HYPACK MAX Training Seminar 2004HYPACK MAX Training Seminar 2004 11

Advanced Survey TopicsAdvanced Survey Topics

Multivessel & Specialty DriversMultivessel & Specialty Drivers

Demonstrations of operating with more than Demonstrations of operating with more than one vessel & specialty device drivers.one vessel & specialty device drivers.

HYPACK MAX Training Seminar 2004HYPACK MAX Training Seminar 2004 22

Case 9.a.Case 9.a.

Multiple Vessel OverviewMultiple Vessel Overview

Setting up a demonstration with four vessels.Setting up a demonstration with four vessels.

PROJECT: SAMPLE SPECIAL SURVEY 2004PROJECT: SAMPLE SPECIAL SURVEY 2004

Configuration: FourBoat.INIConfiguration: FourBoat.INI

HYPACK MAX Training Seminar 2004HYPACK MAX Training Seminar 2004 33

Remember This?Remember This?

Start HYPACK HARDWARE

Click ‘Add Device’

Select Device Driver

Specify DeviceType

Specify Options

RecordingInfo

ConnectionInfo

SpecifyOffsets

Range/Az orRange/Range?

Specify StationCoordinates

Specific DeviceSetup

More Devices?

NoNo

YesYes

YesYes

More than 1 Vessel?

Add Each Vessel

Assign DevicesTo Vessels

Test Each DeviceBy Itself

Test All Devices At Once

StartStartSURVEYSURVEY

Device Driver SetupDevice Driver Setup Multiple VesselMultiple Vessel Device TestingDevice Testing

YesYes

NoNo

NoNo

Case 9.a

Case 5.c

It’s time to learn It’s time to learn how to set up how to set up multiple vessels!multiple vessels!

HYPACK MAX Training Seminar 2004HYPACK MAX Training Seminar 2004 44

Simplified…Simplified…

Set up a separate driver for every device on every

vessel

Add Each Vessel

Assign DevicesTo Vessels

Test Each DeviceBy Itself

Test All Devices At Once

StartStartSURVEYSURVEY

Device Driver SetupDevice Driver Setup Multiple VesselMultiple Vessel Device TestingDevice Testing

Case 9.a

Case 5.c

Hardware ProgramHardware Program

HYPACK MAX Training Seminar 2004HYPACK MAX Training Seminar 2004 55

Multiple Vessel DemoMultiple Vessel Demo Open ‘Sample Open ‘Sample

Special Survey 2004 Special Survey 2004 Project.Project.

Start HARDWARE.Start HARDWARE. Click ‘File – Open Click ‘File – Open

Configuration’.Configuration’.• Select FourBoat.INISelect FourBoat.INI

Exit HARDWARE.Exit HARDWARE. Start SURVEY.Start SURVEY.

Let’s see how we did Let’s see how we did it.it.

HYPACK MAX Training Seminar 2004HYPACK MAX Training Seminar 2004 66

Four Boat Setup - DriversFour Boat Setup - Drivers The first step is to set up all of the device The first step is to set up all of the device

drivers.drivers. For our simulation, I have four boats.For our simulation, I have four boats.

• Boat1:Boat1: Loop.XYZLoop.XYZ GENDEVALL.DLLGENDEVALL.DLL• Boat2:Boat2: Loop2.XYZLoop2.XYZ GENDEVALL.DLLGENDEVALL.DLL• Boat3:Boat3: Loop3.XYZLoop3.XYZ GENDEVALL.DLLGENDEVALL.DLL• Boat4:Boat4: Loop4.XYZLoop4.XYZ GENDEVALL.DLLGENDEVALL.DLL

For each boat:For each boat:• Click ‘Devices - Add Device’Click ‘Devices - Add Device’

Select GENDEVALL.DLLSelect GENDEVALL.DLL Set Type to Position, Heading & DepthSet Type to Position, Heading & Depth

• Click ‘Connect’Click ‘Connect’ Set to ‘Data File’Set to ‘Data File’ Pick XYZ file as listed above.Pick XYZ file as listed above.

• Click ‘Setup’Click ‘Setup’ Set as shown.Set as shown.

More than 1 More than 1 Vessel?Vessel?

Add Each Vessel

Assign DevicesTo Vessels

Multiple VesselsMultiple Vessels

11

22

33

HYPACK MAX Training Seminar 2004HYPACK MAX Training Seminar 2004 77

Four Boat Setup: Create VesselsFour Boat Setup: Create Vessels

For each additional vessel:For each additional vessel:• Click ‘Other Mobiles – Add’Click ‘Other Mobiles – Add’• Enter a name for the vessel.Enter a name for the vessel.

Boat 2Boat 2 Boat 3Boat 3 Boat 4Boat 4

• Vessel names are added to the Other Mobiles list as your Vessel names are added to the Other Mobiles list as your create each one.create each one.

1

2

3

HYPACK MAX Training Seminar 2004HYPACK MAX Training Seminar 2004 88

Four Boat SetupFour Boat SetupAssigning Drivers to VesselsAssigning Drivers to Vessels

Click ‘Other Vessels’ Click ‘Other Vessels’ and Vessel Nameand Vessel Name

Transfer devices Transfer devices assigned to the vessel assigned to the vessel by clicking on each by clicking on each device and then device and then clicking the left arrow.clicking the left arrow.• You can assign You can assign

multiple devices to multiple devices to each vessel.each vessel.

1

2

3

HYPACK MAX Training Seminar 2004HYPACK MAX Training Seminar 2004 99

Driver Assignment CheckDriver Assignment Check

You can check on the driver and vessel assignments by You can check on the driver and vessel assignments by clicking on ‘Devices’.clicking on ‘Devices’.• Drivers assigned to any vessel other than the main (default) Drivers assigned to any vessel other than the main (default)

vessel will show their assignment:vessel will show their assignment: ‘‘Device Name’ installed on ‘Vessel Name’Device Name’ installed on ‘Vessel Name’

HYPACK MAX Training Seminar 2004HYPACK MAX Training Seminar 2004 1010

Testing DevicesTesting Devices

Click ‘Test – Test All’Click ‘Test – Test All’ Click ‘Window – Tile’Click ‘Window – Tile’

• You should be able You should be able to see each driver to see each driver updating.updating.

HYPACK MAX Training Seminar 2004HYPACK MAX Training Seminar 2004 1111

Multiple Vessels in SURVEYMultiple Vessels in SURVEY

The Data Display window contains a complete list of items for each vessel.The Data Display window contains a complete list of items for each vessel. Vessel symbol color = Color of info in Data Display WindowVessel symbol color = Color of info in Data Display Window Right-click on a vessel to assign its symbol color, fill color, track Right-click on a vessel to assign its symbol color, fill color, track

parameters (visible, length, color) and label.parameters (visible, length, color) and label.