46
Hydraulic Hoses and Couplings DAYCO EASTMAN RUBBER HOSE PRODUCTS LOW PRESSURE HOSE Style C and U4 Style U3 and A6 Style A2 and HAW Style B9 and B7 Style B7S and TC4 Style DL5 and DL6 MEDIUM PRESSURE HOSE Style D1and T1 Style T4 and GL Style Y9 and R5 Style M and D8 Style MX and E7A Style E9 and S7 Style S7E and NR7 Style NR7E and C2 Style ST and AX Style HFS and HR1C Style AM and H6 Style D6 and R6 HIGH PRESSURE HOSE Style BA and BXX Style BXP and RT2 Style J4 and J4A Style J9 and S8 Style S8E and FX Style HFS2 and HR2C Style DT and SNK2 Style F2 and HTB Style HRK SPIRAL WIRE REINFORCED HOSE Style QX and L1 Style CE and M7 Style M8 and CZ Style CN and N3 Style NH and N6 Style HT6 and N2 Style H7 SPECIALTY HOSE Style BH and BCH Style C6 and Y1 Style Y7 and W5 Style HLB and HSH2 Style HPC and HPS Style P3 and S6 Style S9 Style S5 and HJK Style WB and W7 Style W8 HYTRON HOSE Style TC, TNR7E,TNR7,TS7E,TS7, TS8E and TS8

Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

Embed Size (px)

Citation preview

Page 1: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

Hydraulic Hoses and Couplings

DAYCO EASTMAN RUBBER HOSE PRODUCTS

LOW PRESSURE HOSE

Style C and U4Style U3 and A6Style A2 and HAWStyle B9 and B7Style B7S and TC4Style DL5 and DL6

MEDIUM PRESSURE HOSE

Style D1and T1Style T4 and GLStyle Y9 and R5Style M and D8Style MX and E7AStyle E9 and S7Style S7E and NR7Style NR7E and C2Style ST and AXStyle HFS and HR1CStyle AM and H6Style D6 and R6

HIGH PRESSURE HOSE

Style BA and BXXStyle BXP and RT2Style J4 and J4AStyle J9 and S8Style S8E and FXStyle HFS2 and HR2CStyle DT and SNK2Style F2 and HTBStyle HRK

SPIRAL WIRE REINFORCEDHOSE

Style QX and L1Style CE and M7Style M8 and CZStyle CN and N3Style NH and N6Style HT6 and N2Style H7

SPECIALTY HOSE

Style BH and BCHStyle C6 and Y1Style Y7 and W5Style HLB and HSH2Style HPC and HPSStyle P3 and S6Style S9Style S5 and HJKStyle WB and W7Style W8

HYTRON HOSE

Style TC, TNR7E,TNR7,TS7E,TS7,TS8E and TS8

Page 2: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT

Low Pressure HoseWorking Pressures to 500 PSI

33

NOTE: Hose and Coupling compatabilities noted in this catalog are for reference purposes only. Dayco Eastman crimping specifications are the official guide for selecting appropriate hose and coupling combinations and determining crimper compatability.

CSAE 100R4

Applications: Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg.

Temperature Range: -40˚ F to +212˚ F

SAE/USCG Marine Listed

Tube: Nitrile

Reinforcement: Two textile braids with helix wire

Cover: Neoprene–MSHA approved

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

C12C16C20

C24C32C40

C48

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/4 1.25 300 1,200 5.0 49 HY 1321 1.50 250 1,000 6.0 61 HY 132

1-1/4 1.77 200 800 8.0 76 HY 132

1-1/2 2.08 150 600 10.0 114 HR 1232 2.50 100 400 12.0 122 HR 123

2-1/2 3.13 62 250 14.0 185 HR 123 CA 244

3 3.63 56 225 18.0 241 HR 123 CA 244

U4SAE 100R4

Applications: Used for suction or return line on hydraulic systems. Excellent flexibility. Vacuum 25 Inches Hg.

Temperature Range: -40˚ F to +250˚ F

SAE/USCG Marine Listed

Tube: Nitrile

Reinforcement: Textile reinforcement with helix wire

Cover: Oil and weather resistant synthetic rubber–MSHA approved

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

U412U416U420

U424U332U440U448

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/4 1.23 300 1,200 3.0 50 HY 132 CA 2441 1.48 250 1,000 4.0 64 HY 132 CA 244

1-1/4 1.77 200 800 5.0 87 HY 132 CA 244

1-1/2 2.05 150 600 7.0 122 HR 123 CA 2442 2.50 100 400 10.0 139 HR 123 CA 244

2 1/2 3.11 62 250 12.0 206 HR† 123 CA 2443 3.61 56 225 14.0 251 HR† 123 CA 244

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

† Requires special tooling. Contact Dayco Eastman.

Page 3: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

Low Pressure HoseWorking Pressures to 500 PSI

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT 34

A6SAE 100R6

Applications: Used for low pressure hydraulic lines, flexiblefuel lines, power steering return lines and lubricating lines.

Temperature Range: -40˚ F to +250˚ F

SAE/USCG Marine Listed

Tube: Nitrile

Reinforcement: One textile braid

Cover: Neoprene–MSHA approved

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

A603A604A605

A606A608A610

A612

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/16 .44 500 2,000 2.0 7 GD†-HF 1191/4 .50 400 1,600 2.5 9 GD†-GW-HY 1325/16 .56 400 1,600 3.0 10 GD†-HY 132

3/8 .63 400 1,600 3.0 12 GD†-GW-HY 1321/2 .78 400 1,600 4.0 17 GD†-GW-HY 1325/8 .91 350 1,400 5.0 20 GD†-HF-HY 132

3/4 1.06 300 1,200 6.0 26 GD†-HY 132

U3SAE 100R4

Applications: Used for suction or return line on hydraulic systems. Excellent flexibility. Vacuum 25 Inches Hg.

Temperature Range: -40˚ F to +250˚ F

SAE/USCG Marine Listed

Tube: Nitrile

Reinforcement: Textile reinforcement with helix wire

Cover: Oil and weather resistant synthetic rubber–MSHA approved

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

U312U316U320

U324U332U340U348

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/4 1.25 300 1,200 3.0 51 HY 132 CA 2441 1.50 250 1,000 4.0 64 HY 132 CA 244

1-1/4 1.80 200 800 5.0 86 HY 132 CA 244

1-1/2 2.08 150 600 7.0 104 HR 123 CA 2442 2.50 100 400 10.0 116 HR 123 CA 244

2 1/2 3.13 62 250 12.0 188 HR† 123 CA 2443 3.63 56 225 14.0 226 HR† 123 CA 244

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

† Requires special tooling. Contact Dayco Eastman.

Page 4: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT35

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

A2SAE 100R6

High Temperature

Applications: Used for high temperature, low pressurehydraulic lines, flexible fuel lines, power steering return lines,lubricating lines, and hot transmission lines.

Temperature Range: -40˚ F to +300˚ F

Tube: Chlorinated Polyethylene

Reinforcement: One textile braid

Cover: Chlorinated Polyethylene

PERMANENT REUSABLE

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

CatalogNumber

A204A205A206

A208A210A212

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .50 400 1,600 2.5 10 GD†-GW-HY 1325/16 .56 400 1,600 3.0 11 GD†-HY 1323/8 .63 400 1,600 3.0 13 GD†-GW-HY-KF 132

1/2 .78 400 1,600 4.0 18 GD†-GW-HY 1325/8 .91 350 1,400 5.0 21 GD†-HF-HY 1323/4 1.09 300 1,200 6.0 31 GD†-HY 132

Low Pressure HoseWorking Pressures to 500 PSI

Applications: Used for low pressure air and water applica-tions where pressures do not exceed 250 PSI

Not recommended for use with petroleum based fluidsTemperature Range: -15˚ F to +150˚ FKA series push-on coupling is not recommended where pres-

sure and/or temperature exceeds +100˚F and 100 PSI

Tube: PVC

Reinforcement: One braid of polyester fiber

Cover: PVC, pin-pricked. Colors: Grey (all sizes); Red and Blue(sizes -04, -06 and -08)

HAWHytron® Push-On

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

HAW03HAW04HAW05

HAW06HAW08HAW12

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/16 .35 250 1,000 .5 4 GH†-SU 1951/4 .44 250 1,000 .6 6 HY-KF 132 KA 2195/16 .50 250 1,000 .8 8 HY-KF 132 KA 219

3/8 .63 250 1,000 .9 11 HY-KF 132 KA 2191/2 .78 250 1,000 1.2 16 HY-KF 132 KA 2193/4 1.10 250 1,000 2.5 28 GD†-HY 132 KA 219

† Requires special tooling. Contact Dayco Eastman.

Page 5: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT 36

Low Pressure HoseWorking Pressures to 500 PSI

Applications: Used for low pressure transmission of oil, gaso-line, air, water, coolants, etc. Should not be used on impulseapplications

Temperature Range: -40˚F to +212˚F-40˚F to +160˚F for gaseous applications

**NOTE: Do not exceed 250 PSI working pressure whenusing KA style push-on couplings.

Tube: Nitrile

Reinforcement: One textile braid (except B716 is four spiral layers)

Cover: Black oil and weather resistant synthetic rubber –MSHA approved

B7Push-On Low Pressure PERMANENT REUSABLE

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

CatalogNumber

B703B704B705

B706B708B710B716

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/16 .36 400 1,600 1.0 4 GH†-KF 2221/4 .50 375 1,500 3.0 9 GD†-HY-KF 132 KA 2195/16 .56 300 1,200 3.0 10 GD†-HY-KF 132 KA 219

3/8 .62 300 1,200 3.0 11 GD†-HY-KF 132 KA 2191/2 .75 300 1,200 5.0 15 GD†-HY-KF 132 KA 2195/8 .91 300 1,200 6.0 20 GD†-HY-KF 132 KA 2191 1.44 300 1,200 8.0 26 HY 132

Applications: Used for low pressure transmission of gaso-line, oil, air, water and coolants where operation pressures donot exceed 250 PSI

Temperature Range: -40˚F to +200˚F(130˚F maximum with water)

KA series push-on coupling is not recommended where pres-sure and/or temperature exceeds +100˚F and 100 PSI

Tube: Red polyurethane

Reinforcement: One braid of polyester fiber

Cover: Red abrasion resistant polyurethane

B9Hytron® Push-On

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

B903B904B905

B906B908B910

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/16 .38 250 1,000 1.0 4 GH†-KF 2221/4 .45 250 1,000 1.5 5 KF 222 KA 2195/16 .54 250 1,000 2.0 8 KF 222 KA 219

3/8 .63 250 1,000 3.0 9 GD†-KF 222 KA 2191/2 .77 250 1,000 3.0 13 KF 222 KA 2195/8 .92 250 1,000 4.0 20 KF 222 KA 219

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

† Requires special tooling. Contact Dayco Eastman.

Page 6: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT37

Applications: Used for low pressure transmission of oil, gasoline, air, water, coolants, etc. Should not be used onimpulse applicationsTemperature Range: -40˚ F to +212˚ FNote: Do not exceed 250 PSI working pressure whenusing KA push-on couplings.

Tube: Nitrile

Reinforcement: One textile braid

Cover: Oil and weather resistant synthetic rubber–MSHA approved**Colors: Black–BK Green–GN

Gray–GY Red–RDOff White–WH Yellow–YLBlue–BL Brown–BR

B7SAbrasion King® Push-On

Low Pressure Silicone FreePERMANENT REUSABLE

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

CatalogNumber

B7S04**B7S06**B7S08**

B7S10**B7S12**

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .49 300 1,200 2.5 9 GD†-HY-KF 132 KA 2193/8 .62 300 1,200 3.0 11 GD†-HY-KF 132 KA 2191/2 .75 300 1,200 5.0 15 GD†-HY-KF 132 KA 219

5/8 .91 300 1,200 6.0 19 GD†-HY-KF 132 KA 2193/4 1.03 300 1,200 7.0 23 GD†-HY-KF 132 KA 219

Low Pressure HoseWorking Pressures to 500 PSI

Applications: Used for low pressure transmission of oil, gaso-line, air, water, coolants, etc. where operating pressures donot exceed 250 PSI. Should not be used on impulse applica-tions.

Temperature Range: -40˚ F to +200˚ F-40˚ F to +160˚ F (for gaseous applications)

Tube: Nitrile

Reinforcement: One textile braid

Cover: Impregnated textile braid, oil and mildew resistant

TC4Push-On Low Pressure PERMANENT REUSABLE

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

CatalogNumber

TC404TC405TC406

TC408TC410TC412

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .50 250 1,000 3.0 9 KF 222 KA 2195/16 .54 250 1,000 3.0 9 KF 222 KA 2193/8 .63 250 1,000 3.0 10 KF 222 KA 219

1/2 .75 250 1,000 5.0 14 KF 222 KA 2195/8 .91 250 1,000 6.0 19 KF 222 KA 2193/4 1.03 250 1,000 7.0 23 KF 222 KA 219

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

† Requires special tooling. Contact Dayco Eastman.

Page 7: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT 38

Low Pressure HoseWorking Pressures to 500 PSI

Applications: Used for low pressure transmission of oil, gaso-line, air and water.

Temperature Range: -40˚ F to +212˚ F

NOTE: -12 and -16 are similar to SAE 30R2,T2

Tube: Nitrile

Reinforcement: One textile braid**Two textile braids

Cover: Oil and weather resistant synthetic rubber–MSHA approved -03, -04, -05, -12 and -16 only

DL6SAE Fuel Line Hose PERMANENT REUSABLE

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

CatalogNumber

DL603DL604DL605

DL606DL608DL610

DL612**DL616**

Max. Min. Min.Working Burst Bend Per SAE

I.D. O.D. Pressure Pressure* Radius 100 Ft. SPEC(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/16 .36 500 2,000 2.5 5 KF 222 30R31/4 .42 400 1,600 2.7 6 KF 222 30R35/16 .52 300 1,200 3.0 8 KF 222 30R3

3/8 .60 300 1,200 4.0 11 KF 222 30R2,T11/2 .75 300 1,200 4.5 16 KF 222 30R2,T15/8 .88 300 1,200 5.0 19 KF 222 30R2,T1

3/4 1.22 300 1,200 6.0 46 KF 222 30R2,T21 1.52 300 1,200 8.0 66 HY 132 30R2,T2

Applications: Low pressure fuel and oil hose for use withgasoline and diesel fuel, lube oil and related vapors

Temperature Range: -40˚ F to +250˚ F

Tube: Nitrile

Reinforcement: One textile braid

Cover: Oil and weather resistant synthetic rubber

DL5SAE 30R7 Fuel Line PERMANENT REUSABLE

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

CatalogNumber

DL503DL504DL505

DL506DL508

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/16 .41 50 250 2.0 7 KF 2221/4 .50 50 250 2.5 9 GD†-KF 2225/16 .56 50 250 2.8 11 KF 222

3/8 .63 50 250 3.0 12 GD†-KF 2221/2 .78 35 175 4.0 17 GD†-KF 222

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

† Requires special tooling. Contact Dayco Eastman.

Page 8: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT

Medium Pressure HoseWorking Pressures to 3,000 PSI

39

D1SAE 100R3

Applications: Used in medium pressure hydraulic systems,pneumatic applications and many specialty services

Temperature Range: -40˚ F to +212˚ F

SAE/USCG Marine Listed

Tube: Neoprene

Reinforcement: Two textile braids

Cover: Neoprene–MSHA approved

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

D104D106D108

D112D116D120

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .58 1,250 5,000 3.0 13 GF†-GW-HY 132 BE 2313/8 .75 1,125 4,500 4.0 21 GF†-GW-HY 132 BE 2311/2 .94 1,000 4,000 5.0 30 GH-GW-HY09 132 BE-CA 231

3/4 1.25 750 3,000 6.0 47 GF-HY 132 BE-CA 2311 1.50 565 2,250 8.0 57 HY 132 BE-CA 231

1-1/4 1.75 375 1,500 10.0 73 HY 132 CA 244

Applications: For use with corrosive and/or high temperaturefluids

Temperature Range: -65˚ F to + 450˚ FFor steam, the maximum operating pressure is 200 PSI at 388˚ F

Not recommended for fuel applications–see T4

Tube: White extruded Teflon®; smooth boreMeets FDA requirements

Reinforcement and Cover: One braid of high tensile stainlesssteel wire

T1SAE 100R14A PERMANENT REUSABLE

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

CatalogNumber

T104T105T106

T108T110T112

T116

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/16 .30 1,500 10,000 2.0 8 GS-HT 2121/4 .37 1,500 9,000 3.0 10 GS-HT 2125/16 .43 1,500 8,000 4.0 11 GS-HT 212

13/32 .54 1,000 6,000 5.3 12 GS-HT 2121/2 .63 800 6,000 6.5 15 GS-HT 212

7/8 1.03 800 3,500 9.0 27 GS-HT 212

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

† Requires special tooling. Contact Dayco Eastman.

Page 9: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

Medium Pressure HoseWorking Pressures to 3,000 PSI

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT 40

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

GLSAE J1402

Type AI and DOT FMVSS-106

Applications: Used for high temperature truck and bus appli-cations, diesel fuel, gasoline, hot oil, air brakes andhydraulics.

Temperature Range: -40˚ F to +300˚ F

SAE/USCG Marine Listed

Tube: Chlorinated polyethylene

Reinforcement: Textile inner braid and a high tensile steel wirebraid

Cover: Oil and mildew resistant black textile braid

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

GL04GL05GL06

GL08GL10GL12

GL16GL20

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/16 .49 1,500 6,000 3.0 11 HF03 119 GL** 2481/4 .55 1,500 6,000 3.4 13 HY04 132 GL** 2485/16 .62 1,500 6,000 4.0 15 HY05 132 GL** 248

13/32 .74 1,250 5,000 4.6 19 HY07** 132 GL** 2481/2 .83 1,000 4,000 5.5 21 HY08** 132 GL** 2485/8 .96 750 3,000 6.5 26 HY10** 132 GL** 248

7/8 1.21 400 1,600 7.4 34 HY14 132 GL 2481-1/8 1.49 300 1,250 9.0 45 HY18 132 GL 248

Applications: For use with fuels and corrosive and/or hightemperature fluids where static electricity may be generated.

Temperature Range: -65˚ F to +450˚ FFor steam, the maximum operating pressure is 200 PSI at 388˚ F

Tube: Black conductive extruded Teflon®; smooth bore

Reinforcement and Cover: One braid of high tensile stainlesssteel wire

T4SAE 100R14B PERMANENT REUSABLE

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

CatalogNumber

T404T405T406

T408T410T412

T416

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/16 .30 1,500 10,000 2.0 8 GS-HT 2121/4 .37 1,500 9,000 3.0 10 GS-HT 2125/16 .43 1,500 8,000 4.0 11 GS-HT 212

13/32 .54 1,000 6,000 5.3 12 GS-HT 2121/2 .63 800 6,000 6.5 15 GS-HT 2125/8 .76 800 5,000 7.8 17 GS-HT 212

7/8 1.03 800 3,500 9.0 27 GS-HT 212

**Suitable for SAE J1402, Type AI and FMVSS-106 assemblies.

Page 10: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT

Medium Pressure HoseWorking Pressures to 3,000 PSI

41

Y9SAE 100R5, SAE J1402

Type AII and DOT FMVSS-106

Applications: Used for high temperature, medium pressurehydraulic applications on material handling equipment, off-the-road equipment, machine tools and other air, water, or oil service.

Temperature Range: -40˚ F to +212˚ F (Intermittent +300˚ F)(Continuous use at maximum temperature and maximumoperating pressure will affect service life)

SAE/USCG Marine Listed

Tube: Oil resistant synthetic rubber

Reinforcement: Textile inner braid and a high tensile steel wirebraid

Cover: Oil and mildew resistant black textile braid

†Suitable for SAE J1402, Type AII, and FMVSS-106 assemblies.

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

Y904Y905Y906

Y908Y910Y912

Y916Y920Y924

Y932

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/16 .52 3,000 12,000 3.0 14 HF03 119 BN† 2371/4 .58 3,000 12,000 3.4 18 HY04 132 BN† 2375/16 .68 2,250 9,000 4.0 23 HY05 132 BN† 237

13/32 .77 2,000 8,000 4.6 26 HY07† 132 BN† 2371/2 .92 1,750 7,000 5.5 36 HY09† 132 BN† 2375/8 1.08 1,500 6,000 6.5 44 HY10† 132 BN† 237

7/8 1.23 800 3,000 7.4 46 HY14 132 BN 2371-1/8 1.50 625 2,500 9.0 53 HY18 132 BQ 2411-3/8 1.75 500 2,000 10.5 62 HY22 132 BQ 241

1-13/16 2.22 350 1,400 13.3 84 HY29 132 BQ 241

Applications: For medium pressure applications that requirea nylon tube

Temperature Range: -40˚ F to +200˚ F

Tube: Nylon

Reinforcement: One braid of polyester fiber

Cover: Black abrasion resistant polyurethane (pin-pricked)

R5Hytron® Nylon Tube

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

R503R504

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/16 .37 2,000 8,000 .8 4 CY-SU 195 BU 2421/4 .46 1,875 7,500 1.3 6 CY-SU 195 BU 242

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

† Requires special tooling. Contact Dayco Eastman.

Page 11: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

Medium Pressure HoseWorking Pressures to 3,000 PSI

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT 42

D8SAE 100R1A

High Temperature

Applications: Used for medium pressure hydraulic lines onmobile equipment, machine tools and farm implements

Temperature Range: -40˚ F to +275˚ F

SAE/USCG Marine Listed (D803 through D816)

Tube: Oil resistant synthetic rubber

Reinforcement: One braid of high tensile steel wire

Cover: Oil resistant synthetic rubber–MSHA approved

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

D803D804D805

D806D808D810

D812D816D820

D824D832

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/16 .50 3,000 12,000 3.5 14 GB† 971/4 .63 2,750 11,000 4.0 21 GB† 97 CB 2475/16 .69 2,500 10,000 4.5 24 CH†† -

3/8 .78 2,250 9,000 5.0 31 BW-GB† 81 CB 2471/2 .91 2,000 8,000 7.0 38 BW-GB† 81 CB 2475/8 1.03 1,500 6,000 8.0 44 GB†-HF 97

3/4 1.19 1,250 5,000 9.5 55 BW-GB† 81 CB 2471 1.50 1,000 4,000 12.0 76 BW 81 CB 247

1-1/4 1.81 625 2,500 16.5 103 BW 81 CA 24481

1-1/2 2.06 500 2,000 20.0 121 BW 81 CA 2442 2.63 375 1,500 25.0 171 BW 81 CA 244

Applications: Used for medium pressure hydraulic lines onmobile equipment, machine tools and farm machinery.

Temperature Range: -40˚ F to +212˚ F

SAE/USCG Marine Listed

Tube: Oil resistant synthetic rubber

Reinforcement: One braid of high tensile steel wire

Cover: Oil and weather resistant synthetic rubber–MSHA approved

MSAE 100R1A

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

M03M04M06

M08M10M12

M16M20M24

M32

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/16 .49 3,000 12,000 3.5 14 GB† 971/4 .61 2,750 11,000 4.0 21 GW 1143/8 .77 2,250 9,000 5.0 31 BW-GW 114

1/2 .89 2,000 8,000 7.0 38 BW-GW 1145/8 1.02 1,500 6,000 8.0 44 BC† 793/4 1.17 1,250 5,000 9.5 55 BW 81

1 1.48 1,000 4,000 12.0 76 BW 811-1/4 1.80 625 2,500 16.5 103 BW 811-1/2 2.06 500 2,000 20.0 121 BC-BW 81

2 2.60 375 1,500 25.0 171 BC-BW 81

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

† Requires special tooling. Contact Dayco Eastman.†† Factory Assembly Only.

Page 12: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT

Medium Pressure HoseWorking Pressures to 3,000 PSI

43

Applications: Used for medium pressure hydraulic lines onmobile equipment, machine tools and farm machinery.

Temperature Range: -40˚ F to +212˚ F

SAE/USCG Marine Listed (except MX05 and MX10)

Tube: Oil resistant synthetic rubber

Reinforcement: One braid of high tensile steel wire

Cover: Oil and weather resistant synthetic rubber–MSHA approved

MXSAE 100R1AT

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

MX03MX04

MX05MX06

MX08

MX10MX12

MX16MX20MX24MX32

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page Series Page

# #

3/16 .47 3,000 12,000 3.5 13 GB†-HF 1191/4 .53 2,750 11,000 4.0 16 GB†-GW-HY 132 BA 227

5/16 .59 2,500 10,000 4.5 19 HY 1323/8 .69 2,250 9,000 5.0 25 BW-GB†-GW-HY 132 BA 227

1/2 .81 2,000 8,000 7.0 29 BW-GB†-GW-HY 132 BA 227

5/8 .94 1,500 6,000 8.0 36 HY 1323/4 1.09 1,250 5,000 9.5 44 BW-GB†-HY 132 BA 227

1 1.44 1,000 4,000 12.0 66 BW-HY 1321-1/4 1.72 625 2,500 16.5 88 BW 811-1/2 1.97 500 2,000 20.0 100 BW 81

2 2.50 375 1,500 25.0 144 BW 81

E7ASAE 100R1 Type AT

Applications: Used for medium pressure hydraulic lines onmobile equipment, machine tools and farm machinery.

Temperature Range: -40˚ F to +212˚ F

Tube: Polyester

Reinforcement: One braid of high tensile steel wire

Cover: Neoprene–MSHA approved

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

E704AE706AE708A

E712AE716A

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .54 2,750 11,000 4.0 15 GB†-HY 1323/8 .70 2,250 9,000 5.0 23 GB†-HY 1321/2 .84 2,000 8,000 7.0 29 GB†-HY 132

3/4 1.10 1,250 5,000 9.5 40 GB†-HY 1321 1.40 1,000 4,000 12.0 51 HY 132

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

† Requires special tooling. Contact Dayco Eastman.

Page 13: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

Medium Pressure HoseWorking Pressures to 3,000 PSI

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT 44

Applications: Used for medium pressure hydraulic service onagricultural equipment and machine tools

Temperature Range: -40˚ F to +200˚ F

For twin or multiple line configurations, refer to page 77

Tube: Polyester

Reinforcement: One braid of polyester fiber

Cover: Black abrasion resistant polyurethane (pin-pricked)

S7SAE 100R7

Hytron® Hose

†Requires special tooling. Contact Dayco Eastman.††SU series couplings may be swaged (with S-16 swager) or

crimped onto this hose series.

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

S702S703S704

S705S706S708

S712S716

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page Series Page

# #

1/8 .32 3,000 12,000 0.5 3 CY-GH† 923/16 .45 3,000 12,000 0.8 7 HF-SU†† 195 BG 2321/4 .50 2,750 11,000 1.3 7 CY-GH†-SU†† 195 BG 232

5/16 .58 2,500 10,000 1.8 10 CY-HY-SU†† 195 BG 2323/8 .65 2,250 9,000 2.0 11 CY-GH†-HY-SU†† 195 BG 2321/2 .82 2,000 8,000 3.0 17 GH†-HY-SU†† 195 BG 232

3/4 1.10 1,250 5,000 5.0 27 HY 1321 1.38 1,000 4,000 8.0 34 HY 132

E9SAE 100R1AT

High Temperature

Applications: Used for high temperature, medium pressurehydraulic lines on mobile equipment, machine tools and farmmachinery.

Temperature Range: -40˚ F to +275˚ F

Tube: Polyester

Reinforcement: One braid of high tensile steel wire

Cover: Neoprene–MSHA approved

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

E904E906E908

E912E916

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .54 2,750 11,000 4.0 15 HY 1323/8 .70 2,250 9,000 5.0 23 HY 1321/2 .84 2,000 8,000 7.0 29 HY 132

3/4 1.10 1,250 5,000 9.5 40 HY 1321 1.40 1,000 4,000 12.0 51 HY 132

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

Page 14: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT

Medium Pressure HoseWorking Pressures to 3,000 PSI

45

Applications: Used on medium pressure hydraulic applica-tions where a non-conductive hose is required

Temperature Range: -40˚ F to +200˚ F

For twin or multiple line configurations, refer to page 77

Tube: Natural polyester

Reinforcement: One braid of polyester fiber

Cover: Orange abrasion resistant polyurethane (non-pin-pricked)

S7ESAE 100R7

Non-Conductive Hytron® Hose

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

S7E02S7E03S7E04

S7E05S7E06S7E08

S7E12S7E16

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page Series Page

# #

1/8 .32 3,000 12,000 0.5 3 CY-GH† 923/16 .45 3,000 12,000 0.8 7 HF-SU†† 195 BG 2421/4 .50 2,750 11,000 1.3 7 CY-GH†-HY-SU†† 195 BG 242

5/16 .58 2,500 10,000 1.8 10 CY-HY-SU†† 195 BG 2423/8 .65 2,250 9,000 2.0 11 CY-GH†-HY 132 BG 2421/2 .82 2,000 8,000 3.0 17 GH†-HY-SU†† 192 BG 242

3/4 1.10 1,250 5,000 5.0 27 HY 1321 1.38 1,000 4,000 8.0 34 HY 132

Applications: Used on medium pressure hydraulic systemswhich require a nylon tube

Temperature Range: -40˚ F to +200˚ FFor twin or multiple line configurations, refer to page 77

Tube: Nylon

Reinforcement: One braid of polyester fiber

Cover: Black abrasion resistant polyurethane (pin-pricked)

NR7SAE 100R7 (Nylon Tube)

Hytron® Hose

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

NR702NR703NR704

NR705NR706NR708

NR712NR716

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page Series Page

# #

1/8 .32 3,000 12,000 0.5 3 CY 92 BU 2423/16 .45 3,000 12,000 0.8 7 HF-SU†† 195 BG 2321/4 .50 2,750 11,000 1.3 7 CY-GW-HY-SU†† 195 BG 232

5/16 .58 2,500 10,000 1.8 9 GW-HY-SU†† 195 BG 2323/8 .65 2,250 9,000 2.0 11 GW-HY-SU†† 195 BG 2321/2 .82 2,000 8,000 3.0 17 GH†-HY-SU†† 195 BG 232

3/4 1.11 1,250 5,000 5.0 27 HY 1321 1.38 1,000 4,000 8.0 34 HY 132

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

† Requires special tooling. Contact Dayco Eastman.†† Series couplings may be swaged (with S-16 swager)

or crimped onto this hose series.

Page 15: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

Medium Pressure HoseWorking Pressures to 3,000 PSI

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT 46

Applications: Used with medium pressure and low tempera-ture hydraulic applications, such as lift trucks in cold environ-ments.

Temperature Range: -70˚ F to +200˚ FFor twin or multiple line configurations refer to page 77

Tube: Polyester

Reinforcement: One braid of polyester fiber

Cover: Black abrasion resistant polyester (pin-pricked)

C2Low Temperature Hytron® Hose

Exceeds SAE 100R7

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

C204C205C206

C208C212

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page Series Page

# #

1/4 .52 2,750 11,000 1.3 8 CY-GH†-HY-SU 195 BG 2325/16 .58 2,500 10,000 1.8 10 CY-HY-SU 195 BG 2323/8 .65 2,250 9,000 2.0 11 CY-GH†-HY-SU 195 BG 232

1/2 .82 2,000 8,000 3.0 17 GH†-HY-SU 1953/4 1.10 1,250 5,000 5.0 24 HY 132

Applications: Used on medium pressure hydraulic systemswhich require a non-conductive hose and a nylon tube

Temperature Range: -40˚ F to +200˚ FFor twin or multiple line configurations, refer to page 77

Tube: Natural nylon

Reinforcement: One braid of polyester fiber

Cover: Orange abrasion resistant polyurethane (non-pin-pricked)

NR7ESAE 100R7 (Nylon Tube)

Non-Conductive Hytron® Hose

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

NR7E02NR7E03NR7E04

NR7E05NR7E06NR7E08

NR7E12NR7E16

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page Series Page

# #

1/8 .32 3,000 12,000 0.5 3 CY 92 BU 2423/16 .45 3,000 12,000 0.8 7 HF-SU†† 195 BG 2321/4 .50 2,750 11,000 1.3 7 CY-HY-SU†† 195 BG 232

5/16 .58 2,500 10,000 1.8 9 HY-SU†† 195 BG 2323/8 .65 2,250 9,000 2.0 11 HY-SU†† 195 BG 2321/2 .82 2,000 8,000 3.0 17 GH†-HY-SU†† 195 BG 232

3/4 1.11 1,250 5,000 5.0 27 HY 1321 1.38 1,000 4,000 8.0 34 HY 132

†† SU series couplings may be swaged (with S-16 swager) or crimped onto this hose series.

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

† Requires special tooling. Contact Dayco Eastman.

Page 16: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT

Medium Pressure HoseWorking Pressures to 3,000 PSI

47

ST Blue Lightning®

Exceeds SAE 100R1ATHigh Temperature

Applications: Used for petroleum based and fire resistant fluids. Fire resis-tant fluids may have limitations and should be discussed with DaycoEastman Applications Engineering DepartmentTemperature Range: -40˚ F to +300˚ F (Petroleum based fluids**)

-40˚ F to +250˚ F (Water/Oil emulsions)-40˚ F to +250˚ F (Water/Glycol solutions)-40˚ F to +180˚ F (Phosphate Ester fluids)

**Use fluid manufacturer’s recommendationsSAE/USCG Marine Listed

Tube: Chlorinated polyethylene

Reinforcement: One braid of high tensile steel wire

Cover: Oil, ozone and abrasion resistant blue synthetic rubber–MSHA approved.

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

ST04ST06ST08

ST12ST16

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .53 2,750 11,000 4.0 16 GW-HY 1323/8 .67 2,250 9,000 5.0 24 BW-GW-HY 1321/2 .80 2,000 8,000 7.0 29 BW-GW-HY 132

3/4 1.09 1,250 5,000 9.5 43 BW-HY 1321 1.41 1,000 4,000 12.0 66 BW-HY 132

AX E-Z Flex® 150Exceeds

SAE 100R1AT

Applications: Used for medium pressure hydraulic lines onmobile equipment, machine tools and farm machinery. Moreflexible, higher WP and higher temperature range than SAE 100R1

Temperature Range: -40˚ F to +250˚ F

SAE/USCG Marine Listed

Tube: Neoprene

Reinforcement: One braid of high tensile steel wire

Cover: Oil and weather resistant synthetic rubber–MSHA approved

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

AX04AX06AX08

AX10AX12AX16

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .50 3,000 12,000 1.5 14 GW-HY 1323/8 .62 3,000 12,000 2.0 18 GW-HY 1321/2 .75 2,500 10,000 3.0 22 GW-HY 132

5/8 .88 1,500 6,000 3.5 29 HY 1323/4 1.01 1,250 5,000 4.3 31 HY 1321 1.29 1,000 4,000 5.5 40 HY 132

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

† Requires special tooling. Contact Dayco Eastman.

Page 17: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

Medium Pressure HoseWorking Pressures to 3,000 PSI

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT 48

HR1C Farmex®

Exceeds SAE 100R1AT

Applications: Used for high temperature, medium pressurehydraulic applications on farm machinery

Temperature Range: -40˚ F to +250˚ F

SAE/USCG Marine Listed

Tube: Polyester

Reinforcement: One braid of high tensile steel wire

Cover: Neoprene–MSHA approved

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

HR1C04HR1C06HR1C08

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .50 3,000 12,000 2.0 12 GB†-HY 132 BA3/8 .66 2,500 10,000 2.5 19 GB†-HY 132 BA1/2 .77 2,500 10,000 3.5 25 GB†-HY 132 BA

HFS Firescreen®

Exceeds SAE 100R1AT

Applications: Used for high temperature, medium pressurehydraulic lines on mobile equipment, machine tools and farmmachinery.

Temperature Range: -40˚ F to +250˚ F

SAE/USCG Marine Listed

Tube: Polyester

Reinforcement: One braid of high tensile steel wire

Cover: Neoprene–MSHA approved

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

HFS04HFS05HFS06

HFS08HFS12HFS16

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .50 3,000 12,000 2.0 12 GB†-HY 132 BA5/16 .58 3,000 12,000 2.3 17 HY 1323/8 .66 2,500 10,000 2.5 19 GB†-HY 132 BA

1/2 .77 2,500 10,000 3.5 25 GB†-HY 132 BA3/4 1.05 1,500 6,000 5.0 37 HY 1321 1.35 1,250 5,000 10.0 53 HY 132

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

† Requires special tooling. Contact Dayco Eastman.

Page 18: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT

Medium Pressure HoseWorking Pressures to 3,000 PSI

49

AM E-Z Flex® PlusExceeds SAE 100R17

Applications: Used in timber processing and handling, agri-cultural, and construction industries requiring an extra toughrubber cover for abrasion resistant applications.

Temperature Range: -40˚ F to +250˚ F

SAE/USCG Marine Listed

Tube: Neoprene

Reinforcement: One braid of high tensile steel wire** Two braids of high tensile steel wire

Cover: Abrasion resistant Neoprene–MSHA approved

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

AM04AM06AM08

AM10**AM12**AM16**

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .50 3,000 12,000 1.5 14 GW-HY 1323/8 .63 3,000 12,000 2.0 19 GW-HY 1321/2 .78 3,000 12,000 3.5 27 GW-HY 132

5/8 .93 3,000 12,000 4.0 43 HY 1323/4 1.14 3,000 12,000 4.8 65 BW-HY 1321 1.48 3,000 12,000 6.0 108 BW 81

Applications: For use on medium pressure hydraulic applica-tions at low and high temperatures. Polyester cover providesexcellent abrasion resistance.

Temperature Range: -70˚ F to +250˚ F (H604 through H608)-50˚ F to +250˚ F (H610 and H612)

Tube: Polyester

Reinforcement: One braid of high tensile steel wire** Two braids of high tensile steel wire

Cover: Polyester

H63,000 PSI Working Pressure

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

H604H605H606

H608H610**H612**

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .48 3,000 12,000 2.0 12 GB-HY 1325/16 .55 3,000 12,000 2.3 14 HY 1323/8 .64 3,000 12,000 2.5 19 GB-HY 132

1/2 .77 3,000 12,000 3.5 29 GB-HY 1325/8 .99 3,000 12,000 4.0 47 HF 1193/4 1.16 3,000 12,000 4.8 69 HY 132

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

† Requires special tooling. Contact Dayco Eastman.

Page 19: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

Medium Pressure HoseWorking Pressures to 3,000 PSI

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT 50

R6 Abrasion King®

Meets SAE 100R17 Performance

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

R604R606R608

R610**R612**R616**

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .51 3,000 12,000 2.0 11 CY-GH†-HY 1323/8 .69 3,000 12,000 2.5 20 GH†-HY 1321/2 .82 3,000 12,000 3.5 27 GH†-HY 132

5/8 1.07 3,000 12,000 4.0 51 HY 1323/4 1.23 3,000 12,000 4.8 71 BW-HY 1321 1.53 3,000 12,000 6.0 100 BW 81

Applications: Designed to handle abrasive applications. Usedfor medium pressure hydraulic equipment

Temperature Range: -50˚ F to +250˚ F (R604 through R610)-50˚ F to +212˚ F (R612 and R616)

Tube: Polyester

Reinforcement: One braid of high tensile steel wire** Two braids of high tensile steel wire

Cover: Black abrasion resistant nylon yarn with one blue plait foridentification

D6Exceeds SAE 100R17

Applications: Used in medium pressure hydraulic applica-tions where 3,000 PSI working pressure is required

Temperature Range: -40˚ F to +250˚ F

Tube: Polyester

Reinforcement: One braid of high tensile steel wire** Two braids of high tensile steel wire

Cover: Neoprene–MSHA approved

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

D604D605D606

D608D610**D612**

D616**

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .50 3,000 12,000 2.0 12 GB†-HY 1325/16 .58 3,000 12,000 2.3 17 HY 1323/8 .66 3,000 12,000 2.5 23 GB†-HY 132

1/2 .80 3,000 12,000 3.5 29 GB†-HY 1325/8 1.00 3,000 12,000 4.0 47 HF-HY 1323/4 1.18 3,000 12,000 4.8 73 HY 132

1 1.48 3,000 12,000 6.0 101 HY 132

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

† Requires special tooling. Contact Dayco Eastman.

Page 20: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

BASAE 100R2A

BXX E-Z Flex®

SAE 100R2AT

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT

High Pressure HoseWorking Pressures to 5,000 PSI

Applications: Used for high pressure hydraulic lines on off-the-road construction equipment, and machine tools, farm andmarine equipment

Temperature Range: -40˚ F to +212˚ F

SAE/USCG Marine Listed

Tube: Neoprene

Reinforcement: Two high tensile steel wire braids

Cover: Oil and weather resistant synthetic rubber–MSHA approved

Applications: Used for high pressure hydraulic lines on off-the-road construction equipment, machine tools, farm andmarine equipmentBend radius is 1/2 of the SAE requirement (through -16 size only)

Temperature Range: -40˚ F to +212˚ FSAE/USCG Marine Listed

Tube: Neoprene

Reinforcement: Two high tensile steel wire braids

Cover: Oil and weather resistant synthetic rubber–MSHA approved

51

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

BA04BA06BA08

BA10BA12BA16

BA20BA24BA32

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .67 5,000 20,000 4.0 33 GW 1143/8 .83 4,000 16,000 5.0 45 BW-GW 1141/2 .95 3,500 14,000 7.0 54 BW-GW 114

5/8 1.08 2,750 11,000 8.0 64 BC† 793/4 1.24 2,250 9,000 9.5 75 BW 811 1.54 2,000 8,000 12.0 106 BW 81

1-1/4 1.99 1,625 6,500 16.5 166 BC-BW 791-1/2 2.21 1,250 5,000 20.0 189 BC-BW 79

2 2.71 1,125 4,500 25.0 247 BC-BW 79

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

BXX04BXX06BXX08

BXX10BXX12BXX16

BXX20BXX24BXX32

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .59 5,000 20,000 2.0 27 GW-HY 132 BM 2333/8 .74 4,000 16,000 2.5 38 BW-GW-HY 132 BM 2331/2 .87 3,500 14,000 3.5 46 BW-GW HY 132 BM 233

5/8 1.00 2,750 11,000 4.0 55 HF-HY 1323/4 1.15 2,250 9,000 4.8 65 BW-HY 132 BM 2331 1.49 2,000 8,000 6.0 98 BW-HY 132 BM 233

1-1/4 1.88 1,625 6,500 16.5 142 BW-HY 1321-1/2 2.13 1,250 5,000 20.5 168 BC-BW 79

2 2.63 1,125 4,500 25.0 224 BC-BW 79

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

† Requires special tooling. Contact Dayco Eastman.

Page 21: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

High Pressure HoseWorking Pressures to 5,000 PSI

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT 52

Applications: Used for high pressure hydraulic lines on off-the-road construction, farm, and mining equipment operatingin an abrasive and restricted environment

Temperature Range: -40˚ F to +212˚ F

Tube: Neoprene

Reinforcement: Two braids of high tensile steel wire

Cover: Abrasion, oil and weather resistant ultra high molecularweight polyethylene–MSHA approved

Applications: Used for high pressure hydraulic lines on off-the-road construction, farm, and mining equipment operatingin an abrasive and restricted environment

Bend radius is 1/2 of the SAE requirement (through size -16 only)

Temperature Range: -40˚ F to +212˚ F

Tube: Neoprene

Reinforcement: Two braids of high tensile wire

Cover: Abrasion, oil and water resistant Neoprene – MSHAapproved

RT2 E-Z Flex®

SAE 100R2ATVery High Abrasion Resistance

BXP IroncladTM

SAE 100R2ATExceptional High Abrasion Resistance

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

BXP04BXP06BXP08

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .59 5,000 20,000 4.0 27 BW-GW 1143/8 .74 4,000 16,000 5.0 36 BW-GW 1141/2 .87 3,500 14,000 7.0 46 BW-GW 114

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

RT204RT206RT208

RT210RT212RT216

RT220RT224RT232

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .59 5,000 20,000 2.0 27 BW-GW-HY 1323/8 .74 4,000 16,000 2.5 38 BW-GW-HY 1321/2 .87 3,500 14,000 3.5 46 BW-GW-HY 132

5/8 1.00 2,750 11,000 4.0 55 HY 1323/4 1.15 2,250 9,000 4.8 65 BW-HY 1321 1.49 2,000 8,000 6.0 98 BW-HY 132

1 1/4 1.88 1,625 6,500 16.5 142 BW-HY 1321 1/2 2.13 1,250 5,000 20.5 168 BC-BW 79

2 2.63 1,125 4,500 25.0 224 BC-BW 79

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

Page 22: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT

High Pressure HoseWorking Pressures to 6,600 PSI

53

Applications: Used for high pressure hydraulic lines on off-the-road construction equipment, machine tools, farm andmarine equipment

Temperature Range: -40 ̊F to +212 ̊FSAE/USCG Marine Listed

Tube: Nitrile

Reinforcement: Two braid of high tensile steel wire

Cover: Oil and weather resistant synthetic rubber–MSHA approved

J4SAE 100R2AT

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

J420J424J432

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1-1/4 1.88 1,625 6,600 16.5 129 BW-HY-JJ 811-1/2 2.16 1,250 5,000 20.0 150 BW-JJ 81

2 2.66 1,125 4,500 25.0 187 BC-BW-JJ 81

Applications: Used for high pressure hydraulic lines on off-the-road construction equipment, machine tools, farm andmarine equipment.

Temperature Range: -40 ̊F to +212 ̊F

Tube: Polyester

Reinforcement: Two braids of high tensile steel wire

Cover: Neoprene–MSHA approved

J4ASAE 100R2AT

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

J404AJ406AJ408A

J412AJ416A

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .59 5,000 20,000 2.0 28 HY 1323/8 .75 4,000 16,000 2.5 39 BW-HY 1321/2 .88 3,500 14,000 3.5 45 BW-HY 132

3/4 1.15 2,250 9,000 4.8 62 BW-HY 1321 1.50 2,000 8,000 6.0 87 BW-HY 132

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

Page 23: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

High Pressure HoseWorking Pressures to 5,000 PSI

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT 54

Applications: Used for high pressure hydraulic lines on off-the-road construction equipment, machine tools, farm andmarine equipment

Temperature Range: -40 ̊F to +250 ̊F (Petroleum base applications)-40 ̊F to +180 ̊F (Water/Glycol applications)

Tube: Neoprene

Reinforcement: Two braids of high tensile steel wire

Cover: Oil and weather resistant synthetic rubber–MSHA approved

J9SAE 100R2AT

High Temperature

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

J904J906J908

J912J916

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .59 5,000 20,000 4.0 27 HY 1323/8 .74 4,000 16,000 5.0 38 BW-HY 1321/2 .87 3,500 14,000 7.0 46 BW-HY 132

3/4 1.15 2,250 9,000 9.5 65 BW-HY 1321 1.49 2,000 8,000 12.0 98 BW-HY 132

Applications: Used on high pressure hydraulic applications

Temperature Range: -40˚ F to +200˚ F

For twin or multiple line configurations, refer to page 77

Tube: Polyester

Reinforcement: One braid of aramid fiber

Cover: Black abrasion resistant polyurethane (pin-pricked)

S8SAE 100R8

Hytron® Hose

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

S803S804S806

S808S812S816

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/16 .44 5,000 20,000 1.5 7 SU†† 1951/4 .51 5,000 20,000 2.0 8 HY-SU†† 1953/8 .64 4,000 16,000 2.5 11 HY-SU†† 195

1/2 .80 3,500 14,000 4.0 16 HY-SU†† 1953/4 1.10 2,250 9,000 6.5 25 CY-HY 1321 1.41 2,000 8,000 9.0 38 CY-HY 132

†† SU series couplings may be swaged (with S-16 swager) orcrimped onto this hose series.

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

Page 24: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT

High Pressure HoseWorking Pressures to 5,000 PSI

55

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

†† SU series couplings may be swaged (with S-16swager) or crimped onto this hose series.

Applications: Used on high pressure hydraulic applicationsrequiring a non-conductive hose

Temperature Range: -40˚ F to +200˚ F

For twin or multiple line configurations, refer to page 77

Tube: Natural polyester

Reinforcement: One braid of aramid fiber

Cover: Orange abrasion resistant polyurethane (non-pin-pricked)

S8ESAE 100R8

Non-Conductive Hytron® Hose

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

S8E03S8E04S8E06

S8E08S8E12S8E16

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/16 .44 5,000 20,000 1.5 7 SU†† 1951/4 .51 5,000 20,000 2.0 8 HY-SU†† 1953/8 .64 4,000 16,000 2.5 11 HY-SU†† 195

1/2 .80 3,500 14,000 4.0 16 HY-SU†† 1953/4 1.10 2,250 9,000 6.5 25 CY-HY 1321 1.41 2,000 8,000 9.0 38 CY-HY 132

Applications: Used as a replacement for SAE 100R2 highpressure hydraulic lines on off-the-road construction equip-ment, machine tools and mining equipment

Temperature Range: -40˚ F to +250˚ F

SAE/USCG Marine Listed

Tube: Neoprene

Reinforcement: Two high tensile steel wire braids

Cover: Oil and weather resistant synthetic rubber–MSHAapproved

FX E-Z Flex® 250SAE 100R16

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

FX04FX06FX08

FX10FX12FX16

FX20

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .55 5,000 20,000 2.0 23 GW-HY 1323/8 .67 4,000 16,000 2.5 28 BW-GW-HY 1321/2 .81 3,500 14,000 3.5 36 BW-GW-HY 132

5/8 .93 2,750 11,000 4.0 42 HF-HY 1323/4 1.07 2,250 9,000 4.8 51 BW-HY 1321 1.37 2,000 8,000 6.0 72 BW-HY 132

1-1/4 1.69 1,625 6,500 8.3 102 BC-BW-HY 132

Page 25: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

High Pressure HoseWorking Pressures to 5,000 PSI

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT 56

Applications: Used as a replacement for SAE 100R2 highpressure hydraulic lines on off-the-road construction equip-ment, machine tools and mining equipment

Temperature Range: -40˚ F to +212˚ F

SAE/USCG Marine Listed

Tube: Polyester

Reinforcement: One braid of high tensile steel wire**Two braids of high tensile steel wire

Cover: Neoprene–MSHA approved

HFS2 Firescreen II®

SAE 100R16

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

HFS204**HFS206HFS208

HFS210HFS212HFS216**

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .56 5,000 20,000 2.0 21 HY 132 BA 2273/8 .66 4,000 16,000 2.5 23 GB†-HY 132 BA 2271/2 .80 3,500 14,000 3.5 29 GB†-HY 132 BA 227

5/8 .95 2,750 11,000 4.0 38 GB†-HF-HY 1323/4 1.08 2,250 9,000 4.8 45 GB†-HY 132 BA 2271 1.43 2,000 8,000 6.0 80 HY 132 BA 227

Applications: Used as a replacement for SAE 100R2 highpressure hydraulic lines on agriculture equipment

Temperature Range: -40˚ F to +212˚ F

Tube: Polyester

Reinforcement: One braid of high tensile steel wire**Two braids of high tensile steel wire

Cover: Neoprene–MSHA approved

HR2C – Farmex II®

SAE 100R16

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

HR2C04**HR2C06HR2C08

HR2C10HR2C12HR2C16**

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .56 5,000 20,000 2.0 21 HY 132 BA 2273/8 .66 4,000 16,000 2.5 23 GB†-HY 132 BA 2271/2 .80 3,500 14,000 3.5 29 GB†-HY 132 BA 227

5/8 .95 2,750 11,000 4.0 38 GB†-HF-HY 1323/4 1.08 2,250 9,000 4.8 45 GB†-HY 132 BA 2271 1.43 2,000 8,000 6.0 80 HY 132 BA 227

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

† Requires special tooling. Contact Dayco Eastman.

Page 26: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT

High Pressure HoseWorking Pressures to 10,000 PSI

57

Applications: Used for petroleum based and fire resistant fluids. Fire resis-tant fluids may have limitations and should be discussed with DaycoEastman Applications Engineering DepartmentTemperature Range: -40˚ F to +300˚ F (Petroleum based fluids)

-40˚ F to +250˚ F (Water/Oil emulsions)-40˚ F to +250˚ F (Water/Glycol solutions)-40˚ F to +180˚ F (Phosphate Ester fluids)

SAE/USCG Marine Listed

Tube: Chlorinated polyethylene

Reinforcement: Two high tensile steel wire braids

Cover: Oil, ozone and abrasion resistant blue syntheticrubber–MSHA approved

DT Blue Lightning®

Exceeds SAE 100R2High Temperature

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

DT06DT08DT12DT16

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/8 .74 4,000 16,000 5.0 35 BW-GW 811/2 .87 3,500 14,000 7.0 45 BW 813/4 1.15 2,250 9,000 9.5 65 BW 811 1.48 2,000 8,000 12.0 96 BW 81

Applications: Used for high pressure hydraulic lines on off-the-road construction, farm and mining equipment operating inan abrasive and restricted environment.

Temperature Range: -40 ̊to 212 ̊F

Tube: Neoprene

Reinforcement: Two braids of high tensile wire

Cover: Abrasion, oil and water resistant Neoprene – MSHA approved

SN2KAbrasion King®

DIN 20022-2SN

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

SN2K04SN2K06SN2K08

SN2K10SN2K12SN2K16

SN2K20SN2K24SN2K32

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .59 5,800 23,200 4.0 27 BW 813/8 .74 4,800 19,200 5.0 38 BW 811/2 .87 4,000 16,000 7.0 46 BW 81

5/8 1.00 3,625 14,500 8.0 55 HY 1323/4 1.15 3,200 12,800 9.6 65 BW 811 1.49 2,400 9,600 12.0 98 BW 81

1 1/4 1.88 1,800 7,200 16.5 142 BW 811 1/2 2.13 1,300 5,200 20.5 168 BC-BW 79

2 2.63 1,160 4,640 25.0 224 BC-BW 79

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

DINNumber

DN06DN10DN12

DN16DN20DN25

DN32DN40DN50

Page 27: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

F2 BlueExceeds SAE 100R2AT and

DIN 20022-2SN High Temperature

High Pressure HoseWorking Pressures to 10,000 PSI

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT 58

Applications: Used for petroleum based and fire resistant flu-ids. Fire resistant fluids may have limitations and should bediscussed with Dayco Eastman Applications EngineeringDepartment

Temperature Range: -65˚ F to +300˚ F (Petroleum based fluids)-65˚ F to +250˚ F (Water/Oil emulsions)-65˚ F to +250˚ F (Water/Glycol solutions)-65˚ F to +180˚ F (Phosphate Ester fluids)

Tube: Hypalon®

Reinforcement: Two braids of high tensile steel wire

Cover: Hypalon®–MSHA approved

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

F206F208F210

F212F216F220

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/8 .75 5,000 20,000 5.0 36 BW-HY 1321/2 .87 4,250 17,000 7.0 42 BW-HY 1325/8 .99 3,600 14,400 8.0 50 HY 132

3/4 1.18 3,000 12,000 9.5 63 BW-HY 1321 1.46 2,500 10,000 12.0 84 BW-HY 132

1-1/4 1.85 2,250 9,000 16.5 140 BW-HY 132

Applications: Used for high pressure hydraulic service

Temperature Range: -40˚ F to +212˚ F

SAE/USCG Marine Listed

Tube: Polyester

Reinforcement: Two braids of high tensile steel wire

Cover: Neoprene–MSHA approved

HTB Eliminator®

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

HTB04HTB06HTB08

HTB10HTB12HTB16

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .60 7,000 28,000 4.0 27 HY 1323/8 .74 5,500 22,000 6.0 37 BW-HY-JJ 1321/2 .88 5,000 20,000 7.0 46 BW-HY-JJ 132

5/8 1.01 4,000 16,000 8.0 52 HF-HY-JJ 1323/4 1.18 4,000 16,000 9.5 73 BW-HY-JJ 1321 1.48 3,500 14,000 12.0 101 BW-HY-JJ 132

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

† Requires special tooling. Contact Dayco Eastman.

Page 28: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

GENERAL

INFORMATION

BRAIDED

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT

High Pressure HoseWorking Pressures to 10,000 PSI

59

Applications: For ultra high pressure hydraulic applications.

Temperature Range: -40˚ F to +200˚ F

WARNING: All HRK assemblies must have a BOG (guard)attached to both ends (Refer to page 258).FACTORY MADE ASSEMBLIES ONLY

Tube: Nylon

Reinforcement: Multiple layers of aramid fiber

Cover: Black abrasion resistant polyurethane (pin-pricked)

HRKHytron® Ultra High Pressure Hose

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

HRK03HRK04HRK06

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/16 .51 10,000 40,000 3.5 9 CW† 911/4 .62 10,000 40,000 4.0 11 CW† 913/8 .78 7,500 30,000 6.0 16 CW† 91

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

† Requires special tooling. Contact Dayco Eastman.

Page 29: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

GENERAL

INFORMATION

BRAIDED

HOSE

SPIRAL

HOSE

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT 60

Spiral Wire Reinforced HoseWorking Pressures to 7,000 PSI

Applications: Used for high pressure hydraulic service.Provides longer life in flex impulse applications than braidedhose.

Temperature Range: -40˚ F to +212˚ F

SAE/USCG Marine Listed

Tube: Neoprene

Reinforcement: Four spiraled layers of high tensile steel wire

Cover: Oil and weather resistant synthetic rubber–MSHA approved

QXSAE 100R9AT

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

QX06QX08QX12

QX16QX20QX24

QX32

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/8 .78 4,500 18,000 5.0 45 BW 811/2 .89 4,000 16,000 7.0 50 BW 813/4 1.19 3,000 12,000 9.5 80 BW 81

1 1.50 3,000 12,000 12.0 117 BW 811-1/4 1.86 2,500 10,000 16.5 189 BW 811-1/2 2.11 2,000 8,000 20.0 212 BW 81

2 2.66 2,000 8,000 26.0 308 BW 81

Applications: Used for high pressure hydraulic service.Provides longer life in flex-impulse applications than braidedhose.

Temperature Range: -40˚ F to +212˚ F

SAE/USCG Marine Listed

Tube: Neoprene

Reinforcement: Four spiraled layers of high tensile steel wire

Cover: Oil and weather resistant synthetic rubber–MSHA approved

L1SAE 100R9AT

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

L106L108L112

L116L120

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/8 .80 4,500 18,000 5.0 47 BW-HY 1321/2 .89 4.000 16,000 7.0 56 BW-HY 1323/4 1.18 3,000 12,000 9.5 87 BW-HY-JJ 132

1 1.50 3,000 12,000 12.0 124 BW-HY-JJ 1321-1/4 1.82 2,500 10,000 16.5 200 BW 81

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

Page 30: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

GENERAL

INFORMATION

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT61

Spiral Wire Reinforced HoseWorking Pressures to 7,000 PSI

Applications: Used for high pressure hydraulic service.Provides longer life under the higher temperatures and pres-sures of modern hydraulically operated equipmentBend radius is 1/2 of SAE requirements for sizes -12, -16, and -20Temperature Range: -40˚ F to +250˚ F

SAE/USCG Marine Listed

Tube: Neoprene

Reinforcement: Four spiraled layers of high tensile steel wire

Cover: Oil and weather resistant synthetic rubber – gray color –MSHA approved

CEE-Z Flex® Spiral

SAE 100R12

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

CET06CET08CE12

CE16CE20CE24

CE32

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/8 .78 4,000 16,000 5.0 45 BW-JJ 811/2 .89 4,000 16,000 7.0 50 BW-JJ 813/4 1.21 4,000 16,000 4.8 89 BW-JJ 81

1 1.50 4,000 16,000 6.0 136 BW-JJ 811-1/4 1.85 3,000 12,000 8.3 182 BW-JJ 811-1/2 2.11 2,500 10,000 20.0 207 BW-JJ 81

2 2.63 2,500 10,000 25.0 296 BW-JJ 81

Applications: Used for high pressure hydraulic service.Provides longer life under the higher temperatures and pres-sures of modern hydraulically operated equipment

Temperature Range: -40˚ F to +250˚ F

SAE/USCG Marine Listed

Tube: Neoprene

Reinforcement: Four spiraled layers of high tensile steel wire

Cover: Oil and weather resistant synthetic rubber–graycolor–MSHA approved

M7SAE 100R12

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

M706M708M710

M712M716M720

M724M732

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/8 .79 4,000 16,000 5.0 42 BW-JJ 811/2 .94 4,000 16,000 7.0 54 BW-JJ 815/8 1.07 4,000 16,000 8.0 71 BW-JJ 81

3/4 1.21 4,000 16,000 9.5 82 BW-JJ 811 1.50 4,000 16,000 12.0 138 BW-JJ 81

1-1/4 1.85 3,000 12,000 16.5 189 BW-JJ 81

1-1/2 2.11 2,500 10,000 20.0 223 BW-JJ 812 2.63 2,500 10,000 25.0 311 BW-HW-JJ 81

BRAIDED

HOSE

SPIRAL

HOSE

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

Page 31: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

Spiral Wire Reinforced HoseWorking Pressures to 7,000 PSI

GENERAL

INFORMATION

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT 62

Applications: Used for high pressure hydraulic service.

Provides 100R12 performance at half of the minimum bendradius.

Temperature Range: -40˚ F to +250˚ F

Tube: Polyester

Reinforcement: Two braids of high tensile steel wire

Cover: Neoprene – MSHA approved

M8 E-Z Flex®

SAE 100R12 PerformanceAlternate Two Wire Braid

Reinforcement

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

M806M808M810M812

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/8 .74 4,000 16,000 2.5 37 BW-HY-JJ 811/2 .88 4,000 16,000 3.5 46 BW-HY-JJ 815/8 1.05 4,000 16,000 4.0 63 JJ 1683/4 1.18 4,000 16,000 4.8 77 BW-JJ 81

Applications: Used for high pressure hydraulic service.Provides longer life under the higher temperatures and pres-sures of modern hydraulically operated equipment

Temperature Range: -40˚ F to +250˚ F

Tube: Neoprene

Reinforcement: Four spiraled layers of high tensile steel wire

Cover: Oil and weather resistant – gray color – MSHA approved

CZSAE 100R12

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

CZ06CZ08CZ10

CZ12CZ16CZ20

CZ24CZ32

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/8 .80 4,000 16,000 5.0 45 BW 811/2 .94 4,000 16,000 7.0 58 BW 815/8 1.07 4,000 16,000 8.0 71 JJ 168

3/4 1.21 4,000 16,000 9.5 87 BW 811 1.50 4,000 16,000 12.0 140 BW 81

1-1/4 1.85 3,000 12,000 16.5 184 BW 81

1-1/2 2.11 2,500 10,000 20.0 210 JJ 1682 2.63 2,500 10,000 25.0 281 HW 127

BRAIDED

HOSE

SPIRAL

HOSE

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

Page 32: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

GENERAL

INFORMATION

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT

Spiral Wire Reinforced HoseWorking Pressures to 7,000 PSI

63

Applications: Used in severe high pressure hydraulic applications

Temperature Range: -40˚ F to +250˚ F

SAE/USCG Marine Listed

Tube: Neoprene

Reinforcement: Four spiraled layers of high tensile steel wire

Cover: Oil and weather resistant synthetic rubber–MSHA approved

CNExceeds 100R11

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

CN20CN24CN32

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1-1/4 1.78 4,000 16,000 18.0 164 BW-JJ 811-1/2 2.10 3,000 12,000 22.0 224 BW-JJ 81

2 2.69 3,000 12,000 28.0 323 BW-JJ 81

Applications: A superior spiral hose for use in severe highpressure hydraulic applications

Temperature Range: -40˚F to +212˚F

SAE/USCG Marine Listed

Tube: Neoprene

Reinforcement: Four spiraled layers of high tensile steel wire

Cover: Oil and weather resistant synthetic rubber – MSHAapproved

N3DIN 20023†

† Sizes -6, -8, and -10 meet DIN 20023 4SP.Sizes -12, -16, -20, -24 and -32 meet DIN 20023 4SH

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

N306N308N310

N312N316N320

N324N332

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/8 .78 6,400 25,600 7.0 48 JJ 1681/2 .91 6,000 24,000 9.0 56 JJ 1685/8 1.12 6,000 24,000 9.5 77 JJ 168

3/4 1.26 6,000 24,000 9.5 105 JJ 1681 1.50 5,500 22,000 12.0 140 JJ 168

1-1/4 1.78 5,000 20,000 16.0 169 JJ 168

1-1/2 2.11 4,200 16,800 18.0 230 JJ 1682 2.68 3,600 14,400 27.5 318 JJ 168

BRAIDED

HOSE

SPIRAL

HOSE

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

Page 33: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

Spiral Wire Reinforced HoseWorking Pressures to 7,000 PSI

GENERAL

INFORMATION

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT 64

*Burst pressure is for reference and design purposes only and is noindication that the product should be used above the indicated relatedworking pressure.

Applications: A superior spiral hose for use in severe highpressure hydraulic applications

Temperature Range: -40˚ F to +250˚ F

SAE/USCG Marine ListedDNV Approved

Tube: Seamless Neoprene, oil resistant synthetic rubber

Reinforcement: Four spiraled layers of high tensile steel wire**Six spiraled layers of high tensile steel wire

Cover: Oil and weather resistant synthetic rubber – red color –MSHA approved

NHSAE 100R13

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

NH12NH16NH20**

NH24**NH32**

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/4 1.26 5,000 20,000 9.5 112 BW-JJ 811 1.52 5,000 20,000 12.0 156 BW-JJ 81

1-1/4 1.96 5,000 20,000 16.0 256 NB-JJ 190

1-1/2 2.26 5,000 20,000 20.0 339 NB 1902 2.80 5,000 20,000 25.0 485 NB 190

Applications: Used in severe high pressure hydraulic applications

Temperature Range: -40˚F to +250˚F

SAE/USCG Marine Listed

Tube: Neoprene

Reinforcement: Four spiraled layers of high tensile steel wire**Six spiraled layers of high tensile steel wire

Cover: Red, oil and weather resistant synthetic rubber–MSHAapproved

N6SAE 100R13

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

N612N616N620**

N624**N632**

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/4 1.26 5,000 20,000 9.5 114 BW-JJ 1681 1.54 5,000 20,000 12.0 153 BW-JJ 168

1-1/4 1.96 5,000 20,000 16.5 250 JJ-NB 168

1-1/2 2.26 5,000 20,000 20.0 333 JJ-NB 1682 2.80 5,000 20,000 25.0 495 JJ 168

BRAIDED

HOSE

SPIRAL

HOSE

Page 34: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPECIALTY

HOSE

BRAIDED

HOSE

GENERAL

INFORMATION

COUPLINGS

MISC

EQUIPMENT

Spiral Wire Reinforced HoseWorking Pressures to 6,000 PSI

65

Applications: A compact, lighter hose for use in severe highpressure hydraulic applications including hydrostatic drives.

Temperature Range: -40˚ F to +250˚ F

Tube: Neoprene

Reinforcement: Four Spiraled layers of high tensile steel wire

Cover: Oil and weather resistant synthetic rubber–MSHA approved

HT6

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

HT612HT616

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/4 1.33 6,000 24,000 9.5 120 BW-JJ 1681 1.59 6,000 24,000 12.0 162 JJ-KW 168

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

Applications: A compact, lighter hose for use in severe highpressure hydraulic applications including hydrostatic drives.

Temperature Range: -40˚ F to +250˚ F

Tube: Neoprene

Reinforcement: Four spiraled layers of high tensile steel wire** Six spiraled layers of high tensile steel wire

Cover: Oil and weather resistant synthetic rubber–MSHA approved

N2SAE 100R15

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

N212N216N220N224**

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/4 1.23 6,000 24,000 10.5 100 JJ 1681 1.50 6,000 24,000 10.5 142 JJ 168

1 1/4 1.90 6,000 24,000 10.5 242 JJ 1681-1/2 2.25 6,000 24,000 12.5 343 JJ 168

SPIRAL

HOSE

Page 35: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPECIALTY

HOSE

Spiral Wire Reinforced HoseWorking Pressures to 7,000 PSI

GENERAL

INFORMATION

BRAIDED

HOSE

COUPLINGS

MISC

EQUIPMENT 66

H7Extra High Pressure

Applications: A compact, lighter hose for use in servere highpressure hydraulic applications.

Temperature Range: -40˚ F to +250˚ F

Tube: Neoprene

Reinforcement: Four spiraled layers of high tensile steel wire

Cover: Oil and weather resistant synthetic rubber–MSHA approved

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

H704H706H708

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .79 7,000 28,000 4.0 55 KC 1843/8 .81 7,000 28,000 6.0 59 JJ 1681/2 1.00 7,000 28,000 8.0 82 JJ 168

SPIRAL

HOSE

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

Page 36: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

BRAIDED

HOSE

GENERAL

INFORMATION

SPECIALTY

HOSE

COUPLINGS

MISC

EQUIPMENT

Specialty Hose

67

BHBarrier Refrigerant Hose

Exceeds SAE J51Meets SAE J2064

Applications: Specifically designed for use in R12 andR134A refrigerant systems only.

Temperature Range: -22˚ F to +257˚ F

Tube: Neoprene/nylon barrier/nitrile barrier construction

Reinforcement: Textile reinforcement

Cover: Black, abrasion, ozone and heat resistant EPDM

† Requires special tooling. Contact Dayco Eastman.

PERMANENT REUSABLE

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

CatalogNumber

BH06BH08BH10

BH12

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

5/16 .75 350 2,000 4.0 19 BL† 20313/32 .91 350 2,000 4.7 27 BL† 2031/2 1.00 350 2,000 5.5 32 BL† 203

5/8 1.13 350 1,750 6.5 37 BL† 203

†† Bulk hose sales only, no coupling.

Applications: Specifically designed for use in R12 andR134A refrigerant systems only.

Temperature Range: -22˚ F to +203˚ F

Tube: Neoprene/nylon barrier/nitrile barrier construction

Reinforcement: One textile braid

Cover: Abrasion, ozone and heat resistant EPDMColors: Black - BK Red - RD

Blue - BL Yellow - YL

BCHBarrier Charging Hose

Meets SAE J2196PERMANENT REUSABLE

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

CatalogNumber

BCH03

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

7/32 .48 800 4,000 4.0 9 ††

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

Page 37: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPECIALTY

HOSE

SPIRAL

HOSE

GENERAL

INFORMATION

COUPLINGS

MISC

EQUIPMENT 68

Specialty Hose

Applications: For use with truck air and air brake systems,except for the compressor discharge line and other tempera-ture limiting locations

Temperature Range: -40˚ F to +200˚ F

Meets DOT FMVSS 106 requirements except for C602

Tube: NylonReinforcement: Type A, non-reinforced (-02 thru -05 sizes)

Type B, polyester fiber reinforced (-06 thru -12 sizes)Cover: Black nylon

Also available in blue, red, green, brown, yellow and orangeAvailability of colors depends on size.

C6Hytron® Air Brake Tubing

SAE J844

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

C602C604C605

C606C608C610

C612

Max. Min. Min.Wall Working Burst Bend Per

Thickness O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

.023 .13 150 1,000 .37 .3 †

.040 .25 150 1,200 1.00 1.2 †

.040 .31 150 1,000 1.25 1.5 †

.062 .38 150 1,400 1.50 2.8 †

.062 .50 150 950 2.00 4.3 †

.092 .63 150 900 2.50 6.8 †

.092 .75 150 800 3.00 8.5 †

Applications: Used for air brake hose lines. Not to be usedfrom air compressor to air resevoir if temperature exceeds+250˚F

Temperature Range: -40˚F to +250˚F

Tube: EPDM

Reinforcement: Four spiraled textile layersCover: EPDM

Y1SAE J1402, Table A

DOT FMVSS 106

**Y1 assemblies built with GR couplings assembled outside of DaycoEastman factories must be identified by the assembler per DOTFMVSS 571.106 if used in motor vehicle air brake applications.

PERMANENT REUSABLE

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

CatalogNumber

Y104Y106Y108

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .62 225 900 2.5 15 GR**-GT†† 1113/8 .75 225 900 3.5 18 GR**-GT†† 1111/2 .87 225 900 4.0 23 GR**-GT†† 111

BRAIDED

HOSE

† Bulk tubing sales only, no coupling.

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

†† Requires special tooling. Contact Dayco Eastman

Page 38: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

BRAIDED

HOSE

GENERAL

INFORMATION

COUPLINGS

MISC

EQUIPMENT

Specialty Hose

69

Applications: Low expansion hose for hydraulic brake hoseassemblies to be used in hydraulic braking systems of “off-road”vehicles. Compatible with DOT-3 and DOT-4 and most non-petrole-um brake fluids. Not compatible with mineral oil based brake fluids.

Temperature Range: -55˚ F to +250˚ F

Tube: EPDM

Reinforcement: Two textile braids

Cover: EPDM

FACTORY ASSEMBLIES ONLYNOT TO BE USED ON "ON-ROAD" VEHICLES.

Y7SAE J1401 and DOT FMVSS 106Hydraulic (Off-Road) Brake Hose

PERMANENT REUSABLE

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

CatalogNumber

Y703

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/16 .47 1,500 8,000 2.5 8 GF 104

Applications: This LPG hose meets the Underwritersrequirements for:UL-558 Industrial Truck L.P. Gas Assemblies, recognizedcomponent (file AU1733) UL-569 Pigtails and Flexible Hose Connectors UL Labeled(file MH6925), 60 inch maximum length.

Temperature Range: -40˚F. to + 200˚F.

Tube: NitrileReinforcement: One textile braid

Cover: Neoprene

FACTORY MADE ASSEMBLIES ONLY,TO COMPLY WITH UL REGULATIONS

W5LPG HoseUL Listed

PERMANENT REUSABLE

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

CatalogNumber

W506

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/8 .69 350 1,750 4 17 GF 104

SPECIALTY

HOSE

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

Page 39: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

Specialty HoseGENERAL

INFORMATION

BRAIDED

HOSE

COUPLINGS

MISC

EQUIPMENT 70

Applications: Used for lubrication lines and grease whiphose. Use with hand grease guns only.

Temperature Range: -40˚ F to +120˚ F

WARNING: Do not use as whip hose on power grease guns!

Tube: Polyester

Reinforcement: One braid of polyester fiber

Cover: Black abrasion resistant polyurethane

HLBHytron® Grease Hose

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

HLB02

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/8 .32 3,000 12,000 1.5 3 CY-GH† 92 BU 242

Applications: Used for medium pressure hot water sprayapplications including car and power washers

Temperature Range: -30˚ F to +225˚ F

Tube: Thermoplastic rubber

Reinforcement: One braid of high tensile steel wireCover: Non-marking synthetic rubber

Colors: Red - RD; Blue - BL; Black - BKNote: HSH204 available red cover only.

HSH2 Tempest II®

Hot Water Spray PERMANENT REUSABLE

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

CatalogNumber

HSH204HSH206

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .52 3,000 12,000 4.0 13 CY-GH† 923/8 .67 3,000 12,000 5.0 20 CY-GH† 92 BA-BB 227

SPECIALTY

HOSE

SPIRAL

HOSE

† Requires special tooling. Contact Dayco Eastman.*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

Page 40: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

BRAIDED

HOSE

GENERAL

INFORMATION

COUPLINGS

MISC

EQUIPMENT

Specialty Hose

71

Applications: Static conductive, airless paint spray hose.High volumetric expansion rate and long impulse life. Tuberesists paints, lacquers and thinners

Temperature Range: -40˚ F to +180˚ F

FACTORY MADE ASSEMBLIES ONLY

Tube: Natural nylon

Reinforcement: Two braids of synthetic fiber with a metal platedconductive yarn as part of the braid

Cover: Black abrasion resistant polyurethane (non-pin-pricked)

Applications: Static conductive, airless paint spray hose.High volumetric expansion rate and long impulse life. Tuberesists paints, lacquers and thinners

Temperature Range: -40˚ F to +180˚ F

FACTORY MADE ASSEMBLIES ONLY

Tube: Natural nylon

Reinforcement: One braid (HPS03 and HPS04) or two braids(HPS06) of synthetic fiber with a metal plated conductive yarn.

Cover: Black abrasion resistant polyurethane (non-pin-pricked)

HPSHytron® Paint Spray Hose

HPCHytron® Paint Spray Hose

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

HPC04

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .52 3,300 13,200 2.0 7 HY 132

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

HPS03HPS04HPS06

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/16 .40 3,300 13,200 2.0 5 CD1/4 .50 3,000 12,000 2.0 7 HY 1323/8 .73 3,300 13,200 4.0 13 HY 132

SPECIALTY

HOSE

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

Page 41: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

Specialty HoseGENERAL

INFORMATION

BRAIDED

HOSE

COUPLINGS

MISC

EQUIPMENT 72

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

Applications: Static conductive, airless paint spray hosewhich offers excellent resistance to kinking, abrasion and cut-ting. Tube resists paints, lacquers and thinners. Has a ratingof only one ohm/ft. of electrical resistance.

Temperature Range: -40˚ F to +180˚ F

Tube: Natural nylon

Reinforcement: One braid of high tensile steel wire

Cover: Blue abrasion resistant polyurethane (non-pin-pricked)

P3 Ever-Spray®

Hytron® Paint Spray Hose

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

P304

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .46 3,000 12,000 2.0 10.0 CY 92

Applications: Used on high pressure sewer cleaning equipment

Temperature Range: -40˚ F to +125˚F

Available Lengths: 3/4" 400', 500' 600' and 800'1" 300',400', 500', 600', 700' and 800'1-1/4" 400', 500', 600', 700', and 800'1-1/2” 400’ and 500’

Male pipe thread each endMeets NSWMA Requirements (except -24)

Tube: Red polyester (-12, -16, -20)Natural Nylon (-24)

Reinforcement: One braid of polyester fiber (-12, -16)Two braids of polyester fiber (-20, -24)

Cover: Orange abrasion resistant polyurethane (pin-pricked)Sold as assemblies only

S6 Predator®

Hytron® Sewer Cleaning Hose

† SQ coupling are swageable using the SQ-101-SW swagersee page 73

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

S612S616S620S624

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius Kink 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) Radius (pounds) Series Page # Series Page #

3/4 1.14 2,500 6,250 4.0 2.0 29 HY-SQ† 1951 1.41 2,500 6,250 6.0 3.0 38 HY-SQ† 195

1-1/4 1.78 2,500 6,250 12.0 9.0 61 SQ† 1951 1/2 2.10 2,500 6,250 15.0 12.0 83 JJ 168

SPECIALTY

HOSE

Page 42: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPECIALTY

HOSE

BRAIDED

HOSE

GENERAL

INFORMATION

COUPLINGS

MISC

EQUIPMENT

Specialty Hose

73

Applications: For use on high pressure sewer cleaningequipment

Temperature Range: -40 ̊F to +125 ̊F

Available Lengths: 300', 400', 500' and 600'Male pipe thread each endMeets NSWMA Requirements

Tube: Red polyester (red color tube identifies Dayco Eastmanas manufacturer)

Reinforcement: One braid of polyester fiber

Cover: Blue abrasion resistant polyurethane (pin-pricked)

Sold as assemblies only.

S9 Predator®

Hytron® Sewer Cleaning Hose

SQ-101-SW SwagerFor field assembly of Dayco Eastman S6 (-12 & -16) Predator® sewer cleaning hose. It's a tool designed for municipalitiesand sewer cleaning contractors which will give the user the ability to repair and extend the life of a reel of hose, should dam-age occur. Only SQ couplings may be swaged by using the SQ-101-SW.The SQ-101-SW swager, couplings and hose tube are color coded red, making it easy to identify that the components aremade by Dayco Eastman. By following Predator® hose inspection instruction card, P-1211(included with each reel of hose),and swage assembly instructions, the user can be assured of making an acceptable hose assembly.

DIES AND PUSHERS:SQ-101-12S6/S9 -12 size die for S6 and S9 hoseSQ-101-12P -12 size pusherSQ-101-16S6 -16 size die for S6 hose (only)SQ-101-16S9 -16 size die for S6 hose (only)SQ-101-16P -16 size pusherSQ-101-20S6 -20 size die for S6 hose (only)SQ-101-20P -20 size die pusher SQ-101-SW

A B C DCat. Hose Cut HexNo. I.D. Thread O.A.L. Off Orifice Size

SQ12-12MP 3/4 3/4-14 3.08 1.48 .61 1 1/4SQ16-16MP 1 1-11 1/2 3.42 1.69 .81 1 3/8SQ20-20MP 1 1/4 1 1/4-11 1/2 3.84 1.84 1.03 1 3/4

Style MPMale NPTF

A B CCat. Hose CutNo. I.D. O.A.L. Off Orifice

SQ12-12RM 3/4 3.70 .52 .61SQ16-16RM 1 4.00 .53 .81SQ20-20RM 1 1/4 4.53 .53 1.03

Style RMHose Splicer

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

S912S916

Max. Min. Min.Working Burst Bend Kink Per

I.D. O.D. Pressure Pressure* Radius Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (Inches) (pounds) Series Page # Series Page #

3/4 1.15 3,000 7,500 4.0 2 30 HY-SQ† 1951 1.47 3,000 7,500 8.0 3 46 HY-SQ† 195

SPECIALTY

HOSE

† SQ coupling are swageable using the SQ-101-SW swager. *Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

Page 43: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

GENERAL

INFORMATION

BRAIDED

HOSE

COUPLINGS

MISC

EQUIPMENT 74

Specialty Hose

Applications: Used on high pressure water jetting equipment

Temperature Range: -40˚ F to +125˚ F

Available Lengths: 400 ft., 500 ft., and 600 ft.Male pipe thread each end

Tube: Polyester

Reinforcement: One braid of aramid fiber (S508)Two braids of polyester fiber (S510)

Cover: Black abrasion resistant polyurethane (pin-pricked)Sold as assemblies only.

S5 Predator®

Hytron® Water Jetting Hose

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

PERMANENT REUSABLE

CatalogNumber

S508S510

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/2 .80 4,000 16,000 4.0 16 HY 1325/8 1.06 4,000 12,000 5.0 32 JJ 168

Applications: Used for high pressure jack line applicationsMeets IJ-100 requirements

Temperature Range: -40˚ F to +150˚ F

FACTORY AUTHORIZED ASSEMBLY ONLYWARNING TAG AND SPRING GUARDS REQUIRED

Tube: Polyester

Reinforcement: Two braids of high tensile steel wire

Cover: Neoprene–MSHA approved

HJK Highjack®PERMANENT REUSABLE

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

CatalogNumber

HJK04

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .60 10,000 30,000 4.0 27 HY 132

SPECIALTY

HOSE

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

Page 44: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

BRAIDED

HOSE

GENERAL

INFORMATION

COUPLINGS

MISC

EQUIPMENT75

Specialty Hose

Applications: Used for high pressure water blast applications

Temperature Range: 0˚ F to +200˚ F

Tube: Neoprene

Reinforcement: Four spiraled layers of high tensile steel wire

Cover: Oil and weather resistant synthetic rubber–MSHA approved

WBWater-Blast Hose PERMANENT REUSABLE

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

CatalogNumber

WB12WB16

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/4 1.33 7,500 22,500 9.5 120 BW 811 1.59 7,500 22,500 12.0 162 BW 81

Applications: Used for high pressure water blast applications

Temperature Range: 0˚ F to +200˚ F

Tube: Neoprene

Reinforcement: Four spiraled layers of high tensile steel wire

Cover: Oil and weather resistant synthetic rubber–MSHA approved

W7Water-Blast Hose PERMANENT REUSABLE

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

CatalogNumber

W704W706W708

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

1/4 .79 10,000 30,000 4.0 55 KC 1843/8 .81 10,000 30,000 6.0 59 JJ 1681/2 1.00 10,000 30,000 8.0 82 JJ 168

SPECIALTY

HOSE

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

Page 45: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

GENERAL

INFORMATION

BRAIDED

HOSE

COUPLINGS

MISC

EQUIPMENT 76

Specialty Hose

Applications: Used for ultra-high pressure water blast applications

Temperature Range: +40˚ F to +150˚ F

FACTORY ASSEMBLY ONLY

Tube: Neoprene

Reinforcement: Four spiraled layers of high tensile steel wire

Cover: Oil and weather resistant synthetic rubber–MSHA approved

W8Water-Blast

Ultra-High PressurePERMANENT REUSABLE

HOSE BEND WEIGHTSIZE (NOMINAL) PRESSURE RADIUS (APPROX.) COUPLING RECOMMENDATIONS

CatalogNumber

W806W808

Max. Min. Min.Working Burst Bend Per

I.D. O.D. Pressure Pressure* Radius 100 Ft.(Inches) (Inches) (PSI) (PSI) (Inches) (pounds) Series Page # Series Page #

3/8 .94 18,000 45,000 9.5 78 ER 971/2 1.06 15,000 37,500 10.0 91 ER 97

SPECIALTY

HOSE

*Burst pressure is for reference and design purposes only andis no indication that the product should be used above theindicated related working pressure.

Page 46: Hydraulic Hoses and Couplings - Airline Hydraulics · Hydraulic Hoses and Couplings ... Used for suction or return line on hydraulic systems. Vacuum 25 inches Hg. ... C12 C16 C20

SPIRAL

HOSE

BRAIDED

HOSE

GENERAL

INFORMATION

COUPLINGS

MISC

EQUIPMENT77

Hytron® HoseTwin and Multi-Line Hytron® Hose

“Twin” Hytron® hoses are available in the sizes and styles shown below. Basictwin line construction consists of two pieces of hose joined together to offer acompact and flexible system. Minimum order quantity is 250 feet for these partnumbers and hose is shipped bulk packed.

“Multi-Line” Hytron® hoses are also available upon quotation. These lines mayconsist of two or more Hytron® hoses joined together, including multi-lines of dif-ferent Hytron® hose styles. Minimum purchase quantities are required.

Dayco Eastman is also pleased to quote your specific assembly and lengthrequirements. Please note that minimum order quantities apply to these specialorder items.

Part Number Description

TC204 Twin-Line C2, SAE 100R7 Low temperature; 1/4” I.D. (inches)TC205 Twin-Line C2, SAE 100R7 Low temperature; 5/16” I.D. (inches)TC206 Twin-Line C2, SAE 100R7 Low temperature; 3/8” I.D. (inches)

TNR7E04 Twin-Line NR7E, SAE 100R7 Nylon tube, Non-conductive; 1/4” I.D. (inches)TNR7E06 Twin-Line NR7E, SAE 100R7 Nylon tube, Non-conductive; 3/8” I.D. (inches)TNR7E08 Twin-Line NR7E, SAE 100R7 Nylon tube, Non-conductive; 1/2” I.D. (inches)

TNR704 Twin-Line NR7, SAE 10R7 Nylon tube; 1/4” I.D. (inches)TNR706 Twin-Line NR7, SAE 10R7 Nylon tube; 3/8” I.D. (inches)TNR708 Twin-Line NR7, SAE 10R7 Nylon tube; 1/2” I.D. (inches)

TS7E04 Twin-Line S7E, SAE 100R7, Non-conductive; 1/4” I.D. (inches)TS7E05 Twin-Line S7E, SAE 100R7, Non-conductive; 5/16” I.D. (inches)TS7E06 Twin-Line S7E, SAE 100R7, Non-conductive; 3/8” I.D. (inches)TS7E08 Twin-Line S7E, SAE 100R7, Non-conductive; 1/2” I.D. (inches)

TS704 Twin-Line S7, SAE 100R7; 1/4” I.D. (inches)TS705 Twin-Line S7, SAE 100R7; 5/16” I.D. (inches)TS706 Twin-Line S7, SAE 100R7; 3/8” I.D. (inches)TS708 Twin-Line S7, SAE 100R7; 1/2” I.D. (inches)

TS8E04 Twin-Line S8E, SAE 100R8, Non-conductive; 1/4” I.D. (inches)TS8E06 Twin-Line S8E, SAE 100R8, Non-conductive; 3/8” I.D. (inches)TS8E08 Twin-Line S8E, SAE 100R8, Non-conductive; 1/2” I.D. (inches)

TS804 Twin-Line S8, SAE 100R8; 1/4” I.D. (inches)TS806 Twin-Line S8, SAE 100R8; 3/8” I.D. (inches)TS808 Twin-Line S8, SAE 100R8; 1/2” I.D. (inches)

SPECIALTY

HOSE