Hydraulic Hose

Braided - Multi-spiral - Powerwash - Thermoplastic - PTFE

Ranges from 3/16” to 2”

PART N

Hose SizeMin. Bend

Radius

Max. Working

Pressure

Min. Burst

PressureNominal

Braid Dia

Nominal

Hose OD

HYDRAULIC HOSE

DIN IMP. psi bar psi bar in. mm

PE105 04 3/16 9.5 11.5 3625 250 14500 1000 3.5 90

PE106 06 1/4 11.1 13.2 3263 225 13050 900 4.0 100

PE108 08 5/16 12.7 15.0 3118 215 12470 860 4.5 115

PE110 10 3/8 15.1 17.3 2610 180 10440 720 4.9 125

PE112 12 1/2 18.3 20.6 2320 160 9280 640 7.1 180

PE116 16 5/8 21.4 23.9 1885 130 7540 520 8.1 205

PE119 19 3/4 25.4 27.6 1523 105 6090 420 9.4 240

PE125 25 1 33.3 35.3 1305 90 5220 350 11.8 300

PART No. Braid Dia. Hose OD

1 WIRE BRAID HOSE - SAE 100R1S-AT - EN 853 1SN

1SN

PE131 31 1.1/4 40.5 43.2 914 63 3654 250 16.5 420

PE138 38 1.1/2 46.8 50.7 725 50 2900 200 19.7 500

PE151 51 2 60.2 64.2 580 40 2320 160 24.8 630

2 WIRE BRAID HOSE - SAE 100R2S-AT - EN 853 2SN

Special MSHA approved flame resistant outer cover can be provided on request.

Special Features: Qualified for double impulse cycles (300,000 cycles) to relevant standards‐SAE 100 R1S AT / EN 853 1SN / ISO 1436‐1SN. Good flexibility.Application: Medium to high pressure hydraulic lines. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water‐glycol based fluids and air. 

Liner: Synthetic oil resistant rubberReinforcement: One high tensile steel wire braidCover: Abrasion, ozone & weather resistant synthetic rubber.Working temperature : ‐40°C to 100°CIntermittent temperature: ‐ 40°C to +120°C (10% of total working hours).

For air application (max 70°C) & pressure above 17 bar cover must be pin pricked.

PE206 06 1/4 12.7 14.9 5800 400 23200 1600 3.9 100

PE208 08 5/16 14.3 16.7 5000 350 20000 1400 4.5 115

PE210 10 3/8 16.7 19.1 4785 330 19140 1320 4.9 125

PE212 12 1/2 19.8 22.1 3988 275 15950 1100 7.1 180

PE216 16 5/8 23.0 25.3 3625 250 14500 1000 8.1 205

PE219 19 3/4 27.0 29.6 3118 215 12470 850 9.4 240

PE225 25 1 35.1 37.7 2393 165 9570 650 11.8 300

PE231 31 1.1/4 44.7 47.7 1813 125 7250 500 16.5 420

PE238 38 1.1/2 50.8 54.0 1305 90 5220 360 19.7 500

PE251 51 2 63.3 67.5 1160 80 4640 320 24.8 630

2 WIRE BRAID HOSE - SAE 100R2S-AT - EN 853 2SN

Liner: Synthetic oil resistant rubber

2SN

PK106 06 1/4 10.5 12.5 3263 225 13050 900 2.0 50

PK108 08 5/16 11 5 13 5 3118 215 12470 860 2 2 55

1 WIRE BRAID COMPACT HOSE - EN857 1SC (smooth cover)

Special MSHA approved flame resistant outer cover can be provided on request.

Special Features: Qualified for double impulse cycles (400,000 cycles) to relevant standards‐SAE 100 R2S AT / EN 853 2SN / ISO 1436‐2SN. Good flexibility.

Liner: Synthetic oil resistant rubberReinforcement: Two high tensile steel wire braidsCover: Abrasion, ozone & weather resistant synthetic rubber.Working temperature : ‐40°C to 100°CIntermittent temperature: ‐ 40°C to +120°C (10% of total working hours).For air application (max 70°C) & pressure above 17 bar cover must be pin pricked.

Application: Medium to high pressure hydraulic lines. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water‐glycol based fluids and air. 

1SC PK108 08 5/16 11.5 13.5 3118 215 12470 860 2.2 55

PK110 10 3/8 13.7 15.7 2610 180 10440 720 2.4 60

PK112 12 1/2 17.0 19.0 2320 160 9280 640 2.8 70

PK116 16 5/8 20.4 22.4 1885 130 7540 520 3.5 90

PK119 19 3/4 23.8 25.8 1523 105 6090 420 3.9 100

PK125 25 1 31.4 33.5 1305 90 5220 360 6.3 160

Special Features: Qualified for double impulse cycles (300,000 cycles) to relevant standards‐EN 8571SC / ISO 11237‐1. Compact design results in good flexibility. Liner: Synthetic oil resistant rubber

Reinforcement: One high tensile steel wire braidCover: Abrasion, ozone & weather resistant  smooth synthetic rubber.

Application: Medium to high pressure hydraulic lines. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water‐glycol based

1SC

PK206 06 1/4 11.4 13.5 5800 400 23200 1600 2.0 50

PK208 08 5/16 13.0 15.0 5000 350 20000 1400 2.2 55

PK210 10 3/8 15.1 17.1 4785 330 19140 1320 2.6 65

PK212 12 1/2 18 3 20 5 3988 275 15950 1100 3 1 80

Special MSHA approved flame resistant outer cover can be provided on request.

2 WIRE BRAID COMPACT HOSE - EN857 2SC (smooth cover)

Working temperature : ‐40°C to 100°CIntermittent temperature: ‐ 40°C to +120°C (10% of total working hours).For air application (max 70°C) & pressure above 17 bar cover must be pin pricked.

hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water glycol based fluids and air. 

2SCPK212 12 1/2 18.3 20.5 3988 275 15950 1100 3.1 80

PK216 16 5/8 21.5 23.5 3625 250 14500 1000 3.5 90

PK219 19 3/4 25.5 27.5 3118 215 12470 860 4.0 120

PK225 25 1 33.5 35.5 2393 165 9570 660 5.9 150

Special Features: Qualified for double impulse cycles (400,000 cycles) to relevant standards‐EN 8572SC / ISO 11237‐1. Compact design results in good flexibility. Liner: Synthetic oil resistant rubber

Reinforcement: Two high tensile steel wire braidsCover: Abrasion, ozone & weather resistant smooth synthetic rubber.Working temperature : ‐40°C to 100°CIntermittent temperature: ‐ 40°C to +120°C (10% of total working hours).For air application (max 70°C) & pressure above 17 bar cover must be pin

Application: Medium to high pressure hydraulic lines. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water‐glycol based fluids and air. 

Special MSHA approved flame resistant outer cover can be provided on request.

For air application (max 70 C) & pressure above 17 bar cover must be pin pricked.

4.1.1.b

PART N

Hose SizeMin. Bend

Radius

Max. Working

Pressure

Min. Burst

PressureNominal

Braid Dia

Nominal

Hose OD

HYDRAULIC HOSE

DIN IMP. psi bar psi bar in. mm

BX206 06 1/4 11.4 13.5 6525 450 26100 1800 2.0 50

BX208 08 5/16 13.0 15.0 6000 420 24400 1680 2.6 65

BX210 10 3/8 15.1 17.1 5500 380 22040 1520 3.1 80

BX212 12 1/2 18.7 20.9 4713 325 18850 1300 3.5 90

BX216 16 5/8 21.5 25.1 4205 290 16820 1160 4.7 120

BX219 19 3/4 27.5 30.0 4000 280 16000 1120 4.7 120

BX225 25 1 33.5 35.5 3000 210 12000 840 5.9 150

2 WIRE BRAID COMPACT HOSE - Exceeds EN857 2SC

PART No. Braid Dia. Hose OD

Special Features:Working pressure exceeds by 15 30% to EN 857 2SC standard Good

2SC+

TH206 06 1/4 12.7 14.9 5800 400 23200 1600 3.9 100

Special MSHA approved flame resistant outer cover can be provided on request.

2 WIRE BRAID HIGH TEMPERATURE HOSE - Exceeds EN 853 2SN 135°C (max)

Special Features: Working pressure exceeds by 15‐30% to EN 857 2SC standard. Goodflexibility with low bend radius for complex high pressure hydraulic circuits. Validated for 300,000 impulse cycles.

Liner: Synthetic oil resistant rubberReinforcement: Two high tensile steel wire braidsCover: Abrasion, ozone & weather resistant synthetic rubber.Working temperature : ‐40°C to 100°CIntermittent temperature: ‐40°C to +120°C (10% of total working hours).

Application: Very high pressure hydraulic lines. Suitable for petroleum based hydraulic fluids, such as mineral oils, fuels, hydrocarbons and glycol‐water based fluids.

2SNT TH208 08 5/16 14.3 16.7 5000 350 20000 1400 4.5 115

TH210 10 3/8 16.7 19.1 4785 330 19140 1320 4.9 125

TH212 12 1/2 19.8 22.1 3988 275 15950 1100 7.1 180

TH216 16 5/8 23.0 25.3 3625 250 14500 1000 8.1 205

TH219 19 3/4 27.0 29.6 3118 215 12470 850 9.4 240

TH225 25 1 35.1 37.7 2393 165 9570 650 11.8 300

TH231 31 1.1/4 44.7 47.7 1813 125 7250 500 16.5 420

TH238 38 1.1/2 50.8 54.0 1305 90 5220 360 19.7 500

TH251 51 2 63.3 67.5 1160 80 4640 320 24.8 630

Liner: Synthetic oil resistant rubberR i f t T hi h t il t l i b id

Special Features: Excellent weather and ozone resistant. Suitable to work at high ambient temperature (100°C)

2SNT

BA206PK 06 1/4 11.1 12.8 5800 4000 26825 1850 1.8 45

BA208PK 08 5/16 12.7 14.5 5075 350 24650 1700 2.2 55

BA210PK 10 3/8 14.8 16.6 4785 330 21750 1500 2.6 65

BA212PK 12 1/2 18.3 20.1 3988 275 17690 1220 3.1 80

Supplied in standard temperature black cover. (Blue MSHA cover available on request.)

ADVANCED COVER 2 WIRE BRAID COMPACT HOSE - Exceeds EN857 2SC

Reinforcement: Two high tensile steel wire braidsCover: Heat, ozone & weather resistant synthetic rubber.Working temperature : ‐40°C to 135°CIntermittent temperature: ‐ 40°C to +150°C 

Application: Medium to High pressure hydraulic lines. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water‐glycol based fluids at 135°C

ambient temperature (100 C).

2SCB

BA216PK 16 5/8 21.5 23.5 3625 250 15225 1050 3.5 90

BA219PK 19 3/4 25.4 27.6 3553 245 14210 980 4.7 120

Special Features: Superior impulse life and abrasion resistance.Highly flame

resistant antistatic cover. High ozone, weather and UV resistance. Wide range of fluid compatibility. Exceeds working pressure for standard 2SC forDN19 and DN25. MSHA approved flame resistant cover.

Liner: Synthetic oil resistant rubberReinforcement: Two high tensile steel wire braidsCover: Abrasion, flame, ozone & weather resistant synthetic rubber.Working temperature : ‐40°C to 100°CIntermittent temperature: ‐40°C to +125°C (10% of total working hours).

Application: Medium to high pressure hydraulic lines in heavy duty applications. of forestry,minning & earth moving equipment.  Suitable for petroleum based hydraulic fluids, such as mineral oils,fuels, hydrocarbons and glycol‐water based fluids.

DIN IMP.

PE206R 06 1/4 80 28.82

PE210R 10 3/8 55 28.95

PE212R 12 1/2 45 28.80

PE219R 19 3/4 30 29.19 34-36 Mtr

2

2

1

1

2 WIRE BRAID HOSE ON REEL - EN 853 2SN

Coil LengthsCoil 1 Coil 2

Hose Size

Mts/Reel

Gross

Weight

(Kgs)

20-50 Mtr

20-50 Mtr

20-50 Mtr

50+ Mtr

50+ Mtr

20-50 Mtr

PART No.

Number of Hose

Coils

2SN

Special Features: Qualified for double impulse cycles (400,000 cycles) to relevant standards‐SAE 100 R2S AT / EN 853 2SN / ISO 1436‐2SN. Good flexibility.

Liner: Synthetic oil resistant rubberReinforcement: Two high tensile steel wire braidsCover: Abrasion, ozone & weather resistantsynthetic rubber.Working temperature : ‐40°C to 100°CIntermittent temperature: ‐ 40°C to +120°C (10% of total working hours).

Application: Medium to high pressure hydraulic lines. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water‐glycol based fluids and air

Features & Benefits of Hose Reels: Packaged on compact cardboard reels to allow quick and easy access.Can be conveniently placed on shafts easing the hose cutting process. Can be despatched on a Next Day parcel carrier saving time and money. Minimises wastage as each reel contains a fixed quantity of hose.

total working hours).For air application (max 70°C) & pressure above 17 bar cover must be pin pricked.

fluids and air. 

4.1.2.b

PART N

Hose SizeMin. Bend

Radius

Max. Working

Pressure

Min. Burst

PressureNominal

Braid Dia

Nominal

Hose OD

HYDRAULIC HOSE

DIN IMP. psi bar psi bar in. mm

PR410SP 10 3/8 17.5 21.4 6670 460 26680 1840 7.1 180

PR412SP 12 1/2 20.2 24.0 6235 430 24940 1720 9.0 230

PR416SP 16 5/8 23.8 27.6 5000 350 20000 1400 9.8 250

PR419SP 19 3/4 28.2 32.1 5000 350 20000 1400 11.8 300

PR425SP 25 1 35.6 38.7 4640 320 18560 1260 13.4 340

PR431SP 31 1.1/4 46.8 49.8 3000 210 12000 840 18.1 460

PR438SP 38 1.1/2 52.4 57.3 2755 190 11020 760 22.0 560

PR451SP 51 2 65.3 71.1 2610 180 10440 720 26.0 660

4 SPIRAL HOSE - EN 856 4SP - ISO 3862-1 4SP

PART No. Braid Dia. Hose OD

4SP

PR419SH 19 3/4 29.0 32.1 6000 420 24000 1680 11.8 280

4 SPIRAL HOSE - EN 856 4SH - ISO 3862-1 4SH

Liner: Synthetic oil resistant rubberReinforcement: Four high tensile steel wire spiralCover: High abrasion, ozone & weather resistantsynthetic rubber.Working temperature : ‐40°C to 100°CIntermittent temperature: ‐ 40°C to +120°C (10% of total working hours).

Special Features: Validated for 1,000,000 impulse cycles exceeding pressure rating of relevant standards. Good flexibility, weather and ozone resistant. MSHA approved flame resistant cover.

Application: High pressure, high impulse hydraulic applications eg. excavators, dozers, cranes, compactors, rock breakers, hydraulic drill rigs and other construction equipment. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water‐glycol based fluids and air.

4SH PR425SH 25 1 35.6 38.7 5655 390 22620 1560 13.4 340

PR431SH 31 1.1/4 42.5 45.5 5000 350 20000 1400 18.1 460

PR438SH 38 1.1/2 49.0 52.5 4205 290 16820 1160 22.0 560

PR451SH 51 2 63.5 67.5 3625 250 14500 1000 26.0 700

Liner: Synthetic oil resistant rubberReinforcement: Four high tensile steel wire spiralCover: High abrasion, ozone & weather resistantsynthetic rubber.Working temperature : ‐40°C to 100°C

Special Features: Validated for 1,000,000 impulse cycles exceeding pressure rating of relevant standards. Good flexibility, weather and ozone resistant. MSHA approved flame resistant cover.

Application: High pressure, high impulse hydraulic applications eg. excavators, dozers, cranes, compactors, rock breakers, hydraulic drill rigs and other construction equipment. Suitable for petroleum based hydraulic 

4SH

IM41035 10 3/8 17.5 20.6 5000 350 20000 1400 5.1 130

IM41235 12 1/2 21.0 24.0 5000 350 20000 1400 7.1 180

IM41635 16 5/8 24.6 27.6 5000 350 20000 1400 7.9 200

IM41935 19 3/4 29.0 32.1 5000 350 20000 1400 9.4 240

IM42535 25 1 35.6 38.7 5000 350 20000 1400 11.8 300

IM63135 31 1.1/4 46.8 49.8 5000 350 20000 1400 16.5 420

4 & 6 SPIRAL HOSE - EN 856 R13 - SAE 100 R13 - ISO 3862-1 R13

Intermittent temperature: ‐ 40°C to +120°C (10% of total working hours).

R13

IM63835 38 1.1/2 54.3 57.3 5000 350 20000 1400 19.7 500

IM65135 51 2 68.1 71.1 5000 350 20000 1400 23.6 600

4 & 6 SPIRAL HOSE SAE 100 R15 ISO 3862 1 R15

Liner: Synthetic oil resistant rubberReinforcement: Four high tensile steel wire spiralon 3/8" to 1" & 6 spiral on 1.1/4" to 2" Cover: High abrasion, ozone & weather resistantsynthetic rubber.Working temperature : ‐40°C to 121°CIntermittent temperature: ‐ 40°C to +125°C (10% of total working hours).

Special Features: Validated for 1,000,000 impulse cycles. Constant pressure rating across all hose sizes. Good flexibility, weather and ozone resistant. MSHA approved flame resistant cover.

Application: High pressure, high impulse hydraulicapplications eg. excavators, dozers, cranes, compactors, rock breakers, hydraulic drill rigs and other construction equipment. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water‐glycol based fluids and air.

IM41042 10 3/8 17.5 21.4 6000 420 24000 1680 7.0 180

IM41242 12 1/2 21.6 24.6 6000 420 24000 1680 9.0 230

IM41642 16 5/8 25.6 28.6 6000 420 24000 1680 9.8 250

IM41942 19 3/4 28.2 32.0 6000 420 24000 1680 10.6 270

IM42542 25 1 35.5 39.0 6000 420 24000 1680 11.8 300

IM63142 31 1.1/4 46.8 50.0 6000 420 24000 1680 16.5 420

IM63842 38 1.1/2 55.0 58.0 6000 420 24000 1680 19.7 500

IM65142 51 2 69.0 72.0 6000 420 24000 1680 23.6 600

4 & 6 SPIRAL HOSE - SAE 100 R15 - ISO 3862-1 R15

Liner: Synthetic oil resistant rubberReinforcement: Four high tensile steel wire spiral Special Features: Validated for 1 000 000 impulse cycles Constant pressure rating across all hose

R15

Reinforcement: Four high tensile steel wire spiralon 3/8" to 1" & 6 spiral on 1.1/4" to 2" Cover: High abrasion, ozone & weather resistantsynthetic rubber.Working temperature : ‐40°C to 121°CIntermittent temperature: ‐ 40°C to +125°C (10% of total working hours).

Application: High pressure, high impulse hydraulicapplications eg. excavators, dozers, cranes, compactors, rock breakers, hydraulic drill rigs and other construction equipment. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water‐glycol based fluids and air.

Special Features: Validated for 1,000,000 impulse cycles. Constant pressure rating across all hose sizes. Good flexibility, weather and ozone resistant. MSHA approved flame resistant cover.

4.1.3.b

H Si

Max. Working

P

Min. Burst

PN i l N i l

Min.

Bend

R di

Hose

C l

PRESSURE WASHER HOSE

DIN IMP. psi bar psi bar mm

AQ106BL 06 1/4 11.2 13.2 3625 250 13050 900 100 Black

AQ106BU 06 1/4 11.2 13.2 3625 250 13050 900 100 Blue

AQ108BL 08 5/16 13.0 15.0 3625 250 12325 850 115 Black

AQ108BU 08 5/16 13.0 15.0 3625 250 12325 850 115 Blue

AQ110BL 10 3/8 15.3 17.3 3625 250 11963 825 130 Black

AQ110BU 10 3/8 15.3 17.3 3625 250 11963 825 130 Blue

AQ112BL 12 1/2 18.5 20.6 3000 210 10150 700 180 Black

1 WIRE BRAID POWERWASH HOSE - 160°C (max)

PART No.

Hose Size Pressure PressureNominal

Braid Dia.

Nominal

Hose OD

Radius Colour

W250

AQ112BU 12 1/2 18.5 20.6 3000 210 10150 700 180 Blue

AQ206BL 06 1/4 12.7 14.9 5800 400 23200 1600 100 Black

Available in colours. BL=Black - BU=Blue

2 WIRE BRAID POWERWASH HOSE - 160°C (max)

Pin-pricked cover can be provided on request.

Liner: Synthetic water resistant rubberReinforcement: One high tensile steel wire braidCover: Non‐marking ,heat, abrasion, ozone & weather resistant synthetic rubber.Working temperature : ‐40°C to 160°C

Application: Suitable for Professional Pressure Washer applications up to 160°C.

Special Features: Light weight, high abrasion resistance & excellent resistance to ozone & common detergent solutions. No colour wash off. Conforms to high pressure wash jet machine hose safety requirements as per BS EN 1829. Not recommended for steam service.

W400 AQ206BU 06 1/4 12.7 14.9 5800 400 23200 1600 100 Blue

AQ208BL 08 5/16 14.6 16.7 5800 400 20300 1400 115 Black

AQ208BU 08 5/16 14.6 16.7 5800 400 20300 1400 115 Blue

AQ210BL 10 3/8 17.2 19.1 5800 400 18850 1300 130 Black

AQ210BU 10 3/8 17.2 19.1 5800 400 18850 1300 130 Blue

AQ212BL 12 1/2 20.0 22.1 5800 400 17400 1200 180 Black

AQ212BU 12 1/2 20.0 22.1 5800 400 17400 1200 180 Blue

Available in colours. BL=Black - BU=Blue Liner: Synthetic water resistant rubberReinforcement: Two high tensile steel wire braidsCover: Heat, abrasion, ozone & weather resistantsynthetic rubber.

W400

Special Features: Light weight, high abrasion resistance & excellent resistance to ozone & common detergent solutions. No colour wash off. Conforms to high pressure wash jet machine hose safety 

AQ106BLK 06 1/4 10.5 12.5 3625 250 13050 900 50 Black

AQ106BUK 06 1/4 10.5 12.5 3625 250 13050 900 50 Blue

AQ108BLK 08 5/16 11.5 13.5 3625 250 12325 850 55 Black

AQ108BUK 08 5/16 11.5 13.5 3625 250 12325 850 55 Blue

AQ110BLK 10 3/8 13 7 15 7 3625 250 11963 825 60 Black

Pin-pricked cover can be provided on request.

1 WIRE BRAID COMPACT POWERWASH HOSE - 160°C (max)

Working temperature : ‐40°C to 160°CApplication: Suitable for Professional Pressure Washer applications up to 160°C.

g g p j y

requirements as per BS EN 1829. Not recommended for steam service.

W250C

AQ110BLK 10 3/8 13.7 15.7 3625 250 11963 825 60 Black

AQ110BUK 10 3/8 13.7 15.7 3625 250 11963 825 60 Blue

AQ112BLK 12 1/2 17.0 19.0 3000 210 10150 700 70 Black

AQ112BUK 12 1/2 17.0 19.0 3000 210 10150 700 70 Blue

Pin-pricked cover can be provided on request.

Available in colours. BLK=Black - BUK=Blue Liner: Synthetic water resistant rubberReinforcement: One high tensile steel wire braidCover: Non‐marking ,heat, abrasion, ozone & weather resistant synthetic rubber.Working temperature : ‐40°C to 160°C

Special Features: Light weight, high abrasion resistance & excellent resistance to ozone & common detergent solutions. No colour wash off. Conforms to high pressure wash jet machine hose safety requirements as per BS EN 1829. Not recommended for steam service.

Application: Suitable for Professional Pressure Washer applications up to 160°C.

AQ206BLK 06 1/4 11.5 13.5 5800 400 23200 1600 50 Black

AQ206BUK 06 1/4 11.5 13.5 5800 400 23200 1600 50 Blue

AQ208BLK 08 5/16 13.0 15.0 5800 400 20300 1400 55 Black

AQ208BUK 08 5/16 13.0 15.0 5800 400 20300 1400 55 Blue

AQ210BLK 10 3/8 15.1 17.1 5800 400 18850 1300 65 Black

AQ210BUK 10 3/8 15.1 17.1 5800 400 18850 1300 65 Blue

AQ212BLK 12 1/2 18.3 20.5 5800 400 17400 1200 80 Black

AQ212BUK 12 1/2 18.3 20.5 5800 400 17400 1200 80 Blue

Available in colours BLK=Black - BUK=Blue

2 WIRE BRAID COMPACT POWERWASH HOSE - 160°C (max)

Liner: Synthetic water resistant rubber

W400C

Available in colours. BLK Black BUK Blue

Pin-pricked cover can be provided on request.

Liner: Synthetic water resistant rubberReinforcement: Two high tensile steel wire braidsCover: Heat, abrasion, ozone & weather resistantsynthetic rubber.Working temperature : ‐40°C to 160°C

Application: Suitable for Professional Pressure Washer applications up to 160°C.

Special Features: Light weight, high abrasion resistance & excellent resistance to ozone & common detergent solutions. No colour wash off. Conforms to high pressure wash jet machine hose safety requirements as per BS EN 1829. Not recommended for steam service.

4.1.4.b

PART N

Hose SizeMin. Bend

Radius

Max. Working

Pressure

Min. Burst

PressureIntrenal

Hose Dia

Nominal

Hose OD

THERMOPLASTIC HOSE

DIN IMP. psi bar psi bar in. mm

R7205TH 05 3/16" 4.8 10.0 3045 210 12180 840 1.18 30

R7206TH 06 1/4" 6.4 11.8 2900 200 11600 800 1.38 35

R7208TH 08 5/16" 8.0 14.3 2755 190 11020 760 1.77 45

R7210TH 10 3/8" 9.7 16.0 2537 175 10150 700 2.17 55

R7212TH 12 1/2" 13.0 20.3 2030 140 8120 560 2.95 75

R7219TH 19 3/4" 19.2 26.5 1305 90 5220 360 5.71 145

R7225TH 25 1" 25.6 32.5 1015 70 4060 280 7.87 200

2 POLYESTER BRAID THERMOPLASTIC HOSE - SAE 100 R7 - EN 855 R7

PART No. Hose Dia. Hose OD

Liner: Thermoplastic technopolymer.

Reinforcement: Two synthetic fibre braids

R7

R7205THTW 05 3/16" 4.8 10.0 3045 210 12180 840 1.18 30

R7206THTW 06 1/4" 6.4 11.8 2900 200 11600 800 1.38 35

R7208THTW 08 5/16" 8.0 14.3 2755 190 11020 760 1.77 45

R7210THTW 10 3/8" 9.7 16.0 2537 175 10150 700 2.17 55

R7212THTW 12 1/2" 13.0 20.3 2030 140 8120 560 2.95 75

R7219THTW 19 3/4" 19.2 26.5 1305 90 5220 360 5.71 145

2 POLYESTER BRAID THERMOPLASTIC TWIN HOSE - SAE 100 R7 - EN 855 R7

Applications: Medium pressure general hydraulic applicationsHydraulic instrumentation and movable tooling.

Reinforcement: Two synthetic fibre braids.Cover: Abrasion resistant black polyurethane.Working temperature : ‐40°C to 100°C (‐40°C to 70°C  water & air)

R7

R7225THTW 25 1" 25.6 32.5 1015 70 4060 280 7.87 200

R8205TH 05 3/16" 4.8 10.0 5075 350 20300 1400 1.38 35

R8206TH 06 1/4" 6.4 11.8 5075 350 20300 1400 1.97 50

R8208TH 08 5/16" 8.0 14.3 4712 325 18850 1300 2.36 60

R8210TH 10 3/8" 9.7 16.0 4060 280 16240 1120 2.76 70

R8212TH 12 1/2" 13 0 20 3 3552 245 14210 980 3 74 95

2 ARAMID BRAID THERMOPLASTIC HOSE - SAE 100 R8 - EN 855 R8

R8

R8212TH 12 1/2" 13.0 20.3 3552 245 14210 980 3.74 95

R8219TH 19 3/4" 19.2 26.5 2392 165 9570 660 5.91 150

R8225TH 25 1" 25.6 34.7 2100 145 8410 580 7.87 200

R8205THTW 05 3/16" 4.8 10.0 5075 350 20300 1400 1.38 35

R8206THTW 06 1/4" 6.4 11.8 5075 350 20300 1400 1.97 50

R8208THTW 08 5/16" 8.0 14.3 4712 325 18850 1300 2.36 60

2 ARAMID BRAID THERMOPLASTIC TWIN HOSE - SAE 100 R8 - EN 855 R8

Liner: Thermoplastic technopolymer.

Reinforcement: Two aramidic Kevlar fibre braids.

Cover: Abrasion resistant black polyurethane.Working temperature : ‐40°C to 100°C (‐40°C to 70°C  water & air)

Applications: Medium to high pressure general hydraulic applications. High pressure pneumatic systems.

R8R8210THTW 10 3/8" 9.7 16.0 4060 280 16240 1120 2.76 70

R8212THTW 12 1/2" 13.0 20.3 3552 245 14210 980 3.74 95

R8219THTW 19 3/4" 19.2 26.5 2392 165 9570 660 5.91 150

R8225THTW 25 1" 25.6 34.7 2100 145 8410 580 7.87 200

R7205THNC 05 3/16" 4.8 10.0 3045 210 12180 840 1.18 30

2 POLYESTER BRAID THERMOPLASTIC HOSE - SAE 100 R7 Non-conductive

R7 R7206THNC 06 1/4" 6.4 11.8 2900 200 11600 800 1.38 35

R7208THNC 08 5/16" 8.0 14.3 2755 190 11020 760 1.77 45

R7210THNC 10 3/8" 9.7 16.0 2537 175 10150 700 2.17 55

R7212THNC 12 1/2" 13.0 20.3 2030 140 8120 560 2.95 75

R7219THNC 19 3/4" 19.2 26.5 1305 90 5220 360 5.71 145

R7225THNC 25 1" 25.6 32.5 1015 70 4060 280 7.87 200

2 POLYESTER BRAID THERMOPLASTIC HOSE - SAE 100 R8 Non-conductive

Applications: Medium to high pressure  applications requiring  a high electrical isolation.

Liner: Thermoplastic technopolymer.

Reinforcement: Two synthetic fibre braids.Cover: Abrasion resistant orange polyurethane.Working temperature : ‐40°C to 100°C (‐40°C to 70°C  water & air)

R7

R8205THNC 05 3/16" 4.8 10.0 3045 210 12180 840 1.18 30

R8206THNC 06 1/4" 6.4 11.8 2900 200 11600 800 1.38 35

R8208THNC 08 5/16" 8.0 14.3 2755 190 11020 760 1.77 45

R8210THNC 10 3/8" 9.7 16.0 2537 175 10150 700 2.17 55

R8212THNC 12 1/2" 13.0 20.3 2030 140 8120 560 2.95 75

R8219THNC 19 3/4" 19.2 26.5 1305 90 5220 360 5.71 145

R8225THNC 25 1" 25.6 32.5 1015 70 4060 280 7.87 200Liner: Thermoplastic technopolymer.

Reinforcement: Two aramidic Kevlar fibre braids.Cover: Abrasion resistant orange polyurethane.Working temperature : ‐40°C to 100°C (‐40°C to 70°C  water & air)

Applications: Medium to high pressure  applications requiring  a high electrical isolation.

R8

4.1.7.b

P T F E HOSE

Part No.

Nominal

I.D. Bore

Size Ins.

Nominal

I.D. Bore

Size mm

Working

Pressure

Bar

Burst

Pressure

Bar

Mild Steel

Ferrule

Part No.

Stainless

Ferrule

Part No.

SMOOTH BORE PTFE HOSE WITH 304 STAINLESS STEEL ONE WIRE BRAIDHPTFE SB 06 1/4" 6.70 175 700 PTTB.06 VPTTB.06

HPTFE SB 10 3/8" 10.00 135 540 PTTB.10 VPTTB.10

HPTFE SB 13 1/2" 13.40 120 480 PTTB.13 VPTTB.13

HPTFE SB 16 5/8" 16.60 100 400 PTTB.16 VPTTB.16

HPTFE SB 19 3/4" 19.80 90 360 PTTB.19 VPTTB.19

HPTFE SB 25 1" 26 10 65 260 PTTB 25 VPTTB 25HPTFE SB 25 1 26.10 65 260 PTTB.25 VPTTB.25

Liner: Smooth PTFECover: One high tensile 304 stainless steel wire braid.Working temperature : ‐60°C to 260°C

Applications:  Low Pressure Hydraulics, Food, Distilling, Air Conditioning, Marine, Chemical, Industrial Gases, Process Plant etc.

Special Features: Inert to virtually all chemicals. Resistance to weathering/ageing, unaffected by UV light, resistant to oxidation, non‐flammable, low permeability, solevent resistant and a wide 

CONVOLUTED PTFE HOSE WITH 304 STAINLESS STEEL ONE WIRE BRAIDHPTFE C 06 1/4" 6.73 160 510 PTC.06 VPTC.06

HPTFE C 10 3/8" 9.14 120 480 PTC.10 VPTC.10

HPTFE C 13 1/2" 12.45 110 440 PTC.13 VPTC.13

HPTFE C 16 5/8" 15.37 80 320 PTC.16 VPTC.16

HPTFE C 19 3/4" 18.54 70 280 PTC.19 VPTC.19

HPTFE C 25 1" 24.89 50 200 PTC.25 VPTC.25

HPTFE C 32 1.1/4" 31 45 180 PTCE.32 VPTC.32

HPTFE C 38 1.1/2" 37.5 40 160 PTCE.38 VPTC.38

HPTFE C 50 2" 48 36 144 PTCE.50 VPTC.50

Liner:  Helically Convoluted  PTFECover: One high tensile 304 stainless steel wire braid.Working temperature : ‐60°C to 260°C

Applications: Low Pressure Hydraulics Food Distilling Air Conditioning Marine Chemical Industrial Gases Process Plant etc

Special Features: Inert to virtually all chemicals. Resistance to weathering/ageing, unaffected by UV light, resistant to oxidation, non‐flammable, low permeability, solevent resistant and a wide 

Notes

NOTE 1: DistagQCS standard range of fittings can be used on PTFE hose in

Applications:  Low Pressure Hydraulics, Food, Distilling, Air Conditioning, Marine, Chemical, Industrial Gases, Process Plant etc.

NOTE 1: DistagQCS standard range of fittings can be used on PTFE hose inconjunction with the above ferrules.

NOTE 2: DistagQCS offer an assembly and testing service to customer specifications.    

4.1.8.b

Ferrule Part No Hose Type Specification Size Range Identification

FERRULE SELECTION CHART

POWERWASH W250

POWERWASH W250C

EN 856 4SP - ISO 3862-1 4SP 3/8" to 2"

2SC+ 5/8" to 1"

POWERWASH W400PF12

1/4" to 1/2"

1/4" to 1/2" Roll Stamped PF11PF11

Roll Stamped PF12

POWERWASH W400C

EN 857 1SC

EN 857 2SC

2SC+ 1/4" to 1/2"

EN 853 1SN - SAE R1AT 1/4" to 1"

1/4 to 1/2

1/4" to 1"

PF15 Roll Stamped PF15

EN 853 1SN - SAE R1AT 1.1/4" to 2"

EN 853 2SN - SAE R2AT 1/4" to 2"

Thermoplastic EN 855 R7

Thermoplastic EN 855 R83/16" to 1/2"PF23

PF22 Roll Stamped PF22

Roll Stamped PF23

PTFE Convoluted Extruded

Stainless Steel 1 Wire Braid

PTFE Convoluted Tape Wrapped

Stainless Steel 1 Wire Braid

PTC1/4" to 2"

1/4" to 1"

Roll Stamped PTC

PTFE Convoluted Extruded

Stainless Steel 1 Wire Braid

PTFE Smooth Bore

Stainless Steel 1 Wire Braid

EN 856 4SH ISO 3862 1 4SH 3/4" t 2"

1.1/4" to 2"

1/4" to 1"

PTCE

PTTB

Roll Stamped PTCE

Roll Stamped PTTB

EN 856 4SH - ISO 3862-1 4SH 3/4" to 2"

EN 856 R13 - SAE 100 R13

SAE 100 R15 - ISO 3862-1 R15

EN 856 R13 - SAE 100 R13

SAE 100 R15 - ISO 3862-1 R151.1/4" to 2" Roll Stamped MPF4MPF4

MPF33/4" to 1"

Roll Stamped MPF3

EN 853 1SN - SAE R1AT

EN 853 2SN - SAE R2AT

R710

R720

1/4" to 3/4"

Two Rings at Thread End

One Ring at Thread End

1/4" to 3/4"

4.1.9.b