6
AVAILABLE 2017 E-Xtreme ® Titanium plasma protected 3.000 hours in salt spray tests www.ilme.com i c o r r o s i o n - p r o o f s t o n e - c h i p r e s i s t a n t E-Xtreme ® series

i E-Xtreme - ILME€¦ · Standard practice for operating salt spray (fog) apparatus Connectors for electronic equipment - Tests and measurement Environmental testing - Part 2-68

  • Upload
    doanh

  • View
    216

  • Download
    0

Embed Size (px)

Citation preview

AVAILABLE 2017

E-Xtreme®

Titaniumplasma protected3.000 hours in salt spray tests

www.ilme.comi

corros

ion-proo

f • stone-chip resistant

E-Xtreme®

series

V-Type lever versionFor extreme environments as: icing, very low temperatures, impact resistant, salt mistand chemical resistant. The lever handle is in stainless steel and the locking device guaranteesan IP66/IP67 protection degree.

AVAILABLE 2017

E-Xtreme® seriesCORROSION-PROOF METAL ENCLOSURES 3.000 HOURS IN SALT SPRAY TESTS

salt mist

frequentmatings

E-Xtreme

® forwind turbines

E-Xtre

me® for

automationplants

V-Typelever

E-Xtre

me® fo

r railway applications

AVAILABLE 2017

C-Type lever versionFor extreme environments as: salt mist, UV radiations, chemical resistant and frequent matings.The lever handle is in polyamide and stainless steel and the locking device guarantees an IP65/IP66protection degree.

impactresistant

UV radiations

icing

very lowtemperatures

chemicalresistant

www.ilme.comi

E-Xtre

me® fo

r petrochemicalenvironments

C-Typelever

E-Xtre

me®for

outside salt-sprayers E-Xtre

me® fo

r naval environments

ADVANTAGESMetal hoods and housings intended for extremely demanding environments, with special protective treatment under painting.Their special patented protective coating assures a high level of protection against the corrosion even in case of long termexposure to salt mist.

impactresistant

UV radiations

icing

very lowtemperatures

chemicalresistant

l corrosion-proof aluminiumwith a special coatingunder the powder paintingcolour RAL 7016 dark grey

l IP66, IP67, IP69 protection degree (EN 60529)

l FKM gasket (-40 °C...+180 °C)or silicone gasket (-60 °C...+180 °C)

l 3.000 hoursin salt spray tests

l durable protectionagainst damage caused by stone-chip, icing, saltmist, UV radiations andharsh gases

l V-Type lever or C-Type lever,hoods with moulded pegsor riveted stainless steelbolts

icing

very lowtemperatures

salt mist

impactresistant

UVradiations

chemicalresistant

MaterialPaintingColourLocking lever, springs and pegsLever handle

GasketSilicon-based compoundsEN ISO 9227 Ed 2.0

Temperature limitsDegree of protection according to IEC/EN 60529(in mated and locked condition)(IP69K according to ISO 20653, former DIN 40050-9)Stone chipping testDust and sand blasting testVibration test

Shock testUV resistanceOzone resistanceChemical resistance

Aluminum die-castEpoxy powder coatingRAL 7016 (dark grey)Stainless steelC-Type lever (+125 °C): PolyamideV-Type lever (+180 °C): Stainless steelFKMFree3.000 hours (V-Type lever and hood with moulded pegs)2.000 hours (C-Type lever and hood with riveted stainless steel bolts)-40 °C… +125 °C (-60 °C… +180 °C with silicone gasket)IP65, IP66, IP67, IP68 (CG), IP69, IP69K

ISO 20567-1EN 60068-2-68EN 61373 cat. 1B, 3 axisEN 60068-2-6 10÷500 Hz 0,35mm/5g break point 60.1 Hz 3 axisEN 61373 cat. 1B, 3 axisEN ISO 4892-2, EN 50467 on locked housingsEN 50467 on locked housingsCleaning fluids, anti-freezing fluids, mineral and synthetic oils, cooling fluids, diesel fuel

EN 61984:2010-04EN 60529:2001-02EN ISO 9227 Ed 2.0ASTM B117-09EN 60512 (series)EN 60068-2-68: 1996EN ISO 20567-1: 2005

Connectors - Safety requirements and testsDegrees of protection provided by enclosures (IP code)Corrosion tests in artificial atmospheres - Salt spray testsStandard practice for operating salt spray (fog) apparatusConnectors for electronic equipment - Tests and measurementEnvironmental testing - Part 2-68: Tests - Test L: Dust and sandPaints and varnishes -- Determination of stone-chip resistanceof coatings -- Part 1: Multi-impact testing

applicable test standards

general specifications

TECHNICAL DETAILSThe protection is granted also in case of impact with stones and sand. The materials are able to withstand UV radiations,a wide temperature range and harsh chemicals. The E-Xtreme® series is available in the full range of Ilme aluminum hoods andhousings versions.

www.ilme.comi

Titaniumplasma protected3.000 hours in salt spray tests

corros

ion-proo

f • stone-chip resistant

E-Xtreme®

series

www.ilme.comi

Choose your connector

XD

G X

TR

317

Cata

log

ues

I.L.M.E. SpAVia Marco Antonio Colonna, 920149 Milano - Italywww.ilme.com

corros

ion-proo

f • stone-chip resistant

E-Xtreme®

series