3
R Specifications & design are subject to change without prior notice. Please visit CTC Union website for more details. www.ctcu.com / [email protected] 3-1 3 The FRM220A series is an Ethernet based aggregation platform, which incorporates a 24+4 port L2 Gigabit Ethernet switch (FRM220A- GSW/SNMP(n) or a new 20+4 port L2 Gigabit Ethernet switch with 4x10Gigabit uplink (FRM220A-GSW/SNMP-10G). The FRM220A has a built-in Gigabit Ethernet backplane to interconnect the Ethernet access with the FRM220-GSW/SNMP card. The L2 switch card supports many advanced Layer 2 switch technologies including port and tag based VLAN, QoS, LACP, RSTP to name just a few. The FRM220A chassis solution significantly lowers the OPEX for operator and service provider when deploying fiber access networks. Specifications Physical Specifications Dimensions 303 x 438 x 88 mm (D x W x H) Weight (w/o Power) 5.2kg Power AC 18~240VAC DC24 18~36VDC DC48 36~72VDC Temperatures Operating 0~60°C Storage -10~70°C Humidity 5%~90% non-condensing MTBF 65,000 hrs Certification FCC Class A, VCCI Class A, CE, RoHS compliant Chassis Overview 10G Ethernet Aggregation Switch Platform-FRM220A Ethernet Aggregation Switch Platform - FRM220A iAccess TM The FRM220A chassis incorporates an Ethernet trunk card (FRM220A-GSW/SNMP-10G), for grooming traffic from all twenty (20) card slots and for Device Management. This card has four (4) uplink ports of either 1G/10G SFP+, depending on model, and is built with GbE interfaces to connect the backplane with each slot of FRM220A chassis. The FRM220A-GSW/SNMP-10G Ethernet switch trunk card transmits Ethernet between the subscriber equipment (bridge/modem or network interface card) and provides a user-networking interface with Ethernet packets. 1G/10G Uplink Ethernet Aggregation Switch Card FRM220A-GSW/SNMP-10G 10G uplink Ethernet Aggregation Switch Card with In-Band Management Gigabit uplink Ethernet Aggregation Switch Card with In-Band Management FRM220A-GSW/SNMP(n) Provides chassis aggregation via 4x1G/10Gigabit Base-X SFP/SFP+ plus 4x10/100/1000Base-T uplink ports Supports IEEE 802.1p HW based 8 priority queues and L2~L4 QoS functions Supports IPv6 management Provides Web (https), Telnet, SSHv2, SNMP(V1, V2c, V3) management interfaces Supports secure authentication by IEEE802.1x, RADIUS or TACACS+ Supports IEEE802.1D/802.1w/802.1s for ring protection on all interfaces Supports IEEE 802.1Q tagged VLAN and IEEE 802.1ad Q-in-Q application (Front Side) 2U 19” 20-slot Rackmount Chassis Redundant Power Cooling Fan Cooling Fan 10G/1G Ethernet Aggregation Switch Card (Rear Side) Version 2021 Jan. 10G Ethernet Aggregation Switch Platform FRM220A

iAccess Ethernet Aggregation Platform - CTC U · 2019. 12. 31. · FRM220A-CH20 with FRM220A-1000EAS/X Commercial Building SmartView EMS FRM220 Module Cards Benefit of FRM220A Chassis

  • Upload
    others

  • View
    14

  • Download
    0

Embed Size (px)

Citation preview

Page 1: iAccess Ethernet Aggregation Platform - CTC U · 2019. 12. 31. · FRM220A-CH20 with FRM220A-1000EAS/X Commercial Building SmartView EMS FRM220 Module Cards Benefit of FRM220A Chassis

R

Specifications & design are subject to change without prior notice. Please visit CTC Union website for more details. www.ctcu.com / [email protected] 3-1

3

The FRM220A series is an Ethernet based aggregation platform, which incorporates a 24+4 port L2 Gigabit Ethernet switch (FRM220A-GSW/SNMP(n) or a new 20+4 port L2 Gigabit Ethernet switch with 4x10Gigabit uplink (FRM220A-GSW/SNMP-10G). The FRM220A has a built-in Gigabit Ethernet backplane to interconnect the Ethernet access with the FRM220-GSW/SNMP card. The L2 switch card supports many advanced Layer 2 switch technologies including port and tag based VLAN, QoS, LACP, RSTP to name just a few. The FRM220A chassis solution significantly lowers the OPEX for operator and service provider when deploying fiber access networks.

SpecificationsPhysicalSpecifications

Dimensions 303 x 438 x 88 mm (D x W x H)

Weight (w/o Power) 5.2kg

Power AC 18~240VAC

DC24 18~36VDC

DC48 36~72VDC

Temperatures Operating 0~60°C

Storage -10~70°CHumidity 5%~90% non-condensingMTBF 65,000 hrsCertification FCC Class A, VCCI Class A, CE, RoHS compliant

Chassis Overview

10G Ethernet Aggregation Switch Platform-FRM220A

Ethernet Aggregation Switch Platform - FRM220A

iAccessTM

The FRM220A chassis incorporates an Ethernet trunk card (FRM220A-GSW/SNMP-10G), for grooming traffic from all twenty (20) card slots and for Device Management. This card has four (4) uplink ports of either 1G/10G SFP+, depending on model, and is built with GbE interfaces to connect the backplane with each slot of FRM220A chassis. The FRM220A-GSW/SNMP-10G Ethernet switch trunk card transmits Ethernet between the subscriber equipment (bridge/modem or network interface card) and provides a user-networking interface with Ethernet packets.

1G/10G Uplink Ethernet Aggregation Switch Card

FRM220A-GSW/SNMP-10G10G uplink Ethernet Aggregation Switch Card with In-Band Management

Gigabit uplink Ethernet Aggregation Switch Card withIn-Band Management

FRM220A-GSW/SNMP(n)

▪ Provides chassis aggregation via 4x1G/10Gigabit Base-X SFP/SFP+ plus 4x10/100/1000Base-T uplink ports ▪ Supports IEEE 802.1p HW based 8 priority queues and L2~L4 QoS functions ▪ Supports IPv6 management ▪ Provides Web (https), Telnet, SSHv2, SNMP(V1, V2c, V3) management interfaces ▪ Supports secure authentication by IEEE802.1x, RADIUS or TACACS+ ▪ Supports IEEE802.1D/802.1w/802.1s for ring protection on all interfaces ▪ Supports IEEE 802.1Q tagged VLAN and IEEE 802.1ad Q-in-Q application

(Front Side)

2U 19” 20-slot Rackmount Chassis Redundant Power Cooling Fan Cooling Fan10G/1G Ethernet Aggregation Switch Card

(Rear Side)

Version 2021 Jan.

10G Ethernet A

ggregation Switch Platform

FRM220A

Page 2: iAccess Ethernet Aggregation Platform - CTC U · 2019. 12. 31. · FRM220A-CH20 with FRM220A-1000EAS/X Commercial Building SmartView EMS FRM220 Module Cards Benefit of FRM220A Chassis

Specifications & design are subject to change without prior notice. Please visit CTC Union website for more details. www.ctcu.com / [email protected]

3

RingRecovery Time

1-2 seconds (min.)

FRM220A-CH20

FRM220A-CH20

FRM220A-CH20 FRM220A-CH20

FRM220A Cards

Benefit of FRM220A Chassis Platform

The products listed below are designed for FRM220A-CH20 Ethernet Aggregation Switch Applications

▌Enabling IP Transportation Protection Mechanism- STP/RSTP Featured Ring Protection

▪ Standard based but advanced fault protection systems ▪ Rapidly recovery path from failed connection (1-2 seconds min. recovery time)

10G Ethernet A

ggregation Switch Platform

FRM220A

10G Ethernet Aggregation Switch Platform-FRM220A

Ethernet Switch: FRM220A-2000EAS/1 & FRM220A-2000EAS/2

Inverse Mux: FRM220A-iMux4 / 8 / 16

Ethernet Switch: FRM220A-2000EAS/4F

Ethernet over E1 Converter: FRM220A-Eoe1/G(S)

▪ 10/100/1000Base-T and 100/1000Base-X SFP (2000EAS/1) ▪ 2x 10/100/1000Base-T and 2x 100/1000Base-X SFP (2000EAS/2) ▪ Standalone IP Based, Web GUI, Telnet and SNMP management ▪ Supports dying gasp ▪ Online local / remote F/W upgrade ▪ Supports local / remote IEEE 802.3ah OAM / IP management

▪ The FRM220A-iMUX4/8/16 connects one Fast Ethernet over 4E1/8E1/16E1 links

▪ Built-in GFP bridge operates at WAN rate ▪ Maximum 220ms delay variance between E1 link ▪ Unbalanced E1/BNC or balanced E1/RJ45 ▪ LED Alarm indication & Auto-Negotiation ▪ Supports MTU 1916 bytes

▪ 4-port 100/1000Base-X SFP ▪ Standalone IP Based, Web GUI, Telnet and SNMP management ▪ Supports dying gasp ▪ Supports Cisco® like CLI ▪ Online local / remote F/W upgrade ▪ Supports local / remote IEEE 802.3ah OAM / IP management

▪ Connects one Fast Ethernet over E1 links (2.048Mbps) ▪ Built-in GFP bridge operates at WAN rate ▪ Auto-Negotiation ▪ Unbalanced E1/BNC or balanced E1/RJ45 ▪ LED Alarm indication ▪ Support MTU 2046 bytes

Page 3: iAccess Ethernet Aggregation Platform - CTC U · 2019. 12. 31. · FRM220A-CH20 with FRM220A-1000EAS/X Commercial Building SmartView EMS FRM220 Module Cards Benefit of FRM220A Chassis

R

Specifications & design are subject to change without prior notice. Please visit CTC Union website for more details. www.ctcu.com / [email protected] 3-3

3SmartView

EMSSmartView

EMSRing

4x 10G

LACP

GbEIPTV VLAN 130

VoIP VLAN 110

Data VLAN 120

10GIPTV VLAN 130

VoIP VLAN 110

Data VLAN 120

InternetSIP ServerMPLS

Network

1G/10G

GbE GbE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Video Server

RADIUS ClientRADIUS Client

RADIUS ClientRADIUS Client

RADIUS Server

FRM220A-2000EAS/1FRM220A-2000EAS/1

SmartViewEMSRADIUS ClientRADIUS Client

Commercial Building

SmartViewEMS

FRM220A-CH20 with FRM220A-2000EAS/2

FRM220A-CH20 with FRM220A-2000EAS/1

FRM220A-2000EAS/2FRM220A-2000EAS/2

SmartViewEMS

SmartViewEMS

Ring4x 10G

LACP

GbEIPTV VLAN 130

VoIP VLAN 110

Data VLAN 120

10GIPTV VLAN 130

VoIP VLAN 110

Data VLAN 120

InternetSIP ServerMPLS

Network

1G/10G

GbE GbE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Video Server

RADIUS ClientRADIUS Client

RADIUS ClientRADIUS Client

RADIUS Server

FRM220A-2000EAS/1FRM220A-2000EAS/1

SmartViewEMSRADIUS ClientRADIUS Client

Commercial Building

SmartViewEMS

FRM220A-CH20 with FRM220A-2000EAS/2

FRM220A-CH20 with FRM220A-2000EAS/1

FRM220A-2000EAS/2FRM220A-2000EAS/2

▌LACP Enabled Traffic Aggregation- Fiber Redundant / Trunking Application

▪ Dynamic port aggregation or trucking to increase bandwidth between LACP peer devices ▪ Redundant paths to reduce network fault risk

▌Enabling VLAN & QoS Prioritized Multiple Play Services

▌Secured Access Control Enhancement - Centralized Management of Accessing the Network for user or device

10G Ethernet A

ggregation Switch Platform

FRM220A

10G Ethernet Aggregation Switch Platform-FRM220A 10G Ethernet Aggregation Switch Platform-FRM220A

4x 10G

LACP

SmartViewEMS

SmartViewEMS

FRM220A-CH20 FRM220A-CH20