Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
I LIKE TOMAKESTUFF
PROJECT PLANS
v. 1.1
WATCH THE VIDEO:
http://ilt.ms/plans/bedside-table
bedside table
Cut List
1” Hardwood
1” Steel Square Tubing
1 1/2” Steel Flat Bar
18" x 11 1/2" 45.7 cm x 29.2 cm
25" (63.5 cm)
18" (45.7 cm)
11 1/2" (29.2 cm)
9 1/2" (24.1 cm)
2" (51 mm)
X 2
X 2X 2
X 2
2 2 11
4 2
Step 1 Cut boards for shelves
x 2
You can customize the length and width to the size of table you need. The 1” depth matches the square tubing we will use for the frame.
© 2020 I Like to Make Stuff, LLC 2 www.iliketomakestuff.com
Step 2 Cut square tubing for ends
x 4
x 2
Cut 45º miters on one side of the uprights and both sides of the top pieces.
© 2020 I Like to Make Stuff, LLC 3 www.iliketomakestuff.com
Step 3 Weld together the stand ends
© 2020 I Like to Make Stuff, LLC 4 www.iliketomakestuff.com
Step 4 Cut lower braces and weld to ends
x 2
© 2020 I Like to Make Stuff, LLC 5 www.iliketomakestuff.com
Step 5 Cut back pieces and weld frames together
x 2
© 2020 I Like to Make Stuff, LLC 6 www.iliketomakestuff.com
Step 6 Cut flat-bar tabs and weld to frame
x 12
© 2020 I Like to Make Stuff, LLC 7 www.iliketomakestuff.com
Step 7 Drill holes into tabs
You can use a stepped drill bit on both sides of each tab to make a counter-sunk hole.
© 2020 I Like to Make Stuff, LLC 8 www.iliketomakestuff.com
Step 8 Install shelves
© 2020 I Like to Make Stuff, LLC 9 www.iliketomakestuff.com
YOU MADE IT!
For more videos and project plans, visit
www.iliketomakestu�.com
© 2020 I Like to Make Stuff, LLC 10 www.iliketomakestuff.com