0.9 / 1.2 0.8 / 1.1

Sound pressure level at operators ear, dB(A) * 101 100 101 96 95 95 95 94 89

Guaranteed sound power level, L WA dB(A) 120 115 115 113 113 110 110 110 106

Equivalent vibration level (a hv , eq ) left / right handle, m / s²* * 1.5 / 1.6 2.1 / 2.4 3 / 3.6 2.5 / 2.4 3.4 / 4.1 2.4 / 1.9 2.4 / 1.9 2.9 / 3.4 2.7 / 2.2

Maximum power speed, rpm 9000 9000 9000 8400 8400 8400 8400 8400 7000

Maximum recommended engine speed, rpm 12000 12500 12500 11500 11500 11700 11700 11700 11000

Carburettor Walbro WT Walbro Walbro Zama C1Q Zama C1Q Zama C1Q Zama C1Q Zama C1Q Walbro

Fuel tank volume, litres 1.1 0.9 0.9 0.6 0.6 0.5 0.5 0.5 0.5

Fuel consumption (g / KWh) 480 450 450 480 480 550 550 550 510

Ignition system Walbro MB SEM CD SEM Walbro CD Walbro CD Walbro MB Walbro MB Walbro MB Ikeda

Idling speed, rpm 2800 2800 2800 2900 2900 2700 2700 2700 3100

Exhaust emissions (CO average), g / kWh 350 380 380 196 196 153 153 153 399

Exhaust emissions (HC average), g / kWh 61 47 47 32 32 29 29 29 15

Exhaust emissions (NOx average), g / kWh 2.4 1 1 2 2 2.9 2.9 2.9 3.3

Gear ratio 1:1.46 1:1.4 1:1.4 1:1.4 1:1.4 1:1.46 1:1.46 1:1.46 1:1.46

Drive gear angle 35 ° 35 ° 35 ° 35 ° 35 ° 30 ° 30 ° 30 ° 30 °

OEM Trimmer head T55X M12 T45X M12 T45X M12 T35X M12 T35 M12 T35 M10 T35 M10 T35 M10 T35 M10

OEM Grass blade Multi 350-3 Multi 300-3 Multi 300-3 Multi 300-3 Multi 300-3 Grass 255-4 Grass 255-4 ― Grass 255-4

OEM Harness Balance XT™ Balance XT™ Balance X™ Balance X™ Balance 35 Balance 35 Balance 35 ― Balance 35

Weight (excl. cutting equipment), kg 9.2 8.2 8.4 6.2 6.1 5.4 5.6 5.1 5.5

Tube length, mm 1483 1483 1483 1483 1483 1483 1483 1483 1483

Tube diameter, mm 35 32 32 28 28 24 24 24 24

* Equivalent sound pressure level, as per ISO 22868, is calculated as the time-weighted energy sum for the sound pressure levels at various operational states. Typical variation for equivalent sound pressure level is a standard deviation of 1 dB(A). ** Equivalent vibration level, as per ISO 22867, is calculated as the time-weighted energy sum for the vibration levels at various operational states. The data presented for equivalent vibration level has a typical variation (standard deviation) of 1 m / s². level has a typical variation (standard deviation) of 1 m / s².

24

technical specifications for brushcutters and trimmers.

NOMINAL POWERA new machinery directive (2006 / 42 / EC) came into force on January 1, 2010, requiring manufacturers to declare the nominal power of engines, in kilowatts (kW). The power rating of the engines indicated is the average net power output during a normal working situations and fulfilling applicable noise regulations (at specified rpm) of a typical production engine for the engine model measured to SAE standard J 1349 / ISO 1585. Mass production engines may differ from this value. Actual power output for the engine installed in the final machine will depend on the operating speed, environmental conditions and other variables.

555RXT 545RXT 545RX 535RXT 535RX 327RX 327RDX 327LDX 324RX

Cylinder displacement, cm³ 53.3 45.7 45.7 34.6 34.6 24.5 24.5 24.5 25

Cylinder bore, mm 45 42 42 38 38 34 34 34 35

Cylinder stroke, mm 33.5 33 33 30.5 30.5 27 27 27 26

Power output, kW / hp 2.8 / 3.8 2.1 / 2.8 2.1 / 2.8 1.6 / 2.2 1.6 / 2.2 0.9 / 1.2 0.9 / 1.2 0.9 / 1.2 0.8 / 1.1

Sound pressure level at operators ear, dB(A) * 101 100 101 96 95 95 95 94 89


Equivalent vibration level (a hv , eq ) left / right handle, m / s²* * 1.5 / 1.6 2.1 / 2.4 3 / 3.6 2.5 / 2.4 3.4 / 4.1 2.4 / 1.9 2.4 / 1.9 2.9 / 3.4 2.7 / 2.2



Carburettor Walbro WT Walbro Walbro Zama C1Q Zama C1Q Zama C1Q Zama C1Q Zama C1Q Walbro



Ignition system Walbro MB SEM CD SEM Walbro CD Walbro CD Walbro MB Walbro MB Walbro MB Ikeda

Idling speed, rpm 2800 2800 2800 2900 2900 2700 2700 2700 3100


Exhaust emissions (HC average), g / kWh 61 47 47 32 32 29 29 29 15

Exhaust emissions (NOx average), g / kWh 2.4 1 1 2 2 2.9 2.9 2.9 3.3

Gear ratio 1:1.46 1:1.4 1:1.4 1:1.4 1:1.4 1:1.46 1:1.46 1:1.46 1:1.46

Drive gear angle 35 ° 35 ° 35 ° 35 ° 35 ° 30 ° 30 ° 30 ° 30 °

OEM Trimmer head T55X M12 T45X M12 T45X M12 T35X M12 T35 M12 T35 M10 T35 M10 T35 M10 T35 M10

OEM Grass blade Multi 350-3 Multi 300-3 Multi 300-3 Multi 300-3 Multi 300-3 Grass 255-4 Grass 255-4 ― Grass 255-4

OEM Harness Balance XT™ Balance XT™ Balance X™ Balance X™ Balance 35 Balance 35 Balance 35 ― Balance 35

Weight (excl. cutting equipment), kg 9.2 8.2 8.4 6.2 6.1 5.4 5.6 5.1 5.5

Tube length, mm 1483 1483 1483 1483 1483 1483 1483 1483 1483

Tube diameter, mm 35 32 32 28 28 24 24 24 24

* Equivalent sound pressure level, as per ISO 22868, is calculated as the time-weighted energy sum for the sound pressure levels at various operational states. Typical variation for equivalent sound pressure level is a standard deviation of 1 dB(A). ** Equivalent vibration level, as per ISO 22867, is calculated as the time-weighted energy sum for the vibration levels at various operational states. The data presented for equivalent vibration level has a typical variation (standard deviation) of 1 m / s². level has a typical variation (standard deviation) of 1 m / s².

25

technical specifications for brushcutters and trimmers.

26

27

When developing our hedge trimmers, in addition to performance, we focus on functionality and ergonomics. Put another way: cutting results are crucial but the hedge trimmers must also be easy to handle without any major stress. You can choose from single and double edged hedge trimmers with a range of blade lengths. Both traditional trimmers and pole hedge trimmers. All models have compact, well-balanced designs and low weight, which creates the best conceivable conditions for effective hedge trimming.

Hedge trimmers.General features 28

Husqvarna 226HS99S / 226HS75S 30

Husqvarna 226HD75S / 226HD60S 30

Husqvarna 325HD75X / 325HD60X 31

Husqvarna 327HDA65X / 327HE4X / 327HE3X 31


28

Smart solutions that get you to drop your shoulders and raise your eyebrows.


Impressively high performance and blade speeds make for optimum cutting results.

The hedge trimmers are engineered for effective and comfortable working. Many models have pivoting handles which is an example of a function that facilitates the trimming of the top and sides of your hedge.

Hard-wearing special components and blades of high-quality steel contribute to a long working life – even in tough conditions.

29

Ergonomic design.

Angleable cutting blade.

Excellent balance.

With its long reach, the pole hedge trimmers are easy on the back and shoulders when cutting both high and low hedges.

The hedge trimmers are very well balanced thanks to the engine serving as a balance to the cutting blade.

Remote control makes it easy to angle the cutting blades when working.

The Balance Flex™ harness makes the work less tiring and more effective.

TECHNICAL SPECIFICATIONS 226HS99S 226HS75S

Displacement, cm³ 23.6 23.6

Power, kW / hp* 0.85 / 1.1 0.85 / 1.1

Knife length, mm 1080 750

Equivalent vibration level (a hv , eq ) front / rear handle, m / s²

5.6 / 3.3 7.7 / 3.2

Weight, kg 6 5.6


TECHNICAL SPECIFICATIONS 226HD75S 226HD60S


Power, kW / hp* 0.85 / 1.1 0.85 / 1.1


Equivalent vibration level (a hv , eq ) front / rear handle, m / s²*

2.5 / 2.1 1.8 / 1.5

Weight, kg 5.9 5.7


30

Husqvarna 226HS99S / 226HS75S.

Husqvarna 226HD75S / 226HD60S.

Single-edged, exceptionally well-balanced and rugged hedge trimmers available in two blade lengths. Robust design and superb cutting performance allow for effective working for many years.

■■ The X-Torq engine technology gives a high torque and up to 20 % less fuel consumption as well as up to 75 % lower fuel exhaust emissions.

■■ Robust gear housing, hard-wearing gear components and top-calibre blade assembly make for long durability in tough working conditions.

Extremely well-balanced, robust and double-edged hedge trimmers that have been engineered to handle tough applications over many years.

■■ The X-Torq engine technology gives a high torque and up to 20 % less fuel consumption as well as up to 75 % lower fuel exhaust emissions.

■■ Robust gear housing, hard-wearing gear components and top-calibre blade assembly make for long durability in tough working conditions.

TECHNICAL SPECIFICATIONS 325HD75X 325HD60X


Power, kW / hp* 0.7 / 1.0 0.7 / 1.0



2.8 / 2.8 2.4 / 3.8

Weight, kg 5.9 5.6


TECHNICAL SPECIFICATIONS 327HDA65X 327HE4X 327HE3X

Displacement, cm³ 24.5 24.5 24.5

Power, kW / hp* 0.9 / 1.2 0.9 / 1.2 0.9 / 1.2

Knife length, mm 650 550 550


4.2 / 4.2 5.4 / 4.4 4.5 / 5.0

Weight, kg 6.2 6.6 6.5

Length, cm 157 234 174


31

Husqvarna 325HD75X / 325HD60X.

Husqvarna 327HDA65X / 327HE4X / 327HE3X.

Effective and easy to use machines with double edged cutting blade. The hedge trimmers are permeated by state of the art technology and ergonomic solutions, with vibration damping handles being the perfect example of this. The cutting lengths are 73.5 and 60 cm respectively.

■■ Ergonomic and comfortable handling through effective vibration damping (Low Vib) and comfort handle.

■■ The rear handle can be angled to facilitate cutting of the top and sides of the hedge.

■■ Compact design and low weight make the hedge trimmers easy to use.

■■ High blade speed for the best cutting results.

The 327HDA65X is a lightweight and unique double edged hedge trimmer. Primarily through the ergonomic design and the angleable cutting blade. The 327HE4X and 327HE3X are easy to handle pole hedge trimmers which reach up to 4 and 3 m respectively, which allows trimming of both high and low hedges.

■■ The cutting blades are angleable, which facilitates work (327HE3X and 327HE4X have remote setting of the blades).

■■ A long reach hedge trimmer makes working easy on the back and shoulders.

■■ The engine serves as a balance to the cutting blade which makes the machine extremely well-balanced.

■■ The engines location also helps direct exhaust fumes away from the user.

■■ For enhanced comfort and more effective work, the harness Balance Flex™ is available as an accessory for 327HE4X.

226HS99S 226HS75S 226HD75S 226HD60S 325HD75X 325HD60X 327HDA65X 327HE4X 327HE3X

Cylinder displacement, cm³ 23.6 23.6 23.6 23.6 24.5 24.5 24.5 24.5 24.5

Cylinder bore, mm 32 32 34 34 34 34 34 34 34

Cylinder stroke, mm 27 27 26 26 27 27 27 27 27

Power, kW / hp 0.85 / 1.1 0.85 / 1.1 0.85 / 1.1 0.85 / 1.1 0.7 / 1.0 0.7 / 1.0 0.9 / 1.2 0.9 / 1.2 0.9 / 1.2

Sound pressure level at operators ear, min / max, dB(A) * 91 92 91 / 91 91 / 91 99 / 99 100 / 100 94 / 94 91 / 91 93 / 93


Equivalent vibration level (a hv , eq ) front / rear handle, m / s² ** 5.6 / 3.3 7.7 / 3.2 2.5 / 2.1 1.8 / 1.5 2.8 / 2.8 2.4 / 3.8 4.2 / 4.2 5.4 / 4.4 4.5 / 5.0



Carburettor Walbro Walbro Walbro Walbro Zama C1Q Zama C1Q Zama C1Q Zama C1Q Zama C1Q




Exhaust emissions (HC average), g / kWh 47.2 47.2 54.7 54.7 121 121 121 44 44

Exhaust emissions (NOx average), g / kWh 1.7 1.7 0.6 0.6 1.2 1.2 1.2 2 2

Gear ratio 5.11:1 5.11:1 5.11:1 5.11:1 4.9:1 4.9:1 4.78:1 4.78:1 4.78:1

Knife Length, cm 108 75 75 60 73.5 60 65 55 55

Teeth opening, mm 27.5 27.5 28 28 26 26 29 29 29

Recommended maximum twig diameter, mm 22 22 22 22 22 22 20 20 20

Cutting speed, cut / min 4100 4100 4100 4100 4695 4695 4184 4184 4184

Weight, kg 6 5.6 5.9 5.7 5.9 5.6 6.2 6.6 6.5

Length, cm ― ― ― ― ― ― 157 234 174

― = Not available * Equivalent sound pressure level, as per ISO 22868, is calculated as the time-weighted energy sum for the sound pressure levels at various operational states. Typical variation for equivalent sound pressure level is a standard deviation of 1 dB(A). ** Equivalent vibration level, as per ISO 22867, is calculated as the time-weighted energy sum for the vibration levels at various operational states. The data presented for equivalent vibration level has a typical variation (standard deviation) of 1 m / s².

32

technical specifications for hedge trimmers.


226HS99S 226HS75S 226HD75S 226HD60S 325HD75X 325HD60X 327HDA65X 327HE4X 327HE3X

Cylinder displacement, cm³ 23.6 23.6 23.6 23.6 24.5 24.5 24.5 24.5 24.5

Cylinder bore, mm 32 32 34 34 34 34 34 34 34

Cylinder stroke, mm 27 27 26 26 27 27 27 27 27

Power, kW / hp 0.85 / 1.1 0.85 / 1.1 0.85 / 1.1 0.85 / 1.1 0.7 / 1.0 0.7 / 1.0 0.9 / 1.2 0.9 / 1.2 0.9 / 1.2

Sound pressure level at operators ear, min / max, dB(A) * 91 92 91 / 91 91 / 91 99 / 99 100 / 100 94 / 94 91 / 91 93 / 93


Equivalent vibration level (a hv , eq ) front / rear handle, m / s² ** 5.6 / 3.3 7.7 / 3.2 2.5 / 2.1 1.8 / 1.5 2.8 / 2.8 2.4 / 3.8 4.2 / 4.2 5.4 / 4.4 4.5 / 5.0



Carburettor Walbro Walbro Walbro Walbro Zama C1Q Zama C1Q Zama C1Q Zama C1Q Zama C1Q




Exhaust emissions (HC average), g / kWh 47.2 47.2 54.7 54.7 121 121 121 44 44

Exhaust emissions (NOx average), g / kWh 1.7 1.7 0.6 0.6 1.2 1.2 1.2 2 2

Gear ratio 5.11:1 5.11:1 5.11:1 5.11:1 4.9:1 4.9:1 4.78:1 4.78:1 4.78:1

Knife Length, cm 108 75 75 60 73.5 60 65 55 55

Teeth opening, mm 27.5 27.5 28 28 26 26 29 29 29

Recommended maximum twig diameter, mm 22 22 22 22 22 22 20 20 20

Cutting speed, cut / min 4100 4100 4100 4100 4695 4695 4184 4184 4184

Weight, kg 6 5.6 5.9 5.7 5.9 5.6 6.2 6.6 6.5

Length, cm ― ― ― ― ― ― 157 234 174

― = Not available * Equivalent sound pressure level, as per ISO 22868, is calculated as the time-weighted energy sum for the sound pressure levels at various operational states. Typical variation for equivalent sound pressure level is a standard deviation of 1 dB(A). ** Equivalent vibration level, as per ISO 22867, is calculated as the time-weighted energy sum for the vibration levels at various operational states. The data presented for equivalent vibration level has a typical variation (standard deviation) of 1 m / s².

33

technical specifications for hedge trimmers.

34

35

You can read all about our blowers in the following pages. High-capacity working implements that in certain respects are unrivalled on the market. For example, the 356BTX, the quietest blower in the world, shown here in the picture. The range consists of both backpack and hand-held blowers with different features depending on the application. Regardless of the choice of blower, you will always get an easy-to-use, ergonomic working implement with a high capacity.

Blowers.General features 36

Husqvarna 380BTS / 370BTS 38

Husqvarna 356BTX 39

Husqvarna 130BT 40


36

Ergonomic harnesses with wide, padded shoulder straps and strain relieving waist belt provide the best possible comfort even during long work shifts.

Long-life components and specially developed air filters create the optimal conditions for problem-free application and increased operating times.

technology that works for you and the environment.

Powerful air flows.

High air speeds.

Labour-saving, comfortable harnesses.

X-Torq – more power from less fuel.


37

The side-mounted handle counteracts the reaction forces in the tube and gives maximum control and the best ergonomics.

A unique fan design contributes to high air speed and powerful air flows.

The majority of the blowers have our advanced engine technology X-Torq which means high performance combined with up to 20 % less fuel consumption as well as up to 75 % lower exhaust emissions.

38

Husqvarna 380BtS / 370BtS.

X-Torq gives extra torque, up to 20 % less fuel consumption and up to 75 % lower exhaust emissions.

The 2-stage intake air filtration system ensures long operation periods even in dusty conditions.

The handles can be angled and have rubber inserts for a stable, comfortable grip.

High-capacity, backpack blowers that generate powerful air flows and high speeds. Their robust designs make them reliable working implements over many years. Both are ergonomically designed with comfort handles and comfortable harnesses.

■■ The X-Torq engine technology gives more performance and less fuel consumption and exhaust emissions.

■■ Unique fan design gives high blowing capacity.■■ Long-life components and specially developed air filters make for problem-free application and increased operating times.

■■ Ergonomic harnesses with padded shoulder straps and strain relieving waist belts.

■■ Comfort handle that can be easily angled where necessary.

TECHNICAL SPECIFICATIONS 380BTS 370BTS


Power, kW / hp* 3.3 / 4.4 2.6 / 3.5

Sound pressure level at operators ear, dB(A) 100 95

Noise level 15 m ANSI B 175.2 77 76

Max air speed, m / s 89.86 88.51

Max air flow fan housing, m³ / min 25.9 21

Max air flow nozzle, m³ / min 19.4 16

Weight, kg 13.2 12.02


39

Husqvarna 356BtX.The world’s quietest, petrol-driven blower due to the engine being fully enclosed and effectively insulated. A high-performance blower with powerful air flow and high air speed – perfect for use in public environments where there are demands for the least possible impact on the surroundings.

■■ Enclosed design makes the blower silent and durable. Unique fan design generates a high blowing capacity.

■■ Air Injection™ contributes to efficient air filtration and problem-free operation.

■■ Active vibration damping (Low Vib) and comfort handle that can be angled.

■■ Engine housing with snap locks facilitate accessibility for maintenance.

■■ Ergonomic harness for the best strain relief and comfort.

TECHNICAL SPECIFICATIONS 356BTX

Displacement, cm³ 51.7

Power, kW / hp* 2.4 / 3.2

Sound pressure level at operators ear, dB(A) 88

Noise level 15 m ANSI B 175.2 64

Max air speed, m / s 79.13

Max air flow fan housing, m³ / min 21.7

Max air flow nozzle, m³ / min 13.4

Weight, kg 10.4


Exhaust emissions are below current and planned levels.

Comfortable, ventilated and load reducing harness with hip belt and wide shoulder straps.

Effective noise dampening with a gentler tone. The engine, fan housing and insulation reduce noise dramatically.

40

Husqvarna 130Bt.Small, compact and effective blower with high blowing capacity. The blower has the same robust design and ergonomic shape as the larger models.

■■ The X-Torq engine technology gives more performance and less fuel consumption and exhaust emissions.

■■ Unique fan design gives high blowing capacity.■■ Ergonomic harnesses with wide, padded shoulder straps. ■■ Comfort handle that can be easily angled where necessary.

TECHNICAL SPECIFICATIONS 130BT

Displacement, cm³ 29.5

Power, kW / hp* 0.96 / 1.3

Sound pressure level at operators ear, dB(A) 94

Noise level 15 m ANSI B 175.2 69

Max air speed, m / s 64.8

Max air flow fan housing, m³ / min 12.2

Max air flow nozzle, m³ / min 10.2

Weight, kg 6.7


X-Torq gives extra torque, up to 20 % less fuelconsumption and up to 75 % lower exhaustemissions.

Ergonomic harness for good strain relief on shoulders.

The handle is comfortable and can be easily angled.

380BTS 370BTS 356BTX 130BT


Cylinder bore, mm 50 47.5 44 38

Cylinder stroke, mm 36.6 36.6 34 26

Power, kW / hp 3.3 / 4.4 2.6 / 3.5 2.4 / 3.2 0.96 / 1.3

Sound pressure level at operators ear, dB(A)* 100 95 88 94

Noise level 15 m ANSI B 175.2 77 76 64 69

Guaranteed sound power level, L WA dB(A) 110 110 100 102

Equivalent vibration level (a hv , eq ) right handle, m / s²* * 3.4 3.6 3.9 2.5

Maximum power speed, rpm 8000 7250 6000 8000

Carburettor Diaphragm Rotary valve Zama EL27 Rotary valve

Fuel tank volume, litres 2.13 1.75 1.5 0.9

Fuel consumption, g / kWh 403 382 400 392

Idling speed, rpm 2000 2000 2300 3000

Air flow in housing, m³ / min 25.9 21 21.7 12.2

Air flow in pipe, m³ / min 19.4 16 13.4 10.2

Air Speed, m / s 89.86 88.51 79.13 64.82

Exhaust emissions (CO average), g / kWh 536 536 144 536

Exhaust emissions (HC+NOx average), g / kWh 72 62 49 56

OEM Harness Integrated Integrated Integrated Integrated

OEM Nozzle type Round Round Round + Flat Round

Weight, kg 13.2 12.02 10.4 6.7

* Equivalent sound pressure level, as per ISO 22868, is calculated as the time-weighted energy sum for the sound pressure levels at various operational states. Typical variation for equivalent sound pressure level is a standard deviation of 1 dB(A). ** Equivalent vibration level, as per ISO 22867, is calculated as the time-weighted energy sum for the vibration levels at various operational states. The data presented for equivalent vibration level has a typical variation (standard deviation) of 1 m / s².

41

technical specifications for blowers.


42

43

Our chainsaws are robust, hard-wearing and reliable machines with a high level of performance. At the same time they are compact, impressively light and have a number of smart functions. All of the above characterises can also be found in our range of power cutters. The entire range is made up of versatile products that help you to get the job done quickly and with outstanding precision.

Chainsaws and power cutters.General features – chainsaws 44

Husqvarna T540 XP ® 46

Husqvarna T435 46

Husqvarna 327P5X / 327P4 47

Husqvarna 327PT5S 47

Husqvarna 339 XP ® 48

Husqvarna 346 XP ® / 353 48



Recommendation guide 50


General features – power cutters 52

Husqvarna K 1260 54

Husqvarna K 970 54

Husqvarna K 760 55

Husqvarna K 3000 Wet 55

Husqvarna MT 85 / MT 65 / MT 15 + 56

Husqvarna AS 12 / AS 35 + / AS 45 + / AS 65 + / AS 85 + 56

Accessories for handheld power cutters 57


44

Compact designs and low weight for effective sawing at a high level.

All saws feature state-of-the-art engine technology, which means high performance and low fuel consumption.

Compact design and low weight make the saws easy to manoeuvre.

The ergonomic harness Balance Flex™ provides maximum relief when working with pole saws.


Rapid acceleration.

Many safety features.

Smart functions.

Excellent manoeuvrability.

Ergonomic and comfortable.

45

The compact cutting heads of the pole saws create excellent conditions for sawing in dense vegetation.

Belt and rope eyelets make work easier and more efficient.

Side-mounted chain tensioner that requires no tools.

Ergonomic handles with effective vibration damping (Low Vib) make the saws comfortable to use.

TECHNICAL SPECIFICATIONS T540 XP®

Cylinder displacement, cm³ (37.7)

Power output, kW / hp* (1.8 / 2.4)

Recommended bar length min – max, cm / inch (30 – 40 / 12 – 16)

Weight (excluding cutting equipment), kg (3.6)

* Read more on engine power rating at page 51. ( Values obtained by our R&D department.)

TECHNICAL SPECIFICATIONS T435



Recommended bar length min – max, cm / inch 30 – 35 / 12–14

Weight (excluding cutting equipment), kg 3.4


46

Husqvarna t540 XP®. Husqvarna t435.Our new arborist saw with top handle for smooth and efficient working. The T435 is an easy-to-start saw with compact design and low weight. It gives you full power and rapid acceleration in all situations. The chainsaws are permeated by all of our latest ergonomic solutions.

■■ The X-Torq gives a high torque and up to 20 % less fuel consumption as well as up to 75 % lower exhaust emissions.

■■ The low weight makes the saw easy to lift and manoeuvre. ■■ For fast and easy chain adjustments simply use the side-mounted chain tensioner.

■■ The right hand guard is perforated to give you a better overview of the nose of the bar.


■■ You can remove the air filter cover without any tools which makes maintenance easy.

The ultimate arborist saw, based on a totally new concept. Featuring just what arborists want when selecting a saw: robust design, good balance, powerful engine and low weight. Plus, the T540 XP ® has several unique solutions to help you work efficiently and comfortably.

■■ Well-balanced, compact design, low weight and high centre of gravity make the saw extra manoeuvrable.

■■ Unique X-Torq engine technology delivers high torque, plus up to 20% less fuel consumption and up to 75% less emissions.

■■ The engine adjusts automatically for optimal operation, regardless of factors like temperature, humidity and fuel type (AutoTune™).

■■ The Air Injection™ system keeps the intake air clean, for longer service intervals, more even running and reduced wear.

■■ Efficient vibration dampening of the handles (LowVib) makes operation more comfortable – even on long shifts.

■■ Three different sized grips are included, to suit a wide range of users.

■■ Angled front handle for better grip and a natural work position.

■■ An extra eyelet means the saw can be attached to a harness, for easier climbing and handling while up a tree.

TECHNICAL SPECIFICATIONS 327P5X 327P4

Cylinder displacement, cm³ 24.5 24.5

Power output, kW / hp* 0.9 / 1.2 0.9 / 1.2

Recommended bar length, cm / inch 30 / 12 30 / 12

Total length, mm 3500 2400

Weight (excluding cutting equipment), kg 6.4 6.1


TECHNICAL SPECIFICATIONS 327PT5S



Recommended bar length min – max, cm / inch 25.5 – 30.5 / 10 – 12

Total length, mm 3970



47

Husqvarna 327P5X / 327P4. Husqvarna 327Pt5S.Robust, versatile and effective pole saws that give a range of 4 to 5 metres respectively. The saws offer rapid acceleration and the compact design of the cutting heads also enable the saws to operate in dense vegetation. They are lightweight saws and the engines are located at the rear, which creates a good balance and directs the exhaust fumes away from the user.


■■ Ergonomic handle makes the saw comfortable to operate.

■■ Side-mounted chain tensioner for easy, tool-less chain adjustments.

■■ Rear impact guard protects the tank and starter (goes for 327P5X).

■■ The unique, ergonomic harness Balance Flex™ helps make your work comfortable (327P5X).

■■ The two-part shaft facilitates tranport and storage (327P5X).

Lightweight, well-balanced and effective pole saw that gives a range of 5 m. The saw offers rapid acceleration and the compact design of the cutting head also enables it to operate in dense vegetation. The engine is located at the rear, which creates a good balance and directs the exhaust fumes away from the user.

■■ Adjustable working height thanks to the telescopic tube.■■ The saw has the longest reach on the market.■■ The unique, ergonomic harness Balance Flex™ helps make your work comfortable.

■■ Commercial graded components for long durability in tough conditions.

TECHNICAL SPECIFICATIONS 339 XP®



Recommended bar length min – max, cm / inch 33 – 45 / 13 – 18



TECHNICAL SPECIFICATIONS 346 XP® 353



Recommended bar length min – max, cm / inch

33 – 50 / 13 – 20 33 – 50 / 13 – 20



48

Husqvarna 339 XP®. Husqvarna 346 XP® / 353.Saws with high-power, low weight, slim body and high centre of gravity that make them both powerful and easy to use. The wide power band makes these saws exceptionally versatile. They are available with our triple activated chain brake TrioBrake™, and are also provided with features like Smart Start for easy starting.

■■ Smart Start makes the machine start quickly. Resistance in the starter cord is reduced by up to 40 %.

■■ Air Injection™: centrifugal air cleaning system for reduced wear and longer operating time between filter cleanings.

■■ Sturdily built magnesium crankcase and forged three-piece crankshaft for maximum durability.

■■ Effective anti-vibration system (Low Vib) for comfort-able work.

■■ TrioBrake™ allows the chain brake to be activated either automatically by the inertia release mechanism or mechanically by your left or right hand.

■■ The 346 XP® is also available as 346 XP® G with efficient heating coils in the front and rear handle that make the saw more comfortable to use in cold and damp conditions.

A light, handy and manoeuvrable saw with high performance. Perfect for work with smaller dimensions.

■■ The narrow saw body, high centre of gravity and flat underside make the saws handy to work with.

■■ Sturdy rear handle with soft inlays provides good control and a comfortable grip.



■■ Forged three-piece crankshaft for maximum durability for the toughest applications.

■■ Easy-access fuel pump makes the saw easy to start. ■■ Side-mounted chain tensioner makes chain adjustment quick and easy.





33 – 50 / 13 – 20 33 – 50 / 13 – 20







38 – 71 / 15 – 28 38 – 71 / 15 – 28



49

Husqvarna 357 XP® / 359. Husqvarna 576 XP® / 570.Saws that combine high power and rapid acceleration with superior ergonomics (low vibration levels, for instance) and slim body constructions. They are light, reliable and effective saws for the widest variety of tasks.




■■ Angled front handle for better grip and natural working position.

■■ Sturdily built magnesium crankcase and forged three-piece crankshaft for maximum durability.

■■ Adjustable oil pump makes it easy to set the chain lubrication according to individual needs.


Advanced, high-performance, powerful saws for demanding use. High torque over a very wide rpm range, productivity boosting features, such as Smart Start and Air Injection™, and lower fuel costs make these saws an excellent choice.

■■ X-Torq delivers high torque and cuts fuel consumption by up to 20 % and cuts exhaust emissions up to 75 %.



■■ The engine adjusts automatically for optimal operation, regardless of factors like temperature, humidity and fuel type (AutoTune™).


Small bar mounting point Large bar mounting point

T42

5

327P

4 / 3

27P

5X / 3

27P

T5S

T43

5 / 3

34T

338

XP

® T

/ T54

0 X

P®

317

Ele

ctri

c / 3

21 E

lect

ric

240

e-se

ries

236

e-se

ries

339

XP

®

435

e-se

ries

/ 435

/ 440

e-s

erie

s

450

e-se

ries

/ 445

/ 445

e-s

erie

s

353

/ 346

XP

®

55 / 4

55 R

anch

er / 4

55 e

-ser

ies

Ran

cher

460

Ran

cher

/ 357

XP

® / 3

59

365

/ 372

XP

®

570

/ 576

XP

®

385

XP

®

390

XP

® * /

395

XP

®

3120

XP

®

Bar length inches / cm

Chain pitch inches

Gauge inches / cm

Product number

Drive links Type Product number

LAMINATED BAR WITH NOSE WHEEL

10 / 25 3 / 8 .050 / 1.3 505 89 16-40 40 H36 LowVib 501 84 21-40

12 / 30 3 / 8 .043 / 1.1 501 95 95-45 45 90SG 501 84 23-45

12 / 30 3 / 8 .050 / 1.3 501 95 92-45 45 H36 LowVib 501 84 21-45

14 / 36 3 / 8 .050 / 1.3 501 95 92-52 52 H36 LowVib 501 84 21-52

16 / 40 3 / 8 .050 / 1.3 501 95 92-56 56 H36 LowVib 501 84 21-56

13 / 33 .325 .050 / 1.3 508 92 61-56 56 H30 LowVib 501 84 06-56

15 / 38 .325 .050 / 1.3 508 92 61-64 64 H30 LowVib 501 84 06-64

16 / 40 .325 .050 / 1.3 508 92 61-66 66 H30 LowVib 501 84 06-66

18 / 45 .325 .050 / 1.3 508 92 61-72 72 H30 LowVib 501 84 06-72

20 / 50 .325 .050 / 1.3 508 92 61-80 80 H30 LowVib 501 84 06-80

13 / 33 .325 .058 / 1.5 508 91 21-56 56 H25 LowVib 501 84 04-56

15 / 38 .325 .058 / 1.5 508 91 21-64 64 H25 LowVib 501 84 04-64

16 / 40 .325 .058 / 1.5 508 91 21-66 66 H25 LowVib 501 84 04-66

18 / 45 .325 .058 / 1.5 508 91 21-72 72 H25 LowVib 501 84 04-72

20 / 50 .325 .058 / 1.5 508 91 21-80 80 H25 LowVib 501 84 04-80

15 / 38 3 / 8 .058 / 1.5 508 91 41-56 56 H42 LowVib 501 84 14-56

16 / 40 3 / 8 .058 / 1.5 508 91 41-60 60 H42 LowVib 501 84 14-60

18 / 45 3 / 8 .058 / 1.5 508 91 41-68 68 H42 LowVib 501 84 14-68

20 / 50 3 / 8 .058 / 1.5 510 15 35-72 72 H42 LowVib 501 84 14-72

15 / 38 3 / 8 .058 / 1.5 508 91 31-56 56 H42 LowVib 501 84 14-56

16 / 40 3 / 8 .058 / 1.5 508 91 31-60 60 H42 LowVib 501 84 14-60

18 / 45 3 / 8 .058 / 1.5 508 91 31-68 68 H42 LowVib 501 84 14-68

20 / 50 3 / 8 .058 / 1.5 544 28 55-72 72 H42 LowVib 501 84 14-72

LAMINATED BAR WITH NOSE WHEEL, TECHLITE™

12 / 30 3 / 8 .050 / 1.3 576 83 07-45 93 H37 LowVib 576 93 65-45

14 / 36 3 / 8 .050 / 1.3 576 83 07-52 93 H37 LowVib 576 93 65-52

16 / 36 3 / 8 .050 / 1.3 576 93 65-56 93 H37 LowVib 576 93 65-56

LAMINATED BAR WITH REPLACEABLE TIP, TECHLITE™

20 / 50 3 / 8 .058 / 1.5 544 90 25-72 72 H42 LowVib 501 84 14-72

28 / 72 3 / 8 .058 / 1.5 544 90 25-92 92 H42 LowVib 501 84 14-92

SOLID BAR WITH REPLACEABLE TIP

18 / 45 3 / 8 .058 / 1.5 501 95 77-68 68 H42 LowVib 501 84 14-68

20 / 50 3 / 8 .058 / 1.5 501 95 77-72 72 H42 LowVib 501 84 14-72

18 / 45 3 / 8 .058 / 1.5 501 95 69-68 68 H42 LowVib 501 84 14-68

20 / 50 3 / 8 .058 / 1.5 501 95 69-72 72 H42 LowVib 501 84 14-72

24 / 60 3 / 8 .058 / 1.5 501 95 69-84 84 H42 LowVib 501 84 14-84

28 / 72 3 / 8 .058 / 1.5 501 95 69-92 92 H42 LowVib 501 84 14-92

SOLID BAR

10 / 25 1 / 4 .050 / 1.3 505 89 15-60 60 H00 501 84 40-60

18 / 45 3 / 8 .058 / 1.5 501 95 80-68 68 H42 LowVib 501 84 14-68

20 / 50 3 / 8 .058 / 1.5 501 95 80-72 72 H42 LowVib 501 84 14-72

24 / 60 3 / 8 .058 / 1.5 501 95 80-84 84 H42 LowVib 501 84 14-84

28 / 72 3 / 8 .058 / 1.5 501 95 80-92 92 H42 LowVib 501 84 14-92

24 / 60 .404 .063 / 1.6 507 47 60-46 76 H64 501 84 31-76

28 / 72 .404 .063 / 1.6 501 58 96-01 84 H64 501 84 31-84

30 / 75 .404 .063 / 1.6 501 95 81-92 92 H64 501 84 31-92

36 / 90 .404 .063 / 1.6 501 95 81-04 104 H64 501 84 31-04

42 / 105 .404 .063 / 1.6 501 92 18-24 124 H64 501 84 31-24

* Solid bar with .404 chain pitch on 390 XP ® is optional on certain markets.

50

Recommendation guide.

T540 XP® T435 327P5X 327P4

Cylinder displacement, cm³ (37.7) 35.2 24.5 24.5

Power output, kW / hp (1.8 / 2.4) 1.5 / 2.0 0.9 / 1.2 0.9 / 1.2

Fuel tank volume, litres (0.35) 0.26 0.5 0.5

Oil tank volume, litres (0.2) 0.17 0.22 0.22

Oil pump type (Automatic) Automatic Automatic Automatic

Chain pitch, inch (3 / 8) 3 / 8 3 / 8 3 / 8

Recommended bar length, min – max, cm / inch (30 – 40 / 12 – 16) 30 – 35 / 12–14 30 / 12 30 / 12

Sound pressure level at operators ear, dB(A)* (103) 103 86 95

Guaranteed sound power level, L WA dB(A) (113) 114 105 105

Equivalent vibration level (a hv , eq ) front handle, m / s² * * (2.9) 4.1 3.4 2.9

Equivalent vibration level (a hv , eq ) rear handle, m / s² * * (3.1) 3.9 1.9 2.8

Weight (excl. cutting equipment), kg (3.6) 3.4 6.4 6.1

327PT5S 339 XP® 346 XP® 353


Power output, kW / hp 0.9 / 1.2 1.8 / 2.4 2.7 / 3.7 2.4 / 3.3


Oil tank volume, litres 0.22 0.16 0.28 0.28

Oil pump type Adjustable flow Adjustable flow Adjustable flow Adjustable flow

Chain pitch, inch 3 / 8 .325 .325 .325

Recommended bar length, min – max, cm / inch 25.5 – 30.5 / 10 – 12 33 – 45 / 13 – 18 33 – 50 / 13 – 20 33 – 50 / 13 – 20



Equivalent vibration level (a hv , eq ) front handle, m / s² * * 2.7 4.3 2.4 3.1

Equivalent vibration level (a hv , eq ) rear handle, m / s² * * 6.4 5.1 3.6 3.2


357 XP® 359 576 XP® 570


Power output, kW / hp 3.2 / 4.4 2.9 / 3.9 4.2 / 5.7 3.6 / 4.9


Oil tank volume, litres 0.38 0.38 0.37 0.37

Oil pump type Adjustable flow Adjustable flow Adjustable flow Adjustable flow

Chain pitch, inch .325 / 3 / 8 .325 3 / 8 3 / 8

Recommended bar length, min – max, cm / inch 33 – 50 / 13 – 20 33 – 50 / 13 – 20 38 – 71 / 15 – 28 38 – 71 / 15 – 28



Equivalent vibration level (a hv , eq ) front handle, m / s² * * 3.9 3.9 3.2 3.2

Equivalent vibration level (a hv , eq ) rear handle, m / s² * * 4.2 4.2 3.4 3.4


* Equivalent sound pressure level, as per ISO 22868, is calculated as the time-weighted energy sum for the sound pressurelevels at various operational states. Typical variation for equivalent sound pressure level is a standard deviation of 1 dB(A). ** Equivalent vibration level, as per ISO 22867, is calculated as the time-weightedenergy sum for the vibration levels at various operational states. The data presented for equivalent vibration level has a typical variation (standard deviation) of 1 m / s².

( Values obtained by our R&D department.)

51

technical specifications for chainsaws.


52

technology and functions that make light work of heavy cutting.

DEX, our newly developed dust extinguisher system, is standard on all petrol-driven cutters. The system includes a water-saving wet cutting kit that halves the water consumption. This results in a cleaner work environment with minimum water usage and slurry. DEX also includes the mobile battery-powered water tank WT 15, so you don’t have to pump manually.


All petrol-driven models are equipped with a Poly-V belt for better transmission of power, longer product life and extended service intervals.

The K 760 and K 970 models feature our unique X-Torq engine technology which provides more power, up to 75 % lower emissions and 20 % less fuel consumption.

53

The new Active Air Filtration™ is one of the most efficient air cleaning systems on the market. It delivers service intervals of up to one year, with no need for filter service.

DEX includes a mobile battery-powered water tank WT 15, so you don’t have to pump manually.

Dura Starter™ is a patented, dust-sealed starter unit, where the return spring and the pulley bearing are sealed. This makes the starter virtually maintenance free, giving a further boost to the reliability of our power cutters.

High performance – low fuel consumption.

Low vibrations for comfortable work.

Robust, long-life constructions.

TECHNICAL SPECIFICATIONS K 1260

Engine Air–cooled 2 stroke engine

Displacement, cm³ 119

Power, kW* 5.8





Power, kW * 4.8


54

Husqvarna k 1260. Husqvarna k 970.One of the most powerful power cutters on the market. Despite its large, powerful engine, it is an impressively light and versatile machine. The Husqvarna K 1260 has a wide range of applications. It can handle effective cutting with blades up to 400 mm and cutting depths up to 145 mm.

■■ The new Active Air Filtration™ is one of the most efficient air cleaning systems on the market. For dry cutting, it delivers service intervals of up to one year, with no need for filter service.

■■ Built-in automatic filter compensation (SmartCarb™) contributes to continually high power levels and low fuel consumption.

■■ The Poly-V belt provides better transmission of power, less frequent re-tensioning and greatly extended product life.

■■ Easily adjusted blade guard makes the work easier.■■ Effective vibration dampening makes the machine comfortable to hold even during long work shifts.

■■ DEX, the newly developed dust extinguisher system, gives cleaner cutting with less water usage and slurry.

A reliable and ergonomic power cutter that has an unique power-to-weight ratio. With many unique qualities that put it in a class of its own when it comes to efficiency, manoeuvrability and emission levels.


■■ The unique X-Torq engine technology gives high torque as well as up to 75% lower exhaust emissions and 20 % less fuel consumption.


■■ Air Purge and decompression valve make the machine even easier to start.

■■ Dust sealed starter (DuraStarter™) reduces the risk of downtime and gives increased reliability and service life.


■■ Effective vibration dampening makes the machine comfortable to hold even during long work shifts.





Power, kW * 3.7


SPECIFICATIONS K 3000 Wet

Engine, V Electric 230 / 120 / 110

Power, W * 2700 / 1800 / 2200


55

Husqvarna k 760. Husqvarna k 3000 Wet.A powerful and versatile electric cutter that is easy to handle thanks to many smart functions and its low weight. Perfect for both outdoor and indoor work.

■■ Generous distance between the handles improves control and reduces load.

■■ Elgard™, the advanced electronic overload protection system, varies the rpm rate, to warn the user of an approaching overload.

■■ Electronic SoftStart™ allows starting with normal, slow-acting fuses.

■■ Quick-locking of the spindle and large blade guard opening facilitate blade changes.

■■ Generously dimensioned mitre gear provides high durability, minimal power loss and low noise levels.


■■ A residual current device makes operation safer.

A model that belongs to our new generation of power cutters that feature advanced, exclusive technology. As a user you enjoy both high performance and impressive fuel economy. Thanks to efficient vibration dampening the Husqvarna K 760 is an extremely comfortable power cutter to use.


■■ The unique X-Torq engine technology gives high torque as well as up to 75 % lower exhaust emissions and 20 % less fuel consumption.


■■ Air Purge and decompression valve make the machine even easier to start.

■■ Dust sealed starter (DuraStarter™) reduces the risk of downtime and gives increased reliability and service life.


■■ Effective vibration dampening makes the machine comfortable to hold even during long work shifts.


MATERIAL MT SERIES AS SERIES

MT 85 MT 65 MT 15 + AS 12 AS 35 + AS 45 + AS 65 + AS 85 +

HARD TILES, PORCELLANATO – – – l l – – –CERAMIC TILES – – – l l – – –GRANITE – – – l l – – –MARBLE – – – l l – – –CURED CONCRETE – l l l l l l –REINFORCED CONCRETE – l l l l l l –BRICK l l l l l l l –ROOF TILE l l – l l l l –ABRASIvE MATERIAL l – – – – – l l

ASPHALT l – – – – – l l

IRON – – – – – – l –DUCTILE IRON – – l l – – – –

l = Optimal l = Good l = Acceptable – = Not recommended

56

Husqvarna Mt 85 / Mt 65 / Mt 15 +.

Husqvarna AS 12 / AS 35 + / AS 45 + / AS 65 + / AS 85 +.

Blades for power cutters.

The right choice for precise cutting in hard material.

■■ Provide cost effective cutting performance.■■ Ideal for occasional use.■■ Specially developed for electric, air and petrol powered hand held cutters.

Unique diamond blades for a wide range of applications.

■■ Premium blades for professional users who want value for money as well as good performance.

■■ Kite profile to reduce surface contact of a new blade, for easier start.

■■ Kite segment shape indicates the direction of rotation.■■ “Easy-fit”, a bushel for bore hole expansion from 20 to 25.4 mm up to 400 mm blades.

■■ Specific segments added on AS 85 + asphalt blade for protection against undercutting.

■■ Turbo jointed segments on AS 12 for applications requiring high-quality finishing of cut.

57

Accessories for handheld power cutters.

CUttING tROLLEYSSpecifically designed for our handheld petrol power cutters. The trolleys make it easy to cut in straight or curved lines, and close to walls and curbstones. They are compact and can be folded, facilitating transportation.

tWO-StROkE OIL WItH HANDY DISPENSING BOttLEComplies with the highest JASO / ISO-Global EGD standards. Doses of 2 cl, is needed for mixing with one litre of petrol. Gives the correct oil mixture faster and more easily.

AIR fILtER OILBiodegradable. Provides efficient collection and binding of particles in the filter, for a cleaner engine and less wear. Does not contain solvents or dessicants.

OILGUARD OILHigh-quality two-stroke oil developed specially for dusty environments. Can be used in any premium two-stroke engine.

PRESSURISED WAtER tANkHolds 15 litres and comes complete with a 3 metre hose which is connected to the wet cutting kit on the machine.

WAtER HOSE9 metres long with quick connections and the possibility to join multiple sections together.

fUEL CAN WItH NON-SPILL fILLERMakes refuelling convenient. Made of tough plastic with a capacity of 6 litres. Approved according to UN regulations.

tRANSPORt BOXESPerfect for both protecting and keeping track of different kind of equipment when moving between worksites. Made of plywood, with metal reinforcement at edges and corners.

MOtOR kItComprises a complete crankcase with assembled crankshaft, piston and cylinder. Useful in the event of urgent repairs.

HUSqVARNA Wt 15Compact and easy-to-use water tank with electric pump. Has a capacity of 15 litres and allows continual cutting for 45 minutes. Battery-powered, 18.5 V Gardena Li-Ion accumulator system.

58

K 1260 K 970 K 760 K 3000 Wet

Electric motor, V ― ― ― 230 / 120 / 110

Rated output, W ― ― ― 2700 / 1800 / 2200

Power, W ― ― ― 2700

Rated current, A ― ― ― 12 / 15 / 20

Air-cooled 2-cycle engine ―

Displacement, cm³ 119 94 74 ―

Power, kW 5.8 4.8 3.7 2.7

Power / weight ratio 0.42 / 0.40 0.45 / 0.44 / 0.41 0.38 / 0.37 ―

Weight, without fuel and cutting equipment, kg 13.7 / 14.4 10.6 / 11.0 / 11.8 9.7 / 9.9 ―

Weight incl. cable without cutting equipment, kg ― ― ― 7.8

Blade, mm 350 / 400 300 / 350 / 400 300 / 350 350

Cutting depth, mm 125 / 145 100 / 125 / 145 100 / 125 125

Elgard™, overload protection ― ― ―

“Pulling” rotation

Simple blade change

Active Air Filtration™ ―

X-Torq ― ―

SmartCarb™ ―

Air Purge ― ―

Dura Starter™ ― ―

EasyStart decompression valve ―

Poly-V belt ―

Sealed transmission ―

Reversible cutting arm ―

Fuel indicator in the tank ― ―

Easy-adjust blade guard

Wet cutting kit

DEX

Replaceable arbor bushing

Sound power level Lwa, dB(A) 117 114 101 105

Sound pressure level, dB(A) 103 104 97 95

Vibrations front handle equivalent, m / s² 3.3 / 3.6 3.1 / 3.7 / 2.5 1.9 / 2.0 3.5

Vibrations rear handle equivalent, m / s² 3.5 / 4.1 5.4 / 4.5 / 3.5 2.6 / 2.6 3.5


MT 85 MT 65 MT 15 + AS 12 AS 35 + AS 45 + AS 65 + AS 85 +

Diameter, mm 300, 350 300 , 350 300, 350 300, 350 300, 350, 400 300, 350, 400 300, 350, 400 300, 350, 400

Blade geometry Segmented Joint segments Segmented Joint segments Segmented Segmented Segmented Segmented

Segment shape Flat Flat Turbo Turbo Kite 2 Kite 1 Kite 2 Kite 1

Segment height, mm 7 12 10 7.5 10 + 2.5 10 + 2.5 10 + 2.5 10 / 14.5 + 2.5

Number of segments ― ― ― 23–27 19, 23, 26 20, 24, 27 19, 23, 26 18, 21, 24

Bore, mm 20 – 25.4 20 – 25.4 20 – 25.4 25.4 / 20 “Easy-fit”

25.4 / 20 “Easy-fit”

25.4 / 20 “Easy-fit”

25.4 / 20 “Easy-fit”

25.4 / 20 “Easy-fit”

59

technical specifications for power cutters.


technical specifications for Mt and AS.

60

61

Our zero-turn mowers have a single dominant feature: industry-leading productivity. These are high-performance machines for large-scale mowing. For quick, precise results, time after time. They are also extremely durable, with first-rate ergonomics and excellent access for maintenance and service. The range consists of machines to suit a all professional customer requirements and preferences, and includes the commercial PZ series and the entry level MZ series.

Zero-turn mowers.General features 62

Husqvarna PZ 29D 64

Husqvarna PZ 29 65

Husqvarna MZ 28T 66

Attachments 67


62

All models have high-spec engines from recognised engine suppliers. The engines combine high performance with low fuel consumption, and meet all emission and noise requirements.

The operator is at the centre of events, with an overview of the working area and all controls within comfortable reach.

An overall commercial construction with heavy-duty steel tube frame and extensive use of cast steel components ensure maximum durability.

Outstanding ergonomics such as efficient vibration isolation of the seat, footrest and steering levers for longer, more comfortable work shifts.

Engine, hydraulic and electrical systems are easily accessible to minimize downtime during regular maintenance and service.


Need a machine with a large capacity?Choose a compact, productive zero-turn mower.

63

The zero-turn mowers can be fitted with a highly efficient side- discharge cutting deck, or our unique Combi deck with both mulching and rear discharge. The side discharge cutting deck can be fitted with a collection system or mulching kit.

With our newly developed cutting technology you always get well-cut and evenly distributed grass clippings – even at high speeds.

High productivity thanks to fast cutting speeds and high- capacity cutting decks.

Ergonomic operator interface for convenient control over the work area.

Heavy- duty construction for maximum durability.

Easy-access service points for minimum downtime.

The zero-turn mowers leave no uncut circles and have unmatched manoeuvrability. Thanks to independent wheel drive and lever controls they can turn on the spot and quickly change direction. The front casters provide stability and facilitate driving.

64

Husqvarna PZ 29D.Built on a totally new concept. A powerful, fast and productive diesel machine in the largest sector of zero-turn mowers. Highly robust yet comfortable to use. It mows carefully, distributing the grass clippings neatly – even at high speeds. The PZ 29D can be fitted with a cutting deck with side discharge or a Combi deck allowing switches between mulching and rear discharge.

■■ Powerful liquid-cooled Kubota diesel engine.■■ Superior airflow for faster cutting speeds and increased productivity.

■■ Deck options include PZ class, fabricated side discharge or the exclusive Combi deck for both mulching and rear discharge.

■■ Frame construction is 5 5 7.5 cm steel tube for high structural strength.

■■ Rugged front caster yokes feature tapered roller bearings on wheels and pivots.

■■ Cutting decks feature double supported anti-scalp rollers.■■ Convenient operator interface with easy-access controls and ergonomically angled steering levers.

Ergonomic, convenient operator interface with easy-access control panel. Left tank features built in holders for cup and mobile phone.

The liquid-cooled Kubota diesel engine provides excellent power even in the toughest conditions.

Rubber isolators separate hands, body and feet from the frame for less fatigue during operation.

■■ Full suspension seat and deep cushioning combined with vibration-dampened platform for comfortable operation.

■■ Simple, pedal-operated deck lift for reduced effort and hands free operation.

■■ Easy access for servicing oil, filters, battery, electrical components and hydraulics for minimum downtime.

■■ An efficient 450 liter blower-assisted collection system is available as an accessory.

■■ Double fuel tanks (total 45 litres).

TECHNICAL SPECIFICATIONS PZ 29D

Engine Kubota

Net power at preset rpm, kW * 18.6 kW @ 2200 rpm

Transmission Pump / Wheel motor

Cutting deck Side discharge or Combi

Cutting width, cm / inch 153 – 155 / 60 – 61


65

Husqvarna PZ 29.The petrol model in our new PZ series, featuring a perfect combination of power, performance and durability. A highly productive machine that handles large areas and leaves perfectly cut and evenly distributed grass clippings – even at high speeds. The PZ 29 can be fitted with either a cutting deck for side discharge or a Combi deck offering both mulching and rear discharge.

■■ High performance from the 2-cylinder Kawasaki FX engine.

■■ Superior airflow for faster cutting speeds and increased productivity.

■■ Deck options include PZ class, fabricated side discharge or exclusive Husqvarna Combi deck.

■■ Frame construction is 5 5 7.5 cm steel tube for high structural strength.

■■ Rugged front caster yokes feature tapered roller bearings on wheels and pivots.

■■ Cutting decks feature double supported anti-scalp rollers.■■ Convenient operator interface with easy-access controls and ergonomically angled steering levers.

■■ Full suspension seat and deep cushioning combined with vibration-dampened platform for comfortable operation.

■■ Simple, pedal-operated deck lift for reduced effort and hands free operation.

■■ Easy access to service of oil, filters, battery, electrical components and hydro system for minimum downtime.

■■ An efficient 450 litre blower-assisted collection system is available as an accessory.

■■ Double fuel tanks (total 42 litres).

TECHNICAL SPECIFICATIONS PZ 29

Engine Kawasaki


Transmission Pump / Wheel motor

Cutting deck Side discharge or Combi



The Combi deck makes it possible to switch quickly between mulching and rear discharge. The robust deck is stamped from a single sheet of 4.5 mm steel.

The PZ series has a low centre of gravity and a wide stance, which gives exceptional stability and ensures a comfortable ride.

The robust, pedal-operated deck lift system allows quick, hands free operation.

66

Husqvarna MZ 28t.Designed for large landowners or small-scale landscape contractors, the MZ series combines performance with high value. Robust side discharge deck for efficient mowing of large grass areas.

■■ Powerful 2-cylinder Briggs & Stratton Endurance engine with EFM (Electronic Fuel Management).

■■ High performance and durable MZ class 132 cm side discharge deck.

■■ One-piece frame for increased rigidity.■■ Large front casters for increased durability and comfort.■■ Commercial-grade ZT-3400 transmissions offer high speed and efficient operations.

■■ Wide rear tyres for a smooth ride and less turf compaction.

■■ Dual levers with foam-padded handgrips and viscous dampers reduce vibration.

■■ Efficient 317 litres collection system is available as attachments.

TECHNICAL SPECIFICATIONS MZ 28T

Engine Briggs & Stratton Endurance


Transmission Hydrostatic

Cutting deck Side discharge

Cutting width, cm / inch 132 – 52


The MZ deck features twin 3 mm steel sheet construction and cast aluminium spindles.

Blower-assisted three bin collection system with durable nylon bags available as attachment.

Small dimensions and compact design contribute to more efficient transport and storage.

67

Attachments for zero-turn mowers.

fABRICAtED CUttING DECkSFabricated cutting decks with side discharge. Made of 3 – 4.5 mm thick steel for excellent strength. High performance and superior airflow, giving excellent cutting results and clipping dispersal. Fits PZ series. Cutting width: 137 – 153 cm.

COMBI DECkUnique cutting deck that offers the option of two cutting methods. The deck has been engineered for effective mulching. Where necessary you can easily remove a plug and switch to rear discharge. The Combi deck is stamped from one single sheet of 4.5 mm steel. Fits PZ series. Cutting width: 155 cm.

BLOWER-ASSIStED COLLECtION SYStEMEfficient three bin collection systems that can be fitted to the side discharge fabricated cutting decks. Very quick attachment and horizontal pump style blower increase performance. Collector volume: 450 litres for PZ and 317 litres for MZ.

ROPS (ROLL OVER PROtECtION StRUCtURE)Roll bar to reduce the risk of personal injury should the mower start to roll. The bar can be adjusted vertically. Mounted directly onto the chassis. Safety belt included.

EXtRA SEt Of LIGHtSFitted on the roll bar to give powerful and effective work lighting.

Examples of more attachments:

MULCH kItSMulch kits for conversion to mulching on side discharge decks.

OCDCThe Operator Controlled Discharge Chute restricts the discharge on side decks to allow trimming around flowerbeds and along roadsides.

68

PZ 29D PZ 29 MZ 28T

Engine manufacturer Kubota Kawasaki Briggs & Stratton

Engine name 05 Series FX Series Endurance Series V-Twin

Net power at preset rpm, kW 18.6 kW @ 2200 rpm 18.9 kW @ 2550 rpm 15.7 kW @ 2950 rpm

Cylinder displacement, cm³ 1261 852 810

Cylinders 3 2 2

Engine cooling Liquid Air Air

Battery, V 12 12 12

Air filter type Heavy-duty canister style Heavy-duty canister style Standard

Fuel type Diesel Gasoline Gasoline

Fuel tank volume, litres 45.4 41.6 19

Engine lubrication type Full pressure Full pressure Full pressure

Transmission type Pump / Wheel motor Pump / Wheel motor Hydrostatic

Transmission manufacturer Hydro-Gear / Parker Hydro-Gear / Parker Hydro-Gear (ZT3400)

Pump displacement, cm³ 21 12 12

Wheel motor displacement, cm³ 328 295 ―

Fan-cooled pumps

Hydraulic reservoir, litres 5.7 5.7 ―

Speed forward, min – max, km / h 0 – 21.7 0 – 17.7 0 – 16.1

Speed reverse, min – max, km / h 0 – 9.7 0 – 9.7 0 – 8

Cutting width, cm 153 – 155 137 – 155 132

Cutting deck type Fabricated / Stamped Fabricated / Stamped Fabricated

Cutting methods Side discharge / Combi Side discharge / Combi Side discharge

Deck thickness, mm / gauge 4.5 / 7 4.5 / 7 3 / 11

Cutting height, min – max, mm 25 – 127 25 – 127 38 – 114

Cutting height steps 17 17 12

Blade engagement Electric clutch Electric clutch Electric clutch

Clutch rating, Nm 339 339 271

Blades 3 3 3

Anti-scalp wheels 4 4 2

Deck lifting system Manual, foot activated Manual, foot activated Manual, foot activated

Tyre size, front, inch 13 × 6.5 – 6 13 × 6.5 – 6 13 × 5 – 6

Tyre size, rear, inch 23 × 10.5 –12 23 × 10.5 –12 23 × 10.5 –10

Base machine, length, cm 210 210 192

Base machine, width, cm * 147 132 170

Base machine, height (ROPS down), cm 121 121 107

Weight, kg ~ 600 (depending on deck) ~ 600 (depending on deck) 261

ROPS ―

Flat-free front tyres ―

Seat material Vinyl Vinyl Vinyl

Seat suspension

Armrests

Hour meter

Cup holder

= Available ― = Not available * Without cuttingdeck.

69

technical specifications for zero-turn mowers.


70

71

Our PT, PF and PR models are designed and manufactured in Sweden, and optimised for commercial lawn care in Europe. At first sight they may appear like ordinary rotary front mowers. But take a closer look, and more importantly put them to the test, and you will soon discover the difference. A range of unique solutions means that our machines have a level of manoeuvrability, ergonomics and cutting performance that is a class above all other rotary front mowers on the market.

Rotary front mowers.General features 72

Husqvarna PT 26D 74

Attachments PT 26D 75

Husqvarna PF 21 AWD / PF 21 76

Husqvarna PR 17 AWD / PR 17 77

Attachments PF 21 / PR 17 78


72

The unique articulated steering contributes to the smallest turning radius in the machine class, with an uncut circle of only 80 cm (applies to Husqvarna PT 26D).

There is a range of attachments available for our rotary front mowers which transforms them into all-year-round machines.

The operator has a perfect overview of the working area and all controls are within comfortable reach, which is largely due to the side control panel.

Our advanced rotary front mowers make it easy to increase productivity.


Unbeatable manoeuvrability with front-mounted cutting deck and

unique articulated steering.

High productivity thanks to optimized trimming ability.

Durable components for minimum downtime.

Optimal, ergonomic operator interface.

Mowers developed for European conditions.

73

The high-performance Combi deck is stamped from a single piece of steel plate. It’s a unique solution that delivers efficient mulching and rear discharge cutting with exceptional results as well as problem-free operation. The low profile of the front-mounted cutting deck enables mowing close to fences and walls, and under bushes and park benches, which means minimal trimming afterwards.

74

Husqvarna Pt 26D.A high-capacity, modern rotary front mower with market leading performance. The unique articulated steering provides the PT 26D with manoeuvrability that is the best in this machine class. In addition you enjoy top class driver ergonomics with a perfect overview of the working area and all controls within comfortable reach. The PT 26D has been developed and manufactured in Sweden to suit European needs. It can be fitted with plough, broom and utility bucket for use all-year-round. The cutting deck is available in widths 132 and 155 cm and features our innovative Combi function that makes it possible to switch quickly between mulching and rear discharge.

■■ High performance from the 3-cylinder Perkins diesel engine.

■■ The unique articulated steering produces a minimal turning radius with an uncut circle of 80 cm.

■■ Spacious operator platform with superior comfort for long working hours.

■■ The chassis is welded in 40 5 40 5 4 mm steel tubular

ladder-frame. A durable yet light construction.■■ Shaft PTO for maximum efficiency and versatility.■■ Two speeds, which can easily be changed while in motion, using an electric switch.

■■ The Combi deck makes it easy to switch between mulching and rear discharge.

■■ No tools are required for the three-point cutting height adjustment.

■■ The cutting deck can be tilted up without using tools, which facilitates cleaning and maintenance.

■■ All-wheel drive gives the best conceivable grip on all surfaces.

■■ A wide range of attachments makes the PT 26D a versatile year-round machine.

TECHNICAL SPECIFICATIONS PT 26D

Engine Perkins


Transmission Hydrostatic AWD

Cutting deck Combi



Ergonomic and comfortable operator interface with all controls close at hand.

The cutting deck is tilted up into service position quickly and easily.

The cutting deck is stamped from one single sheet of 4.5 mm in (7-gauge) steel.

The PT 26D is delivered with ROPS as standard (not shown in picture).

75

Attachments for Husqvarna Pt 26D.

GRAMMER PRIMO L*

Deluxe seat with high back and level dampers helps provide the best possible comfort for long work shifts.

UtILItY BUCkEtTransport ladle with hydraulic control for gravel, earth and snow. Working width: 115 cm.

fOLDING PLOUGHRobust plough with hydraulic side setting that can assume the form of a forest plough, with a Y shaped or diagonal blade. Working width: 120 –140 cm.

BROOMRotating broom with hydraulic side setting for sweeping leaves, gravel and thin coverings of snow. Can be angled 25° to the left and right. Working width: 125 –135 cm.

ROAD kItFor safe transport on public roads to and from the work sites. Consists of a sign for slow moving vehicle, rotating warning light, horn as well as a position light and indicators front and rear.

fLAIL MOWERHigh-capacity flail mower for tall grass and extensively maintained areas. Mechanical cardan operation. Working width: 120 cm. Weight: 128 kg.

Examples of more accessories:■■ Hydraulic set with a double action hydraulic outlet for control of accessories. Controlled by existing joystick. ■■ Catalytic converter assembly that reduces hydrocarbons and carbon dioxide by up to 50% and 25% respectively.

* Manufactured by Müthing GmbH and Grammer AG. Distributed via certified partners. Contact your local distributor for more information.

76

Husqvarna Pf 21 AWD / Pf 21.

The cutting deck has a low design, which gives good accessibility for mowing under park benches and other obstacles.

The hydraulic lifting system means effective control of the front-mounted equipment.

The unique articulated steering contributes to excellent manoeuvrability and a minimal turning radius.

Advanced rotary front mowers that are adapted to handle confined and complex surfaces, which is principally due to our unique articulated steering which contributes to superb manoeuvrability. If you choose the AWD version you get excellent grip on all surfaces and on slopes. Both models have servo control, hydraulic lifting system for the cutting deck and attachments such as broom and snow blower, which makes them versatile all-year-round machines.

■■ Powerful 2-cylinder engine from Kawasaki. ■■ The unique articulated steering produces a minimal turning radius with an uncut circle of 60 cm.

■■ The cutting deck is stamped from one single sheet of 4 mm steel and has a low design with superb accessibility.

■■ Ergonomic operator platform with all controls in a central position and within comfortable reach.

■■ Hydraulic lifting system ensures it is easy to raise and lower the cutting deck, which makes working more effective.

■■ Servo-assisted control simplifies manoeuvring on complex surfaces and enhances the driving feeling.


■■ The cutting deck can be tilted up without using tools, which facilitates cleaning and maintenance.

■■ All-wheel drive gives the best conceivable grip on all surfaces and on slopes. (PF 21 AWD only.)

■■ Several attachments make these models versatile all-year-round machines.

TECHNICAL SPECIFICATIONS PF 21 AWD PF 21

Engine Kawasaki Kawasaki


12.9 kW @ 3000 rpm

Transmission Hydrostatic AWD Hydrostatic

Cutting deck Combi Combi

Cutting width, cm / inch 112 – 122 / 44 – 48 112 – 122 / 44 – 48


77

Husqvarna PR 17 AWD / PR 17.The smallest rotary front mower in the range – with impressive cutting results and manoeuvrability. The small dimensions of the machine along with its compact design make it a great alternative to push mowers in smaller, confined areas.

■■ Powerful 2-cylinder engine from Kawasaki.■■ The unique articulated steering produces a minimal turning radius with an uncut circle of 50 cm.

■■ The cutting deck is stamped from one single sheet of 4 mm steel and has a low design with superb accessibility.

■■ Ergonomic operator platform with all controls in a central position and within comfortable reach.

■■ Hydraulic lifting system ensures it is easy to raise and lower the cutting deck, which makes working more effective.

■■ Servo-assisted control simplifies manoeuvring on complex surfaces and enhances the driving feeling.


■■ The cutting deck can be tilted up without tools, for easy cleaning and maintenance.

■■ All-wheel drive gives optimum grip on all surfaces and on slopes (applies to PR 17 AWD).

■■ Several attachments make these models versatile all-year-round machines.

TECHNICAL SPECIFICATIONS PR 17 AWD PR 17


Net power at preset rpm, kW* 10.9 kW @ 2900 rpm

10.9 kW @ 2900 rpm

Transmission Hydrostatic AWD Hydrostatic

Cutting deck Combi Combi

Cutting width, cm / inch 94 – 112 / 37 – 44 94 – 112 / 37 – 44


All-wheel drive (AWD) gives good grip on all surfaces and on slopes.

The unique articulated steering contributes to excellent manoeuvrability and a minimal turning radius.

Small dimensions and compact design mean that the PR 17 models are is able to access small, confined areas, thereby making it an excellent alternative to a push mower.

78

Attachments for Husqvarna Pf 21 / PR 17.

POWERfUL fLAIL MOWERWith mitre gear for clearing uncultivated grass and low-lying brushwood. Free hanging flail blades fitted as standard. Roller with dethatching flail blades available as accessory. Working width: 100 cm.

ROtAtING BROOMFor sweeping leaves, gravel and thin coverings of snow. Can be angled 20° to the left and right. Working width: 120 cm.

ROBUSt fOLDING PLOUGHWith hydraulic operation. Can assume the form of a forest plough, with a Y shaped or diagonal blade. Working width: 120 cm.

POWERfUL SNOW PLOUGHThe steel plough can be set at five different angles, to the right and the left. Rubber edges available as accessories. Working width: 120 cm.

EffECtIVE SINGLE-StEP BLOWERWith mitre gear for snow clearance. The discharge duct rotation is 210°. Working width: 100 cm.

PROfI tRAILERRobust trailer with lockable, folding flaps, tilt function and extra wide wheels. Loading dimensions: 90×123×30 cm.

PROfI SPREADERLarge spreader for sand, salt and fertiliser. Electric control of the spreading roller ensures even distribution. The protective screen also serves as a riddle for gravel in sizes up to 10 mm. Working width: 100 cm.

HUSqVARNA tA 36Extremely robust, tow-behind aerator with roller with hollow tines. Working width: 92 cm. Capacity up to 10 000 m² / hour. Weight tanks available as accessories.

GRAMMER PRIMO M*

Deluxe-seat with many options for personal settings for the best ergonomic and comfortable driver environment possible. (The seat in the illustration is fitted with extras.)

*Manufactured by Müthing GmbH and Grammer AG. Distributed via certified partners. Contact your local distributor for more information.

PT 26D PF 21 AWD PF 21 PR 17 AWD PR 17

Engine manufacturer Perkins Kawasaki Kawasaki Kawasaki Kawasaki

Engine name 403D-11 FH641V FH641V FH541V KAI FH541V KAI

Engine type Diesel V-Twin OHV V-Twin OHV V-Twin OHV V-Twin OHV

Net power at preset rpm, kW 19.7 kW @ 3000 rpm 12.9 kW @ 3000 rpm 12.9 kW @ 3000 rpm 10.9 kW @ 2900 rpm 10.9 kW @ 2900 rpm

Cylinders 3 2 2 2 2

Cylinder displacement, cm³ 1131 675 675 585 585

Engine lubrication type Full pressure Full pressure Full pressure Full pressure Full pressure

Oil filter

Air Filter type Donaldson FPG4 Heavy-Duty Canister Style

Heavy-Duty Canister Style



Generator, A 40 13 13 13 13

Engine cooling Liquid Air Air Air Air

Battery, V / Ah 12 / 40 12 / 24 12 / 24 12 / 24 12 / 24

Fuel type, min, cetane / octane 45 87 87 87 87

Transmission manufacturer Sauer Danfoss Kanzaki Tuff Torq Kanzaki Tuff Torq

Transmission type Hydrostatic AWD Hydrostatic AWD Hydrostatic Hydrostatic AWD Hydrostatic

Transmission model MPV 025 / OMEW K664 K66 K664 K66

Blade engagement Electric Automatic Automatic Automatic Automatic

Uncut circle, cm / inch 80 / 31.5 60 / 23.62 60 / 23.62 50 / 19.7 50 / 19.7

Speed forward, min – max, km / h 0 – 18 0 – 11 0 – 11 0 – 11 0 – 11

Speed reverse, min – max, km / h 0 – 13 0 – 7 0 – 8 0 – 7 0 – 8

Seat type Professional, suspension Premium Premium Premium Premium

Hinged armrests ― ―

Ball beared wheels

Wheelbase, cm 116 100 100 87 87

Ground clearance, mm / inch 175 / 6.89 90 / 3.54 110 / 4.4 75 / 2.95 90 / 3.6

Tyre dimensions, front 20 × 10.0 – 10 195 / 65 – 8 195 / 65 – 8 165 / 60 – 8 165 / 60 – 8

Tyre dimensions, rear 20 × 10.0 –10 195 / 65 – 8 195 / 65 – 8 165 / 60 – 8 165 / 60 – 8

Articulated steering

Power steering

All-Wheel Drive (AWD) ― ―

Oil cooler ― ― ―

Hydraulic equipment lift

Maintenance position

Headlights

Quick connection ―

Hour meter Digital Digital Digital Digital Digital

Transparent tank

12 V outlet

Cup holder

Cargo holder

Pivoting rear axle

Catalytic converter ( )

Adapted cutting decks Combi 155, Combi 132 Combi 112, Combi 122 Combi 112, Combi 122 Combi 94, Combi 103, Combi 112

Combi 94, Combi 103, Combi 112

Adapted front attachments Utility bucket, Snow blade, Snow blower, Rotating

broom, Flail mower, Folding plough

Snow blade, Snow blower, Rotating








Cutting deck type Combi Combi Combi Combi Combi

Cutting methods Mulching / Rear discharge

Mulching / Rear discharge




Deck construction, mm 4.5 4 4 4 4

Cutting height, min – max, mm 24.5 – 127 25 – 75 25 – 75 25 – 75 25 – 75

Cutting height steps, pcs 7 7 7 7 7

Cutting width, min – max, cm 132 – 155 / 52 – 61 112 – 122 / 44 – 48 112 – 122 / 44 – 48 94 – 112 / 37– 44 94 – 112 / 37– 44

Blades 3 3 3 3 3

Noise level, dB(A) / rpm <104 / 3000 <102 / 3000 <102 / 3000 <100 / 3000 <100 / 3000

Width base machine, cm 115 90 90 90 90

Height, cm 131 116 116 113 113

Length base machine, cm 207 205 205 203 203

Weight base machine, kg 631 330 311 300 290

= Available ― = Not available ( ) = Accessories

79

technical specifications for front mowers.


80

81

There are many years of research behind our lawnmowers. This has resulted in a range of models to suit different needs and preferences. Our range consists of both driven and walk behind models. Many offer effective mulching as well as mowing with rear discharge. All are effective, easy to operate and ergonomically sound machines that give you first-class mowing results time after time.

Lawnmowers.General features 82

Husqvarna W 53CSB / W 53CS 84

Husqvarna M 53S Pro / M 48 Pro 85

Husqvarna WB 53S e / WB 48S e 86

Husqvarna WC 48S e 87


General features – Automower ® 90

Husqvarna Automower ® 260 ACX 92

Technical specifications – Automower ® 93

82

Our machines require little effort to achieve maximum cutting results.

Certain models have handles that can be adjusted laterally for ergonomic and comfortable working in all situations.

High performing commercial engines and special components with a long service life.


The drive models all have front-wheel drive which gives superb manoeuvrability and the option of quickly changing direction.

83

The stainless steel cutting decks are cast in one piece 5 mm aluminium for optimum torsional rigidity and service life.

Effective vibration damping.

Ergonomics in every detail.

High-performance cutting decks.

Drive or manual operation.

84

Husqvarna W 53CSB / W 53CS.Powerful collector mower with high-spec, reliable Kawasaki engines. Simple but extremely durable components make these machines reliable for day-to-day use over long periods. The spacious 80 litre collectors are easy to empty and remove for rear discharge. You can set the cutting height in seven positions between 20 and 89 mm. Both models have drive and a cutting width of 53 cm.

■■ Very rugged design and choice of material for optimum functionality and reliability over many years.

■■ The cutting decks are cast in one piece aluminium for optimum torsional rigidity and service life.

■■ Effective front-wheel drive makes the mowers easy to manoeuvre.

■■ The spacious collectors can be removed for rear discharge.

■■ Aluminium wheel rims with double ball bearings and rubber tyres offer increased operational reliability.

■■ You can set the cutting height for each wheel which enables optimal mowing in all situations.

TECHNICAL SPECIFICATIONS W 53CSB W 53CS


Cylinder displacement, cm³ 179 179

Net power at preset rpm, kW * 4.5 kW @ 2900 rpm 4.5 kW @ 2900 rpm

Cutting width, cm / inch 53 / 21 53 / 21

Weight, kg 63.5 60


The collector, with a big 80-litre capacity, delivers optimal productivity, and has a well-balanced lift handle for easy removal and installation.

The CSB model has BBC (blade brake clutch), a feature that lets you stop the blades without shutting off the engine. Very handy when crossing gravel pathways or emptying the collector.

Design and components are made to strict commercial standards, for maximum service life and superior reliability.

85

Husqvarna M 53S Pro / M 48 Pro.Lawnmowers specially designed for effective mulching. They are powered by reliable and easy to start Honda engines. Both offer the best conceivable ergonomics, which includes vibration-dampened handles and spring-assisted, central setting of the cutting height. They are compact with folding handles which facilitates transport and storage. Husqvarna M 53S Pro / M 48 Pro with cutting widths 53 and 48 cm respectively.


■■ Effective front-wheel drive makes the mowers easy to manoeuvre (M 53S Pro only).

■■ Specially developed cutting decks with large volume for effective mulching.

■■ Spring-assisted, central adjustment of the cutting height facilitates your work.

■■ Vibration-dampened and folding handles with all controls within comfortable reach.

■■ Aluminium wheel rims with double ball bearings and rubber tyres offer increased operational reliability.

TECHNICAL SPECIFICATIONS M 53S Pro M 48 Pro

Engine Honda Honda




Weight, kg 35.5 30


The controls are easily accessible on the comfort handle, and vibrations are efficiently reduced thanks to vibration dampening.

Aluminium wheels with double ball bearings and rubber tyres deliver increased performance and product life.

Outstanding results, thanks to a well-dimensioned cutting deck. Plus, the deck’s special design reduces the risk of clogging.

86

Husqvarna WB 53S e / WB 48S e.High-performance, ergonomic models with cast aluminium cutting decks. These decks are engineered for effective mulching but can be easily adjusted for mowing with rear discharge. The mowers are fitted with easy-to-start, reliable Honda engines and handles with a sophisticated anti-vibration system. The handles can be adjusted laterally which facilitates your work, for example, on slopes and along house walls and hedges. Both have drive. Cutting widths: 53 and 48 cm respectively.


■■ Choose from two cutting methods: effective mulching, or rear discharge.

■■ Simple and maintenance-free front-wheel drive makes the mowers easy to manoeuvre and effective.

TECHNICAL SPECIFICATIONS WB 53S e WB 48S e

Engine Honda Honda




Weight, kg 34 32.5


The handle can be adjusted laterally for ergonomic and comfortable working in all situations.

Height-adjustable, foldable and vibration-dampened handle with all controls within comfortable reach.

Steel wheel rims with double ball bearings and rubber tyres offer increased operational reliability.

87

Husqvarna WC 48S e.Robust, durabable semi-commercial collector mower for medium-sized areas. Features a high-performance Briggs & Stratton engine. Has a large collector, but can quickly be switched to mulching (BioClip). Front-wheel drive makes this mower highly manoeuvrable. The handle is efficiently vibration-dampened and is side-adjustable, for optimal access along walls and hedges.


■■ Dedicated for efficient collection but can be easily accomodated for mulching method.

■■ Side-adjusted, adjusted, folding, vibration-dampened handles with all controls within comfortable reach.

■■ Steel wheel rims with double ball bearings and rubber tyres offer increased operational reliability.

TECHNICAL SPECIFICATIONS WC 48S e

Engine Briggs & Stratton

Cylinder displacement, cm³ 190


Cutting width, cm / inch 48 / 19

Weight, kg 32.5


Collector with 65-litre capacity, for longer intervals between emptying and increased productivity.

Side-adjusted, adjusted, folding, vibration-dampened handles with all controls within comfortable reach.

Height-adjustable, foldable and vibration-dampened handle with all controls within comfortable reach.

W 53CSB W 53CS M 53S Pro M 48 Pro WB 53S e WB 48S e WC 48S e

Engine manufacturer Kawasaki Kawasaki Honda Honda Honda Honda Briggs & Stratton

Engine type OHV OHV OHC OHC OHC OHC OHV

Engine name FJ180 FJ180 GCV160 GCV160 GCV160 GCV160 850

Cylinder displacement, cm³ 179 179 163 163 163 163 190

Net power at preset rpm, kW 4.5 kW @ 2900 rpm 4.5 kW @ 2900 rpm 2.9 kW @ 3000 rpm 2.9 kW @ 3000 rpm 2.8 kW @ 2900 rpm 2.8 kW @ 2900 rpm 3.1 kW @ 2800 rpm

Engine lubrication type Full pressure Full pressure Full pressure Full pressure Full pressure Full pressure Full pressure

Oil filter ― ― ― ―

Fuel tank volume, litres 2 2 0.93 0.93 0.93 0.93 1.0

Drive system Self-propelled, 3 gears Self-propelled, 3 gears Self-propelled, single speed Push Self-propelled, single speed Self-propelled, single speed Self-propelled, single speed

Drive wheels Rear Rear Front ― Front Front Front

Speed forward, min – max, km / h 3.2 – 6.3 3.2 – 6.3 4 ― 5 5 5

Cutting deck material Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium

Cutting methods Collection / Rear discharge Collection / Rear discharge Mulching Mulching Mulching / Rear discharge Mulching / Rear discharge Collection / Mulching / Rear discharge

Cutting width, cm / inch 53 / 21 53 / 21 53 / 21 48 / 19 53 / 21 48 / 19 48 / 19

Cutting height, min – max, mm 20 – 90 20 – 90 27 – 64 27 – 64 30 – 60 30 – 60 25 – 55

Cutting height steps 7 7 5 5 6 6 6

Cutting height adjustment Individual Individual Central, spring-assisted Central, spring-assisted Central Central Central

Wheel size, front / rear, mm / inch 228.6 / 228.6 228.6 / 228.6 203.2 / 203.2 203.2 / 203.2 203.2 / 203.2 203.2 / 203.2 203.2 / 203.2

Rims, material Aluminium Aluminium Aluminium Aluminium Steel Steel Steel

Ball beared wheels

Collector type Soft bag Soft bag ― ― ― ― Soft bag

Collector volume, litres 80 80 ― ― ― ― 65

Handle type Ergonomic, one-piece Ergonomic, one-piece Anti-vibrated Anti-vibrated Anti-vibrated Anti-vibrated Anti-vibrated

Blade brake clutch (BBC) ― ― ― ― ― ―

Throttle control

Noise level, dB(A) / rpm 98 / 2900 98 / 2900 97 / 3000 95 / 3000 93 / 3000 92 / 3000 92 / 3000

Soft grip ― ―

Handle height adjustment

Foldable handle ― ―

Side adjustable handle ― ― ― ―

Weight, kg 63.5 60 35.5 30 34 32.5 32.5


88

technical specifications for lawnmowers.


W 53CSB W 53CS M 53S Pro M 48 Pro WB 53S e WB 48S e WC 48S e

Engine manufacturer Kawasaki Kawasaki Honda Honda Honda Honda Briggs & Stratton

Engine type OHV OHV OHC OHC OHC OHC OHV

Engine name FJ180 FJ180 GCV160 GCV160 GCV160 GCV160 850

Cylinder displacement, cm³ 179 179 163 163 163 163 190

Net power at preset rpm, kW 4.5 kW @ 2900 rpm 4.5 kW @ 2900 rpm 2.9 kW @ 3000 rpm 2.9 kW @ 3000 rpm 2.8 kW @ 2900 rpm 2.8 kW @ 2900 rpm 3.1 kW @ 2800 rpm

Engine lubrication type Full pressure Full pressure Full pressure Full pressure Full pressure Full pressure Full pressure

Oil filter ― ― ― ―

Fuel tank volume, litres 2 2 0.93 0.93 0.93 0.93 1.0

Drive system Self-propelled, 3 gears Self-propelled, 3 gears Self-propelled, single speed Push Self-propelled, single speed Self-propelled, single speed Self-propelled, single speed

Drive wheels Rear Rear Front ― Front Front Front

Speed forward, min – max, km / h 3.2 – 6.3 3.2 – 6.3 4 ― 5 5 5

Cutting deck material Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium Aluminium

Cutting methods Collection / Rear discharge Collection / Rear discharge Mulching Mulching Mulching / Rear discharge Mulching / Rear discharge Collection / Mulching / Rear discharge

Cutting width, cm / inch 53 / 21 53 / 21 53 / 21 48 / 19 53 / 21 48 / 19 48 / 19

Cutting height, min – max, mm 20 – 90 20 – 90 27 – 64 27 – 64 30 – 60 30 – 60 25 – 55

Cutting height steps 7 7 5 5 6 6 6

Cutting height adjustment Individual Individual Central, spring-assisted Central, spring-assisted Central Central Central

Wheel size, front / rear, mm / inch 228.6 / 228.6 228.6 / 228.6 203.2 / 203.2 203.2 / 203.2 203.2 / 203.2 203.2 / 203.2 203.2 / 203.2

Rims, material Aluminium Aluminium Aluminium Aluminium Steel Steel Steel

Ball beared wheels

Collector type Soft bag Soft bag ― ― ― ― Soft bag

Collector volume, litres 80 80 ― ― ― ― 65

Handle type Ergonomic, one-piece Ergonomic, one-piece Anti-vibrated Anti-vibrated Anti-vibrated Anti-vibrated Anti-vibrated

Blade brake clutch (BBC) ― ― ― ― ― ―

Throttle control

Noise level, dB(A) / rpm 98 / 2900 98 / 2900 97 / 3000 95 / 3000 93 / 3000 92 / 3000 92 / 3000

Soft grip ― ―

Handle height adjustment

Foldable handle ― ―

Side adjustable handle ― ― ― ―

Weight, kg 63.5 60 35.5 30 34 32.5 32.5


89

90

Handles bigger lawns and demanding environments without your supervision.


The drive wheels provide excellent traction even if the surface is slippery. It also handles slopes up to 35 %.

The Automower® robotic mower works extremely quietly and is powered by electricity, resulting in no exhaust emissions.

If an unscheduled event disturbs the operation, the Automower® robotic mower sends a text message to a pre-programmed mobile phone.

Great cutting performance.

Works even in rain.

Quiet and no emissions.

PIN code and alarm.

91

The razor-like blades cut the grass cleanly and since cutting is so frequent, the grass clippings are short, which produces better fertiliser.

The Automower® robotic mower is equipped with PIN code lock and anti-theft larm that prevent it from falling into the wrong hands.

92

Husqvarna Automower® 260 ACX.Robotic mower designed for commercial use. Day or night, rain or shine, it always delivers perfect cutting result similar to traditional mowers. The mower charges and operates itself without need for supervision. Should anything disturb the operation, it sends a text message to your mobile phone. Thanks to large area capacity (5500 m² / 1.4 acre) and low noise level (69 dB), the mower is perfectly suited for use in quiet environments such as hospitals, hotels and leisure facilities, and office locations.

■■ Manages uneven lawns and handles slopes up to 35 %.■■ Built-in sensors help the mower to avoid hard collisions.■■ When more power is needed, it finds its way to the charging station.

■■ The cutting height is easily adjusted by turning a large knob.

■■ If something disturbs the operation, it sends a text message to your mobile phone.

■■ It’s equipped with PIN code lock and anti-theft alarm.

TECHNICAL SPECIFICATIONS 260 ACX

Recommended working area 0 – 5500 m² + / – 20 %

Battery type NiMH

Sound level, dB(A) 60

Cutting height, mm 20 – 60

Weight, kg 13.5


The Automower® robotic mower sends a text message to your mobile phone if an unscheduled event disturbs its operation. In addition, PIN code lock, GPS and a loud anti-theft alarm make the mower less desirable to steel.

The drive wheels provide excellent traction even if the surface is slippery. The robotic mower also handles slopes up to 35 %.

The 260 ACX is built to withstand harsh climates. Being weather independent, it can be outside around the clock and is designed to function properly and unattended without any problems.

260 ACX

Recommended working area 0 – 5500 m² + / – 20 %

Area capacity per hour 230 m² + / – 20 %

Navigation Irregular

Search system Yes, 2 guides

Drive and cutting motor type 2 + 1 Brushless DC motors

Battery type / capacity / voltage NiMH / 6.0 Ah / 18 V

Charging current / principle 7 A / Automatic

Power, W 60

Cutting system 5 pivoting razor blades

Search system Quadsearch

Cutting width / height, cm 32 / 2 – 6

Noice level, dB(A) 69

Weight, kg 13.5

Keypad, buttons 16

Information panel LCD-display with menu

GPS communication

Remote text messaging

Alarm

Pin code lock

Lift sensor

Tilt sensor

Ultrasonic sensor

Boundary wire, m Optional

Staples, pcs Optional

Extra blades, pcs 30

= Available

NOMINAL POWERThe power rating of the robotic lawnmowers indicated is the average net power output when cutting. Mass production mowers may differ from this value. Actual power output for the fi nal machine will depend on the operating speed, environmental conditions and other variables.

93

technical specifications for the Automower® robotic mower.

94

95

We have a range of powerful, efficient machines that help manage your lawn care: aeration, turf cutting, stump grinding and dethatching. Some machines, like Husqvarna DT 22, have special solutions that make them unique on the market. All have high-specifications, reliable engines and robust designs that make them reliable working partners all year round.

Lawn care machines.General features 96

Husqvarna DT 22 98

Husqvarna AR 19 99

Husqvarna TA 36 99

Husqvarna SC 18 100

Husqvarna SG 13 100


96

Special machines that guarantee to simplify even the very toughest work tasks.


The SC 18 sod cutter has smooth adjustment for easy-to-read and quick setting of the working depth.

97

The SC 18 sod cutter is unique with its four-wheel drive that gives reliable access on slopes and up ramps with an incline up to 30 degrees.

The SG 13 stump grinder has the same industry-proven technology used for larger machines. Cutting teeth for various soil types are available.

The DT 22 dethatcher can be fitted with no less than three types of cutting equipment, which makes the product unique in its market.

High-spec engines give reliable and effective operation.

Robust construction for increased durability and maximum uptime.

Engineered for optimum productivity.

Compact design for convenient handling and transport.

98

Husqvarna Dt 22.Powerful and compact dethatcher that has been engineered for demanding work tasks over extended periods. The DT 22 is unique on the market as it can be fitted with three types of cutting equipment, a generously-sized collector or seeder hopper. The machine has a comfort handle that is foldable which facilitates when transporting.

■■ High-spec, powerful and easy-to-start engine from Honda.

■■ With its excellent design, the DT 22 can handle the most demanding tasks.

■■ Easy central setting of working depth which can be adjusted to suit the wear on the blades.

■■ First-class components, which include permanently-lubricated, self-adjusting ball bearings, ensure problem- free operation and long service life.

■■ Seeder optional.■■ Collector optional.

TECHNICAL SPECIFICATIONS DT 22

Engine Honda


Weight, kg 65.3


Blade roller with 20 fixed blades of austempered steel. Cuts off superficial, lateral-growing roots and opens up the surface layer for oxygen, water and nutrients. Used in combination with seed hopper during oversowing.

Blade roller with four rows of free-hanging flail blades of case-hardened steel. Using centrifugal force they beat moss and thatch out of the surface layer of the lawn.

Roller with 42 spring teeth that efficiently but gently gets rid of moss and thatch in the surface layer of sensitive grass areas, especially ones that require a high level of maintenance.

DELtA BLADES fLAIL BLADES SPRING tINES

TECHNICAL SPECIFICATIONS AR 19

Engine Honda


Weight, kg 131


TECHNICAL SPECIFICATIONS TA 36

Engine ―

Net power at preset rpm, kW * ―

Weight, kg 86


99

Husqvarna AR 19. Husqvarna tA 36.Reliable aerator with a capacity of up to 2300 m² / hour. The AR 19 has a top-calibre, fully-welded steel design. The five tine wide deck ventilates effectively even in the most compact areas by punching out cylindrical earth plugs.


■■ Compact design and folding handle makes for good accessibility.

■■ Unique, patented freewheel design ensures optimal manoeuvrability and makes turning easy.


■■ Removable weights create stable and effective operation even on slopes.

■■ Simple rear wheel setting allows for the adjustment of the working depth.

Extremely robust tow-behind aerator with hollow tines, which is availabe as accessory for our ride-on mowers. Working width is 92 cm and the capacity up to 10000 m² / hour.

■■ Unique side wheels allow the aerator to be handily stored on its side or be moved through tight passages.

■■ Two independent tine rotors with interchangeable closed spoon tines provide superior manoeuvrability around corners and tight areas.

■■ Weight tanks available as accessories.

TECHNICAL SPECIFICATIONS SC 18

Engine Honda


Weight, kg 145


TECHNICAL SPECIFICATIONS SG 13

Engine Honda


Weight, kg 114


100

Husqvarna SC 18. Husqvarna SG 13.Powerful and high-capacity stump grinder whose compact design allows it to handle areas as narrow as 70 cm wide. The adjustable handle makes for a comfortable working posture even below ground level.


■■ High-performing stump grinder head makes work effective.

■■ The cutting head has three replaceable teeth. Each tooth has three sides and can be rotated when one side is worn out, which helps extend product life and reduce service costs.

■■ Complete set of teeth is available in three different styles; rocky, sandy and normal conditions.

■■ The compact design requires an access width of just 70 cm.

■■ The handle can be set vertically in four positions.■■ With its excellent design, the SG 13 can handle the most demanding tasks.


■■ Four lifting handles make the machine easy to move.

Extremely effective sod cutter in a class of its own with qualities such as four wheel drive (AWD), compact design and high productivity. The SC 18 has a robust, reliable design with permanently-lubricated ball bearings. The handle has vibration damping and all controls have been positioned within easy reach.


■■ Unique four-wheel drive and low centre of gravity gives optimum stability and safe access on slopes and up ramps when transporting.

■■ Four forward gears and one reverse make it easy to operate and transport.

■■ The effective vibration dampened handle makes for comfortable operation.

■■ Easy handling thanks to the practical location of the controls with automatic blade connection.

■■ Easy to access adjustment knob for quick and easy setting of the working depth.

■■ First-class components, which include permanently-lubricated, self-adjusting ball bearings, ensure problemfree operation and long service life.

DT 22 AR 19 TA 36 SC 18 SG 13

Engine manufacturer Honda Honda ― Honda Honda

Engine name GX160 GX120 ― GX160 GX390

Engine type OHV OHV ― OHV OHV

Net power at preset rpm, kW 3.6 kW @ 3600 rpm 2.6 kW @ 3600 rpm ― 3.2 kW @ 3000 rpm 8.7 kW @ 3600 rpm

Cylinder displacement, cm³ 163 119 ― 163 389

Engine lubrication type Full pressure Full pressure ― Full pressure Full pressure

Oil type SAE 10W-30 SAE 10W-30 ― SAE 10W-30 SAE 10W-30

Oil filter ―

Oil tank volume, incl oil filter, litres 0.6 0.6 ― 0.6 0.6

Engine cooling Air Air ― Air Air

Air filter type Standard Two-stage ― Two-stage Cyclone

Fuel tank volume, litres 3.6 2.5 ― 3.6 6.5

Torque, max., Nm / rpm 10.8 / 2500 7.4 / 2500 ― 10.8 / 2500 26.5 / 2500

Transmission type Push Push Towed Manual Push

Tyre size, front, inch 8 × 1.75 10 × 6 12 × 3 2.75 × 10 – 1 4.1 × 12-6

Tyre size, rear, inch 10 × 1.75 8 × 2 ― 2.75 × 10 – 1 ―

Ball beared wheels

4-Wheel Drive ― ― ― ―

Gear reduction, pcs 1:6 1:6 1:6 1:2 ―

Gears, forward / reverse ― ― ― 4 / 1 ―

Frame Construction Steel Steel Steel Steel ―

Working depth, cm / inch 25.5 / 1 0 – 76 / 0 – 3 0 – 76 / 0 – 3 60.5 / 2.5 300 / 12

Working width, cm / inch 56 / 22 48 / 19 92 / 36 46 / 18 ―

Working depth adjustment Knob Knob Crank Knob ―

Track, cm ― 76 ― ― ―

Aerating pattern, mm ― 97 × 165 112 × 152 ― ―

Number of tines ― 30 32 ― ―

Free-wheel design ― ― ―

Foldable handlebar ― ― ―

Productivity, m² / h ― 2300 10000 ― ―

Insulated handle ― ― ― ―

Standard handle ― ― ― Anti-vibration ―

Electromagnetic clutch ― ― ― ―

Grinding disc diameter, cm / inch ― ― ― ― 35.6 / 14

Brakes ― ― ― ― Discs

Product size, L × W × H, cm 127 × 71 × 102 146 × 76 × 131 135 × 112 × 67 152 × 61 × 91 158 × 69 × 109

Weight, kg 65.3 131 86 145 114


101

technical specifications for lawn care machines.


102

103

Clothing and protective equipment.Clothing 104

Protective equipment 106

Being properly attired when working with landscaping and ground care is all about two things: safety and comfort. All our protective clothing is made of hard-wearing material and satisfies all the relevant legal requirements. Some clothes are also extra reinforced with Cordura and Aramid. Our range is characterised by lightweight, well-sewn garments that have good ventilation and sections of stretch material. In addition, most helmets and parts of the jackets, gloves and trousers are in fluorescent orange, which means that the user is highly visible in all environments. All this is to ensure users enjoy the very best conditions for work that is as efficient and comfortable as possible – all-year-round in all conceivable situations.

104

forest jacket technical.Included in the Technical professional range. Manufactured of a 4-way stretch material with good ventilation. The material is stretchable in all directions, which gives maximum freedom of movement in every situation. Exposed areas are reinforced with extra durable material. Has two outside pockets with waterproofed zippers, and an inner pocket for your mobile phone.

Arbor jacket technical.Included in the Technical professional range. Comfortable jacket especially developed for arborists. Has approved saw protection on top of the arms and upper part of the chest. The upper part of the jacket is made of 100 % ultra polyester. Lower part in 80 % polyester and 20 % cotton. A full-length zipper in front, two front pockets, adjustable waist and extended back.

Waist trouser technical.Included in the Technical professional range and consists of several models with saw protection. Manufactured of 4-way stretch material with good ventilation. Knees reinforced with Aramid. The lower sections of your legs and back are of Cordura. Most models have four or five pockets with zippers and also ventilation pockets on the back of the thighs. All in all, comfortable trousers – especially during long working days.

Work jacket and trousers.Waist-length jacket designed for maximum mobility when clearing and trimming. Made of durable material that breathes. Has pockets on the inside of the shoulders, where thermal plastic protection can be inserted. This is to release pressure from the shoulders when a harness is used during clearing work. The trousers are made of a Taslan-treated Oxford cloth with good ventilation. On the front up to the knees there is extra protection against stones and other objects that might fly up when working.

105

Rain jacket / Back protector with sleeves, Garden Pro.Long jacket that is open at the waist with gusset and press studs for simple spreading over the seat, for example on a rotary front mower. Has a spacious hood that fits when wearing earmuffs. The tail-coat model has adjustable snap closure at the front, extra long sleeves and an extended back with a rain lip.

Safety vest.Fluorescent orange and yellow vest, with 5 cm wide reflective strips.

Class 3: The total fluorescent surface must be at least 0.8 m² and 0.2 m² reflectivity. Class 2: The total fluorescent surface must be at least 0.5 m² and 0.13 m² reflectivity. Class 1: The total fluorescent surface must be at least 0.14 m² and 0.1 m² reflectivity. No gap of more than 5 cm in the fluorescent surface or reflectivity may occur. This means that the zip fastening should be closed for example, on a jacket.

Rain jacket and rain trousers.Jacket and trousers of strong nylon and sections of PU / PVC. Both garments have good ventilation. The jacket has a corduroy collar with Velcro closure, extra long sleeves with press studs and extended back with rain lip. The trousers have an elasticated waist with drawstring and zipper at end of legs, making it easier to put the trouser on over the boots.

Protective trousers in high visibility colours.Fluorescent orange trousers with braces and saw protection 20 m / s, and two reflective strips on each leg.

Clearing trousers.Rain trousers of strong nylon and PU / PVC. With adjustable braces and buttoning at the waist as well as extended back and rain lip.

106

Helmet functional.Adjustable in many ways to fit individual preferences and ensure great comfort. The 6-point cradle gives low pressure against the head and the hearing protectors are ergonomically designed for long working days. Also, light reduction is only 20 % thanks to the new visor UltraVision.

UltraVision visor.Light reduction is only 20 % over the whole mesh area. Less sensitive for water to stick on the mesh. Less sensitive for permanent deformation.

Protective gloves.Gloves produced to meet a range of applications: garden gloves, arborist gloves and five-finger gloves. The last two have saw protection.

Complete tool belt.Has two holsters, lifting hook, lifting tongs, rear tool carrier and 15 m measuring tape. Can be supplemented with different holders and holsters.

Hearing protectors with radio and Bluetooth.Has FM-radio with automatic station search, Bluetooth for connection to your mobile phone (range about 10 m) and microphone that also works in noisy settings. Earmuffs with FM-radio only are also available.

Hearing protectors with visor.Available with plexiglass or mesh visor. Features a cover between the visor and headband keeping out grass or rain from above. Protective glasses or goggles should also be worn to ensure the best possible protection.

107

Loading ramps.Available in straight and curved design. Manufactured in aluminium with anti-slip protection. The ramps are well suited for use on trailers with a height up to 70 cm. Max load: up to 1000 kg.

Limbing saw with bark blade.Saw with curved blade and hook at the tip. For cutting bark without splitting.

Protective shoes, technical.Lightweight shoes made of leather and nylon mesh. Toe cap of hard composite material and front parts reinforced with rubber for extra protection. Waterproofed with a Sympatex membrane between outer fabric and liner.

Protective boots, technical 24.Leather boots with saw protection in class 2 (24 m / s). With steel toe cap, extra padding around ankles, heels and shafts for additional protection as well as comfort. Lower parts are reinforced with rubber. Waterproofed with a Sympatex membrane between outer fabric and liner.

Protective boots functional 28.Handmade boots with saw protection, extra-reinforced upper with steel toecap and reinforcing around the stud-ready sole. Canvas lined, deep rear lacing, gripping points on the leg and a new easy-off heel.

Straight pruning saw with holster.Lightweight saw of high-quality, stainless steel, with easy-to-grip handle. For sawing of wall boards, plastic tubes and branches. Practical belt holder included. Available in lengths of 240 and 300 mm.

foldable pruning saw.Lightweight saw of high-quality, stainless steel. Easy-to-grip handle. For sawing of wall boards, plastic tubes and branches. Available in lengths of 180 and 220 mm.

Protective glasses and goggles.Adjustable protective eyewear in non-scratch glass. Available in clear, tinted and yellow lenses.

Copyright © 2011 Husqvarna AB (publ). All rights reserved. Husqvarna and other product and feature marks are trademarks of the Husqvarna Group as displayed at www.international.husqvarna.com

Ste

ndah

ls.

115

40 1

2-26

INT.

LANDSCAPING AND GROUND CARESE-561 82 Huskvarna. Tel +46 36-14 65 00. Fax +46 36-14 68 25.

www.husqvarna.com

Documents

Husqvarna LGC Catalogues 2011 International