Upload
charan
View
10
Download
4
Embed Size (px)
DESCRIPTION
hydraulic engineering
Citation preview
CE 3500 : HYDRAULIC ENGINEERING
Class Meets in ROOM 133
Monday (09:00 am to 10:30 am)
Thursday (10:30 am to 12:00 noon)
Faculty : Dr. K.B.V.N.Phanindra
TA : Yet to be allotted
Office Hours : (Room # 64)
Tuesday (10:00 am to 01:00 pm)
Friday (10:00 am to 01:00 pm)
Course E-Mail: [email protected]
Pre-Requisite to CE 3500:
ID2030 (Fluid Mechanics and Rate Process)
Student is Expected to be familiar with: – 1 Lecture
Basic properties of fluids
Fluid Kinematics
Fluid Dynamics
Apply Mass balance (Continuity), Momentum, and
Energy equations
Flow measurement devices
Laminar and Turbulent Flows in pipes
CE 3500 : Course Contents
1. Hydraulics of Closed Conduits (Steady state) – 3 Lectures
Analysis of flow through pipes
Energy/Head Losses in pipe flow
Pipe Systems
Pipe Networks – Iterative solutions
2. Hydraulics of Closed Conduits (Transient state) – 5 Lectures
Analysis of pressure waves
Governing Equations
Surge protection devices
Surge Analysis
TWO Assignments (Overall Topics) + TWO Term Projects (Transient analysis)
CE 3500 : Course Contents
3. Hydraulics of Open Channels – 8 Lectures
Velocity and Pressure Distribution in Open Channels
Energy-Depth Relations
Uniform Flow Computations
Introduction to:
Gradually Varied Flow
Rapidly Varied Flow
TWO Assignments (Overall Topics) + ONE Term Project (Uniform Flow Computations)
CE 3500 : Course Contents
5. Hydraulic Machines (Pumps) – 4 Lectures
Types and Working of Pumps
Velocity Triangles for Centrifugal pumps
Priming and Cavitation conditions
Unit / Specific Quantities
Characteristic curves
ONE Assignment (Overall Topics) + ONE Term Project (Pump Characteristic Curves)
CE 3500 : Course Contents
6. Hydraulic Machines (Turbines) – 4 Lectures
Types and Working of Turbines
Velocity Triangles
Unit / Specific Quantities
Characteristic curves
ONE Assignment (Overall Topics) + ONE Term Project (Turbine Characteristics)
CE 3500 : Scheme of Evaluation
Assignments 20 %
(Best FIVE out of Six Assignments will be considered*)
Term Project 20 %
(Evaluated based on approach, results, and presentation)
Mid-Exam 20 %
(Open-Book Exam)
End-Exam 30 %
(Closed-Book Exam)
Attendance 10 %
CE 3500 : Text Books
Text Books:
1) Hydraulic Engineering by John A. Roberson, John J. Cassidy, M. Hanif Chaudhry – John Wiley and Sons
2) Flow in Open Channels by K. Subramanya – Tata McGraw-Hill
3) Fluid Mechanics and Hydraulic Machines by K. Subramanya – Tata McGraw-Hill
Reference Books:
1) Fundamentals of Hydraulic Engineering Systems by Houghtalen, Osam Khan, and Hwang – Perarson Publications
2) Open Channel Hydraulics by Terry Sturm - Tata McGraw-Hill
3) Introduction to Fluid Mechanics by Robert W Fox and Alan T McDonald – Wiley India